Search Results

Search found 5464 results on 219 pages for 'effect'.

Page 105/219 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

  • Oracle Social Network -The Social Glue for Enterprise Applications

    - by me
    Tom Petrocelli of Enterprise Strategy Group published a report recently, “Oracle Social Network: The Social Glue for Enterprise Applications”, on Oracle Social Network (OSN) and how traditional social products create social silos whereas OSN is the “social glue” for enterprise applications.  This report supports the point of Oracle’s Social Business Strategy to seamless integrate social capabilities into the main business processes. Quote from report: “Oracle has adopted the correct approach to creating a social layer and socially enabled applications. Oracle Social Network is not simply another enterprise social network product; it is a complete social layer for the enterprise application stack. This approach will serve Oracle users well in the future.” OSN allow to capture the related Conversations of a business process right where it’s happens – within the respective Business application.  Fusion CRM is an excellent example for this approach. Quote from report: “Oracle’s new software, Oracle Social Network, is an example of a solution to the silo problem. While Oracle fields a typical enterprise social network application with microblogging, file sharing, shared documents or wikis, and activity streams, the front-end application is only a small part of what Oracle Social Network does. Instead, Oracle Social Network is a platform that provides social features as a service to other enterprise applications. In effect, Oracle Social Network socially enables all of Oracle’s enterprise applications—all enterprise applications really—with not only the same features, but also the same conversations. As a result, the social conversations act as a conduit for inter-application communication and collaboration.” Source: ESG Research Report, Oracle Social Network: The Social Glue for Enterprise Applications, August 2012. cross-post from Oracle WebCenter blog

    Read the article

  • ERP Customizations...Are your CEMLI’s Holding You Back?

    - by Di Seghposs
    Upgrading your Oracle applications can be an intimidating and nerve-racking experience depending on your organization’s level of customizations. Often times they have an on-going effect on your organization causing increased complexity, less flexibility, and additional maintenance cost. Organizations that reduce their dependency on customizations: Reduce complexity by up to 50% Reduce the cost of future maintenance and upgrades  Create a foundation for easier enablement of new product functionality and business value Oracle Consulting offers a complimentary service called Oracle CEMLI Benchmark and Analysis, which is an effective first step used to evaluate your E-Business Suite application CEMLI complexity.  The service will help your organization understand the number of customizations you have, how you rank against your peer groups and identifies target areas for customization reduction by providing a catalogue of customizations by object type, CEMLI ID or Project ID and Business Process. Whether you’re currently deployed on-premise, managed private cloud or considering a move to the cloud, understanding your customizations is critical as you begin an upgrade.  Learn how you can reduce complexity and overall TCO with this informative screencast.  For more information or to take advantage of this complimentary service today, contact Oracle Consulting directly at [email protected]

    Read the article

  • Notify-osd notifications appear unthemed in top-left corner (ubuntu 13.10)

    - by Wehlutyk
    Problem I recently upgraded from 13.04 to 13.10, and suddenly notification bubbles don't appear themed as usual in the upper right corner, but they appear as white text on blue background in the upper-left corner. It looks like this: Unsuccesful attempts to fix it I tried reinstalling unity, notify-osd, ubuntu-desktop removed notification-daemon which was installed, none of that fixes it. In fact running ps aux | grep notify-osd shows that notify-osd isn't even running. But when I try to start it manually by running /usr/lib/x86_64-linux-gnu/notify-osd I get: ** (notify-osd:4618): WARNING **: Another instance has already registered org.freedesktop.Notifications ** (notify-osd:4618): WARNING **: Could not register instance If I understand well, the instance is registered by the /usr/share/dbus-1/services/org.freedesktop.Notifications.service file, which right now contains: [D-BUS Service] Name=org.freedesktop.Notifications Exec=/usr/lib/x86_64-linux-gnu/notify-osd Renaming or deleting that file (and rebooting) has no effect whatsoever (and it is not recreated automatically). This is not a duplicate of No notifications from notify-osd on 13.10 (and by the way I purged gnome-flashback-session along with notification-daemon) Question(s) How can I debug this? How can I get notifications to come back to normal? If additional debug information is needed, I'll be happy to add it (just that I can't find any more).

    Read the article

  • EM12c Release 4: Cloud Control to Major Tom...

    - by abulloch
    With the latest release of Enterprise Manager 12c, Release 4 (12.1.0.4) the EM development team has added new functionality to assist the EM Administrator to monitor the health of the EM infrastructure.   Taking feedback delivered from customers directly and through customer advisory boards some nice enhancements have been made to the “Manage Cloud Control” sections of the UI, commonly known in the EM community as “the MTM pages” (MTM stands for Monitor the Monitor).  This part of the EM Cloud Control UI is viewed by many as the mission control for EM Administrators. In this post we’ll highlight some of the new information that’s on display in these redesigned pages and explain how the information they present can help EM administrators identify potential bottlenecks or issues with the EM infrastructure. The first page we’ll take a look at is the newly designed Repository information page.  You can get to this from the main Setup menu, through Manage Cloud Control, then Repository.  Once this page loads you’ll see the new layout that includes 3 tabs containing more drill-down information. The Repository Tab The first tab, Repository, gives you a series of 6 panels or regions on screen that display key information that the EM Administrator needs to review from time to time to ensure that their infrastructure is in good health. Rather than go through every panel let’s call out a few and let you explore the others later yourself on your own EM site.  Firstly, we have the Repository Details panel. At a glance the EM Administrator can see the current version of the EM repository database and more critically, three important elements of information relating to availability and reliability :- Is the database in Archive Log mode ? Is the database using Flashback ? When was the last database backup taken ? In this test environment above the answers are not too worrying, however, Production environments should have at least Archivelog mode enabled, Flashback is a nice feature to enable prior to upgrades (for fast rollback) and all Production sites should have a backup.  In this case the backup information in the Control file indicates there’s been no recorded backups taken. The next region of interest to note on this page shows key information around the Repository configuration, specifically, the initialisation parameters (from the spfile). If you’re storing your EM Repository in a Cluster Database you can view the parameters on each individual instance using the Instance Name drop-down selector in the top right of the region. Additionally, you’ll note there is now a check performed on the active configuration to ensure that you’re using, at the very least, Oracle minimum recommended values.  Should the values in your EM Repository not meet these requirements it will be flagged in this table with a red X for non-compliance.  You can of-course change these values within EM by selecting the Database target and modifying the parameters in the spfile (and optionally, the run-time values if the parameter allows dynamic changes). The last region to call out on this page before moving on is the new look Repository Scheduler Job Status region. This region is an update of a similar region seen on previous releases of the MTM pages in Cloud Control but there’s some important new functionality that’s been added that customers have requested. First-up - Restarting Repository Jobs.  As you can see from the graphic, you can now optionally select a job (by selecting the row in the UI table element) and click on the Restart Job button to take care of any jobs which have stopped or stalled for any reason.  Previously this needed to be done at the command line using EMDIAG or through a PL/SQL package invocation.  You can now take care of this directly from within the UI. Next, you’ll see that a feature has been added to allow the EM administrator to customise the run-time for some of the background jobs that run in the Repository.  We heard from some customers that ensuring these jobs don’t clash with Production backups, etc is a key requirement.  This new functionality allows you to select the pencil icon to edit the schedule time for these more resource intensive background jobs and modify the schedule to avoid clashes like this. Moving onto the next tab, let’s select the Metrics tab. The Metrics Tab There’s some big changes here, this page contains new information regions that help the Administrator understand the direct impact the in-bound metric flows are having on the EM Repository.  Many customers have provided feedback that they are in the dark about the impact of adding new targets or large numbers of new hosts or new target types into EM and the impact this has on the Repository.  This page helps the EM Administrator get to grips with this.  Let’s take a quick look at two regions on this page. First-up there’s a bubble chart showing a comprehensive view of the top resource consumers of metric data, over the last 30 days, charted as the number of rows loaded against the number of collections for the metric.  The size of the bubble indicates a relative volume.  You can see from this example above that a quick glance shows that Host metrics are the largest inbound flow into the repository when measured by number of rows.  Closely following behind this though are a large number of collections for Oracle Weblogic Server and Application Deployment.  Taken together the Host Collections is around 0.7Mb of data.  The total information collection for Weblogic Server and Application Deployments is 0.38Mb and 0.37Mb respectively. If you want to get this information breakdown on the volume of data collected simply hover over the bubble in the chart and you’ll get a floating tooltip showing the information. Clicking on any bubble in the chart takes you one level deeper into a drill-down of the Metric collection. Doing this reveals the individual metric elements for these target types and again shows a representation of the relative cost - in terms of Number of Rows, Number of Collections and Storage cost of data for each Metric type. Looking at another panel on this page we can see a different view on this data. This view shows a view of the Top N metrics (the drop down allows you to select 10, 15 or 20) and sort them by volume of data.  In the case above we can see the largest metric collection (by volume) in this case (over the last 30 days) is the information about OS Registered Software on a Host target. Taken together, these two regions provide a powerful tool for the EM Administrator to understand the potential impact of any new targets that have been discovered and promoted into management by EM12c.  It’s a great tool for identifying the cause of a sudden increase in Repository storage consumption or Redo log and Archive log generation. Using the information on this page EM Administrators can take action to mitigate any load impact by deploying monitoring templates to the targets causing most load if appropriate.   The last tab we’ll look at on this page is the Schema tab. The Schema Tab Selecting this tab brings up a window onto the SYSMAN schema with a focus on Space usage in the EM Repository.  Understanding what tablespaces are growing, at what rate, is essential information for the EM Administrator to stay on top of managing space allocations for the EM Repository so that it works as efficiently as possible and performs well for the users.  Not least because ensuring storage is managed well ensures continued availability of EM for monitoring purposes. The first region to highlight here shows the trend of space usage for the tablespaces in the EM Repository over time.  You can see the upward trend here showing that storage in the EM Repository is being consumed on an upward trend over the last few days here. This is normal as this EM being used here is brand new with Agents being added daily to bring targets into monitoring.  If your Enterprise Manager configuration has reached a steady state over a period of time where the number of new inbound targets is relatively small, the metric collection settings are fairly uniform and standardised (using Templates and Template Collections) you’re likely to see a trend of space allocation that plateau’s. The table below the trend chart shows the Top 20 Tables/Indexes sorted descending by order of space consumed.  You can switch the trend view chart and corresponding detail table by choosing a different tablespace in the EM Repository using the drop-down picker on the top right of this region. The last region to highlight on this page is the region showing information about the Purge policies in effect in the EM Repository. This information is useful to illustrate to EM Administrators the default purge policies in effect for the different categories of information available in the EM Repository.  Of course, it’s also been a long requested feature to have the ability to modify these default retention periods.  You can also do this using this screen.  As there are interdependencies between some data elements you can’t modify retention policies on a feature by feature basis.  Instead, retention policies take categories of information and bundles them together in Groups.  Retention policies are modified at the Group Level.  Understanding the impact of this really deserves a blog post all on it’s own as modifying these can have a significant impact on both the EM Repository’s storage footprint and it’s performance.  For now, we’re just highlighting the features visibility on these new pages. As a user of EM12c we hope the new features you see here address some of the feedback that’s been given on these pages over the past few releases.  We’ll look out for any comments or feedback you have on these pages ! 

    Read the article

  • hp pavilion g6 1250 with a BCM 4313 doesn't see any wireless networks

    - by Ahmed Kotb
    i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation, ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) There are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Why does Ubuntu reset brightness settings at the loading screen?

    - by leugim
    Since I first installed Ubuntu 11.10, I noticed that volume and screen brightness get reset every time Ubuntu starts. Why is this so? And what ways are there to keep brightness and volume levels after rebooting? I have found some scripts that change the screen-brightness at login. But this is not a good solution since login is slower because it seems to wait until the screen brightness is at the level specified by the script. After entering the password I see the screen brightness go down gradually. Only after this is complete (~1 or 2 seconds) does the background disappear and Unity come up. The screenbrightness is not remembered but instead redefined at login. So it gets remembered for the first part of the boot, then set to MAX and then again re-set to normal value by the script. My boot process is as follows: desired brightness: 2 (13,33%) / Max brightness: 15 (100%) Bios / brightness: OK GRUB (violet background color, white text) / brightness: OK Ubuntu loading screen with the dots / brightness: MAX (win7 loads with OK-brightness) User Login / brightness: MAX Unity starts / brightness: OK It seems to be more like a temporary patch than a actual solution. I'm looking for solutions that set the desired brightness permanently and consistently throughout the whole boot-process After updating to 12.04 the behavior is the same. I tried setpci -s 02:00.0 F4.B=XX The value of F4.B is always '0' regardless of what value I try to set it to (tried 0, ff, f, 5, etc) The solution in this answer does not have any noticeable effect: Desktop doesn't remember brightness settings after a reboot The variables at /sys/class/backlight/acpi_video0/ get changed if I use Fn+UP and Fn+DOWN Any help is appreciated. Thanks!

    Read the article

  • On contract work, obligations to said contract, and looking out for yourself…

    - by jlnorsworthy
    Without boring you all with details, my last two contract assignments were cut short; I was given 3 days notice on one, and 4 weeks notice on the other. Neither of these were due to performance – they both basically came down budget issues. On my second contract, I got the feeling that I may not have been a great place to stay for the duration of my contract. Because of money/time spent getting me in the door, and the possible negative effect of my employer/recruiter, I decided to stay at least for a few months (and start looking several weeks before the end of my supposedly “extendable” contract). These experiences have left me a little wary of contract work. It seems that if I land a bad contract, that my recruiter would take a hit (reputation or otherwise) if I quickly found another job. But on the other hand, the client company won’t think twice of ending the contract early for any reason. I know that the counter argument to this is “maybe your recruiter shouldn’t have put you into a crappy assignment”… either way, it seems that since I am relying on him to provide me with work, that I should try to not damage his reputation with client companies. I’m basically brand new to contracting (these were my first two contracts) so these concerns are new to me. TLDR: Is contract work, by its very nature, largely unstable? Am I worried too much about my recruiter? Should I be quicker to start looking for a new job even after just weeks at a new company (when the environment seems unstable)? If so, do I look through my recruiter or just find another position by any means necessary?

    Read the article

  • How do I install the newest Flash beta for Minefield on 64-bit Ubuntu?

    - by Øsse
    Hi, I'm using a fully updated Ubuntu 10.10 64-bit which is pretty much bog standard except I'm using Minefield from the Mozilla daily PPA in addition to Firefox as provided by Ubuntu. I want to try the newest beta of Flash (10.3 as of writing). The installation instructions simply say "drop libflashplayer.so into the plugin folder of your browser". This the 32-bit version. Currently I'm using Flash as provided by the package flashplugin-installer (ver. 10.2.152.27ubuntu0.10.10.1). Going to about:plugins in Minefield/Firefox says the version of Flash I'm running is 10.2 r152 and the file responsible is npwrapper.libflashplayer.so. I have two files with that name on my system. One is /usr/share/ubufox/plugins/npwrapper.libflashplayer.so which is a broken link to /usr/lib/flashplugin-installer/npwrapper.libflashplayer.so. The other is /var/lib/flashplugin-installer/npwrapper.libflashplayer.so (note var instead of usr). I also have a file simply called libflashplayer.so in /usr/lib/flashplugin-installer/. So it seems Firefox/Minefield gets its Flash plugin from a file that doesn't exist, and replacing libflashplayer.so with the one in the archive from Adobe has no effect. Since I want to try the 32-bit version I have to use the wrapper. The only way I know how is through the flashplugin-installer package. How would I go about installing the newest 32-bit beta Flash if possible at all? And where is "the plugin folder of my browser"?

    Read the article

  • GPLv2 - Multiple AI chess engines to bypass GPL

    - by Dogbert
    I have gone through a number of GPL-related questions, the most recent being this one: http://stackoverflow.com/questions/3248823/legal-question-about-the-gpl-license-net-dlls/3249001#3249001 I'm trying to see how this would work, so bear with me. I have a simple GUI interface for a game of Chess. It essentially can send/receive commands to/from an external chess engine (ie: Tong, Fruit, etc). The application/GUI is similar in nature to XBoard ( http://www.gnu.org/software/xboard/ ), but was independently designed. After going through a number of threads on this topic, it seems that the FSF considers dynamically linking against a GPLv2 library as a derivative work, and that by doing so, the GPLv2 extends to my proprietary code, and I must release the source to my entire project. Other legal precedents indicate the opposite, and that dynamic linking doesn't cause the "viral" effect of the GPL to propagate to my proprietary code. Since there is no official consensus that can give a "hard-and-fast" answer to the dynamic linking question, would this be an acceptable alternative: I build my chess GUI so that it sends/receives the chess engine AI logic as text commands from an external interface library that I write The interface library I wrote itself is then released under the GPL The interface library is only used to communicate via a generic text pipe to external command-line chess engines The chess engine itself would be built as a command-line utility rather than as a library of any sort, and just sends strings in the Universal Chess Interface of Chess Engine Communication Protocol ( http://en.wikipedia.org/wiki/Chess_Engine_Communication_Protocol ) format. The one "gotcha" is that the interface library should not be specific to one single GPL'ed chess engine, otherwise the entire GUI would be "entirely dependent" on it. So, I just make my interface library so that it is able to connect to any command-line chess engine that uses a specific format, rather than just one unique engine. I could then include pre-built command-line-app versions of any of the chess engines I'm using. Would that sort of approach allow me to do the following: NOT release the source for my UI Release the source of the interface library I built (if necessary) Use one or more chess engines and bundle them as external command-line utilities that ship with a binary version of my UI Thank you.

    Read the article

  • CodePlex Daily Summary for Wednesday, June 01, 2011

    CodePlex Daily Summary for Wednesday, June 01, 2011Popular ReleasesVidCoder: 0.9.1: Added color coding to the Log window. Errors are highlighted in red, HandBrake logs are in black and VidCoder logs are in dark blue. Moved enqueue button to the right with the other control buttons. Added logic to report failures when errors are logged during the encode or when the encode finishes prematurely. Added Copy button to Log window. Adjusted audio track selection box to always show the full track name. Changed encode job progress bar to also be colored yellow when the enco...Terraria Map Generator: TerrariaMapTool 1.0.0.3 Beta: 1) Catch all exception from the gui app. 2) Fixed the use of the graphics device to really use reach.AutoLoL: AutoLoL v2.0.1: - Fixed a small bug in Auto Login - Fixed the updaterEPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.9.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the server This version has been updated to .Net Framework 3.5 New Features Data Validation. PivotTables (Basic functionalliy...) Support for worksheet data sources. Column, Row, Page and Data fields. Date and Numeric grouping Build in styles. ...and more And some minor new features... Ranges Text-Property|Get the formated value AutofitColumns-method to set the column width from the content of the range LoadFromCollection-metho...jQuery ASP.Net MVC Controls: Version 1.4.0.0: Version 1.4.0.0 contains the following additions: Upgraded to MVC 3.0 Upgraded to jQuery 1.6.1 (Though the project supports all jQuery version from 1.4.x onwards) Upgraded to jqGrid 3.8 Better Razor View-Engine support Better Pager support, includes support for custom pagers Added jqGrid toolbar buttons support Search module refactored, with full suport for multiple filters and ordering And Code cleanup, bug-fixes and better controller configuration support.Restbucks on .Net: RestBucks Alpha 1: This is the first release of the application.Nearforums - ASP.NET MVC forum engine: Nearforums v6.0: Version 6.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Authentication using Membership Provider for SQL Server and MySql Spam prevention: Flood Control Moderation: Flag messages Content management: Pages: Create pages (about us/contact/texts) through web administration Allow nearforums to run as an IIS subapp Migrated Facebook Connect to OAuth 2.0 Visit the project Roadmap for more details.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.8b: Changes: - fix critical issue 15922(AccessViolationException) once and for all update is strongly recommended Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddin Examples in C# and VB....Facebook Graph Toolkit: Facebook Graph Toolkit 1.5.4186: Updates the API in response to Facebook's recent change of policy: All Graph Api accessing feeds or posts must provide a AccessToken.SharePoint Farm Poster: SharePoint Farm Poster: SharePoint Farm Poster is generated by a PowerShell Script. Run this script under the Farm Admin Account. After downloading, unblock the file in the Property Window. Current version is beta : v0.3.4Serviio for Windows Home Server: Beta Release 0.5.2.0: Ready for widespread beta. Synchronized build number to Serviio version to avoid confusion.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta4: ??AcDown?????????????,??????????????,????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??v3.0 Beta4 2011-5-31?? ???Bilibili.us????? ???? ?? ???"????" ???Bilibili.us??? ??????? ?? ??????? ?? ???????? ?? ?? ???Bilibili.us?????(??????????????????) ??????(6.cn)?????(????) ?? ?????Acfun?????????? ?????????????? ???QQ???????? ????????????Discussion...EnhSim: EnhSim 2.4.5 ALPHA: 2.4.5 ALPHAThis release supports WoW patch 4.1 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the T12 s...TerrariViewer: TerrariViewer v2.4.1: Added Piggy Bank editor and fixed some minor bugs.Kooboo CMS: Kooboo CMS 3.02: What is new in kooboo cms 3.02 The most important updates of this version is the Kooboo site builder, an unique and creative web design tool, design an professional website and export to Kooboo CMS. See: http://www.sitekin.com Add Version contorl on View, Layout and other elements. Add user CMS language selection, user can select a language to use on their CMS backend. Add User profile provider, you can use now stop website user information on a SQL database. Previously it stored on XML...mojoPortal: 2.3.6.6: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2366-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Terraria World Creator: Terraria World Creator: Version 1.01 Fixed a bug that would cause the application to crash. Re-named the Application.Microsoft All-In-One Code Framework - a centralized code sample library: All-In-One Code Framework 2011-05-26: Alternatively, you can install Sample Browser or Sample Browser VS extension, and download the code samples from Sample Browser. Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for Dynamics Sample Description Owner CSDynamicsNAVWebServices The code sample shows syntax for calling Dynamics NAV Web Services. Lars Lohndorf-Larsen NEW Samples for WPF Sample Description Owner CSWPFDataGridCustomS...Terraria World Viewer: Version 1.1: Update May 26th Added Chest Filtering, this allows chests only containing certain items to have their symbol drawn. (Its under advanced settings tab) GUI elements (checkboxes/etc) are persistant between uses of the application Beta Worlds (i.e. Release #38) will work properly Symbols can be enabled or disabled on a per symbol basis Chest Information tab which is just a dump of the current chest information Meterorite is now visible as a bright magenta pink Application defaults to ...MVC Controls Toolkit: Mvc Controls Toolkit 1.1 RC: *Added: Compatibility with jQuery 1.6.1 Rendering of enumerables with images and/or customizable strings improved the client side tempate engine added new parameters to the template definition binding all new knockout bindings helpers have been fully implemented added a new overload for defining the client-side ViewModel The SetTme method has the option to store the theme in a permanent cookie If no CSS class is provided for the watermark of a TypedTextBox the watermark class of the current t...New ProjectsAlumnus SI Machung: ExSis Alumnus Website makes it easier for Alumni of Ma Chung University, that located at Malang, East Java, Indonesia. You'll no longer have to find your friend that separated in so many years. It's developed in Microsoft Visual Studio 2010. Check our website at kriswanto90.charlezzzz.comb9b18a35-a80a-440c-bb8c-195be0225cfa: b9b18a35-a80a-440c-bb8c-195be0225cfaCustomer Care Portal - SharePoint 2010 for Internet Sites: The Customer Care Portal demonstrates cooperation of Microsoft SharePoint 2010 with several technologies, such as: • Silverlight • Windows Server AppFabric • Business Data Connectivity • Microsoft InfoPath 2010 DBServer Folder Browser: DBServer Folder Browser It's developed in C#Dual Development: A place for colloboration.EVMDOCS ASP.NET: EVMDOCS project for ECM.VSTU.RU FCNS.Money: FCNS.Money?????????????。???,?????????????,??????????????。???????????????? ??,?FCNS.Money??????????????,???????????,????????????????,??????????,???? ???????????。HDBMS: Attempt to implement a hierarchical database that can participate in a distributed 2PCHRO: 3D FPS in a secret underwater soviet bunkerIstream: Istream is a new web browser for windows computers. We have designed the browser so you have everything right at your fingertips. Download it today and discover a new browsing experience, we have a range of features avaialble just now and its only the first release. istream.imLaptop Battery Usage Pattern: Figures out battery discharge and recharge pattern. Suggests estimated discharge time and recharge time based on past history. Also alerts when it detects considerable degradation of battery life. Mediawiki tools for Office: The current version installs an Outlook 2007 plugin. This plugin adds a send to wiki command to the outlook context menu. The functionality is very similar to the behavior of the One Note plugin which is installed in office 2007. PW API Library: The PW API Library provides a .NET interface to the ProgrammableWeb's API library. This is a personal project built using the ProgrammableWeb internal API and is not provided by the ProgrammableWeb team. It's developed in C# using .NET 4.0 framework.Restbucks on .Net: Implementation of the RestBucks example; from the book "Rest on Practice" on the .Net plattaform.SharePoint Farm Poster: View the entire SharePoint Farm configuration as a single HTML Poster.Simple Silverlight Bounce Effect: Simple bounce effect in Silverlight. A demo of this project can be seen at http://www.voltar.ch/en/results/technologieSistema Gestor Escolar: Aquesta aplicacio permet gestionar activitats pròpies d'una escolaSmart WCF Client Wrapper: This is a smart WCF client wrapper that keeps your code clean, and hides common beginner mistakes from the end user. This code handles - EventHandler Cleanup - Exception Managment - Reliable and efficient reuse of the proxy - Cleanup of the proxy - Clean "using(...)" methodSSIS Extensions - SFTP Task, PGP Task, Zip Task: A set of custom tasks to extend SSIS. Includes a SFTP task, PGP encryption task and zip/unzip task.TFS On The Road: TFS On The Road is a TFS client for Windows Phone 7. With it you can have a good view from your TFS even if you are "on the road". It allows you to access projects, work items(including attachments), changesets, builds, branches, and work item queries.Todo.txt .NET: .NET version of Todo.txt. The project goals are a Windows application as well as a PowerShell commands.

    Read the article

  • hp pavilion g6 1250 wireless problems

    - by Ahmed Kotb
    i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation , ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) there are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Can I save & store a user's submission in a way that proves that the data has not been altered, and that the timestamp is accurate?

    - by jt0dd
    There are many situations where the validity of the timestamp attached to a certain post (submission of information) might be invaluable for the post owner's legal usage. I'm not looking for a service to achieve this, as requested in this great question, but rather a method for the achievement of such a service. For the legal (in most any law system) authentication of text content and its submission time, the owner of the content would need to prove: that the timestamp itself has not been altered and was accurate to begin with. that the text content linked to the timestamp had not been altered I'd like to know how to achieve this via programming (not a language-specific solution, but rather the methodology behind the solution). Can a timestamp be validated to being accurate to the time that the content was really submitted? Can data be stored in a form that it can be read, but not written to, in a proven way? In other words, can I save & store a user's submission in a way that proves that the data has not been altered, and that the timestamp is accurate? I can't think of any programming method that would make this possible, but I am not the most experienced programmer out there. Based on MidnightLightning's answer to the question I cited, this sort of thing is being done. Clarification: I'm looking for a method (hashing, encryption, etc) that would allow an average guy like me to achieve the desired effect through programming. I'm interested in this subject for the purpose of Defensive Publication. I'd like to learn a method that allows an every-day programmer to pick up his computer, write a program, pass information through it, and say: I created this text at this moment in time, and I can prove it. This means the information should be protected from the programmer who writes the code as well. Perhaps a 3rd party API would be required. I'm ok with that.

    Read the article

  • Silverlight Cream for May 29, 2010 -- #872

    - by Dave Campbell
    In this Issue: Michael Washington, Chris Koenig, Kunal Chowdhury, SilverLaw, Shayne Burgess, Ian T. Lackey, Alan Beasley, Marlon Grech. Shoutouts: Ozymandias has a post up that's not Silverlight necessarily, but it's pretty cool: Typeface Selection Flowchart Damian Schenkelman posted about the latest: Prism 2.2 Release available. Get it at Codeplex. From SilverlightCream.com: Silverlight 4 OData Paging with RX Extensions Michael Washington continues with this OData and Rx post using the View Model Style. Michael has some good external links, good info, and all the code. WP7 Part 4: Morphing and Mapping Chris Koenig has the 4th in his WP7 series he's doing, and this one is on MVVMLight and BingMaps ... code included. Silverlight 4: Interoperability with Excel using the COM Object Kunal Chowdhury has a post up about Excel Interoperability using the COM object including opening an Excel Workbook and writing data out, then modifying the data in the spreadsheet and seeing it updated in the app. Creating A Flexible Surface Effect – Silverlight 4 (Part 1) SilverLaw put up a demo of an awesome 'water ripple' SL4 demo a couple days ago, and now he's got part 1 of a great tutorial explaining it all. Service Operations and the WCF Data Services Client Shayne Burgess has a post up about Service Operations and how they can be used by the WCF Data Services client. Role Based Silverlight Behaviors Also from the Open Light Group, Ian T. Lackey has a post up about Behaviors that takes a list of roles and updates the UI appropriatetly. How to Toggle (Show/Hide) using Behaviours (Behaviors) between Visual States or Storyboards in Expression Blend for Windows Phone Alan Beasley has a quick post up talking about the solution he found to a problem he was having with state switching in a WP7 app. MEFedMVVM: Testability Marlon Grech has another MEFedMVVM post up and he's discussing Testability all rolled in there with everything else :) Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Performance-Driven Development

    - by BuckWoody
    I was reading a blog yesterday about the evils of SELECT *. The author pointed out that it's almost always a bad idea to use SELECT * for a query, but in the case of SQL Azure (or any cloud database, for that matter) it's especially bad, since you're paying for each transmission that comes down the line. A very good point indeed. This got me to thinking - shouldn't we treat ALL programming that way? In other words, wouldn't it make sense to pretend that we are paying for every chunk of data - a little less for a bit, a lot more for a BLOB or VARCHAR(MAX), that sort of thing? In effect, we really are paying for that. Which led me to the thought of Performance-Driven Development, or the act of programming with the goal of having the fastest code from the very outset. This isn't an original title, since a quick Bing-search shows me a couple of offerings from Forrester and a professional in Israel who already used that title, but the general idea I'm thinking of is assigning a "cost" to each code round-trip, be it network, storage, trip time and other variables, and then rewarding the developers that come up with the fastest code. I wonder what kind of throughput and round-trip times you could get if your developers were paid on a scale of how fast the application performed... Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Mod Rewrite - directing HTTP/HTTPS traffic to the appropriate virtual hosts

    - by kce
    I have an Apache2 web server (v. 2.2.16) running on Debian hosting three virtual hosts. The first two hosts are HTTP only (server1 and server2). The last host is HTTPS only (server3). My virtual host configuration files can be found at pastebin. I would like to use mod rewrite to get the following behavior: Any request for http://server3 is re-directed to https://server3 Any request for either https://server1 or https://server2 is re-directed to http://server1 or http://server2 as appropriate. Currently, requesting http://server3 gives you a 403 because indexing is disabled for that host and a request for https://server1 or https://server2 will resolve as https://server3 (as its the only virtual host running SSL). This behavior is not desirable. So far I have added a rewrite rule to the central configuration file (myServerWideConfs.conf), with unfortunately no effect. I was under the impression that this rule (or something similar) should rewrite all https:// requests for server1 and server2 to the proper http:// request. RewriteEngine On RewriteCond %{HTTP_HOST} !^server3 [NC] RewriteRule (.*) http://%{HTTP_HOST} My question is two-fold: What mod rewrite rules should I use to accomplish this? And where should they go? Debian's packaging of Apache has a pretty granular (i.e., fractured) configuration file layout; should my rewrite rules go in /etc/apache2/apache2.conf, /etc/apache2/conf.d/myServerWideConfs.conf, or the individual virtual host files? Is mod rewrite the right tool to accomplish this or am I missing something in my greater apache configuration?

    Read the article

  • How can I author objects with perspective that fit into a tile-based map but span multiple tiles?

    - by Growler
    I'm creating a tilemap city and trying to figure out the most efficient way to create unique building scenes. The trick is, I need to maintain a sort of 2D, almost-top-down perspective, which is hard to do with buildings or large objects that span multiple tiles. I've tried doing three buildings at a time, and mixing and matching the base layer and colors, like this: This creates a weird overlapping effect, and also doesn't seem that efficient from a production standpoint. But it was the best way to have shadows appear correctly on the neighboring buildings. I'm wondering if modular buildings would be the way to go? That way I can mix and match any set of buildings together as tiles: I guess I would have to risk some perspective and shadowing to get the buildings to align correctly. What sort of authoring process could I use to allow me to create a variety of buildings (or other objects) that maintain this perspective while spanning multiple tiles worth of screen space? Would you recommend creating blank buildings, and then affixing art overlays as necessary to make the buildings unique? Or should they be directly part of the building tile (for example, create a separate tileset of buildings signs and colorings)?

    Read the article

  • Stencil mask with AlphaTestEffect

    - by Brendan Wanlass
    I am trying to pull off the following effect in XNA 4.0: http://eng.utah.edu/~brendanw/question.jpg The purple area has 50% opacity. I have gotten pretty close with the following code: public static DepthStencilState AlwaysStencilState = new DepthStencilState() { StencilEnable = true, StencilFunction = CompareFunction.Always, StencilPass = StencilOperation.Replace, ReferenceStencil = 1, DepthBufferEnable = false, }; public static DepthStencilState EqualStencilState = new DepthStencilState() { StencilEnable = true, StencilFunction = CompareFunction.Equal, StencilPass = StencilOperation.Keep, ReferenceStencil = 1, DepthBufferEnable = false, }; ... if (_alphaEffect == null) { _alphaEffect = new AlphaTestEffect(_spriteBatch.GraphicsDevice); _alphaEffect.AlphaFunction = CompareFunction.LessEqual; _alphaEffect.ReferenceAlpha = 129; Matrix projection = Matrix.CreateOrthographicOffCenter(0, _spriteBatch.GraphicsDevice.PresentationParameters.BackBufferWidth, _spriteBatch.GraphicsDevice.PresentationParameters.BackBufferHeight, 0, 0, 1); _alphaEffect.Projection = world.SystemManager.GetSystem<RenderSystem>().Camera.View * projection; } _mask = new RenderTarget2D(_spriteBatch.GraphicsDevice, _spriteBatch.GraphicsDevice.PresentationParameters.BackBufferWidth, _spriteBatch.GraphicsDevice.PresentationParameters.BackBufferHeight, false, SurfaceFormat.Color, DepthFormat.Depth24Stencil8); _spriteBatch.GraphicsDevice.SetRenderTarget(_mask); _spriteBatch.GraphicsDevice.Clear(ClearOptions.Target | ClearOptions.Stencil, Color.Transparent, 0, 0); _spriteBatch.Begin(SpriteSortMode.Immediate, null, null, AlwaysStencilState, null, _alphaEffect); _spriteBatch.Draw(sprite.Texture, position, sprite.SourceRectangle,Color.White, 0f, sprite.Origin, 1f, SpriteEffects.None, 0); _spriteBatch.End(); _spriteBatch.Begin(SpriteSortMode.Immediate, null, null, EqualStencilState, null, null); _spriteBatch.Draw(_maskTex, new Vector2(x * _maskTex.Width, y * _maskTex.Height), null, Color.White, 0f, Vector2.Zero, 1f, SpriteEffects.None, 0); _spriteBatch.End(); _spriteBatch.GraphicsDevice.SetRenderTarget(null); _spriteBatch.GraphicsDevice.Clear(Color.Black); _spriteBatch.Begin(); _spriteBatch.Draw((Texture2D)_mask, Vector2.Zero, null, Color.White, 0f, Vector2.Zero, 1f, SpriteEffects.None, layer/max_layer); _spriteBatch.End(); My problem is, I can't get the AlphaTestEffect to behave. I can either mask over the semi-transparent purple junk and fill it in with the green design, or I can draw over the completely opaque grassy texture. How can I specify the exact opacity that needs to be replace with the green design?

    Read the article

  • Spooling in SQL execution plans

    - by Rob Farley
    Sewing has never been my thing. I barely even know the terminology, and when discussing this with American friends, I even found out that half the words that Americans use are different to the words that English and Australian people use. That said – let’s talk about spools! In particular, the Spool operators that you find in some SQL execution plans. This post is for T-SQL Tuesday, hosted this month by me! I’ve chosen to write about spools because they seem to get a bad rap (even in my song I used the line “There’s spooling from a CTE, they’ve got recursion needlessly”). I figured it was worth covering some of what spools are about, and hopefully explain why they are remarkably necessary, and generally very useful. If you have a look at the Books Online page about Plan Operators, at http://msdn.microsoft.com/en-us/library/ms191158.aspx, and do a search for the word ‘spool’, you’ll notice it says there are 46 matches. 46! Yeah, that’s what I thought too... Spooling is mentioned in several operators: Eager Spool, Lazy Spool, Index Spool (sometimes called a Nonclustered Index Spool), Row Count Spool, Spool, Table Spool, and Window Spool (oh, and Cache, which is a special kind of spool for a single row, but as it isn’t used in SQL 2012, I won’t describe it any further here). Spool, Table Spool, Index Spool, Window Spool and Row Count Spool are all physical operators, whereas Eager Spool and Lazy Spool are logical operators, describing the way that the other spools work. For example, you might see a Table Spool which is either Eager or Lazy. A Window Spool can actually act as both, as I’ll mention in a moment. In sewing, cotton is put onto a spool to make it more useful. You might buy it in bulk on a cone, but if you’re going to be using a sewing machine, then you quite probably want to have it on a spool or bobbin, which allows it to be used in a more effective way. This is the picture that I want you to think about in relation to your data. I’m sure you use spools every time you use your sewing machine. I know I do. I can’t think of a time when I’ve got out my sewing machine to do some sewing and haven’t used a spool. However, I often run SQL queries that don’t use spools. You see, the data that is consumed by my query is typically in a useful state without a spool. It’s like I can just sew with my cotton despite it not being on a spool! Many of my favourite features in T-SQL do like to use spools though. This looks like a very similar query to before, but includes an OVER clause to return a column telling me the number of rows in my data set. I’ll describe what’s going on in a few paragraphs’ time. So what does a Spool operator actually do? The spool operator consumes a set of data, and stores it in a temporary structure, in the tempdb database. This structure is typically either a Table (ie, a heap), or an Index (ie, a b-tree). If no data is actually needed from it, then it could also be a Row Count spool, which only stores the number of rows that the spool operator consumes. A Window Spool is another option if the data being consumed is tightly linked to windows of data, such as when the ROWS/RANGE clause of the OVER clause is being used. You could maybe think about the type of spool being like whether the cotton is going onto a small bobbin to fit in the base of the sewing machine, or whether it’s a larger spool for the top. A Table or Index Spool is either Eager or Lazy in nature. Eager and Lazy are Logical operators, which talk more about the behaviour, rather than the physical operation. If I’m sewing, I can either be all enthusiastic and get all my cotton onto the spool before I start, or I can do it as I need it. “Lazy” might not the be the best word to describe a person – in the SQL world it describes the idea of either fetching all the rows to build up the whole spool when the operator is called (Eager), or populating the spool only as it’s needed (Lazy). Window Spools are both physical and logical. They’re eager on a per-window basis, but lazy between windows. And when is it needed? The way I see it, spools are needed for two reasons. 1 – When data is going to be needed AGAIN. 2 – When data needs to be kept away from the original source. If you’re someone that writes long stored procedures, you are probably quite aware of the second scenario. I see plenty of stored procedures being written this way – where the query writer populates a temporary table, so that they can make updates to it without risking the original table. SQL does this too. Imagine I’m updating my contact list, and some of my changes move data to later in the book. If I’m not careful, I might update the same row a second time (or even enter an infinite loop, updating it over and over). A spool can make sure that I don’t, by using a copy of the data. This problem is known as the Halloween Effect (not because it’s spooky, but because it was discovered in late October one year). As I’m sure you can imagine, the kind of spool you’d need to protect against the Halloween Effect would be eager, because if you’re only handling one row at a time, then you’re not providing the protection... An eager spool will block the flow of data, waiting until it has fetched all the data before serving it up to the operator that called it. In the query below I’m forcing the Query Optimizer to use an index which would be upset if the Name column values got changed, and we see that before any data is fetched, a spool is created to load the data into. This doesn’t stop the index being maintained, but it does mean that the index is protected from the changes that are being done. There are plenty of times, though, when you need data repeatedly. Consider the query I put above. A simple join, but then counting the number of rows that came through. The way that this has executed (be it ideal or not), is to ask that a Table Spool be populated. That’s the Table Spool operator on the top row. That spool can produce the same set of rows repeatedly. This is the behaviour that we see in the bottom half of the plan. In the bottom half of the plan, we see that the a join is being done between the rows that are being sourced from the spool – one being aggregated and one not – producing the columns that we need for the query. Table v Index When considering whether to use a Table Spool or an Index Spool, the question that the Query Optimizer needs to answer is whether there is sufficient benefit to storing the data in a b-tree. The idea of having data in indexes is great, but of course there is a cost to maintaining them. Here we’re creating a temporary structure for data, and there is a cost associated with populating each row into its correct position according to a b-tree, as opposed to simply adding it to the end of the list of rows in a heap. Using a b-tree could even result in page-splits as the b-tree is populated, so there had better be a reason to use that kind of structure. That all depends on how the data is going to be used in other parts of the plan. If you’ve ever thought that you could use a temporary index for a particular query, well this is it – and the Query Optimizer can do that if it thinks it’s worthwhile. It’s worth noting that just because a Spool is populated using an Index Spool, it can still be fetched using a Table Spool. The details about whether or not a Spool used as a source shows as a Table Spool or an Index Spool is more about whether a Seek predicate is used, rather than on the underlying structure. Recursive CTE I’ve already shown you an example of spooling when the OVER clause is used. You might see them being used whenever you have data that is needed multiple times, and CTEs are quite common here. With the definition of a set of data described in a CTE, if the query writer is leveraging this by referring to the CTE multiple times, and there’s no simplification to be leveraged, a spool could theoretically be used to avoid reapplying the CTE’s logic. Annoyingly, this doesn’t happen. Consider this query, which really looks like it’s using the same data twice. I’m creating a set of data (which is completely deterministic, by the way), and then joining it back to itself. There seems to be no reason why it shouldn’t use a spool for the set described by the CTE, but it doesn’t. On the other hand, if we don’t pull as many columns back, we might see a very different plan. You see, CTEs, like all sub-queries, are simplified out to figure out the best way of executing the whole query. My example is somewhat contrived, and although there are plenty of cases when it’s nice to give the Query Optimizer hints about how to execute queries, it usually doesn’t do a bad job, even without spooling (and you can always use a temporary table). When recursion is used, though, spooling should be expected. Consider what we’re asking for in a recursive CTE. We’re telling the system to construct a set of data using an initial query, and then use set as a source for another query, piping this back into the same set and back around. It’s very much a spool. The analogy of cotton is long gone here, as the idea of having a continual loop of cotton feeding onto a spool and off again doesn’t quite fit, but that’s what we have here. Data is being fed onto the spool, and getting pulled out a second time when the spool is used as a source. (This query is running on AdventureWorks, which has a ManagerID column in HumanResources.Employee, not AdventureWorks2012) The Index Spool operator is sucking rows into it – lazily. It has to be lazy, because at the start, there’s only one row to be had. However, as rows get populated onto the spool, the Table Spool operator on the right can return rows when asked, ending up with more rows (potentially) getting back onto the spool, ready for the next round. (The Assert operator is merely checking to see if we’ve reached the MAXRECURSION point – it vanishes if you use OPTION (MAXRECURSION 0), which you can try yourself if you like). Spools are useful. Don’t lose sight of that. Every time you use temporary tables or table variables in a stored procedure, you’re essentially doing the same – don’t get upset at the Query Optimizer for doing so, even if you think the spool looks like an expensive part of the query. I hope you’re enjoying this T-SQL Tuesday. Why not head over to my post that is hosting it this month to read about some other plan operators? At some point I’ll write a summary post – once I have you should find a comment below pointing at it. @rob_farley

    Read the article

  • Hot to get website/product reviews reflected in Google's search results using review-aggregate format

    - by BasP
    I am managing a website called Rent A Boat Amsterdam. We have a system that gathers reviews from people that have used our services and that publishes these customer reviews making them available for all website visitors. When these customer reviews are published we have placed them within the appropriate tags according to the guidelines set by Google, which you can find here. An example looks like this: <li class="" style="clear:both;"> <div class="hreview"> <div class="item" style="display:none;"><span class="fn">Boatname</span></div> <div style="border:1px solid #DEDEDE; background-color:#D9FFD4; margin:0 10px 10px 0; float:left; text-align:center; padding:10px; height:50px; width:70px;"><h1><span class="rating">10</span></h1>9-Jun-2010</div> <div> <div class="description"><p>Great canal Cruise!</p></div> <p class="reviewer vcard"><strong><span class="fn">First name Last name</span></strong></p> </div> </div> We have implemented these tags a couple of months ago, but there are no visible results in the Google SERP's. This whilst I had expected to find the reviews / ratings displayed similar to: Is anyone familiar with this topic and able to help me find the answer to the question why the review-aggregate format doesn't seem to have the desired effect?

    Read the article

  • Reclaim Vertical UI Space by Moving Your Tabs to the Side in Firefox

    - by Asian Angel
    Are you looking for a way to move your tabs to the side in Firefox and gain access to more vertical UI space? The Vertical Tabs extension for Firefox lets you accomplish both in a matter of moments. As soon as you install the extension and restart Firefox the Tab Bar will be automatically converted into a shiny new Vertical Tabs Sidebar. All that you have to do is start enjoying the extra vertical UI space. Some things to keep in mind when using the extension are: You can easily adjust the width of the sidebar to suit your needs using the mouse (very nice!) The Firefox Menu Button, Panorama Button, and Tab Control controls move to the bottom of the sidebar (see screenshot above) You can group tabs if needed or desired There is no option available to move the sidebar to the right side of the browser at the moment The use of Personas themes (or other themes) may affect how the text for the tabs will look (i.e. a slightly fuzzy shadow effect when not selected as seen in the screenshot above) Note: Works with Firefox 4.0b7 – 4.0.* Install the Vertical Tabs Extension [Mozilla Add-ons] Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) Reclaim Vertical UI Space by Moving Your Tabs to the Side in Firefox Wind and Water: Puzzle Battles – An Awesome Game for Linux and Windows How Star Wars Changed the World [Infographic] Tabs Visual Manager Adds Thumbnailed Tab Switching to Chrome Daisies and Rye Swaying in the Summer Wind Wallpaper Read On Phone Pushes Data from Your Desktop to the Appropriate Android App

    Read the article

  • How to set TextureFilter to Point to make example Bloom filter work?

    - by Mr Bell
    I have simple app that renders some particles and now I am trying to apply the bloom shader from the xna samplers ( http://create.msdn.com/en-US/education/catalog/sample/bloom ) to it, but I am running into this exception: "XNA Framework HiDef profile requires TextureFilter to be Point when using texture format Vector4." When the BloomComponent tries to end the sprite batch in the DrawFullscreenQuad method: spriteBatch.Begin(0, BlendState.Opaque, SamplerState.PointWrap, null, null, effect); spriteBatch.Draw(texture, new Rectangle(0, 0, width, height), Color.White); spriteBatch.End(); //<------- Exception thrown here It seems to be related to the pixel shaders that I am using to animate the particle. In a nutshell, I have a texture2d in vector4 format that holds particle positions, and another one for velocities. Here is a snippet from that area: GraphicsDevice.SetRenderTarget(tempRenderTarget); animationEffect.CurrentTechnique = animationEffect.Techniques[technique]; spriteBatch.Begin(SpriteSortMode.Immediate, BlendState.Opaque, SamplerState.PointWrap, DepthStencilState.DepthRead, RasterizerState.CullNone, animationEffect); spriteBatch.Draw(randomValues, new Rectangle(0, 0, width, height), Color.White); spriteBatch.End(); What I comment out the code that calls the particle animation pixel shaders the bloom component runs fine. Is there some state that I need to reset to make the bloom work?

    Read the article

  • Inevitable Corporate Bureaucracy

    - by Ahsan Alam
    Top executives of most smaller organizations want their companies to be different from the larger corporations. They want their organizations smaller in size; but bigger in productivity by eliminating red tapes and corporate bureaucracy. When the company is smaller, people often work like firefighters – taking on new business and technology challenges without thinking about any procedures and guidelines. People also tend to wear many hats to accomplish tasks quickly in order to integrate new businesses. For example, software developers in smaller organizations may take on responsibilities of client interactions, requirements gathering, design and development, code deployment, production support, network infrastructure support, database design and maintenance along with countless other duties. In addition, systems in smaller organizations tend to be loosely guarded. So, people often don't follow many procedures in order to setup environments and implement technical projects. It's not uncommon to change code and deploy without anyone realizing. Similarly, business requirements may also get defined in an informal manner without any type of documentation. As the company grows, everything starts to change significantly impacting people and the overall business process. Suddenly, following procedures become extremely important. Consequently, new roles, guidelines and procedures start to emerge. Everything from business process to technology implementation start to become more and more process oriented. Organizations start to define and document steps, invent procedure to track process and systems level changes, and start restricting access to various systems for security reasons. At the same time, as a growing company start doing businesses with larger clienteles, they are automatically forced to abide by all sorts of industry compliance laws. Moreover, growing companies tend to recruit experienced individuals to fill new roles who usually bring their expertise from larger and more bureaucratic organizations.   Despite the best efforts from the top executives, it seems increased number of procedures and guidelines as well as new recruits automatically contribute to the evolution of corporate bureaucracy. Maybe, corporate bureaucracy is an inevitable side effect of a growing organization.

    Read the article

  • How Do Nautilus Album Art Thumbnails work?

    - by Amir Adar
    There's something for which I've been searching an answer for a while now, but to no avail, and it's strange to me, as it seems like a thing that people would talk about: one of those nice little nonsense that enhance the computing experience a little bit. Anyway. I have a fair music collection. I save all the songs as ogg files. All is fine, and I can listen to the files, but there's something weird with the files in Nautilus: some have icons displaying their album art, while others don't, and I just can't understand WHY. I read on this site today that it's a matter of embedding the album art to the file, but that's not true, as I embedded the album art to the files I wanted several times, to no avail. Furthermore, removing an embedded album art from a file didn't have any effect on those that ARE displaying the icons. So my question is: How does it work? Where does Nautilus (or Ubuntu, I don't know) get the picture from? How do I edit it? Thanks in advance! -Amir

    Read the article

  • Get Social At The Oracle Social Summit, November 14–15, 2012, Wynn Las Vegas

    - by Michael Hylton
    More and more power has shifted to the customer with the advent of social media networks—beyond the direct control of the brand. Customers today have so many resources available to them to share their experiences about brands, both positive and negative—it’s astounding and it can be difficult to sift through. Do you know what your customers are saying about your brand? Join top brand marketers, agency executives, and social development leaders for networking and sharing of best practices with industry peers at the Oracle Social Summit, November 14–15, 2012, at the Wynn in Las Vegas, NV. At the Summit you will learn how: Marketing Leaders are bringing key parts of their enterprise together with Social Relationship Management Social Content & Community Managers implement best practices and share tips-of-the-trade for managing a brand's social presence Social Agency & Marketing Developers stay ahead of new social technologies and development best practices Speakers include David Kirkpatrick, founder and CEO of Techonomy Media and author of The Facebook Effect; Reggie Bradford, Oracle Senior Vice President; Matt Dickman, EVP of Social Business Innovation, Weber Shandwick; Matt Thomson, VP of Business Development & Platform, Klout; Lyndsay Iorio, Social Media & Communications Manager, NBC Sports Group; Teresa Caro, VP Social Marketing, Engauge; and many more.  Click here to learn more and register for this exciting social event!

    Read the article

  • Acer Aspire One 725 - missing graphic card driver?

    - by Melon
    Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

    Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >