Search Results

Search found 14260 results on 571 pages for 'regex group'.

Page 105/571 | < Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >

• Cisco VPN Client Behind ASA 5505

  - by fdf33

  I'm trying to get connected to another ASA via Cisco VPN Client. I am behind an ASA 5505 myself and I am tryihng to VPN to a 5510. I get the message: Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I can connect to the other ASA if I use a normal cheap Linksys. Here's the version of my ASA: Result of the command: "sh ver" Cisco Adaptive Security Appliance Software Version 8.4(1) Any help would be great. Thanks running-config : Saved : Written by enable_15 at 23:12:32.378 UTC Fri Jul 1 2011 ! ASA Version 8.4(1) ! hostname aaaasa domain-name aaa.local enable password xxxxxxxxxxxxxxx encrypted passwd xxxxxxxxxxxxxxxxxxxx encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address xxx.xxx.xxx.xxx 255.255.254.0 ! interface Vlan5 no nameif security-level 50 ip address 172.16.0.254 255.255.255.0 ! interface Vlan500 no nameif security-level 100 ip address 10.10.10.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! boot system disk0:/asa841-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 4.2.2.2 domain-name aaa.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network A_93.97.168.1 host 93.97.168.1 object network rdp host 192.168.1.2 object network NETWORK_OBJ_192.168.1.0_24 subnet 192.168.1.0 255.255.255.0 access-list 101 extended permit tcp any host 192.168.1.2 eq 3389 access-list 101 extended permit icmp any any echo-reply access-list 101 extended permit icmp any any source-quench access-list 101 extended permit icmp any any time-exceeded access-list 101 extended permit icmp any any unreachable access-list 102 extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1492 ip local pool VPNPool 192.168.2.200-192.168.2.210 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-641.bin no asdm history enable arp timeout 14400 ! object network rdp nat (inside,outside) static interface service tcp 3389 3389 ! nat (inside,outside) after-auto source dynamic any interface access-group 101 in interface outside access-group 102 out interface outside ! router ospf 1 network 192.168.1.0 255.255.255.0 area 0 log-adj-changes ! route outside 0.0.0.0 0.0.0.0 93.97.168.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca certificate chain ASDM_TrustPoint0 certificate 8877d64d 30820248 308201b1 a0030201 02020488 77d64d30 0d06092a 864886f7 0d010105 05003036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c301e 170d3131 30353231 30383533 34325a17 0d323130 35313830 38353334 325a3036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100ea 1aa95141 480e616c efee6816 a96d6511 313b6776 cd3dd57b cd84b4d2 5e108aee 7c980086 4d92e2eb b6c7bf66 4585af0a ccbf153a db9270be c6f5c67b db9dd8d1 2f78d033 3348b056 df4be0da 70e08953 53adf294 9db6c020 597d250f bf448b43 b90179c8 ff0b15d8 744632d9 31c1945f 0b11e258 b4c1d224 692efff4 7b2f5102 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014493c 19db183a ab1af9e9 b1e44ad4 2a408b3c 89d1301d 0603551d 0e041604 14493c19 db183aab 1af9e9b1 e44ad42a 408b3c89 d1300d06 092a8648 86f70d01 01050500 03818100 1dd1760a fdd15941 4803fb9a cd6f44a7 2e275854 a1c0fbe1 d19f2cc9 182d43ef a547f854 8df96d15 3ea79c62 cf3fcb1c 5820360b c607dbfc 4de8bb16 19f727e9 b928a085 665816d8 138e4a35 ed610950 7910dd4a 0b1a9dd9 0e26f1c8 b78bc0cc cbf19eb2 4c4c3931 45199ea5 249e3266 661e44fd 7a00d376 dcfc6e4e d43f10b8 quit crypto isakmp nat-traversal 30 crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.1.0 255.255.255.0 inside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.5-192.168.1.36 inside dhcpd dns 4.2.2.2 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host number-of-rate 3 threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 82.219.4.31 source outside prefer ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside anyconnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 anyconnect profiles AnyConnectVPN_client_profile disk0:/AnyConnectVPN_client_profile.xml anyconnect profiles SSLAnyConnectVPN_client_profile disk0:/SSLAnyConnectVPN_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_AnyConnectVPN internal group-policy GroupPolicy_AnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client ssl-clientless default-domain value aaa.local webvpn url-list none anyconnect profiles value AnyConnectVPN_client_profile type user group-policy GroupPolicy_SSLAnyConnectVPN internal group-policy GroupPolicy_SSLAnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client default-domain value aaa.local webvpn anyconnect profiles value SSLAnyConnectVPN_client_profile type user username testuser password xxxxxxxxxxxxxxxxx encrypted privilege 0 username testuser attributes vpn-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLPOL type remote-access tunnel-group SSLPOL general-attributes default-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLAnyConnectVPN type remote-access tunnel-group SSLAnyConnectVPN general-attributes address-pool VPNPool default-group-policy GroupPolicy_SSLAnyConnectVPN tunnel-group SSLAnyConnectVPN webvpn-attributes group-alias SSLAnyConnectVPN enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect sip inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect xdmcp ! service-policy global_policy global prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:94a65341aa27d3929d5e92a32ba22120 : end

  Read the article

• Nginx trailing slash not working

  - by user1573604

  I am using the below to match urls and add a trailing slash. Under location / rewrite ^([^.]*[^/])$ $1/ permanent; According to he logs below, it is working, however the get request is still he old url, prior to adding the slash, which results in a 404. 2013/11/08 12:33:19 [notice] 29919#0: 92 "^([^.][^/])$" matches "/foo", client: 100.100.100.100, server: _, request: "GET /foo HTTP/1.1", host: "100.100.100.100" 2013/11/08 12:33:19 [notice] 29919#0: *92 rewritten redirect: "/foo/", client: 100.100.100.100, server: _, request: "GET /foo HTTP/1.1", host: "100.100.100.100" Any suggestions as to why this might be happening?

  Read the article

• Word doesn't want to open hyperlinks, and I can't find the policy setting

  - by michaelb958

  So I have a Surface RT (running Windows RT 8.1), and I have some Word documents with links in them. The thing is, they don't work. When I try to activate one, this happens instead: It's kind of annoying. This is a personal device, so I am the organisation - and after much spelunking and web-searching, I still can't find the relevant policy, which means I can't change it. Is it talking about Group Policy or something else entirely? Is this a[nother] Windows RT limitation, or some obscure switch I haven't found yet, or...?

  Read the article

• Is it possible to have regular-expression CNAME record in DNS?

  - by Kaizoku

  Is it possible to do something like this? Or any equivulent? in a DNS server. ([0-9]{2}).mydomain.com. IN CNAME www$1.other-domain.com.

  Read the article

• Is it possible to have regular-expression CNAME record in DNS?

  - by Kaizoku

  Is it possible to do something like this? Or any equivulent? in a DNS server. ([0-9]{2})\.mydomain\.com\. IN CNAME www$1.other-domain.com.

  Read the article

• Grant a user access to directories shared by root (mod: 770)

  - by Paul Dinham

  I want to grant a user (username: paul) access to all directories shared by root with mod 770. I do it this way: groups root (here comes a list of groups in which root user is) usermod -a -G group1 paul usermod -a -G group2 paul usermod -a -G group3 paul ... All the 'group1', 'group2', 'group3' are seen in the group list of root user. However, after adding 'paul' to all groups above, he still can not write to directories shared by root user with mod 770. Did I do it wrongly?

  Read the article

• Rsync and wildcards

  - by Jay White

  I am trying to back up both the "Last Session" and "Current Session" files for Google Chrome in one command, but using a wildcard doesn't seem to work. I am trying with the following command rsync -e "ssh -i new.key" -r --verbose -tz --stats --progress --delete '/cygdrive/c/Users/jay/AppData/Local/Google/Chrome/User Data/Default/*Session' user@host:"/chrome\ sessions/" and get the following error rsync: link_stat "/cygdrive/c/Users/jay/AppData/Local/Google/Chrome/User Data/Default/*Session" failed: No such file or directory (2) What am I doing wrong?

  Read the article

• Set default reminder pattern to iCal Calendar/Group

  - by elhombre

  Hi all I have in iCal some Calendars/Groups named Birthday, Exams and Holidays. Now I am wondering if I can assign a default reminder pattern to all Exams events, for example: 2 Weeks before, 1 Week before, 2 Days before. The result should be that I don't have to specify each time the reminder pattern of an event in Exams when I create a New one. NOTE: If iCal can't do this, is it maybe possible do that through an automator action etc.?

  Read the article

• The Koyal Group Info Mag News¦Charged building material could make the renewable grid a reality

  - by Chyler Tilton

  What if your cell phone didn’t come with a battery? Imagine, instead, if the material from which your phone was built was a battery. The promise of strong load-bearing materials that can also work as batteries represents something of a holy grail for engineers. And in a letter published online in Nano Letters last week, a team of researchers from Vanderbilt University describes what it says is a breakthrough in turning that dream into an electrocharged reality. The researchers etched nanopores into silicon layers, which were infused with a polyethylene oxide-ionic liquid composite and coated with an atomically thin layer of carbon. In doing so, they created small but strong supercapacitor battery systems, which stored electricity in a solid electrolyte, instead of using corrosive chemical liquids found in traditional batteries. These supercapacitors could store and release about 98 percent of the energy that was used to charge them, and they held onto their charges even as they were squashed and stretched at pressures up to 44 pounds per square inch. Small pieces of them were even strong enough to hang a laptop from—a big, fat Dell, no less. Although the supercapacitors resemble small charcoal wafers, they could theoretically be molded into just about any shape, including a cell phone’s casing or the chassis of a sedan. They could also be charged—and evacuated of their charge—in less time than is the case for traditional batteries. “We’ve demonstrated, for the first time, the simple proof-of-concept that this can be done,” says Cary Pint, an assistant professor in the university’s mechanical engineering department and one of the authors of the new paper. “Now we can extend this to all kinds of different materials systems to make practical composites with materials specifically tailored to a host of different types of applications. We see this as being just the tip of a very massive iceberg.” Pint says potential applications for such materials would go well beyond “neat tech gadgets,” eventually becoming a “transformational technology” in everything from rocket ships to sedans to home building materials. “These types of systems could range in size from electric powered aircraft all the way down to little tiny flying robots, where adding an extra on-board battery inhibits the potential capability of the system,” Pint says. And they could help the world shift to the intermittencies of renewable energy power grids, where powerful batteries are needed to help keep the lights on when the sun is down or when the wind is not blowing. “Using the materials that make up a home as the native platform for energy storage to complement intermittent resources could also open the door to improve the prospects for solar energy on the U.S. grid,” Pint says. “I personally believe that these types of multifunctional materials are critical to a sustainable electric grid system that integrates solar energy as a key power source.”

  Read the article

• using sed to replace 1 line with a multi-line variable in ksh

  - by Manda

  I have the following text in a file: XXXX NNNN YYYY NNNN ZZZZ NNNN I want to replace the NNNN to make it look like this: XXXX NNNN DUTY FORECASTER: YYYY NNNN DUTY FORECASTER: ZZZZ NNNN DUTY FORECASTER: How do I use sed to replace a variable with more than one line? Is there a better way of doing this without using sed? I have tried the following to no avail: sed 's/NNNN/"$value1"/g' testfile sed 's/NNNN/'"$value1"'/g' testfile sed 's/NNNN/${value1}/g' testfile sed 's/NNNN/'"${value1}"'/g' testfile I have also tried all of the above using double quotes. Any help is greatly appreciated. Thanks so much!

  Read the article

• unix command to verify span of word in text

  - by Ocasta Eshu

  What unix command(s) can I use to determine the line span that a word appears in text? The "span" being equal to the line number of the last instance of a word minus the line number of the first instance of the word. 1| unix is on two lines 2| once above, and once below 3| unix In the example above the "span" of 'unix' would be 2 (3-1). So far I've been trying to make use of grep -n but I don't think that grep is powerful enough. Maybe some use of sed or awk? Thanks!

  Read the article

• Batch deletion of smaller files from group of files via unix command line

  - by artlung

  I have a large number (more than 400) of directories full of photos. What I want to do is to keep the larger sizes of these photos. Each directory has 31 to 66 files in it. Each directory has thumbnails, and larger versions, plus a file called example.jpg I dispatched the example.jpg file easily with: rm */example.jpg I initially thought that it would be easy to delete the thumbnails, but the problem is they are not consistently named. The typical pattern was photo1.jpg and photo1s.jpg. I did rm */photo*s.jpg but it ended up some of the files named photoXs.jpg were actually larger and not smaller. Argh. So what I want to do is scan each directory for filesize and delete (or move) the thumbnails. I initially thought I'd just ls -R every file and extract the size of each file and save those under a threshold. The problem? In one directory the large will be 1.1 MB and the thumb is 200k. In another the large is 200k and the small 30k. Even worse, the files really are mostly named photo1.jpg - so simply putting them all in the same folder, sorting by size, and deleting in groups would not work without renaming already, and if it's possible I'd prefer to keep them in their folders. I was almost resolved to just doing this all manually, but then thought I'd ask here. How would you do this task?

  Read the article

• directory services group query changing randomly

  - by yamspog

  I am receiving an unusual behaviour in my asp.net application. I have code that uses Directory Services to find the AD groups for a given, authenticated user. The code goes something like ... string username = "user"; string domain = "LDAP://DC=domain,DC=com"; DirectorySearcher search = new DirectorySearcher(domain); search.Filter = "(SAMAccountName=" + username + ")"; And then I query and get the list of groups for the given user. The problem is that the code was receiving the list of groups as a list of strings. With our latest release of the software, we are starting to receive the list of groups as a byte[]. The system will return string, suddenly return byte[] and then with a reboot it returns string again. Anyone have any ideas? code sample: DirectoryEntry dirEntry = new DirectoryEntry("LDAP://" + ldapSearchBase); DirectorySearcher userSearcher = new DirectorySearcher(dirEntry) { SearchScope = SearchScope.Subtree, CacheResults = false, Filter = ("(" + txtLdapSearchNameFilter.Text + "=" + userName + ")") }; userResult = userSearcher.FindOne(); ResultPropertyValueCollection valCol = userResult.Properties["memberOf"]; foreach (object val in valCol) { if (val is string) { distName = val.ToString(); } else { distName = enc.GetString((Byte[])val); } }

  Read the article

• Network Explorer Intermittently Fails to Display all Computers in Work Group

  - by graf_ignotiev

  I run a small computer lab of 10 computers and occasionally, when using the network explorer (a.k.a Network Browser) some or all of the remote computers will fail to appear. If I try to access a remote computer by its name I get an unspecified error (code 0x80004005), but I am still able to access it with the computer's IP address. The strangest part is that the problem will inexplicably go away after waiting awhile. Each computer is running Windows 7 x64 Enterprise and has identical hardware, software and configuration. They are all on the same subnet and in the same workgroup. I've spent days researching the problem and have tried the following solutions: Updated the BIOS, chipset and network adapter drivers Changed Power Settings in Network Adapter Properties so that the computer will not turn it off Disabled the Computer Browser service Changed the DHCP node type to broadcast Reviewed the Event Viewer logs Steps 3 and 4 have seemed to help the problem a little bit, but not completely. I'm beginning to suspect that the problem might lie with our router which is a ZyXEL ZyWALL 2WG, as the packets sent by Network Discovery may not be returning in time, but I wanted to get some perspective in the issue before I went any further.

  Read the article

• is there a way to group desktop icons on the task bar

  - by Memor-X

  i have a folder on the desktop which has a bunch of programs i use frequently, i can't pin all these programs to the taskbar themselves as there are too many for the screen width that it'll just make the taskbar scrollable i am wondering if i can do one of the following pin the icons to the taskbar under 1 icon pin the folder to the taskbar separately to the Windows Explorer button which when there are no folders open will open up the libraries and if there are folders it'll show me the folders open, this way if i have 5 folders open and my frequently used programs folder i can just click on the frequently used programs folder icon on the taskbar and be given that folder only i'm trying to reduce the number of clicks, scrolling or scanning across the task bar i need to do in order to find a program

  Read the article

• Powershell: File copy/move with filename regular expressions?

  - by Ian Boyd

  i basically want to run: C:\>xcopy [0-9]{13}\.(gif|jpg|png) s:\TargetFolder /s i know xcopy doesn't support regular-expression filename searches. i am told that Powershell can do such a thing, although not given any syntax. Can anyone give the syntax of the above xcopy, but in PowerShell format?

  Read the article

• Implications of allowing Windows clients to use NTLMv1?

  - by Boden

  I have a web application that I'd like to authenticate to using pass-through NTLM for SSO. There is a problem, however, in that NTLMv2 apparently will not work in this scenario (without the application storing an identical password hash). I enabled NTLMv1 on one client machine (Vista) using its local group policy: Computer-Windows Settings-Security Settings-Network Security: LAN Manager authentication level. I changed it to Send LM & NTLM - use NTLMv2 session security if negotiated. This worked, and I'm able to login to the web application using NTLM. Now this application would be used by all of my client machines... so I'm wondering what the security risks are if I was push this policy out to all of them (not to the domain controller itself though)?

  Read the article

• Change Win7 desktop background via Win2k3 Group Policy

  - by microchasm

  I'm experiencing some strange behavior: I have set the following policies: User Configuration\Administrative templates\Desktop\Active Desktop Enable active desktop [enabled] Active Desktop Wallpaper [set to local path -- quadruple checked; path is correct] Allow only bitmap wallpaper [disabled] gpupdate /force, log out, log back in, and the background is just black. If I go into themes, and select Windows 7, the appointed background then shows (it also flashes when logging out). gpresult I've tried: http://social.technet.microsoft.com/Forums/en/winserverGP/thread/a1ebfe81-421e-4630-8c1f-8068222ee533 http://support.microsoft.com/default.aspx?scid=kb;EN-US;977944 http://social.technet.microsoft.com/Forums/en/w7itproui/thread/5b9e513a-d504-451d-a121-b4f94893d96d and a few other things, but nothing seems to be working :/ Thanks for any help/tips/advice.

  Read the article

• cgconfig.conf : setting root control group parameters

  - by delerious010

  I've got cpu, cpuacct and memory cgroups configured via /etc/cgconfig.conf ( cgconfig-bin on Lucid ). I can add new control groups, and assign processes to them however there does not seem to be a facility for changing the paramters of the root level memory cgroup ( the actual mount point ). How would one best set such parameters in a clean manner withoput c For example, I've the memory cgroup mounted to /var/run/cgroup/memory. I'd like to have /var/run/cgroup/memory/memory.use_hierarchy set to 1 on boot.

  Read the article

• Kerio group calendaring private/public functionality

  - by bsigrist

  We are considering a change of email servers and Kerio Connect is attractive. However, I am concerned about calendaring functionality. I found an old forum post that states the question well: "We want to create a single public calendar that everyone can see - using Windows XP/Outlook 2003/KOC 6.4.1. We want a way for people to put an entry in their own personal calendar and some how mark it so the entry auto add's or syncs with the public one. If an entry is private it wouldn't sync to the shared public calendar... Has anyone ever heard of a way to do this - in any way with any software?" This is a high priority feature, so if Kerio cannot do this, we may consider Exchange. Does Exchange provide functionality like that described?

  Read the article

• nginx dynamic servername with regular expression doesn't work for co.uk

  - by redn0x

  I'm trying to setup a nginx server which dynamically loads content from a folder for a domain. To do this I'm using regular expressions in the server name like so: server_name ((?<subdomain>.+)\.)?(?<domain>.+)\.(?<tld>.*); This will create a 3 variables for nginx to use later on, for example when using the following url: test.foo.example.com this will evaluate to: $subdomain = test.foo $domain = example $tld = com The problem arises when the co.uk top-level domain is used. In this case when using the url test.foo.example.co.ukit will evaluate to: $subdomain = test.foo.cedira $domain = co $tld = uk How can I edit the regular expression so that it will also work for co.uk?

  Read the article

• How to match a string in URI with regular expression?

  - by forestclown

  In my Apache config httpd.conf, I wish to setup a rule like below SetEnvIfNoCase %{QUERY_STRING} ^.*(getBook+)$ no-gzip dont-vary I am hoping to do no-gzip when my URL looks like http://myurl.fake.com/book/getBook3?id=234 http://myurl.fake.com/book/getBook1?id=xxx I am not sure if I can do that by setting up something like the above in httpd.conf.. The reason I do query string is because the url myurl.fake.com/book/getBook3 was mod_rewrite from myurl.fake.com/index.php?controller=book&action=getBook3 Thanks!

  Read the article

• How to execute everything in the Local Area Network

  - by matnagel

  We have a very small LAN here, but some peolpe here think we need Active Directory, though nobody knows how to maintain it. I am not in the position to change this. How can I get full access (on Linux it would be "execute" rights) also for files on network drives (the files are just on another machine next room) My account is in the group Administrators on a windows 2003 server Domain Controller. I cannot open simple MS Access 2000 Databases or CHM Files from network drives in the lan How to do that? Some policy setting? I want to change that once. It is useless. We have no distinction between local or network files here. I would have to copy everything to a local drive and then do what I want.

  Read the article

• How do I apply WinHTTP proxy settings domain-wide?

  - by Oliver Salzburg

  We're already configuring Internet Explorer proxy settings through group policy and it works great. Sadly, I've recently run into multiple issues where those settings are ignored by certain services. I realized that these service have one thing in common. They use WinHTTP, which has its own proxy settings. Now I'm asking myself how to apply those across the whole domain. I realize that I could create a logon script and simply run netsh winhttp import proxy source=ie, but, from experience I know that these settings require a reboot to take effect. So this wouldn't help me at all in a logon script. So, how can I do it?

  Read the article

• Parsing text files

  - by d03boy

  I encountered a situation tonight where I wanted to parse a text file. I had a very, very long word list that contained English words delimited by lines. I wanted to get rid of every word (or line) that was longer than 7 characters. This would be simple in Linux but I can't seem to find a simple solution in WindowsXP. I tried using Notepad++ regular expression search but that was a huge failure. I tried using the expression .{6,} without finding any matches. I'm really at a loss because I thought this sort of thing would be extremely easy and there would be tons of tools to accomplish a task like this. It seems like Notepad++ supports every other feature in the world except the very basic ones that seem the most obvious. Another one of my goals was to put some code before and after the word on each line. aardvark apple azolio would turn into INSERT INTO Words (word) VALUES ('aardvark'); INSERT INTO Words (word) VALUES ('apple'); INSERT INTO Words (word) VALUES ('azolio'); What suggestions/tools/tips do you have to accomplish tasks similar to this in WindowsXP?

  Read the article

< Previous Page | 101 102 103 104 105 106 107 108 109 110 111 112  | Next Page >