Search Results

Search found 3008 results on 121 pages for 'tech writer'.

Page 104/121 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

  • Linux RAID-0 performance doesn't scale up over 1 GB/s

    - by wazoox
    I have trouble getting the max throughput out of my setup. The hardware is as follow : dual Quad-Core AMD Opteron(tm) Processor 2376 16 GB DDR2 ECC RAM dual Adaptec 52245 RAID controllers 48 1 TB SATA drives set up as 2 RAID-6 arrays (256KB stripe) + spares. Software : Plain vanilla 2.6.32.25 kernel, compiled for AMD-64, optimized for NUMA; Debian Lenny userland. benchmarks run : disktest, bonnie++, dd, etc. All give the same results. No discrepancy here. io scheduler used : noop. Yeah, no trick here. Up until now I basically assumed that striping (RAID 0) several physical devices should augment performance roughly linearly. However this is not the case here : each RAID array achieves about 780 MB/s write, sustained, and 1 GB/s read, sustained. writing to both RAID arrays simultaneously with two different processes gives 750 + 750 MB/s, and reading from both gives 1 + 1 GB/s. however when I stripe both arrays together, using either mdadm or lvm, the performance is about 850 MB/s writing and 1.4 GB/s reading. at least 30% less than expected! running two parallel writer or reader processes against the striped arrays doesn't enhance the figures, in fact it degrades performance even further. So what's happening here? Basically I ruled out bus or memory contention, because when I run dd on both drives simultaneously, aggregate write speed actually reach 1.5 GB/s and reading speed tops 2 GB/s. So it's not the PCIe bus. I suppose it's not the RAM. It's not the filesystem, because I get exactly the same numbers benchmarking against the raw device or using XFS. And I also get exactly the same performance using either LVM striping and md striping. What's wrong? What's preventing a process from going up to the max possible throughput? Is Linux striping defective? What other tests could I run?

    Read the article

  • DVD Drive Failing on Windows 7

    - by Seth Spearman
    Hello, I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

    Read the article

  • DVD Drive Failing on Windows 7

    - by Seth Spearman
    I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

    Read the article

  • Why is my new Phenom II 965 BE not significantly faster than my old Athlon 64 X2 4600+?

    - by Software Monkey
    I recently rebuilt my 5 year old computer. I upgraded all core components, in particular from an Athlon 64 X2 4600+ at 2.4 GHz with DDR2 800 to a Phenom II 965 BE (quad core) at 3.6 GHz with DDR3 1333 (actually 1600, but testing consistently detected memory errors at 1600). The motherboard is also much newer and better. The HDD's (x3), DVD writer and card reader are the same. The BIOS memory config is auto-everything except the base timing which I overrode to 1T instead of 2T. The BIOS CPU multiplier is slightly over-clocked to 3.6 GHz from the stock 3.4 GHz. I noticed compiling Java is slower than I expected. As it happens I have some (single-threaded) Java pattern-matching code which is CPU and memory bound and for which I have performance numbers recorded on a number of hardware platforms, including my old system. So I did a test run on the new equipment and was stunned to find that the numbers are only slightly better than my old system, about 25%. The data set it is operating on is a 148,975 character array, which should easily fit in caches, but in any event the new CPU has larger caches all around. The system was, of course, otherwise idle for the test and the test run is a timed 10 seconds to eliminate scheduling anomalies. A long while ago, when I upgraded only memory from DD2 667 to DDR2 800 there was no change in performance of this test, which subjectively supports that the test cycle does not need to (significantly) access main memory, but yes it is creating and garbage collecting a large number of objects in the process of this test (low millions of matches are found for the pattern set). I am about 99.999% certain the code hasn't changed since I last ran it on 2009-03-17 - but I can't easily retest the old hardware, because it is currently in pieces on my work-bench waiting to be built into a new computer for my kids. Note that Windows (XP) reports a CPU speed of 795 MHz unless I have some thing running. With stuff running it seems to jump all over the place each time I use ALT-Pause to display the system properties, everywhere from 795 MHz to 3.4 Ghz. So why might my shiny new hardware under-performing so badly? EDIT: The old memory was Mushkin DDR2 800 with timings set for auto which should have been 5-5-5-12. The new memory is Corsair DDR3 1600, running at 1333 with timings also auto which are 9-9-9-21. In both cases they are a paired set of dual channel DIMMs. I was waiting to ensure my system was stable before tweaking with memory timings.

    Read the article

  • Why MySQL sat for 2 minutes doing nothing?

    - by Alex R
    This was a one-time thing, not reproducible... But I saved the show innodb status output. Can anybody tell what's going on here? The simple insert took almost 3 minutes to complete. | InnoDB | | ===================================== 110201 15:58:10 INNODB MONITOR OUTPUT ===================================== Per second averages calculated from the last 34 seconds ---------- SEMAPHORES ---------- OS WAIT ARRAY INFO: reservation count 11963, signal count 11766 --Thread 1824 has waited at .\btr\btr0cur.c line 443 for 118.00 seconds the sema phore: S-lock on RW-latch at 09D6453C created in file .\buf\buf0buf.c line 550 a writer (thread id 1824) has reserved it in mode wait exclusive number of readers 1, waiters flag 1 Last time read locked in file .\buf\buf0flu.c line 599 Last time write locked in file .\btr\btr0cur.c line 443 Mutex spin waits 0, rounds 527817, OS waits 7133 RW-shared spins 2532, OS waits 1226; RW-excl spins 1652, OS waits 1118 ------------ TRANSACTIONS ------------ Trx id counter 0 95830 Purge done for trx's n:o < 0 95814 undo n:o < 0 0 History list length 11 LIST OF TRANSACTIONS FOR EACH SESSION: ---TRANSACTION 0 0, not started, OS thread id 3704 MySQL thread id 551, query id 2702112 localhost 127.0.0.1 root show innodb status ---TRANSACTION 0 95829, not started, OS thread id 3132 MySQL thread id 534, query id 2702020 localhost 127.0.0.1 root ---TRANSACTION 0 95828, not started, OS thread id 3152 MySQL thread id 527, query id 2701973 localhost 127.0.0.1 root ---TRANSACTION 0 95827, ACTIVE 118 sec, OS thread id 1824 inserting, thread decl ared inside InnoDB 500 mysql tables in use 1, locked 1 1 lock struct(s), heap size 320, 0 row lock(s) MySQL thread id 526, query id 2701972 localhost 127.0.0.1 root update INSERT INTO log_searchcriteria (userid,search_criteria,date,search_type) VALUES ( NAME_CONST('userid',NULL), NAME_CONST('search_criteria',_latin1' SELECT SQL_C ALC_FOUND_ROWS idx_search.CTCX_LATITUDE, idx_search.CTCX_LONGITUDE, idx_search.b uilding_id, idx_search.LN_LIST_NUMBER, idx_search.LP_LIST_PRICE, idx_search.HSN_ ADRESS_HOUSE_NUMBER, idx_search.STR_ADDRESS_STREET, idx_search.CP_ADDRESS_COMPAS S_POINT, idx_search.UN_UNIT, idx_search.CIT_CITY, idx_search.ZP_ZIP_CODE, idx_se arch.AR_AREA_NAME, idx_search.BR_BEDROOMS, idx_search.BTH_BATHS, idx_search.ST_S TATUS, idx_search.CTCX_STYLE_TYPE, idx_s -------- FILE I/O -------- I/O thread 0 state: wait Windows aio (insert buffer thread) I/O thread 1 state: wait Windows aio (log thread) I/O thread 2 state: wait Windows aio (read thread) I/O thread 3 state: wait Windows aio (write thread) Pending normal aio reads: 0, aio writes: 1, ibuf aio reads: 0, log i/o's: 0, sync i/o's: 0 Pending flushes (fsync) log: 0; buffer pool: 0 151006 OS file reads, 120758 OS file writes, 6844 OS fsyncs 0.00 reads/s, 0 avg bytes/read, 0.00 writes/s, 0.00 fsyncs/s ------------------------------------- INSERT BUFFER AND ADAPTIVE HASH INDEX ------------------------------------- Ibuf: size 1, free list len 5, seg size 7, 24664 inserts, 24664 merged recs, 4612 merges Hash table size 553253, node heap has 629 buffer(s) 0.00 hash searches/s, 0.00 non-hash searches/s --- LOG --- Log sequence number 5 2318193115 Log flushed up to 5 2318193115 Last checkpoint at 5 2318129891 0 pending log writes, 0 pending chkp writes 3036 log i/o's done, 0.00 log i/o's/second ---------------------- BUFFER POOL AND MEMORY ---------------------- Total memory allocated 213459462; in additional pool allocated 1720192 Dictionary memory allocated 240416 Buffer pool size 8192 Free buffers 0 Database pages 7563 Modified db pages 18 Pending reads 0 Pending writes: LRU 0, flush list 18, single page 0 Pages read 150973, created 28788, written 115137 0.00 reads/s, 0.00 creates/s, 0.00 writes/s No buffer pool page gets since the last printout -------------- ROW OPERATIONS -------------- 1 queries inside InnoDB, 0 queries in queue 1 read views open inside InnoDB Main thread id 2992, state: flushing buffer pool pages Number of rows inserted 794294, updated 89203, deleted 13698, read 1453084305 0.00 inserts/s, 0.00 updates/s, 0.00 deletes/s, 0.00 reads/s ---------------------------- END OF INNODB MONITOR OUTPUT ============================ Thanks

    Read the article

  • Why is the server performance so poor? What can be done to improve the speed of the server?

    - by fslsyed
    Very slow processing using Windows Server2008 R2 Standard with Service Pack One. Situation: Read a text file using the text data to populate a series of MS Sql tables. The converted data is used to generate monthly PDF invoice files; the PDF files are saved directly to the hard drive. The application is multi-threading with one thread used for the text conversion and three threads for PDF invoice generation. The text conversion is occurring concurrently with the invoice generation. Application Software: C# using Microsoft Visual Studio 2010 Ultimate. Crystal Report Writer 2011 with runtime 13_0_3 64 bit version. Targeted platform is x64; also tested as x86, and Any CPU with similar results. Microsoft .NET Framework 4.0. Microsoft Sql 2008 Issue: The software is running very slowly. The conversion of the text file is approximately six hundred fifty records per second and generation of the PDF files is approximately twelve invoices per minute. The text file to be converted is six hundred Meg with seven thousand invoices to be generated. The software was installed on three different machines from the same distribution files. The same text file was converted on each machine. The user executing the application was an administrator on each machine. The only variances were the machine and operating system. The configurations are as follows: Server: Operating System: Windows Server2008 R2 Standard 64-bit (6.1, Build7601) SP1 Service Pack: System Manufacturer: IBM System Model: System x3550 M3-[7944AC1]- BIOS: Default System BIOS Processor: Intel® Xeon® CPU E5620@ 2.4GHz (16 CPUs) Memory: 16384MB Notebook: Operating System: Windows 7 Home Premium Standard 64-bit (6.1, Build7601) System Manufacturer: Hewlett-Packard System Model: HP Pavilion dv7 Notebook PC BIOS: Default System BIOS Processor: AMD Phenom II N640 Dual-Core Processor 2.9GHz (2 CPUs) Memory: 6144MB Desktop: Operating System: Windows 7 Professional 64-bit (6.1, Build7601) SP1 System Manufacturer: Dell Inc. System Model: OptiPlex 960 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A11 Processor: Intel Core™2 Quad CPU Q9650 @3.00GHZ (4 CPUs) Memory: 16384MB Processing results per machine: The applications were executed seven times with the averages being displayed below. Machine Text Records Invoices Generated Converted Per Minute Per Minute Server (1) 650 12 Notebook 980 17 Desktop 2,100 45 (1) The server is dedicated to execution of this application; no additional applications are being executed. Question: Why is the server performance so poor? What can be done to improve the speed of the server?

    Read the article

  • Exchange IMAP4 connector - Error Event ID 2006

    - by MikeB
    Hi, A couple of users in my organisation use IMAP4 to connect to Exchange 2007 (Update rollup 9 applied) because they prefer Thunderbird / Postbox clients. One of the users is generating errors in the Application Log as follows: An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 1523, user "*******", folder *********, subject: "******", date: "*******" into MIME format. Microsoft.Exchange.Data.Storage.ConversionFailedException: Message content has become corrupted. ---> System.ArgumentException: Value should be a valid content type in the form 'token/token' Parameter name: value at Microsoft.Exchange.Data.Mime.ContentTypeHeader.set_Value(String value) at Microsoft.Exchange.Data.Storage.MimeStreamWriter.WriteHeader(HeaderId type, String data) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeStreamAttachment(StreamAttachmentBase attachment, MimeFlags flags) --- End of inner exception stack trace --- at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeStreamAttachment(StreamAttachmentBase attachment, MimeFlags flags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeAttachment(MimePartInfo part, MimeFlags flags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimePart(MimePartInfo part, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeParts(List`1 parts, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimePart(MimePartInfo part, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ImapItemConverter.<>c__DisplayClass2.<WriteMimePart>b__0() at Microsoft.Exchange.Data.Storage.ConvertUtils.CallCts(Trace tracer, String methodName, String exceptionString, CtsCall ctsCall) at Microsoft.Exchange.Data.Storage.ImapItemConverter.WriteMimePart(ItemToMimeConverter converter, MimeStreamWriter writer, OutboundConversionOptions options, MimePartInfo partInfo, MimeFlags conversionFlags) at Microsoft.Exchange.Data.Storage.ImapItemConverter.GetBody(Stream outStream) at Microsoft.Exchange.Data.Storage.ImapItemConverter.GetBody(Stream outStream, UInt32[] indices) From my reading around it seems that the suggestion is to ask users to log in to Outlook / OWA and view the messages there. However, having logged in as the users myself, the messages cannot be found either through searching or by browsing the folder detailed in the log entry. The server returns the following error to the client: "The message could not be retrieved using the IMAP4 protocol. The message has not been deleted and may be accessible using either Microsoft Outlook or Microsoft Office Outlook Web Access. You can also try contacting the original sender of the message to find out about the contents of the message. Retrieval of this message will be retried when the server is updated with a fix that addresses the problem." Messages were transferred in to Exchange by copying them from the old Apple Xserve, accessed using IMAP. So my question, finally: 1. Is there any way to get the IMAP Exchange connector to rebuild its cache of messages since it doesn't seem to be pulling them directly from the MAPI store? 2. Alternatively, if there is no database, any ideas on why these messages don't appear in Outlook or OWA would be gratefully received. Many thanks, Mike

    Read the article

  • Unable to burn Windows ISO from Fedora

    - by user331947
    First of all, English is not my native tongue, so apologies for any mistakes. My computer recently started prompting that it can't launch Windows successfully. So I just choose start Windows normally. Then, I found that the startup freezes at the Windows screen (before the login prompt). I have tried rebooting several times and get the same results. So I just gave up. After few days, I tried to boot up my laptop again. This time it got to the desktop, but it's extremely slow and the icons on my Desktop don't show up. I decided to format the Windows partition and reinstall a new one. (It is usually faster that way since I kept my 400GB+ data on aother partition and programs and the rest in the same partition as Windows). The thing is I get the Windows disc at the moment (Traveling aboard). But I have a Windows 7 disc image on my hard disk. So, I downloaded Ubuntu 14.04 LTS, made a Live USB, and then try to burn the image from Ubuntu. But the program just freezes and I don't know why. I tried several times and it's still the same. So I tried using Fedora instead, just to see if it will work. The Disk Image Writer report something like this. Error unmounting /dev/dm-0: Command-line `umount "/dev/dm-0"' exited with non-zero exit status 32: umount: /: target is busy (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1).) (udisks-error-quark, 14) Also, I tried installing linux on the windows partition. The installation program freezes (both Ubuntu and Fedora). So, I thought that maybe something are wrong with my hard disk. I seek the solution on the internet and found that gparted can be used to format a partition. And it also froze at "Searching /dev/sda/ partition ...". I'm using Lenovo Y570. Spec below. http://www.notebookreview.com/notebookreview/lenovo-ideapad-y570-review-a-lenovo-bestseller/3/ Can anyone suggest a next step in diagnosing and fixing this problem? Thanks in advance.

    Read the article

  • Exchange IMAP4 connector - Error Event ID 2006

    - by MikeB
    A couple of users in my organisation use IMAP4 to connect to Exchange 2007 (Update rollup 9 applied) because they prefer Thunderbird / Postbox clients. One of the users is generating errors in the Application Log as follows: An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 1523, user "*******", folder *********, subject: "******", date: "*******" into MIME format. Microsoft.Exchange.Data.Storage.ConversionFailedException: Message content has become corrupted. ---> System.ArgumentException: Value should be a valid content type in the form 'token/token' Parameter name: value at Microsoft.Exchange.Data.Mime.ContentTypeHeader.set_Value(String value) at Microsoft.Exchange.Data.Storage.MimeStreamWriter.WriteHeader(HeaderId type, String data) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeStreamAttachment(StreamAttachmentBase attachment, MimeFlags flags) --- End of inner exception stack trace --- at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeStreamAttachment(StreamAttachmentBase attachment, MimeFlags flags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeAttachment(MimePartInfo part, MimeFlags flags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimePart(MimePartInfo part, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimeParts(List`1 parts, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ItemToMimeConverter.WriteMimePart(MimePartInfo part, MimeFlags mimeFlags) at Microsoft.Exchange.Data.Storage.ImapItemConverter.<>c__DisplayClass2.<WriteMimePart>b__0() at Microsoft.Exchange.Data.Storage.ConvertUtils.CallCts(Trace tracer, String methodName, String exceptionString, CtsCall ctsCall) at Microsoft.Exchange.Data.Storage.ImapItemConverter.WriteMimePart(ItemToMimeConverter converter, MimeStreamWriter writer, OutboundConversionOptions options, MimePartInfo partInfo, MimeFlags conversionFlags) at Microsoft.Exchange.Data.Storage.ImapItemConverter.GetBody(Stream outStream) at Microsoft.Exchange.Data.Storage.ImapItemConverter.GetBody(Stream outStream, UInt32[] indices) From my reading around it seems that the suggestion is to ask users to log in to Outlook / OWA and view the messages there. However, having logged in as the users myself, the messages cannot be found either through searching or by browsing the folder detailed in the log entry. The server returns the following error to the client: "The message could not be retrieved using the IMAP4 protocol. The message has not been deleted and may be accessible using either Microsoft Outlook or Microsoft Office Outlook Web Access. You can also try contacting the original sender of the message to find out about the contents of the message. Retrieval of this message will be retried when the server is updated with a fix that addresses the problem." Messages were transferred in to Exchange by copying them from the old Apple Xserve, accessed using IMAP. So my question, finally: 1. Is there any way to get the IMAP Exchange connector to rebuild its cache of messages since it doesn't seem to be pulling them directly from the MAPI store? 2. Alternatively, if there is no database, any ideas on why these messages don't appear in Outlook or OWA would be gratefully received. Many thanks, Mike

    Read the article

  • Windows Phone 7 Prototype 001: Speech Recognition on WP7

    At some point in the future it will be awesome when you can just tell your computer what to do and it does it - without typing to help those of us with a blistering 11 WPM hunk and peck technique. Siri, a mobile digital assistant using speech recognition was voted best tech at SXSW. I dont know about that one. Although, I'm sure it will get better when Apple rebuilds it and  bundles on iPhone 5. So how would you do that on WP7? There have been some videos floating around showing Bing with some voice control so obviously the phone has speech recognition. So what options are there: System.Speech? Not included in WP7/SL Nuance software like Siri? No WP7/SL version yet. Invoking the SAPI dlls on the phone? No automation factory in WP7 SL. Web services using System.Speech and mic on the phone? YES! The last one was my least favorite but that works for now. I built a quick sample app to show how to do text-to-speech and speech recognition on WP7.   @eklimczak will not be happy with the developer designed UI. In this sample there is web service with provides access to the system.speech APIs in .NET. Basically its just passing around byte arrays. On the phone its using the XNA audio frameworks to play the text-to-speech stream and to record using the microphone. The code is pretty simple and you can download from the link at the end of this post. The only things to note are adjusting the WCF config to handle larger byte uploads and the Microphone API is a little weird with that 1 second buffer. It would be nice if you could just to mic.start and mic.end which would return an array of bytes instead of managing your own stream inside the buffer ready callback. Couple of downsides to this approach: Recoding from the phone has some static. Could be my code or the my mic is bad / not calibrated right. Having to make web service calls instead of local access is not ideal (Microsoft, please add an API for the SAPI dlls) Although in the context of an app like Siri its not so bad since you need to do web service lookups to get data back Speech recognition quality really depends on either a) a limited grammar set like that pizza grammar in the sample or b) training the recognizer. For the latter it would be annoying to have users train the system. Using the System.Speech stuff youd have to have a profile for each user. So until Microsoft adds some speech client APIs on the phone or Nuance releases a wp7 product, this is a decent workaround. In the future Id like to build something similar to Siri. I shall call it Iris in homage. Im a big fan of mobile speech apps because frankly its just not safe to Google while driving. Since some of my designer co-workers have been posting UI sketches for WP7, Id like to start posting some code prototypes for things I try out on the phone. That will probably last 2 weeks, but for the moment I have like 10 posts in the queue. Sample Code 100% guaranteed to work on my emulatorDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • List of blogs - year 2010

    - by hajan
    This is the last day of year 2010 and I would like to add links to all blogs I have posted in this year. First, I would like to mention that I started blogging in ASP.NET Community in May / June 2010 and have really enjoyed writing for my favorite technologies, such as: ASP.NET, jQuery/JavaScript, C#, LINQ, Web Services etc. I also had great feedback either through comments on my blogs or in Twitter, Facebook, LinkedIn where I met many new experts just as a result of my blog posts. Thanks to the interesting topics I have in my blog, I became DZone MVB. Here is the list of blogs I made in 2010 in my ASP.NET Community Weblog: (newest to oldest) Great library of ASP.NET videos – Pluralsight! NDepend – Code Query Language (CQL) NDepend tool – Why every developer working with Visual Studio.NET must try it! jQuery Templates in ASP.NET - Blogs Series jQuery Templates - XHTML Validation jQuery Templates with ASP.NET MVC jQuery Templates - {Supported Tags} jQuery Templates – tmpl(), template() and tmplItem() Introduction to jQuery Templates ViewBag dynamic in ASP.NET MVC 3 - RC 2 Today I had a presentation on "Deep Dive into jQuery Templates in ASP.NET" jQuery Data Linking in ASP.NET How do you prefer getting bundles of technologies?? Case-insensitive XPath query search on XML Document in ASP.NET jQuery UI Accordion in ASP.NET MVC - feed with data from database (Part 3) jQuery UI Accordion in ASP.NET WebForms - feed with data from database (Part 2) jQuery UI Accordion in ASP.NET – Client side implementation (Part 1) Using Images embedded in Project’s Assembly Macedonian Code Camp 2010 event has finished successfully Tips and Tricks: Deferred execution using LINQ Using System.Diagnostics.Stopwatch class to measure the elapsed time Speaking at Macedonian Code Camp 2010 URL Routing in ASP.NET 4.0 Web Forms Conflicts between ASP.NET AJAX UpdatePanels & jQuery functions Integration of jQuery DatePicker in ASP.NET Website – Localization (part 3) Why not to use HttpResponse.Close and HttpResponse.End Calculate Business Days using LINQ Get Distinct values of an Array using LINQ Using CodeRun browser-based IDE to create ASP.NET Web Applications Using params keyword – Methods with variable number of parameters Working with Code Snippets in VS.NET  Working with System.IO.Path static class Calculating GridView total using JavaScript/JQuery The new SortedSet<T> Collection in .NET 4.0 JavaScriptSerializer – Dictionary to JSON Serialization and Deserialization Integration of jQuery DatePicker in ASP.NET Website – JS Validation Script (part 2) Integration of jQuery DatePicker in ASP.NET Website (part 1) Transferring large data when using Web Services Forums dedicated to WebMatrix Microsoft WebMatrix – Short overview & installation Working with embedded resources in Project's assembly Debugging ASP.NET Web Services Save and Display YouTube Videos on ASP.NET Website Hello ASP.NET World... In addition, I would like to mention that I have big list of blog posts in CodeASP.NET Community (total 60 blogs) and the local MKDOT.NET Community (total 61 blogs). You may find most of my weblogs.asp.net/hajan blogs posted there too, but there you can find many others. In my blog on MKDOT.NET Community you can find most of my ASP.NET Weblog posts translated in Macedonian language, some of them posted in English and some other blogs that were posted only there. By reading my blogs, I hope you have learnt something new or at least have confirmed your knowledge. And also, if you haven't, I encourage you to start blogging and share your Microsoft Tech. thoughts with all of us... Sharing and spreading knowledge is definitely one of the noblest things which we can do in our life. "Give a man a fish and he will eat for a day. Teach a man to fish and he will eat for a lifetime" HAPPY NEW 2011 YEAR!!! Best Regards, Hajan

    Read the article

  • Feedback on "market manipulation", a peripheral game mechanic for a satirical MMO

    - by BerndBrot
    This question asks for feedback on a specific game-mechanic. Since there is not one right feedback on a game mechanic, I tried to provide enough context and guidelines to still make it possible for users to rate answers and to accept an answer as the best answer (following these criteria from Writer.SE's meta website). Please comment if you have any suggestions on how I could improve the question in that regard. So, let's begin with the game itself and some of its elements which are relevant for this question. Context I'm working on a satirical, text-based multiplayer adventure and role-playing game set in modern-day London. The game resolves around the concept of sin and features a myriad of (venomous) allusions to all the things that go wrong in this world. Players can choose between character classes like bullshit artist (consultant), bankster, lawyer, mobster, celebrity, politician, etc. In order to complete the game, the player has to live so sinfully with regard to any of the seven deadly sins that a demon is willing to offer them a contract of sponsorship. On their quest to live a sinful live, characters explore more and more locations of modern-day London (on a GoogleMap), fight "monsters" like insurance sales agents or Jehovah's Witnesses, and complete quests, like building a PowerPoint presentation out of marketing buzz words or keeping up a number of substance abuse effects in order to progress on the gluttony path. Battles are turn based with both combatants having a deck of cards, with which they try to make their enemy give in to temptations of all sorts. Tempted enemies sometimes become contacts (an item drop mechanic), which can be exploited for various benefits, depending on their area of influence (finance, underworld, bureaucracy, etc.), level of influence, and kind of sway that the player has over them (bribed, seduced, threatened, etc.) Once a contract has been exploited, the player loses that contact. Most actions require turns. Turns are limited, but refill each day. Criteria A number of peripheral game mechanics are supposed to represent real world abuses and mischief in a humorous way integrate real world data and events to strengthen the feeling of relevance of the game's humor with regard to real world problems add fun ways of interacting with other players add ways for players to express themselves through game-play Market manipulation is one such peripheral game mechanic and should fulfill all of these goals. Market manipulation This is my initial design of the mechanic: Players can enter the London Stock Exchange (LSE) (without paying a turn) LSE displays the stock prices of a number of companies in industries like weapons or tobacco as well as some derivatives based on wheat and corn. The stock prices are calculated based on the actual stock prices of these companies and derivatives (in real time) any market manipulations that were conducted by the players any market corrections of the system Players can buy and sell shares with cash, a resource in the game, at current in-game market value (without paying a turn). Players can manipulate the market, i.e. let the price of a share either rise or fall, by some amount, over a certain period of time. Manipulating the market requires 1 turn A contact in the financial sector (see above). The higher the level of influence of the contact, the stronger the effect of the manipulation on the stock price, and/or the shorter it takes for the manipulation to manifest itself. Market manipulation also adds a crime to the player's record. (There are a multitude of ways to take care of that, but it is still another "cost" of market manipulations.) The system continuously corrects market manipulations by letting the in-game prices converge towards their real world counterparts at a rate of 2% of the difference between the two per hour. Because of this market correction mechanism, pushing up prices (and screwing down prices) becomes increasingly difficult the higher (lower) the price already is. Whenever food prices reach a certain level, in-game stories are posted about hunger catastrophes happening somewhere far, far away (maybe with links to real world news stories). Whenever a player sells a certain number of shares with a sufficiently high margin, they are mentioned in that day's in-game financial news. Since the number of stock options is very limited, players will inevitably collide in their efforts to manipulate the market in their favor. Hopefully, it will also be a fun side-arena for guilds and covenants to fight each other. Question(s) What do you think of this mechanism given the criteria for peripheral game mechanics that I specified for my game? Do you have any ideas how the mechanic could be improved with regard to these criteria (or otherwise)? Could it be improved to allow for more expressive game-play, or involve an allusion to some other real world madness (like short selling, leveraging, or some other banking magic)? Are there any game-theoretic problems with this mechanic, like maybe certain dominant individual strategies that, collectively, lead to every player profiting and thus eliminating the idea of market manipulation PVP? Also, if you like (or dislike) this question, feel free to participate in the discussion on GDSE meta: "Should we be more lax with regard to SE's question/answer format to make game design questions possible?"

    Read the article

  • Rob Blackwell on interoperability and Azure

    - by Eric Nelson
    At QCon in March we had a sample Azure application implemented in both Java and Ruby to demonstrate that the Windows Azure Platform is not just about .NET. The following is an interesting interview with Rob Blackwell, the R&D director of the partner who implemented the application. UK Interoperability Team Interviews Rob Blackwell, R&D Director at Active Web Solutions. Is Microsoft taking interoperability seriously? Yes. In the past, I think Microsoft has, quite rightly come in for criticism, but architects and developers should look at this again. The Interoperability Bridges site (http://www.interoperabilitybridges.com/ ) shows a wide range of projects that allow interoperability from Java, Ruby and PHP for example. The Windows Azure platform has been architected with interoperable APIs in mind. It's straightforward to access the various storage facilities from just about any language or platform. Azure compute is capable of running more than just C# applications! Why is interoperability important to you? My company provides consultancy and bespoke development services. We're a Microsoft Gold Partner, but we live in the real world where companies have a mix of technologies provided by a variety of vendors. When developing an enterprise software solution, you rarely have a completely blank canvas. We often see integration scenarios where we need to exchange data with legacy systems. It's not unusual to see modern Silverlight applications being built on top of Java or Mainframe based back ends. Could you give us some examples of where interoperability has been important for your projects? We developed an innovative Sea Safety system for the RNLI Lifeboats here in the UK. Commercial Fishing is one of the most dangerous professions and we helped developed the MOB Guardian System which uses satellite technology and man overboard devices to raise the alarm when a fisherman gets into trouble. The solution is implemented in .NET running on Windows, but without interoperable standards, it would have been impossible to communicate with the satellite gateway technology. For more information, please see the case study: http://www.microsoft.com/casestudies/Case_Study_Detail.aspx?CaseStudyID=4000005892 More recently, we were asked to build a web site to accompany the QCon 2010 conference in London to help demonstrate and promote interoperability. We built the site using Java and Restlet and hosted it in Windows Azure Compute. The site accepts feedback from visitors and all the data is stored in Windows Azure Storage. We also ported the application to Ruby on Rails for demonstration purposes. Visitors to the stand were surprised that this was even possible. Why should Java developers be interested in Windows Azure? Windows Azure Storage consists of Blobs, Queues and Tables. The storage is scalable, durable, secure and cost-effective. Using the WindowsAzure4j library, it's easy to use, and takes just a few lines of code. If you are writing an application with large data storage requirements, or you want an offsite backup, it makes a lot of sense. Running Java applications in Azure Compute is straightforward with tools like the Tomcat Solution Accelerator (http://code.msdn.microsoft.com/winazuretomcat )and AzureRunMe (http://azurerunme.codeplex.com/ ). The Windows Azure AppFabric Service Bus can also be used to connect heterogeneous systems running on different networks and in different data centres. How can The Service Bus be considered an interoperability solution? I think that the Windows Azure AppFabric Service Bus is one of Microsoft’s best kept secrets. Think of it as “a globally scalable application plumbing kit in the sky”. If you have used Enterprise Service Buses before, you’ll be familiar with the concept. Applications can connect to the service bus to securely exchange data – these can be point to point or multicast links. With the AppFabric Service Bus, the applications can exist anywhere that has access to the Internet and the connections can traverse firewalls. This makes it easy to extend or scale your application or reach out to other networks and technologies. For example, let’s say you have a SQL Server database running on premises and you want to expose the data to a Java application running in the cloud. You could set up a point to point Service Bus connection and use JDBC. Traditionally this would have been difficult or impossible without punching holes in firewalls and compromising security. Rob Blackwell is R&D Director at Active Web Solutions, www.aws.net , a Microsoft Gold Partner specialising in leading edge software solutions. He is an occasional writer and conference speaker and blogs at www.robblackwell.org.uk Related Links: UK Azure Online Community – join today. UK Windows Azure Site Start working with Windows Azure

    Read the article

  • Markus Zirn, "Big Data with CEP and SOA" @ SOA, Cloud &amp; Service Technology Symposium 2012

    - by JuergenKress
    ORACLE PROMOTIONAL DISCOUNT FOR EXCLUSIVE ORACLE DISCOUNT, ENTER PROMO CODE: DJMXZ370 Early-Bird Registration is Now Open with Special Pricing! Register before July 1, 2012 to qualify for discounts. Visit the Registration page for details. The International SOA, Cloud + Service Technology Symposium is a yearly event that features the top experts and authors from around the world, providing a series of keynotes, talks, demonstrations, and panels, as well as training and certification workshops - all dedicated to empowering IT professionals to realize modern service technologies and practices in the real world. Click here for a two-page printable conference overview (PDF). Big Data with CEP and SOA - September 25, 2012 - 14:15 Speaker: Markus Zirn, Oracle and Baz Kuthi, Avocent The "Big Data" trend is driving new kinds of IT projects that process machine-generated data. Such projects store and mine using Hadoop/ Map Reduce, but they also analyze streaming data via event-driven patterns, which can be called "Fast Data" complementary to "Big Data". This session highlights how "Big Data" and "Fast Data" design patterns can be combined with SOA design principles into modern, event-driven architectures. We will describe specific architectures that combines CEP, Distributed Caching, Event-driven Network, SOA Composites, Application Development Framework, as well as Hadoop. Architecture patterns include pre-processing and filtering event streams as close as possible to the event source, in memory master data for event pattern matching, event-driven user interfaces as well as distributed event processing. Focus is on how "Fast Data" requirements are elegantly integrated into a traditional SOA architecture. Markus Zirn is Vice President of Product Management covering Oracle SOA Suite, SOA Governance, Application Integration Architecture, BPM, BPM Solutions, Complex Event Processing and UPK, an end user learning solution. He is the author of “The BPEL Cookbook” (rated best book on Services Oriented Architecture in 2007) as well as “Fusion Middleware Patterns”. Previously, he was a management consultant with Booz Allen & Hamilton’s High Tech practice in Duesseldorf as well as San Francisco and Vice President of Product Marketing at QUIQ. Mr. Zirn holds a Masters of Electrical Engineering from the University of Karlsruhe and is an alumnus of the Tripartite program, a joint European degree from the University of Karlsruhe, Germany, the University of Southampton, UK, and ESIEE, France. KEYNOTES & SPEAKERS More than 80 international subject matter experts will be speaking at the Symposium. Below are confirmed keynotes and speakers so far. Over 50% of the agenda has not yet been finalized. Many more speakers to come. View the partial program calendars on the Conference Agenda page. CONFERENCE THEMES & TRACKS Cloud Computing Architecture & Patterns New SOA & Service-Orientation Practices & Models Emerging Service Technology Innovation Service Modeling & Analysis Techniques Service Infrastructure & Virtualization Cloud-based Enterprise Architecture Business Planning for Cloud Computing Projects Real World Case Studies Semantic Web Technologies (with & without the Cloud) Governance Frameworks for SOA and/or Cloud Computing Projects Service Engineering & Service Programming Techniques Interactive Services & the Human Factor New REST & Web Services Tools & Techniques Oracle Specialized SOA & BPM Partners Oracle Specialized partners have proven their skills by certifications and customer references. To find a local Specialized partner please visit http://solutions.oracle.com SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Markus Zirn,SOA Symposium,Thomas Erl,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • Call Webservices&hellip;Maybe!?

    - by MOSSLover
    So I have been doing preliminary work for my iOS talk for a while, but did not get into the meat of the project until recently.  One day I envision my talk uploading pictures from a camera on an iPhone or iPad into SharePoint and telling people how I did it.  As you know with my Silverlight talk and any new technology, building new talks with new technologies always ends up with some pain points that you must jump over just to grab data.  So step 1 always starts out with how do we even access a webservice using the new technology. I started out watching every single SPC video available on oAuth and Rest Webservices in SharePoint 2013.  I also sent an email to Eric Shupps about some REST and 2013 examples.  The videos further confused me, because all the videos were on SharePoint hosted apps (provider and autohosted).  I did not want to create a SharePoint hosted app, but instead a mobile app outside of the SharePoint context altogether.  Nick Swan sent me his code and it was great for a starting point on how the JSON calls would look like on iOS, but I was still missing a piece.  Nick does a great job on showing how to use the REST/JSON calls in a non-MS tech, however his presentation uses the SharePoint context and can grab the SPAppToken.  At this point I had to ask the question how do you grab the SAML token outside of SharePoint 2013 in iOS using Objective-C?  After reading all the MSDN documentation, some documentation on Restkit and Objective-C/oAuth calls, and some SharePoint 2013 blog post my head was swimming.  I was dreaming about REST and iOS in SharePoint 2013.  SAML tokens were taunting me.  I was nowhere near understanding 2013. I started talking to my friend, Pedro Jimenez, who is also playing with Objective-C and went to SPC.  He found me a couple good MSDN posts with REST/JSON calls that basically showed the accessToken was all I needed (at this point I was still thinking iOS needed to be a provider hosted app which is wrong).  So then again I had to ask the SAML token question…How do you get a SAML token outside of SharePoint without the TokenHelper class? So then I started talking to people and thinking why do I need to completely avoid TokenHelper…The solution in concept is basically create a webservice in Azure wrapped into a Provider Hosted App in SharePoint.  Wictor Wilen created a helper webservice in the following blog post: http://www.wictorwilen.se/Post/How-to-do-active-authentication-to-Office-365-and-SharePoint-Online.aspx. So now I have to basically stand up the webservice, the SharePoint app wrapper, and then use Restkit to call the first webservice to grab the token and then the second webservice to pass in the token and grab some SharePoint data.  What this means is that you can no longer just pass credentials into SharePoint webservices and get data back.  You have to pass in a SAML token with every single webservice call to SharePoint.  The theory is that this token is associated with the permissions the app can handle (read, write, whatever).  It seems like a ton of pain and a lot of work, but this is step 1 in my crusade to pull some piece of data into iOS from SharePoint and show people how to do it themselves.  In the upcoming months hopefully I can get halfway to my end goal. Technorati Tags: SharePoint 2013,REST,oAuth,Objective-C,iOS

    Read the article

  • SQLAuthority News – Windows Efficiency Tricks and Tips – Personal Technology Tip

    - by pinaldave
    This is the second post in my series about my favorite Technology Tips, and I wanted to focus on my favorite Microsoft product.  Choosing just one topic to cover was too hard, though.  There are so many interesting things I have to share that I am forced to turn this second installment into a five-part post.  My five favorite Windows tips and tricks. 1) You can open multiple applications using the task bar. With the new Windows 7 taskbar, you can start navigating with just one click.  For example, you can launch Word by clicking on the icon on your taskbar, and if you are using multiple different programs at the same time, you can simply click on the icon to return to Word.  However, what if you need to open another Word document, or begin a new one?  Clicking on the Word icon is just going to bring you back to your original program.  Just click on the Word icon again while holding down the shift key, and you’ll open up a new document. 2) Navigate the screen with the touch of a button – and not your mouse button. Yes, we live in a pampered age.  We have access to amazing technology, and it just gets better every year.  But have you ever found yourself wishing that right when you were in the middle of something, you didn’t have to interrupt your work flow be reaching for your mouse to navigate through the screen?  Yes, we have all been guilty of this pampered wish.  But Windows has delivered!  Now you can move your application window using your arrow keys. Lock the window to the left, right hand screen: Win+left Arrow and Win+right Arrow Maximize & minimize: Win+up arrow and Win+down arrow Minimize all items on screen: Win+M Return to your original folder, or browse through all open windows: Alt+up arrow, Alt+Left Arrow, or Alt+right arrow Close down or reopen all windows: win+home 3) Are you one of the few people who still uses Command Prompt? You know who you are, and you aren’t ashamed to still use this option that so many people have forgotten about it.  You can easily access it by holding down the shift key while RIGHT clicking on any folder. 4) Quickly select multiple files without using your mouse. We all know how to select multiple files or folders by Ctrl-clicking or Shift-clicking multiple items.  But all of us have tried this, and then accidentally released Ctrl, only to lose all our precious work.  Now there is a way to select only the files you want through a check box system.  First, go to Windows Explorer, click Organize, and then “Folder and Search Options.”  Go to the View tab, and under advanced settings, you can find a box that says “Use check boxes to select items.”  Once this has been selected, you will be able to hover your mouse over any file and a check box will appear.  This makes selecting multiple, random files quick and easy. 5) Make more out of remote access. If you work anywhere in the tech field, you are probably the go-to for computer help with friends and family, and you know the usefulness of remote access (ok, some of us use this extensively at work, as well, but we all have friends and family who rely on our skills!).  Often it is necessary to restart a computer, which is impossible in remote access as the computer will not show the shutdown menu.  To force the computer to do your wishes, we return to Command Prompt.  Open Command Prompt and type “shutdown /s” for shutdown, or “shutdown /r” for restart. I hope you will find above five tricks which I use in my daily use very important. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Personal Technology

    Read the article

  • List of Upcoming Appearances

    - by Chris Gardner
    Greetings. I know I have been in work sponsored hiding lately. We are working furiously on a beta project to secure a contract, and I can't really talk about it yet. Hopefully, the contracts will be soon signed. Not only will we then have money, but I can talk about all this really cool tech with which I have been playing. However, since the contract is not signed, I need to bring you people up to date with where I will be during the summer. Let's face it, you can't be a speaker / blogger without pandering to shameless self-promotion. First, I will, once again, be staffing the Hands-on-Labs at TechEd North America. Unfortunately, TechEd North America is already sold out for this year. However, if you're already going, drop by the labs and say Hi. Also, keep an eye on Twitter to track me throughout the event. Also, look for a post in a few hours with my specific picks for what content I'm looking forward to seeing this year. Immediately following TechEd North America, I will be flying into Knoxville to speak at CodeStock. I will be presenting my introduction and intermediate Xbox 360 development talks. There are a TON of great content at CodeStock this year, but there are only about 50 tickets left. After that whirlwind of work, things settle for awhile. That means I'm available to speak at your User Group, luncheon, bowling league, birthday party, anniversary, or bat mitzvah. Mid August brings us to That Conference. This one is going to be a blast. If you haven't heard of That Conference yet, you should really check it out. This will also be my introduction and intermediate Xbox 360 development talks. This is a new conference, and it looks like it will be a great one. Finally, we will turn our attention to DevLink. DevLink has the distinction of picking up my newest talk, Creating Stereoscopic 3D Graphics in XNA. On top of that, I'm giving an general Xbox 360 and Windows Phone 7 talk. DevLink has added an new "XNA and Kinect" track, so there will me a ton of great game content. That should bring us through the summer. As I solidify the Stereoscopic talk, look for some content on that to creep up on here. I will say it's the first topic I've played around with that is easier in 3D than 2D. Also, the organizers of Alabama Code Camp are still trying to reschedule the event. When that happens, I'll get that information out. Also, we are looking to expand our development team. If you are interested in working for / with me, keep an eye on the T & W Operations website. I know we're immediately looking for a junior level developer, but I think a few higher level position may come up soon. You MUST apply through the website, but drop me a personal line if you do apply. I'll keep an eye out for the application.

    Read the article

  • Oracle Enterprise Manager 11g is Here!

    - by chung.wu
    We hope that you enjoyed the launch event. If you missed it, you may still watch it via our on demand webcast, which is being produced and will be posted very shortly. 11gR1 is a major release of Oracle Enterprise Manager, and as one would expect from a big release, there are many new capabilities that appeal to a broad set of audience. Before going into the laundry list of new features, let's talk about the key themes for this release to put things in perspective. First, this release is about Business Driven Application Management. The traditional paradigm of component centric systems management simply cannot satisfy the management needs of modern distributed applications, as they do not provide adequate visibility of whether these applications are truly meeting the service level expectations of the business users. Business Driven Application Management helps IT manage applications according to the needs of the business users so that valuable IT resources can be better focused to help deliver better business results. To support Business Driven Application Management, 11gR1 builds on the work that we started in 10g to provide better support for user experience management. This capability helps IT better understand how users use applications and the experience that the applications provide so that IT can take actions to help end users get their work done more effectively. In addition, this release also delivers improved business transaction management capabilities to make it faster and easier to understand and troubleshoot transaction problems that impact end user experience. Second, this release includes strengthened Integrated Application-to-Disk Management. Every component of an application environment, from the application logic to the application server, to database, host machines and storage devices, etc... can affect end user experience. After user experience improvement needs are identified, IT needs tools that can be used do deep dive diagnostics for each of the application environment component, analyze configurations and deploy changes. Enterprise Manager 11gR1 extends coverage of key application environment components to include full support for Oracle Database 11gR2, Exadata V2, and Fusion Middleware 11g. For composite and Java application management, two key pieces of technologies, JVM Diagnostic and Composite Application Monitoring and Modeler, are now fully integrated into Enterprise Manager so there is no need to install and maintain separate tools. In addition, we have delivered the first set of integration between Enterprise Manager Grid Control and Enterprise Manager Ops Center so that hardware level events can be centrally monitored via Grid Control. Finally, this release delivers Integrated Systems Management and Support for customers of Oracle technologies. Traditionally, systems management tools and tech support were separate silos. When problems occur, administrators used internally deployed tools to try to solve the problems themselves. If they couldn't fix the problems, then they would use some sort of support website to get help from the vendor's support staff. Oracle Enterprise Manager 11g integrates problem diagnostic and remediation workflow. Administrators can use Oracle Enterprise Manager's various diagnostic tools to begin the troubleshooting process. They can also use the integrated access to My Oracle Support to look up solutions and download software patches. If further help is needed, administrators can open service requests from right within Oracle Enterprise Manager and track status update. Oracle's support staff, using Enterprise Manager's configuration management capabilities, can collect important configuration information about customer environments in order to expedite problem resolution. This tight integration between Oracle Enterprise Manager and My Oracle Support helps Oracle customers achieve a Superior Ownership Experience for their Oracle products. So there you have it. This is a brief 50,000 feet overview of Oracle Enterprise Manager 11g. We know you are hungry for the details. We are going to write about it in the coming days and weeks. For those of you that absolutely can't wait to find out more, you may download our software to try it out today. In fact, for the first time ever, the initial release of Oracle Enterprise Manager is available for both 32 and 64 bit Linux. Additional O/S ports will arrive in the coming weeks. Please stay tuned on the Oracle Enterprise Manager blog for additional updates.

    Read the article

  • How do NTP Servers Manage to Stay so Accurate?

    - by Akemi Iwaya
    Many of us have had the occasional problem with our computers and other devices retaining accurate time settings, but a quick sync with an NTP server makes all well again. But if our own devices can lose accuracy, how do NTP servers manage to stay so accurate? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. Photo courtesy of LEOL30 (Flickr). The Question SuperUser reader Frank Thornton wants to know how NTP servers are able to remain so accurate: I have noticed that on my servers and other machines, the clocks always drift so that they have to sync up to remain accurate. How do the NTP server clocks keep from drifting and always remain so accurate? How do the NTP servers manage to remain so accurate? The Answer SuperUser contributor Michael Kjorling has the answer for us: NTP servers rely on highly accurate clocks for precision timekeeping. A common time source for central NTP servers are atomic clocks, or GPS receivers (remember that GPS satellites have atomic clocks onboard). These clocks are defined as accurate since they provide a highly exact time reference. There is nothing magical about GPS or atomic clocks that make them tell you exactly what time it is. Because of how atomic clocks work, they are simply very good at, having once been told what time it is, keeping accurate time (since the second is defined in terms of atomic effects). In fact, it is worth noting that GPS time is distinct from the UTC that we are more used to seeing. These atomic clocks are in turn synchronized against International Atomic Time or TAI in order to not only accurately tell the passage of time, but also the time. Once you have an exact time on one system connected to a network like the Internet, it is a matter of protocol engineering enabling transfer of precise times between hosts over an unreliable network. In this regard a Stratum 2 (or farther from the actual time source) NTP server is no different from your desktop system syncing against a set of NTP servers. By the time you have a few accurate times (as obtained from NTP servers or elsewhere) and know the rate of advancement of your local clock (which is easy to determine), you can calculate your local clock’s drift rate relative to the “believed accurate” passage of time. Once locked in, this value can then be used to continuously adjust the local clock to make it report values very close to the accurate passage of time, even if the local real-time clock itself is highly inaccurate. As long as your local clock is not highly erratic, this should allow keeping accurate time for some time even if your upstream time source becomes unavailable for any reason. Some NTP client implementations (probably most ntpd daemon or system service implementations) do this, and others (like ntpd’s companion ntpdate which simply sets the clock once) do not. This is commonly referred to as a drift file because it persistently stores a measure of clock drift, but strictly speaking it does not have to be stored as a specific file on disk. In NTP, Stratum 0 is by definition an accurate time source. Stratum 1 is a system that uses a Stratum 0 time source as its time source (and is thus slightly less accurate than the Stratum 0 time source). Stratum 2 again is slightly less accurate than Stratum 1 because it is syncing its time against the Stratum 1 source and so on. In practice, this loss of accuracy is so small that it is completely negligible in all but the most extreme of cases. Have something to add to the explanation? Sound off in the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.

    Read the article

  • A Letter for Your CEO About Social Marketing’s Future

    - by Mike Stiles
    We’ll leave it to you to decide if or how to sneak this in front of them. Dear Chief: This social marketing thing looks serious. It’s gone beyond having a Facebook page and putting our info and a few promotions on it. It’s seriously disrupting how we’ve always done marketing. And its implications reach well beyond marketing. My concern is that we stay positioned ahead of these changes and are prepared to embrace, adapt and capitalize on these new capabilities as opposed to spending valuable time and money trying to shoehorn social into “the way we’ve always done things.” I’m also concerned about what happens if our competition executes on this before we do. The days of being able to impose our ad messaging on the masses to great effect are numbered. The public now has the tech tools and ability to filter out things that are irrelevant to them. And frankly, spending ad dollars to reach unlikely prospects isn’t the most efficient path for us either. Today, our customers have to genuinely love what we do. That starts with a renewed, customer-centric focus on the quality and usability of our product. If their experience with it is bad, they now have very connected, loud voices that will testify against us. We can’t afford that. Next, their customer service experience, before and after the sale, has to be a pleasant surprise. That requires truly knowing our customers and listening to them. Lip service won’t cut it. We have to get and use as much data on the customer as possible, interact with them wherever they want to interact with us, and commit to impressing them. If we do, they’ll get out there and advertise for us. Since peer-to-peer recommendation is the most effective marketing, that’s money in the bank. Social marketing is about forming relationships, same as how individuals use social. We want them to know us, trust us, and get real value from knowing us. That requires honesty and transparency that before now might have been uncomfortable. I propose that if we clearly make everything we do about our customers’ wants and needs, we’ll have nothing to hide. It will solidify customer loyalty, retention, and thus, revenue. These things can’t happen without certain tools and structural changes in the organization. There are social cloud platforms that integrate social management into all of the necessary areas: CRM, customer service, sales, marketing automation, content marketing, ecommerce, etc. This is will give us a real-time, complete view of the customer so their every interaction with us is attentive, personalized, accurate, relevant, and satisfying. Without it, we’re just a collage of disjointed systems, each gathering data that informs only its own departmental silo. The customer is voluntarily giving us everything we need to know about them to win them over, but we have to start listening and putting the pieces together. There’s still time. Brands are coming to terms with this transition to the socially enabled enterprise, but so far they aren’t moving very fast. Like us, they’re dealing with long-entrenched technologies and processes. CMO’s and CIO’s have to form new partnerships. Content operations have to be initiated and properly staffed and funded. Various departments must be able to utilize interconnected big data. What will separate the winners from the losers? Well chief, that’s why I’m writing you. It’s in your hands. These initiatives won’t get the kind of priority and seriousness that inspire actual deadlines & action unless they come from your desk. You have to be the champion of customer centricity. You have to be our change agent. You have to be our innovator. Otherwise, it’s going to be business as usual, and that puts us in a very vulnerable place. Sincerely, Your Team @mikestilesPhoto: Gary Scott, stock.xchng

    Read the article

  • Restricting Input in HTML Textboxes to Numeric Values

    - by Rick Strahl
    Ok, here’s a fairly basic one – how to force a textbox to accept only numeric input. Somebody asked me this today on a support call so I did a few quick lookups online and found the solutions listed rather unsatisfying. The main problem with most of the examples I could dig up was that they only include numeric values, but that provides a rather lame user experience. You need to still allow basic operational keys for a textbox – navigation keys, backspace and delete, tab/shift tab and the Enter key - to work or else the textbox will feel very different than a standard text box. Yes there are plug-ins that allow masked input easily enough but most are fixed width which is difficult to do with plain number input. So I took a few minutes to write a small reusable plug-in that handles this scenario. Imagine you have a couple of textboxes on a form like this: <div class="containercontent"> <div class="label">Enter a number:</div> <input type="text" name="txtNumber1" id="txtNumber1" value="" class="numberinput" /> <div class="label">Enter a number:</div> <input type="text" name="txtNumber2" id="txtNumber2" value="" class="numberinput" /> </div> and you want to restrict input to numbers. Here’s a small .forceNumeric() jQuery plug-in that does what I like to see in this case: [Updated thanks to Elijah Manor for a couple of small tweaks for additional keys to check for] <script type="text/javascript"> $(document).ready(function () { $(".numberinput").forceNumeric(); }); // forceNumeric() plug-in implementation jQuery.fn.forceNumeric = function () { return this.each(function () { $(this).keydown(function (e) { var key = e.which || e.keyCode; if (!e.shiftKey && !e.altKey && !e.ctrlKey && // numbers key >= 48 && key <= 57 || // Numeric keypad key >= 96 && key <= 105 || // comma, period and minus key == 190 || key == 188 || key == 109 || // Backspace and Tab and Enter key == 8 || key == 9 || key == 13 || // Home and End key == 35 || key == 36 || // left and right arrows key == 37 || key == 39 || // Del and Ins key == 46 || key == 45) return true; return false; }); }); } </script> With the plug-in in place in your page or an external .js file you can now simply use a selector to apply it: $(".numberinput").forceNumeric(); The plug-in basically goes through each selected element and hooks up a keydown() event handler. When a key is pressed the handler is fired and the keyCode of the event object is sent. Recall that jQuery normalizes the JavaScript Event object between browsers. The code basically white-lists a few key codes and rejects all others. It returns true to indicate the keypress is to go through or false to eat the keystroke and not process it which effectively removes it. Simple and low tech, and it works without too much change of typical text box behavior.© Rick Strahl, West Wind Technologies, 2005-2011Posted in JavaScript  jQuery  HTML  

    Read the article

  • SQL SERVER – MSQL_XP – Wait Type – Day 20 of 28

    - by pinaldave
    In this blog post, I am going to discuss something from my field experience. While consultation, I have seen various wait typed, but one of my customers who has been using SQL Server for all his operations had an interesting issue with a particular wait type. Our customer had more than 100+ SQL Server instances running and the whole server had MSSQL_XP wait type as the most number of wait types. While running sp_who2 and other diagnosis queries, I could not immediately figure out what the issue was because the query with that kind of wait type was nowhere to be found. After a day of research, I was relieved that the solution was very easy to figure out. Let us continue discussing this wait type. From Book On-Line: ?MSQL_XP occurs when a task is waiting for an extended stored procedure to end. SQL Server uses this wait state to detect potential MARS application deadlocks. The wait stops when the extended stored procedure call ends. MSQL_XP Explanation: This wait type is created because of the extended stored procedure. Extended Stored Procedures are executed within SQL Server; however, SQL Server has no control over them. Unless you know what the code for the extended stored procedure is and what it is doing, it is impossible to understand why this wait type is coming up. Reducing MSQL_XP wait: As discussed, it is hard to understand the Extended Stored Procedure if the code for it is not available. In the scenario described at the beginning of this post, our client was using third-party backup tool. The third-party backup tool was using Extended Stored Procedure. After we learned that this wait type was coming from the extended stored procedure of the backup tool they were using, we contacted the tech team of its vendor. The vendor admitted that the code was not optimal at some places, and within that day they had provided the patch. Once the updated version was installed, the issue on this wait type disappeared. As viewed in the wait statistics of all the 100+ SQL Server, there was no more MSSQL_XP wait type found. In simpler terms, you must first identify which Extended Stored Procedure is creating the wait type of MSSQL_XP and see if you can get in touch with the creator of the SP so you can help them optimize the code. If you have encountered this MSSQL_XP wait type, I encourage all of you to write how you managed it. Please do not mention the name of the vendor in your comment as I will not approve it. The focus of this blog post is to understand the wait types; not talk about others. Read all the post in the Wait Types and Queue series. Note: The information presented here is from my experience and there is no way that I claim it to be accurate. I suggest reading Book OnLine for further clarification. All the discussion of Wait Stats in this blog is generic and varies from system to system. It is recommended that you test this on a development server before implementing it to a production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

    Read the article

  • Add Social Elements to Your Gmail Contacts with Rapportive

    - by Matthew Guay
    Would you like to discover more about your contacts?  Xobni is a great tool for this in Outlook, and thanks to a small plugin for Gmail, you can get similar functionality right from your favorite webmail app. Setup Rapportive on Your Gmail Browse to the Rapportive site (link below), and click install to add it to your browser.  Rapportive currently only supports Firefox and Google Chrome.  In this test, we installed it on Google Chrome.  Notice that Chrome warns Rapportive may access your private data from Gmail, though Rapportive says that they only use this data securely on your computer or their servers. Next time you log into Gmail, open a message to see the new Rapportive sidebar.  Click Log in to get started. Choose if you want to let Rapportive to access your data. Finally, choose whether to stay logged into Rapportive or to log out when you log out of Gmail.   Using Rapportive Now, when you open an email, you should see more information about your contact on the right side of the message where you usually see Google AdSense ads. You may see an avatar, short bio, and links to their social networks.  You can add notes about a contact also, which lets you use Rapportive as a CRM. You may see more information on some contacts.  Here we see a contact that shows recent Tweets and links to several social networks. Take Rapportive Further You can add more features to Rapportive with Raplets, which are small extensions that add more information or CRM functionality.  To add these, click the Rapportive button on the top of Gmail, and select Add Raplets to Rapportive. Find a Raplet you want, and click Add This. A popup will open to give you more information about the Raplet; click the Add button at the bottom if you still want it. And, if you’re wish to close Rapportive without logging out of Gmail, click the Rapportive link in Gmail and select Log out. Conclusion Whether you want to find out more about your contacts or keep track of notes about them, Rapportive is a great way to do this from Gmail.  With tools like this, Gmail gets a bit more powerful and feels more like a desktop application. If you would like this type of functionality in Outlook, check out our article on how to power up Outlook’s search and contacts with Xobni. Add Rapportive to Gmail Similar Articles Productive Geek Tips How to Import Gmail Contacts Into Outlook 2007Enhance Your Gmail Account in ChromeFigure out which Online accounts are selling your email to spammersAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogFix for New Contact Group Button Not Displaying in Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

    Read the article

  • World Record Batch Rate on Oracle JD Edwards Consolidated Workload with SPARC T4-2

    - by Brian
    Oracle produced a World Record batch throughput for single system results on Oracle's JD Edwards EnterpriseOne Day-in-the-Life benchmark using Oracle's SPARC T4-2 server running Oracle Solaris Containers and consolidating JD Edwards EnterpriseOne, Oracle WebLogic servers and the Oracle Database 11g Release 2. The workload includes both online and batch workload. The SPARC T4-2 server delivered a result of 8,000 online users while concurrently executing a mix of JD Edwards EnterpriseOne Long and Short batch processes at 95.5 UBEs/min (Universal Batch Engines per minute). In order to obtain this record benchmark result, the JD Edwards EnterpriseOne, Oracle WebLogic and Oracle Database 11g Release 2 servers were executed each in separate Oracle Solaris Containers which enabled optimal system resources distribution and performance together with scalable and manageable virtualization. One SPARC T4-2 server running Oracle Solaris Containers and consolidating JD Edwards EnterpriseOne, Oracle WebLogic servers and the Oracle Database 11g Release 2 utilized only 55% of the available CPU power. The Oracle DB server in a Shared Server configuration allows for optimized CPU resource utilization and significant memory savings on the SPARC T4-2 server without sacrificing performance. This configuration with SPARC T4-2 server has achieved 33% more Users/core, 47% more UBEs/min and 78% more Users/rack unit than the IBM Power 770 server. The SPARC T4-2 server with 2 processors ran the JD Edwards "Day-in-the-Life" benchmark and supported 8,000 concurrent online users while concurrently executing mixed batch workloads at 95.5 UBEs per minute. The IBM Power 770 server with twice as many processors supported only 12,000 concurrent online users while concurrently executing mixed batch workloads at only 65 UBEs per minute. This benchmark demonstrates more than 2x cost savings by consolidating the complete solution in a single SPARC T4-2 server compared to earlier published results of 10,000 users and 67 UBEs per minute on two SPARC T4-2 and SPARC T4-1. The Oracle DB server used mirrored (RAID 1) volumes for the database providing high availability for the data without impacting performance. Performance Landscape JD Edwards EnterpriseOne Day in the Life (DIL) Benchmark Consolidated Online with Batch Workload System Rack Units BatchRate(UBEs/m) Online Users Users /Units Users /Core Version SPARC T4-2 (2 x SPARC T4, 2.85 GHz) 3 95.5 8,000 2,667 500 9.0.2 IBM Power 770 (4 x POWER7, 3.3 GHz, 32 cores) 8 65 12,000 1,500 375 9.0.2 Batch Rate (UBEs/m) — Batch transaction rate in UBEs per minute Configuration Summary Hardware Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 4 x 300 GB 10K RPM SAS internal disk 2 x 300 GB internal SSD 2 x Sun Storage F5100 Flash Arrays Software Configuration: Oracle Solaris 10 Oracle Solaris Containers JD Edwards EnterpriseOne 9.0.2 JD Edwards EnterpriseOne Tools (8.98.4.2) Oracle WebLogic Server 11g (10.3.4) Oracle HTTP Server 11g Oracle Database 11g Release 2 (11.2.0.1) Benchmark Description JD Edwards EnterpriseOne is an integrated applications suite of Enterprise Resource Planning (ERP) software. Oracle offers 70 JD Edwards EnterpriseOne application modules to support a diverse set of business operations. Oracle's Day in the Life (DIL) kit is a suite of scripts that exercises most common transactions of JD Edwards EnterpriseOne applications, including business processes such as payroll, sales order, purchase order, work order, and manufacturing processes, such as ship confirmation. These are labeled by industry acronyms such as SCM, CRM, HCM, SRM and FMS. The kit's scripts execute transactions typical of a mid-sized manufacturing company. The workload consists of online transactions and the UBE – Universal Business Engine workload of 61 short and 4 long UBEs. LoadRunner runs the DIL workload, collects the user’s transactions response times and reports the key metric of Combined Weighted Average Transaction Response time. The UBE processes workload runs from the JD Enterprise Application server. Oracle's UBE processes come as three flavors: Short UBEs < 1 minute engage in Business Report and Summary Analysis, Mid UBEs > 1 minute create a large report of Account, Balance, and Full Address, Long UBEs > 2 minutes simulate Payroll, Sales Order, night only jobs. The UBE workload generates large numbers of PDF files reports and log files. The UBE Queues are categorized as the QBATCHD, a single threaded queue for large and medium UBEs, and the QPROCESS queue for short UBEs run concurrently. Oracle's UBE process performance metric is Number of Maximum Concurrent UBE processes at transaction rate, UBEs/minute. Key Points and Best Practices Two JD Edwards EnterpriseOne Application Servers, two Oracle WebLogic Servers 11g Release 1 coupled with two Oracle Web Tier HTTP server instances and one Oracle Database 11g Release 2 database on a single SPARC T4-2 server were hosted in separate Oracle Solaris Containers bound to four processor sets to demonstrate consolidation of multiple applications, web servers and the database with best resource utilizations. Interrupt fencing was configured on all Oracle Solaris Containers to channel the interrupts to processors other than the processor sets used for the JD Edwards Application server, Oracle WebLogic servers and the database server. A Oracle WebLogic vertical cluster was configured on each WebServer Container with twelve managed instances each to load balance users' requests and to provide the infrastructure that enables scaling to high number of users with ease of deployment and high availability. The database log writer was run in the real time RT class and bound to a processor set. The database redo logs were configured on the raw disk partitions. The Oracle Solaris Container running the Enterprise Application server completed 61 Short UBEs, 4 Long UBEs concurrently as the mixed size batch workload. The mixed size UBEs ran concurrently from the Enterprise Application server with the 8,000 online users driven by the LoadRunner. See Also SPARC T4-2 Server oracle.com OTN JD Edwards EnterpriseOne oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Oracle Fusion Middleware oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 09/30/2012.

    Read the article

  • Top Tier, A-Game Talent - How to Land em'

    - by GeekAgilistMercenary
    Recently the question came up from a close friend of mine, "will my PhD help me attain a higher income in the north west?"  I had to tell him, that it might get him a little more, but it won't get him in the top income brackets for the occupation.  Another time, a few days later, someone else asked this too.  Then again, I see a job posting that requires a Bachelors Degree and some other nonsense.  The job posting even states they want "A-Game" talent. I am almost shocked at how poorly part of this industry doesn't realize how unimportant a degree is to getting real top tier, a-game talent.  (and yes, I get a little riled up about this matter) You Can't Make Good Software Developers.  No college out there is going to train someone to be in the top 10%, and absolutely not to be in the top 5% of skill levels.  Colleges can NOT do this.  It is up to the individual, and the individual alone.  If top tier talent seems to come from a college, one should check their premise and look at the motivations the individuals have to go to that school.  There is most likely a reason that top tier talent appears to be made there.  The college however, can only guide or assist, but I repeat that "top tier talent is a very individualistic endeavor". Some might say, well a group is needed, support is needed, this and that are needed.  True, an individual needs a support system and a college can provide that, but it generally ends there.  The support group helps, provides a sounding wall, and provides correlation to good ideas for the a-game top tier geek.  But again, the endeavor is the individuals desire. top tier talent is a very individualistic endeavor - Me Hiring Top Tier, A-Game Talent There are a few things when trying to hire this level of game player. The first thing is to not require a degree of any sort.  Sure, it looks good, but it won't dictate anything other than the individual was able to go through the regimented steps of college. List the skills and ideas that you would like to find in an individual.  Think of two people meeting for the first time, what do you want to know about the other individual.  Team fit is absolutely fundamental for top tier talent.  That support group that I mentioned above, top tier talent works best with a solid group of players. Keep your technology up to date, moving forward, and don't bore your top talent if you manage to get it.  If the company slows down, they will leave.  The more valuable they find out they are, the lower tolerance they'll have for this.  For managers, directors, and leaders in an organization this is THE challenge for them. Provide opportunities not just for advancement, but ways for them to advance their knowledge such as training, a book budget, or other means.  Even if some software they want to use isn't used ton the project, get it for them (within reason of course ? couple $100 or even a few $1000 for a good software license to MSDN, Tellerik, or other suite of software is ideal). Don't push them to, and don't let them overwork themselves into burnout.  This, as a leader in an organization is easy to do if one finds themselves actually hiring top talent.  Because top talent just provides results and more results.  But they are human, they will break, don't be the cause of that or you'll lose your talent. For now, that is it from me on this topic, back to the revenue, code, projects, and pushing forward. For the original entry, check out my personal blog with other juicy tech tidbits, rants, raves, and the like. Agilist Mercenary

    Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >