Search Results

Search found 8056 results on 323 pages for 'external'.

Page 105/323 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

  • WD Passport Won't Mount

    - by Scott7278
    My WD Passport won't mount. However, it turns on when plugged into my macbook and doesn't make any strange noises. It took a small fall (just a few inches and it was on my couch) and I'm very concerned about physical damage. When I open up disk utility it shows the root 500 GB WD My Passport drive which seems to be OK when I verify it and repair it. However, the "External Hard Drive", the directory underneath the "500 GB WD My Passport drive" is grayed out. When I verify the External Hard Drive it says it needs to be rapaired. When I try and repair it it gives me the following message and does not seem to progress: "Updating boot support partitions for the volume as required." Is there hope for me recovering my data? I stupidly have important data on it that I don't have anywhere else.

    Read the article

  • When exchange receives message, send notification to another address

    - by Rick Kierner
    I have an internal exchange 2010 server that receives no outside email and sends no email outside. I'd like to send a notification email to an outside email when a user receives a message on the internal exchange server. This message would simply say "A Message has been sent to your XYZ Email, go check it" Theoretically, the AD would have an external email address associated with the user's AD Account. I'm hoping that a process could be triggered when an email is received on this exchange server and I could take some type of action to look up the AD account for the recipient, grab the external email address and send a standard email to that user. This would be a global rule for all exchange accounts. The problem is that I don't know where to start. Thanks!

    Read the article

  • FTP server questions

    - by Brad
    I'm currently trying to set up a home FTP server using debian and proftpd and I've run into a problem that has me confused. I have most things set up already, I believe, but I cannot access my ftp server using my external ip. I've forwarded the correct port on my router and I've checked http://www.yougetsignal.com/tools/open-ports/ to be sure that it is, in fact, opened. I've used telnet locally on my server to check that the port accepts connections. I am able to use ftp via LAN. But, I still cannot access anything externally. I'm thinking that there's still some router configuration to be done in order to fix this, such as routing all connections on my ftp port to my server via the internal ip, but I can't find any option on my router to do this. Is this a necessary step? There is an option to use DMZ hosting, but I'd rather avoid it if possible. I can provide additional information as requested, please let me know any information that you think could help at all. Thanks. -Brad PS - I have a Telus Actiontec Modem/Router Update - !! Trying my ftp server out at work, worked! I guess I did set it up correctly after all. What is confusing me, though, is why doesn't the server allow me to connect locally anymore? That seems very weird to me. Also, I don't really understand why I am denied outright if I attempt to connect from the same network using the external address. I'll look into it more when I get home, but thank you guys for your help. Update 2 - I found the problem with not being able to connect locally anymore. I was setting the masquerade address to my external IP and for some reason that was causing it to hang on MLSD when I connected using my LAN address. I've removed the masquerade address and I'm going to check if I need it at work tomorrow. I'll update this page if I find anything.

    Read the article

  • Primary monitor keeps reverting back to the laptop display

    - by Celeritas
    A Macbook Pro running VMware Fusion has a guest operating system of Windows 7. The user often connects an external monitor to the laptop through an HDMI cable. For the display settings "extend the desktop" is selected and I keep setting the primary monitor as the external one but for some annoying reason it keeps changing back. So after Windows starts the taskbar and icons are on the laptop screen which we don't want. I know how to change it but it keeps changing back (and the computer user is non-technical).

    Read the article

  • Create and manage child name servers (glue records) within my domain?

    - by basilmir
    Preface I use a top level domain provider that only allows me to add "normal" third-party name servers (a list where i can add "ns1.hostingcompany.com" type entries... nothing else) AND "child name servers" which i can later attach to my parent account ( ns1.myowndomain.com and an ip address). They do not provide other means of linking up. I want to host my own server and dns, even with just one name server (at first). My setup: Airport Extreme - get's a static ip address from my ISP Mac Mini Server - sits behind the Airport and get's a 10.0.1.2 My problem is that i can't seem to configure DNS correctly. I added a "child nameserver" with my airport's external static ip address at the top level provider, so to my understanding i should have all DNS traffic redirected to my Airport. I've opened port 53 UDP to let the traffic in. Now, what i don't get is this. My Mini Server is sitting on a 10.0.1.2 address and i have setup dns correctly, with an A record to point and resolve my server AND a reverse lookup to that 10.0.1.2. So it's ok for "internal stuff". Here is the clicker... How, when a request comes from the exterior for a reverse lookup, does the server "know" ... well look i have everything in 10.0.1.2 but the guy outside needs something from my real address. I can't begin to describe the MX record bonanza... How do i set this "right"? Do i "need" my Mini Server to sit on the external address directly (i can see how this could be the preferred solution, being close to a "real" server i have in my mind). If not... do i need a PTR record on the 10.0.1.2 server but with the external address in there? My dream: I will extend this "setup" with multiple Mini's in different cities where i work. I want a distributed something (Xgrid comes to mind). PS. Be gentle, i've read 2 books and the subject, and bought both the Lynda Essentials and DNS and Networking to boot, still i'm far from being on top of things.

    Read the article

  • When Exchange receives a message, send notification to another address

    - by Rick Kierner
    I have an internal Exchange 2010 server that receives no outside email and sends no email outside. I'd like to send a notification email to an outside email when a user receives a message on the internal Exchange server. This message would simply say "A Message has been sent to your XYZ Email, go check it" Theoretically, the AD would have an external email address associated with the user's AD account. I'm hoping that a process could be triggered when an email is received on this Exchange server and I could take some type of action to look up the AD account for the recipient, grab the external email address and send a standard email to that user. This would be a global rule for all Exchange accounts. The problem is that I don't know where to start. Thanks!

    Read the article

  • Mac webcam photo application with access to camera settings (resolution, camera selection, color balance, focus)

    - by Pascal T.
    Does anyone know about a webcam photo application (ie an alternative to photo booth) with would allow to change the settings on the camera, such as : Select camera (I.e I want to use an external webcam) Change camera resolution (with photobooth change camera settings (I.e autofocus, aperture, color balance, etc..) I did a lot of research on the internet with no success. I am looking for a very simple app (such as wmcap.exe on Windows) What I tried so far: photo booth: it works with an external camera, however there is no way to change the resolution, or the color/focus settings manycam : a virtual webcam driver. you can add special effects to your camera and transfer those effects to any app, but not change your camera settings... iGlasses : enables you to change the camera settings inside photo booth and other apps. However you cannot control the focus, nor the video resolution macam (did not work on my Mac book Pro) Does anyone know better than me? Note : my only solution now is to launch a virtual machine (with parallels desktop) and take the pictures from there!

    Read the article

  • Laptop display not working unless DVI cable is plugged in

    - by marien
    I have a Lenovo ThinkPad T420 with an i5 processor and integrated graphics. I dropped the laptop and now the screen is not working. I replaced the screen and it is still not working. It shows the BIOS and then at Windows login the screen gets all static looking. But if I plug in a DVI-to-HDMI cable the laptop starts and works fine. Even the external display works and the laptop display works too. As soon as I unplug the cable the screen crashes and is all static. I cannot figure out the problem. The video works because the external screen still works. How can I fix this?

    Read the article

  • Two virtual host one with Domain name one with internal ip#?

    - by Abhishek
    Is it possible to have two virtual host configurations for the same server - one with internal ip address and one with domain name? Something like <VirtualHost {{internal-ipaddress}}:80> ....... </VirtualHost> <VirtualHost {{domain-name}}:80> ....... </VirtualHost> Note that the internal IP address and the domain name belong to the same server or same server instance. I am asking this to restrict some URLs for external users, redirect to https all external access and allow everything for internal users(without https)..

    Read the article

  • Running ubuntu 10.04 without a laptop's primary display

    - by riteshmnayak
    I have an IBM thinkpad(R50e) whose display is broken. I would still like to use the laptop by connecting it to an external monitor and keyboard/mouse. This is what I did: Removed the hard disk from the broken IBM Put the hard disk in the working IBM and installed 10.04 on it. It booted fine and I installed many packages and stuff. I put the hard disk back into the broken display IBM thinking I could use it by connecting it to an external monitor that I own. Well, it turns out that while booting, the display shows up but because the display shifts from the VGA display to the primary display mid-boot, the laptop does not boot. Is there a way in which I can force the laptop to not use its primary display while booting. I looked at Randr and also grub.conf settings but nothing seemed to work. Please help!

    Read the article

  • Generic Windows 98 USB Drive drivers?

    - by Electrons_Ahoy
    I've got an old Win98 machine that I'd like to pull some data off of. (Tens of gigs of data, actually.) The machine still runs fine, but due to the age, it doesn't have a cd burner, and the pre-NT networking won't connect to SMB shares without a fair amount of wrenching on the registry that I don't really want to do. What I really want to do is plug in an external USB hard drive and copy the files. But - Win98 didn't ship with generic USB drive drivers, and external drives don't ship with them these days. Can anyone point me at a reputable generic driver I can install?

    Read the article

  • Can I set Windows default second-monitor behaviour to "Extend these displays"?

    - by MT_Head
    I travel to multiple offices (and multiple desks in those offices), and whenever possible I plug an external monitor into my laptop. Whenever I plug in a monitor I haven't used before, Windows defaults to "Duplicate these displays" - which messes up the arrangement of icons on my desktop if the external monitor is a different shape from my laptop's monitor. I then select "Extend these displays", and my laptop screen returns to its original shape - but my icons don't go back to their original arrangement. Grrrrr. Fast-forward a few days or weeks; I've got my icons arranged so I can find stuff again - then I go to a new office and it starts all over again. I'm tired of this. Is it possible to make "Extend these displays" the default behavior? I'm using Windows 8 x64 Home Premium, but I had the same complaint under Windows 7 x64 Ultimate. (Prior to that, I hadn't discovered the joy of dual displays. Ah, the time I wasted...)

    Read the article

  • Can I move my Picasa data from one machine to another?

    - by Stuart Hemming
    I have lots of photos stored on an external hard disk. I have Picasa installed on my Windows 7 laptop and have spent a lot of time cataloging the collection, put names to faces and the like. I now have a new machine and I want all the hard work I did on my laptop to be available when I plug my external HD in to the new machine. Is there a magic spell I need to cast to make this happen? Or is all the data I need stored with the photos?

    Read the article

  • In VirtualBox, how can I access host localhost from guest (Visual Studio Dev Server from IE7 testing VM)?

    - by Seth
    Host OS is Win7 running MyApp in the Visual Studio Development Server, bound to localhost:51227, VM is VirtualBox configured with NAT. Guest OS is Win XP with IE7 installed. My goal is to debug MyApp (running on host) from within IE7 (running on guest). Visual Studio Development server only binds to the loopback network device (i.e. localhost). It does not bind to the external IP address of my host. I've tried access 10.0.2.2:51227 from IE7 on the guest (and confirmed that 10.0.2.2 is the gateway address using ipconfig), but it appears that 10.0.2.2 binds to the external IP of the Host, NOT the loopback IP (localhost), so this does not work. Any suggestions?

    Read the article

  • 3 Monitors on a Notebook

    - by Rihan Meij
    I would like to use 3 screens on my Dell Inspiron 1720 So On the laptop built in screen have that as one, and then have 2 more screens. The catch is, that I want to play racing games with this set-up. So that my main screen is the focus area (the front window if you will) and the other 2 screens will be used for peripheral vision, on the side. The software that I use (LFS.net) does support multiple screens. However the notebook can have the main screen on, and another external screen. So I would need to split this "second" monitor output, to 2 screens, the one to the left of the main monitor, and the other one to the right. Is this possible? Is there perhaps a external card / docking station solution that could help with this? Any advice or ideas is greatly appreciated. Best Regards Rihan

    Read the article

  • What's the best multiple monitor setup I can buy for $500 and a macbook?

    - by kevinburke
    I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

    Read the article

  • Linux - Network Sharing a local NTFS usb drive

    - by Jonathan Rioux
    I have an external hard drive formated in NTFS which I would like to be able to access by the network. I want to make a network share out of it. I also have a Debian machine running in my house and I then got an idea. I want to plug in my external hard drive (usb) into my Debian machine, and make a windows share with it, maybe with Samba, so I will be able to access it from my Windows 7 laptop and see it as a network share. Additionally, how can I restrict specific folders of that network share, and allow only specific folders to specific users? For instance, I would like to give my girlfriend access to a folder of her name so she can put her files and so she wont be able to see the stuff in my folder...

    Read the article

  • Notebook display not working properly

    - by jfcfar
    I have an old Acer TM4001 notebook. If the laptop is powered-off, with the lid closed, when I power it on, it generally works. Then, without touching anything, if I reboot the computer the internal display wil not work anymore. To make it working again I need to shut down the pc, close and reopen the lid and then turn it on. If I close and reopen the lid if it is not working after power the pc on, it won't work. When the screen is working, closing and opening it has no effect (the data cable seems ok). The external monitor always works as expected: If the internal display is not detected, the external will be the main (and only) display. This is not OS-related. When the screen is not working I cannot see the POST. What could be the cause for this?

    Read the article

  • Windows 8: Multiple monitors with varying DPI? [closed]

    - by Sid
    Possible Duplicate: Dual monitors on Windows - How do I set a different DPI or text size on each monitor? I'm running Windows 8 on my Macbook Pro Retina (220dpi) which has an external 24" monitor (~96 dpi). In Mac OS 10.8.2, the display settings seem ok and I can actually use both displays without usability issues. I don't know what scaling settings etc it uses but it looks fine. On Windows 8, however when I boost the DPI settings to take advantage of the retina display, it blows up the display on the external monitor - text is giant sized. How can I tell Windows 8 to use the real DPI settings of each monitor? NOTE: I'm not asking for Windows 7.

    Read the article

  • Windows backups to VM Esxi

    - by Martyn
    I'm very new to ESXi, so apologies if this is a silly question. I have ESXi 5.1 running running on HP Proliant Microserver with internal LUNs RAIDed with HP P410 Smart Array card. I have 2 Windows Server 2012 VMs running as Domain controllers. These are being backed-up up with GhettoVCB to a dedicated datastore hosted on LUNs on a eSata external device. I have several Windows 8 & 7 PC's connected to this domain. I want to back up these Windows PCs, via the built in backup software, ideally to the external eSata device as well. What do I need to do to have the Windows PC's see the datastore? I assume I could create a VM for FreeNas or something, or share out the datastore via one of the Windows Server 2012 VMs. Both those options seem a little bit of an over kill?

    Read the article

  • Corrupted files, hard drive test?

    - by all-R
    Hi guys, I'm currently on a macbook with a 1TB external hard drive connected trough a USB hub wich is connected on my macbook. The problem is, my disk, wich is partitioned in 2 (one HFS+ and one NTFS) keeps getting corrupted, recently it was my HFS+ partition, I could not repair it using the Apple's Disk utility, but was able to backup my files. Is it synonym that my hard drive is failing? Is it because of my USB hub? I also keep all my iTunes library on my external HD (HFS+ partition), and did a lot of transfer lately, adding files, removing etc. the last time, my partition got corrupted after a lot of deleted items. If anybody has an idea of what to check first, what could cause the problem, I would appreciate it :) Thanks!

    Read the article

  • Use 2 wireless adapters to connect to 2 WIFI networks (local and internet) simultaneously?

    - by Mouad
    On my HP Compaq 6710b there's an internal WIFI network adapter. Attached to the same laptop there's also an external USB Alfa WIFI adapter. I live near campus and can pick it's WIFI signal. The problem is that when I am connected to the Internet Wifi using the internal adapter, and then connect to the home (non-internet) Wifi network's router, I lose the connection to the internet (it stays connected, but there's no actual connection). So how can I use the two adapters to connect to both networks successfully ? The router is Belkin N150 Enhanced Router Model F6D4230-4 V1 The external adapter is: ALFA AWUS 036NHR

    Read the article

  • Iptables port mapping from two PCs to one

    - by Anton
    We have 3 PCs, two of it are connected to internet (both of it have 2 NIC) PC1: eth0 - 1.0.0.1 (external IP) eth1 - 172.16.0.1 (internal IP) PC2: eth0 - 1.0.0.2 (external IP) eth1 - 172.16.0.2 (internal IP) PC3: eth0 - 172.16.0.3 (internal IP) Now we want to map port 80 from PC1 and PC2 to PC3. But there is the problem: iptables port forwarding works well from PC1 or PC2, but only in case if PC3 have PC1 or PC2 as gateway. So, question is: can we have port mapping from both PC1 and PC2 regardless of gateway settings on PC3? Thank you in advance.

    Read the article

  • backing up ntfs disk using rsync on ubuntu

    - by user70366
    For a long time I was using windows. I have a separate drive I use to keep copies of my media files, photos etc. on, which I periodically backup to an external drive. In Windows I used SyncToy to do this. After my Windows stopped booting, I decided to switch to Linux (Ubuntu 10.10). That seems to be going fine, but now I want to backup my drive to the external drive like before. Mostly the two drives will be already the same with maybe about 10GB of extra files added. So I try to use rsync to synchronise the two drives like this: rsync --dry-run -rvlt --modify-window=1 /media/Antonio1TB/Backup /media/FREECOM\ HDD/Backup The problem is the dry run indicates that every file on the drive will be copied. Not just the files I have recently added. What is the correct command to synch two NTFS drives under Ubuntu so that files that already exist don't get copied again? Thanks.

    Read the article

  • Trouble loading an ISO

    - by crocyson
    I've created a boot disk and ISO image with paragon. I boot up the Virtual pc with the disk in and I get to my recovery page. When I am supposed to select an ISO image? My Virtual PC doesn't acknowledge any of my physical hard drives on my host PC. I've also tried copy/paste the files into my datastore and they do not show up. I've tried the option during the set up to start with the ISO but again I am not able to browse to my external hard drive that I have stored the ISO on. VMWare will acknowledge it and say that it is connected but I can't browse to it. Am I doing something wrong? I created the back up disk and ISO image on the external with paragon.

    Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >