Search Results

Search found 40420 results on 1617 pages for 'power line networking'.

Page 104/1617 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• wired connection not being recognised in ubuntu 10.04 lts

  - by arun

  I have windows7 installed on my C drive and ubuntu 10.04 lts on my D drive. When I plud the lan cable (ethernet cable) onto the ethernet card of my laptop, windows7 identifies the network correctly without the need for any manual settings and connects me to the network correctly. Unfortunately, in ubuntu, even after plugging in the cable, nothing happens (on the network side). It is only scanning for wireless networks it seems, and doesnt bother about the wired networks. I tried adding a new wired connection and manually entered the physical address which was displayed when i connected to the network using windows. i entered the phy address, and told it to use auto dhcp and saved the dialog bog in ubuntu network connection. Still there is no change, and ubuntu doesnt seem to recognise anything. please let me know how to work with wired connections using ubuntu, and why my wired cable is not being recognized in ubuntu. thanks. PS: I am pretty new to ubuntu/ linux :)

  Read the article

• How to change Port 27000 from filtered to open status

  - by Nadarajah Ranjan

  In my ubuntu box I am running flexlm licensing software on port 27000 and I am able to pull the license from the this port to run the simulation software locally. I am also trying to run the same software in another Linux machine (opensuse) by using the flexlm license from the Ubuntu box. However, my opensuse box is unable to communicate with port 27000 in my Ubuntu box. I have turned off the firewall on the Ubuntu box, played around with iptables and when I do a nmap from my opensuse box to Ubuntu box the message I get is that port 27000 is on filtered status. My understanding is that filtered status does not allow the opensuse box to communicate with Ubuntu. My question is how to change port 27000 from filtered status to open status? Hope someone can help me out. Thank you.

  Read the article

• How to change the IP address on my Ubuntu virtual NIC

  - by DextrousDave

  I have a physical windows system, on which I run Vmware Workstation. Now on VMware I run Ubuntu 12.10. I am running a webserver on Ubuntu via LAMP, inside VMware. Problem: Now my local IP address for my virtual NIC (the one Ubuntu is using) has an address of 192.168.159.7, and my home router only issues IP addresses of the range 10.0.0.x. So if I want to port forward to the virtual NIC, which has a 192.168 address, I cannot, so my LAMP webserver cannot be accessed externally since the router does not know to send the packets on port 80 to the virtual NIC... How do I fix that? The only way I guess is to assign a 10.0.0.x ip address to the virtual NIC?? But how do I do that? I tried to do it on the host Windows machine with 'Get my IP address automatically' but it issues a 192.168 address every time... Thank you

  Read the article

• Sending state diffs (deltas) and unreliable connections

  - by spaceOwl

  We're building a realtime multiplayer game, in which each player is responsible for reporting its state on every iteration of the game loop. The state updates are broadcasted using unreliable UDP. To minimize state data sending, we've come up with a system that will send only deltas (whatever state data that was changed). This method however is flawed, since a lost packet will mean that other players will not receive the delta, making the game behave in an unexpected way. For example: Assume that state is comprised of: { positionX, positionY, health } Frame 1 - positionX changed --> send a packet with positionX only. Frame 2 - health changed // lost ! Frame 3 - positionY changed --> send a packet with positionY only. // Other players don't know about health change. How can one overcome this issue then? sending the entire data is not always feasible.

  Read the article

• After update UBUNTU 12.04 changes wired interface from eth0 to eth1, network configuration fails

  - by Don McLaren

  I have been running UBUNTU 12.04 for a couple of months on this system with no problems. After a recent update, the bootup fails to define the wired network interface as eth0, so the default network configuration fails. ifconfig -a shows eth1 instead, as unconfigured. Booting from CD works OK, configures eth0 as normal. Solution: sudo NetworkManager The network manager figures out the situation, and configures eth1 Question: Where did this problem come from all of a sudden?

  Read the article

• System freeze after opening Wi-Fi menu can boot into the machine and use Internet in recovery mode

  - by Michael

  So right now sitting in front of my Alienware area 51 desktop. It has a Broadcom Netlink BCM 5784M gigabit ethernet PCI E card. Most of the time able to get through the login screen and to the main screen if I click on the wireless settings on the top right-hand corner the system immediately freezes the cursor does not move at all keyboards are unresponsive. I was doing some quick Google searching and I found a suggestion to boot into recovery mode I did this and did a apt-get Distribution update which ran successfully installed then I rebooted into the regular system same thing I'm pretty sure it's the network card because even if I don't click the settings if a network related dialog opens such as disconnection or connection the system again immediately freezes. I'm running Ubuntu 13.04 ** update 1 ** Just was able to use my system for a little bit however when I went into Firefox and hit the web it again froze so obviously a driver problem but I'm not sure how to get drivers for Broadcom which apparently according to the description on stack-overflow is terrible Any ideas? Sorry for lack of punctuation on an ipad.

  Read the article

• Procedural object generation and unique identification

  - by 2080

  My question relates to procedural content generation and data management of the emerging objects in a database. I assume a networked game, with a server-client model. Unspecified objects in the game world are generated while the game is running with procedural algorithms (for example perlin noise). The players (/clients) can modify the properties of these objects, but have to notify the server of these changes. How could this communication address unique objects, so that both the server and the client know of which object they are speaking? Not only the inner properties of the objects can differ, but also visible, such as the position. When the player wants to select one of these objects the game has to find out the id - does anyone know which methods or algorithms can accomplish that?

  Read the article

• 12.04 - why does the network icon dissapear every time my machine is turned off

  - by Howard Walker

  After spending an hour or two working out how to find the network Icon, I find that when I reboot the machine, I have to go through the whole procedure again. 1. The network menu is not there - so first I have to find the terminal. This has no particular location that I can find but usually I have to type terminal in the dash. 2. Then I have to type nm-applet in terminal 3. The network manager icon then appears, but only works if the terminal window remains open. Shut down the terminal window and the network disappears. This is a pain - plus I have to type my password in every time, which is another waste of time, thought this has always been a problem. So can anyone tell me how to make the web automatically connect at startup without any intervention from me.

  Read the article

• Programming bots in games

  - by Bane

  I'm interested in how bots are usually written. Here's my situation: I plan to make an online 2D mecha game in HTML5, and the server-side will be done with node. It is intended to be multiplayer, but I also want to make bots in case there aren't enough players. How does my game logic see them, as players or as bots? Is there a standard by which I should make them? Also, any general tips and hints will be OK.

  Read the article

• How do i Setup Different Users to Folders

  - by Erin

  I am trying to setup a Ubuntu Server for an office. Its going to be a file share server that 4-5 desktops connect to and access the files. Im planning on having different access for certain computers so computer 1 has full access but say computer 2 can only see a certain folder. My question is, is this possible and how would i go about setting it up? All workstations are using Windows XP - Vista.

  Read the article

• Ubuntu 12.04 lts cannot build a wireless connection

  - by Jupiterr

  Hi i just got a new notebook and it came with ubuntu 12.04 lts operation system. But it can't make a wireless connection. I plugged in my Ethernet cable and i can reach the Internet with it but I need wireless connection so much. This is the first time I'm using ubuntu so i'm really confused. I can see wireless networks (including mine) but i cannot use them. It seems like it's establishing a connection but soon it gives up. Please help, I don't have much time for this and I do not have any idea about operation systems.

  Read the article

• Ubuntu ver 14.04 Network discovery not showing up on windows 8 but on windows 7

  - by Schwabber

  I have an old PC that is now my new Ubuntu machine. Currently I was working on sharing a drive so that backups and streaming could take place. I have it set up perfectly on my windows 7 laptop (able to read and write to it). For some reason however my wife's windows 8 laptop is not showing up on the Ubuntu and vice versa. I turned on network discovery on the win8 machine, but that didn't help. Thanks in advance edit- I have my win7 and win8 in the same homegroup and both can see each other in the network. Also the workgroup is the same.

  Read the article

• trouble detecing huawei EC156 in ubuntu 12.04

  - by naina

  the data card is never detected automatically...its detected only when i fire a lsusb. Later i give modeswitch commands etc etc...then the device works fine..i can easily use internet...but once i disconnect from the net, its impossible to reestablish the connection...to reconnect i have to type all the commands, starting with lsusb, in the terminal again..ie every time i want a connection i have to sit and type 5-6 commands in the terminal before i can get through. what can be done to get automatic net connection as soon as i plug in the data card...please help...

  Read the article

• Quickly and Python Twisted

  - by Aaron

  I am creating a Quickly application that makes use of Python Twisted. When the user launches a window, I want to start the Twisted server I wrote. However, when I do this, it freezes the GUI, because the reactor.run method is constantly running after it is started. I need a way to start the Twisted reactor in its own thread, so that the GUI will continue to operate while the reactor is running. I have read about using Twisted with pyGTK in the Twisted documentation, but I am not sure how I would accomplish this with a Quickly application. What is the best way to start my Twisted server when a window opens without freezing the GUI? Update: My if __name__ == '__main__' statement at the end of my dialog file is: print 'Preparing GLib' GLib.idle_add(before_running) print 'Staring Reactor' from twisted.internet import reactor reactor.run()` I have imported and installed twisted.gtk3reactor earlier on in the file. The before_running method contains dialog = ClientDialog() and dialog.show, as well as the rest of the code I want to run when the dialog opens.

  Read the article

• Wireless not connecting on Ubuntu 13.10, Toshiba Satellite pro L 650

  - by user204842

  I have just installed Ubuntu 13.10 on my Toshiba Satellite Pro L650. After several reboots, installing/ uninstalling the broadcom driver I still can't connect. It detects the wi fi signals and the icon flashes as if it's trying to connect but never actually does. I'm really quite rubbish with code and stuff, but I really like Ubuntu as an OS and would really appreciate any suggestions anyone can offer! 02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v1.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)

  Read the article

• Advice on how to understand in general and in practice IT Infrastructure

  - by Luca

  My IT knowledge resides mainly in SW development. I have just some basic know how about networks. On the net I tried to get information and read books in order to better understand the overall IT infrastrcuture, but all the sources I found are too generic or, mainly, too detailed in just one aspect, making me lost. Could anyone suggest some books or web resources as good compromise in details? My goal would be able to understand the network issues and security threats when, for example, two remote system have to be setup and put in connection each other. Considering this scenario there are several aspects to consider: firewalls, intranet/internet interconnections, certificates for httpS, etc. The argument is quite wide, therefore I was looking for something that might help to start to understand this subject without going too deep in details (Computer Networks from A.Tanenbaum is a wonderful milestone, but way too specific for my scope). Thanks

  Read the article

• Hotspot is getting disconnected from other windows system?

  - by Gaurav_Java

  I created Hotspot for sharing my system internet for other system . but after 5 - 10 min my system internet is not able to share internet but it is connected with other windows system .windows showing (No internet access ) But after running this sudo killall dnsmasq windows is able to use internet connection not happening with one system same thing is happening with 2 -3 windows system . In many cases i have 2 restart my system Here My Hotspot setting

  Read the article

• Cannot connect to windows share

  - by BCqrstoO

  I've been going through and pouring over resource for the past few hours and I cannot get my box to connect to my friends network drive. My friend doesn't use linux, but he's setup the network share like this: DPR:\\name\images and he's given me the username and password which I've verified is correct. It is located on 192.168.0.2 sudo mount -t cifs -o username=***,password=*** //name/images /media/name/ sudo mount.cifs //192.168.0.2/name/images /media/name/ -o credentials=~/name.credentials (I've confirmed that ~/name.credentials does have the correct credentials as well) Regardless of what I attempt I get mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) I'm not sure what I'm doing wrong, but it's probably really simple and stupid. Thanks to any/all in advance. EDIT: I don't know if this helps, but I'm running Ubuntu 14.04.

  Read the article

• How do I get my RTL8192ce based wireless device working properly?

  - by JonnyTruelove

  I am using the rtl8192cu chipset (on a Belkin wireless USB adapter N300) combined with 64 bit architecture and the 3.8 kernel. Some of you may know that this doesn't work. I tried this fix - RTL8188CU USB Network Adaptor on ubuntu 13.04 and now my internet is super slow. I am totally new to Ubuntu and I am concerned I do not have the right driver. The "stock" driver was the RTL8192cu, but it didn't connect 99% of the time and if it did the upload speed was higher than the download. Right now I am connecting through my laptop with a crossover cable, so my internet connection is just fine in my apartment. Relevant output from lsusb is here: Bus 002 Device 002: ID 050d:2103 Belkin Components F7D2102 802.11n N300 Micro Wireless Adapter v3000 [Realtek RTL8192CU] (bonus question: is that [050d:2103] the actual physical address straight from the hardware? Or does it change when I put different drivers on it? I am concerned I do not have the right driver)

  Read the article

• Application to organize / manage installed networks

  - by vicmp3

  I was wondering if there is a Application where you can organize networks. I mean if you have installed some networks you have to note every pc's name, his ip-address and so on. Is there a Application where you can manage it? I saw the monitoring tools but that is not exactly what I'm looking for. Maybe I didnt explain me well, after all my englis his not so good :) For example if I install many different networks I write in a book how I configured them. I write pc-name ip-address ip-gateway ip-broadcast and so on for each network. It will be great if I can do it in a program to organize it well, and for example it gives me a node view of the network.

  Read the article

• Network print to brother MFC-7420

  - by trampster

  I am trying to pint to a Brother MFC-7420 from my ubuntu 10.04 machine. The brother is attached to a windows XP machine and is shared. This is what I have tried: System-Administration-Printing, Add, Expand Network Printer, Windows Printer via SAMBA, Browse (I can find the printer no problems here), Foward, Choose Driver Dialog, Brother, My printer is not in this list So the next thing I tried was to download the printer driver from here http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_prn.html The driver installed fine but my printer still does not appear in the list. I also tried installing the cups wrapper but that gave the following error. Restarting Common Unix Printing System: cupsd [ OK ] cp: cannot stat `/usr/share/cups/model/MFC7420.ppd': No such file or directory dpkg: error processing cupswrappermfc7420 (--install): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: cupswrappermfc7420 I tried connecting the printer directly but even though I have installed the driver, when I go to printers and click on the printer (it shows up fine as a USB printer) then it say searching for drivers and then gives me a list, this is the same list as before which doesn't have my printer. It really shouldn't be this hard. on window you don't have to installing anything it just works and the same is true for my brothers Mac. How do I print to my printer?

  Read the article

• unreachable subnet in one direction

  - by Carl Michaud

  I'm unable to route traffic to a subnet in my home. Here's my topology: INET <- Router A <- Router B <- WIFI AP where: Router A - ARRIS TG862G/CT (from comcast) - WAN DHCP, LAN 10.0.0.99 Router B - Linksys WRT400N with DD-WRT - WAN 10.0.0.12 , LAN 10.0.1.1 I was able to use DD-WRT to configure a static route for the 10.0.1.x network back to the 10.0.0.x network. But I'm not sure if i can do the reverse on the ARRIS router and was looking for suggestions on how to fix that. I've set things up this wasy because I am using OpenDNS to mange internet content for my kids and of course I wasn't able to configure DNS to my liking on Router A either. So at present I'm using Router A on 10.0.0.x to provide a private unfiltered WIFI AP (no ssid broadcast) that I use for netflix only and then I use router B to provide a filtered WIFI AP for the rest of my WIFI devices on 10.0.1.x. However I would like to be able to connect to my 10.0.1.x devices from the internet via dynamic dns; but I can't see anything behind router B this way. Thoughts?

  Read the article

• IP/PORT forward requests to another server

  - by DT.DTDG

  I have the following listening PORT:IP set up on my UBuntu server. 12.345.67.890:3636 It receives requests perfectly, however, I would now like to forward any requests to that IP:PORT to another IP:PORT, i.e.: 09.876.54.321:3636 Essentially I want to do a request forward 12.345.67.890:3636 -> 09.876.54.321:3636. How can I go about it in Terminal and if I wanted to change it back how can I go about that too? Is there also a way to test that the data is forwarding and it is setup properly? Thanks! Edit: Can I just do as follows, just wondering how I would go about testing it and how I could disable it? sysctl net.ipv4.ip_forward=1 iptables -t nat -A PREROUTING -p tcp --dport 3636 -j DNAT --to-destination 09.876.54.321:3636 iptables -t nat -A POSTROUTING -j MASQUERADE

  Read the article

• How to restart WiFi interface without rebooting (it drops connection)?

  - by Dima

  I boot into ubuntu and it connects to the Wifi network fine. After about 10-15min the DNS stop resolving any website and a couple of minutes later network-managers tells me that I'm disconnected and tries to reconnect constantly to my router and fails to do it. Upon Ubuntu restart everything works fine for the first 10-15min again. When I boot into Mac OS X everything is fine with the same connection! How do I restart wifi interface? sudo ifdow wlan0 just tells me that wlan0 is not configured and wlan0 doesn't appear in /etc/network/interfaces either, which I find strange.... (unless network-manager is doing it behind my back).

  Read the article

• Wireless connected but internet not working, modem is fine because I'm typing over wifi on my android

  - by Sandro Livaja

  I can't connect to the Internet in 11.10. I tried switching my wifi card to another USB slot but nothing changed. Is it possible that the card is able to connect while not being able to receive packages? $ ifconfig eth0 Link encap:Ethernet HWaddr 40:61:86:35:11:b0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 74:ea:3a:8c:d5:5c inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::76ea:3aff:fe8c:d55c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:102 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1209 (1.2 KB) TX bytes:15329 (15.3 KB)

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >