Search Results

Search found 5009 results on 201 pages for 'multitouch keyboard'.

Page 104/201 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Geek it Up

  - by BuckWoody

  I’ve run into a couple of kinds of folks in IT. Some really like technology a lot – a whole lot –and others treat it more as a job. For those of you in the second camp, you can go back to your drab, meaningless jobs – this post is for the first group. I’m a geek. Not a little bit of a geek, a really big one. I love technology, I get excited about science and electronics in general, and I read math books when I don’t have to. Yes, I have a Star Trek item or two around the house. My daughter is fluent in both Monty Python AND Serenity. I totally admit it. So if you’re like me (OK, maybe a little less geeky than that), then go for it. Put those toys in your cubicle, wear your fan shirt, but most of all, geek up your tools. No, this isn’t an April Fool’s post – I really mean it. I’ve noticed that when I get the larger monitor, better mouse, cooler keyboard, I LIKE coming to work. It’s a way to reward yourself – I’ve even found that it makes work easier if I have the kind of things I enjoy around to work with. So buy that old “clicky” IBM keyboard, get three monitors, and buy a nice headset so that you can set all of your sounds to Monty Python WAV’s. And get to work. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Gateway ZA8 Netbook graphics Issue

  - by Hansel

  The graphics keep tearing and are barely usable anytime I try to use my Netbook. And I did a full install with Ubuntu so I'm pretty much stuck. These are the specs of the Netbook: Processor AMD Athlon™ 64 L110 Single-Core Processor (1.2GHz, 800MHz FSB, 512KB L2 Cache)6 Operating System Genuine Windows Vista® Home Basic (32-bit) with SP1 Display 11.6" HD WXGA Ultrabright™ LED-backlit Display (1366 x 768 resolution, 16:9 aspect ratio)7 Memory 2048MB DDR2 533MHz SDRAM Single Channel Memory8 Hard Drive 250GB SATA hard drive2 Color Classic and Elegant Design with Cherry Red finish Wireless Network 802.11b/g Wi-Fi CERTIFIED®3 Adapter AC Adapter Application Software Microsoft® Works, Microsoft® Money Essentials, Microsoft® Office Home and Student 2007 (60-day complimentary trial period)1 Battery 6-Cell Lithium Ion (5200mAh) Chassis Chassis with ATI Radeon® X1270 Graphics and AMD RS690E Chipset8 Dimensions (Box) 3.1" (H) x 14.8" (W) x 10.1" (D) or 80mm (H) x 376mm (W) x 256mm (D) Dimensions (System) 1.03" (H) x 11.26" (W) x 7.99" (D) or 26.4mm (H) x 286mm (W) x 203mm (D) External Ports (3) USB 2.0, VGA Connector Keyboard and Mouse Keyboard with Multi-Gesture Touchpad Media Card Reader Multi-in-1 Digital Media Card Reader (Memory Stick®, Memory Stick Pro™, MultiMediaCard, Secure Digital™, xD-Picture Card™) Network 10/100 Ethernet LAN (RJ-45 port) What can I do?

  Read the article

• How to Boost Your Mouse Pointing Accuracy in Windows

  - by The Geek

  Whether you are doing graphics/web design work or just taking screenshots, it’s often very difficult to move the mouse precisely enough to select pixels the way you’d like. Here’s a couple of ways to make it better. There’s a number of methods you can use, from configuring the default mouse settings, to enabling Mouse Keys to move the mouse pointer with the keyboard, or my favorite: Using the Precision Booster feature in IntelliPoint. Image by Rufus Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Ubuntu Font Family Now Available for Download Oh No! WikiLeaks Published Santa Claus’s Naughty List [Video] Remember the Milk Now Supports HTTPS Encryption for the Entire Session MTCrypt Is an Efficient Front End for Mounting TrueCrypt Volumes 10 Things You Should Do with Your New Android Phone Walking Through the Park on a Snowy Night Wallpaper

  Read the article

• Slick2D + LWJGL collision system

  - by Connor W

  So I've been learning java for a while and have explored slick and lwjgl before but went away from using Slick for a while. But I've recently gone back to using it (as I'm making a platformer and Tiled will be really helpful). But here's where my problems begin: collision. I have a player polygon and I check to see if it's colliding with my tiled map with this method: public static boolean playerCollisionWith() { for(int i = 0; i < Blockmap.entities.size(); i++) { Block entity1 = (Block) Blockmap.entities.get(i); if(playerPoly.intersects(entity1.poly)) { return true; } } return false; } This would work normally but I'm using a different method for movement. Instead of just adding a speed variable to the player's x axis. I move like this: if(Keyboard.isKeyDown(Keyboard.KEY_RIGHT)) { speedX = Math.min(5, speedX + 1); moving = true; playerPoly.setX(x); if(playerCollisionWith()) { speedX = -5; playerPoly.setX(x); } } That Math.min call is what is messing me up =. I can't just call speedX = -5, because when I do the player "bounces" when the right mouse button is down and it's colliding. Bounces as in flashes back and forth REALLY quickly. But I don't really know how I would make it so that collisions on the y axis would work either, whether the player is jumping or not. So if I could get some help with how to fix this problem that would be great. Thank you for the help!

  Read the article

• Focus follows mouse stops working when opening window from launcher and no click to focus

  - by user97600

  This is 12.04 default desktop (unity). I set it to focus follows mouse, and changed the menus to be on the window. This worked for a while, then some unknown even, maybe an upgrade maybe some other setting change caused it to stop working. There are many ways for this behavior to start but one reliable one is to bring a window to the foreground/focus with the launcher. Now the focus is stuck on that window and not just the window but the regions within the window so the close, maximize, minimize and menus do not work. I have to use mouse middle and then mouse right and then focus follows mouse is restored for a bit. The exact details of the mouse action aren't clear, sometimes it seems like just mouse middle helps, sometimes just right some times a desperate sequence of clicks :-( I have tried switching to the gnome desktop and it seems to occur less there but it is not eliminated. I have tried switching mice to an old wired USB mouse. I have tried creating a new account and that has not worked. I have observed "split focus" where to scroll button scrolls one one window but the input goes to another. I go trapped recently where my keyboard input went to libre office calc, but I was selecting the search term in the chrome address window. The selection "grayed" but the keyboard input for the search went to libre. Regions in windows have very confused focus. I have to work hard to get focus on for example the close gliph (X) or the minimize gliph (_).

  Read the article

• Can't customize the application switcher

  - by Byron Hawkins

  I'm trying to change the shortcut for switching applications from Alt+Tab to Ctrl+Tab, but changes in the System Settings > Keyboard > Shortcuts > Navigation are being ignored. Even if I disable the Switch applications shortcut entirely, it still maps to Alt+Tab. At one point I had some keys remapped with xmodmap, but since then I have deleted that configuration and rebooted. My keyboard layout settings are all defaults. The OS is Ubuntu 12.04, with all software updated this afternoon. It would also be nice to have the variation of application switching that includes one icon per window, instead of one icon per application, since I am frequently switching between windows of an application and would rather not wait for the switcher to realize I want a different window of the current application. My other Ubuntu 12.04 install has the application switcher that I like, but I'm not sure how to choose between them on this install (which was set up by my university department). Thanks if anyone can help me with this.

  Read the article

• Ubuntu 14.04, only wallpaper and a mouse cursor is showing

  - by Abhishek Verma

  I upgraded to Ubuntu 14.04 weeks ago, that was a fresh install. And as usual installed, Unity tweak tool, some themes, Chrome, eclipse etc. Today, while playing with Unity tweak tool, I mistakenly switched Window spread to off, and bang, no problem yet. After realizing what I did I switched it to on again and then, the title bar of all windows, the status bar (guessing it's called that), and the launcher disappeared. Now I was left with a mouse cursor and the Unity tweak tool window, without the title bar. I thought a restart is needed, but sadly no shutdown option to click on, moreover, the keyboard didn't worked, neither the hardware shutdown button. So, I pressed the reset button. After a mundane restart, I was welcomed by the wallpaper and the mouse cursor, moving, that's it. Searched everywhere for a working solution, found some solutions in AskUbuntu itself, but they where all old and required terminal to be used, but since my keyboard isn't working, no access to the terminal. So, ofcource the question isn't a dublicate, at least, IMHO. Also, I was working on an Android project and have got no backups, so I won't be going for a clean install, or else I will start crying watching my weeks of work being deleted, any solutions, please.

  Read the article

• Java game object pool management

  - by Kenneth Bray

  Currently I am using arrays to handle all of my game objects in the game I am making, and I know how terrible this is for performance. My question is what is the best way to handle game objects and not hurt performance? Here is how I am creating an array and then looping through it to update the objects in the array: public static ArrayList<VboCube> game_objects = new ArrayList<VboCube>(); /* add objects to the game */ while (!Display.isCloseRequested() && !Keyboard.isKeyDown(Keyboard.KEY_ESCAPE)) { for (int i = 0; i < game_objects.size(); i++){ // draw the object game_objects.get(i).Draw(); game_objects.get(i).Update(); //world.updatePhysics(); } } I am not looking for someone to write me code for asset or object management, just point me into a better direction to get better performance. I appreciate the help you guys have provided me in the past, and I dont think I would be as far along with my project without the support on stack exchange!

  Read the article

• Rotate around the centre of the screen

  - by Dan Scott

  I want my camera to rotate around the centre of screen and I'm not sure how to achieve that. I have a rotation in the camera but I'm not sure what its rotating around. (I think it might be rotating around the position.X of camera, not sure) If you look at these two images: http://imgur.com/E9qoAM7,5qzyhGD#0 http://imgur.com/E9qoAM7,5qzyhGD#1 The first one shows how the camera is normally, and the second shows how I want the level to look when I would rotate the camera 90 degrees left or right. My camera: public class Camera { private Matrix transform; public Matrix Transform { get { return transform; } } private Vector2 position; public Vector2 Position { get { return position; } set { position = value; } } private float rotation; public float Rotation { get { return rotation; } set { rotation = value; } } private Viewport viewPort; public Camera(Viewport newView) { viewPort = newView; } public void Update(Player player) { position.X = player.PlayerPos.X + (player.PlayerRect.Width / 2) - viewPort.Width / 4; if (position.X < 0) position.X = 0; transform = Matrix.CreateTranslation(new Vector3(-position, 0)) * Matrix.CreateRotationZ(Rotation); if (Keyboard.GetState().IsKeyDown(Keys.D)) { rotation += 0.01f; } if (Keyboard.GetState().IsKeyDown(Keys.A)) { rotation -= 0.01f; } } } (I'm assuming you would need to rotate around the centre of the screen to achieve this)

  Read the article

• How can I re-enable the typing break in 11.10?

  - by Hamish Downer

  I've just upgraded to beta 2 of Oneiric/11.10 and the typing break has gone. I've gone into the system settings and looked in "Keyboard Layout" and "Keyboard" and can't find anything. Has it just been dropped? Is there some hidden way to re-enable it? Update: Thought I'd write an update based on some stuff that has happened since this question (and the two answers) were written. Workrave has now been re-instated in oneiric-backports and for 12.04 (how to enable backports). It works fine, though if you want to put it in your systray then you need to allow it in there. The easy/lazy command line way to allow workrave into the notification area is to do something like: gsettings set com.canonical.Unity.Panel systray-whitelist "['all']" But read this question if you want a more detailed explanation about what you're doing here. Meanwhile the Gnome typing break has been split out into an app called DrWright, however it has not (at time of writing) been packaged for 11.10 (or later). And as mentioned in the other answer, another option is RSIBreak. It is a KDE app but works fine in Unity.

  Read the article

• How should developers handle subpar working conditions? [closed]

  - by ivar

  I have been working in my current job for less than a year and at the beginning didn't have the courage to say anything about the things that bothered me. Now I'm a bit fed up and need things to get better. The first problem is not random but I'll mention it anyway. We are running out of space so every new employee gets a smaller table. We are promised that the space problem will be fixed soon. Almost every employee has a different keyboard, mouse, headphones (if any). Mine are $10 keyboard, some random cheap mouse and some random crappy headphones with a mic. All these were used and dirty when I got them. The number of monitor is 1-3 and with different sizes. I have 2 nice monitors and can't complain but some are given 1 small monitor. When it's their first job they don't have the guts to ask for 2 even if most others have 2. Nobody seems to care too. Project manager asked if it's ok? He obviously said he can handle the 1 small one. Then the manager said you can go ask for 1 more. I'm watching this and think go and ask where? The company is trying to hire more people but is not doing much after the person has signed the contract. We are put in one room that is open to the hallway and it's super noisy. Almost like a zoo at times. Even if nobody is talking the crappy keyboards make too much noise. Is this normal? Am I too negative and should I just do my job with what I was given? Should I demand better things? Should the company have some system that everybody gets things in some price range?

  Read the article

• SFML - Moving a sprite on mouseclick

  - by Mike

  I want to be able to move a sprite from a current location to another based upon where the user clicks in the window. This is the code that I have: #include <SFML/Graphics.hpp> int main() { // Create the main window sf::RenderWindow App(sf::VideoMode(800, 600), "SFML window"); // Load a sprite to display sf::Texture Image; if (!Image.LoadFromFile("cb.bmp")) return EXIT_FAILURE; sf::Sprite Sprite(Image); // Define the spead of the sprite float spriteSpeed = 200.f; // Start the game loop while (App.IsOpened()) { if (sf::Keyboard::IsKeyPressed(sf::Keyboard::Escape)) App.Close(); if (sf::Mouse::IsButtonPressed(sf::Mouse::Right)) { Sprite.SetPosition(sf::Mouse::GetPosition(App).x, sf::Mouse::GetPosition(App).y); } // Clear screen App.Clear(); // Draw the sprite App.Draw(Sprite); // Update the window App.Display(); } return EXIT_SUCCESS; } But instead of just setting the position I want to use Sprite.Move() and gradually move the sprite from one position to another. The question is how? Later I plan on adding a node system into each map so I can use Dijkstra's algorithm, but I'll still need this for moving between nodes.

  Read the article

• ubuntu mass deployment kickstart file how/where?

  - by gkrawiec

  i've succesfully been able to prepare an OEM image that is ready to be cloned and installed in about 1100 machines. My only issue right now is that when the machine boots for the first time it asks for the basic setup questions. I think I have the kickstart file ready, but I dont know how to call it. My logic says that before I run the "prepare to ship to end user" script that I have to modify the boot parameters to call the ks file so the ks.cfg file goes with each drive. My issue is I cant figure out how to modify the boot parameters. Also, i dont know if there is a log i can check to see if its actually calling it or not. I am using ubuntu 12.04 desktop x64. I am trying on /etc/default/grub by modifying one line from GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash ks=file:/ks.cfg" then I run an update-grub but its not working. My ks.cfg file is: ----------------------- #Generated by Kickstart Configurator #System language lang en_US #System keyboard keyboard us #System timezone timezone America/Tijuana Initial user user mytestuser --fullname "Test User" --iscrypted --password $sdfsfsdgthrttyujtkyktru #Rebootafter installation reboot ------------------------- what am I doing wrong? thanks, -gk

  Read the article

• High Power Consumption and Wakeups on my Asus X54H with 12.04

  - by Marogian

  So I've been using powertop to try and reduce the power consumption on my laptop as I only seem to get about 3 hours of battery. From reading other threads on here it seems my power consumption and wakeups are strangely high, here's a summary: The battery reports a discharge rate of 10.2 W Summary: 651.8 wakeups/second, 0.0 GPU ops/second and 0.0 VFS ops/sec The things which stand out as odd: 1.31 W 4.0 ms/s 166.7 Interrupt PS/2 Touchpad / Keyboard / Mouse So more than 10% of my battery is being consumed by my touchpad/keyboard? That doesn't seem right. 548 mW 34.3 ms/s 45.9 Process compiz 5% from Compiz. Is this correct? 376 mW 1.8 ms/s 47.5 Interrupt [51] i915 298 mW 1.4 ms/s 37.7 Timer tick_sched_timer Another few percent from these things- not quite sure what they are. For reference I've installed Laptop Mode Tools, Jupiter (on power save), the CPU governor is definitely on powersave and brightness is on minimum. What else can I do/Any ideas? I've seen other posts on here reporting laptop battery lives of ~8 hours and power consumption of 4W rather than my 10W... Thanks!

  Read the article

• How do I mount my Android phone?

  - by Amanda

  I'm puzzled because my phone used to just appear when I plugged it in. It doesn't anymore and The development options are definitely set to allow USB debugging. The phone is charging via USB but doesn't appear in lsusb [0 amanda@luna android-sdk-linux_86]$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 17ef:4807 Lenovo UVC Camera Bus 003 Device 012: ID 413c:1003 Dell Computer Corp. Keyboard Hub Bus 003 Device 003: ID 08ff:2810 AuthenTec, Inc. AES2810 Bus 003 Device 013: ID 413c:2010 Dell Computer Corp. Keyboard Bus 003 Device 014: ID 046d:c001 Logitech, Inc. N48/M-BB48 [FirstMouse Plus] adb devices -l shows nothing. In my Wireless and Network settings I changed the USB connection settings to "Mass storage" -- they were set to "Ask on connection" though I definitely wasn't getting asked. I don't get any Click here to connect via USB alert either. I'm not even sure whether the issue is my phone or my computer. It seems odd that it isn't even appearing in lsusb Not for nothing, the thumb drive on my keyring also does not appear in lsusb -- I've tried both in a bunch of different ports. I kind of assume the thumb drive is just borked, but it could be my OS.

  Read the article

• How to Print From Metro Apps in Windows 8

  - by Taylor Gibb

  Printing has become an application aware feature in Metro applications. This makes the outcome of a print job different from application to application, but the question remains, how do you print? Using the Keyboard Not all apps support printing in Windows 8, a good example of one that does is Mail. So fire up the default Mail app select an email you want to print. When you are ready, go ahead and press the ctrl + P keyboard combination. This will bring up a list of available print devices on the right-hand side, you can use the up and down arrows to select a printer. You will get most of the options you are use to when printing, so once you have set up your preferences go ahead and hit the print button. Using the Mouse If you would rather use your mouse, move it to the bottom right hand corner of your screen, which will bring up the Charms bar, from here you will need to click on the devices charm. Using this will list your printers as well as other devices, so make sure you select a printer. That’s all there is to it. How To Switch Webmail Providers Without Losing All Your Email How To Force Windows Applications to Use a Specific CPU HTG Explains: Is UPnP a Security Risk?

  Read the article

• A terminal emulator for ex-Windows users

  - by Dan

  There are several things I would like to be better in Ubuntu Terminal Emulator. coloring, like in the source code Copy and paste keyboard shortcuts that I used all the time in Windows: Ctrl-C and Ctrl-V (Most of people here in Ubuntu use Ctrl+C and Ctrl+V keyboard shortcuts to copy and paste everywhere except the terminal! I think it's annoying for newcomers, and I don't worry about historical reasons) A feature to save all the output to log file UPDATE: Can the terminal be a powerful feature-full user-friendly tool like a modern IDE? The Linux user can spend 30% of time in the terminal. Programmers no longer code in a notepad. Can I see the history pane? Suggestions? Directory pane? Commands list? Search for words in an output? Contextual behavior? "Search in Google" for a mouse right-click. Tips and tricks learning? Time is money! Please, people, give me a link to the 21st - century terminal.

  Read the article

• Ubuntu 13.04 under Parallels Desktop - Black Desktop after X Windows Update

  - by Bob Reckhow

  I have been running Ubuntu 13.04 successfully on a MacBook Pro in a virtual machine in Parallels Desktop 9. Today (2013-10-17) after applying today's Ubuntu update, which included updates to X Windows, my Ubuntu 13.04 virtual machine launches, the launcher comes up, but the screen background is solid black, rather than the shaded orange colour of the default desktop background (and my desktop icons are "hidden behind this blackness", as well). I can launch applications from the launcher, and there is a very brief white flash on the screen, and then it returns to black. It's as if there is a "black blanket" covering the entire screen, so there is no way to interact with any application windows using the keyboard or mouse. The icons of the launcher are responsive to the mouse, so I can right-click and quit any application I have launched. But the rest of the screen is non-responsive to keyboard or mouse. This same behaviour happens with two different versions of Parallels Tools, so I am quite sure this is not a Parallels problem per se, although I could believe that it could be a paroblem with the interface between Parallels and this new updated X Windows code. Could anyone tell me what has happened, and how I might be able to fix this problem, so I can continue to use my Ubuntu 13.04 virtual machine? (I do have the option of reverting to a previous version of my virtual machine from before this update, but if possible I would prefer to keep my version of Ubuntu 13.04 up to date with the latest updates.) Thanks, Bob

  Read the article

• How does one find out which application is associated with an indicator icon in Ubuntu 12.04?

  - by Amos Annoy

  It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? (the examination of SM points out a rather poignant factor in the faster depletion and shortened run time on battery - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously it was well under 10% in 10.04, between 5% and 7%!) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators

  Read the article

• Synaptics touchpad problem when disabling it and then enabling it

  - by CYREX

  My girlfriend has an HP dv6000. In ubuntu 10.10 32bit i use the synaptic on it and all is good but when i disable it and enable it the problem starts. when i press the disable button in the synaptics touchpad it disables the mouse AND the keyboard. After enabled the Keyboard keys and Mouse clicks do not work. If i click on the panel below, for example the Applications, Places or System buttons the focus gets stuck there forever. I can open nautilus by clicking on it but i can not use the menus, the ALT+F2 function, see the wireless connections, lower the sound through the panel, etc.. Here comes the weird part. If i press CTRL+ALT+F1 (or any other tty for that matter) and then come back to CTRL+ALT+F7 where the gui is everything works perfect again. This started about a week ago but she told me right now. i checked dmesg which is for sometime now throwing some warnings about Skipping EDID probe do to cached edid but for what i could find out this did not create the problem in the start. NOTE: I do not need to login when i do CTRL+ALT+F1 i just need to change to another tty then come back to F7. What could be causing this problem?

  Read the article

• How to Pin Any File to the Start Screen in Windows 8

  - by Taylor Gibb

  By default Windows 8 only allows you to pin a few file types to the Start Screen. Read on to find out how you can change that by editing the registry. How to Pin Any File to the Start Screen in Windows 8 Press the Win + R keyboard combination to open a run box, then type notepad and press enter. When notepad opens, paste the following into the new document: Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\*\shell\pintostartscreen] “MUIVerb”=”@shell32.dll,-51201″ “NeverDefault”=”" “Description”=”@shell32.dll,-51202″ “MultiSelectModel”=”Single” [HKEY_CLASSES_ROOT\*\shell\pintostartscreen\command] “DelegateExecute”=”{470C0EBD-5D73-4d58-9CED-E91E22E23282}” Then click on the File menu item and select save as… Before you go any further, change the Save as type to All Files. Then give your file a name ending in .reg and click Save. PinToStartHack.reg To use the hack, just double click on the .reg file you just created. When you are prompted about whether you want to continue, click Yes. Now you can pin any file to the Start Screen. Undo the Change If you ever wish to undo the change, press the Win + R keyboard combination and type regedit, then press enter. Then drill down into: HKEY_CLASSES_ROOT\*\shell\ Finally delete the pintostartscreen key. That’s all there is to it. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

  Read the article

• Build vs Rebuild

  - by prash

  Build means compile and link only the source files that have changed since the last build, while Rebuild means compile and link all source files regardless of whether they changed or not. Build is the normal thing to do and is faster. Sometimes the versions of project target components can get out of sync and rebuild is necessary to make the build successful. In practice, you never need to Clean. Build or Rebuild Solution builds or rebuilds all projects in the your solution, while Build or Rebuild <project name> builds or rebuilds the StartUp project. To set the StartUp project, right click on the desired project name in the Solution Explorer tab and select Set as StartUp project. The project name now appears in bold. Compile just compiles the source file currently being edited. Useful to quickly check for errors when the rest of your source files are in an incomplete state that would prevent a successful build of the entire project. Ctrl-F7 is the shortcut key for Compile. All source files that have changed are saved when you request a build/rebuild, so you don't have to save them first. When you run your executable (F5 or Ctrl-F5), Visual Studio saves all your changed source files and builds anything that changed, so you don't need to explicitly do those steps every time. This allows for quick "trial and error" debugging. Incidentally, if you like those little Visual Studio keyboard shortcuts, you can download posters of the C# and the VB.Net ones, respectively (I am personally a big fan of using keyboard shortcuts :) ).   Visual Studio 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=92ced922-d505-457a-8c9c-84036160639f   Visual Studio 2005 C#: http://www.microsoft.com/downloads/details.aspx?FamilyID=c15d210d-a926-46a8-a586-31f8a2e576fe&DisplayLang=en VB.NET: http://www.microsoft.com/downloads/details.aspx?FamilyID=6bb41456-9378-4746-b502-b4c5f7182203&DisplayLang=en

  Read the article

• My Obligatory IPad Post

  - by mark.wilcox

  I've had my IPad for about a week now. So I thought I'd write some thoughts down based on my initial experiences. Here are my initial take-aways: 1 - Netflix OnDemand - I'm a movie junkie. I'm now more apt to just start a movie as background sound for my workday (I telecommute - so except for the occasional bark from my dog, it's awfully quiet here if I don't have something going). 2 - The Email Client is really nice and I'm as fast or faster typing when I have the wireless keyboard engaged. Even with onscreen keyboard - I'm already close to 75% of desktop speed 3 - The battery life is incredible - I think this is the first case where a mobile device actually under-promised on battery 4 - It totally has killed the notion of using a normal PC for my wife and mother-in-law - neither of which had wanted an iPhone/iPod Touch or really any Apple device until they got to play with my iPad. The concept of - instant on, easy to hold and touch-based navigation has them hooked. Heck, it has me hooked. My ultimate goal is to be able to have it at least replace the need to take my netbook with me on the road. I haven't had a chance to complete my testing on that front yet - between work, my wife traveling (for a change) and now my wife home sick - I haven't had time to just play with it. But so far my only regret - that I haven't already bought two more for everyone else in my family who wants to use mine. Posted via email from Virtual Identity Dialogue

  Read the article

• How should I structure moving from overworld to menu system / combat?

  - by persepolis

  I'm making a text-based "Arena" game where the player is the owner of 5 creatures that battle other teams for loot, experience and glory. The game is very simple, using Python and a curses emulator. I have a static ASCII map of an "overworld" of sorts. My character, represented by a glyph, can move about this static map. There are locations all over the map that the character can visit, that break down into two types: 1) Towns, which are a series of menus that will allow the player to buy equipment for his team, hire new recruits or do other things. 2) Arenas, where the player's team will have a "battle" interface with actions he can perform, messages about the fight, etc. Maybe later, an ASCII representation of the fight but for now, just screens of information with action prompts. My main problem is what kind of design or structure I should use to implement this? Right now, the game goes through a master loop which waits for keyboard input and then moves the player about the screen. My current thinking is this: 1) Upon keyboard input, the Player coordinates are checked against a list of Location objects and if the Player coords match the Location coords then... 2) ??? I'm not sure if I should then call a seperate function to initiate a "menu" or "combat" mode. Or should I create some kind of new GameMode object that contains a method itself for drawing the screen, printing the necessary info? How do I pass my player's team data into this object? My main concern is passing around the program flow into all these objects. Should I be calling straight functions for different parts of my game, and objects to represent "things" within my game? I was reading about the MVC pattern and how this kind of problem might benefit - decouple the GUI from the game logic and user input but I have no idea how this applies to my game.

  Read the article

• Unity elements sometimes appear while full screen in Virtualbox - how to stop it?

  - by frumbert

  Launcher is great, and it helps me finds stuff. I have the latest release of 12. But when I'm full screen in VirtualBox running another operating system and I hit some key combination I haven't yet figured out, Unity suddenly grabs keyboard focus. It might be alt-tab, it might be left-control x. I have physically pulled both the windows key and FN key off my laptop because they get in the way, so it's probably not the windows key. You don't know the focus has been stolen because the full screen app (VirtualBox) is still full screen and the Unity element is in the background. But you're busy typing into a Unity box, not your foreground application. This is particularly annoying. In my screenshot (taken from a camera, because the built in screen capture program can't capture a screenshot containing the launcher...) the windows VM is the foreground application, but the "Run Command" entry box has come up and is capturing the keyboard: I would like a foreground full screen app to stay that way. Is there a way that I can keep Unity but only have it activate its elements (e.g. pop out with its search box) if I physically click a button, not type some random key combination that foreground applications can get confused about? Otherwise I can do without the launcher or other elements, because doing my actual work is more involved than just launching programs.

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >