Search Results

Search found 25098 results on 1004 pages for 'usb network adapter'.

Page 104/1004 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

• Unable to connect to wireless network

  - by Mike

  A real newbie here. Just downloaded Ubuntu 12.10, put on USB stick and have booted it on my other PC after modifying the boot sequence to boot from USB before hard drive where Windows XP lives. Have no problems with Windows and my wireless but not with Ubuntu. The PC is a Dell Latitude D630 laptop. According to Windows XP , the wireless card is a Dell Wireless 1490 Dual Band WLAN Mini-Card, my IP address is 192.168.0.193, subnet mask is 255.255.255.0, assigned by DHCP, SSID is HOME , type 802.11 and default gateway is 192.168.0.1. Ok, back to booting from USB and TRY option, I am Editing Network connections, I have created/configured "Wireless connection 1" with SSID of HOME and the only other thing I have changed is on the "Editing IPV4 routes for Wireless connection 1 I have enterred 192.168.0.193 , netmask 255.255.255.0 and gateway 192.168.0.1 Anyways , no go. Could use some help. Thanks, Mike from Montreal

  Read the article

• Using 12.04 installation as a persistent pen drive

  - by Cawas

  Disclaimer: I aim to build a self contained pen drive with my application inside, so no matter about updates. Maybe I'm looking at the wrong linux distribution to do this... Please let me know if you think so. I've tried knoppix and even lubuntu, but they don't come with enough "drivers" for Unity3D to work. Creating a custom live persistent pen drive is a real pain and I'm trying for 1 day without any success. Sure, being able to do it would probably be ideal and occupy the minimum space. Using the installation image on a pen drive, however, is good enough and is really easy to create. We can even do it from any OS, using UNetBootin, LiLi USB Creator or some other methods. Straight forward. Some recommend installing it on a pen drive. But that requires a lot of space and, I believe, it won't behave as good as something meant to be installed on a usb disk, because of memory management. So, there are only a few negative points on using the installation image that I can think of. Question here, is how to remove those drawbacks: Having to press "Try Ubuntu". That's the big one. Couldn't find how. Unable to load everything on memory and keep on running without the pen drive (like this) Unable to remove "Install Ubuntu 12.04 LTS" app. Setting the ISO to use maximum amount of space for the OS will leave pen drive with zero space left and any file saved within it from ubuntu is inaccessible from the outside (when plugin the pen drive and not booting from it). Am I missing something? Can those points be fixed?

  Read the article

• 11.10 liveCD black screen

  - by Shaun Killingbeck

  Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

  Read the article

• Unable to mount USBDRIVE Error creating moint point: Permission denied

  - by steve

  Whenever I plug a usb into my computer a window pops up and says Unable to mount [Name of USB] Error creating moint point: Permission denied steve@goliath:/$ uname -a Linux goliath 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux steve@goliath:/$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f716ee1 Device Boot Start End Blocks Id System /dev/sda1 1 234441647 117220823+ ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f710ee1 Device Boot Start End Blocks Id System /dev/sdb1 1 2930277167 1465138583+ ee GPT Disk /dev/sdc: 16.0 GB, 16005464064 bytes 74 heads, 10 sectors/track, 42244 cylinders, total 31260672 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 31260671 15626304 c W95 FAT32 (LBA) steve@goliath:/$ sudo mkdir /media/external mkdir: cannot create directory `/media/external': Permission denied steve@goliath:/$ sudo mkdir /media/usb0 mkdir: cannot create directory `/media/usb0': Permission denied steve@goliath:/$ sudo ls -l / | grep media drwxr-xr-x 3 root root 4096 Oct 3 22:48 media steve@goliath:/$ ls /media/ -a . .. MediaShare MediaShare is the the directory on my server that has all my movies and music. If there is any information I left out please let me know.

  Read the article

• Why can't I boot from portable HD?

  - by user11239

  I've been trying to get Ubuntu 10.04-LTS 32-bit desktop installed onto a 250GB FreeAgent Go drive from Seagate. I've been able to install onto a USB flash drive and boot successfully from this. I have installed Ubuntu onto the jump drive using Universal USB Installer, and this was a total success in terms of getting Ubuntu to run off a flash drive. I was unable to accomplish this with the portable HDD. I then, following instructions, attempted to install the OS onto the HDD once booted up from the flash drive. After installing the OS on the HDD, the computer would simply not load the OS when the HDD medium was selected for booting from. However, as there is no System-> Preferences-> Removable Drives and Media I could not complete this step. Is this vital? How do I do this under Ubuntu 10.04? I have formmated the MBR on the HDD and repeated the above, still with no success. I have also browsed some forums that mention there may be something related to spin-up speeds, but nothing explained in detail the issue or how to solve it, and I'm not familiar enough with system booting to understand if this could be an issue. Basically, what I'm trying to do is get Ubuntu to boot off the HDD, I've attempted several things, and the result is, after selecting the HDD from BIOS, the OS never starts booting (after waiting upwards of ten minutes). I just have a white cursor blinking. I can always get it to boot from the jump drive. Related question

  Read the article

• Ubuntu 14.04 install fails with Via S3 UniChrome Pro graphics

  - by WizardNo.7

  I am trying to install Ubuntu 14.04 on a Fujitsu Siemens Amilo Pro laptop(it's quite old yes, has about 30GB Hard Drive and I think 192mb of RAM) which currently has Windows XP installed (which I'd like to keep for the time being). I have downloaded the 32-bit Desktop ISO and used unetbootin to create a Live USB for this laptop. When I boot from USB, I arrive at the unetbootin Grey and Blue menu and pick either "Try Ubuntu without installing", or "Install Ubuntu". The menu goes away and an Ubuntu loadscreen showing UBUNTU and four dots which progressively change between white and orange. At about the second color changing cycle a white underscore symbol appears next to the fourth dot and flickers. There is some leftover text from the kernel boot still visible, but there is no graphical desktop. After this I have to hard reboot or shut-down. $ lshw -c video *-display UNCLAIMED description: VGA compatible controller product: CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] Vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 32 bits clock: 66MHz capabilities: pm agp agp-2.0 vga_controller bus_master cap_list configuration: latency=64 mingnt=2 resources: memory:f0000000-f3ffffff memory:d1000000-d1ffffff

  Read the article

• Getting error - This application has failed to start because the application configuration is incorrect. Reinsta

  - by Kaye

  I am sorry if I am repeating this issue. But I am a layman and cant understand the answers posted. I want to do away with Windows XP Professional (I have lost the product key) that I have on an old desktop PC that is more than 7/8 years old. I didnt use the PC for a couple of years as this laptop was more convenient. Now I have started to use this PC but cannot download SP2 onto the PC as it keeps asking for product key and I dont remember where I wrote it down or where I kept it. So I downloaded Ubuntu 12.10 onto the desktop screen (about 753MB and 3 hours) and then used Unetbootin to put this on my pendrive. After completing the process, I have on my pendrive 9 folders, 3 text files, 1 autorun file, 1 ldlinux file, 1 wubi application file and 5 other files - total 20 items. Though on bootup I opted for USB boot, the boot-up opens into Windows. It simply bypasses the USB where ubuntu lies. What do I do? Am I doing things correctly. Pls explain in simple terms.

  Read the article

• b43 Firmware Error when trying to install Ubuuntu 14.04 on XP Laptop

  - by WizardNo.7

  I know I'm an Ubuntu and Linux n00b, but I've been browsing the web for a few days searching for a solution, and none of the other b43 posts etc solve my problem. I am trying to install Ubuntu 14.04 on a Fujitsu Siemens Amilo Pro laptop(It's quite old yes, has about 30GB Hard Drive and I think 192mb of RAM) which currently has Windows XP installed(which I'd like to keep for the time being). I have downloaded the 32-bit Desktop ISO and used unetbootin to create a Live USB for this laptop. When I boot from USB, I arrive at the unetbootin Grey and Blue menu and pick either "Try Ubuntu without installing", or "Install Ubuntu". The menu goes away and an Ubuntu loadscreen showing UBUNTU and four dots which progressively change between white and orange. At about the second color changing cycle a white underscore symbol appears next to the fourth dot and flickers, and then I get the usual: [ 95.514833] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found [ 95.514847] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found [ 95.514855] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all the instruction on this website. After this I have to hard reboot or shut-down. I don't have a previous Linux install so cannot do the apt-get from my previous install. I cannot access the boot options menu by using F6 or similar. Any ideas? Thanks beforehand!

  Read the article

• Installing 11.10 on flash drive failed

  - by lakshitha

  This is my problem. I burned Ubuntu 11.10 iso to a CD. I was able to boot my PC with it. I plugged in my flash drive, and inserted the CD and restarted the computer to boot Ubuntu. I then chose to install Ubuntu alongside with Windows (XP prof.). Then I was able to select my flash drive as the installation location. I prepared partitons by dragging a bar and allocating the size for the Ubuntu installation, and for other files. I set 3GB for ubuntu and 1GB for other files. The pen drive was partitioned and files installed on it. After sucess I ejected the CD to restart the PC to use the new OS. When it restarted I expected to be asked to select an OS to boot. But I could only boot with Windows XP. Properties of my flash drive show its total capacity is 1GB. The partitioned 3GB is missing. How can I boot with the USB stick? How can I get my 4GB USB stick back?

  Read the article

• Hyper-V Server 2012 - "No Active Network Adapter Found"

  - by Vazgen

  I just installed Hyper-V Server 2012 and first thing I get when logging in to the host is "No Active Network Adapter Found". I know I have to use the following command: pnputil –i –a <inf file> I found the Realtek Network Driver for my MB for Windows 7 here: http://za.asus.com/Motherboards/AMD_AM3Plus/M5A97_PRO/#download But there is not one for Windows 8 so I tried using the Win 7 one with PnPUtil, and I got: Failed to install the driver on any of the devices on the system: No more data is available. Does this really mean I can't use Hyper-V Server 2012 with my motherboard? This is hard to believe because I installed Windows Server 2012 directly (prior to installing Hyper-V Server 2012) on this same computer and I had internet access on that server without even configuring any drivers. Ok so I went to PowerShell from cmd and typed Get-NetIPConfiguration And it said the name of my driver (Realtek) and "Disconnected". I switched the Ethernet wire from my primary computer with my server and everything was fixed. Interestingly, my primary computer connects to the internet just fine with the wire that was previously in the server, just with much slower speed. Does anyone know what could be the difference between these 2 Ethernet wires?

  Read the article

• Cannot enable network discovery on Windows Server 2008 R2

  - by dariom

  I'm trying to enable the Network Discovery feature on a newly installed Windows Server 2008 R2 instance. The network connection is in the Home or Work profile (it is not domain joined). These are the steps I've followed: Within the Network and Sharing Center I select Change advanced sharing settings Then I select the Turn on network discovery option for the current network profile (Home or Work) I then click Save changes If I then go back to the Advanced sharing settings screen the Turn off network discovery option is selected and the machine is not visible to others within the Network node in Windows Explorer. Things I've checked: I can ping the server and connect to it using the machine name/IP address. The Windows Firewall has exceptions for Network Discovery for both Private and Public networks. File and Printer sharing is enabled and I can transfer files to/from the server by connecting to the server using a UNC path. What am I missing here?

  Read the article

• OS X 10.6 won't automatically connect to wireless even though remember network is checked

  - by Hendy

  Upgraded to 10.6 recently. 10.5 would connect to my home network whenever I was home. 10.6 constantly pops up the network selection dialog and asks me what network I want to join. I click my home network and the password is already entered (so it "remembers" the network). "Remember network" is checked... but it does it every time. How do I get 10.6 to connect to networks automatically whenever it sees them?

  Read the article

• How do I choose which Ethernet Adapter to bridge in VMPlayer

  - by Catherine MacInnes

  I am running vmplayer 3.1.0 on Ubuntu. The host machine has four ethernet adapters that are configured to run on four different subnets. I need to run four VMs each with a single ethernet adapter bridged onto a specific one of the physical ethernet adapters. Does anyone know how to do this? Am I simply exceeding the capabilities of vmplayer and have to go to one of the other vmware products, if so, which one. Note that I have no need to create additional VMs, these are VMs that are being given to me by companies that want us to develop software for their products.

  Read the article

• bond0 and xen = crash

  - by Rajat

  Bonding with xen 1 - Stop all guests. Reboot dom0 after running "chkconfig xend off" and "chkconfig xendomains off". 2 - Configure bond0 by enslaving eth0 and eth1 to it. I added the below two entries to /etc/modprobe.conf. alias bond0 bonding options bond0 mode=6,miimon=100 Content of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 USERCTL=no ONBOOT=yes MASTER=bond0 SLAVE=yes BOOTPROTO=none Content of /etc/sysconfig/network-scripts/ifcfg-bond0 DEVICE=bond0 IPADDR= NETMASK= ONBOOT=yes BOOTPROTO=static USERCTL=no Did "modprobe bond0" and "service network restart" after that. 3 - Edit /etc/xen/xend-config.sxp Change (network-script network-bridge) To (network-script 'network-bridge netdev=bond0') 4 - Start xend. "service xend start". 5 - chkconfig xend on. 6 - modprode bond0 7 - more /proc/net/bonding/bond0 8 - Create guest images as usual and bridge it to xenbr0. about config i did for my xen kernel rhel 5.3 after i reboot the host server i get in place bond0 get pbond0 and its get disconnect from network only i ping to my vm's on the host server any one have any idea why xen bond0 is acting like that or what is solutions to come out of pbond0 to bond0.

  Read the article

• Options for small windows network setup without dedicated server?

  - by Mitch

  I'm very weak on networking and hope someone can point me in the right direction: I have written some windows client/server software which incorporates a database which is located on a windows server. I have a test installation running at a customer's office where the server has a static IP address. In this case its easy for the clients to access the database because of the fixed IP address. Also, customers with network servers generally have specialist support staff to set up my software, so its not such a problem for me. However I also need to offer the software to customers who have small offices with less than 10 PCs and no dedicated network server. In this case I want the customer to be able to nominate one PC as the database "server" and install my software and have the clients access it. But in this situation I believe the "server" PC may not have a dedicated IP address. Q1: What is the best way to set this up simply and make it work? Can I reliably reference the "server" by using its name, or is there a way to assign dummy fixed IP addresses? Ideally this needs to be workable on small networks running a mixture of XP/Vista/Windows7 as my target market may well have mixed OSes etc. I guess this would be akin to home networking? Many thanks Mitch

  Read the article

• Windows XP Home Edition SP3 cant recognise PCMIA SD Card

  - by Pozo

  System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

  Read the article

• No network adapter drivers after Windows re-install

  - by Arno

  This is a pretty basic question. I got a PC (Packard Bell Easynote TK11-BZ-010BE) that had linux on it, so I thought, just delete the partition and its alright. Well, it wasn't. I went into grub recovery and couldn't do anything, so I re-installed windows again. Now the problem is that everything works expect my network adapter. When I go to device manager, I get that there aren't any driver's for it installed. But without internet, I can't install the so called driver finders. How should I solve this?

  Read the article

• Laptop freezes on Wireless Mouse Adapter attach/detach

  - by Sergiy Byelozyorov

  I am using Microsoft Wireless Notebook Optical Mouse 3000 with Toshiba Satellite Pro P300-1CG. Recently I have installed Windows 7 64-bit. Now once in a while when I plug-in or plug-out wireless mouse adapter, the computer freezes (image stays on the screen, but the computer is not responsive). I have noticed that it mostly happens after I recover my computer from sleep mode. To continue using laptop I have to shut it down by pressing and holding power button for 7 seconds and then booting it up again. What can be done to prevent this?

  Read the article

• Windows Server 2008 R2 Virtual Network Setup

  - by jpearl01

  Hi all, Some background: I'm very much new to networking in general, and virtualization in particular. I'm trying to set up a series of VMs as we are transitioning to a thin client setup. I have been supplied a limited number of static ip addresses. The server is located in an offsite building which houses the network we use to connect to the internet, share folders etc. The setup I've been trying to go for is this: The host OS (Windows Server 2008 R2) is bound to one nic using one of the static ips (say, Nic1 and ip 10.255.6.61). I've set up another external virtual network attached to another physical nic , and a virtual private network attached to no nic. There is one VM running the same os (as the host). This VM is connected to both the external virtual network (and uses another static ip say Nic2 and ip 10.255.6.62) and also to the virtual private network (I gave it a static random ip 192.168.88.1 subnet mask 255.255.255.0). This virtual private network is connected to all the other VMs. I'd like to share the internet connection with all the other VMs on the private virtual network, and so I installed the RRAS role on the server connected to Nic2, and selected the option to share the internet over the vpn. I've run through the RRAS wizard a few times, trying different configurations, but none of them seem to be letting the other vms connect to the 'net. The vms seem to connect to the virtual private network fine, they are assigned an ip address and everything, but no internet, and no rest of the network either. The other problem is in general I connect to the vms with RDP. Will that be possible with a setup like this? i.e. will the vms show up as computers on the network? If not, what are my other options? Thanks! ~josh

  Read the article

• Why are certain folders in my XP network share really, really slow?

  - by bikefixxer

  I have a workgroup set up with Windows XP. My file "server" is running XP Pro and the clients are running XP home. I've turned simple file sharing off on the server because certain clients need access to certain folders and not to others, and I want to keep it that way. Therefore, I've used the granular sharing/security settings to enable certain clients access to certain folders. I'm using the net use command in a batch file on the clients to add the share when they logon so it's always available via a mapped drive or a shortcut. On some clients "My Documents" points to the mapped drive, but all of the local and application settings stay local. Everything works well except for accessing a certain folder on the network. It contains a lot of random batch files and self-executable programs I use for diagnostics and what not, and nearly every time I open the folder the computer hangs for 15-60 seconds. This happens on every machine, including the server (but not nearly as often as the clients). I've searched high and low and cannot figure it out and it's driving me crazy. Here are all the things I've tried to no avail: Disabled firewall (XP) and anti-virus (ESET NOD32) Deleted any desktop.ini file I can find in the share Disabled "automatically search for network folders and printers" Disabled "remember each folder's view settings" Set HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer NoRecentDocsNetHood = 1 Tried with mapped drives and with UNC shortcuts Ran CHKDSK Removed Read-Only attribute from all folders (well, tried to remove, it always came back on with a half check) Added the server's static IP to the hosts file on the clients I've tried monitoring the server's performance to see if anything makes sense. Occasionally the issue coincides with a spike in pages/sec (memory) but not always. Other than that, everything else seems normal. The anti-virus would seem to be the most likely cause to me considering the batch files and what not, but it still hangs when it is completely disabled. I'm at a loss and if anyone can help me with this I'd greatly appreciate it!

  Read the article

• How to record tv to network share with Windows Media Center?

  - by Peterdk

  Well, you would think that Windows 7's new MediaCenter would be up to the task of recording your TV to a network share/drive. Too bad, it looks like it's just not possible. I have a windows 2008 R2 server, and a Windows 7 machine with a TV card. Since my server has 2TB of storage, it would be nice to record directly to it's networked drive. (I mounted it as Z:). I tried the following: Selecting it in Media Center Itself: Not working. Not available. Editing the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Service\Recording , setting RecordPath to Z:\TV. Not working. Editing the registry: setting RecordPath to \\server\TV. Not working. Creating a Symlink (mklink \D) to Z:\TV and \\server\TV and setting that in the registry as RecordPath. Currently I am out of options. I could ofcourse Install Windows7 on my server, but I have no license for that, and my windows 2008 r2 is free from dreamspark. Are there people that are succesfully recording to a networked drive/storage? edit I also need to mention that I need to be able to acces the stored files from other PC's, like my laptop. So iSCSI is great for recording, but it looks like you can't access iSCSI devices from multiple PC's. Looks like sharing a iSCSI device is out of the question, so: Are there workarounds to get this thing recording to my network drive?

  Read the article

• Windows Server 2008 R2 Virtual Network Setup

  - by jpearl01

  Some background: I'm very much new to networking in general, and virtualization in particular. I'm trying to set up a series of VMs as we are transitioning to a thin client setup. I have been supplied a limited number of static ip addresses. The server is located in an offsite building which houses the network we use to connect to the internet, share folders etc. The setup I've been trying to go for is this: The host OS (Windows Server 2008 R2) is bound to one nic using one of the static ips (say, Nic1 and ip 10.255.6.61). I've set up another external virtual network attached to another physical nic , and a virtual private network attached to no nic. There is one VM running the same os (as the host). This VM is connected to both the external virtual network (and uses another static ip say Nic2 and ip 10.255.6.62) and also to the virtual private network (I gave it a static random ip 192.168.88.1 subnet mask 255.255.255.0). This virtual private network is connected to all the other VMs. I'd like to share the internet connection with all the other VMs on the private virtual network, and so I installed the RRAS role on the server connected to Nic2, and selected the option to share the internet over the vpn. I've run through the RRAS wizard a few times, trying different configurations, but none of them seem to be letting the other vms connect to the 'net. The vms seem to connect to the virtual private network fine, they are assigned an ip address and everything, but no internet, and no rest of the network either. The other problem is in general I connect to the vms with RDP. Will that be possible with a setup like this? i.e. will the vms show up as computers on the network? If not, what are my other options? Thanks! ~josh

  Read the article

• Windows 7: Wi-Fi connection drops intermittently - only returns after "Troubleshoot connection" resets the adapter

  - by sleske

  On our laptop (running Windows 7) the Wi-Fi connection drops intermittently. Symptoms: Connectivity is suddenly lost, and the "signal strenght" indicator in the tray shows zero strength and a yellow "star" symbol. What happens then: The problem does not resolve itself by just waiting. If I click on the tray icon, the "Windows network diagnostics" wizard pops up and tells me that there is a networking problem (duh). If I click on the "repair" button (not sure about the wording), the wizard works for a while, then reports that it has reset the network adapter. Then Wi-Fi works again. While the above procedure has worked every time so far, it is very annoying. It takes 10-20s to repair the connection, and in the meantime downloads, video streams etc. may have been aborted. Some more details: The problem occurs without any apparent regularity, but usually a few minutes after powerup (though not every time). It happens frequently enough to be annoying. It is unlikely to be a router problem - another laptop running at the same time usually has no Wi-Fi problems. I am at a loss about what to try to troubleshoot this. Any ideas? Computer: Acer Aspire 7739Z. Wi-Fi card: Atheros AR5B125

  Read the article

• How do I get a network printer installed in ubuntu 9.04?

  - by SoaperGEM

  My girlfriend's work computer now has Linux on one of the partitions, and for the most part it's running fine--except that I can't seem to get the network printers configured right. There are two of them: a Lanier MP 7500/LD275 and a Lanier MP C3000/LD430c, and Linux seems to have found them both automatically. I'll go through the steps of what I did, and what exactly went wrong. I went to Administration Printing, and clicked the new printer button. It searched for printers and found them both, listed under "Network Printers." I added them as new printers in succession. However, when I clicked "Print a Test Page," it failed saying there was a broken pipe. The device URIs were saved as socket://[ip address]:9100. I changed these to lpd://[ip address] per some online tutorial, which at first looked like it might have worked (but didn't). Then when I tried to print a test page, it first said Processing (and sometimes even Processing - printing test page, 4%, but always subsequently displays Idle - /usr/lib/cups/backend/lpd failed. Help! What do I do? It seems like Linux can find these printers just fine, and the drivers seem to be in place, so what's going wrong?

  Read the article

• How to connect computers to a network printer behind a router?

  - by kokbira

  General question: How to connect computers to an IP printer behind a router? Particular question: How to connect C-1 and C-2 to PRI? What? Where? [ISP] | | -> IPs:200.X.X.X/other configs:DC | [R-1] | | -> IPs:10.1.X.X locked by MAC,M:255.0.0.0,G:10.1.0.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [PRI] IP:10.1.7.7 [R-2] IP: 10.1.0.1,MAC:A | | -> IPs:192.168.1.X,M:255.255.255.0,G:192.168.1.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [C-1] IP:192.168.1.2 [C-2] IP:192.168.1.3,MAC:A Glossary and details: ------------------------------------------------------------------------------------ - IP: IP. - IPs: Some IP range. - M: Mask. - G: Gateway. - MAC:A: A MAC address that I will not inform you :) - DC: Don't care. - ISP: Internet Service Provider (not so much details about it on that case). - R-1: A real router or some concatenated so IP range bellow that block is 10.1.X.X and above is ISP. The provided IPs are provided by MAC. As all available addresses are in use, you must clone an existing one to join with a new device (and to disconnect the cloned one). - PRI: An network printer (some people here call that IP printer). - R-2: A TP-LINK TL-WR340G, mine wireless router (since my computer does not have ethernet input, it is my ethernet-wifi adapter :), admin access, MAC address cloned from C-2 (MAC:A). I've to configure 10.0.1.1 and 10.0.1.2 as DNS addresses, other wise I cannot connect C-1 and C-2 to Internet. - C-1: My computer, a CCE XLE-425 (remember: no ethernet input), with Windows 7, admin access. - C-2: another computer with better configs than mine, MAC:A, Windows XP. Requirements: I want to print, to access Internet and to do it myself (no need to call network admin men in black people). Pay attention to MAC clones and DNS info.

  Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >