Search Results

Search found 4726 results on 190 pages for 'ram jaiswal'.

Page 104/190 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Idle VMware Guests Resource Consumption

  - by Ravenor

  I want to setup a number of guests with multiple CPUs (4) and at least 4Gb ram running Ubuntu Linux. These machines will mostly be idle, but from time to time their workload will require all their resources, especially the CPU. The hosts are ESXi 5.x. The question is, am I right in thinking that the resource consumption of the machines when idle will be negligible? We know this true of disk and the CPU. The only concern left therefore is memory. Since ESX over-commits memory it makes sense that unused memory of any guest is paged out. If my thinking correct?

  Read the article

• How do I make Linux recognize a new SATA /dev/sda drive I hot swapped in without rebooting?

  - by Philip Durbin

  Hot swapping out a failed SATA /dev/sda drive worked fine, but when I went to swap in a new drive, it wasn't recognized: [root@fs-2 ~]# tail -18 /var/log/messages May 5 16:54:35 fs-2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen May 5 16:54:35 fs-2 kernel: ata1: SError: { PHYRdyChg CommWake } May 5 16:54:40 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:45 fs-2 kernel: ata1: device not ready (errno=-16), forcing hardreset May 5 16:54:45 fs-2 kernel: ata1: soft resetting link May 5 16:54:50 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:54:55 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:54:55 fs-2 kernel: ata1: soft resetting link May 5 16:55:00 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:05 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:05 fs-2 kernel: ata1: soft resetting link May 5 16:55:10 fs-2 kernel: ata1: link is slow to respond, please be patient (ready=0) May 5 16:55:40 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:40 fs-2 kernel: ata1: limiting SATA link speed to 1.5 Gbps May 5 16:55:40 fs-2 kernel: ata1: soft resetting link May 5 16:55:45 fs-2 kernel: ata1: SRST failed (errno=-16) May 5 16:55:45 fs-2 kernel: ata1: reset failed, giving up May 5 16:55:45 fs-2 kernel: ata1: EH complete I tried a couple things to make the server find the new /dev/sda, such as rescan-scsi-bus.sh but they didn't work: [root@fs-2 ~]# echo "---" > /sys/class/scsi_host/host0/scan -bash: echo: write error: Invalid argument [root@fs-2 ~]# [root@fs-2 ~]# /root/rescan-scsi-bus.sh -l [snip] 0 new device(s) found. 0 device(s) removed. [root@fs-2 ~]# [root@fs-2 ~]# ls /dev/sda ls: /dev/sda: No such file or directory I ended up rebooting the server. /dev/sda was recognized, I fixed the software RAID, and everything is fine now. But for next time, how can I make Linux recognize a new SATA drive I have hot swapped in without rebooting? The operating system in question is RHEL5.3: [root@fs-2 ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.3 (Tikanga) The hard drive is a Seagate Barracuda ES.2 SATA 3.0-Gb/s 500-GB, model ST3500320NS. Here is the lscpi output: [root@fs-2 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) Update: In perhaps a dozen cases, we've been forced to reboot servers because hot swap hasn't "just worked." Thanks for the answers to look more into the SATA controller. I've included the lspci output for the problematic system above (hostname: fs-2). I could still use some help understanding what exactly isn't supported hardware-wise in terms of hot swap for that system. Please let me know what other output besides lspci might be useful. The good news is that hot swap "just worked" today on one of our servers (hostname: www-1), which is very rare for us. Here is the lspci output: [root@www-1 ~]# lspci 00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3) 00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) 00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) 00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) 00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3) 00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) 00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:09.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:19.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 03:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02) 04:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 04:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) 09:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS (rev 04)

  Read the article

• Browsers not responding

  - by Jesper

  Hello, Strange thing started to happen to my computer yesterday, and I can not recall installing anything new or updating anything the last few days either. It was first the browser, Chromium, that started to freeze up and not respond for ages, say 10 minutes. Then my email, Windows Live Mail client started doing the same thing, I click on an email and the program goes "not responding" for 5-10 minutes. At first I thought it was Chromium, so i reinstalled it but no help, So i installed Opera and thought I would give it t a try, but not same thing is happening to Opera so it is clearly an OS issue or/and internet connection issue. Does anyone know what the problem can be? Im running Windows 7 32bit on a dual core Sony vaio laptop with 4gb ram. There is nothing wrong with the actual internet connection as it works fine on other computers on the network, and the connection it self does not drop. Grateful for any help, Jesper

  Read the article

• Can I use a Mac Mini as a web server and database server? What are the pros and cons?

  - by Christopher Altman

  We are a bootstrapped web start up. We have a LAMP web application that we expect relatively low to mid traffic because users need an account to log in. Our current approach is to colocate two servers, a web and mysql database server. We are planning to use Ubuntu Server 9.04. We have shopped around for dedicated servers but the price range from $900 to $1500 per month, therefore we are exploring the colocation approach. We are considering purchasing two Mac Minis (2.0GHz Intel Core 2 Duo 2 Gb RAM) because we are familiar with the machines are the prices are relatively inexpensive. What are the pros and cons of using these 'non-server' grade machines? We would install Ubuntu Sever and attach firewire external hard drives. Any advice on how to set up 'good-and-economic' web/database servers is welcomed.

  Read the article

• Hyper-V performance comparisons vs physical client?

  - by rwmnau

  Are there any comparisons between Hyper-V client machines and their physical equivalent? I've looked around and can find 4000 articles about improving Hyper-V performance, but I can't find any that actually do a side-by-side comparison or give benchmarking numbers. Ideally, I'm interested in a comparison of CPU, memory, disk, and graphics performance between something like the following: Some powerful workstation (with plenty of RAM) with Windows 7 installed on it directly Same exact worksation with Hyper-V Server 2008 R2 (the bare Server role) and a full-screen Windows 7 client machine Virtual Server 2005 had performance that didn't compare at all with actual hardware, but with the advances in CPU and hardware-level virtualization, has performance improved significantly? How obvious would it be to a user of the two above scenarios that one of them was virtualized, and does anybody know of actual benchmarking of this type?

  Read the article

• Bad I/O scheduler?

  - by user62367

  os: up-to-date Fedora 14. Working as a "normal desktop". It's doing very well, but if i start VirtualBox, and e.g.: install a guest on it, it just "freezez". I mean if there are disk activities on a VirtualBox guest, then the computer becomes unrespondable..even the mouse is laggin for about 50 minutes.. What could be the bottleneck? What could be the problem? If anyone has any tips/howtos to speed it up, please help! It has a normal 2,5" HDD, with 5400 RPM. Does it worth for me if i buy a 2,5" HDD with 7200 RPM? T7200 cpu, 4 GByte RAM, "vm.swappiness = 0". Thank you!

  Read the article

• Anyone know of a good way to sell used servers?

  - by RandyMorris

  We have a couple of servers we no longer need now that we are fully hosted on a managed host (rackspace). They were purchased for over $10,000 each but we realize that over time their monetary value drops. Anyone have suggestions or experience selling these in a proper way? They are dual xeon processor 2U rack mountable with 4+GB RAM, intel boards, 6x 72GB 15,000 RPM SCSI Drives with raid controller redundant power supply. We are in Southern California area. I can be more specific on any information if there is interest. I know there is ebay and the like but these servers are like the family dog that has to be given up and we are looking for a proper home for a fair price. I will end up auctioning it off if need be in the end though. Thanks in advanced for any help!

  Read the article

• amazon ec2 pricing

  - by Pradyut Bhattacharya

  I m really confused. I was trying to buy hosting at amazon ec2. My site will not be having much of a traffic and i will be installing glassfish and mysql. Usage will be 1gb of ram and around less than 5gb of hardisk and same bandwidth. As mine is a startup, the number of hits per day would be less than 20hits per day, each hit having around 10mins time. How should i calculate the price on the ec2 calculator. Thanks

  Read the article

• Newbie ask Swap Value: How much Swap do I have?

  - by Cintaku

  When looking vmstat, this is what I got: procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 2872 0 0 0 0 8 17 0 14 3 1 94 2 0 the cache is 0. I have no idea how much the whole swap I have. But when not enough RAM (256 MB), the swap will be used and look like below: procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 3 1 2468 0 0 0 0 0 8 17 0 16 3 1 94 2 0

  Read the article

• Ubuntu Server Edition (Jaunty) x64 Segmentation faults in PHP mysql package

  - by Deeksy

  I've been running Jaunty with Apache2, PHP & MySQL running drupal websites as well as python 2.6 and trac on the same server. I'm getting quite a few segmentation faults and suhosin warnings on my drupal websites which don't seem to be related to the amount of RAM the server has (3GB) as the trac site is running happily without issues. The issue seems to be related to PHP accessing mysql and I'm getting suhosin warnings. Has anyone else seen this problem? Any ideas on how to fix it? Funnily enough, it's not a consistent error, as restarts tend to fix the issue temporarily.

  Read the article

• (OS 10055) Queue full

  - by Ali

  I'm using apache with mysql on the other server, apache on windows 2003 with 4gb ram 3 dual core CPU My server keep on running smoothly without any issue for about 3 days or roundabout 60+ hours however between 60-70 hours my apache stop working & log events shows this error, I tried to search a lot but helpless, I have already increased max port, please if someone can help ? (OS 10055)An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. : make_sock: unable to listen for connections on address 0.0.0.0:80

  Read the article

• How to control admission policy in vmware HA?

  - by John

  Simple question, I have 3 hosts running 4.1 Essentials Plus with vmware HA. I tried to create several virtual machines that filled 90% of each server's memory capacity. I know that vmware has really sophisticated memory management within virtual machines, but I do not understand how the vCenter can allow me even to power on the virtual machines that exceed the critical memory level, when the host failover can be still handled. Is it due to the fact that virtual machines does not use the memory, so that it is still considered as free, so virtual machines can be powered on ? But what would happen if all VMs would be really using the RAM before the host failure - they could not be migrated to other hosts after the failure. The default behaviour in XenServer is that, it automatically calculates the maximum memory level that can be used within the cluster so that the host failure is still protected. Vmware does the same thing ? The admission policy is enabled. Vmware HA enabled.

  Read the article

• Leightweight Linux distro to install on my old PC

  - by Juri

  Hi, I have an old PC at home which is mainly used by my Mom or my brother just to browse the web and maybe open some PDFs / docs. Till now I had Win2000 installed, but it performs very poorly. So I thought about installing Linux on it. Could someone give me some suggestions for a leightweight Linux distribution which works well?? Is standard Ubuntu too heavy?? PC details CPU: Athlon AMD ~1211 MHz RAM: 1GB Grafics Card: NVidia GeForce FX 5200 (not so relevant,but still) Thx for your suggestions.

  Read the article

• Is Ubuntu Netbook Remix actually lighter than Ubuntu Desktop?

  - by D Connors

  I'm running ubuntu on my work notebook. While it's not a netbook, it is a relatively weak machine. So, even though I'm not a big fan of the ubuntu netbook interface, I would be willing to use it if it's lighter (on RAM and CPU) than the desktop version. I know there are some very light linux distros available out there, but I'd like to stick with ubuntu both for it's community and for the support I have available here at my workplace. So, is Ubuntu Netbook Remix lighter on system resources than Ubuntu Desktop?

  Read the article

• Apache Prefork Configuration

  - by user1618606

  I'm newbie on VPS configuration. So, I've installed apache, php and mysql and now I need to know how to configure Prefork to optimize Apache. The system configuration is: CPU Cores 2 x 2 Ghz @ 4 Ghz RAM Memory 2304 MB DDR3 Burst Memory 3 GB DDR3 Disk Space 30 GB SSD Bandwidth 3 TB SwitchPort 1 Gbps Actually, after linux, mysql, apache and php, there are 250 MB memory in use. Well, I don't have idea to calculate. I saw in some websistes, some vars like: KeepAlive On KeepAliveTimeout 1 MaxKeepAliveRequests 100 StartServers 15 MinSpareServers 15 MaxSpareServers 15 MaxClients 20 MaxRequestsPerChild 0 or StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 How I could to do: Prefork or worker? Where and how the vars are placed? In httpd.conf?

  Read the article

• Apache Prefork Configuration

  - by user1618606

  I'm newbie on VPS configuration. So, I've installed apache, php and mysql and now I need to know how to configure Prefork to optimize Apache. The system configuration is: CPU Cores 2 x 2 Ghz @ 4 Ghz RAM Memory 2304 MB DDR3 Burst Memory 3 GB DDR3 Disk Space 30 GB SSD Bandwidth 3 TB SwitchPort 1 Gbps Actually, after linux, mysql, apache and php, there are 250 MB memory in use. Well, I don't have idea to calculate. I saw in some websistes, some vars like: KeepAlive On KeepAliveTimeout 1 MaxKeepAliveRequests 100 StartServers 15 MinSpareServers 15 MaxSpareServers 15 MaxClients 20 MaxRequestsPerChild 0 or StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 How I could to do: Prefork or worker? Where and how the vars are placed? In httpd.conf?

  Read the article

• Windows Server Configuration with Exchange, SQL Express and IIS

  - by Reafidy

  In our small office we are currently running a standalone tower server with WS 2008 R2, SQL Express and IIS. This server is going to be decommissioned and scrapped as its old and very noisy. We are going to purchase a new server with WS 2012 Standard and a heap of ram. It will still be a standalone server so it will be a domain controller, have SQL Express and IIS installed. We intend to install the hyper-v role and host a second virtual server to distribute the load. We are a small company and have only 15 staff members so its not a huge load on the server. Can a single server handle this type of installation, we don't want to purchase two servers. If so how should it be configured with regard to which software packages should be virtualized(if any). Redundancy is not a huge issue for us.

  Read the article

• mysql settings - using the available resources

  - by Christian Payne

  I've got a lot of processing work I need to run on a mysql server. I've installed mysql 5.1.45-community on a Win 2007 64bit. Its running on a xenon, 3ghz 6 processors with 8 gig ram. It doesn't seem to matter what queries I run (or the number I run at the same time), when I look in task manager, I'll see one processor is out at 100%. The other 5 are idol. Memory is static at 1.54 gig. When I installed mysql, I used the wizard and selected the default "server" (not workstation) option. I feel like I should be getting more bang for my buck. Is there something else I should be monitoring or something I should change to use the other system resources???

  Read the article

• FireFox/NoScript: why has the NoScript icon disappeared?

  - by Peter Mortensen

  Why has the appearence of NoScript changed? Using Noscript in FireFox (Microsoft Windows): Until now there has been an icon (the S icon) in the lower right of the screen. But now there is an button instead with the text "Options". Left clicking this button seems to bring up the menu as right clicking the old icon. Can I restore the previous state? Is there an auto-update function in NoScript and if so could it have caused the change? If it exists can the auto-update function be disabled? Platform: FireFox 3.0.6, NoScript 1.9.0.6, Windows XP 64 bit, 8 GB RAM.

  Read the article

• How can I exceed the 60% Memory Limit of IIS7

  - by evilknot

  Pardon if this is more stackoverflow vs. serverfault. It seems to be on the border. We have an application that caches a large amount of product data for an e-commerce application using ASP.NET caching. This is a dictionary object with 65K elements, and our calculations put the object's size at ~10GB. Problem: The amount of memory the object consumes seems to be far in excess of our 10GB calculation. BIGGEST CONCERN: We can't seem to use over 60% of the 32GB in the server. What we've tried so far: In machine.config/system.web (sf doesn't allow the tags, pardon the formatting): processModel autoConfig="true" memoryLimit="80" In web.config/system.web/caching/cache (sf doesn't allow the tags, pardon the formatting): privateBytesLimit = "20000000000" (and 0, the default of course) percentagePhysicalMemoryUsedLimit = "90" Environment: Windows 2008R2 x64 32GB RAM IIS7 Nothing seems to allow us to exceed the 60% value. See attached screenshot of taskman.

  Read the article

• Windows 7 Slowness following Virtual PC and Visual Studio Install

  - by Elliot Hughes

  I'm running Windows 7 32bit on a 3.2ghz Pentium D with 2gb RAM and a 1TB SATA hard drive. My system was running as fast as it ever has until I installed Visual Studio and Virtual PC a few days ago. Ever since - regardless of whether either application has been running the system has been running incredibly slowly. For example flash video plays jumpily, 3D games that used to run fine are now unplayable and even the smallest amount of multitasking makes the system unusable. I'm confident there is no virus or other such things present following scans in safemode and I'm fairly confident I've made no other changes to my system. Any ideas - I've run out of things to try!

  Read the article

• Cannot log on to a remote server using rdp from windows 7 machine when I am remotley connected to th

  - by Gary

  Bear withe me, here is my set up. I use my 27" iMac 3.06GHz Core 2 Duo 4GB Ram to connect to my work desktop running Windows 7. From there I can administer other remote servers. Here is the problem. Using the Remote Desktop Client on my Mac I can connect to my work machine no problem. But when I then use the work machine to open a remote desktop session with another Windows server (usually SBS 2003 but applies to all) I get the log in prompt, I enter the user name password ensure i'm connecting to the domain, but it wont log me in. The error message is the same, as though I had typed the wrong password (i know this is not the case). Does anyone have a solution? Thanks in advance. Gary

  Read the article

• Intermittent freeze of Windows 7 x64 on laptop

  - by georged

  I have Lenovo W500, 8GB RAM, 250GB Crucial SSD running Windows 7 x64 using boot-to-vhd. Lately I started to experience some random freezes for 5-30 seconds. And when I say "freeze" I mean it; it's like a time machine - no input taken, nothing is written anywhere, no log, no disk activity. And then suddenly machine would wake up and continue as if nothing happened. I do suspect that it's one of the drivers but I don't see any updates in the log lately except for .NET 4 framework and Adobe Reader. Out of new or updated software I can only recall Skype and IE9 but freezes started to occur definitely before IE install. Regular software includes but not limited to: Office 2010, VMWare Workstation, IE9, Chrome, Skype, Seesmic/TweeterDeck, Live Writer. How should I approach the "hunting season" to find our the culprit? Any tools or packages that could help me to identify the component, program, driver that causes the freeze? Cheers

  Read the article

• Wake network adapter from deep sleep mode

  - by BeatMe

  I recently buyed a new Mainboard (Asrock ALiveXFire) and got some trouble with the network adapter. After switching my Windows 7 x64 in energey saving mode and returning from it, my network adapter couldn't be found. After some googling I found out, that apparently my network adapter has been put in a deep sleep mode and didn't reactivate. Their solution was to switch the PC off, take out the RAM and the CMOS battery for some time. After that, the adapter should be powered on again, but that didn't happen for me. I waited several hours before turning my PC on again, but that didn't help. Formatting and reinstalling didn't help either. The network adapter is not found in the hardware manager and reinstalling the drivers didn't help. I have the newest BIOS installed on the mainboard. I literally don't know what to try next. I'm thinking of returning my board, but I would like to avoid the hassle.

  Read the article

• KVM CLI install for CentOS 6.3 defaults to Minimal Install

  - by i.h4d35

  So I now I've installed KVM (and its associated tools and packages- libvirt, VMM etc.). On the GUI (i.e using the VMM), installation works as its supposed to. However, when I try to create a VM using the command line interface, the OS (I am working with CentOS 6.3) defaults to a Minimal Install instead of giving me options to choose from at the time of installation. I am trying to install using the following command: virt-install \ --connect qemu:///system \ --virt-type kvm --name testVM2 \ --ram 512 --disk path=/var/lib/libvirt/images/testVM2.img,size=8 --vnc \ --cdrom /media/db18de8e-0853-49fb-80de-5c794d58a46f/CentOS-6.3- x86_64-bin-DVD1.iso \ --network network=default Specifying the OS-type or the OS-variant parameters doesn't make a difference. Is there something that I am missing out on or some other parameter that I must specify? Thanks in advance.

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >