Search Results

Search found 14641 results on 586 pages for 'postal address'.

Page 104/586 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

  • Can not connect remotely to MySQL Server on Ubuntu 10.10

    - by BobFranz
    Ok I have searched google for two days trying to get this to work. Here are the steps I have taken so far: Clean install of Ubuntu 10.10 Install mysql 5.1 as well as admin Comment out the bind address in the config file Create a new database Create a new user that is username@% to allow remote connections Grant all access to this user to the new database EXCEPT the grant option Login on the server is ok using this new user and database on the localhost Login on the server is ok using this new user and database on the server internal network ip Login from a remote computer is ok using this new user and database using the internal network ip Login is not working when logging in with this username and database using the external ip address from the server or the remote computer. I have port forwarding enabled for this port and it is viewable from outside as confirmed by canyouseeme.org I have nmap'd using the following command on the internal ip and get the below result: nmap -PN -p 3306 192.168.1.73 Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:41 PST Nmap scan report for computername-System-Name (192.168.1.73) Host is up (0.00064s latency). PORT STATE SERVICE 3306/tcp open mysql Nmap done: 1 IP address (1 host up) scanned in 0.23 seconds I have nmap'd using the following command on the internal ip and get the below result(I have hidden ip for obvious reasons): nmap -PN -p 3306 xxx.xxx.xx.xxx Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:42 PST Nmap scan report for HOSTNAME (xxx.xxx.xx.xxx) Host is up (0.00056s latency). PORT STATE SERVICE 3306/tcp closed mysql Nmap done: 1 IP address (1 host up) scanned in 0.21 seconds I am completely stuck here and need some help. I have tried everything under the moon and still can not connect from a remote external ip address. Any help is greatly appreciated and I need to do anything to help find the problem let me know and I will post the results here.

    Read the article

  • IPSec VPN IP addresses

    - by Randomblue
    I have an IPSec VPN on my Windows 7 machine (all using the native Windows 7 gateway). The host I am connecting to has different ISAKMP "Phase 1" and "Phase 2" IP addresses. As I understand, the Phase 1 address is that of the IPsec endpoint, to which I can connect just fine. The Phase 2 address is found in their "crypto map", and the addresses need to match. At the moment, both my Phase 1 and Phase 2 addresses are configured the same. On my side, I get the error "Error 791: The L2TP connection attempt failed because security policy for the connection was not found" How can I configure the Phase 2 IP address for my Windows 7 IPSec VPN to be different to the IPSec endpoint address?

    Read the article

  • What other ways can I load balance EC2 servers without using Elastic Load Balancing?

    - by undefined
    I have a web application that consists of a web server managed by a web hosting firm, a set of EC2 instances in amazons cloud and a MySQL database (hosted on the webserver). MySQL is behind a firewall and is set to allow access from Localhost and from a single IP address which is an Amazon Elastic IP address that is attached to the EC2 instance I have been running up to now. The problem is that I want to look at my scaling up and load balancing strategy for my EC2 instance. To this end I have been investigating the Elastic Load Balancers and Autoscaling tools that Amazon provides and have managed to set this up fine but for one thing - connecting to the MySQL database running on my webserver. I realised (thanks to answers on Serverfault) that I needed to check firewall settings and add the IP address for the load balancer, however Elastic Load Balancers provide you with a DNS name, not an IP address and infact the IP addresses change over time so this will not work. I have been told by the company hosting the database that the way the firewall works is to look up the IP address of the DNS name and store the IP rather than the DNS name. so basically this will not work and the only way to allow access would be to open up the SQL port to allow access from anyone! Is this a viable idea? Should I look at moving my database into the cloud? Is there another firewall that the server company can use? Should I find another way of load balancing (if so what?) tricky one eh? any help appreciated!

    Read the article

  • Problems with connecting to wireless network on windows 7

    - by Naveen
    I have a Dell laptop with Windows 7 (Home premium) 64 bit edition installed on it. I use a Wi-Fi router to browse the net. My problem is, I lose the network connection every 10 minutes or so. The network icon on the system tray shows the refresh icon and the status as "identifying network". The network is fine and works fine with my phone. I saw on the net this may be caused if I have enabled IPv6, so I disabled it but still problem persists. When I look at the event log I see the following entries: "Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xXXXXXXXX. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server." I have also installed VirtualBox(32 bit edition) on the laptop. Does anybody any solution to this?

    Read the article

  • is VPN client working one way ?

    - by user56839
    I have centos server and installed the VPN client(cisco-vpnclient) and able to connect to the server on the other side using private address and the server on the other side pingable using the private address . The question But the other side can not connect to my server using private address such as: when the other side try to ping my server using the private ip do not get any response. is VPN client working one way ( just send the data to VPN server and do not receive the data) ?

    Read the article

  • Can't connect my server outside my wireless network. server is openERP running on ubuntu 12.04 desktop router is ciso small business router

    - by user2613541
    I've looked on the internet regarding port forwarding. I've successfully fowarded port 8069 to my server's ip address. I can access openERP when I'm connected to the network of my office but not when I'm outside my office's network. What am I missing? my computer's ip address starts with 192... Do I have to first up the router's ip address and then my server's ip address to get to my server from the outside? what should I type in my internet browser? I've looked all day yesterday.

    Read the article

  • How can I move authorized applications between google accounts?

    - by zoopp
    I'm looking into creating an email address with a professional name on gmail and due to the fact that I can't change my current one I have to create new google account. Among some things which which need to be patched (eg. forwarding email to the new address until every other account's email contact address is changed etc.) I came across authorized applications. If I am to use exclusively the new email address I have to somehow move my authorized applications as well since if I am to eventually delete my old account I will lose access to my current profiles created by those applications (eg. the stackexchange network, youtube etc). How can this move be accomplished?

    Read the article

  • SQL RDBMS : one query or multiple calls

    - by None None
    After looking around the internet, I decided to create DAOs that returned objects (POJOs) to the calling business logic function/method. For example: a Customer object with a Address reference would be split in the RDBMS into two tables; Customer and ADDRESS. The CustomerDAO would be in charge of joining the data from the two tables and create both an Address POJO and Customer POJO adding the address to the customer object. Finally return the fulll Customer POJO. Simple, however, now i am at a point where i need to join three or four tables and each representing an attribute or list of attributes for the resulting POJO. The sql will include a group by but i will still result with multiple rows for the same pojo, because some of the tables are joining a one to many relationship. My app code will now have to loop through all the rows trying to figure out if the rows are the same with different attributes or if the record should be a new POJO. Should I continue to create my daos using this technique or break up my Pojo creation into multiple db calls to make the code easier to understand and maintain?

    Read the article

  • HP ProLiant DL380 G3 Running Windows Server 2000 has crashed between 6-7:30am for the past 5 days

    - by user109717
    I have a HP ProLiant DL380 G3 running Windows Server 2000 that has been crashing everyday between 6-730am. This started when I changed out a failing hard drive 6 days ago. I have looked at the scheduled tasks which does not have anything pertaining to this issue. Below are the only things I see in the system log and some of the dump files. Can this be a hardware issue if this happens at a certain time frame everyday? Any help is greatly appreciated. Thanks The previous system shutdown at 6:07:55 AM on 2/7/2012 was unexpected. System Information Agent: Health: The server is operational again. The server has previously been shutdown by the Automatic Server Recovery (ASR) feature and has just become operational again. [SNMP TRAP: 6025 in CPQHLTH.MIB] BugCheck 7A, {3, c0000005, 3400028, 0} Probably caused by : memory_corruption ( nt!MiMakeSystemAddressValidPfn+42 ) Followup: MachineOwner 0: kd !analyze -v * Bugcheck Analysis * * KERNEL_DATA_INPAGE_ERROR (7a) The requested page of kernel data could not be read in. Typically caused by a bad block in the paging file or disk controller error. Also see KERNEL_STACK_INPAGE_ERROR. If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185, it means the disk subsystem has experienced a failure. If the error status is 0xC000009A, then it means the request failed because a filesystem failed to make forward progress. Arguments: Arg1: 00000003, lock type that was held (value 1,2,3, or PTE address) Arg2: c0000005, error status (normally i/o status code) Arg3: 03400028, current process (virtual address for lock type 3, or PTE) Arg4: 00000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address) MODULE_NAME: nt IMAGE_NAME: memory_corruption BugCheck A, {0, 2, 1, 804137d6} Probably caused by : ntkrnlmp.exe ( nt!CcGetVirtualAddress+ba ) * Bugcheck Analysis * * IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high. This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 00000000, memory referenced Arg2: 00000002, IRQL Arg3: 00000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 804137d6, address which referenced memory MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe

    Read the article

  • Cannot Access Server from External IP (Router)

    - by mindoftea
    We have an Ubuntu 10.04 LAMP server running on site (Apache is on port 80). It is running fine through the LAN, but I cannot access it using its external IP address through the Netopia 3000 Series modem by which it is connected to the internet. I have tried using what Netopia calls "Pinholes" (Port Forwarding) to make the server accessible, but a telnet to the external address just gives me "connect to address x.x.x.x: Operation timed out." I have also tried enabling "Services" and "IP Passthrough" on the router, but it gives the same result as above. How can I enable the server to be accessed through its external IP address? Because it connects fine locally, it would seem to be a problem with the Netopia router. Update: Booting the server in GUI mode instead of text mode solved the problem instantly. Any ideas why?

    Read the article

  • How does communication between 2 computers in a single network happen?

    - by learner
    Lets say I and my friend connect our computers with a LAN cable. I ping my friend with his IP address. How does it work? Since we are in the same network, we don't even need IP addresses, do we? Isn't IP addressing only relevant in case of inter-network communication? What will the ping command do with his IP address? How will it eventually find his physical address (NIC address)? (no ARP here, because that would involve a router at the edge of the network, which doesn't apply here). Am I wrong somewhere?

    Read the article

  • Perl IO modules possibly causing issues in Net::DNS module

    - by Rich
    Hi! I’m porting some software that I wrote for a White Russian OpenWRT system to a new Kamikaze 8.09.1 OpenWRT system but I am having some serious issues that I’m hoping you can help me with. Old system Linux kernel 2.4.34 MIPSEL arch Perl 5.8.7 Net::DNS 0.48 IO 1.21 IO::Socket 1.28 IO::Socket::INET 1.28 New system Linux kernel 2.6.26.8 MIPS arch Perl 5.10.0 Net::DNS 0.66 IO 1.23_01 IO::Socket 1.30_01 IO::Socket::INET 1.31 First, let me provide some background information… I am trying to resolve my server (clearprobe.winbeam.com) from within my Perl program and see the following if I enable debugging in Net::DNS: resolve: Server 'clearprobe-ddns.winbeam.com' ;; query(clearprobe-ddns.winbeam.com) ;; setting up an AF_INET() family type UDP socket ;; send_udp(192.168.88.1:53) ;; send_udp(4.2.2.2:53) ;; send_udp(192.168.88.1:53) ;; send_udp(4.2.2.2:53) resolve: res->errorstring: query timed out Both of these servers resolve clearprobe.winbeam.com fine from the command line: root@cwb-2-11:~# echo “nameserver 192.168.88.1” > /etc/resolv.conf root@cwb-2-11:~# nslookup clearprobe-ddns.winbeam.com Server: 192.168.88.1 Address 1: 192.168.88.1 router Name: clearprobe-ddns.winbeam.com Address 1: 64.13.48.40 64-13-48-40.war.clearwire-dns.net root@cwb-2-11:~# echo “nameserver 4.2.2.2” > /etc/resolv.conf root@cwb-2-11:~# nslookup clearprobe-ddns.winbeam.com Server: 4.2.2.2 Address 1: 4.2.2.2 vnsc-bak.sys.gtei.net Name: clearprobe-ddns.winbeam.com Address 1: 64.13.48.40 64-13-48-40.war.clearwire-dns.net Using Perl’s call to the C gethostbyaddr() function works fine, but I need to do another lookup later in the software which requires that I specify the nameserver (clearprobe-ddns.winbeam.com is the authority for my internal DNS zone), hence my Net::DNS requirement. Now, here is the IO module-specific information: What I am seeing is that the reply is coming back from the nameserver (confirmed via tcpdump – I can send the captures if you’d like), but the UDP packets are sitting in the process’s UDP receive queue pending reception by Net::DNS (the approx 1752 bytes per response stay queued waiting for $sel-can_read()): root@cwb-2-11:~# netstat -una Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State udp 1752 0 0.0.0.0:52680 0.0.0.0:* root@cwb-2-11:~# netstat -una Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State udp 5256 0 0.0.0.0:52680 0.0.0.0:* If I force $sock[AF_INET]-recv($buf, $self-_packetsz) around line 803 of /usr/lib/perl5/5.10/Net/DNS/Resolver/Base.pm, instead of waiting for IO::Select’s can_read() function ( @ready = $sel-can_read($timeout)) to populate @ready, the response is received and processed. Any idea what could be causing this issue? In a possibly related matter, I noticed in another script that the following code fails in the same manner (network responses stay in the process’s TCP receive queue) with the new system: $sock = new IO::Socket::INET( PeerAddr => "$server", PeerPort => 37, Proto => 'tcp', Timeout => 5 ); Whereas the following code works: $sock = new IO::Socket::INET( PeerAddr => "$server", PeerPort => 37, Proto => 'tcp' ); I have looked through the NET::DNS code and don’t see a timeout passed for the UDP sockets, so I am not sure if that this is related or not. Please let me know if I can provide you with any further information in order to help diagnose this issue. Thanks! -Rich

    Read the article

  • WCF Service error received when using TCP: "The message could not be dispatched..."

    - by StM
    I am new to creating WCF services. I have created a WCF web service in VS2008 that is running on IIS 7. When I use http the service works perfectly. When I configure the service for TCP and run I get the following error message. There was a communication problem. The message could not be dispatched because the service at the endpoint address 'net:tcp://elec:9090/CoordinateIdTool_Tcp/IdToolService.svc is unavailable for the protocol of the address. I have searched a lot of forums, including this one, for a resolution but nothing has worked. Everything appears to be set up correctly on IIS 7. WAS has been set up to run. The default web site has a net.tcp binding and the application has net.tcp under the enabled protocols. I am including what I think is the important part of the web.config from the host project and also the app.config from the client project I am using to test the service. Hopefully someone can spot my error. Thanks in advance for any help or recommendations that anyone can provide. Web.Config <bindings> <wsHttpBinding> <binding name="wsHttpBindingNoMsgs"> <security mode="None" /> </binding> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="CogIDServiceHost.ServiceBehavior" name="CogIDServiceLibrary.CogIdService"> <endpoint address="" binding="wsHttpBinding" bindingConfiguration="wsHttpBindingNoMsgs" contract="CogIDServiceLibrary.CogIdTool"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" /> <endpoint name="CoordinateIdService_TCP" address="net.tcp://elec:9090/CoordinateIdTool_Tcp/IdToolService.svc" binding="netTcpBinding" bindingConfiguration="" contract="CogIDServiceLibrary.CogIdTool"> <identity> <dns value="localhost" /> </identity> </endpoint> </service> </services> <behaviors> <serviceBehaviors> <behavior name="CogIDServiceHost.ServiceBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> App.Config <system.serviceModel> <diagnostics performanceCounters="Off"> <messageLogging logEntireMessage="true" logMalformedMessages="false" logMessagesAtServiceLevel="false" logMessagesAtTransportLevel="false" /> </diagnostics> <behaviors /> <bindings> <wsHttpBinding> <binding name="WSHttpBinding_CogIdTool" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true" allowCookies="false"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="None"> <transport clientCredentialType="Windows" proxyCredentialType="None" realm="" /> <message clientCredentialType="Windows" negotiateServiceCredential="true" establishSecurityContext="true" /> </security> </binding> <binding name="wsHttpBindingNoMsg"> <security mode="None"> <transport clientCredentialType="Windows" /> <message clientCredentialType="Windows" /> </security> </binding> </wsHttpBinding> </bindings> <client> <endpoint address="http://sdet/CogId_WCF/IdToolService.svc" binding="wsHttpBinding" bindingConfiguration="wsHttpBindingNoMsg" contract="CogIdServiceReference.CogIdTool" name="IISHostWsHttpBinding"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="http://localhost:1890/IdToolService.svc" binding="wsHttpBinding" bindingConfiguration="WSHttpBinding_CogIdTool" contract="CogIdServiceReference.CogIdTool" name="WSHttpBinding_CogIdTool"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="http://elec/CoordinateIdTool/IdToolService.svc" binding="wsHttpBinding" bindingConfiguration="wsHttpBindingNoMsg" contract="CogIdServiceReference.CogIdTool" name="IIS7HostWsHttpBinding_Elec"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="net.tcp://elec:9090/CoordinateIdTool_Tcp/IdToolService.svc" binding="netTcpBinding" bindingConfiguration="" contract="CogIdServiceReference.CogIdTool" name="IIS7HostTcpBinding_Elec" > <identity> <dns value="localhost"/> </identity> </endpoint> </client> </system.serviceModel>

    Read the article

  • Help Writing Input Data to Database With Wordpress Plugin

    - by HollerTrain
    Hi I am making a wordpress plugin where I need the Admin to enter data into a database table. I am able to install the db table when the Plugin is activated, however I can't figure out how to save the user input. I've asked on the WP forums but they're dead... Any experienced guru who can lend some guidance would be greatly appreciated. <?php /******************************************************************* * INSTALL DB TABLE - ONLY AT RUN TIME * *******************************************************************/ function ed_xml_install() { global $wpdb; $ed_xml_data = $wpdb->prefix . "ed_xml_data"; if($wpdb->get_var("SHOW TABLES LIKE '$ed_xml_data'") != $ed_xml_data) { $sql = "CREATE TABLE " . ed_xml_data . " ( id mediumint(9) NOT NULL AUTO_INCREMENT, name tinytext NOT NULL, address text NOT NULL, url VARCHAR(55) NOT NULL, phone bigint(11) DEFAULT '0' NOT NULL, UNIQUE KEY id (id) );"; require_once(ABSPATH . 'wp-admin/includes/upgrade.php'); dbDelta($sql); $name = "Example Business Name"; $address = "1234 Example Street"; $url = "http://www.google.com"; $phone = "523-3232-323232"; $insert = "INSERT INTO " . ed_xml_data . " (phone, name, address, url) " . "VALUES ('" . phone() . "','" . $wpdb->escape($name) . "','" . $wpdb->escape($address) . "', '" . $wpdb->escape($url) . "')"; $results = $wpdb->query( $insert ); } } //call the install hook register_activation_hook(__FILE__,'ed_xml_install'); /******************************************************************* * CREATE MENU, CREATE MENU CONTENT * *******************************************************************/ if ( is_admin() ){ /* place it under the ED menu */ //TODO $allowed_group = ''; /* Call the html code */ add_action('admin_menu', 'ed_xmlcreator_admin_menu'); function ed_xmlcreator_admin_menu() { add_options_page('ED XML Creator', 'ED XML Creator', 'administrator', 'ed_xml_creator', 'ed_xmlcreator_html_page'); } } /******************************************************************* * CONTENT OF MENU CONTENT * *******************************************************************/ function ed_xmlcreator_html_page() { <div> <h2>Editors Deal XML Options</h2> <p>Fill in the below information which will get passed to the .XML file.</p> <p>[<a href="" title="view XML file">view XML file</a>]</p> <form method="post" action="options.php"> <?php wp_nonce_field('update-options'); ?> <table width="510"> <!-- title --> <tr valign="top"> <th width="92" scope="row">Deal URL</th> <td width="406"> <input name="url" type="text" id="url" value="<?php echo get_option('url'); ?>" /> </td> </tr> <!-- description --> <tr valign="top"> <th width="92" scope="row">Deal Address</th> <td width="406"> <input name="address" type="text" id="address" value="<?php echo get_option('address'); ?>" /> </td> </tr> <!-- business name --> <tr valign="top"> <th width="92" scope="row">Business Phone</th> <td width="406"> <input name="phone" type="text" id="phone" value="<?php echo get_option('phone'); ?>" /> </td> </tr> <!-- address --> <tr valign="top"> <th width="92" scope="row">Business Name</th> <td width="406"> <input name="name" type="text" id="name" value="<?php echo get_option('name'); ?>" /> </td> </tr> </table> <input type="hidden" name="action" value="update" /> <input type="hidden" name="page_options" value="hello_world_data" /> <p> <input type="submit" value="<?php _e('Save Changes') ?>" /> </p> </form> </div> ?>

    Read the article

  • JQuery tab Selection problem?

    - by PeAk
    New to JQuery and I was wondering how do I keep any tabbed selected when a user reloads the web page? What part of my code do I need to change? Here is my JQuery code. $(document).ready(function() { //When page loads... $(".form-content").hide(); //Hide all content var firstMenu = $("#home-menu ul li:first"); firstMenu.show(); firstMenu.find("a").addClass("selected-link"); //Activate first tab $(".form-content:first").show(); //Show first tab content //On Click Event $("#home-menu ul li").click(function() { $("#home-menu ul li a").removeClass("selected-link"); //Remove any "selected-link" class $(this).find("a").addClass("selected-link"); //Add "selected-link" class to selected tab $(".form-content").hide(); //Hide all tab content var activeTab = $(this).find("a").attr("href"); //Find the href attribute value to identify the selected-link tab + content $(activeTab).fadeIn(); //Fade in the selected-link ID content return false; }); }); Here is the XHTML code. <div id="home-menu"> <ul> <li><a href="#personal-info-form" title="Personal Info Form Link">Personal Info</a></li> <li><a href="#contact-info-form" title="Contact Info Form Link">Contact Info</a></li> </ul> </div> <div> <div id="personal-info-form" class="form-content"> <h2>Personal Information</h2> <form method="post" action="index.php"> <fieldset> <ul> <li><label for="first_name">First Name: </label><input type="text" name="first_name" id="first_name" size="25" class="input-size" value="<?php if(!empty($first_name)){ echo $first_name; } ?>" /></li> <li><label for="middle_name">Middle Name: </label><input type="text" name="middle_name" id="middle_name" size="25" class="input-size" value="<?php if(!empty($middle_name)){ echo $middle_name; } ?>" /></li> <li><label for="last_name">Last Name: </label><input type="text" name="last_name" id="last_name" size="25" class="input-size" value="<?php if(!empty($last_name)){ echo $last_name; } ?>" /></li> <li><label for="password-1">Password: </label><input type="password" name="password1" id="password-1" size="25" class="input-size" /></li> <li><label for="password-2">Confirm Password: </label><input type="password" name="password2" id="password-2" size="25" class="input-size" /></li> <li><input type="submit" name="submit" value="Save Changes" class="save-button" /> <input type="submit" name="submit" value="Preview Changes" class="preview-changes-button" /></li> </ul> </fieldset> </form> </div> <div id="contact-info-form" class="form-content"> <h2>Contact Information</h2> <form method="post" action="index.php" id="contact-form"> <fieldset> <ul> <li><label for="address">Address 1: </label><input type="text" name="address" id="address" size="25" class="input-size" value="<?php if (isset($_POST['address'])) { echo $_POST['address']; } else if(!empty($address)) { echo $address; } ?>" /></li> <li><label for="address_two">Address 2: </label><input type="text" name="address_two" id="address_two" size="25" class="input-size" value="<?php if (isset($_POST['address_two'])) { echo $_POST['address_two']; } else if(!empty($address_two)) { echo $address_two; } ?>" /></li> <li><label for="city_town">City/Town: </label><input type="text" name="city_town" id="city_town" size="25" class="input-size" value="<?php if (isset($_POST['city_town'])) { echo $_POST['city_town']; } else if(!empty($city_town)) { echo $city_town; } ?>" /></li> <li><input type="submit" name="submit" value="Save Changes" class="save-button" /> <input type="hidden" name="contact_info_submitted" value="true" /> <input type="submit" name="submit" value="Preview Changes" class="preview-changes-button" /></li> </ul> </fieldset> </form> </div> </div>

    Read the article

  • Working with Silverlight DataGrid RowDetailsTemplate

    - by mohanbrij
    In this post I am going to show how we can use the Silverlight DataGrid RowDetails Template, Before I start I assume that you know basics of Silverlight and also know how you create a Silverlight Projects. I have started with the Silverlight Application, and kept all the default options before I created a Silverlight Project. After this I added a Silverlight DataGrid control to my MainForm.xaml page, using the DragDrop feature of Visual Studio IDE, this will help me to add the default namespace and references automatically. Just to give you a quick look of what exactly I am going to do, I will show you in the screen below my final target, before I start explaining rest of my codes. Before I start with the real code, first I have to do some ground work, as I am not getting the data from the DB, so I am creating a class where I will populate the dummy data. EmployeeData.cs public class EmployeeData { public string FirstName { get; set; } public string LastName { get; set; } public string Address { get; set; } public string City { get; set; } public string State { get; set; } public string Country { get; set; } public EmployeeData() { } public List<EmployeeData> GetEmployeeData() { List<EmployeeData> employees = new List<EmployeeData>(); employees.Add ( new EmployeeData { Address = "#407, PH1, Foyer Appartment", City = "Bangalore", Country = "India", FirstName = "Brij", LastName = "Mohan", State = "Karnataka" }); employees.Add ( new EmployeeData { Address = "#332, Dayal Niketan", City = "Jamshedpur", Country = "India", FirstName = "Arun", LastName = "Dayal", State = "Jharkhand" }); employees.Add ( new EmployeeData { Address = "#77, MSR Nagar", City = "Bangalore", Country = "India", FirstName = "Sunita", LastName = "Mohan", State = "Karnataka" }); return employees; } } The above class will give me some sample data, I think this will be good enough to start with the actual code. now I am giving below the XAML code from my MainForm.xaml First I will put the Silverlight DataGrid, <data:DataGrid x:Name="gridEmployee" CanUserReorderColumns="False" CanUserSortColumns="False" RowDetailsVisibilityMode="VisibleWhenSelected" HorizontalAlignment="Center" ScrollViewer.VerticalScrollBarVisibility="Auto" Height="200" AutoGenerateColumns="False" Width="350" VerticalAlignment="Center"> Here, the most important property which I am going to set is RowDetailsVisibilityMode="VisibleWhenSelected" This will display the RowDetails only when we select the desired Row. Other option we have in this is Collapsed and Visible. Which will either make the row details always Visible or Always Collapsed. but to get the real effect I have selected VisibleWhenSelected. Now I am going to put the rest of my XAML code. <data:DataGrid.Columns> <!--Begin FirstName Column--> <data:DataGridTextColumn Width="150" Header="First Name" Binding="{Binding FirstName}"/> <!--End FirstName Column--> <!--Begin LastName Column--> <data:DataGridTextColumn Width="150" Header="Last Name" Binding="{Binding LastName}"/> <!--End LastName Column--> </data:DataGrid.Columns> <data:DataGrid.RowDetailsTemplate> <!-- Begin row details section. --> <DataTemplate> <Border BorderBrush="Black" BorderThickness="1" Background="White"> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="0.2*" /> <ColumnDefinition Width="0.8*" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition /> <RowDefinition /> <RowDefinition /> <RowDefinition /> </Grid.RowDefinitions> <!-- Controls are bound to FullAddress properties. --> <TextBlock Text="Address : " Grid.Column="0" Grid.Row="0" /> <TextBlock Text="{Binding Address}" Grid.Column="1" Grid.Row="0" /> <TextBlock Text="City : " Grid.Column="0" Grid.Row="1" /> <TextBlock Text="{Binding City}" Grid.Column="1" Grid.Row="1" /> <TextBlock Text="State : " Grid.Column="0" Grid.Row="2" /> <TextBlock Text="{Binding State}" Grid.Column="1" Grid.Row="2" /> <TextBlock Text="Country : " Grid.Column="0" Grid.Row="3" /> <TextBlock Text="{Binding Country}" Grid.Column="1" Grid.Row="3" /> </Grid> </Border> </DataTemplate> <!-- End row details section. --> </data:DataGrid.RowDetailsTemplate>   In the code above, first I am declaring the simple dataGridTextColumn for FirstName and LastName, and after this I am creating the RowDetailTemplate, where we are just putting the code what we usually do to design the Grid. I mean nothing very much RowDetailTemplate Specific, most of the code which you will see inside the RowDetailsTemplate is plain and simple, where I am binding rest of the Address Column. And that,s it. Once we will bind the DataGrid, you are ready to go. In the code below from MainForm.xaml.cs, I am just binding the DataGrid public partial class MainPage : UserControl { public MainPage() { InitializeComponent(); BindControls(); } private void BindControls() { EmployeeData employees = new EmployeeData(); gridEmployee.ItemsSource = employees.GetEmployeeData(); } } Once you will run, you can see the output I have given in the screenshot above. In this example I have just shown the very basic example, now it up to your creativity and requirement, you can put some other controls like checkbox, Images, even other DataGrid, etc inside this RowDetailsTemplate column. I am attaching my sample source code with this post. I have used Silverlight 3 and Visual Studio 2008, but this is fully compatible with you Silverlight 4 and Visual Studio 2010. you may just need to Upgrade the attached Sample. You can download from here.

    Read the article

  • Linq-to-XML query to select specific sub-element based on additional criteria

    - by BrianLy
    My current LINQ query and example XML are below. What I'd like to do is select the primary email address from the email-addresses element into the User.Email property. The type element under the email-address element is set to primary when this is true. There may be more than one element under the email-addresses but only one will be marked primary. What is the simplest approach to take here? Current Linq Query (User.Email is currently empty): var users = from response in xdoc.Descendants("response") where response.Element("id") != null select new User { Id = (string)response.Element("id"), Name = (string)response.Element("full-name"), Email = (string)response.Element("email-addresses"), JobTitle = (string)response.Element("job-title"), NetworkId = (string)response.Element("network-id"), Type = (string)response.Element("type") }; Example XML: <?xml version="1.0" encoding="UTF-8"?> <response> <response> <contact> <phone-numbers/> <im> <provider></provider> <username></username> </im> <email-addresses> <email-address> <type>primary</type> <address>[email protected]</address> </email-address> </email-addresses> </contact> <job-title>Account Manager</job-title> <type>user</type> <expertise nil="true"></expertise> <summary nil="true"></summary> <kids-names nil="true"></kids-names> <location nil="true"></location> <guid nil="true"></guid> <timezone>Eastern Time (US &amp; Canada)</timezone> <network-name>Domain</network-name> <full-name>Alice</full-name> <network-id>79629</network-id> <stats> <followers>2</followers> <updates>4</updates> <following>3</following> </stats> <mugshot-url> https://assets3.yammer.com/images/no_photo_small.gif</mugshot-url> <previous-companies/> <birth-date></birth-date> <name>alice</name> <web-url>https://www.yammer.com/domain.com/users/alice</web-url> <interests nil="true"></interests> <state>active</state> <external-urls/> <url>https://www.yammer.com/api/v1/users/1089943</url> <network-domains> <network-domain>domain.com</network-domain> </network-domains> <id>1089943</id> <schools/> <hire-date nil="true"></hire-date> <significant-other nil="true"></significant-other> </response> <response> <contact> <phone-numbers/> <im> <provider></provider> <username></username> </im> <email-addresses> <email-address> <type>primary</type> <address>[email protected]</address> </email-address> </email-addresses> </contact> <job-title>Office Manager</job-title> <type>user</type> <expertise nil="true"></expertise> <summary nil="true"></summary> <kids-names nil="true"></kids-names> <location nil="true"></location> <guid nil="true"></guid> <timezone>Eastern Time (US &amp; Canada)</timezone> <network-name>Domain</network-name> <full-name>Bill</full-name> <network-id>79629</network-id> <stats> <followers>3</followers> <updates>1</updates> <following>1</following> </stats> <mugshot-url> https://assets3.yammer.com/images/no_photo_small.gif</mugshot-url> <previous-companies/> <birth-date></birth-date> <name>bill</name> <web-url>https://www.yammer.com/domain.com/users/bill</web-url> <interests nil="true"></interests> <state>active</state> <external-urls/> <url>https://www.yammer.com/api/v1/users/1089920</url> <network-domains> <network-domain>domain.com</network-domain> </network-domains> <id>1089920</id> <schools/> <hire-date nil="true"></hire-date> <significant-other nil="true"></significant-other> </response> </response>

    Read the article

  • Link List Problem,

    - by david
    OK i have a problem with a Link List program i'm trying to Do, the link List is working fine. Here is my code #include <iostream> using namespace std; struct record { string word; struct record * link; }; typedef struct record node; node * insert_Node( node * head, node * previous, string key ); node * search( node *head, string key, int *found); void displayList(node *head); node * delete_node( node *head, node * previous, string key); int main() { node * previous, * head = NULL; int found = 0; string node1Data,newNodeData, nextData,lastData; //set up first node cout <<"Depature"<<endl; cin >>node1Data; previous = search( head, node1Data, &found); cout <<"Previous" <<previous<<endl; head = insert_Node(head, previous, node1Data); cout <<"Depature inserted"<<endl; //insert node between first node and head cout <<"Destination"<<endl; cin >>newNodeData; previous = search( head, newNodeData, &found); cout <<"Previous" <<previous<<endl; head = insert_Node(head, previous, newNodeData); cout <<"Destinationinserted"<<endl; //insert node between second node and head cout <<"Cost"<<endl; cin >>newNodeData; previous = search( head, newNodeData, &found); cout <<"Previous" <<previous<<endl; head = insert_Node(head, previous, newNodeData); cout <<"Cost inserted"<<endl; cout <<"Number of Seats Required"<<endl; //place node between new node and first node cin >>nextData; previous = search( head, nextData, &found); cout <<"Previous" <<previous<<endl; head = insert_Node(head, previous, nextData); cout <<"Number of Seats Required inserted"<<endl; //insert node between first node and head cout <<"Name"<<endl; cin >>newNodeData; previous = search( head, newNodeData, &found); cout <<"Previous" <<previous<<endl; head = insert_Node(head, previous, newNodeData); cout <<"Name inserted"<<endl; //insert node between node and head cout <<"Address "<<endl; cin >>newNodeData; previous = search( head, newNodeData, &found); cout <<"Previous" <<previous<<endl; head = insert_Node(head, previous, newNodeData); cout <<"Address inserted"<<endl; //place node as very last node cin >>lastData; previous = search( head, lastData, &found); cout <<"Previous" <<previous<<endl; head = insert_Node(head, previous, lastData); cout <<"C"<<endl; displayList(head); char Ans = 'y'; //Delete nodes do { cout <<"Enter Keyword to be delete"<<endl; cin >>nextData; previous = search( head, nextData, &found); if (found == 1) head = delete_node( head, previous,nextData); displayList(head); cout <<"Do you want to Delete more y /n "<<endl; cin >> Ans; } while( Ans =='y'); int choice, i=0, counter=0; int fclass[10]; int coach[10]; printf("Welcome to the booking program"); printf("\n-----------------"); do{ printf("\n Please pick one of the following option:"); printf("\n 1) Reserve a first class seat on Flight 101."); printf("\n 2) Reserve a coach seat on Flight 101."); printf("\n 3) Quit "); printf("\n ---------------------------------------------------------------------"); printf("\nYour choice?"); scanf("%d",&choice); switch(choice) { case 1: i++; if (i <10){ printf("Here is your seat: %d " , fclass[i]); } else if (i = 10) { printf("Sorry there is no more seats on First Class. Please wait for the next flight"); } break; case 2: if (i <10){ printf("Here is your Seat Coach: %d " , coach[i]); } else if ( i = 10) { printf("Sorry their is no more Seats on Coach. Please wait for the next flight"); } break; case 3: printf("Thank you and goodbye\n"); //exit(0); } } while (choice != 3); } /******************************************************* search function to return previous position of node ******************************************************/ node * search( node *head, string key, int *found) { node * previous, * current; current = head; previous = current; *found = 0;//not found //if (current->word < key) move through links until the next link //matches or current_word > key while( current !=NULL) { //compare exactly if (key ==current->word ) { *found = 1; break; } //if key is less than word else if ( key < current->word ) break; else { //previous stays one link behind current previous = current; current = previous -> link; } } return previous; } /******************************************************** display function as used with createList ******************************************************/ void displayList(node *head) { node * current; //current now contains the address held of the 1st node similar //to head current = head; cout << "\n\n"; if( current ==NULL) cout << "Empty List\n\n"; else { /*Keep going displaying the contents of the list and set current to the address of the next node. When set to null, there are no more nodes */ while(current !=NULL) { cout << current->word<<endl; current = current ->link; } } } /************************************************************ insert node used to position node (i) empty list head = NULL (ii) to position node before the first node key < head->word (iii) every other position including the end of the list This is done using the following steps (a) Pass in all the details to create the node either details or a whole record (b) Pass the details over to fill the node (C) Use the if statement to add the node to the list **********************************************************/ node * insert_Node( node * head, node * previous, string key ) { node * new_node, * temp; new_node = new node; //create the node new_node ->word = key; new_node -> link = NULL; if (head == NULL || key < head->word ) //empty list { //give address of head to temp temp = head; //head now points to the new_node head = new_node; //new_node now points to what head was pointing at new_node -> link = temp; } else { //pass address held in link to temp temp = previous-> link; //put address of new node to link of previous previous -> link = new_node; //pass address of temp to link of new node new_node -> link = temp; } return head; } node * delete_node( node *head, node * previous, string key) { /* this function will delete a node but will not return its contents */ node * temp; if(key == head->word) //delete node at head of list { temp = head; //point head at the next node head = head -> link; } else { //holds the address of the node after the one // to be deleted temp = previous-> link; /*assign the previous to the address of the present node to be deleted which holds the address of the next node */ previous-> link = previous-> link-> link; } delete temp; return head; }//end delete The problem i have is when i Enter in the Number 2 in the Node(Seats) i like to get a Counter Taken 2 off of 50, some thing like what i have here enter code here int choice, i=0, counter=0; int fclass[10]; int coach[10]; printf("Welcome to the booking program"); printf("\n-----------------"); do{ printf("\n Please pick one of the following option:"); printf("\n 1) Reserve a first class seat on Flight 101."); printf("\n 2) Reserve a coach seat on Flight 101."); printf("\n 3) Quit "); printf("\n ---------------------------------------------------------------------"); printf("\nYour choice?"); scanf("%d",&choice); switch(choice) { case 1: i++; if (i <10){ printf("Here is your seat: %d " , fclass[i]); } else if (i = 10) { printf("Sorry there is no more seats on First Class. Please wait for the next flight"); } break; case 2: if (i <10){ printf("Here is your Seat Coach: %d " , coach[i]); } else if ( i = 10) { printf("Sorry their is no more Seats on Coach. Please wait for the next flight"); } break; case 3: printf("Thank you and goodbye\n"); //exit(0); } } while (choice != 3); How can i get what the User enters into number of Seats into this function

    Read the article

  • Validating textboxes and checkboxes then add the values of those checkboxes

    - by TiTi Nguyen
    I am very new to Javascript. I am running to a problem and don't know how to solve it. Could you please help? Basically, I want to create some textboxes and checkboxes in a form. Then I have to validate those fields, and add the values of the checkboxes if they are selected. One of the textboxes asking for how many semesters attended, and 3 checkboxes with value of 100, 1000, and 750. Whichever checkbox is selected, it should multiply its value to the number of semesters attended. For example if the first two checkboxes are selected then totalCost = (100+1000)* semester. Here is my code: User Name: <label>User Address: <input type = "text" id ="address" size = "30"/></label> <br/><br/> <label> User E-mail address: <input type = "text" id ="email" size = "30"/></label> <br/><br/> <label> User Phone number: <input type = "text" id ="phone" size = "30"/></label> <br/><br/> <label> User area code: <input type = "text" id ="area" size = "30"/></label> <br/><br/> <label> User SSN: <input type = "text" id ="ssn" size = "30"/></label> <br/><br/> <label> User Birthday: <input type = "text" id ="birthday" size = "30"/></label> <br/><br/> <label> Number of semester attended: <input type = "text" id ="semester" size = "3"/></label> <br/><br/> <label><input type="checkbox" id="box_book" value="100"/>Books $100 per semester</label> <br/> <label><input type="checkbox" id="box_tuition" value="1000"/>Tuition $1000 per semester</label> <br/> <label><input type="checkbox" id="box_room" value="750"/>Room and Board $750 per semester</label> <br/> <input type="reset" id="reset"/> <input type="submit" id="submit" onclick="checking()"/> <p/> </form> function checking() { var name=document.forms["myForm"]["name"].value; var address=document.forms["myForm"]["address"].value; var email=document.forms["myForm"]["email"].value; var atpos=email.indexOf("@"); var dotpos=email.lastIndexOf("."); var phone=document.forms["myForm"]["phone"].value; var area=document.forms["myForm"]["area"].value; var ssn=document.forms["myForm"]["ssn"].value; var birth=document.forms["myForm"]["birthday"].value; var semester=document.forms["myForm"]["semester"].value; var boxBook = document.forms["myForm"]["box_book"].value; var boxTuition = document.forms["myForm"]["box_tuition"].value; var boxRoom = document.forms["myForm"]["box_room"].value; if (name==null || name=="") { alert("Please fill in your name."); return false; } if (address==null || address=="") { alert("Please fill in your address."); return false; } if (atpos<1 || dotpos<atpos+2 || dotpos+2>=email.length) { alert("The email (" + email + ") is not a valid e-mail address. Please reenter your email address."); return false; } if(phone.length!=10) { alert("Phone number entered in incorrect form. Please reenter phone number in the correct form which contains 10 numbers."); return false; } if (area==null || area=="") { alert("Please fill in the area code"); return false; } if(ssn.length!=9) { alert("SSN entered in incorrect form. Please reenter SSN."); return false; } if (birth==null || birth=="") { alert("Please fill in your date of birth."); return false; } if (semester==null || semester=="") { alert("How many semester have you attended?"); return false; } if (document.getElementById("box_book").checked == false && document.getElementById("box_tuition").checked == false && document.getElementById("box_room").checked == false) { alert("You must select one of the checkboxes"); return false; } if (document.getElementById("box_book").checked ==true) { var subcost = boxBook; var totalcost = subcost * semester; alert ("Your total cost is: $" + totalcost); } if (document.getElementById("box_book").checked == true && document.getElementById("box_tuition").checked == true) { var subcost = boxBook + boxTuition; var totalcost = subcost * semester; alert ("Your total cost is: $" + totalcost); } if (document.getElementById("box_book").checked == true && document.getElementById("box_tuition").checked == true && document.getElementById("box_room").checked == true) { var subcost = boxBook + boxTuition + boxRoom; var totalcost = subcost * semester; alert ("Your total cost is: $" + totalcost); } if (document.getElementById("box_tuition").checked ==true) { var subcost = boxTuition; var totalcost = subcost * semester; alert ("Your total cost is: $" + totalcost); } if (document.getElementById("box_tuition").checked == true && document.getElementById("box_room").checked == true) { var subcost = boxTuition + boxRoom; var totalcost = subcost * semester; alert ("Your total cost is: $" + totalcost); } if (document.getElementById("box_room").checked ==true) { var subcost = boxRoom; var totalcost = subcost * semester; alert ("Your total cost is: $" + totalcost); } if (document.getElementById("box_book").checked == true && document.getElementById("box_room").checked == true) { var subcost = boxBook + boxRoom; var totalcost = subcost * semester; alert ("Your total cost is: $" + totalcost); } else return false; } When I hit the submit button, nothing happens!! Please help.

    Read the article

  • getaddrinfo appears to return different results between Windows and Ubuntu?

    - by MrDuk
    I have the following two sets of code: Windows #undef UNICODE #include <winsock2.h> #include <ws2tcpip.h> #include <stdio.h> // link with Ws2_32.lib #pragma comment (lib, "Ws2_32.lib") int __cdecl main(int argc, char **argv) { //----------------------------------------- // Declare and initialize variables WSADATA wsaData; int iResult; INT iRetval; DWORD dwRetval; argv[1] = "www.google.com"; argv[2] = "80"; int i = 1; struct addrinfo *result = NULL; struct addrinfo *ptr = NULL; struct addrinfo hints; struct sockaddr_in *sockaddr_ipv4; // struct sockaddr_in6 *sockaddr_ipv6; LPSOCKADDR sockaddr_ip; char ipstringbuffer[46]; DWORD ipbufferlength = 46; /* // Validate the parameters if (argc != 3) { printf("usage: %s <hostname> <servicename>\n", argv[0]); printf("getaddrinfo provides protocol-independent translation\n"); printf(" from an ANSI host name to an IP address\n"); printf("%s example usage\n", argv[0]); printf(" %s www.contoso.com 0\n", argv[0]); return 1; } */ // Initialize Winsock iResult = WSAStartup(MAKEWORD(2, 2), &wsaData); if (iResult != 0) { printf("WSAStartup failed: %d\n", iResult); return 1; } //-------------------------------- // Setup the hints address info structure // which is passed to the getaddrinfo() function ZeroMemory( &hints, sizeof(hints) ); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_STREAM; // hints.ai_protocol = IPPROTO_TCP; printf("Calling getaddrinfo with following parameters:\n"); printf("\tnodename = %s\n", argv[1]); printf("\tservname (or port) = %s\n\n", argv[2]); //-------------------------------- // Call getaddrinfo(). If the call succeeds, // the result variable will hold a linked list // of addrinfo structures containing response // information dwRetval = getaddrinfo(argv[1], argv[2], &hints, &result); if ( dwRetval != 0 ) { printf("getaddrinfo failed with error: %d\n", dwRetval); WSACleanup(); return 1; } printf("getaddrinfo returned success\n"); // Retrieve each address and print out the hex bytes for(ptr=result; ptr != NULL ;ptr=ptr->ai_next) { printf("getaddrinfo response %d\n", i++); printf("\tFlags: 0x%x\n", ptr->ai_flags); printf("\tFamily: "); switch (ptr->ai_family) { case AF_UNSPEC: printf("Unspecified\n"); break; case AF_INET: printf("AF_INET (IPv4)\n"); sockaddr_ipv4 = (struct sockaddr_in *) ptr->ai_addr; printf("\tIPv4 address %s\n", inet_ntoa(sockaddr_ipv4->sin_addr) ); break; case AF_INET6: printf("AF_INET6 (IPv6)\n"); // the InetNtop function is available on Windows Vista and later // sockaddr_ipv6 = (struct sockaddr_in6 *) ptr->ai_addr; // printf("\tIPv6 address %s\n", // InetNtop(AF_INET6, &sockaddr_ipv6->sin6_addr, ipstringbuffer, 46) ); // We use WSAAddressToString since it is supported on Windows XP and later sockaddr_ip = (LPSOCKADDR) ptr->ai_addr; // The buffer length is changed by each call to WSAAddresstoString // So we need to set it for each iteration through the loop for safety ipbufferlength = 46; iRetval = WSAAddressToString(sockaddr_ip, (DWORD) ptr->ai_addrlen, NULL, ipstringbuffer, &ipbufferlength ); if (iRetval) printf("WSAAddressToString failed with %u\n", WSAGetLastError() ); else printf("\tIPv6 address %s\n", ipstringbuffer); break; case AF_NETBIOS: printf("AF_NETBIOS (NetBIOS)\n"); break; default: printf("Other %ld\n", ptr->ai_family); break; } printf("\tSocket type: "); switch (ptr->ai_socktype) { case 0: printf("Unspecified\n"); break; case SOCK_STREAM: printf("SOCK_STREAM (stream)\n"); break; case SOCK_DGRAM: printf("SOCK_DGRAM (datagram) \n"); break; case SOCK_RAW: printf("SOCK_RAW (raw) \n"); break; case SOCK_RDM: printf("SOCK_RDM (reliable message datagram)\n"); break; case SOCK_SEQPACKET: printf("SOCK_SEQPACKET (pseudo-stream packet)\n"); break; default: printf("Other %ld\n", ptr->ai_socktype); break; } printf("\tProtocol: "); switch (ptr->ai_protocol) { case 0: printf("Unspecified\n"); break; case IPPROTO_TCP: printf("IPPROTO_TCP (TCP)\n"); break; case IPPROTO_UDP: printf("IPPROTO_UDP (UDP) \n"); break; default: printf("Other %ld\n", ptr->ai_protocol); break; } printf("\tLength of this sockaddr: %d\n", ptr->ai_addrlen); printf("\tCanonical name: %s\n", ptr->ai_canonname); } freeaddrinfo(result); WSACleanup(); return 0; } Ubuntu /* ** listener.c -- a datagram sockets "server" demo */ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <errno.h> #include <string.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #define MYPORT "4950" // the port users will be connecting to #define MAXBUFLEN 100 // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } int main(void) { int sockfd; struct addrinfo hints, *servinfo, *p; int rv; int numbytes; struct sockaddr_storage their_addr; char buf[MAXBUFLEN]; socklen_t addr_len; char s[INET6_ADDRSTRLEN]; memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; // set to AF_INET to force IPv4 hints.ai_socktype = SOCK_DGRAM; hints.ai_flags = AI_PASSIVE; // use my IP if ((rv = getaddrinfo(NULL, MYPORT, &hints, &servinfo)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(rv)); return 1; } // loop through all the results and bind to the first we can for(p = servinfo; p != NULL; p = p->ai_next) { if ((sockfd = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) == -1) { perror("listener: socket"); continue; } if (bind(sockfd, p->ai_addr, p->ai_addrlen) == -1) { close(sockfd); perror("listener: bind"); continue; } break; } if (p == NULL) { fprintf(stderr, "listener: failed to bind socket\n"); return 2; } freeaddrinfo(servinfo); printf("listener: waiting to recvfrom...\n"); addr_len = sizeof their_addr; if ((numbytes = recvfrom(sockfd, buf, MAXBUFLEN-1 , 0, (struct sockaddr *)&their_addr, &addr_len)) == -1) { perror("recvfrom"); exit(1); } printf("listener: got packet from %s\n", inet_ntop(their_addr.ss_family, get_in_addr((struct sockaddr *)&their_addr), s, sizeof s)); printf("listener: packet is %d bytes long\n", numbytes); buf[numbytes] = '\0'; printf("listener: packet contains \"%s\"\n", buf); close(sockfd); return 0; } When I attempt www.google.com, I don't get the ipv6 socket returned on Windows - why is this? Outputs: (ubuntu) caleb@ub1:~/Documents/dev/cs438/mp0/MP0$ ./a.out www.google.com IP addresses for www.google.com: IPv4: 74.125.228.115 IPv4: 74.125.228.116 IPv4: 74.125.228.112 IPv4: 74.125.228.113 IPv4: 74.125.228.114 IPv6: 2607:f8b0:4004:803::1010 Outputs: (win) Calling getaddrinfo with following parameters: nodename = www.google.com servname (or port) = 80 getaddrinfo returned success getaddrinfo response 1 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.114 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 2 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.115 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 3 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.116 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 4 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.112 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 5 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.113 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null)

    Read the article

  • Automating Solaris 11 Zones Installation Using The Automated Install Server

    - by Orgad Kimchi
    Introduction How to use the Oracle Solaris 11 Automated install server in order to automate the Solaris 11 Zones installation. In this document I will demonstrate how to setup the Automated Install server in order to provide hands off installation process for the Global Zone and two Non Global Zones located on the same system. Architecture layout: Figure 1. Architecture layout Prerequisite Setup the Automated install server (AI) using the following instructions “How to Set Up Automated Installation Services for Oracle Solaris 11” The first step in this setup will be creating two Solaris 11 Zones configuration files. Step 1: Create the Solaris 11 Zones configuration files  The Solaris Zones configuration files should be in the format of the zonecfg export command. # zonecfg -z zone1 export > /var/tmp/zone1# cat /var/tmp/zone1 create -b set brand=solaris set zonepath=/rpool/zones/zone1 set autoboot=true set ip-type=exclusive add anet set linkname=net0 set lower-link=auto set configure-allowed-address=true set link-protection=mac-nospoof set mac-address=random end  Create a backup copy of this file under a different name, for example, zone2. # cp /var/tmp/zone1 /var/tmp/zone2 Modify the second configuration file with the zone2 configuration information You should change the zonepath for example: set zonepath=/rpool/zones/zone2 Step2: Copy and share the Zones configuration files  Create the NFS directory for the Zones configuration files # mkdir /export/zone_config Share the directory for the Zones configuration file # share –o ro /export/zone_config Copy the Zones configuration files into the NFS shared directory # cp /var/tmp/zone1 /var/tmp/zone2  /export/zone_config Verify that the NFS share has been created using the following command # share export_zone_config      /export/zone_config     nfs     sec=sys,ro Step 3: Add the Global Zone as client to the Install Service Use the installadm create-client command to associate client (Global Zone) with the install service To find the MAC address of a system, use the dladm command as described in the dladm(1M) man page. The following command adds the client (Global Zone) with MAC address 0:14:4f:2:a:19 to the s11x86service install service. # installadm create-client -e “0:14:4f:2:a:19" -n s11x86service You can verify the client creation using the following command # installadm list –c Service Name  Client Address     Arch   Image Path ------------  --------------     ----   ---------- s11x86service 00:14:4F:02:0A:19  i386   /export/auto_install/s11x86service We can see the client install service name (s11x86service), MAC address (00:14:4F:02:0A:19 and Architecture (i386). Step 4: Global Zone manifest setup  First, get a list of the installation services and the manifests associated with them: # installadm list -m Service Name   Manifest        Status ------------   --------        ------ default-i386   orig_default   Default s11x86service  orig_default   Default Then probe the s11x86service and the default manifest associated with it. The -m switch reflects the name of the manifest associated with a service. Since we want to capture that output into a file, we redirect the output of the command as follows: # installadm export -n s11x86service -m orig_default >  /var/tmp/orig_default.xml Create a backup copy of this file under a different name, for example, orig-default2.xml, and edit the copy. # cp /var/tmp/orig_default.xml /var/tmp/orig_default2.xml Use the configuration element in the AI manifest for the client system to specify non-global zones. Use the name attribute of the configuration element to specify the name of the zone. Use the source attribute to specify the location of the config file for the zone.The source location can be any http:// or file:// location that the client can access during installation. The following sample AI manifest specifies two Non-Global Zones: zone1 and zone2 You should replace the server_ip with the ip address of the NFS server. <!DOCTYPE auto_install SYSTEM "file:///usr/share/install/ai.dtd.1"> <auto_install>   <ai_instance>     <target>       <logical>         <zpool name="rpool" is_root="true">           <filesystem name="export" mountpoint="/export"/>           <filesystem name="export/home"/>           <be name="solaris"/>         </zpool>       </logical>     </target>     <software type="IPS">       <source>         <publisher name="solaris">           <origin name="http://pkg.oracle.com/solaris/release"/>         </publisher>       </source>       <software_data action="install">         <name>pkg:/entire@latest</name>         <name>pkg:/group/system/solaris-large-server</name>       </software_data>     </software>     <configuration type="zone" name="zone1" source="file:///net/server_ip/export/zone_config/zone1"/>     <configuration type="zone" name="zone2" source="file:///net/server_ip/export/zone_config/zone2"/>   </ai_instance> </auto_install> The following example adds the /var/tmp/orig_default2.xml AI manifest to the s11x86service install service # installadm create-manifest -n s11x86service -f /var/tmp/orig_default2.xml -m gzmanifest You can verify the manifest creation using the following command # installadm list -n s11x86service  -m Service/Manifest Name  Status   Criteria ---------------------  ------   -------- s11x86service    orig_default        Default  None    gzmanifest          Inactive None We can see from the command output that the new manifest named gzmanifest has been created and associated with the s11x86service install service. Step 5: Non Global Zone manifest setup The AI manifest for non-global zone installation is similar to the AI manifest for installing the global zone. If you do not provide a custom AI manifest for a non-global zone, the default AI manifest for Zones is used The default AI manifest for Zones is available at /usr/share/auto_install/manifest/zone_default.xml. In this example we should use the default AI manifest for zones The following sample default AI manifest for zones # cat /usr/share/auto_install/manifest/zone_default.xml <?xml version="1.0" encoding="UTF-8"?> <!--  Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved. --> <!DOCTYPE auto_install SYSTEM "file:///usr/share/install/ai.dtd.1"> <auto_install>     <ai_instance name="zone_default">         <target>             <logical>                 <zpool name="rpool">                     <!--                       Subsequent <filesystem> entries instruct an installer                       to create following ZFS datasets:                           <root_pool>/export         (mounted on /export)                           <root_pool>/export/home    (mounted on /export/home)                       Those datasets are part of standard environment                       and should be always created.                       In rare cases, if there is a need to deploy a zone                       without these datasets, either comment out or remove                       <filesystem> entries. In such scenario, it has to be also                       assured that in case of non-interactive post-install                       configuration, creation of initial user account is                       disabled in related system configuration profile.                       Otherwise the installed zone would fail to boot.                     -->                     <filesystem name="export" mountpoint="/export"/>                     <filesystem name="export/home"/>                     <be name="solaris">                         <options>                             <option name="compression" value="on"/>                         </options>                     </be>                 </zpool>             </logical>         </target>         <software type="IPS">             <destination>                 <image>                     <!-- Specify locales to install -->                     <facet set="false">facet.locale.*</facet>                     <facet set="true">facet.locale.de</facet>                     <facet set="true">facet.locale.de_DE</facet>                     <facet set="true">facet.locale.en</facet>                     <facet set="true">facet.locale.en_US</facet>                     <facet set="true">facet.locale.es</facet>                     <facet set="true">facet.locale.es_ES</facet>                     <facet set="true">facet.locale.fr</facet>                     <facet set="true">facet.locale.fr_FR</facet>                     <facet set="true">facet.locale.it</facet>                     <facet set="true">facet.locale.it_IT</facet>                     <facet set="true">facet.locale.ja</facet>                     <facet set="true">facet.locale.ja_*</facet>                     <facet set="true">facet.locale.ko</facet>                     <facet set="true">facet.locale.ko_*</facet>                     <facet set="true">facet.locale.pt</facet>                     <facet set="true">facet.locale.pt_BR</facet>                     <facet set="true">facet.locale.zh</facet>                     <facet set="true">facet.locale.zh_CN</facet>                     <facet set="true">facet.locale.zh_TW</facet>                 </image>             </destination>             <software_data action="install">                 <name>pkg:/group/system/solaris-small-server</name>             </software_data>         </software>     </ai_instance> </auto_install> (optional) We can customize the default AI manifest for Zones Create a backup copy of this file under a different name, for example, zone_default2.xml and edit the copy # cp /usr/share/auto_install/manifest/zone_default.xml /var/tmp/zone_default2.xml Edit the copy (/var/tmp/zone_default2.xml) The following example adds the /var/tmp/zone_default2.xml AI manifest to the s11x86service install service and specifies that zone1 and zone2 should use this manifest. # installadm create-manifest -n s11x86service -f /var/tmp/zone_default2.xml -m zones_manifest -c zonename="zone1 zone2" Note: Do not use the following elements or attributes in a non-global zone AI manifest:     The auto_reboot attribute of the ai_instance element     The http_proxy attribute of the ai_instance element     The disk child element of the target element     The noswap attribute of the logical element     The nodump attribute of the logical element     The configuration element Step 6: Global Zone profile setup We are going to create a global zone configuration profile which includes the host information for example: host name, ip address name services etc… # sysconfig create-profile –o /var/tmp/gz_profile.xml You need to provide the host information for example:     Default router     Root password     DNS information The output should eventually disappear and be replaced by the initial screen of the System Configuration Tool (see Figure 2), where you can do the final configuration. Figure 2. Profile creation menu You can validate the profile using the following command # installadm validate -n s11x86service –P /var/tmp/gz_profile.xml Validating static profile gz_profile.xml...  Passed Next, instantiate a profile with the install service. In our case, use the following syntax for doing this # installadm create-profile -n s11x86service  -f /var/tmp/gz_profile.xml -p  gz_profile You can verify profile creation using the following command # installadm list –n s11x86service  -p Service/Profile Name  Criteria --------------------  -------- s11x86service    gz_profile         None We can see that the gz_profie has been created and associated with the s11x86service Install service. Step 7: Setup the Solaris Zones configuration profiles The step should be similar to the Global zone profile creation on step 6 # sysconfig create-profile –o /var/tmp/zone1_profile.xml # sysconfig create-profile –o /var/tmp/zone2_profile.xml You can validate the profiles using the following command # installadm validate -n s11x86service -P /var/tmp/zone1_profile.xml Validating static profile zone1_profile.xml...  Passed # installadm validate -n s11x86service -P /var/tmp/zone2_profile.xml Validating static profile zone2_profile.xml...  Passed Next, associate the profiles with the install service The following example adds the zone1_profile.xml configuration profile to the s11x86service  install service and specifies that zone1 should use this profile. # installadm create-profile -n s11x86service  -f  /var/tmp/zone1_profile.xml -p zone1_profile -c zonename=zone1 The following example adds the zone2_profile.xml configuration profile to the s11x86service  install service and specifies that zone2 should use this profile. # installadm create-profile -n s11x86service  -f  /var/tmp/zone2_profile.xml -p zone2_profile -c zonename=zone2 You can verify the profiles creation using the following command # installadm list -n s11x86service -p Service/Profile Name  Criteria --------------------  -------- s11x86service    zone1_profile      zonename = zone1    zone2_profile      zonename = zone2    gz_profile         None We can see that we have three profiles in the s11x86service  install service     Global Zone  gz_profile     zone1            zone1_profile     zone2            zone2_profile. Step 8: Global Zone setup Associate the global zone client with the manifest and the profile that we create in the previous steps The following example adds the manifest and profile to the client (global zone), where: gzmanifest  is the name of the manifest. gz_profile  is the name of the configuration profile. mac="0:14:4f:2:a:19" is the client (global zone) mac address s11x86service is the install service name. # installadm set-criteria -m  gzmanifest  –p  gz_profile  -c mac="0:14:4f:2:a:19" -n s11x86service You can verify the manifest and profile association using the following command # installadm list -n s11x86service -p  -m Service/Manifest Name  Status   Criteria ---------------------  ------   -------- s11x86service    gzmanifest                   mac  = 00:14:4F:02:0A:19    orig_default        Default  None Service/Profile Name  Criteria --------------------  -------- s11x86service    gz_profile         mac      = 00:14:4F:02:0A:19    zone2_profile      zonename = zone2    zone1_profile      zonename = zone1 Step 9: Provision the host with the Non-Global Zones The next step is to boot the client system off the network and provision it using the Automated Install service that we just set up. First, boot the client system. Figure 3 shows the network boot attempt (when done on an x86 system): Figure 3. Network Boot Then you will be prompted by a GRUB menu, with a timer, as shown in Figure 4. The default selection (the "Text Installer and command line" option) is highlighted.  Press the down arrow to highlight the second option labeled Automated Install, and then press Enter. The reason we need to do this is because we want to prevent a system from being automatically re-installed if it were to be booted from the network accidentally. Figure 4. GRUB Menu What follows is the continuation of a networked boot from the Automated Install server,. The client downloads a mini-root (a small set of files in which to successfully run the installer), identifies the location of the Automated Install manifest on the network, retrieves that manifest, and then processes it to identify the address of the IPS repository from which to obtain the desired software payload. Non-Global Zones are installed and configured on the first reboot after the Global Zone is installed. You can list all the Solaris Zones status using the following command # zoneadm list -civ Once the Zones are in running state you can login into the Zone using the following command # zlogin –z zone1 Troubleshooting Automated Installations If an installation to a client system failed, you can find the client log at /system/volatile/install_log. NOTE: Zones are not installed if any of the following errors occurs:     A zone config file is not syntactically correct.     A collision exists among zone names, zone paths, or delegated ZFS datasets in the set of zones to be installed     Required datasets are not configured in the global zone. For more troubleshooting information see “Installing Oracle Solaris 11 Systems” Conclusion This paper demonstrated the benefits of using the Automated Install server to simplify the Non Global Zones setup, including the creation and configuration of the global zone manifest and the Solaris Zones profiles.

    Read the article

  • Creating Google+ profile has changed a Google Apps for Business email name

    - by inbanco
    We use Google Apps for business for email, docs etc. For one account [email protected] I setup a Google+ profile but didn't realise it would change the name of the email account Was: From email name: "Sydney Branch" Email address: [email protected] Now: From email name: "John Smith" Email address: [email protected] I'd like to change it back. The name hasn't changed though in the Google Apps domain management email section though, so i don't know what's going on and don't want to lose that email address/account through suspension. I couldn't care less about losing Google+, i'm happy to remove that profile, but would it revert the name?

    Read the article

  • How google handle site traffic in google analytics

    - by Hamidreza
    I have a site with address www.exam.com and I have put Google analytics javascript scripts in it. I have made an app for my site, I want that everytime a user uses app, he visit the site in the application with built in browser which is inside the application ( I am using C# for application and .NET web browser ). User will address www.example.com/appvisit in the app and I just have put google analytics scripts in that page and nothing else. And I want to disallow this address /appvisit in my robots.txt file . I want to know that Is there any problem with doing this? will google crawl in the /appvisit directory ? Does google hate this work? and will google think this traffic is true and normal? thanks

    Read the article

  • Good alternative to NetLimiter(windows) for ubuntu

    - by Harsh
    there is program NetLimiter for windows. while I was using windows it was very useful to me to find out the IP address of ther person who was downloading from me, or to know IP address of any person on lan who was using DC++ with some nick. and after that I can easily know the computer name of that person using nbtstat. I was wondering if there is any tool for ubuntu using which I an find out the IP address of person who is downloading from me or from whom I am downloading on lan. I am on university lan and we are using PtokaX and DC++ for file sharing on lan. people sometimes put some offencive stuff on open chat on DC++ using some Nick and I don't know how to trace them while I am using Ubuntu. Plz help.

    Read the article

  • Removing Duplicate Data From SQL Query Output For Display On A Web Page [migrated]

    - by doubleJ
    I had asked a similar question on stackoverflow but didn't really get anywhere. This page shows the output that I'm currently getting from my MSSQL server. I have a table of venue information (name, address, etc...) that our events happen on. Separately, I have a table of the actual events that are scheduled (an event may happen multiple times in one day and/or over multiple days). I join those tables with this query: <?php try { $dbh = new PDO("sqlsrv:Server=localhost;Database=Sermons", "", ""); $dbh->setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION); $sql = "SELECT TOP (100) PERCENT dbo.TblSermon.Day, dbo.TblSermon.Date, dbo.TblSermon.Time, dbo.TblSermon.Speaker, dbo.TblSermon.Series, dbo.TblSermon.Sarasota, dbo.TblSermon.NonFlc, dbo.TblJoinSermonLocation.MeetingName, dbo.TblLocation.Location, dbo.TblLocation.Pastors, dbo.TblLocation.Address, dbo.TblLocation.City, dbo.TblLocation.State, dbo.TblLocation.Zip, dbo.TblLocation.Country, dbo.TblLocation.Phone, dbo.TblLocation.Email, dbo.TblLocation.WebAddress FROM dbo.TblLocation RIGHT OUTER JOIN dbo.TblJoinSermonLocation ON dbo.TblLocation.ID = dbo.TblJoinSermonLocation.Location RIGHT OUTER JOIN dbo.TblSermon ON dbo.TblJoinSermonLocation.Sermon = dbo.TblSermon.ID WHERE (dbo.TblSermon.Date >= { fn NOW() }) ORDER BY dbo.TblSermon.Date, dbo.TblSermon.Time"; $stmt = $dbh->prepare($sql); $stmt->execute(); $stmt->setFetchMode(PDO::FETCH_ASSOC); foreach ($stmt as $row) { echo "<pre>"; print_r($row); echo "</pre>"; } unset($row); $dbh = null; } catch(PDOException $e) { echo $e->getMessage(); } ?> So, as it loops through the query results, it creates an array for each record and ends up like this: Array ( [Day] => Tuesday [Date] => 2012-10-30 00:00:00.000 [Time] => 07:00 PM [Speaker] => Keith Moore [Location] => The Ark Church [Pastors] => Alan & Joy Clayton [Address] => 450 Humble Tank Rd. [City] => Conroe [State] => TX [Zip] => 77305.0 [Phone] => (936) 756-1988 [Email] => [email protected] [WebAddress] => http://www.thearkchurch.org ) Array ( [Day] => Wednesday [Date] => 2012-10-31 00:00:00.000 [Time] => 07:00 PM [Speaker] => Keith Moore [Location] => The Ark Church [Pastors] => Alan & Joy Clayton [Address] => 450 Humble Tank Rd. [City] => Conroe [State] => TX [Zip] => 77305.0 [Phone] => (936) 756-1988 [Email] => [email protected] [WebAddress] => http://www.thearkchurch.org ) Array ( [Day] => Tuesday [Date] => 2012-11-06 00:00:00.000 [Time] => 07:00 PM [Speaker] => Keith Moore [Location] => Fellowship Of Faith Christian Center [Pastors] => Michael & Joan Kalstrup [Address] => 18999 Hwy. 59 [City] => Oakland [State] => IA [Zip] => 51560.0 [Phone] => (712) 482-3455 [Email] => [email protected] [WebAddress] => http://www.fellowshipoffaith.cc ) Array ( [Day] => Wednesday [Date] => 2012-11-14 00:00:00.000 [Time] => 07:00 PM [Speaker] => Keith Moore [Location] => Faith Family Church [Pastors] => Michael & Barbara Cameneti [Address] => 8200 Freedom Ave NW [City] => Canton [State] => OH [Zip] => 44720.0 [Phone] => (330) 492-0925 [Email] => [WebAddress] => http://www.myfaithfamily.com ) As you can see, The Ark Church and its associated contact information is duplicated, so when I work with those arrays and output them to the page, I see a bunch of duplicate content. I'd like to remove the duplicate information so that I get results similar to this: The Ark Church Alan & Joy Clayton 450 Humble Tank Rd. Conroe, TX 77305 (936) 756-1988 [email protected] http://www.thearkchurch.org Meetings: Tuesday, 2012-10-30 07:00 PM Wednesday, 2012-10-31 07:00 PM Fellowship Of Faith Christian Center Michael & Joan Kalstrup 18999 Hwy. 59 Oakland, IA 51560 (712) 482-3455 [email protected] http://www.fellowshipoffaith.cc Meetings: Tuesday, 2012-11-06 07:00 PM Faith Family Church Michael & Barbara Cameneti 8200 Freedom Ave NW Canton, OH 44720 (330) 492-0925 http://www.myfaithfamily.com Meetings: Wednesday, 2012-11-14 07:00 PM It doesn't necessarily have to end up like that (I'm not looking for code specific for these results, but a concept of how to not show the duplicated information). I'm assuming that an additional foreach or while will do it, but I haven't figured out any logic that says <?php if ($location == $previouslocation) echo ""; ?>.

    Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >