Search Results

Search found 20360 results on 815 pages for 'capture output'.

Page 105/815 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• Can not get sound over hdmi in kubuntu 9.10

  - by user32509

  I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

  Read the article

• Convert video from .mp4 to .ogg

  - by Unknown

  I am using ffmpeg version 0.11.1 Copyright (c) 2000-2012 the FFmpeg developers . I need to convert a file .mp4, to .ogg format. I am on Mac OS X, and I have tried this so far: ffmpeg -i sample_mpeg4.mp4 -acodec vorbis -vcodec libtheora -f ogg output.ogv I am getting: Unknown encoder 'libtheora' ffmpeg -i sample_mpeg4.mp4 -acodec libvorbis -vcodec --enable-libtheora output.ogv I am getting: Unknown encoder '--enable-libtheora' ffmpeg -i sample_mpeg4.mp4 -acodec libvorbis -vcodec libtheora -f ogv output.ogv I am getting: [NULL @ 0x7f81bb00f800] Requested output format 'ogv' is not a suitable output format output.ogv: Invalid argument ffmpegtheora is not an option as it can not be install on the server.

  Read the article

• Knight movement.... " how to output all possible moves. "

  - by josh kant

  The following is the code i wrote.. I have to write it for nXn but for easyness i tried to test it for 5X5. It does not display my output... could anybody tell me whats wrong with the following code: { #include <iostream> #include <iomanip> using namespace std; void knight ( int startx, int starty, int n, int p[][5], int used [][5], int &count); int main ( ) { const int n = 5; // no. of cloumns and rows int startx = 0; int starty = 0; int p[5][5]; int used[5][5]; int count = 1; int i= 0; int j = 0; //initializing the array for ( i = 0; i < 5; i++) { for ( j = 0; j < 5; j++) { p[i][j] = 0; used [i][j] = 0; } } //outputting the initialized array.. i=0; while ( i< 5) { for ( j = 0; j < 5; j++) { cout << setw(3) << p[i][j]; } i++; cout << endl; } knight (startx,starty,n,p,used,count); return 0; } void knight ( int x, int y, int n, int p[][5], int used [][5], int &count) { int i = 0; //knight (x,y,n,p,used,count) for ( i = 0; i < n*n; i++) { if ( used [x][y] == 0 ) { used[x][y] = 1; // mark it used; p[x][y] += count; //inserting step no. into the solution //go for the next possible steps; //move 1 //2 squares up and 1 to the left if (x-1 < 0 && y+2 < n && p[x-1][y+2] == 0) { used[x-1][y+2] = 1; p[x-1][y+2] += count; knight (x-1,y+2,n,p,used,count); used[x-1][y+2] = 0; } //move 2 //2 squares up and 1 to the right if ( x+1 < n && y+2 < n && p[x+1][y+2] == 0 ) { used[x+1][y+2] = 1; p[x+1][y+2] += count; knight (x+1,y+2,n,p,used,count); used[x+1][y+2] = 0; } //move 3 //1 square up and 2 to the right if ( x+2 < n && y+1 < n && p[x+2][y+1] == 0 ) { used[x+2][y+1] = 1; p[x+2][y+1] += count; knight (x+2,y+1,n,p,used,count); used[x+2][y+1] = 0; } //move 4 //1 square down and 2 to the right if ( x+2 < n && y-1 < n && p[x+2][y-1] == 0 ) { used[x+2][y-1] = 1; p[x+2][y-1] += count; knight (x+2,y-1,n,p,used,count); used[x+2][y-1] = 0; } //move 5 //2 squares down and 1 to the right if ( x+1 < n && y-2 < n && p[x+1][y-2] == 0 ) { used[x+1][y-2] = 1; p[x+1][y-2] += count; knight (x+1,y-2,n,p,used,count); used[x+1][y-2] = 0; } //move 6 //2 squares down and 1 to the left if ( x-1 < n && y-2 < n && p[x-1][y-2] == 0 ) { used[x-1][y-2] = 1; p[x-1][y-2] += count; knight (x-1,y-2,n,p,used,count); used[x-1][y-2] = 0; } //move 7 //1 square down and 2 to the left if ( x-2 < n && y-1 < n && p[x-2][y-1] == 0 ) { used[x-2][y-1] = 1; p[x-2][y-1] += count; knight (x-2,y-1,n,p,used,count); used[x-2][y-1] = 0; } //move 8 //one square up and 2 to the left if ( x-2 < n && y+1< n && p[x-2][y+1] == 0 ) { used[x-2][y+1] = 1; p[x-2][y+1] += count; knight (x-2,y+1,n,p,used,count); used[x-2][y+1] = 0; } } } if ( x == n-1 && y == n-1) { while ( i != n) { for ( int j = 0; j < n; j++) cout << setw(3) << p[i][j]; i++; } } } Thank you!!

  Read the article

• UPDATE FOR BI PUBLISHER ENTERPRISE 10.1.3.4.1 MARCH 2010

  - by Tim Dexter

  Latest roll up patch for 10.1.3.4.1 is now out in the wild. Yep, there are bug fixes but the guys have implemented some great enhancements. I'll be covering some of them over the coming weeks, from collapsing bookmarks in your PDFs to better MS AD support to 'true' Excel templates, yes you read that correctly! Patch is available from Oracle's support site. Just search for patch 9546699. Here's the contents and readme, apologies for the big list but at least you can search against it for a particular fix. This patch contains backports of following bugs for BI Publisher Enterprise 10.1.3.4.0 and 10.1.3.4.1. 6193342 - REG:SAMPLE DATA FILE FOR PDF FORM MAPPING IS NOT VALIDATED 6261875 - ERRONEOUS PRECISION VALIDATION ON ONLINE ANALYZER 6439437 - NULL POINTER EXCEPTION WHEN PROCESSING TABLE OF CONTENT 6460974 - BACS EFT PAYMENT INSTRUCTION OUTPUT FILE IS EMPTY 6939721 - BIP: REPORT BUSTING DELIVERY KEY VALUES CANNOT CONTAIN SEVERAL SPECIAL CHARACTER 6996069 - USING XML DB FOR BI REPOSITORY FAILS WITH RESOURCENOTFOUNDEXCEPTION 7207434 - TIMEZONE:SHOULD NOT DO TIMEZONE CONVERSION AGAINST CANONICAL DATE YYYY-MM-DD 7371531 - SUPPORT FOR CSV OUTPUT FOR STRUCTURED XML AND NON SQL DATA SOURCES 7596148 - ER: LDAP FOR MS AD TO SEARCH FROM AD ROOT 7646139 - WEBSERVICES ERROR 7829516 - BIP STANDALONE FAILS TO BURST USING XSL-FO TEMPLATES 8219848 - PDF TEMPLATE REPORT NOT PERFORMING PAGE BREAK 8232116 - PARAMETER VALUE IS PASSED AS NULL,IF IT CONTAINS 'AND' WITHIN THE STRING 8250690 - NOT ABLE TO UPLOAD TEMPLATE VIA BIP API 8288459 - ER: QUERY BUILDER OPTION TO NOT INCLUDE TABLENAME. PREFIX IN SQL 8289600 - REPORT TITLE AND DESCRIPTION CAN'T SUPPORT MULTIPLE LANGUAGES 8327080 - CAN NOT CONFIGURE ORACLE EBUSINESS SUITE SECURITY MODEL WITH ORACLE RAC 8332164 - AN XDO PROPERTY TO ENABLE DEBUG LOGGING 8333289 - WEB SERVICE JOBS FAIL AFTER BIP STARTED UP 8340239 - HTTP NOTIFY IS MISSING IN SCHEDULEREPORTREQUEST 8360933 - UNABLE TO USE LOGGED IN BI USER AS THE WSSECURITY USERNAME IN A VARIABLE FORMAT 8400744 - ADMINISTRATOR USER DOES NOT HAVE FULL ADMINISTRATOR RIGHTS 8402436 - CRASH CAUSED BY UNDETERMINED ATTRKEY ERROR IN MULTI-THREADED 8403779 - IMPOSSIBLE TO CONFIGURE PARAMETER FOR A REPORT 8412259 - PDF, RTF OUTPUT NOT HANDLING THE TABLE BORDER AND CONTENT OVERFLOWS TO NEXT PAGE 8483919 - DYNAMIC DATASOURCE WEBSERVICE SHOULD WORK WITH SERVERSIDE CONNECTIONS 8444382 - ID ATTRIBUTE IN TITLE-PAGE DOES NOT WORK WITH SELECTACTION PROPERTY 8446681 - UI LANGUAGE IS NOT REFLECTED AT THE FIRST LOG IN 8449884 - PUBLICREPORTSERVICE FAILS ON EMAIL DELIVERY USING BIP 10.1.3.4.0D+ - NPE 8454858 - DB: XMLP_ADMIN CAN SEE ALL THE FOLDERS BUT ONLY HAS VIEW PERMISSIONS 8458818 - PDFBOOKBINDER FAILS WITH OUTOFMEMORY ERROR WHEN TRYING TO BIND > 1500 PDFS 8463992 - INCORRECT IMPLEMENTATION OF XLIFF SPECIFICATION 8468777 - BI PUBLISHER QUERY BUILDER NOT LOADING SCHEMA OBJECTS 8477310 - QUERY BUILDER NOT WORK WITH SSL ON STANDALONE OC4J 8506701 - POSITIVE PAY FILE WITH OPTIONS NOT CREATING FILE CHECKS OVER 2500 8506761 - PERFORMANCE: PDFBOOKBINDER CLASS TAKES 4 HOURS TO BIND 4000 PAGES 8535604 - NPE WHEN CLICKING "ANALYZER FOR EXCEL" BUTTON IN ALL_* REPORTS 8536246 - REMOVE-PDF-FIELDS DOES NOT WORK WITH CHECKBOXES WITH OPT ARRAY 8541792 - NULLPOINTER EXCEPTION WHILE USING SFTP PROTOCOL 8554443 - LOGGING TIME STAMP IN 10G: THE HOUR PART IS WRONG 8558007 - UNABLE TO LOGIN BIP WITH UNPRIVILEGED USER WHEN XDB IS USED FOR REPORSITORY STOR 8565758 - NEED TO CONNECT IMPERSONATION TO DATA SOURCE WITH PL/SQL FUNCTION 8567235 - EFTPROCESSOR AND XDO DEBUG ENABLED CAUSES ORG.XML.SAX.SAXPARSEEXCEPTION 8572216 - EFTPROCESSOR NOT THREAD SAFE - CAUSING CORRUPTED REPORTS TO BE GENERATED 8575776 - LANDSCAPE REPORT ORIENTAION NOT SELECTED WHEN REPORT IS PRINTED WITH PS 8588330 - XLIFF GENERATING WITH WRONG MAXWIDTH ATTRIBUTE IN SOME TRANS-UNITS 8584446 - EFTGENERATOR DOES NOT USE XSLT SCALABILITY - JAVA.LANG.OUTOFMEMORY EXCEPTION 8594954 - ENG: BIP NOTIFY MESSAGE BECOMES ENGLISH 8599646 - ER:EXTRA SPACE ADDED BELOW IMAGE IN A TABLE CELL OF TEMPLATE IN FIREFOX 8605110 - PDFSIGNATURE API ENCOUNTERS JAVA.LANG.NULLPOINTEREXCEPTION ON PDF WITH WATERMARK 8660915 - BURSTING WITH DATA TEMPLATE NOT WORKING WITH OPTION: VALUE=FALSE 8660920 - ER: EXTRACT XHTML DATA USING XDODTEXE IN XHTML FORMAT 8667150 - PROBLEM WITH 3RD APPLICATION ABOUT PDF GENERATED WITH BI PUBLISHER 8683547 - "CLICK VIEW REPORT BUTTON TO GENERATE THE REPORT" MESSAGE IS DISPLAYED 8713080 - SEARCH" PARAMETER IS NOT SHOWING NON ENGLISH DATA IN INTERNET EXPLORER 8724778 - EXCEL ANALYZER PARAMETERS DO NOT WORK WITH EXCEL 2007 8725450 - UIX 2.3.6.6 UPTAKE FOR 10.1.3.4.1 8728807 - DYNAMIC JDBC DATA SOURCE WITH PRE-PROCESS FUNCTION BASED ON EXISTING DATA SOURCE 8759558 - XDO TEMPLATE SHOWS CURRENCY IN WRONG FORMAT FOR DUNNING 8792894 - EFTPROCESSOR DOES NOT SUPPORT XSL TEMPLATE AS INPUTSTREAM 8793550 - BIP GENERATES CSV REPORTS OUTPUT FORMAT WITH EXTENTION .OUT NOT .CSV IN EMAIL 8819869 - PERIOD CLOSE VALUE SUMMARY REPORT (XML) RUNNING INTO WARNING 8825732 - MY FOLDERS LINK BROKEN WITH USER NAME THAT INCLUDES A SLASH (/) OBIEE SECURITY 8831948 - TRYING TO GENERATE A SCATTER PLOT USING THE CHART WIZARD 8842299 - SEEDED QUERY ALWAYS RETURNS RESULTS BASED ON FIRST COLUMN 8858027 - NODE.GETTEXTCONTEXT() NOT AVAILABLE IN 10G UNDER OC4J 8859957 - REPORT TITLE ALIGNMENT GOES BAD FOR REPORTS WITH XLIFF FILE ATTACHED 8860957 - ER: IMPROVE PERFORMANCE OF ANSWERS PARAMETERS 8891537 - GETREPORTPARAMETERS WEB SERVICE API ISSUES WITH OAAM REPORTS 8891558 - GETTING SQLEXCEPTION IN GENERATEREPORT WEB SERVICE API ON OAAM REPORTS 8927796 - ER: DYANAMIC DATA SOURCE SUPPORT BY DATA SOURCE NAME 8969898 - BI PUBLISHER WEB SERVICE GETREPORTPARAMETERS DOES NOT TRANSLATE PARAMETER LABEL 8998967 - MULTIPLE XSL PREDICATES ELEMENT[A='A'] [B='B'] CAUSES XML-22019 ERROR 9012511 - SCALABLE MODE IS NOT WORKING IN XMLPUBLISHER 10.1.3.4 9016976 - ER: PRINT XSL-T AND FOPROCESSING TIMING INFORMATION 9018580 - WEB SERVICE CALL FAILS WHEN REPORT INCLUDES SEARCH TYPE 9018657 - JOB FAILS WHEN LOV QUERY CONTAINS BIND VARIABLES :XDO_USER_UI_LOCALE 9021224 - PERFORMANCE ISSUE TO VIEW DASHBOARD PAGE WITH BIP REPORT LINKS 9022440 - ER: SUPPORT "COMB OF N CHARACTERS" FEATURE PDF FORM TEXT FIELDS 9026236 - XPATH DOES NOT WORK CORRECTLY IN 10.1.3.4.1 9051652 - FILE EXTENSION OF CSV OUTPUT IS TXT WHEN IT IS EXPORTED FROM REPORT VIEWER 9053770 - WHEN SENDING CSV REPORT OUTPUT BY EMAIL SOMETIMES IT IS SENT WITHOUT EXTENSION 9066483 - PDFBOOKBINDER LEAVE SOME TEMPORARY FILES AFTER MERGING TITLE PAGE OR TOC 9102420 - USE RELATIVE PATHS IN HYPERLINKS 9127185 - CHECKBOX NOT WORK ON SUB TEMPLATE 9149679 - BASE URL IS NOT PASSED CORRECTLY 9149691 - PROVIDE A WAY TO DISABLE THE ABILITY TO CREATE SCHEDULED REPORT JOB "PUBLIC" 9167822 - NOTIFICATION URL BREAKS ON FOLDER NAMES WITH SPACES 9167913 - CHARTS ARE MISSING IN PDF OUTPUTS WHEN THE DEFAULT OUTPUT FORMAT IS NOT A PDF 9217965 - REPORT HISTORY TAKES LONG TIME TO RENDER THE PAGE 9236674 - BI PUBLISHER PARAMETERS DO NOT CASCADE REFRESH AFTER SECOND PARAMETER 9283933 - OPTION TO COLLAPSE PDF OUTPUT BOOKMARKS BY DEFAULT 9287245 - SAVE COMPLETED SCHEDULED REPORTS IN ITS REPORT NAME AND NOT IN A GENERIC NAME 9348862 - ADD FEATURE TO DISABLE THE XSLT1.0-COMPATIBILITY IN RTF TEMPLATE 9355897 - ER: NEED A SAFE DIVIDE FUNCTION 9364169 - UIX 2.3.6.6 PATCH UPTAKE FOR 10.1.3.4.1 9365153 - LEADING WHITESPACE CHARACTERS IN A FIELD TRIMMED WHEN RUN VIEW OR EXPORT TO .CSV 9389039 - LONG TEXT IS NOT WRAPPED PROPERLY IN THE AUTOSHAPE ON RTF TEMPLATE 9475697 - ENH: SUB-TEMPLATE:DYNAMIC VARIABLE WITH PARAMETER VALUE IN CALL-TEMPLATE CLAUSE 9484549 - CHANGE DEFAULT FOR "XSLT1.0-COMPATIBILITY" TO FALSE FOR 10G 9508499 - UNABLE TO READ EXCEL FILE IF MORE THAN 1800 ROWS GENERATED 9546078 - EMAIL DELIVERY INFORMATION SHOULD NOT BE SAVED AND AUTO-FED IN JOB SUBMISSION 9546101 - EXCEPTION OCCURS WHEN SFTP/FTP REMOTE FILENAME DOSE NOT CONTAIN A SLASH '/' 9546117 - SFTP REPORT DELIVERY FAILS WITH NO CLASS DEF FOUND EXCEPTION ON WEBLOGIC 9.2 Following bugs are included in 10.1.3.4.1 and they are only applied to 10.1.3.4.0. 4612604 - FROM EDGE ATTRIBUTE OF HEADER AND FOOTER IS NOT PRESERVED 6621006 - PARAMNAMEVALUE ELEMENT DEFINITION SHOULD HAVE PARAMETER TYPE 6811967 - DATE PARAMETER NOT HANDLING DATE OFFSET WHEN PASSED UPPERCASE Z FOR OFFSET 6864451 - WHEN BIP REPORTS TIMEOUT, THE PROCESS TO LOG BACK IN IS NOT USER FRIENDLY 6869887 - FUSION CURRENCY BRD:4.1.4/4.1.6 OVERRIDINDG MASK /W XSLT._XDOCURMASKS /W SYMBOL 6959078 - "TEXT FIELD CONTAINS COMMA-SEPARATED VALUES" DOESN'T WORK IN CASE OF STRING 6994647 - GETTING ERROR MESSAGE SAYING JOB FAILED EVEN THOUGH WORKS OK IN BI PUBLISHER 7133143 - ENABLE USER TO ENTER 'TODAY' AS VALUE TO DATE PARAMETER IN SCHEDULE REPORT UI 7165117 - QA_BIP_FUNC:-CLOSED LIFE TIME REPORT ERROR MESSAGE IN CMD 7167068 - LEADER-LENGTH OR RULE-THICKNESS PROPRTY IS TOO LARGE 7219517 - NEED EXTENSION FUNCTIONS TO URL ENCODE TEXT STRING. 7269228 - TEMPLATEHELPER PRODUCES A GARBLED OUTPUT WHEN INVOKED BY MULTIPLE THREADS 7276813 - GETREPORTPARAMETERSRETURN ELEMENT SHOULD HAVE DEFAULT VALUE 7279046 - SCHDEULER:UNABLE TO DELETE A JOB USING API 7280336 - ER: BI PUBLISHER - SITEMINDER SUPPORT - GENERIC NON-ORACLE SSO SUPPORT 7281468 - MODIFY SQL SERVER PROPERTIES TO USE HYP DATA DIRECT IN JDBCDEFAULTS.XML 7281495 - PLEASE ADD SUPPORTED DBS TO JDBCDEFAULT.XML AND LIST EACH DB VERSION SEPARATELY 7282456 - FUSION CURRENCY BRD 4.1.9.2: CURRENCY AMOUTS SHOULD NOT BE WRAPPED. MINUS SIGN 7282507 - FUSION CURRENCY BRD4.1.2.5:DISPLAY CURRENCY AND LOCALE DERIVED CURRENCY SYMBOL 7284780 - FUSION CURRENCY BRD 4.1.12.4 CORRECTLY ALIGN NEGATIVE CURRENCY AMOUNTS 7306874 - OPP ERROR - JAVA.LANG.OUTOFMEMORYERROR: ZIP002:OUTOFMEMORYERROR, MEM_ERROR 7309596 - SIEBELCRM: BIP ENHANCEMENT REQUEST FOR SIEBEL PARAMETERIZATION 7337173 - UI LOCALE IS ALWAYS REWRITTEN TO EN WHEN MOVE FROM DASHBOARD 7338349 - REG:ANALYZER REPORT WITH AVERAGE FUNCTION FAIL TO RUN FOR NON INTERACTIVE FORMAT 7343757 - OUTPUT FORMAT OF TEMPLATES IS NOT SAVING 7345989 - SET XDK REPLACEILLEGALCHARS AND ENHANCE XSLTWRAPPER WARNING 7354775 - UNEXPECTED BEHAVIOR OF LAYOUT TEMPLATE PARAMETER OF RUNREPORT WEBSERVICES API 7354798 - SEQUENCE ORDER OF PARAMETERS FOR THE RUNREPORT WEBSERVICES API 7358973 - PARALLEL SFTP DELIVERY FAILS DUE TO SSHEXCEPTION: CORRUPT MAC ON INPUT 7370110 - REGN:FAIL WHEN USE JNDI TO XMLDB REPORT REPOSITORY 7375859 - NEW WEBSERVICE REQUIRED FOR RUNREPORT 7375892 - REQUIRE NEW WEBSERVICE TO CHECK IF REPORTFOLDER EXISTS 7377686 - TEXT-ALIGN NOT APPLIED IN PDF IN HEBREW LOCALE 7413722 - RUNREPORT API DOES NOT PASS BACK ANY GENERATED EXCEPTIONS TO SCHEDULEREPORT 7435420 - FUSION CURRENCY: SUPPORT MICROSOFT(JAVA) FORMAT MASK WITH CURRENCY 7441486 - ER: ADD PARAMETER FOR SFTP TO BURSTING QUERY 7458169 - SSO WITH OID LDAP COULD NOT FETCH OID ROLES 7461161 - EMAIL DELIVERY FAILS - DELIVERYEXCEPTION: 0 BYTE AVAILABLE IN THE GIVEN INPU 7580715 - INCORRECT FORMATTING OF DATES IN TIMEZONE GMT+13 7582694 - INVALID MAXWIDTH VALUE CAUSES NLS FAILURES 7583693 - JAVA.LANG.NULLPOINTEREXCEPTION RAISED WHEN GENERATING HRMS BENEFITS PDF REPORT 7587998 - NEWLY CREATED USERS IN OID CANT ACCESS REPORTS UNTILL BI PUBLISHER IS RESTARTED 7588317 - TABLE OF CONTENT ALWAYS IN THE SAME FONT 7590084 - REMOVING THE BIP ENTERPRISE BANNER BUT KEEPING THE REPORTS & SCHEDULES TAB 7590112 - SOMEONE NOT PRIVILEGED ACCESS BIP DIRECTLY SHOULD GET A CUSTOM PAGE 7590125 - AUTOMATING CREATION OF USERS AND ROLES 7597902 - TIMEZONE SUPPORT IN RUNREPORT WEBSERVICE API 7599031 - XML PUBLISHER SUM(CURRENT-GROUP()) FAILS 7609178 - ISSUE WITH TAGS EXTRACTED FROM RTF TEMPLATE 7613024 - HEADER/FOOTER SETTINGS OF RTF TEMPLATE ARE NOT RETAINING IN THE RTF OUTPUT 7623988 - ADD XSLT FUNCTION TO PRINT XDO PROPERTIES 7625975 - RETRIEVING PARAMETER LOV FROM RTF TEMPLATE 7629445 - SPELL OUT A NUMBER INTO WORDS 7641827 - ANALYTICS FROZED AFTER PAGE TAB WHICH INCLUDES [BI PUBLISHER REPORT] WERE CLICKE 7645504 - BIP REPORT FROZED AFTER THE SAME DASHBOARD BIP REPORTS WERE CLICKED SIMULTANEOUS 7649561 - RECEIVE 'TO MANY OPEN FILE HANDLES' ERROR CAUSING BI TO CRASH 7654155 - BIP REMOVES THE FIRST FILE SEPARATOR WHEN RE-ENTER REPOSITORY LOCATION IN ADMIN 7656834 - NEED AN OPTION TO NOT APPEND SCHEMA NAME IN GENERATED QUERY 7660292 - ER: XDOPARSER UPGRADE TO XDK 11G 7687862 - BIP DATA EXTRACTING ENHANCEMENT FOR SIEBEL BIP INTEGRATION 7694875 - ADMINISTRATOR IS SUPER USER WHETHER CONFIGURED MANDATORY_USER_ROLE OR NOT 7697592 - BI PUBLISHER STRINGINDEXOUTOFBOUNDSEXCEPTION WHEN PRINTING LABEL FROM SIM 7702372 - ARABIC/ENGLISH NUMBER/DATE PROBLEM, TOTAL PAGE NUMBER NOT RENDERED IN ENGLISH 7707987 - OUTOFMEMORY BURSTING A BI PUBLISHER REPORT BI SERVER DATA SOURCE 7712026 - ER: CHANGE CHART OUTPUT FORMAT TO PNG IN HTML OUTPUT 7833732 - THE 'SEARCH' PARAMETER TYPE CANNOT BE USED IN IE6 UNDER WINDOWS 8214839 - ER: INCREASE COLUMN SIZE IN SCHEDULER TABLE XMLP_SCHED_JOB 8218271 - ISSUES WHILE CONVERTING EXCEL TO XML 8218452 - BI PUBLISHER STANDALONE : GRAPHICS WITHOUT COLORS IF MORE THAN 33 PAGES 8250980 - USER WITH XMLP_ADMIN RESPONSIBILITY IS NOT ABLE TO EDIT REPORT IN BIP 8262410 - IMPOSSIBLE TO PRINT PDF CREATED BY BI PUBLISHER VIA 3RD PARTY PDF APPLICATION 8274369 - QA: CANNOT DELETE EMAIL SERVER UNDER DELIVERY CONFIGURATION 8284173 - FO:VISIBILITY="HIDDEN" DOESN'T WORK WITH FO:PAGE-NUMBER-CITATION 8288421 - THE VALUE OF VIEW BY GO BACK TO MY HISTORY IN SCHEDULES TAB 8299212 - REG: THE SPECIFICAL BI USER DIDN'T GET THE CORRECT REPORT HISTORY 8301767 - ORA-01795 ERROR OCCURED AFTER ACCESSING DASHBOARD PAGE WHICH INCLUDES BIP 8304944 - ADD SIEBEL SECURITY MODEL IN BI PUBLISHER 10.1.3.4.1 8312814 - QA:HOT:OBI SERVER JDBC DRIVER BIJDBC14.JAR IN XMLPSERVER.WAR IS INCORRECT 8323679 - BI PUBLISHER SENDS HTML REPORT TO OUTLOOK CLIENT AS ATTACHMENT NOT INLINE 8370794 - HISTORY OF COMPLETED SCHEDULER JOBS STILL SHOW ONE AS RUNNING ON CLUSTER ENV 8390970 - OUT OF MEMORY EXCEPTION RAISED, WHILE SAVING THE DATA 8393681 - CHECKBOX IS SHOWING UP AS CHECKED WHEN DATA IS NOT CHECKED VALUE 8725450 - UIX 2.3.6.6 UPTAKE FOR 10.1.3.4.1 UIX fixes: 6866363 - SUPPORT FOR JAVA DATE FORMAT AS PER JDK 1.4 AND ABOVE 6829124 - DATE PARAMETER NOT HANDLING DATE OFFSET AS PER JAVA STANDARDS ---------------------------- INSTALLATION FOR ENTERPRISE ---------------------------- Upgrade from 10.1.3.4.0d (patch 8284524, 8398280) and 10.1.3.4.1 does not require step 8 and step 9. 1 - Make a backup copy of the xmlp-server-config.xml file located in <application installation>/WEB-INF/ directory, where your application server unpacked the BI Publisher war or ear file. Example: In an Oracle AS/OC4J 10.1.3 deployment, the location is <ORACLE_HOME>/j2ee/home/applications/xmlpserver/xmlpserver/WEB-INF/xmlp-server-config.xml 2 - Back up all the directories under the BI Publisher repository (for example: {Oracle_Home}/xmlp/XMLP). 3 - If you are using Scheduling, back up your existing BI Publisher Scheduler schema. 4 - Shut down BI Publisher. 5 - Undeploy the BI Publisher application ("xmlpserver") from your J2EE application server. See your application server documentation for instructions how to undeploy an application. 6 - Deploy the 10.1.3.4 xmlpserver.ear or xmlpserver.war to your application server. See "Manually Installing BI Publisher to Your J2EE Application Server" secition of BI Publisher Installation Guide for guidelines for your application server type. 7 - Copy the saved backup copy of the xmlp-server-config.xml file from step 1 to the newly created BI Publisher <application installation>/WEB-INF/ directory, where your application server unpacked the BI Publisher war or ear file. Example: In an Oracle AS/OC4J 10.1.3 deployment, the location is <ORACLE_HOME>/j2ee/home/applications/xmlpserver/xmlpserver/WEB-INF/xmlp-server-config.xml 8 - Copy ssodefaults.xml to the following directory. And replace [host]:[port] with your server's information. Default values for other properties can be updated depending on your configuration. <Existing Repository>\XMLP\Admin\Security 9 - Copy database-config.xml to the following directory. <Existing Repository>\XMLP\Admin\Scheduler 10 - Restart xmlpserver application or Application Server ---------------------------------- IBM WEBSPHERE 6.1 DEPLOYMENT NOTE ---------------------------------- When users fail to log on to BI Publisher with "HTTP 500 Internal Server Error" on WebSphere 6.1, you must change Class Loader configuration to avoid the error. (bug7506253 - XMLPSERVER WON'T START AFTER DEPLOYMENT TO WEBSPHERE 6.1) SystemErr.log: java.lang.VerifyError: class loading constraint violated (class: oracle/xml/parser/v2/XMLNode method: xdkSetQxName(Loracle/xml/util/QxName;)V) at pc: 0 .... Class Loader Configuration Steps: 1 - Login to WebSphere Admin console. Click Enterprise Applications under Applications menu 2 - Click xmlpserver application name from the list 3 - Select "Class loading and update detection" 4 - Update class loader configuration as follows in Class Loader -> General Properties * Polling interval for updated files: [0] Seconds * Class loader order: [x] Classes loaded with application class loader first * WAR class loader policy: [x] Single class loader for application 5 - Apply this change and save the new configuration. 6 - Restart xmlpserver application Please refer to WebSphere 6.1 documentation for more details. "http://publib.boulder.ibm.com/infocenter/wasinfo/v6r1/index.jsp?topic=/com.ibm.websphere.base.doc/info/aes/ae/trun_classload_entapp.html"> http://publib.boulder.ibm.com/infocenter/wasinfo/v6r1/index.jsp?topic=/com.ibm.websphere.base.doc/info/aes/ae/trun_classload_entapp.html ------------------------------------------------------- Oracle WebLogic Server 11g R1 (10.3.1) Deployment NOTE ------------------------------------------------------- If you are deploying BI Publisher to WebLogic Server 10.3.1, you must add the following setting at startup for the domain that contains the BI Publisher server in the /weblogic_home/user_projects/domains/base_domain/bin/startWebLogic.sh script : -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform This setting is required to enable BI Publisher to find the TopLink JAR files to create the Scheduler tables.

  Read the article

• Making a Simple 2-Bit Asynchronous counter in WinCupl

  - by Kevin M.

  /* ****** INPUT PINS **********/ PIN 1 = clock ; /* clock input */ /* ****** OUTPUT PINS **********/ PIN 14 = Q1 ; /* output / PIN 15 = Q2 ; / output */ Q1.ck = clock; Q1.d = !Q1; Q2.d = !Q2; This is my code and the two lines below the output pins create a 1 bit ripple counter but I'm unsure how to transfer the output of the first flip flop to be the clock input for the second flip flip.

  Read the article

• Solving the EXC_BAD_ACCESS in WhatATool Part 2

  - by Allen

  #import <Cocoa/Cocoa.h> @interface PolygonShape : NSObject { int numberOfSides, maximumNumberOfSides, minimumNumberOfSides; } @property (readwrite) int numberOfSides, maximumNumberOfSides, minimumNumberOfSides; @property (readonly) float angleInDegrees, angleInRadians; @property (readonly) NSString * name; @property (readonly) NSString * description; -(id) init; -(void) setNumberOfSides:(int)sides; -(void) setMinimumNumberOfSides:(int)min; -(void) setMaximumNumberOfSides:(int)max; -(float) angleInDegrees; -(float) angleInRadians; -(NSString *) name; -(id) initWithNumberOfSides:(int) sides minimumNumberOfSides:(int) min maximumNumberOfSides:(int) max; -(NSString *) description; -(void) dealloc; @end #import "PolygonShape.h" @implementation PolygonShape -(id) init { return [self initWithNumberOfSides:4 minimumNumberOfSides:3 maximumNumberOfSides:5]; } @synthesize numberOfSides, minimumNumberOfSides, maximumNumberOfSides, angleInRadians; -(void) setNumberOfSides:(int)sides { numberOfSides = sides; NSLog(@"The number of sides is off limit so the number of sides is %@.",sides); } -(void)setMaximumNumberOfSides:(int)max { if (maximumNumberOfSides <= 12) { maximumNumberOfSides = max; } } -(void)setMinimumNumberOfSides: (int)min { if (minimumNumberOfSides > 2) { minimumNumberOfSides = min; } } - (id)initWithNumberOfSides:(int)sides minimumNumberOfSides:(int)min maximumNumberOfSides:(int)max { if(self=[super init]) { [self setNumberOfSides:(int)sides]; [self setMaximumNumberOfSides:(int)max]; [self setMinimumNumberOfSides: (int)min]; } return self; } -(float) angleInDegrees { float anglesInDegrees = (180 * (numberOfSides - 2) / numberOfSides); return anglesInDegrees; } -(float)angleInRadiants { float anglesInRadiants = ((180 * (numberOfSides - 2) / numberOfSides) * (180 / M_PI)); return anglesInRadiants; } -(NSString *)name { NSString * output; switch (numberOfSides) { case 3: output = @"Triangle"; break; case 4: output = @"Square"; break; case 5: output = @"Pentagon"; break; case 6: output = @"Hexagon"; break; case 7: output = @"Heptagon"; break; case 8: output = @"Octagon"; break; case 9: output = @"Nonagon"; break; case 10: output = @"Decagon"; break; case 11: output = @"Hendecagon"; break; case 12: output = @"Dodecabgon"; break; default: output = @"Invalid number of sides: %i is greater than maximum of five allowed."; } return output; } -(NSString *)description { NSString * output; NSLog(@"Hello I am a %i-sided polygon (aka a %@) with angles of %f degrees (%f radians).", numberOfSides, output, [self angleInDegrees], [self angleInRadiants]); return [self description]; } -(void)dealloc { [super dealloc]; } @end #import <Foundation/Foundation.h> #import "PolygonShape.h" void PrintPathInfo() { NSLog(@"Section 1"); NSLog(@"--------------------"); NSString *path = [@"~" stringByExpandingTildeInPath]; NSLog(@"My home folder is at '%@'.", path); NSArray *pathComponent = [path pathComponents]; for (path in pathComponent) { NSLog(@"%@",path); } NSLog(@"--------------------"); NSLog(@"\n"); } void PrintProcessInfo() { NSLog(@"Section 2"); NSLog(@"--------------------"); NSString * processName = [[NSProcessInfo processInfo] processName]; int processIdentifier = [[NSProcessInfo processInfo] processIdentifier]; NSLog(@"Process Name: '%@', Process ID: '%i'", processName, processIdentifier); NSLog(@"--------------------"); NSLog(@"\n"); } void PrintBookmarkInfo() { NSLog(@"Section 3"); NSLog(@"--------------------"); NSArray * keys = [NSArray arrayWithObjects: @"Stanford University", @"Apple", @"CS193P", @"Stanford on iTunes U", @"Stanford Mall", nil]; NSArray * objects = [NSArray arrayWithObjects: [NSURL URLWithString: @"http://www.stanford.edu"], @"http://www.apple.com", @"http://cs193p.stanford.edu", @"http://itunes.stanford.edu", @"http://stanfordshop.com",nil]; NSMutableDictionary * dictionary = [NSMutableDictionary dictionaryWithObjects:objects forKeys:keys]; NSEnumerator * enumerator = [keys objectEnumerator]; for (id keys in dictionary) { NSLog(@"key: '%@', value: '%@'", keys, [dictionary objectForKey:keys]); } NSLog(@" "); NSLog(@"These are the ones that has the prefix 'Stanford'."); NSLog(@" "); id object; while (object = [enumerator nextObject]) { if ([object hasPrefix: @"Stanford"]) { NSLog(@"key: '%@', value: '%@'", object, [dictionary objectForKey:object]); } } NSLog(@"--------------------"); NSLog(@"\n"); } void PrintIntrospectionInfo() { NSLog(@"Section 4"); NSLog(@"--------------------"); SEL lowercase = @selector (lowercaseString); NSMutableArray * array = [NSMutableArray array]; [array addObject: [NSString stringWithString: @"Here is a string"]]; [array addObject: [NSDictionary dictionary]]; [array addObject: [NSURL URLWithString: @"http://www.stanford.edu"]]; [array addObject: [[NSProcessInfo processInfo]processName]]; for (id keys in array) { NSLog(@"\n"); NSLog(@"Class Name: %@", [keys className]); NSLog(@"Is Member of NSString: %@", [keys isMemberOfClass:[NSString class]]?@"Yes":@"No"); NSLog(@"Is Kind of NSString: %@", [keys isKindOfClass:[NSString class]]?@"Yes":@"No"); if ([keys respondsToSelector: lowercase]==YES) { NSLog(@"Responds to lowercaseString: %@",[keys respondsToSelector: lowercase]?@"Yes":@"No"); NSLog(@"lowercaseString is: %@", [keys performSelector: lowercase]); } else { NSLog(@"Responds to lowercaseString: %@",[keys respondsToSelector: lowercase]?@"Yes":@"No" ); } } NSLog(@"--------------------"); } void PrintPolygonInfo() { NSMutableArray * array = [NSMutableArray array]; PolygonShape * polygon1 = [[PolygonShape alloc]initWithNumberOfSides:4 minimumNumberOfSides:3 maximumNumberOfSides:7]; [array addObject:polygon1]; [array description]; PolygonShape * polygon2 = [[PolygonShape alloc]initWithNumberOfSides:6 minimumNumberOfSides:5 maximumNumberOfSides:9]; [array addObject:polygon2]; [array description]; PolygonShape * polygon3 = [[PolygonShape alloc]initWithNumberOfSides:12 minimumNumberOfSides:9 maximumNumberOfSides:12]; [array addObject:polygon3]; [array description]; [array release]; [polygon1 release]; [polygon2 release]; [polygon3 release]; } int main (int argc, const char * argv[]) { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; PrintPathInfo(); PrintProcessInfo(); PrintBookmarkInfo(); PrintIntrospectionInfo(); PrintPolygonInfo(); [pool release]; return 0; } //The result was "EXC_BAD_ACCESS", but I couldn't figure out how to resolve this problem.

  Read the article

• Code Golf: Spider webs

  - by LiraNuna

  The challenge The shortest code by character count to output a spider web with rings equal to user's input. A spider web is started by reconstructing the center ring: \_|_/ _/ \_ \___/ / | \ Then adding rings equal to the amount entered by the user. A ring is another level of a "spider circles" made from \ / | and _, and wraps the center circle. Input is always guaranteed to be a single positive integer. Test cases Input 1 Output \__|__/ /\_|_/\ _/_/ \_\_ \ \___/ / \/_|_\/ / | \ Input 4 Output \_____|_____/ /\____|____/\ / /\___|___/\ \ / / /\__|__/\ \ \ / / / /\_|_/\ \ \ \ _/_/_/_/_/ \_\_\_\_\_ \ \ \ \ \___/ / / / / \ \ \ \/_|_\/ / / / \ \ \/__|__\/ / / \ \/___|___\/ / \/____|____\/ / | \ Input: 7 Output: \________|________/ /\_______|_______/\ / /\______|______/\ \ / / /\_____|_____/\ \ \ / / / /\____|____/\ \ \ \ / / / / /\___|___/\ \ \ \ \ / / / / / /\__|__/\ \ \ \ \ \ / / / / / / /\_|_/\ \ \ \ \ \ \ _/_/_/_/_/_/_/_/ \_\_\_\_\_\_\_\_ \ \ \ \ \ \ \ \___/ / / / / / / / \ \ \ \ \ \ \/_|_\/ / / / / / / \ \ \ \ \ \/__|__\/ / / / / / \ \ \ \ \/___|___\/ / / / / \ \ \ \/____|____\/ / / / \ \ \/_____|_____\/ / / \ \/______|______\/ / \/_______|_______\/ / | \ Code count includes input/output (i.e full program).

  Read the article

• Python: Streaming Input with Subprocesses

  - by beary605

  Since input and raw_input() stop the program from running anymore, I want to use a subprocess to run this program... while True: print raw_input() and get its output. This is what I have as my reading program: import subprocess process = subprocess.Popen('python subinput.py', stdout=subprocess.PIPE, stderr=subprocess.PIPE) while True: output=process.stdout.read(12) if output=='' and process.poll()!=None: break if output!='': sys.stdout.write(output) sys.stdout.flush() When I run this, the subprocess exits almost as fast as it started. How can I fix this?

  Read the article

• Dell XPS 15 (L502x) sound problem

  - by lauramolenaar

  I have a problem with my sound on my Dell XPS 15. First, when I had Windows 7, my sound was pretty good (I have a JBL 2.1 speaker system with Waves Maxx audio), but since I installed Ubuntu 12.04 it sounded very cheap and as if I put my laptop in a tin can. I've already tried installing alsa-hda-dkms from the alsa-daily ppa (http://ppa.launchpad.net/ubuntu-audio-dev/alsa-daily) This is my audio controller: laura@laura-XPS-L502X:~$ lspci -v | grep -A7 -i audio 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04b6 Flags: bus master, fast devsel, latency 0, IRQ 51 Memory at f1c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel I hope you can help me, and you can always ask me for more information. Result of aplay -l: **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 Result of aplay -L: default Playback/recording through the PulseAudio sound server sysdefault:CARD=PCH HDA Intel PCH, ALC665 Analog Default Audio Device front:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Front speakers surround40:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=PCH,DEV=0 HDA Intel PCH, HDMI 0 HDMI Audio Output dmix:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample mixing device dmix:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample mixing device dmix:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample mixing device dsnoop:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct sample snooping device dsnoop:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct sample snooping device dsnoop:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct sample snooping device hw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Direct hardware device without any conversions hw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Direct hardware device without any conversions hw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Direct hardware device without any conversions plughw:CARD=PCH,DEV=0 HDA Intel PCH, ALC665 Analog Hardware device with all software conversions plughw:CARD=PCH,DEV=1 HDA Intel PCH, ALC665 Digital Hardware device with all software conversions plughw:CARD=PCH,DEV=3 HDA Intel PCH, HDMI 0 Hardware device with all software conversions

  Read the article

• Second Monitor stays black/in power save mode

  - by Rob

  I'm using two Monitors, a Belinea o.display 1 (Recognized as a Rogen Tech Distribution Inc 20" by Ubuntu, but working fine) on the DVI-Output (connected via DVI-to-VGA-adapter) as my primary Monitor and a Dell 19" (Recognized correctly) on the HDMI-output (via HDMI-to-DVI adapter) as secondary monitor. The graphics controller is a GeForce 9500 GS. I'm running a fully updated Ubuntu 13.04 with nouveau 1:1.0.7-0ubuntu1. The problem is that the second monitor (Dell) never seems to come out of standby during boot: the screen stays black and the status led on the monitor stays orange (it's green when it's on). It is correctly recognized an the size of the desktop is set accordingly, it just stays black. Changing any setting via xrandr/arandr/etc. does nothing. The on-screen-menu of the monitor reports it to be in power save mode. When using the proprietary NVIDIA-Drivers, the second monitor works just find. But these drivers cause a lot of other problems on my system, so i would really like to avoid them. On Ubuntu 12.10 i had found a workaround: When moving the relative position of the second monitor slightly down and the up again, it would turn on and function normally: xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x88 --rotate normal sleep 2 xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x0 --rotate normal This workaround stop working after the update to 13.04, and now i'm looking for a new solution. Has anyone experienced something similarity? xrandr output: Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192 DVI-I-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 270mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.1 72.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 HDMI-1 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G96 [GeForce 9500 GS] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nouveau latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:df00(Größe=128) memory:fb000000-fb07ffff Thanks for your help!

  Read the article

• pre-commit hook in svn: could not be translated from the native locale to UTF-8

  - by Alexandre Moraes

  Hi everybody, I have a problem with my pre-commit hook. This hook test if a file is locked when the user commits. When a bad condition happens, it should output that the another user is locking this file or if nobody is locking, it should show "you are not locking this file message (file´s name)". The error happens when the file´s name has some latin character like "ç" and tortoise show me this in the output. Commit failed (details follow): Commit blocked by pre-commit hook (exit code 1) with output: [Erro output could not be translated from the native locale to UTF-8.] Do you know how can I solve this? Thanks, Alexandre My shell script is here: #!/bin/sh REPOS="$1" TXN="$2" export LANG="en_US.UTF-8" /app/svn/hooks/ensure-has-need-lock.pl "$REPOS" "$TXN" if [ $? -ne 0 ]; then exit 1; fi exit 0 And my perl is here: !/usr/bin/env perl #Turn on warnings the best way depending on the Perl version. BEGIN { if ( $] >= 5.006_000) { require warnings; import warnings; } else { $^W = 1; } } use strict; use Carp; &usage unless @ARGV == 2; my $repos = shift; my $txn = shift; my $svnlook = "/usr/local/bin/svnlook"; my $user; my $ok = 1; foreach my $program ($svnlook) { if (-e $program) { unless (-x $program) { warn "$0: required program $program' is not executable, ", "edit $0.\n"; $ok = 0; } } else { warn "$0: required program $program' does not exist, edit $0.\n"; $ok = 0; } } exit 1 unless $ok; unless (-e $repos){ &usage("$0: repository directory $repos' does not exist."); } unless (-d $repos){ &usage("$0: repository directory $repos' is not a directory."); } foreach my $user_tmp (&read_from_process($svnlook, 'author', $repos, '-t', $txn)) { $user = $user_tmp; } my @errors; foreach my $transaction (&read_from_process($svnlook, 'changed', $repos, '-t', $txn)){ if ($transaction =~ /^U. (.*[^\/])$/){ my $file = $1; my $err = 0; foreach my $locks (&read_from_process($svnlook, 'lock', $repos, $file)){ $err = 1; if($locks=~ /Owner: (.*)/){ if($1 != $user){ push @errors, "$file : You are not locking this file!"; } } } if($err==0){ push @errors, "$file : You are not locking this file!"; } } elsif($transaction =~ /^D. (.*[^\/])$/){ my $file = $1; my $tchan = &read_from_process($svnlook, 'lock', $repos, $file); foreach my $locks (&read_from_process($svnlook, 'lock', $repos, $file)){ push @errors, "$1 : cannot delete locked Files"; } } elsif($transaction =~ /^A. (.*[^\/])$/){ my $needs_lock; my $path = $1; foreach my $prop (&read_from_process($svnlook, 'proplist', $repos, '-t', $txn, '--verbose', $path)){ if ($prop =~ /^\s*svn:needs-lock : (\S+)/){ $needs_lock = $1; } } if (not $needs_lock){ push @errors, "$path : svn:needs-lock is not set. Pleas ask TCC for support."; } } } if (@errors) { warn "$0:\n\n", join("\n", @errors), "\n\n"; exit 1; } else { exit 0; } sub usage { warn "@_\n" if @_; die "usage: $0 REPOS TXN-NAME\n"; } sub safe_read_from_pipe { unless (@_) { croak "$0: safe_read_from_pipe passed no arguments.\n"; } print "Running @_\n"; my $pid = open(SAFE_READ, '-|'); unless (defined $pid) { die "$0: cannot fork: $!\n"; } unless ($pid) { open(STDERR, ">&STDOUT") or die "$0: cannot dup STDOUT: $!\n"; exec(@_) or die "$0: cannot exec @_': $!\n"; } my @output; while (<SAFE_READ>) { chomp; push(@output, $_); } close(SAFE_READ); my $result = $?; my $exit = $result >> 8; my $signal = $result & 127; my $cd = $result & 128 ? "with core dump" : ""; if ($signal or $cd) { warn "$0: pipe from @_' failed $cd: exit=$exit signal=$signal\n"; } if (wantarray) { return ($result, @output); } else { return $result; } } sub read_from_process { unless (@_) { croak "$0: read_from_process passed no arguments.\n"; } my ($status, @output) = &safe_read_from_pipe(@_); if ($status) { if (@output) { die "$0: @_' failed with this output:\n", join("\n", @output), "\n"; } else { die "$0: @_' failed with no output.\n"; } } else { return @output; } }

  Read the article

• IntelliTrace As a Learning Tool for MVC2 in a VS2010 Project

  - by Sam Abraham

  IntelliTrace is a new feature in Visual Studio 2010 Ultimate Edition. I see this valuable tool as a “Program Execution Recorder” that captures information about events and calls taking place as soon as we hit the VS2010 play (Start Debugging) button or the F5 key. Many online resources already discuss IntelliTrace and the benefit it brings to both developers and testers alike so I see no value of just repeating this information.  In this brief blog entry, I would like to share with you how I will be using IntelliTrace in my upcoming talk at the Ft Lauderdale ArcSig .Net User Group Meeting on April 20th 2010 (check http://www.fladotnet.com for more information), as a learning tool to demonstrate the internals of the lifecycle of an MVC2 application.  I will also be providing some helpful links that cover IntelliTrace in more detail at the end of my article for reference. IntelliTrace is setup by default to only capture execution events. Microsoft did such a great job on optimizing its recording process that I haven’t even felt the slightest performance hit with IntelliTrace running as I was debugging my solutions and projects.  For my purposes here however, I needed to capture more information beyond execution events, so I turned on the option for capturing calls in addition to events as shown in Figures 1 and 2. Changing capture options will require us to stop our debugging session and start over for the new settings to take place. Figure 1 – Access IntelliTrace options via the Tools->Options menu items Figure 2 – Change IntelliTrace Options to capture call information as well as events Notice the warning with regards to potentially degrading performance when selecting to capture call information in addition to the default events-only setting. I have found this warning to be sure true. My subsequent tests showed slowness in page load times compared to rendering those same exact pages with the “event-only” option selected. Execution recording is auto-started along with the new debugging session of our project. At this point, we can simply interact with the application and continue executing normally until we decide to “playback” the code we have executed so far.  For code replay, first step is to “break” the current execution as show in Figure 3.   Figure 3 – Break to replay recording A few tries later, I found a good process to quickly find and demonstrate the MVC2 page lifecycle. First-off, we start with the event view as shown in Figure 4 until we find an interesting event that needs further studying.  Figure 4 – Going through IntelliTrace’s events and picking as specific entry of interest We now can, for instance, study how the highlighted HTTP GET request is being handled, by clicking on the “Calls View” for that particular event. Notice that IntelliTrace shows us all calls that took place in servicing that GET request. Double clicking on any call takes us to a more granular view of the call stack within that clicked call, up until getting to a specific line of code where we can do a line-by-line replay of the execution from that point onwards using F10 or F11 just like our typical good old VS2008 debugging helped us accomplish. Figure 5 – switching to call view on an event of interest Figure 6 – Double clicking on call shows a more granular view of the call stack. In conclusion, the introduction of IntelliTrace as a new addition to the VS developers’ tool arsenal enhances development and debugging experience and effectively tackles the “no-repro” problem. It will also hopefully enhance my audience’s experience listening to me speaking about  an MVC2 page lifecycle which I can now easily visually demonstrate, thereby improving the probability of keeping everybody awake a little longer. IntelliTrace References: http://msdn.microsoft.com/en-us/magazine/ee336126.aspx http://msdn.microsoft.com/en-us/library/dd264944(VS.100).aspx

  Read the article

• WebCenter Customer Spotlight: Texas Industries, Inc.

  - by me

  Author: Peter Reiser - Social Business Evangelist, Oracle WebCenter  Solution SummaryTexas Industries, Inc. (TXI) is a leading supplier of cement, aggregate, and consumer product building materials for residential, commercial, and public works projects. TXI is based in Dallas and employs around 2,000 employees. The customer had the challenge of decentralized and manual processes for entering 180,000 vendor invoices annually.  Invoice entry was a time- and resource-intensive process that entailed significant personnel requirements. TXI implemented a centralized solution leveraging Oracle WebCenter Imaging, a smart routing solution that enables users to capture invoices electronically with Oracle WebCenter Capture and Oracle WebCenter Forms Recognition to send  the invoices through to Oracle Financials for approvals and processing.  TXI significantly lowered resource needs for payable processing,  increase productivity by 80% and reduce invoice processing cycle times by 84%—from 20 to 30 days to just 3 to 5 days, on average. Company OverviewTexas Industries, Inc. (TXI) is a leading supplier of cement, aggregate, and consumer product building materials for residential, commercial, and public works projects. With operating subsidiaries in six states, TXI is the largest producer of cement in Texas and a major producer in California. TXI is a major supplier of stone, sand, gravel, and expanded shale and clay products, and one of the largest producers of bagged cement and concrete  products in the Southwest. Business ChallengesTXI had the challenge of decentralized and manual processes for entering 180,000 vendor invoices annually.  Invoice entry was a time- and resource-intensive process that entailed significant personnel requirements. Their business objectives were: Increase the efficiency of core business processes, such as invoice processing, to support the organization’s desire to maintain its role as the Southwest’s leader in delivering high-quality, low-cost products to the construction industry Meet the audit and regulatory requirements for achieving Sarbanes-Oxley (SOX) compliance Streamline entry of 180,000 invoices annually to accelerate processing, reduce errors, cut invoice storage and routing costs, and increase visibility into payables liabilities Solution DeployedTXI replaced a resource-intensive, paper-based, decentralized process for invoice entry with a centralized solution leveraging Oracle WebCenter Imaging 11g. They worked with the Oracle Partner Keste LLC to develop a smart routing solution that enables users to capture invoices electronically with Oracle WebCenter Capture and then uses Oracle WebCenter Forms Recognition and the Oracle WebCenter Imaging workflow to send the invoices through to Oracle Financials for approvals and processing. Business Results Significantly lowered resource needs for payable processing through centralization and improved efficiency  Enabled the company to process invoices faster and pay bills earlier, allowing it to take advantage of additional vendor discounts Tracked to increase productivity by 80% and reduce invoice processing cycle times by 84%—from 20 to 30 days to just 3 to 5 days, on average Achieved a 25% reduction in paper invoice storage costs now that invoices are captured digitally, and enabled a 50% reduction in shipping costs, as the company no longer has to send paper invoices between headquarters and production facilities for approvals “Entering and manually processing more than 180,000 vendor invoices annually was time and labor intensive. With Oracle Imaging and Process Management, we have automated and centralized invoice entry and processing at our corporate office, improving productivity by 80% and reducing invoice processing cycle times by 84%—a very important efficiency gain.” Terry Marshall, Vice President of Information Services, Texas Industries, Inc. Additional Information TXI Customer Snapshot Oracle WebCenter Content Oracle WebCenter Capture Oracle WebCenter Forms Recognition

  Read the article

• Neural Network Always Produces Same/Similar Outputs for Any Input

  - by l33tnerd

  I have a problem where I am trying to create a neural network for Tic-Tac-Toe. However, for some reason, training the neural network causes it to produce nearly the same output for any given input. I did take a look at Artificial neural networks benchmark, but my network implementation is built for neurons with the same activation function for each neuron, i.e. no constant neurons. To make sure the problem wasn't just due to my choice of training set (1218 board states and moves generated by a genetic algorithm), I tried to train the network to reproduce XOR. The logistic activation function was used. Instead of using the derivative, I multiplied the error by output*(1-output) as some sources suggested that this was equivalent to using the derivative. I can put the Haskell source on HPaste, but it's a little embarrassing to look at. The network has 3 layers: the first layer has 2 inputs and 4 outputs, the second has 4 inputs and 1 output, and the third has 1 output. Increasing to 4 neurons in the second layer didn't help, and neither did increasing to 8 outputs in the first layer. I then calculated errors, network output, bias updates, and the weight updates by hand based on http://hebb.mit.edu/courses/9.641/2002/lectures/lecture04.pdf to make sure there wasn't an error in those parts of the code (there wasn't, but I will probably do it again just to make sure). Because I am using batch training, I did not multiply by x in equation (4) there. I am adding the weight change, though http://www.faqs.org/faqs/ai-faq/neural-nets/part2/section-2.html suggests to subtract it instead. The problem persisted, even in this simplified network. For example, these are the results after 500 epochs of batch training and of incremental training. Input |Target|Output (Batch) |Output(Incremental) [1.0,1.0]|[0.0] |[0.5003781562785173]|[0.5009731800870864] [1.0,0.0]|[1.0] |[0.5003740346965251]|[0.5006347214672715] [0.0,1.0]|[1.0] |[0.5003734471544522]|[0.500589332376345] [0.0,0.0]|[0.0] |[0.5003674110937019]|[0.500095157458231] Subtracting instead of adding produces the same problem, except everything is 0.99 something instead of 0.50 something. 5000 epochs produces the same result, except the batch-trained network returns exactly 0.5 for each case. (Heck, even 10,000 epochs didn't work for batch training.) Is there anything in general that could produce this behavior? Also, I looked at the intermediate errors for incremental training, and the although the inputs of the hidden/input layers varied, the error for the output neuron was always +/-0.12. For batch training, the errors were increasing, but extremely slowly and the errors were all extremely small (x10^-7). Different initial random weights and biases made no difference, either. Note that this is a school project, so hints/guides would be more helpful. Although reinventing the wheel and making my own network (in a language I don't know well!) was a horrible idea, I felt it would be more appropriate for a school project (so I know what's going on...in theory, at least. There doesn't seem to be a computer science teacher at my school). EDIT: Two layers, an input layer of 2 inputs to 8 outputs, and an output layer of 8 inputs to 1 output, produces much the same results: 0.5+/-0.2 (or so) for each training case. I'm also playing around with pyBrain, seeing if any network structure there will work. Edit 2: I am using a learning rate of 0.1. Sorry for forgetting about that. Edit 3: Pybrain's "trainUntilConvergence" doesn't get me a fully trained network, either, but 20000 epochs does, with 16 neurons in the hidden layer. 10000 epochs and 4 neurons, not so much, but close. So, in Haskell, with the input layer having 2 inputs & 2 outputs, hidden layer with 2 inputs and 8 outputs, and output layer with 8 inputs and 1 output...I get the same problem with 10000 epochs. And with 20000 epochs. Edit 4: I ran the network by hand again based on the MIT PDF above, and the values match, so the code should be correct unless I am misunderstanding those equations. Some of my source code is at http://hpaste.org/42453/neural_network__not_working; I'm working on cleaning my code somewhat and putting it in a Github (rather than a private Bitbucket) repository. All of the relevant source code is now at https://github.com/l33tnerd/hsann.

  Read the article

• SSIS Debugging Tip: Using Data Viewers

  - by Jim Giercyk

  When you have an SSIS package error, it is often very helpful to see the data records that are causing the problem.  After all, if your input has 50,000 records and 1 of them has corrupt data, it can be a chore.  Your execution results will tell you which column contains the bad data, but not which record…..enter the Data Viewer. In this scenario I have created a truncation error.  The input length of [lastname] is 50, but the output table has a length of 15.  When it runs, at least one of the records causes the package to fail.     Now what?  We can tell from our execution results that there is a problem with [lastname], but we have no idea WHICH record?     Let’s identify the row that is actually causing the problem.  First, we grab the oft’ forgotten Row Count shape from our toolbar and connect it to the error output from our input query.  Remember that in order to intercept errors with the error output, you must redirect them.     The Row Count shape requires 1 integer variable.  For our purposes, we will not reference the variable, but it is still required in order for the package to run.  Typically we would use the variable to hold the number of rows in the table and refer back to it later in our process.  We are simply using the Row Count as a “Dead End” for errors.  I called my variable RowCounter.  To create a variable, with no shapes selected, right-click on the background and choose Variable.     Once we have setup the Row Count shape, we can right-click on the red line (error output) from the query, and select Data Viewers.  In the popup, we click the add button and we will see this:     There are other fancier options we can play with, but for now we just want to view the output in a grid.  WE select Grid, then click OK on all of the popup windows to shut them down.  We should now see a grid with a pair of glasses on the error output line.     So, we are ready to catch the error output in a grid and see that is causing the problem!  This time when we run the package, it does not fail because we directed the error to the Row Count.  We also get a popup window showing the error record in a grid.  If there were multiple errors we would see them all.     Indeed, the [lastname] column is longer than 15 characters.  Notice the last column in the grid, [Error Code – Description].  We knew this was a truncation error before we added the grid, but if you have worked with SSIS for any length of time, you know that some errors are much more obscure.  The description column can be very useful under those circumstances! Data viewers can be used any time we want to see the data that is actually in the pipeline;  they stop the package temporarily until we shut them.  Also remember that the Row Count shape can be used as a “Dead End”.  It is useful during development when we want to see the output from a dataflow, but don’t want to update a table or file with the data.  Data viewers are an invaluable tool for both development and debugging.  Just remember to REMOVE THEM before putting your package into production

  Read the article

• Oracle GoldenGate 11g Release 2 Launch Webcast Replay Available

  - by Irem Radzik

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} For those of you who missed Oracle GoldenGate 11g Release 2 launch webcasts last week, the replay is now available from the following url. Harnessing the Power of the New Release of Oracle GoldenGate 11g I would highly recommend watching the webcast to meet many new features of the new release and hear the product management team respond to the questions from the audience in a nice long Q&A section. In my blog last week I listed the media coverage for this new release. There is a new article published by ITJungle talking about Oracle GoldenGate’s heterogeneity and support for DB2 for iSeries: Oracle Completes DB2/400 Support in Data Replication Tool As mentioned in last week’s blog, we received over 150 questions from the audience and in this blog I'd like to continue to post some of the frequently asked,  questions and their answers: Question: What are the fundamental differences between classic data capture and integrated data capture? Do both use the redo logs in the source database? Answer: Yes, they both use redo logs. Classic capture parses the redo log data directly, whereas the Integrated Capture lets the Oracle database parse the redo log record using an internal API. Question: Does GoldenGate version need to match Oracle Database version? Answer: No, they are not directly linked. Oracle GoldenGate 11g Release 2 supports Oracle Database version 10gR2 as well. For Oracle Database version 10gR1 and Oracle Database version 9i you will need GoldenGate11g Release 1 or lower. And for Oracle Database 8i you need Oracle GoldenGate 10 or earlier versions. Question: If I already use Data Guard, do I need GoldenGate? Answer: Data Guard is designed as the best disaster recovery solution for Oracle Database. If you would like to implement a bidirectional Active-Active replication solution or need to move data between heterogeneous systems, you will need GoldenGate. Question: On Compression and GoldenGate, if the source uses compression, is it required that the target also use compression? Answer: No, the source and target do not need to have the same compression settings. Question: Does GG support Advance Security Option on the Source database? Answer: Yes it does. Question: Can I use GoldenGate to upgrade the Oracle Database to 11g and do OS migration at the same time? Answer: Yes, this is a very common project where GoldenGate can eliminate downtime, give flexibility to test the target as needed, and minimize risks with fail-back option to the old environment. For more information on database upgrades please check out the following white papers: Best Practices for Migrating/Upgrading Oracle Database Using Oracle GoldenGate 11g Zero-Downtime Database Upgrades Using Oracle GoldenGate Question: Does GoldenGate create any trigger in the source database table level or row level to for real-time data integration? Answer: No, GoldenGate does not create triggers. Question: Can transformation be done after insert to destination table or need to be done before? Answer: It can happen in the Capture (Extract) process, in the  Delivery (Replicat) process, or in the target database. For more resources on Oracle GoldenGate 11gR2 please check out our Oracle GoldenGate 11gR2 resource kit as well.

  Read the article

• T-SQL (SCD) Slowly Changing Dimension Type 2 using a merge statement

  - by AtulThakor

  Working on stored procedure recently which loads records into a data warehouse I found that the existing record was being expired using an update statement followed by an insert to add the new active record. Playing around with the merge statement you can actually expire the current record and insert a new record within one clean statement. This is how the statement works, we do the normal merge statement to insert a record when there is no match, if we match the record we update the existing record by expiring it and deactivating. At the end of the merge statement we use the output statement to output the staging values for the update,  we wrap the whole merge statement within an insert statement and add new rows for the records which we inserted. I’ve added the full script at the bottom so you can paste it and play around.   1: INSERT INTO ExampleFactUpdate 2: (PolicyID, 3: Status) 4: SELECT -- these columns are returned from the output statement 5: PolicyID, 6: Status 7: FROM 8: ( 9: -- merge statement on unique id in this case Policy_ID 10: MERGE dbo.ExampleFactUpdate dp 11: USING dbo.ExampleStag s 12: ON dp.PolicyID = s.PolicyID 13: WHEN NOT MATCHED THEN -- when we cant match the record we insert a new record record and this is all that happens 14: INSERT (PolicyID,Status) 15: VALUES (s.PolicyID, s.Status) 16: WHEN MATCHED --if it already exists 17: AND ExpiryDate IS NULL -- and the Expiry Date is null 18: THEN 19: UPDATE 20: SET 21: dp.ExpiryDate = getdate(), --we set the expiry on the existing record 22: dp.Active = 0 -- and deactivate the existing record 23: OUTPUT $Action MergeAction, s.PolicyID, s.Status -- the output statement returns a merge action which can 24: ) MergeOutput -- be insert/update/delete, on our example where a record has been updated (or expired in our case 25: WHERE -- we'll filter using a where clause 26: MergeAction = 'Update'; -- here   Complete source for example 1: if OBJECT_ID('ExampleFactUpdate') > 0 2: drop table ExampleFactUpdate 3:  4: Create Table ExampleFactUpdate( 5: ID int identity(1,1), 3: go 6: PolicyID varchar(100), 7: Status varchar(100), 8: EffectiveDate datetime default getdate(), 9: ExpiryDate datetime, 10: Active bit default 1 11: ) 12:  13:  14: insert into ExampleFactUpdate( 15: PolicyID, 16: Status) 17: select 18: 1, 19: 'Live' 20:  21: /*Create Staging Table*/ 22: if OBJECT_ID('ExampleStag') > 0 23: drop table ExampleStag 24: go 25:  26: /*Create example fact table */ 27: Create Table ExampleStag( 28: PolicyID varchar(100), 29: Status varchar(100)) 30:  31: --add some data 32: insert into ExampleStag( 33: PolicyID, 34: Status) 35: select 36: 1, 37: 'Lapsed' 38: union all 39: select 40: 2, 41: 'Quote' 42:  43: select * 44: from ExampleFactUpdate 45:  46: select * 47: from ExampleStag 48:  49:  50: INSERT INTO ExampleFactUpdate 51: (PolicyID, 52: Status) 53: SELECT -- these columns are returned from the output statement 54: PolicyID, 55: Status 56: FROM 57: ( 58: -- merge statement on unique id in this case Policy_ID 59: MERGE dbo.ExampleFactUpdate dp 60: USING dbo.ExampleStag s 61: ON dp.PolicyID = s.PolicyID 62: WHEN NOT MATCHED THEN -- when we cant match the record we insert a new record record and this is all that happens 63: INSERT (PolicyID,Status) 64: VALUES (s.PolicyID, s.Status) 65: WHEN MATCHED --if it already exists 66: AND ExpiryDate IS NULL -- and the Expiry Date is null 67: THEN 68: UPDATE 69: SET 70: dp.ExpiryDate = getdate(), --we set the expiry on the existing record 71: dp.Active = 0 -- and deactivate the existing record 72: OUTPUT $Action MergeAction, s.PolicyID, s.Status -- the output statement returns a merge action which can 73: ) MergeOutput -- be insert/update/delete, on our example where a record has been updated (or expired in our case 74: WHERE -- we'll filter using a where clause 75: MergeAction = 'Update'; -- here 76:  77:  78: select * 79: from ExampleFactUpdate 80: 

  Read the article

• Advanced donut caching: using dynamically loaded controls

  - by DigiMortal

  Yesterday I solved one caching problem with local community portal. I enabled output cache on SharePoint Server 2007 to make site faster. Although caching works fine I needed to do some additional work because there are some controls that show different content to different users. In this example I will show you how to use “donut caching” with user controls – powerful way to drive some content around cache. About donut caching Donut caching means that although you are caching your content you have some holes in it so you can still affect the output that goes to user. By example you can cache front page on your site and still show welcome message that contains correct user name. To get better idea about donut caching I suggest you to read ScottGu posting Tip/Trick: Implement "Donut Caching" with the ASP.NET 2.0 Output Cache Substitution Feature. Basically donut caching uses ASP.NET substitution control. In output this control is replaced by string you return from static method bound to substitution control. Again, take a look at ScottGu blog posting I referred above. Problem If you look at Scott’s example it is pretty plain and easy by its output. All it does is it writes out current user name as string. Here are examples of my login area for anonymous and authenticated users:    It is clear that outputting mark-up for these views as string is pretty lame to implement in code at string level. Every little change in design will end up with new version of controls library because some parts of design “live” there. Solution: using user controls I worked out easy solution to my problem. I used cache substitution and user controls together. I have three user controls: LogInControl – this is the proxy control that checks which “real” control to load. AnonymousLogInControl – template and logic for anonymous users login area. AuthenticatedLogInControl – template and logic for authenticated users login area. This is the control we render for each user separately because it contains user name and user profile fill percent. Anonymous control is not very interesting because it is only about keeping mark-up in separate file. Interesting parts are LogInControl and AuthenticatedLogInControl. Creating proxy control The first thing was to create control that has substitution area where “real” control is loaded. This proxy control should also be available to decide which control to load. The definition of control is very primitive. <%@ Control EnableViewState="false" Inherits="MyPortal.Profiles.LogInControl" %> <asp:Substitution runat="server" MethodName="ShowLogInBox" /> But code is a little bit tricky. Based on current user instance we decide which login control to load. Then we create page instance and load our control through it. When control is loaded we will call DataBind() method. In this method we evaluate all fields in loaded control (it was best choice as Load and other events will not be fired). Take a look at the code. public static string ShowLogInBox(HttpContext context) {     var user = SPContext.Current.Web.CurrentUser;     string controlName;       if (user != null)         controlName = "AuthenticatedLogInControl.ascx";     else         controlName = "AnonymousLogInControl.ascx";       var path = "~/_controltemplates/" + controlName;     var output = new StringBuilder(10000);       using(var page = new Page())     using(var ctl = page.LoadControl(path))     using(var writer = new StringWriter(output))     using(var htmlWriter = new HtmlTextWriter(writer))     {         ctl.DataBind();         ctl.RenderControl(htmlWriter);     }     return output.ToString(); } When control is bound to data we ask to render it its contents to StringBuilder. Now we have the output of control as string and we can return it from our method. Of course, notice how correct I am with resources disposing. :) The method that returns contents for substitution control is static method that has no connection with control instance because hen page is read from cache there are no instances of controls available. Conclusion As you saw it was not very hard to use donut caching with user controls. Instead of writing mark-up of controls to static method that is bound to substitution control we can still use our user controls.

  Read the article

• Detecting Duplicates Using Oracle Business Rules

  - by joeywong-Oracle

  Recently I was involved with a Business Process Management Proof of Concept (BPM PoC) where we wanted to show how customers could use Oracle Business Rules (OBR) to easily define some rules to detect certain conditions, such as duplicate account numbers, duplicate names, high transaction amounts, etc, in a set of transactions. Traditionally you would have to loop through the transactions and compare each transaction with each other to find matching conditions. This is not particularly nice as it relies on more traditional approaches (coding) and is not the most efficient way. OBR is a great place to house these types’ of rules as it allows users/developers to externalise the rules, in a simpler manner, externalising the rules from the message flows and allows users to change them when required. So I went ahead looking for some examples. After quite a bit of time spent Googling, I did not find much out in the blogosphere. In fact the best example was actually from...... wait for it...... Oracle Documentation! (http://docs.oracle.com/cd/E28271_01/user.1111/e10228/rules_start.htm#ASRUG228) However, if you followed the link there was not much explanation provided with the example. So the aim of this article is to provide a little more explanation to the example so that it can be better understood. Note: I won’t be covering the BPM parts in great detail. Use case: Payment instruction file is required to be processed. Before instruction file can be processed it needs to be approved by a business user. Before the approval process, it would be useful to run the payment instruction file through OBR to look for transactions of interest. The output of the OBR can then be used to flag the transactions for the approvers to investigate. Example BPM Process So let’s start defining the Business Rules Dictionary. For the input into our rules, we will be passing in an array of payments which contain some basic information for our demo purposes. Input to Business Rules And for our output we want to have an array of rule output messages. Note that the element I am using for the output is only for one rule message element and not an array. We will configure the Business Rules component later to return an array instead. Output from Business Rules Business Rule – Create Dictionary Fill in all the details and click OK. Open the Business Rules component and select Decision Functions from the side. Modify the Decision Function Configuration Select the decision function and click on the edit button (the pencil), don’t worry that JDeveloper indicates that there is an error with the decision function. Then click the Ouputs tab and make sure the checkbox under the List column is checked, this is to tell the Business Rules component that it should return an array of rule message elements. Updating the Decision Service Next we will define the actual rules. Click on Ruleset1 on the side and then the Create Rule in the IF/THEN Rule section. Creating new rule in ruleset Ok, this is where some detailed explanation is required. Remember that the input to this Business Rules dictionary is a list of payments, each of those payments were of the complex type PaymentType. Each of those payments in the Oracle Business Rules engine is treated as a fact in its working memory. Implemented rule So in the IF/THEN rule, the first task is to grab two PaymentType facts from the working memory and assign them to temporary variable names (payment1 and payment2 in our example). Matching facts Once we have them in the temporary variables, we can then start comparing them to each other. For our demonstration we want to find payments where the account numbers were the same but the account name was different. Suspicious payment instruction And to stop the rule from comparing the same facts to each other, over and over again, we have to include the last test. Stop rule from comparing endlessly And that’s it! No for loops, no need to keep track of what you have or have not compared, OBR handles all that for you because everything is done in its working memory. And once all the tests have been satisfied we need to assert a new fact for the output. Assert the output fact Save your Business Rules. Next step is to complete the data association in the BPM process. Pay extra care to use Copy List instead of the default Copy when doing data association at an array level. Input and output data association Deploy and test. Test data Rule matched Parting words: Ideally you would then use the output of the Business Rules component to then display/flag the transactions which triggered the rule so that the approver can investigate. Link: SOA Project Archive [Download]

  Read the article

• Selenium screenshots using rspec

  - by Thomas Albright

  I am trying to capture screenshots on test failure using selenium-client and rspec. I run this command: $ spec my_spec.rb \ --require 'rubygems,selenium/rspec/reporting/selenium_test_report_formatter' \ --format=Selenium::RSpec::SeleniumTestReportFormatter:./report.html It creates the report correctly when everything passes, since no screenshots are required. However, when the test fails, I get this message, and the report has blank screenshots: WARNING: Could not capture HTML snapshot: execution expired WARNING: Could not capture page screenshot: execution expired WARNING: Could not capture system screenshot: execution expired Problem while capturing system stateexecution expired What is causing this 'execution expired' error? Am I missing something important in my spec? Here is the code for my_spec.rb: require 'rubygems' gem "rspec", "=1.2.8" gem "selenium-client" require "selenium/client" require "selenium/rspec/spec_helper" describe "Databases" do attr_reader :selenium_driver alias :page :selenium_driver before(:all) do @selenium_driver = Selenium::Client::Driver.new \ :host => "192.168.0.10", :port => 4444, :browser => "*firefox", :url => "http://192.168.0.11/", :timeout_in_seconds => 10 end before(:each) do @selenium_driver.start_new_browser_session end # The system capture need to happen BEFORE closing the Selenium session append_after(:each) do @selenium_driver.close_current_browser_session end it "backed up" do page.open "/SQLDBDetails.aspx page.click "btnBackup", :wait_for => :page page.text?("Pending Backup").should be_true end end

  Read the article

• Why do I get garbage output when printing an int[]?

  - by Kat

  My program is suppose to count the occurrence of each character in a file ignoring upper and lower case. The method I wrote is: public int[] getCharTimes(File textFile) throws FileNotFoundException { Scanner inFile = new Scanner(textFile); int[] lower = new int[26]; char current; int other = 0; while(inFile.hasNext()){ String line = inFile.nextLine(); String line2 = line.toLowerCase(); for (int ch = 0; ch < line2.length(); ch++) { current = line2.charAt(ch); if(current >= 'a' && current <= 'z') lower[current-'a']++; else other++; } } return lower; } And is printed out using: for(int letter = 0; letter < 26; letter++) { System.out.print((char) (letter + 'a')); System.out.println(": " + ts.getCharTimes(file)); } Where ts is a TextStatistic object created earlier in my main method. However when I run my program, instead of printing out the number of how often the character occurs it prints: a: [I@f84386 b: [I@1194a4e c: [I@15d56d5 d: [I@efd552 e: [I@19dfbff f: [I@10b4b2f And I don't know what I'm doing wrong.

  Read the article

• How do I take input/output from a form and store it in a JS variable?

  - by marcamillion

  I am creating the UI of a web app, and haven't done any back-end work yet. For testing purposes, I want my forms to be able to work, so I want to take the input they have received and store it in javascript variables so I can access them, using jQuery. Everything I have looked at, tells me how to pass js variables into the form, not the other way around. Any ideas? Thanks.

  Read the article

• How can I flush the output of disp in Octave?

  - by Nathan Fellman

  I have a program in Octave that has a loop - running a function with various parameters, not something that I can turn into matrices. At the beginning of each iteration I print the current parameters using disp. The first times I ran it I had a brazillion warnings, and then I also got these prints. Now that I cleaned them up, I no longer see them. My guess is that they're stuck in a buffer, and I'll see them when the program ends or the buffer fills. Is there any way to force a flush of the print buffer so that I can see my prints?

  Read the article

• How do I specify an output file name for a compiled ASP.NET application?

  - by CSharp Noob

  I have read under: Compiling Web Application Projects (http://msdn.microsoft.com/en-us/library/aa983464.aspx) ... this compilation model creates a single assembly, you can specify attributes, such as assembly name and version. You can supply a PATH (directory name only) in the Visual Studio "Build Options". But where can a file name be specified?

  Read the article

• How to create a Turing machine that takes a single digit decimal number from 0 - 9 and output the cu

  - by Julian

  I'm working on a project for a Turning machine but having problems conceptualizing the steps. f(x) = x^3, where x is a single digit between 0 - 9 inclusive. Based on my understanding I am to convert the number to binary but how do I find the cube of a number in binary. Also, how do I write the cube on the tape. So far I'm thinking I should create a state diagram that accepts the binary versions of 0-9 but what next?

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >