Search Results

Search found 4006 results on 161 pages for 'profile'.

Page 105/161 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• It could be worse....

  - by Darryl Gove

  As "guest" pointed out, in my file I/O test I didn't open the file with O_SYNC, so in fact the time was spent in OS code rather than in disk I/O. It's a straightforward change to add O_SYNC to the open() call, but it's also useful to reduce the iteration count - since the cost per write is much higher: ... #define SIZE 1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT|O_SYNC,S_IWGRP|S_IWOTH|S_IWUSR); ... Running this gave the following results: Time per iteration 0.000065606310 MB/s Time per iteration 2.709711563906 MB/s Time per iteration 0.178590114758 MB/s Yup, disk I/O is way slower than the original I/O calls. However, it's not a very fair comparison since disks get written in large blocks of data and we're deliberately sending a single byte. A fairer result would be to look at the I/O operations per second; which is about 65 - pretty much what I'd expect for this system. It's also interesting to examine at the profiles for the two cases. When the write() was trapping into the OS the profile indicated that all the time was being spent in system. When the data was being written to disk, the time got attributed to sleep. This gives us an indication how to interpret profiles from apps doing I/O. It's the sleep time that indicates disk activity.

  Read the article

• CodePlex Daily Summary for Sunday, October 20, 2013

  CodePlex Daily Summary for Sunday, October 20, 2013Popular ReleasesKerbalAlarmClock: v2.6.1.0 Release: Version 2.6.1.0 Recompiled it for 0.21 Added Crew Alarms (track Kerbal rather than Vessel) Added Distance Target Alarms - distance from target vessel or altitude above planet Added Launch Rendezvous Alarm (under Ascending/Descending Node for Landed craft) - MechJeb2 code - thanks r4m0n Allow restoration of Nodes that you have passed (useful for interplanetary burns) Added missing Dres Transfer Model data - thanks Voneiden Added view only version of Alarm clock to both Space Center...MSBuild Extension Pack: October 2013: Release Blog Post The MSBuild Extension Pack October 2013 release provides a collection of over 480 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...VG-Ripper & PG-Ripper: VG-Ripper 2.9.49: changes NEW: Added Support for "ImageTeam.org links NEW: Added Support for "ImgNext.com" links NEW: Added Support for "HostUrImage.com" links NEW: Added Support for "3XVintage.com" linksMedia Companion: Media Companion MC3.583b: As before release but fixed for no movie poster sourcesNew* Both - Added 'An' as option to ignore in title * Movie - Renaming - added %Z - Sorttitle to Legend * Movie - Renaming - added %O - Audio Channels to Legend * Movie - Remove a poster source from priority list. Reset List back to defaults. * Made Media Companion truly portable application. Fixed* Movie - browse for Poster Or Fanart, allows for jpg, tbn, png and bmp images * Movie - Alt Fanart Browser - Url or Browse window now fully...MoreTerra (Terraria World Viewer): MoreTerra 1.11.3.1: Release 1.11.3.1 ================ = New Features = ================ Added markers for Copper Cache, Silver Cache and the Enchanted Sword. ============= = Bug Fixes = ============= Use Official Colors now no longer tries to change the Draw Wires option instead. World reading was breaking for people with a stock 1.2 Terraria version. Changed world name reading so it does not crash the program if you load MoreTerra while Terraria is saving the world. =================== = Feature Removal = =...patterns & practices - Windows Azure Guidance: Cloud Design Patterns: 1st drop of Cloud Design Patterns project. It contains 14 patterns with 6 related guidance.Player Framework by Microsoft: Player Framework for Windows and WP (v1.3): Includes all changes in v1.3 beta 1 and v1.3 beta 2 Support for Windows 8.1 RTM and VS2013 RTM Xaml: New property: AutoLoadPluginTypes to help control which stock plugins are loaded by default (requires AutoLoadPlugins = true). Support for SystemMediaTransportControls on Windows 8.1 JS: Support for visual markers in the timeline. JS: Support for markers collection and markerreached event. JS: New ChaptersPlugin to automatically populate timeline with chapter tracks. JS: Audio an...Json.NET: Json.NET 5.0 Release 8: Fix - Fixed not writing string quotes when QuoteName is falsePowerShell Community Extensions: 3.1 Production: PowerShell Community Extensions 3.1 Release NotesOct 17, 2013 This version of PSCX supports Windows PowerShell 3.0 and 4.0 See the ReleaseNotes.txt download above for more information.SQL Power Doc: Version 1.0.2.1: Misc. bug fixes Added logic to resolve members of a Windows Group server login Added columns to Excel workbooks to show definitions for server permissions, server roles, database permissions, and database rolesSocial Network Importer for NodeXL: SocialNetImporter(v.1.9): This new version includes: - Download latest status update and use it as vertex tooltip - Limit the timelines to parse to me, my friends or both - Fixed some reported bugs about the fan page and group importer - Fixed the login bug reported latelyTerrariViewer: TerrariViewer v7.1 [Terraria Inventory Editor]: You can now backspace in number fields Items added in 1.2.0.3 no longer corrupt player files Buff durations capped at 9999999 Item stacks capped at 9999999 Version info added Prefix IDs corrected Shoe and Eye color box are now properly clickable Moved Bank and Safe into their own tab Users will now be notified of new updatesPython Tools for Visual Studio: 2.0: PTVS 2.0 We’re pleased to announce the release of Python Tools for Visual Studio 2.0 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, IPython, and cross platform and cross language debugging support. QUICK VIDEO OVERVIEW For a quick overview of the general IDE experience, please watch this v...CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.2: Solved scrolling problem after DocumentFormatting Implemented "format as you type" --- To avoid the DLLs getting locked by OS use MSI file for the installation.LINQ to Twitter: LINQ to Twitter v2.1.09: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.Sandcastle Help File Builder: SHFB v1.9.8.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...C++ REST SDK (codename "Casablanca"): C++ REST SDK 1.3.0: This release fixes multiple customer reported issues as well as the following: Full support for Dev12 binaries and project files Full support for Windows XP New sample highlighting the Client and Server APIs : BlackJack Expose underlying native handle to set custom options on http_client Improvements to Listener Library Note: Dev10 binaries have been dropped as of this release, however the Dev10 project files are still available in the Source CodeAD ACL Scanner: 1.3.2: Minor bug fixed: Powershell 4.0 will report: Select—Object: Parameter cannot be processed because the parameter name p is ambiguous.Fast YouTube Downloader: YouTube Downloader 2.2.0: YouTube Downloader 2.2.0VidCoder: 1.5.8 Beta: Added hardware acceleration options: Bicubic OpenCL scaling algorithm, QSV decoding/encoding and DXVA decoding. Updated HandBrake core to SVN 5834. Updated VidCoder setup icon. Fixed crash when choosing the mp4v2 container on x86 and opening on x64. Warning: the hardware acceleration features require specific hardware or file types to work correctly: QSV: Need an Intel processor that supports Quick Sync Video encoding, with a monitor hooked up to the Intel HD Graphics output and the lat...New ProjectsAdd2Nums: Add2Nums is a VB.NET project that takes 2 numbers, computes their sum and outputs the result. Developed by Justin Mifsud as part of Assignment 1 (7COM0152)Athir: GPAO El_AthirCS-MIC - C# Math Input Control: CS-MIC is a .NET library written in C# designed to give developers easy access to expression parsing.HLS Video Player: An open source over-the-network video player for HLS (Hinkle Light Show)Project Stark: This is a secret project available only to the project owners for the time being.Run ++: Run Plus Plus is a tool that enables you to custom the commands in the "Run" dialog.SimpleAddition: This is a simple ASP.NET in VB.NET page that allows users to enter 2 numbers, and display their sum. SWE 681 Go Fish: Project

  Read the article

• Ubuntu 12.04LTS stuck at login mouse and keyboard not responding

  - by user169954

  I have Ubuntu 12.04LTS installed on a dual-booted machine (i5 dual core 8G ram) and it's been working fine, but today for some reason when I logged out and tried to log back in it is stuck at the login page, i.e. the mouse and the keyboard are not responding. The mouse is stuck at the top left corner of my screen, and I can do nothing but to turn the machine off. (I have been using logitech wireless mouse and keyboard.) I can not access the virtual console (Alt-F1 or Cntrl-Alt-F1) either! Here is what I have tried so far: Verified it is not a H/W problem since the mouse and keyboard work fine with windows7 Booted with ubuntu installation dvd and ran trial mode and mouse and keyboard worked fine. Tried bypassing the login screen by booting into recovery mode and editing tty1.conf, but to no avail. I moved .Xauthority .profile and .bashrc from my $HOME to another location so my login would proceed completely by system defaults. But this did not help From recovery mode commandline used to dpkg-reconfigure to switch between gdm and lightgdm. This did not help either. By the way, when in recovery mode as root from command line I mount the filesystem, all apps work fine. Python is Ok, octave is ok, vi is ok etc. I have a feeling if I could only bypass the login screen, and automatically get into the desktop, I will be ok. But I haven't been able to accomplish this either. I desperately need help please. Thank you in advance. Update: So I tried to switch to lightdm by dpkg-configure lightdm. This at least brings me up to the classical linux commandline login prompt but without a gui. Should I install startx? Should I install ubuntu-desktop?

  Read the article

• Joomla Secondary Users

  - by Gaz_Edge

  Background I have a joomla based application. My customers sign up and they register as a user on the site. My customers (primary customers) then have their own space on the site that they can then setup their own customers (secondary customer). Question/Problem The problem I am having is that I need to tag each secondary customer to a primary customer. I thought about just creating a new component and having a separate table that includes all the secondary customers. The problem is that I then lose out on all the authentication, session handling and login/logout that the core joomla _users component offers. I then thought about just having all the users in the core _users table and add the primary customer associated with each secondary customer to a field in a profile plugin. This would work for the most part, but this means that primary customers cannot create a secondary customer with a user name that already exists in the _users table. I didn't think this would be an issue, but several of my primary customers (currently only test users) have been confused by the site telling them a username is not available, since they can only see the names of their own secondary customers. Any ideas on some architectural changes I could make to solve this?

  Read the article

• ORAchk version 2.2.5 is now available for download

  - by Gerry Haskins

  Those awfully nice ORAchk folks have asked me to let you know about their latest release... ORAchk version 2.2.5 is now available for download, new features in 2.2.5: Running checks for multiple databases in parallel Ability to schedule multiple automated runs via ORAchk daemon New "scratch area" for ORAchk temporary files moved from /tmp to a configurable $HOME directory location System health score calculation now ignores skipped checks Checks the health of pluggable databases using OS authentication New report section to report top 10 time consuming checks to be used for optimizing runtime in the future More readable report output for clusterwide checks Includes over 50 new Health Checks for the Oracle Stack Provides a single dashboard to view collections across your entire enterprise using the Collection Manager, now pre-bundled Expands coverage of pre and post upgrade checks to include standalone databases, with new profile options to run only these checks Expands to additional product areas in E-Business Suite of Workflow & Oracle Purchasing and in Enterprise Manager Cloud Control ORAchk has replaced the popular RACcheck tool, extending the coverage based on prioritization of top issues reported by users, to proactively scan for known problems within the area of: Oracle Database Standalone Database Grid Infrastructure & RAC Maximum Availability Architecture (MAA) Validation Upgrade Readiness Validation Golden Gate Enterprise Manager Cloud Control Repository E-Business Suite Oracle Payables (R12 only) Oracle Workflow Oracle Purchasing (R12 only) Oracle Sun Systems Oracle Solaris ORAchk features: Proactively scans for the most impactful problems across the various layers of your stack Streamlines how to investigate and analyze which known issues present a risk to you Executes lightweight checks in your environment, providing immediate results with no configuration data sent to Oracle Local reporting capability showing specific problems and their resolutions Ability to configure email notifications when problems are detected Provides a single dashboard to view collections across your entire enterprise using the Collection Manager ORAchk will expand in the future with high impact checks in existing and additional product areas. If you have particular checks or product areas you would like to see covered, please post suggestions in the ORAchk subspace in My Oracle Support Community. For more details about ORAchk see Document 1268927.2

  Read the article

• Oracle Linux Partner Pavilion Spotlight - Part IV

  - by Ted Davis

  Welcome to the final Oracle Linux Partner Pavilion Spotlight Part IV.  Two days left till the Big Show. You are gearing up. We are gearing up. You can feel the excitement.  We can feel the excitement. This. Will. Be. The. Best. Show. EVER. See you at the Partner Pavilion (Moscone south # 1033) at Oracle OpenWorld. - Oracle Linux / Oracle VM Team HP and Oracle are pleased to announce another Oracle Validated Configuration based on the ProLiant DL980 server. Many choose to deploy Oracle workloads on the ProLiant DL980 based on the cost/performance ratio they achieve running Oracle Linux Unbreakable Enterprise Kernel. You can be confident that Oracle Validated Configurations based on ProLiant servers will help you achieve your most demanding performance goals. QLogic The QLogic-Oracle partnership spans over 20 years resulting in the most comprehensive line of Oracle Linux I/O adapter technology. Interface options include Ethernet, Fibre-Channel, and FCoE. Host side connectivity is offered in both low profile PCIe and Express Module PCIe form factors. QLogic software drives are jointly qualified and “in-box” with Oracle Linux 5.x, 6,x and Oracle VM enabling simplified installation and management while simultaneously taking risk out of the solution. Bringing innovations such as NPIV, T10-PI, and intelligent caching adapter technology to the Oracle Linux environment further strengthens the QLogic advantage. A big thank you to all of our Oracle Linux Partner Pavilion participants. We - they- look forward to meeting you next week at Oracle OpenWorld. If you've missed our three previous Partner Spotlight's - here are the links: Part I, Part II, Part III. 

  Read the article

• Visual Studio 2010 Service Pack 1 Released

  - by krislankford

  The VS 2010 SP 1 release was simultaneous to the release of TFS 2010 SP1 and includes support for the Project Server Integration Feature Pack and updates to .NET Framework 4.0. The complete Visual Studio SP1 list including Test and Lab Manager: http://support.microsoft.com/kb/983509 The release addresses some of the most requested features from customers of Visual Studio 2010 like better help support IntelliTrace support for 64bit and SharePoint Silverlight 4 Tools in the box unit testing support on .NET 3.5 a new performance wizard for Silverlight Another major addition is the announcement of Unlimited Load Testing for Visual Studio 2010 Ultimate with MSDN Subscribers! The benefits of Visual Studio 2010 Load Test Feature Pack and useful links: Improved Overall Software Quality through Early Lifecycle Performance Testing: Lets you stress test your application early and throughout its development lifecycle with realistically modeled simulated load. By integrating performance validations early into your applications, you can ensure that your solution copes with real-world demands and behaves in a predictable manner, effectively increasing overall software quality. Higher Productivity and Reduced TCO with the Ability to Scale without Incremental Costs: Development teams no longer have to purchase Visual Studio Load Test Virtual User Pack 2010. Download the Visual Studio 2010 Load Test Feature Pack Deployment Guide Get started with stress and performance testing with Visual Studio 2010 Ultimate: Quality Solutions Best Practice: Enabling Performance and Stress Testing throughout the Application Lifecycle Hands-On-Lab: Introduction to Load Testing with ASP.NET Profile in Visual Studio 2010 How-Do-I videos: Use ASP.NET Profiler in Load Tests Use Network Emulation in Load Tests VHD/VPC walkthrough: Getting Started with Load and Performance Testing Best Practice guidance: Visual Studio Performance Testing Quick Reference Guide

  Read the article

• How should I structure my database to gain maximum efficiently in this scenario?

  - by Bob Jansen

  I'm developing a PHP script that analyzes the web traffic of my clients websites. By placing a link to a javascript on the clients website (think of Google Analyses), my script harvests information like: the visitors IP address, reference link, current page link, user agent, etc. Now my clients can view these statistics via a control panel that I have build. These clients can also adjust profile settings, set firewall rules, create support tickets and pay invoices. Currently all the the traffic is stored in one table. You can imagine that this tabel would become very large as some my clients receive thousands of pageviews per day. Furthermore, all the traffic data of each client would be stored in the same table, creating a mess. This is the same for the firewall rules currently, and the invoice and support system. I'm looking for way to structure my database in a more organized way to hold large amounts of data of multiple users. This is the first project that I'm developing that deals with so much data, and would like to hear suggestions and tips. I was thinking of using multiple databases to structure the data. The main database will store users data (email,pass,id,etc) admin/website settings. Than each client will have an unique database labeled prefix_userid, which carry tables holding their traffic, invoice, and support ticket data. Would this be a solution, and would it slow down or speed up overall performances (that is spreading the data over muliple databases). I have a solid VPS, but would like to safe and be as effient as possible.

  Read the article

• OPN Solutions Catalog Goes Mobile

  - by Meghan Fritz-Oracle

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Good news for our partners on this sunny Tuesday! Oracle PartnerNetwork is pleased to announce the launch of a mobile-ready OPN Solutions Catalog. Features include: A fluid search and browse experience regardless of device (phone, tablet, or desktop) Streamlined design and reorganized search facets, making it easier for customers to search and browse for partner profiles and their solutions The OPN Solutions Catalog is a free marketing tool for all active Oracle PartnerNetwork members. If you are an OPN partner… take advantage of it! To learn more about the new catalog, watch the Solutions Catalog Training which includes best practices and a demo on how to update your profile. Spend a few minutes with our experts to learn how you can expand your market reach and showcase your offerings to our customers, partners, and Oracle employees worldwide.Questions? Visit the Solutions Catalog Resource page or contact the Partner Business Center.

  Read the article

• Getting the PC speaker to beep

  - by broiyan

  There has been much written on getting the beep sound from Ubuntu releases over the years. Example: fixing the beep My needs are slightly different in that I do not want to ensure sound card beeps are functioning. Instead, I want PC speaker beeps, the kind produced by the original built-in speaker because I believe they will produce less CPU load. I have confirmed that my computer has the PC speaker by unplugging the external speakers and shutting down Ubuntu. At some point in the shutdown and restart process a beep is heard even though the external speakers have no power. I have tried the following: In /etc/modprobe.d/blacklist.conf, turn these lines into comments: #blacklist snd_pcsp #blacklist pcspkr In .bashrc /usr/bin/xset b on /usr/bin/xset b 100 Enable in the gnome terminal: Edit Profile Prefs General Terminal Bell Ensure no "mute" selections in: System Prefs Sound various tabs (uncheck them all). Select "Enable window and button sounds" in: System Prefs Sound Sound Effects In gconf-editor desktop gnome sound, select the three sound check boxes. In gconf-editor apps metacity general select the audible bell check box. Still I get no PC speaker beeps when I send code 7 to the console via my Java program or use echo -e '\a' on the bash command line. What else should I try? Update Since my goal is to minimize load on the CPU, here is a comparison of elapsed times. Each test is for 100,000 iterations. Each variant was performed three times so three results are presented for each. printwriter.format("%c", 7); // 1.3 seconds, 1.5 seconds, 1.5 seconds Toolkit.getDefaultToolkit().beep(); // 0.8 seconds, 0.3 seconds, 0.5 seconds try { Runtime.getRuntime().exec("beep"); } catch (IOException e) { } // 10.3 seconds, 16.3 seconds, 11.4 seconds These runs were done inside Eclipse so multiply by some value less than 1 for standalone execution. Unfortunately, Toolkit's beep is silent on my computer and so is code 7. The beep utility works but has the most cost.

  Read the article

• ATI Radeon 5800 series dual monitor unity not 3D accelerated

  - by Victor S

  When I had a single monitor setup, without Xinerama, with my current setup of Ubuntu 11.10, ATI 5800 series card, Unity showed transparencies, shadows, etc. (although graphics was reported as 'Standard' in the control/settings panel). Having switched to a dual monitor setup, dell 24" UltraSharp and a smaller Acer monitor, Unity shows only as 2d, even though I'm not loggin in to that display manager. WebGL performance is very sluggish, I'm getting the impression that the processor is doing all the work and the card isn't even accessible even though the drivers are installed (from the ubuntu repository, I did not compile custom drivers). Any tips on how to enable full 3D accelerationn and video card support. Here is my xorg.conf file: Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-DFP4" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1200" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-0" Device "amdcccle-Device[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[1]-1" Device "amdcccle-Device[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[1]-0" 0 0 Screen "amdcccle-Screen[1]-1" 1920 0 EndSection Section "Device" Identifier "amdcccle-Device[1]-0" Driver "fglrx" Option "Monitor-DFP4" "0-DFP4" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "amdcccle-Device[1]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:1:0:0" Screen 1 EndSection Section "ServerFlags" Option "Xinerama" "on" EndSection More info: fglrxinfo display: :0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 5800 Series OpenGL version string: 4.1.11005 Compatibility Profile Context

  Read the article

• How to help FGLRX detect a device

  - by user113416

  I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

  Read the article

• How can I disable recent documents in Unity?

  - by detly

  How do I disable the tracking and display of recently opened files (and whatever else is remembered) in a default installation of Ubuntu 11.10? (Note that this is not a duplicate of How can I keep recent files from appearing in Unity?, since that question and its answers are concerned with temporary and specific filtering. I want to disable it completely for a single user account.) Okay, to deflect the inevitable and expand on my motivation... While trawling the usual forums and Google results for a solution, it (unsurprisingly) seems that the near-universal use cases for this request are either browsing porn or Warhammer research. And the obvious solution to this is to create another user account to contain all evidence. However, this is not why I'm asking, and I don't say that to get all high and mighty about it, it's because this answer won't help. (Even though I really don't have any interest in Warhammer, and I have no idea how that paint pot and brush ended up in my drawer, no that's not glue on my thumb, etc.) My actual use case is that I use my personal laptop for presentations in different circles of my life. I have a user account set up with all the settings I like for presentations (shortcuts, small launcher, default associations, etc). But I don't want an accidental keystroke (or the find dialog) to display other recent presentations I've given, or the files I used in composing the presentation, or whatever. I also don't want to have to recreate this profile for every single presentation I might give. I just want a nice little isolated, memoryless, clean corner of my notebook for public display.

  Read the article

• Thunderbird keeps crashing Ubuntu 12.04 64 bit

  - by maurizio ribera d'alcala'

  I have been using Thunderbird for years under different versions of Ubuntu, including 12.04 since its release. From a couple of days it keeps crashing after a few seconds after start. I tried to reinstall it creating a new profile and copying the old mail, file by file. After one day of normal functioning it started again to crash. Mozilla is receiving the crash reports. Following is the content of the last one: Add-ons: [email protected]:15.0,[email protected]:0.3.11,[email protected]:0.9.3,[email protected]:3.4.1,[email protected]:15.0,[email protected]:0.5.1,{b4447f60-db9c-11da-a94d-0800200c9a66}:0.9.1,{972ce4c6-7e08-4474-a285-3208198ce6fd}:15.0 BuildID: 20120827103657 CrashTime: 1347200254 EMCheckCompatibility: true Email: [email protected] FramePoisonBase: 7ffffffff0dea000 FramePoisonSize: 4096 InstallTime: 1346431480 Notes: OpenGL: Tungsten Graphics, Inc -- Mesa DRI Intel(R) Sandybridge Mobile -- 3.0 Mesa 8.0.2 -- texture_from_pixmap ProductID: {3550f703-e582-4d05-9a08-453d09bdfdc6} ProductName: Thunderbird ReleaseChannel: release SecondsSinceLastCrash: 1109 StartupTime: 1347200242 Theme: classic/1.0 Throttleable: 1 Vendor: Version: 15.0 I started Thunderbird in safe mode and tested all the add-ons. Apparently is the 'Unity Launcher Integration' that creates the problem. I say apparently because I want two wait for two-three days to be sure TB returns to its regular functioning. Is this a bug? can it be solved

  Read the article

• Product Support News for Oracle Solaris, Systems, and Storage

  - by user12244613

  Hi System Support Customers, April Newsletter is now available The April, 2012 Newsletter for Oracle Solaris, Systems, and Storage is now available via document 1363390.1 *Requires a My Oracle Support account to access. Please take a few minutes to read the newsletter. The newsletter is the primary method of communication about what we in support would like you to be aware of. If you are not receiving the newsletter, it could be due to: (a) Your Oracle profile does not have the allow Oracle Communication selected (on oracle.com Sign In, or if logged in select "Account" and under your Job Role, check you have selected this box : [ ] Yes, send me e-mails in Oracle Products.... (b) you have not logged a service request during the last 12 months. Oracle is working to improve the distribution process and changes are coming and once they are ready I will write more about that. But today if you don't automatically receive the newsletter all you can do is save it as a favorite within My Oracle Support and come back on the 2nd of each month to check out the changes. This month I am really interested to find out from you is the Newsletter providing you the type of items that you are interested in. To gather some data on that, I have a small 2minute survey running on the newsletter or you can access it [ here ] Finally, if you think I am missing a topic in the Newsletter, let me know by taking the survey or suggesting a topic via this blog. Get Proactive Don't forget about being Proactive. The latest updates for Systems and Solaris pages in the Get Proactive area are now available. Check out document 432.1 and learn what proactive features are available for Systems and Solaris.

  Read the article

• Find Thousands of Oracle Jobs on oDesk

  - by Brandye Barrington

  We are happy to announce we have teamed up with oDesk, the world’s largest and fastest-growing online workplace, to bring thousands of job opportunities to the Oracle Certified community.  On oDesk, skilled independent professionals can tap into global demand for their skills by accessing hundreds of thousands of job opportunities around the world—more than 444,000 jobs were posted on oDesk in Q2 2012 alone.  And with the freedom to work whenever and wherever they like, on the projects they choose and at the rate they set, oDesk contractors are building their online reputations and taking control of their careers—oDesk data shows that contractors increase their rates by an average of 190% over three years. And with oDesk’s new Oracle Certified Group, contractors can set themselves apart by showcasing an Oracle Certified badge on their profile, giving them a competitive advantage when they apply to the thousands of open Oracle jobs on oDesk.  oDesk is free to join—as is the Oracle Certified Group—and guarantees payment for hourly work. With more than 480,000 businesses from around the world registered on the platform, professionals have a wide range of jobs to choose from, including those that require MySQL, Java, and many other types of Oracle skills. Learn more about Oracle job opportunities and join the Certified Group on oDesk here.

  Read the article

• Speed up ADF Mobile Deployment to Android with Keystore

  - by Shay Shmeltzer

  As you might have noticed from my latest ADF Mobile entries, I'm doing most of my ADF Mobile development on a windows machine and testing on an Android device. Unfortunately the Android/windows experience is not as fast as the iOS/Mac one. However, there is one thing I learned today that can make this a bit less painful in terms of the speed to deploy and test your application - and this is to use the "Release" mode when deploying your application instead of the "Debug" mode. To do this you'll first need to define a keystore, but as Joe from our Mobile team showed me today, this is quite easy. Here are the steps: Open a command line in your JDK bin directory (I just used the JDK that comes with the JDeveloper install). Issue the following command: keytool –genkey –v –keystore <Keystore Name>.keystore –alias <Alias Name> -keyalg RSA –keysize 2048 –validity 10000 Both keystore name and alias names are strings that you decide on. The keytool utility will then prompt you with various questions that you'll need to answer. Once this is done, the next step is to configure your JDeveloper preferences->ADF Mobile to add this keystore there under the release tab:  Then for your application specific deployment profile - switch the build mode from debug to release. The end result is a much smaller mobile application (for example from 60 to 21mb) and a much faster deployment cycle (for me it is about twice as fast as before).

  Read the article

• The Home Stretch: NetBeans IDE 7.1 Release Candidate

  - by TinuA

  The first release candidate build of NetBeans IDE 7.1 is live and available for download, which means the big release (GA) is expected any day soon.NetBeans IDE 7.1 delivers support for JavaFX 2.0, enabling the full compile, debug and profile development cycle for JavaFX 2.0 applications and keeping developers in sync with the latest from the Java platform. Beyond JavaFX support, 7.1 also provides significant Swing GUI Builder enhancements, CSS3 support, and visual debugging tools for JavaFX and Swing user interfaces. And Git--a much anticipated featured--has been integrated into the IDE."The entire NetBeans team is tremendously excited about this release, which provides developers with more state-of-the-art tools for building front-end clients," says NetBeans Engineering Director John Jullion-Ceccarelli. "Whether you are doing JavaFX, HTML5, Swing, or JSF, NetBeans 7.1 will let you quickly and easily develop great-looking and full-featured clients for your Java or PHP-based applications."But there's one more task to check off before the general availability: The NetBeans team has launched a Community Acceptance Survey to get user feedback about the release candidate. Download the RC build, test it and take the survey to let the team know if NetBeans IDE 7.1 is ready for its debut!

  Read the article

• Discovery methods

  - by Owen Allen

  In Ops Center, asset discovery is a process in which the software determines what assets exist in your environment. You can't monitor an asset, or do anything to it through Ops Center, until it's discovered. I've seen a couple of questions about how to discover various types of asset, so I thought I'd explain the discovery methods and what they each do. Find Assets - This discovery method searches for service tags on all known networks. Service tags are small files on some hardware and operating systems that provide basic identification info. Once a service tag has been found, you provide credentials to manage the asset. This method can discover assets quickly, but only if the target assets have service tags. Add Assets with discovery profile - This method lets you specify targets by providing IP addresses, IP ranges, or hostnames, as well as the credentials needed to connect to and manage these assets. You can create discovery profiles for any type of asset. Declare asset - This method lets you specify the details of a server, with or without a configured service processor. You can then use Ops Center to install a new operating system or configure the SP. This method works well for new hardware. These methods are all discussed in more detail in the Asset Management chapter of the Feature Reference guide.

  Read the article

• X-notifier doesn't work in Chromium Browser

  - by cipricus

  It just keeps checking in vain. Also cannot import or export data, but get this error I use the latest versions of both in Lubuntu 12.04. In Google Chrome it works. What could it be the problem? Edit - following vasa1's comment - running sudo aa-status i get apparmor module is loaded. 16 profiles are loaded. 16 profiles are in enforce mode. /sbin/dhclient /usr/bin/evince /usr/bin/evince-previewer /usr/bin/evince-previewer//launchpad_integration /usr/bin/evince-previewer//sanitized_helper /usr/bin/evince-thumbnailer /usr/bin/evince-thumbnailer//sanitized_helper /usr/bin/evince//launchpad_integration /usr/bin/evince//sanitized_helper /usr/lib/NetworkManager/nm-dhcp-client.action /usr/lib/connman/scripts/dhclient-script /usr/lib/cups/backend/cups-pdf /usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper /usr/sbin/cupsd /usr/sbin/ntpd /usr/sbin/tcpdump 0 profiles are in complain mode. 3 processes have profiles defined. 3 processes are in enforce mode. /sbin/dhclient (1562) /usr/sbin/cupsd (916) /usr/sbin/ntpd (1695) 0 processes are in complain mode. 0 processes are unconfined but have a profile defined.

  Read the article

• SOA performance on SPARC T5 benchmark results

  - by JuergenKress

  The brand NEW super fast SPARC T5 servers are available. The platform is superb to run large SOA Suite environments or to consolidate your whole middleware platform. Some performance advices, recommended for all workloads: Performance profile for SOA apps on Oracle Solaris 11 BPEL (Fusion Order Demo) instances per second OSB (messages / transformations per second) Crypto acceleration study for SOA transformations SPARC T4 and T5 platform testing, pre-tuning Performance suitable for mid-to-high range enterprise in stand-alone SOA deployment or virtualized consolidation environment shared with Oracle applications 2.2x to 5x faster than SPARC T3 servers 25% faster SOA throughput, core to core than Intel 5600-series servers (running Exalogic software) SPARC T5 has 2x the consolidation density of Intel 5600-class processors 2x faster initial deployment time using Optimized Solutions pre-tested configuration steps Over 200 Application adapters for easiest Oracle software integration Would you like to get details? We can share with you on 1:1 bases T5 SOA Suite performance benchmarks, please contact your local partner manager or myself! SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: T5,TS Sparc,T5 SOA,bechmark,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Automatically keep your local git repos clean

  - by kerry

  Most developers using git are probably aware of a command ‘git gc’ that has to be run from time to time when you notice your git commands are running a little slow. This command cleans up your git repo and makes sure everything is nice and tidy. If you have not run this command lately, you will notice a huge performance increase in your git commands after running. It’s a bit annoying to have to run this command when you notice that your git performance is suffering. The command also takes a while if you have not run it recently. With this in mind, I decided to create a method to automatically run this command from time to time. So I decided to overload cd similar to how rvm does. All you have to do is paste the method in your .profile file and it will run the command every time you enter a directory with a git repo. You’ll notice a little pause when entering the directory, it’s not insufferable but if you would prefer, you can add an & to the end of the command to have it run in the background. I chose the pause over the pid output of the background command. Here it is in all it’s glory. View the code on Gist.

  Read the article

• Unified data source for k2 installed Joomla websites

  - by Özkan ÖZLÜ

  I am responsible for a few web sites of my organization. I use Joomla! 2.5.9 for those web sites. They all are running at the same server. I use K2 component for content managing. I have a general website in which shows all the staff information at the 'Staff' page. Also some of those people and their contents are shown in another department's website. So, there are databases for each web site. For example: In the general website (let's say general.org), when I click on the 'Staff' menu item, page shows all of the people work at my organization. Also they work at different departments. In another web site (eg: education.general.org) when I click on the 'Staff' menu item, it shows the people work at education department. But for each web site, I have different user accounts which means a modification in one of them does not affect the other one. If the one of the education staff tries to change his profile picture on the education web site, he also has to do it on the general web site. And sometimes one person might be working at two departments. Thus he has to edit three times of his data. Is it possible to merge the records for all websites? In other words, I want everyone to insert/update their data on the general web site, and the other web sites will be updated automatically.

  Read the article

• The balance between client and server functionality

  - by Eugen Martynov

  I want to bring the discussion that started in our teams and get your opinion about it. Assume we have an user account which could have different credentials for authentication and associated email to recover. An user has possibility to do signup with an email or use his social profile to complete signup process. As an Rest API from the backend to client looks like: Create account Authorise Update user data Link social account Register email Verify email In addition our BE is distributed and divided between several services/servers/clusters. So different calls are related to different end points. In case of the social sign up some of steps should be skipped or simplified. For example, with Facebook signup we could already skip email registration and verification step (we ask email permission form user), linking the social account and pre-fill user displayed name. So we proposed to have another end point which will hide/combine different calls on BE and return whole process result to the clients. The pros for this approach: No more duplication of functionality between clients Speed up the networking and user experience The cons for this approach: Additional work for backend Probably most complex scenarios in future updates I would like to get your opinion or experience with this situation. Especially if you already experienced point #2 from against reasons.

  Read the article

• Is there an elegant way to track multiple domains under separate accounts with google analytics?

  - by J_M_J

  I have a situation where a content management system uses the same template for multiple websites with different domain names and I can't make a separate template for each. However, each website needs to be tracked with Google analytics. Would this be appropriate to track each domain like this by putting in some conditional code? And would this be robust enough not to break? Is there a more elegant way to do this? <script type="text/javascript"> var _gaq = _gaq || []; switch (location.hostname){ case 'www.aaa.com': _gaq.push(['_setAccount', 'UA-xxxxxxx-1']); break; case 'www.bbb.com': _gaq.push(['_setAccount', 'UA-xxxxxxx-2']); break; case 'www.ccc.com': _gaq.push(['_setAccount', 'UA-xxxxxxx-3']); break; } _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; (document.getElementsByTagName('head')[0] || document.getElementsByTagName('body')[0]).appendChild(ga); })(); </script> Just to be clear, each website is a separate domain name and must be tracked separately, NOT different domains with same pages on one analytics profile.

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >