Search Results

Search found 5290 results on 212 pages for 'refresh rate'.

Page 104/212 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Router's ssid changes from infrastructure to ad-hoc

  - by waldo

  For a period of time the router's ssid is shown (on various computers) as a normal infrastructure network - computers connect fine and everything works however after a few minutes / hours all computers see the same ssid as an ad-hoc network (not infrastructure). At this point a computer that was already connected continues to work - a computer that isn't cannot connect. Rebooting the router temporarily restores the visibility of the correct infrastructure ssid. Is something interfering? Connecting computers: macbook (2009), iphone 3g, windows vista desktop, windows xp desktop. Details: - D-Link DSL-2740B router set to WPA2-PSK (Personal) - Enable Wireless : Yes - Wireless Network Name (SSID) : ###### - Country : Australia - Wireless Channel : 1 - 802.11 Mode : Mixed 802.11n, 802.11g and 802.11b - Channel Width : Auto 20/40 MHz - Transmission Rate : Best (automatic) - Hide Wireless Network : No - Group Key Update Interval : 0 (seconds)

  Read the article

• Realtek HD Audio playing weird with certain video formats

  - by dyasny

  Hi, I have a Gigabyte motherboard with an onboard Realtek HD sound card. The card is working perfectly everywhere, except for a single video format, where the voice is distorted, sounds as if it's been passed through a metal tube. Been googling for this, but couldn't find an answer anywhere. The movie plays fine on other systems (got Linux everywhere else), but on this one (winXP-x64-sp2) it just doesn't. Here are some details: MPC: Type: KLCP WMV File Audio: 0x000a 22050Hz mono 20Kbps [Raw Audio 0] Video: Windows Media Video 9 400x300 29.97fps 227Kbps [Raw Video 1] VLC: Codec: wmas Sample rate: 22050 Bits per sample: 16 Bitrate: 20kb/s

  Read the article

• Server hard disk read speed and client download speed, is there a connection? [closed]

  - by Mywiki Witwiki

  Ok so a client's download speed is only as fast as a server's upload speed, and vice versa. Based on the answers to this post: Does upload speed depend upon download speed of the server? In other words, the data transfer rate between the two computers is only as fast as the speed of the "bottleneck". Let's pretend the two computers are in two different networks and both have 100Mbps internet connection. Ben wants a copy of a file in Mark's computer hard disk with 30Mbps read speed. Does this mean that Ben can download the file at a speed of around 30Mbps only, despite having an internet connection faster than 30Mbps?

  Read the article

• multiple file systems for mysql

  - by RainDoctor

  Does mysql support multiple file systems for a single database with most of the tables being on MyISAM? Context: we have a 1.5TB mysql database, which is increasing at the rate of 200GB per month. The storage is directly attached, whose slots are almost full. I can add another DAS, and increase the file system. But resizing volume, resizing file system, etc are getting messy. Is there a concept of "tablespace, datafile" (like in oracle) in MySql world? Or how you guys manage mysql db with these kind of constraints?

  Read the article

• VAIO as a Linux based netbook

  - by Noufal Ibrahim

  I'm planning to refresh my laptop. I've been using a thinkpad T42 for a long time and run Ubuntu on it. I'm planning to move to using a desktop for all my heavy work and getting a very light netbook style machine for mobile use. I need a decent keyboard, good battery life and a display that's bright and responsive. I'm evaluating a couple of laptops including a mac but have never come across information about a Sony Vaio. Do any of the people have experience with the laptop? What are your opinions? Does it work fine with Linux? Is it tinkerable (a big problem with the macbooks). How's the build quality, how's the service?

  Read the article

• Getting error 2048 at whatever I'm doing in Eclipse

  - by Bernhard V

  Hi, whatever I'm doing in Eclipse, I get an error. At start up I get an error at Java tooling initializing. I get an error when I want to open a type. And it's always the same error. For example, when opening a type I get: An internal error occurred during: "Cache refresh". 2048 The error at the start up also prints the error code as 2048. I'm using the most up to date version of Eclipse. Do you know a way to fix this issue?

  Read the article

• Tuning (and understanding) table_cache in mySQL

  - by jotango

  Hello, I ran the excellent MySQL performance tuning script and started to work through the suggestions. One I ran into was TABLE CACHE Current table_cache value = 4096 tables You have a total of 1073 tables. You have 3900 open tables. Current table_cache hit rate is 2%, while 95% of your table cache is in use. You should probably increase your table_cache I started to read up on the table_cache but found the MySQL documentation quite lacking. They do say to increase the table_cache, "if you have the memory". Unfortunately the table_cache variable is defined as "The number of open tables for all threads." How will the memory used by MySQL change, if I increase this variable? What is a good value, to set it to?

  Read the article

• Exploratory Question for Security Admins (/etc/passwd + PHP)

  - by JPerkSter

  Hi everyone, I've been seeing a few issues lately on a few of my servers where an account gets hacked via outdated scripts, and the hacker uploads a cPanel / FTP Brute forcing PHP script inside the account. The PHP File reads /etc/passwd to get the usernames, and than uses a passwd.txt file to try and brute force it's way in to 127.0.0.1:2082. I'm trying to think of a way to block this. It doesn't POST anything except "GET /path/phpfile.php", so I can't use mod_security to block this. I've been thinking of maybe changing permissions on /etc/passwd to 600, however I'm unsure how this will result in regards to my users. I was also thinking of rate-limiting localhost connections to :2082, however I'm worried about mod_proxy being affected. Any suggestions?

  Read the article

• Should a sysadmin contractor charge overtime for off-peak hours?

  - by Jakobud

  This is not necessarily a server-related question, but more of a system admin question that I think would related to many on SF. I'm doing Sysadmin/IT consulting for a small company. I only work about 3 days a week for them on average. If a server goes down or something like that during off hours (nights, weekends, 3am, etc) and they need it fixed during those time periods, should I be charging overtime for that? I would I not be justified in charging overtime until I've logged 40 hours for the week? Perhaps calling it overtime isn't the best name. I guess maybe its better to call it an off-peak hourly rate. Anyways I just was curious what other consultants did in these circumstances.

  Read the article

• What do the numbers 240 and 360 mean when downloading video? How can I tell which video is more compressed?

  - by DaMing

  I have downloaded some computer science lectures from YouTube recently. There is usually more than one choice of file size and file format to download. I noticed that for the same video, the downloadable one with FLV 240 extension is larger than another one with MPEG4 360 extension. What does the number (240 and 360) mean? And which file's compression rate is bigger? That is to say, which one removed much more file elements than the other from the orignal file?

  Read the article

• PSAD Firewall/ UDP flood?

  - by Asad Moeen

  Well I'm actually trying to block a UDP Flood on the Application port because the string "getstatus" is causing my application to make large output due to a small input to the attacker's IP. I installed PSAD firewall to do the job. psad -S shows 3000,000 logged packets at the application port and top ports in Scan but does not block the IP of the attacker however other IP Addresses with small number of connections are dropped. I'm thinking that since output is also being made to the attacker, this is why its not getting blocked because iptables rate-limiting is also exactly doing the same thing and not blocking the IP where outgoing connection is also made. Any guesses why it won't work?

  Read the article

• How can I share a video file during a webinar?

  - by Brien Malone

  Here is the scenario: I have a number of remote employees around the globe. I want to have a video chatting session. No problem there. Halfway through, I want to shut off all camera video feeds and simulcast (synchronous) a training video to my team. How do I do this? We have tried office communicator, but the frame rate was awful and no audio. Adobe Connect had similar trouble. In both cases we were limited by the main office's small internet pipe, but it is clear that video delivered by shared desktop is not a good solution.

  Read the article

• Is a larger hard drive with the same cache, rpm, and bus type faster?

  - by Joel Coehoorn

  I recently heard that, all else being equal, larger hard are faster than smaller. It has to do with more bits passing under the read head as the drive spins - since a large drive packs the bits more tightly, the same amount of spin/time presents more data to the read head. I had not heard this before, and was inclined to believe the the read heads expected bits at a specific rate and would instead stagger data, so that the two drives would be the same speed. I now find myself looking at purchasing one of two computer models for the school where I work. One model has an 80GB drive, the other a 400GB (for ~$13 more). The size of the drive is immaterial, since users will keep their files on a file server where they can be backed up. But if the 400GB drive will really deliver a performance boost to the hard drive, the extra money is probably worth it. Thoughts?

  Read the article

• Google chrome IETab login pages

  - by Jeff Storey

  Hi, I'm using Google Chrome and for certain sites I need to use IE. I've installed IE tab classic but I've noticed then when I have pages that require an active directory popup login that chrome will prompt me for the username/password and then send switch over to IE. IE will always show a message indicating that a connection to the page could not be made and I have to then press the "Refresh the page" link and then be prompted again for the username/password (this time inside IE) and then the the login will work. Does anyone know why this happens and how I can just login once? thanks, Jeff

  Read the article

• Under what circumstances can/will a 10BASE-T device slow down a 100BASE-T or faster network?

  - by Fred Hamilton

  Suppose I have a 10BASE-T device, but everything else on my network is 100BASE-T or faster. When I attach the 10Mbit device, one of two things could happen: It could be passed through as 10BASE-T, making whatever it's connected to slow down to 10BASE-T, or It could be converted to a higher speed. I'm looking for all the plausible examples where #1 could happen; where attaching this 10Mbit device will slow down other traffic. I sorta think it can't happen - that as soon as it comes into contact with other traffic it has to get retimed to be inserted into the higher rate traffic (so no slowdown aside from the extra bits from the connection), and that when it's not contacting other traffic, who cares if it's only 10Mbit? Basically I'd like a better understanding of any impact of inserting a slow device into a fast ethernet network.

  Read the article

• Virtualmin Configuration

  - by Allen

  I am trying to get Virtualmin setup and have reached a point where my noobish sysadmin skills aren't getting the job done. This is the message I get now when I try and refresh the configuration of Virtualmin. BIND DNS server is installed, and the system is configured to use it. However, the default master DNS server XXXXXX is not a fully qualified domain name. Sendmail is only accepting SMTP connections on the following ports : 127.0.0.1 port smtp. Email from other systems on the Internet will not be accepted. This can be changed in the Sendmail Mail Server module. Please advise what I need to do to get Sendmail configured properly. Thanks!

  Read the article

• Windows 7 Laptops "unable to find logon server"

  - by tombull89

  In the school I work in we have a large number (500+) of Windows 7 laptops on a Meru Wireless system and Server 2008 R2 Servers. We have an appalingly large failure rate where a student or staff member tries to logon (to the laptop joined to the domain) and is met by "There are currently no logon servers available to service the logon request". I've seen this question and this one and while removing and re-joining to the domain works, it's highly time consuming, irritating, and we (I) have more important things to concentrate on. The only MS KB article I can find is regarding a read-only domain controller (which ours isn't) and I'm at my wits end. Ultimately, is there a definitve cause and answer to this or am I stuck removing and re-joining the laptops?

  Read the article

• How to statically configure DNS servers on a Cisco router when the WAN interface uses DHCP?

  - by Massimo

  I have a Cisco router (model 887VA, IOS 15.4) used to connect a LAN to the Internet via ADSL. The WAN interface uses DHCP: interface ATM0.1 point-to-point ip address dhcp I need the router to use a statically-defined DNS server for name resolution: ip name-server A.B.C.D However, the router insists on using the DNS servers supplied by the ISP via DHCP: Router#ping www.google.com Translating "www.google.com"...domain server (<ISP DNS>) [OK] Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 173.194.116.208, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 44/45/48 ms How can I tell the router to ignore the ISP-supplied DNS servers and only use the statically-configured one?

  Read the article

• How can I limit the upload/download bandwidth on my CentOS server?

  - by Dan Nestor

  How can I limit the upload and download bandwidth on my CentOS server? This is a box with a single interface, eth0. Ideally, I would like a command-line solution (I've been trying to use tc), something that I could easily switch on and off in a script. So far I've been trying to do something like tc filter add dev eth0 protocol ip prio 50 u32 police rate 100kbit burst 10240 drop but I'm obviously missing a lot of knowledge and information. Can somebody help with a quick one-liner? Many thanks, Dan

  Read the article

• Sound entirely stopped working on Windows 8 on a Macbook Pro

  - by Kelvin Bongers

  I am currently running Windows 8 (downloaded from DreamSpark) on a Macbook Pro. This worked fine for a while but suddenly all audio stopped working. When I go to "Playback devices" and hit "Test" on the speakers I get treated with the following message: This also shows up right after I try restarting. I tried disallowing exclusive usage of the devices but it makes no difference. Edit: After some looking around I tried changing the sample rate and bit depth so I would get a dialog screen to force Windows to go around the program that's using it. I did get the dialog but then instead of changing it I got the following error: Edit 2: I narrowed it down to a single service failing to start, the Multimedia Class Scheduler service fails to start with the following error:

  Read the article

• FFMPEG Segfault Solutions

  - by Brentley_11

  I'm trying to convert a bunch of movies into h.264 mp4's using FFMPEG. These movies are sourced from various portable camcorders such as the Flip Mino HD and the Kodak ZI8. One issue I'm having with video from the ZI8 is it seems to be causing FFMPEG to segfault. Here is my command: ffmpeg -i 'XmasSailor720p60fps.MOV' -threads 2 -acodec libfaac -ab 96kb -vcodec libx264 -vpre hq -b 500kb -s 484x272 XmasSailor.mp4 Here is the output: FFmpeg version SVN-r20668, Copyright (c) 2000-2009 Fabrice Bellard, et al. built on Dec 2 2009 18:37:34 with gcc 4.2.4 (Ubuntu 4.2.4-1ubuntu4) configuration: --enable-libfaac --enable-libfaad --enable-libmp3lame --enable-libx264 --enable-gpl --enable-nonfree --enable-postproc --enable-pthreads --enable-shared libavutil 50. 5. 1 / 50. 5. 1 libavcodec 52.42. 0 / 52.42. 0 libavformat 52.39. 2 / 52.39. 2 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 2 / 0. 7. 2 libpostproc 51. 2. 0 / 51. 2. 0 Seems stream 0 codec frame rate differs from container frame rate: 59.94 (60000/1001) -> 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'XmasSailor720p60fps.MOV': Duration: 00:00:05.37, start: 0.000000, bitrate: 12021 kb/s Stream #0.0(eng): Video: h264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 11994 kb/s, 29.97 tbr, 90k tbn, 59.94 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 128 kb/s Metadata major_brand : qt minor_version : 0 compatible_brands: qt comment : KODAK Zi8 Pocket Video Camera comment-eng : KODAK Zi8 Pocket Video Camera [libx264 @ 0x99e1020]using SAR=1/1 [libx264 @ 0x99e1020]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64 [libx264 @ 0x99e1020]profile High, level 2.1 Output #0, mp4, to 'XmasSailor.mp4': Stream #0.0(eng): Video: libx264, yuv420p, 484x272 [PAR 1:1 DAR 121:68], q=10-51, 500 kb/s, 30k tbn, 29.97 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 96 kb/s Metadata comment : Encoded with the Statusfirm Video Transcoder Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 [h264 @ 0x99de950]B picture before any references, skipping [h264 @ 0x99de950]decode_slice_header error [h264 @ 0x99de950]no frame! Error while decoding stream #0.0 frame= 20 fps= 0 q=13797729.0 size= 0kB time=0.66 bitrate= 0.6kbits/s frame= 39 fps= 37 q=13797729.0 size= 0kB time=1.30 bitrate= 0.3kbits/s frame= 48 fps= 30 q=33.0 size= 11kB time=0.10 bitrate= 903.0kbits/s frame= 58 fps= 27 q=31.0 size= 22kB time=0.43 bitrate= 421.0kbits/s frame= 67 fps= 25 q=29.0 size= 41kB time=0.73 bitrate= 462.6kbits/s frame= 75 fps= 23 q=29.0 size= 59kB time=1.00 bitrate= 486.7kbits/s frame= 83 fps= 22 q=29.0 size= 81kB time=1.27 bitrate= 521.9kbits/s frame= 90 fps= 21 q=29.0 size= 97kB time=1.50 bitrate= 530.1kbits/s frame= 98 fps= 20 q=29.0 size= 114kB time=1.77 bitrate= 526.9kbits/s frame= 106 fps= 20 q=29.0 size= 134kB time=2.04 bitrate= 537.7kbits/s frame= 114 fps= 19 q=29.0 size= 150kB time=2.30 bitrate= 533.7kbits/s frame= 122 fps= 19 q=29.0 size= 172kB time=2.57 bitrate= 547.8kbits/s frame= 130 fps= 19 q=29.0 size= 193kB time=2.84 bitrate= 557.5kbits/s frame= 136 fps= 18 q=29.0 size= 211kB time=3.04 bitrate= 570.0kbits/s frame= 144 fps= 18 q=29.0 size= 242kB time=3.30 bitrate= 599.5kbits/s frame= 152 fps= 17 q=30.0 size= 261kB time=3.57 bitrate= 598.6kbits/s frame= 157 fps= 15 q=-1.0 Lsize= 368kB time=5.21 bitrate= 579.3kbits/s video:302kB audio:61kB global headers:0kB muxing overhead 1.416371% [libx264 @ 0x99e1020]frame I:1 Avg QP:27.22 size: 8720 [libx264 @ 0x99e1020]frame P:48 Avg QP:25.15 size: 3759 [libx264 @ 0x99e1020]frame B:108 Avg QP:30.10 size: 1105 [libx264 @ 0x99e1020]consecutive B-frames: 0.6% 11.5% 28.8% 59.0% [libx264 @ 0x99e1020]mb I I16..4: 28.5% 47.6% 23.9% [libx264 @ 0x99e1020]mb P I16..4: 0.8% 1.3% 0.5% P16..4: 50.6% 17.7% 13.1% 0.0% 0.0% skip:15.9% [libx264 @ 0x99e1020]mb B I16..4: 0.2% 0.3% 0.1% B16..8: 44.0% 1.2% 2.6% direct: 5.1% skip:46.5% L0:45.5% L1:51.0% BI: 3.5% [libx264 @ 0x99e1020]final ratefactor: 23.51 [libx264 @ 0x99e1020]8x8 transform intra:49.9% inter:67.9% [libx264 @ 0x99e1020]direct mvs spatial:98.1% temporal:1.9% [libx264 @ 0x99e1020]coded y,uvDC,uvAC intra: 54.7% 76.1% 41.4% inter: 17.1% 24.4% 7.8% [libx264 @ 0x99e1020]i16 v,h,dc,p: 18% 52% 5% 25% [libx264 @ 0x99e1020]i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 12% 22% 9% 7% 10% 10% 9% 8% 13% [libx264 @ 0x99e1020]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 13% 18% 8% 8% 10% 13% 10% 9% 12% [libx264 @ 0x99e1020]Weighted P-Frames: Y:10.4% [libx264 @ 0x99e1020]ref P L0: 60.2% 15.3% 11.0% 7.6% 5.2% 0.7% [libx264 @ 0x99e1020]ref B L0: 72.6% 15.6% 11.8% [libx264 @ 0x99e1020]kb/s:471.17 Segmentation fault I'm wondering if anyone else has ran into similar issues. I wasn't able to find anything helpful via Google. Another question I have is if anyone knows of a company that offers paid support for FFMPEG. Thank you for your time.

  Read the article

• How to make ssh/rsync/etc use a VLAN network interface?

  - by Annan

  A company I work for has a number of virtual servers with ElasticHosts. They are setup in such a way that eth1 is on a private VLAN connecting them to each other. This is so backups sent between servers are not charged at the same rate as external data transfer. My understanding of how VLANs and network interfaces work is sketchy at best. How can I make ssh, rsync, etc. transfer data through the VLAN? My final solution: I spent a while trying to figure this out, For all servers involved, edit /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static ONBOOT=yes HWADDR=YOUR_MAC_ADDR IPADDR=192.168.0.100 NETMASK=255.255.255.0 Where HWADDR should already be set and the last octate of IPADDR should be different from each other. Then run, on all servers /etc/init.d/network restart After this the IP addresses specified by IPADDR can be used directly as any other IP address.

  Read the article

• Samsung i780 networking problem

  - by Infinity

  Hello guys! Maybe this is not the right place to ask this, but I give a try for it. Please don't rate it down, just ignore it if you don't like. So I have a Samsung i780 mobile phone and I would like to use the internet through my wireless router. I have connected to it. I got an IP address. My laptop is also connected to the same wireless network and I can ping the mobile phone and I get answer. When I open the internet explorer and enter an address it says that it cannot connect to the internet. I have googled very much, but can't find the problem. What do you think, what is the solution?

  Read the article

• SCSI vs SATA? Is SCSI "actually" better?

  - by earlz

  Well, I was talking with a guy about servers the other day. I was a bit shocked whenever I asked him if there was any significant difference between SCSI and SATA and why he always uses SCSI. (note, I'm not sure if by SCSI he meant SAS) He told me that SCSI is always faster and that the drives are always more reliable.. I mean, this seems like a bold statement. He told me something about how SCSI will always be faster than SATA because the OS sends the SCSI (controller?) a request to get a file and it will build the file inside of the SCSI controller, instead of searching all over the disk.. which I do not understand how that would work, so I figure it is BS. SAS and SATA currently have equivalent data rate speeds.. Is there any true backing for his reasoning that SCSI is always faster and more reliable than SATA?

  Read the article

• VMware ESXi 4 On-Disk Data Deduplication - possible and supported?

  - by hurikhan77

  Environment: We are running multiple web, database, and application servers which usually share a pretty common installation (gentoo linux) and similar configuration in VMware ESXi 4. The differences are usually only some installed features or differing component versions. To create a new server, I usually choose the most similar (by features) running server, rsync a copy of it into freshly mounted filesystems, run grub, reconfigure and reboot. Problem: Over time this duplicates many on-disk data blocks which probably sums up to several 10's of gigabytes. I suppose if I could use a base system as template with the actual machines based on top of that, only writing changed blocks to some sort of "diff image", performance should improve (increased cache hit rate) and storage efficiency should increase (deduplicated storage space). This would be similar to what ESXi already supports for RAM deduplication (page sharing). Question: Is there any way to easily do this on ESXi 4? I already share the portage tree via NFS but this would not work for the rootfs.

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >