Search Results

Search found 11178 results on 448 pages for 'syntax checking'.

Page 104/448 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• What is the advantage of currying?

  - by Mad Scientist

  I just learned about currying, and while I think I understand the concept, I'm not seeing any big advantage in using it. As a trivial example I use a function that adds two values (written in ML). The version without currying would be fun add(x, y) = x + y and would be called as add(3, 5) while the curried version is fun add x y = x + y (* short for val add = fn x => fn y=> x + y *) and would be called as add 3 5 It seems to me to be just syntactic sugar that removes one set of parentheses from defining and calling the function. I've seen currying listed as one of the important features of a functional languages, and I'm a bit underwhelmed by it at the moment. The concept of creating a chain of functions that consume each a single parameter, instead of a function that takes a tuple seems rather complicated to use for a simple change of syntax. Is the slightly simpler syntax the only motivation for currying, or am I missing some other advantages that are not obvious in my very simple example? Is currying just syntactic sugar?

  Read the article

• Why do you hate Java? Is it the language or the framework? [closed]

  - by zneak

  According to you all, Java is the third most-hated language here. The two other most hated languages are PHP and VBScript. (It's quite funny how they stand together on the podium.) I'd like to make it known that the question mostly addresses people who don't like Java. I assume here a number of subjective opinions as facts because they're usually considered true among people who don't like Java, and I don't want to be convinced otherwise here. If you're a Java enthusiast, you might find this question frustrating. It's never been made clear if people hate Java itself, or if they hate it because of the framework, or if it's a mixture of the two. On a side you have the language, where you have: the "everything should be an object" philosophy, even in instances where it should obviously be something else (event handlers I'm pointing you); checked exceptions; the idea that all logic should be presented as methods and properties is a big no-no; the fact that "closures" created by anonymous types only include final variables and arguments, but will allow write access to any member of the parent class; a few more. On the other side, you have the JDK, with... its load of inconsistencies and overengineering; monolithic class hierarchies; meaningless base exceptions like IOException (though other frameworks have similar exception hierarchies); sluggish responsiveness even with Swing; a few more. My question is, do you think that, if either one (Java or the JDK) was taken alone, and the other was dropped in favor of something else, the new combination would be better? For instance, if you could use the C# syntax with the JDK (adapting get*/set* methods into properties, and interfaces with only one method into delegates), or the Java syntax with the .NET Framework (doing the inverse transformations), would things get better in your opinion?

  Read the article

• Spell check web pages using Firefox plugin

  - by Gopinath

  Having spelling mistakes on a website degrades customer experience by many times. Developers and website content creators spend good amount of time in going through the content manually to make sure that there are no spelling mistakes. At times few mistakes slip in as manual process is error prone. There are few web services and tool available in the market which provide automated spell checking services but they have certain limitations like – high fees to use the service, limitation on the number of pages they scan for errors, privacy issues, etc. What about a free tool that runs locally on your PC and spell checks unlimited web pages? Here comes Spell Checker extension for  Firefox web browser. This free Firefox extension is developed by  Gaurang, a Software Test Engineer based out in India. Once the extension is installed it adds a new context menu “Check Spelling” and a small icon to Add-On bar. To check spellings of a web page just click on the icon or the context menu and it will highlight all the errors on the page. By default SpellChecker extension uses US English dictionary to find spell mistakes and supports spell checking in other languages with installation of dictionaries. Download SpellChecker Extension for Firefox. Spell check dictionaries:  US-English , GB English and  Australian English

  Read the article

• Clientside anticheating in multiplayer game 1vs1

  - by garnav

  I'm developing a simple card game, where there will be a matchmaking system that will put you against another human player. This will be the only game mode available, a 1vs1 against another human, no AI. I want to prevent cheating as much as possible. I have already read a lot of similar questions here and I already know that I cannot trust the client and I have to make all verifications server side. I intend to have a server (need one for the matchmaking anyway) and I intend to make some verifications server side but if I want to check everything server side this makes my server to be able to keep track of the state of all current games and check every action, and I don't have the money/infrastructure to support that server. My idea is to make clients check and verify some of the actions made by their opponent* and if they find some illegal action notify the possible cheating to the server and make the server verify it. This will still require my server to keep track of all current games, but it will save resources only checking some things that cannot be checked at client side(like card order in the deck) and only checking other things when they are actually wrong. *(only those they can check with out allowing themselves cheating! for example:they can't check if the played card was in hand cos that will need them to know all cards in hand) Summing up, my questions are: is this a viable approach? will I actually save resources doing this or the extra complexity in the server and client for exchanging this messages is not worth it? do you know any game that has successfully or unsuccessfully tried a similar approach? Thanks all for reading and answering

  Read the article

• Duck checker in Python: does one exist?

  - by elliot42

  Python uses duck-typing, rather than static type checking. But many of the same concerns ultimately apply: does an object have the desired methods and attributes? Do those attributes have valid, in-range values? Whether you're writing constraints in code, or writing test cases, or validating user input, or just debugging, inevitably somewhere you'll need to verify that an object is still in a proper state--that it still "looks like a duck" and "quacks like a duck." In statically typed languages you can simply declare "int x", and anytime you create or mutate x, it will always be a valid int. It seems feasible to decorate a Python object to ensure that it is valid under certain constraints, and that every time that object is mutated it is still valid under those constraints. Ideally there would be a simple declarative syntax to express "hasattr length and length is non-negative" (not in those words. Not unlike Rails validators, but less human-language and more programming-language). You could think of this as ad-hoc interface/type system, or you could think of it as an ever-present object-level unit test. Does such a library exist to declare and validate constraint/duck-checking on Python-objects? Is this an unreasonable tool to want? :) (Thanks!) Contrived example: rectangle = {'length': 5, 'width': 10} # We live in a fictional universe where multiplication is super expensive. # Therefore any time we multiply, we need to cache the results. def area(rect): if 'area' in rect: return rect['area'] rect['area'] = rect['length'] * rect['width'] return rect['area'] print area(rectangle) rectangle['length'] = 15 print area(rectangle) # compare expected vs. actual output! # imagine the same thing with object attributes rather than dictionary keys.

  Read the article

• How do I fix my installation of ATI Catalyst Video Drivers in 12.04 LTS?

  - by Boris

  My graphic card is a Mobility Radeon HD 4200 Series. I tried these 2 answers from What is the correct way to install ATI Catalyst Video Drivers in 12.04 LTS? But unfortunately, it does not work for me: When running the amd script, I get this error message: $ sudo sh ./amd-driver-installer-12-4-x86.x86_64.run ... DKMS part of installation failed. Please refer to /usr/share/ati/fglrx-install.log for details When checking this log file, I get: Uninstalling any previously installed drivers. Creating symlink /var/lib/dkms/fglrx/8.961/source -> /usr/src/fglrx-8.961 DKMS: add completed. Kernel preparation unnecessary for this kernel. Skipping... Building module: cleaning build area.... cd /var/lib/dkms/fglrx/8.961/build; sh make.sh --nohints --uname_r=3.2.0-24-generic-pae --norootcheck......(bad exit status: 1) [Error] Kernel Module : Failed to build fglrx-8.961 with DKMS [Error] Kernel Module : Removing fglrx-8.961 from DKMS Deleting module version: 8.961 completely from the DKMS tree. Done. [Reboot] Kernel Module : update-initramfs When checking with fglrxinfo, I get: $ fglrxinfo X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 138 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13

  Read the article

• SQL – Difference Between INNER JOIN and JOIN

  - by Pinal Dave

  Here is the follow up question to my earlier question SQL – Difference between != and Operator <> used for NOT EQUAL TO Operation. There was a pretty good discussion about this subject earlier and lots of people participated with their opinion. Though the answer was very simple but the conversation was indeed delightful and was indeed very informative. In this blog post I have another following up question to all of you. What is the difference between INNER JOIN and JOIN? If you are working with database you will find developers use above both the kinds of the joins in their SQL Queries. Here is the quick example of the same. Query using INNER JOIN SELECT * FROM Table1 INNER JOIN  Table2 ON Table1.Col1 = Table2.Col1 Query using JOIN SELECT * FROM Table1 JOIN  Table2 ON Table1.Col1 = Table2.Col1 The question is what is the difference between above two syntax. Here is the answer – They are equal to each other. There is absolutely no difference between them. They are equal in performance as well as implementation. JOIN is actually shorter version of INNER JOIN. Personally I prefer to write INNER JOIN because it is much cleaner to read and it avoids any confusion if there is related to JOIN. For example if users had written INNER JOIN instead of JOIN there would have been no confusion in mind and hence there was no need to have original question. Here is the question back to you - Which one of the following syntax do you use when you are inner joining two tables – INNER JOIN or JOIN? and Why? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Joins, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• How to implement jquery and Mootools together ?

  - by Avi Kumar Manku

  I am developing a website in which I am implementing two slider for images gallery using one with jQuery and one with moottools. But there is problem in implementing these because when I use both together the jQuery slider doesn't works where mootools slider works. jQuery slider works in case where I remove mootools. What should I do to implement both sliders together? Any suggestions will be helpful. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Tresmode | Footwear &amp; Accessories</title> <script type="text/javascript" src="js/jquery-1.5.min.js"></script> <script src="js/jquery.easing.1.3.js" type="text/javascript"></script> <script src="js/jquery.slideviewer.1.2.js" type="text/javascript"></script> <!-- Syntax hl --> <script src="js/jquery.syntax.min.js" type="text/javascript" charset="utf-8"></script> <script type="text/javascript"> $(window).bind("load", function() { $("div#mygaltop").slideView({toolTip: true, ttOpacity: 0.5}); $("div#mygalone").slideView(); //if leaved blank performs the default kind of animation (easeInOutExpo, 750) $("div#mygaltwo").slideView({ easeFunc: "easeInOutBounce", easeTime: 2200, toolTip: true }); $("div#mygalthree").slideView({ easeFunc: "easeInOutSine", easeTime: 100, uiBefore: true, ttOpacity: 0.5, toolTip: true }); }); $(function(){ $.syntax({root: 'http://www.gcmingati.net/wordpress/wp-content/themes/giancarlo-mingati/js/jquery-syntax/'}); }); </script> <link href="css/style.css" rel="stylesheet" type="text/css" /> <link href="css/product.css" rel="stylesheet" type="text/css" /> <link href="css/scroll.css" rel="stylesheet" type="text/css" /> <!--[if lte IE 8]> <link href="css/ieonly.css" rel="stylesheet" type="text/css" /> <![endif]--> <script language="javascript" type="text/javascript" src="js/mootools-1.2-core.js"></script> <script language="javascript" type="text/javascript" src="js/mootools-1.2-more.js"></script> <script language="javascript" type="text/javascript" src="js/SlideItMoo.js"></script> <script language="javascript" type="text/javascript"> window.addEvent('domready', function(){ /* thumbnails example , links only */ new SlideItMoo({itemsVisible:5, // the number of thumbnails that are visible currentElement: 0, // the current element. starts from 0. If you want to start the display with a specific thumbnail, change this thumbsContainer: 'thumbs', elementScrolled: 'thumb_container', overallContainer: 'gallery_container'}); /* thumbnails example , div containers */ new SlideItMoo({itemsVisible:5, // the number of thumbnails that are visible currentElement: 0, // the current element. starts from 0. If you want to start the display with a specific thumbnail, change this thumbsContainer: 'thumbs2', elementScrolled: 'thumb_container2', overallContainer: 'gallery_container2'}); /* banner rotator example */ new SlideItMoo({itemsVisible:1, // the number of thumbnails that are visible showControls:0, // show the next-previous buttons autoSlide:2500, // insert interval in milliseconds currentElement: 0, // the current element. starts from 0. If you want to start the display with a specific thumbnail, change this transition: Fx.Transitions.Bounce.easeOut, thumbsContainer: 'banners', elementScrolled: 'banner_container', overallContainer: 'banners_container'}); }); </script> </head> <body> <div id="landing"> <!-- landing page menu --> <div id="landing_menu"> <ul> <li><a class="active" href="#">SPECIALS</a></li> <li><a href="#">SHOP MEN'S</a></li> <li class="none"><a class="none" href="#">SHOP WOMEN'S</a></li> </ul> </div> <!-- landing page menu --> <!-- loading container menu --> <div id="container_part"> <div id="big_image_slider"> <!-- <img src="images/briteloves.png" alt="Britelove" /> --> <div id="mygaltop" class="svw"> <ul> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/briteloves.png" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/1.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/2.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/3.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/4.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/5.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/6.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/7.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/8.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/9.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/10.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/11.jpg" /></li> <li><img alt="Tresmode | Footwear &amp; Accessories" src="images/12.jpg" /></li> </ul> </div> </div> <div class="new_style_banner"><img src="images/new_styles.png" alt="new style" /></div> <div class="new_style_banner"><img src="images/ford-super-models.png" alt="ford super models" /></div> </div> <!--- loading container menu --> <!-- footer scrool ---> <div id="footer_scroll"> <!--thumbnails slideshow begin--> <div id="gallery_container"> <div id="thumb_container"> <div id="thumbs"> <a href="gallery/full/DC080302018.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/1.jpg"/></a> <a href="gallery/full/DC080302028.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/2.jpg" /></a> <a href="gallery/full/DC080302030.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/3.jpg"/></a> <a href="gallery/full/DC080302018.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/4.jpg" /></a> <a href="gallery/full/DC080302028.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/5.jpg" /></a> <a href="gallery/full/DC080302030.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/6.jpg"/></a> <a href="gallery/full/DC080302018.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/1.jpg"/></a> <a href="gallery/full/DC080302028.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/2.jpg" /></a> <a href="gallery/full/DC080302030.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/7.jpg"/></a> <a href="gallery/full/DC080302018.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/8.jpg" /></a> <a href="gallery/full/DC080302028.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/9.jpg" /></a> <a href="gallery/full/DC080302030.jpg" rel="lightbox[galerie]" target="_blank"><img src="gallery/thumb/10.jpg"/></a> </div> </div> </div> <!--thumbnails slideshow end--> </div> <!-- foooter scrooll --> </div> <script type="text/javascript"> var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); </script> <script type="text/javascript"> var pageTracker = _gat._getTracker("UA-2064812-2"); pageTracker._initData(); pageTracker._trackPageview(); </script> </body> </html>

  Read the article

• Free NOSQL database for use with C# client [closed]

  - by Mitten

  I've never used NOSQL databases before, but so far it seems like the best data storage solution for my project. I am going to implement a datamining application. The data I would like to mine is thousands of documents which cannot be imported into datamining applications. To make to import easier and faster (than importing thousands of documents) I am planning to import these documents into a NOSQL database first and when import NOSQL database into datamining software. At the very least once I have all the data in NOSQL database I should be able to code simplest datamining logic myself. Am I correct that NOSQL databases allow to creates records of data, but they don't mandate all the records to adhere to the same data schema (same column names/types in a classic table oriended SQL databases)? I think for each document I would create a row/entry/object (not sure what is the correct term is in use in NOSQL world) which would be a string id, few (columns) with unstructured text data, and a dozens of columns mostly of datetime and integer types. From its name NOSQL does not support SQL query syntax, but it support locating the object(row/entry?) by its unique id. Does NOSQL support qyuering objects using property=value syntax? Unfortunately most of free NOSQL db only support Java/C++ clients, which free NOSQL db would you recommend for a C# programmer?

  Read the article

• Problems with mounting .ISO files

  - by user89599

  I'm using Precise, with GNOME. I've attempted to install some retro, multi-cd games (KOTOR1) via .ISO images and WINE, but I can't get the ISO's to mount correctly. First I tried GMountISO, which showed a read-only warning but worked - until I went to unmount. When the installation program asked for CD 2 I couldn't unmount from the /cdrom folder because neither GMountISO or umount from terminal could detect the mount. After a reboot, I changed to GISOMount (different somehow, I guess?), but when I attempt to mount the ISO I get an error window explaining the syntax of the mount command and, which is also what I get when I attempt to use mount from terminal. After checking /media from terminal on a lark I see the disc mounted there twice over, but umount won't recognize it, even when I specify the full path sudo umount /media/KOTOR_1.iso. It cleared up upon reboot. Can someone please assist? UPDATE :: Thanks for the quick response. What's weird, is the images are like stuck in limbo... I'll show you: sc@sc-HP-110-3700:/media$ ls cdrom KOTOR_1(0)(vcd) KOTOR_1(vcd) sc@sc-HP-110-3700:/media$ cd cdrom sc@sc-HP-110-3700:/media/cdrom$ ls sc@sc-HP-110-3700:/media/cdrom$ cd .. sc@sc-HP-110-3700:/media$ umount KOTOR_1(vcd) bash: syntax error near unexpected token `(' sc@sc-HP-110-3700:/media$ umount KOTOR_1.ISO umount: KOTOR_1.ISO is not mounted (according to mtab) sc@sc-HP-110-3700:/media$ sudo umount -a umount: /run/shm: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /run: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /dev: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) umount: /: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) sc@sc-HP-110-3700:/media$

  Read the article

• .wine-pipelight folder not present

  - by DaimyoKirby

  Following the instructions on the pipelight installation page, I installed pipelight on Ubuntu 14.04. However, upon opening firefox the .wine-pipelight folder isn't present in my home folder, and I get the following errors: [PIPELIGHT:LIN:unknown] attached to process. [PIPELIGHT:LIN:unknown] checking environment variable PIPELIGHT_SILVERLIGHT5_1_CONFIG. [PIPELIGHT:LIN:unknown] searching for config file pipelight-silverlight5.1. [PIPELIGHT:LIN:unknown] trying to load config file from '/home/alden/.config/pipelight-silverlight5.1'. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:427:checkSilverlightGraphicDriver(): error in execlp command - probably silverlightGraphicDriverCheck not found or missing execute permission. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:441:checkSilverlightGraphicDriver(): GPU driver check - Your driver is not in the whitelist, hardware acceleration disabled. [PIPELIGHT:LIN:silverlight5.1] using wine prefix directory /home/alden/.wine-pipelight. [PIPELIGHT:LIN:silverlight5.1] checking plugin installation - this might take some time. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:374:checkPluginInstallation(): error in execvp command - probably dependencyInstaller/sandbox not found or missing execute permission. [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:384:checkPluginInstallation(): Plugin installer did not run correctly (exitcode = 1). [PIPELIGHT:LIN:silverlight5.1] basicplugin.c:108:attach(): plugin not correctly installed - aborting. I've reinstalled quite a few times and ran through many of the common fixes offered on the pipelight Launchpad pages and here on AskUbunta and still it fails to run. Is there a reason why this folder isn't present, or why I'm getting these errors? Edit: Oddly enough, the .wine-pipelight folder is created wtih I open Nitro, although this still doesn't fix the issue.

  Read the article

• ubuntu apache2 start, stop, status, restart and reload commands fails

  - by Assil

  Hi, I am new to Ubuntu and I'm still trying to figure this OS out (for work it's brilliant, better than Windows). Before I wrote this question, I did my research via Google, this website and even in StackOverflow.com. Whatever error came up, I googled it but with no success on how to solve this. Back to the main point: I tried to install (lamp) apache2 with this guide (in German) and this one(in english). Then I got stuck at the start command (with which one is able to start the apache2 server), my first try to run the server was a success until i wrote sudo /etc/init.d/apache2 reload then it showed me an error: $ sudo /etc/init.d/apache2 reload * Starting web server apache2 Syntax error on line 1 of /etc/apache2/ports.conf: Invalid command 'oder', perhaps misspelled or defined by a module not included in the server configuration Action 'reload' failed. The Apache error log may have more information. [fail] I didn't even write the word "oder" so I closed the shell and opened it anew. It showed the same error. After that, I've done some research and found out that my file (index.html (which is in my /var/www folder)), which I access via the browser, when I type in http://localhost should show up and tell that it was a success. So I removed apache2 and installed it again but now the following errors appear: $ sudo /etc/init.d/apache2 start * Starting web server apache2 Syntax error on line 1 of /etc/apache2/ports.conf: Invalid command 'oder', perhaps misspelled or defined by a module not included in the server configuration Action 'start' failed. The Apache error log may have more information. [fail] And still, I didn't even write "oder" in the command. I appreciate every help I can get, further thanks and have a nice day.

  Read the article

• How should I unbind and delete OpenAL buffers?

  - by Joe Wreschnig

  I'm using OpenAL to play sounds. I'm trying to implement a fire-and-forget play function that takes a buffer ID and assigns it to a source from a pool I have previously allocated, and plays it. However, there is a problem with object lifetimes. In OpenGL, delete functions either automatically unbind things (e.g. textures), or automatically deletes the thing when it eventually is unbound (e.g. shaders) and so it's usually easy to manage deletion. However alDeleteBuffers instead simply fails with AL_INVALID_OPERATION if the buffer is still bound to a source. Is there an idiomatic way to "delete" OpenAL buffers that allows them to finish playing, and then automatically unbinds and really them? Do I need to tie buffer management more deeply into the source pool (e.g. deleting a buffer requires checking all the allocated sources also)? Similarly, is there an idiomatic way to unbind (but not delete) buffers when they are finished playing? It would be nice if, when I was looking for a free source, I only needed to see if a buffer was attached at all and not bother checking the source state. (I'm using C++, although approaches for C are also fine. Approaches assuming a GCd language and using finalizers are probably not applicable.)

  Read the article

• When i trid to install ubuntu 11.10 i get an error '"Windows Backend object has no attribute 'iso-path' - see log for details.'

  - by Raja

  I am trying to install Ubuntu 11.10 in windows XP, Everything went as before until the countdown clock reached zero, then I got "Windows Backend object has no attribute 'iso-path' - see log for details. It's done it three times now. (Formatting in between) The end of the log says 11-01 17:20 DEBUG TaskList: New task check_iso 11-01 17:20 DEBUG TaskList: ### Running check_iso... 11-01 17:20 DEBUG CommonBackend: Checking Y:\ubuntu\install\installation.iso 11-01 17:20 DEBUG Distro: checking Ubuntu ISO Y:\ubuntu\install\installation.iso 11-01 17:20 DEBUG Distro: wrong size: 8094031872 900000000 11-01 17:20 DEBUG TaskList: ### Finished check_iso 11-01 17:20 ERROR TaskList: 'WindowsBackend' object has no attribute 'iso_path' Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in call File "\lib\wubi\backends\common\backend.py", line 579, in get_iso File "\lib\wubi\backends\common\backend.py", line 565, in use_iso AttributeError: 'WindowsBackend' object has no attribute 'iso_path' 11-01 17:20 DEBUG TaskList: # Cancelling tasklist 11-01 17:20 DEBUG TaskList: # Finished tasklist 11-01 17:20 ERROR root: 'WindowsBackend' object has no attribute 'iso_path' Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 130, in select_task File "\lib\wubi\application.py", line 205, in run_cd_menu File "\lib\wubi\application.py", line 120, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in call File "\lib\wubi\backends\common\backend.py", line 579, in get_iso File "\lib\wubi\backends\common\backend.py", line 565, in use_iso AttributeError: 'WindowsBackend' object has no attribute 'iso_path'

  Read the article

• '"Windows Backend object has no attribute 'iso-path' - see log for details.' error when trying to install

  - by Raja

  I am trying to install Ubuntu 11.10 in windows XP, Everything went as before until the countdown clock reached zero, then I got "Windows Backend object has no attribute 'iso-path' - see log for details. It's done it three times now. (Formatting in between) The end of the log says ====== 11-01 17:20 DEBUG TaskList: New task check_iso 11-01 17:20 DEBUG TaskList: ### Running check_iso... 11-01 17:20 DEBUG CommonBackend: Checking Y:\ubuntu\install\installation.iso 11-01 17:20 DEBUG Distro: checking Ubuntu ISO Y:\ubuntu\install\installation.iso 11-01 17:20 DEBUG Distro: wrong size: 8094031872 > 900000000 11-01 17:20 DEBUG TaskList: ### Finished check_iso 11-01 17:20 ERROR TaskList: 'WindowsBackend' object has no attribute 'iso_path' Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 579, in get_iso File "\lib\wubi\backends\common\backend.py", line 565, in use_iso AttributeError: 'WindowsBackend' object has no attribute 'iso_path' 11-01 17:20 DEBUG TaskList: # Cancelling tasklist 11-01 17:20 DEBUG TaskList: # Finished tasklist 11-01 17:20 ERROR root: 'WindowsBackend' object has no attribute 'iso_path' Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 130, in select_task File "\lib\wubi\application.py", line 205, in run_cd_menu File "\lib\wubi\application.py", line 120, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 579, in get_iso File "\lib\wubi\backends\common\backend.py", line 565, in use_iso AttributeError: 'WindowsBackend' object has no attribute 'iso_path'

  Read the article

• Alternatives for the Snippet Compiler

  - by Marko Apfel

  It seems that the Snippet Compiler is not maintained anymore. So I need an alternative – also for getting syntax highlighting for code in publications. Preferable with the possibility to conserve this highlighting by copying selections to clipboard. Snippet Compiler does not allows this for selections – only by exporting the whole file content to clipboard with HTML- or RTF-formatting (File > Export > HTML to clipboard respectively RTF to clipboard). Today I switched to LINQPad. This application offers constructing LINQ-statements as well as compiling arbitrary code snippets. But there are some other alternatives too: CS-Script - The C# Script Engine CS-Script is a CLR (Common Language Runtime) based scripting system which uses ECMA-compliant C# as a programming language. CS-Script currently targets Microsoft implementation of CLR (.NET 2.0/3.0/3.5. sharpsnippetcompiler C# Snippet Compiler is a tiny IDE to create, debug and run your C# programs CsharpRepl C# interactive shell that is part of Mono's C# compiler. An interactive shell is usually referred to as a read eval print loop or repl. The C# interactive shell is built on top of the Mono.CSharp library, a library that provides a C# compiler service that can be used to evaluate expressions and statements on the flight. What I miss is an alternative with syntax highlighting like in my Visual Studio: Instead of:

  Read the article

• I have 5 days of vouchers for MS training… help me choose? [closed]

  - by Shyatic

  I'm a Microsoft centric guy (systems engineering side) and I already know the syntax of VB, have done VBScript pretty extensively and Excel VBA stuff as well. I want to make the leap into proper programming, probably with C# because it teaches me syntax I can use for Java if I want to go that route at some point. Since I have vouchers for 5 days of programming, and I can understand logic and understand how the .NET framework works... I would love to hear ideas on which MS Courses I should take. My primary focus is to work on web applications with web services that interact and do neat stuff... like for example, to create a 'chat' room or something interactive on the web. Or should I do something with HTML5/JS? I am really not sure... like I said, I want to work to make web services/sites. Not making the next Facebook mind you, but I'd like to work towards something in that spectrum on a much smaller scale. Please give me any advice, I'd like to book these classes asap Obviously getting involved with SQL and things that I will require would be important here.. you guys know better than me! Thanks!

  Read the article

• Can't ssh to instance

  - by megas

  I have a linode instance, I was successfully connecting to it via ssh. But I've decided to rebuild my instance and then I can not connect to that instance via ssh. The linode works correctly because I can get access via Lish (lonode ssh) I've tried to clear known_hosts with: ssh-keygen -R 212.71.xxx.xx But I still getting message: ssh [email protected] -v OpenSSH_5.9p1 Debian-5ubuntu1.1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to 212.71.238.74 [212.71.238.74] port 22. debug1: Connection established. debug1: identity file /home/megas/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/megas/.ssh/id_rsa-cert type -1 debug1: identity file /home/megas/.ssh/id_dsa type -1 debug1: identity file /home/megas/.ssh/id_dsa-cert type -1 debug1: identity file /home/megas/.ssh/id_ecdsa type -1 debug1: identity file /home/megas/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1.1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1.1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA c5:c3:a7:c0:5a:25:a1:64:c4:04:0c:42:bb:46:f6:96 debug1: Host '212.71.238.74' is known and matches the ECDSA host key. debug1: Found key in /home/megas/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/megas/.ssh/id_rsa debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/megas/.ssh/id_dsa debug1: Trying private key: /home/megas/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey,password). How to resolve this problem? Thanks

  Read the article

• Upgrade 10.04LTS to 10.10 problem

  - by Gopal

  Checking for a new ubuntu release Done Upgrade tool signature Done Upgrade tools Done downloading extracting 'maverick.tar.gz' authenticate 'maverick.tar.gz' against 'maverick.tar.gz.gpg' tar: Removing leading `/' from member names Reading cache Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Updating repository information WARNING: Failed to read mirror file A fatal error occurred Please report this as a bug and include the files /var/log/dist-upgrade/main.log and /var/log/dist-upgrade/apt.log in your report. The upgrade has aborted. Your original sources.list was saved in /etc/apt/sources.list.distUpgrade. Traceback (most recent call last): File "/tmp/tmpe_xVWd/maverick", line 7, in <module> sys.exit(main()) File "/tmp/tmpe_xVWd/DistUpgradeMain.py", line 158, in main if app.run(): File "/tmp/tmpe_xVWd/DistUpgradeController.py", line 1616, in run return self.fullUpgrade() File "/tmp/tmpe_xVWd/DistUpgradeController.py", line 1534, in fullUpgrade if not self.updateSourcesList(): File "/tmp/tmpe_xVWd/DistUpgradeController.py", line 664, in updateSourcesList if not self.rewriteSourcesList(mirror_check=True): File "/tmp/tmpe_xVWd/DistUpgradeController.py", line 486, in rewriteSourcesList distro.get_sources(self.sources) File "/tmp/tmpe_xVWd/distro.py", line 103, in get_sources source.template.official == True and AttributeError: 'Template' object has no attribute 'official' This is what i got when i tried to upgrade the desktop edition:sudo do-release-upgrade. One more info: I have kde installed.

  Read the article

• PHP 5.4 Support: Minor Features

  - by Ondrej Brejla

  Hi all! This weak is another PHP weak. Asking why? PHP migrates to Git and GitHub! Isn't that cool? And this week is also NetBeans for PHP week, because we have some new NetBeans 7.2 features for you. Note: All PHP 5.4 features are available in your projects after setting Project Properties -> Sources -> PHP Version to PHP 5.4 value, or after choosing the same value during a PHP Project creation (in New Project Wizard). Callable type hint Let's start with a new PHP 5.4 type hint - callable. It's now in code completion and you can use it in your function declarations! Binary notation for integers The next feature is about recognizing of a new binary notation for integers, so you can use it without any problem - no syntax error will occur. Class::{expr}() And the last feature is about using of Class::{expr}() invocation. It's supported by our parser too, so no syntax errors will occur either. That's all for today and as usual, please test it and if you find something strange, don't hesitate to file a new issue (component php, subcomponent Editor). Thanks.

  Read the article

• Run database checks but omit large tables or filegroups - New option in Ola Hallengren's Scripts

  - by Greg Low

  One of the things I've always wanted in DBCC CHECKDB is the option to omit particular tables from the check. The situation that I often see is that companies with large databases often have only one or two very large tables. They want to run a DBCC CHECKDB on the database to check everything except those couple of tables due to time constraints. I posted a request on the Connect site about time some time ago: https://connect.microsoft.com/SQLServer/feedback/details/611164/dbcc-checkdb-omit-tables-option The workaround from the product team was that you could script out the checks that you did want to carry out, rather than omitting the ones that you didn't. I didn't overly like this as a workaround as clients often had a very large number of objects that they did want to check and only one or two that they didn't. I've always been impressed with the work that our buddy Ola Hallengren has done on his maintenance scripts. He pinged me recently about my old Connect item and said he was going to implement something similar. The good news is that it's available now. Here are some examples he provided of the newly-supported syntax: EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKDB' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKALLOC,CHECKTABLE,CHECKCATALOG', @Objects = 'AdventureWorks.Person.Address' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKALLOC,CHECKTABLE,CHECKCATALOG', @Objects = 'ALL_OBJECTS,-AdventureWorks.Person.Address' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKFILEGROUP,CHECKCATALOG', @FileGroups = 'AdventureWorks.PRIMARY' EXECUTE dbo.DatabaseIntegrityCheck @Databases = 'AdventureWorks', @CheckCommands = 'CHECKFILEGROUP,CHECKCATALOG', @FileGroups = 'ALL_FILEGROUPS,-AdventureWorks.PRIMARY' Note the syntax to omit an object from the list of objects and the option to omit one filegroup. Nice! Thanks Ola! You'll find details here: http://ola.hallengren.com/  

  Read the article

• Switch vs Polymorphism when dealing with model and view

  - by Raphael Oliveira

  I can't figure out a better solution to my problem. I have a view controller that presents a list of elements. Those elements are models that can be an instance of B, C, D, etc and inherit from A. So in that view controller, each item should go to a different screen of the application and pass some data when the user select one of them. The two alternatives that comes to my mind are (please ignore the syntax, it is not a specific language) 1) switch (I know that sucks) //inside the view controller void onClickItem(int index) { A a = items.get(index); switch(a.type) { case b: B b = (B)a; go to screen X; x.v1 = b.v1; // fill X with b data x.v2 = b.v2; case c: go to screen Y; etc... } } 2) polymorphism //inside the view controller void onClickItem(int index) { A a = items.get(index); Screen s = new (a.getDestinationScreen()); //ignore the syntax s.v1 = a.v1; // fill s with information about A s.v2 = a.v2; show(s); } //inside B Class getDestinationScreen(void) { return Class(X); } //inside C Class getDestinationScreen(void) { return Class(Y); } My problem with solution 2 is that since B, C, D, etc are models, they shouldn't know about view related stuff. Or should they in that case?

  Read the article

• External table and preprocessor for loading LOBs

  - by David Allan

  I was using the COLUMN TRANSFORMS syntax to load LOBs into Oracle using the Oracle external which is a handy way of doing several stuff - from loading LOBs from the filesystem to having constants as fields. In OWB you can use unbound external tables to define an external table using your own arbitrary access parameters - I blogged a while back on this for doing preprocessing before it was added into OWB 11gR2. For loading LOBs using the COLUMN TRANSFORMS syntax have a read through this post on loading CLOB, BLOB or any LOB, the files to load can be specified as a field that is a filename field, the content of this file will be the LOB data. So using the example from the linked post, you can define the columns; Then define the access parameters - if you go the unbound external table route you can can put whatever you want in here (your external table get out of jail free card); This will let you read the LOB files fromn the filesystem and use the external table in a mapping. Pushing the envelope a little further I then thought about marrying together the preprocessor with the COLUMN TRANSFORMS, this would have let me have a shell script for example as the preprocessor which listed the contents of a directory and let me read the files as LOBs via an external table. Unfortunately that doesn't quote work - there is now a bug/enhancement logged, so one day maybe. So I'm afraid my blog title was a little bit of a teaser....

  Read the article

• PHP ORM style of querying

  - by Petah

  Ok so I have made an ORM library for PHP. It uses syntax like so: *(assume that $business_locations is an array)* Business::type(Business:TYPE_AUTOMOTIVE)-> size(Business::SIZE_SMALL)-> left_join(BusinessOwner::table(), BusinessOwner::business_id(), SQL::OP_EQUALS, Business::id())-> left_join(Owner::table(), SQL::OP_EQUALS, Owner::id(), BusinessOwner::owner_id())-> where(Business::location_id(), SQL::in($business_locations))-> group_by(Business::id())-> select(SQL::count(BusinessOwner::id()); Which can also be represented as: $query = new Business(); $query->set_type(Business:TYPE_AUTOMOTIVE); $query->set_size(Business::SIZE_SMALL); $query->left_join(BusinessOwner::table(), BusinessOwner::business_id(), SQL::OP_EQUALS, $query->id()); $query->left_join(Owner::table(), SQL::OP_EQUALS, Owner::id(), BusinessOwner::owner_id()); $query->where(Business::location_id(), SQL::in($business_locations)); $query->group_by(Business::id()); $query->select(SQL::count(BusinessOwner::id()); This would produce a query like: SELECT COUNT(`business_owners`.`id`) FROM `businesses` LEFT JOIN `business_owners` ON `business_owners`.`business_id` = `businesses`.`id` LEFT JOIN `owners` ON `owners`.`id` = `business_owners`.`owner_id` WHERE `businesses`.`type` = 'automotive' AND `businesses`.`size` = 'small' AND `businesses`.`location_id` IN ( 1, 2, 3, 4 ) GROUP BY `businesses`.`id` Please keep in mind that the syntax might not be prefectly correct (I only wrote this off the top of my head) Any way, what do you think of this style of querying? Is the first method or second better/clearer/cleaner/etc? What would you do to improve it?

  Read the article

• Got that Friday feeling?

  - by Rebecca Amos

  Saturday is just around the corner, and we’re all starting to wrap up for the weekend. If you’re the DBA that ‘Friday feeling’ might be as much about checking and preparing your SQL Servers for the next two days, as about looking forward to spending time with friends and family. Whether you’re double-checking your disaster recovery strategy, or know that it’s your turn to be on-call this weekend, it’s likely you’re preparing for the worst, just in case. The fact that you’re making these checks, and caring about both your servers and your users, means that you might be an exceptional DBA. You’re already putting in that extra effort to make other people’s lives easier. So why not take some time for your professional development and enter the Exceptional DBA Awards? If you’re looking for some inspiration for your entry, download our Judges’ Top Tips poster for advice on what the judges are looking for from this year’s entrants. Not only will you be boosting your professional development, but you could win full conference registration for the 2011 PASS Summit in Seattle (where the awards ceremony will take place), four nights' hotel accommodation, and a copy of Red Gate’s SQL DBA Bundle. So take some time out for yourself this weekend and get started on your entry: www.exceptionaldba.com

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >