Dynamics In the GPU Market
Will the discrete GPU become a dinosaur in the near future?
Graphics processing unit - Art - Nvidia - Collecting - Video card
Search Results
Search found 8185 results on 328 pages for 'capture card'.
Page 106/328 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113 | Next Page >
-
-
3+ monitors, nvidia + intel graphics
- by gozzilli
I have seen lots of different posts on this issue, but I cannot figure out what to do. I hope we can collect the available information in one place, so that they can be useful for others. Is it possible to have multiple (3+) monitors running on two different graphics cards? I have 1x nVidia GeForce GTX 550 with 2 DVI ports and 1x Intel integrated graphics, with 2 DVI ports. I understand that they would be running on different instances of X servers. Is that correct? Could someone point me in the right direction to start? On Windows it's so simple, there is no additional thing to do other than going in display preferences and activating all 3+ monitors. They can even be laid out alternating one monitor from one graphics card with another monitor from the other card.Read the article
-
Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to get it to work?
- by zewone
I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686  Any help much appreciated... Thanks, Philippe 31-10-2012 ... I have some more updates. When I do the following command it does see my Wifi router... So even if it is still disabled... the card seems to work and see the router (ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E") See below: sudo iwlist wlan1 scanning wlan1 Scan completed : Cell 01 - Address: 00:19:70:8F:B0:EA Channel:10 Frequency:2.457 GHz (Channel 10) Quality=51/70 Signal level=-59 dBm Encryption key:on ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000025dbf2188 Extra: Last beacon: 108ms ago IE: Unknown: 002035373931424332362D434539432D313144312D393742462D3030303046383145 IE: Unknown: 010882848B960C121824 IE: Unknown: 03010A IE: Unknown: 0706424520010D14 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000Read the article
-
Cuda GeForce GT 555m (on Ubuntu 12.04 (Virtual Box))
- by bobby
I am running Ubuntu 12.04 in a Virtual Box as guest OS. Today I have tried to enable all functions of my graphic card under Ubuntu. But all my efforts were off the mark... because my experience with Linux is relatively small... I have tried the procedure which is described as in http://sn0v.wordpress.com/2012/05/11/installing-cuda-on-ubuntu-12-04/. Running the cuda-filepack always lead to an error like "installing driver canceled". Then I have tried to install the Bumblebee project. But I always get the error that the bumblebee daemon is not started. After some internet research I found a test-command lspci -nn | grep '[030[02]]' which results in 00:02.0 VGA compatible controller [0300]: InnoTek ... [80ee:beef] I've been trying to activate the card you for hours without success. Could you please give me some hints how to activate CUDA? Kind regardsRead the article
-
nVidia GeForce Go 7600? can it ever run unity?
- by Khaled Musleh
my laptop Toshiba Qosmio G30 has nVidia GeForce Go 7600 card and it suppose to support 3D . i run unity 2d now . I run 12.04 and the graphic driver is--VESA: G73 Board - toshg73m-- by UBUNTU. when i run /usr/lib/nux/unity_support_test -p then i get this list Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no the card is not blacklisted but a similar one with GT is! Do you think that there is a chance the laptop can run the unity 3d? and may be i could change the resolution of the screen to a higher one too! I tried all the nvidia drivers provided but none works (except 96 in ubuntu 12.04 ). i get a black screen or terminal screen. best wishes to allRead the article
-
Will Apple abandon OpenCL?
- by John
I am developing OpenCL applications, amongst others for MacOS. The new Macbook pro 13 inch comes with an Intel HD Graphics 3000 card so it seams reasonable to assume all their mainstream computers like Macbook and Mac mini will also come out with this Intel graphics card soon. OpenCL is not available for Intel graphics cards. Intel having a terrible reputation in developing graphics drivers and Apple knowing this makes me wonder Apple is abandoning OpenCL already again. Especially considering OpenCL should run anywhere, not only on high end systems. Developing applications only for the high end Macs with dedicated graphics hardware or for previous generation hardware with the Geforce 320M would not be a feasible option for me. Does anybody have any thoughts on this?Read the article
-
After upgrading to 13.04 Unity interface is not showing
- by ?????? ?????
I've upgraded to Raring last night. The upgrade itself went okay, no errors. But when I rebooted the computer afterwards and logged in to my Unity session, all I could see was the Desktop background (together with Desktop icons), and no Unity interface. The Super button shortcut wasn't showing the Dash, there was no top panel etc. Please see the screenshot. As a hint, I'm suspecting it's got something to do with my switchable graphics. I'm running Ubuntu on Acer Aspire AS5830TG with nVidia GT540M and an Intel integrated card. In 12.10 I was using Bumblebee to manage the graphic card switching. During the upgrade I saw something related to nvidia had to be uninstalled, but didn't pay much attention to it. I can't be sure if it has anything to do with my problem though. What could possibly go wrong?Read the article
-
Horible lag on Xubuntu media center setup
- by William
I am setting up a media center running Xubuntu 11.10 as a media center. It is using the XFCE desktop enviroment. I have the NVIDIA drivers installed from the Additional Drivers program, and uninstalled all but the esennitial software. The computer is a Dell Dimension 3000. You can view detailed technical specifications here. The graphics card installed is a Geforce 8400 GS. I have installed all updates through Update Manager. What can I do to fix the horrible lag? It makes watching TV impossible.I have uploaded two videos of the lag, here and here. The second one does not have sound because the sound stops playing on some channels that lag a lot. The TV card is a Hauppage 950q USB, and the TV recording program is Kaffiene. Please help me with this, I am trying to do this to show how great Ubuntu is to the rest of the family.Read the article
-
How do I install the Intel Graphics driver in my system?
- by John
Can someone help me out and explain or point me in the right direction on how to check video drivers and see if my video card running okay? I had 10.04 installed on my Thinkpad r61 with Compiz Manager and life was great, until the machine took water damage. I bought an ASUS (X54H) since and am trying out 12.04, but the desktop just doesn't look right. I always struggled with video driver installation. There are no proprietary drivers available in the hardware manager. When I run lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I will greatly appreciate your help. I want to use Linux more, but like I said video drivers appear to be my biggest concern. I have also tried 12.04 on my desktop PC, but again failed to configure video card, so switched back to Windows 7.Read the article
-
Cannot mount Android phone and sync with Banshee
- by Brett Alton
I can't get my LG Optimus One to sync with Banshee. I read somewhere that the root needs to have an empty file called '.is_audio_player'. I did that and it still doesn't mount. I ran dmesg however and it appears that the card is unmounting before I even have a change to run Banshee. [ 7250.321359] usb 1-1.4: new high speed USB device using ehci_hcd and address 10 [ 7250.444795] scsi12 : usb-storage 1-1.4:1.0 [ 7251.567946] scsi 12:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 7251.568839] sd 12:0:0:0: Attached scsi generic sg3 type 0 [ 7252.232433] sd 12:0:0:0: [sdc] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB) [ 7252.233299] sd 12:0:0:0: [sdc] Write Protect is off [ 7252.233306] sd 12:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 7252.233309] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 7252.235658] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 7252.235666] sdc: sdc1 [ 7252.239132] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 7252.239140] sd 12:0:0:0: [sdc] Attached SCSI removable disk [ 7272.573437] usb 1-1.4: USB disconnect, address 10 Suggestions?Read the article
-
Mount to /dev/sdb1 without password
- by Jarmo
I am unable to mount a USB drive (or SD card) to my system without root access. When I plug in a USB drive, it is visible in the left column of Nautilus, but when I click on it to open it, I receive the error message Unable to mount 2.1 GB Filesystem Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/sdb1 I am able to mount the drive using sudo mount -w /dev/sdb1, but this causes problems for operations such as creating startup discs, which requires unmounting and remounting the drive. I suspect this problem may be caused by the fact that when I upgraded from 11.10 to 12.04, I had an SD card plugged in. This caused the system to stall during later startups, as it could not find this drive. I remedied this by editing a line of /etc/fstab to read /dev/sdb1 /media/sdb1 vfat noauto 0 0 However, I am dual booting Ubuntu with Windows XP, and I have no problem mounting the C: drive of the Windows system without root access, so I feel that this is a problem related to the mount point rather than mounting in general.Read the article
-
USB sound device not recognized
- by David E. Anderson
I have a USB sound device that used to work back when I ran other versions of Ubuntu. Now I can only partially see the device. I have tried many things I saw in Google searches, but none solve my problem. cat /proc/asound/cards sees the device as card 0 aplay -l shows C-Media USB Audio as card 0 alsamixer sees the device asoundconf list does not show the device sound preferences shows no hardware asoundconf-gtk set the device to pulseaudio, but fails with python errors ending in ValueError: too many values to unpack in the function set_default_card. I think this is the cause of my problem. The device is a Sony virtual phones wireless headphone amplifier.Read the article
-
Unable to connect to wireless network
- by Mike
A real newbie here. Just downloaded Ubuntu 12.10, put on USB stick and have booted it on my other PC after modifying the boot sequence to boot from USB before hard drive where Windows XP lives. Have no problems with Windows and my wireless but not with Ubuntu. The PC is a Dell Latitude D630 laptop. According to Windows XP , the wireless card is a Dell Wireless 1490 Dual Band WLAN Mini-Card, my IP address is 192.168.0.193, subnet mask is 255.255.255.0, assigned by DHCP, SSID is HOME , type 802.11 and default gateway is 192.168.0.1. Ok, back to booting from USB and TRY option, I am Editing Network connections, I have created/configured "Wireless connection 1" with SSID of HOME and the only other thing I have changed is on the "Editing IPV4 routes for Wireless connection 1 I have enterred 192.168.0.193 , netmask 255.255.255.0 and gateway 192.168.0.1 Anyways , no go. Could use some help. Thanks, Mike from MontrealRead the article
-
Neo4j increasing latency as SKIP increases on Cypher query + REST API
- by voldomazta
My setup: Java(TM) SE Runtime Environment (build 1.7.0_45-b18) Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode) Neo4j 2.0.0-M06 Enterprise First I made sure I warmed up the cache by executing the following: START n=node(*) RETURN COUNT(n); START r=relationship(*) RETURN count(r); The size of the table is 63,677 nodes and 7,169,995 relationships Now I have the following query: START u1=node:node_auto_index('uid:39') MATCH (u1:user)-[w:WANTS]->(c:card)<-[h:HAS]-(u2:user) WHERE u2.uid <> 39 WITH u2.uid AS uid, (CASE WHEN w.qty < h.qty THEN w.qty ELSE h.qty END) AS have RETURN uid, SUM(have) AS total ORDER BY total DESC SKIP 0 LIMIT 25 This UID has about 40k+ results that I want to be able to put a pagination to. The initial skip was around 773ms. I tried page 2 (skip 25) and the latency was around the same even up to page 500 it only rose up to 900ms so I didn't really bother. Now I tried some fast forward paging and jumped by thousands so I did 1000, then 2000, then 3000. I was hoping the ORDER BY arrangement will already have been cached by Neo4j and using SKIP will just move to that index in the result and wont have to iterate through each one again. But for each thousand skip I made the latency increased by alot. It's not just cache warming because for one I already warmed up the cache and two, I tried the same skip a couple of times for each skip and it yielded the same results: SKIP 0: 773ms SKIP 1000: 1369ms SKIP 2000: 2491ms SKIP 3000: 3899ms SKIP 4000: 5686ms SKIP 5000: 7424ms Now who the hell would want to view 5000 pages of results? 40k even?! :) Good point! I will probably put a cap on the maximum results a user can view but I was just curious about this phenomenon. Will somebody please explain why Neo4j seems to be re-iterating through stuff which appears to be already known to it? Here is my profiling for the 0 skip: ==> ColumnFilter(symKeys=["uid", " INTERNAL_AGGREGATE65c4d6a2-1930-4f32-8fd9-5e4399ce6f14"], returnItemNames=["uid", "total"], _rows=25, _db_hits=0) ==> Slice(skip="Literal(0)", _rows=25, _db_hits=0) ==> Top(orderBy=["SortItem(Cached( INTERNAL_AGGREGATE65c4d6a2-1930-4f32-8fd9-5e4399ce6f14 of type Any),false)"], limit="Add(Literal(0),Literal(25))", _rows=25, _db_hits=0) ==> EagerAggregation(keys=["uid"], aggregates=["( INTERNAL_AGGREGATE65c4d6a2-1930-4f32-8fd9-5e4399ce6f14,Sum(have))"], _rows=41659, _db_hits=0) ==> ColumnFilter(symKeys=["have", "u1", "uid", "c", "h", "w", "u2"], returnItemNames=["uid", "have"], _rows=146826, _db_hits=0) ==> Extract(symKeys=["u1", "c", "h", "w", "u2"], exprKeys=["uid", "have"], _rows=146826, _db_hits=587304) ==> Filter(pred="((NOT(Product(u2,uid(0),true) == Literal(39)) AND hasLabel(u1:user(0))) AND hasLabel(u2:user(0)))", _rows=146826, _db_hits=146826) ==> TraversalMatcher(trail="(u1)-[w:WANTS WHERE (hasLabel(NodeIdentifier():card(1)) AND hasLabel(NodeIdentifier():card(1))) AND true]->(c)<-[h:HAS WHERE (NOT(Product(NodeIdentifier(),uid(0),true) == Literal(39)) AND hasLabel(NodeIdentifier():user(0))) AND true]-(u2)", _rows=146826, _db_hits=293696) And for the 5000 skip: ==> ColumnFilter(symKeys=["uid", " INTERNAL_AGGREGATE99329ea5-03cd-4d53-a6bc-3ad554b47872"], returnItemNames=["uid", "total"], _rows=25, _db_hits=0) ==> Slice(skip="Literal(5000)", _rows=25, _db_hits=0) ==> Top(orderBy=["SortItem(Cached( INTERNAL_AGGREGATE99329ea5-03cd-4d53-a6bc-3ad554b47872 of type Any),false)"], limit="Add(Literal(5000),Literal(25))", _rows=5025, _db_hits=0) ==> EagerAggregation(keys=["uid"], aggregates=["( INTERNAL_AGGREGATE99329ea5-03cd-4d53-a6bc-3ad554b47872,Sum(have))"], _rows=41659, _db_hits=0) ==> ColumnFilter(symKeys=["have", "u1", "uid", "c", "h", "w", "u2"], returnItemNames=["uid", "have"], _rows=146826, _db_hits=0) ==> Extract(symKeys=["u1", "c", "h", "w", "u2"], exprKeys=["uid", "have"], _rows=146826, _db_hits=587304) ==> Filter(pred="((NOT(Product(u2,uid(0),true) == Literal(39)) AND hasLabel(u1:user(0))) AND hasLabel(u2:user(0)))", _rows=146826, _db_hits=146826) ==> TraversalMatcher(trail="(u1)-[w:WANTS WHERE (hasLabel(NodeIdentifier():card(1)) AND hasLabel(NodeIdentifier():card(1))) AND true]->(c)<-[h:HAS WHERE (NOT(Product(NodeIdentifier(),uid(0),true) == Literal(39)) AND hasLabel(NodeIdentifier():user(0))) AND true]-(u2)", _rows=146826, _db_hits=293696) The only difference is the LIMIT clause on the Top function. I hope we can make this work as intended, I really don't want to delve into doing an embedded Neo4j + my own Jetty REST API for the web app.Read the article
-
Configure audio on HP ENVY 4 ultrabook
- by phodu_insaan
I want to configure audio for ubuntu 12.04 on my laptop. Currently the audio just does not play. If i try and plug in headphones then somewhere midway to being fully plugged in the audio plays on the headphones, I plug in further and the sound disappears. How do I get this to work? lspci | grep audio Audio device: Intel Corporation Panther Point High Definition Audio Controller My laptop is one the beats edition HP laptops, and the driver for win7 was an IDT HD audio driver. --EDIT-- The output for cat /proc/asound/card0/codec* | grep Codec is Codec: IDT 92HD91BXX Codec: Intel PantherPoint HDMI I need to get both the IDT card to work and the HDMI card to work with my TV. --EDIT-- --EDIT 2-- I have added blacklist snd-usb-audio to the end of the file /etc/modprobe.d/alsa-base.conf Now the sound plays from my laptop speakers only when I plug in a headphones/external speaker. Otherwise no sound. :( Please help getting everything working as it should. --EDIT 2-- ThanksRead the article
-
Unable to install 12.10 on asus r500v
- by bmdr38
I have been unable to get beyond the grub boot screen of the live dvd/usb. The Try Ubuntu without installing, Install Ubuntu, etc menu shows, and I have tried adding/replacing nomodeset and no splash with neither helping. Even "Check disc for defects" does not display anything when selected. I am at a complete loss as to how to fix this one. I have had many successful installs in the past, but this is definitely a first for me. Just as FYI, Gfx card: Geforce GT 635M I realize this particular card has Optimus on it, however even the alternative boot/command line install fails to load. Any help would be appreciated. I realize there have been multiple threads on this, but none of the methods within them have solved this yet. ThanksRead the article
-
How to Get the Folder Name of USB Disk?
- by Kate Moss' Open Space
When an USB Disk plugs into CE/Mobile based device, how do you know the folder name of the mounting point? Usually, it should be "USB Disk" but it is really depends on how OS image builder; they may change the folder name for whatever reason. FindFirstFlashCard looks simple and promising, the drawback is it only available on Windows Mobile. In fact, these find flash card API set will enumerate all of the mountable file system which includes SD card, CF and etc that we don't expect to get. So I am going to introduce you another way via Storage Manager. Here is the steps.Read the article
-
Are there any additional considerations to make when designing a site structure if you plan to use persistent connection technologies?
- by Psytronic
As the title states, I'm thinking of making a simple-card-game based website, using persistent connection technology (Something like signalR) for the actual game part of it. I've never planned a site to use this technology, and wondering for those who have, are there any additional things that need to be taken into consideration for the site structure? I'm planning on using the asp MVC framework for the whole thing, and starting off with some simple game (e.g. card based Rock/Paper/Scissors) for proof of concept (to see if I can get it working how I think it would in my head).Read the article
-
What options are there for integrating with payment gateways? [closed]
- by Rowland Shaw
It seems that there are only two types of payment gateway service out there at the moment; Either that the entire cart logic is handled offsite (with something like Paypal's Standard option) or the other option being that you need to go through the certification for handling credit card numbers and doing pretty much everything yourself. Ideally, for the project I'm working on, I'm after a bit of middle ground such that I can handle the cart on-site, and only pass over to a payment gateway (with an order amount, billing & delivery details, and order ref) for them to handle the card details, before passing back. I'm sure that I've used e-commerce sites using this pattern before, but I cannot find any payment providers out there that offer this sort of option, so are there any? The only over requirement we have at present is that it must accept orders in Sterling.Read the article
-
How to make Bluetooth headset appear as a sound device?
- by torbengb
I have an onboard VIA sound card but no speakers attached. Instead, I want to use my bluetooth headset as my only sound device, both input and output (mono). I plugged in the bt dongle and was impressed that it was ready to use within seconds. I then paired it to my Jabra BT500 headset. No problems so far. I then went to Sound Preferences but no bluetooth is listed, only the onboard VIA sound card. Question: How can I enable my headset, and make it the default all the time?Read the article
-
No mobile broadband wizard with a GOBI2000
- by XenGi
My details: Thinkpad T410 GOBI 2000 WWAN Ubuntu 12.10 with Gnome3 In Ubnutu 12.04, Debian Squeeze and Debian Wheezy my GOBI2000 works like a charm but in Ubuntu 12.10 the connection wizard doesn't show up. I configured the card the normal way: added thnkpad ppa install gobi-loader-tp copied firmware files to /lib/firmware/gobi/ (the same files work under debian) The card is correctly recognised and my SIM is detected too. the only problem is when I try to setup a new connection the wizard doesn't start. simply nothing happens. Any idea?Read the article
-
Trying to setup a gateway via pppoe
- by Bob
I just installed Ubuntu 12.04 on a computer. I want to use this computer as a router for my other computers. The computer only has 1 network card, there is no slot for a second card. I can get the computer to connect to my ISP via pppoe and it can access the web. However the other computers on my local net can only see the router computer. I have tried 2 different pppoe packages, roaring penguin and network-manager-gnome. When I get it to work I will be replacing a 15 year old computer that is running Slackware 7.1. The old computer is currently my router. It is running Roaring Penguin I tried to setup the new computer with the same Roaring Penguin parameters as the old computer. BobRead the article
-
Dual monitor setup with Intel graphics and Nvidia Geforce GT 425M on 12.04
- by fo_x86
I have a Dell XPS L401x and just installed 12.04. I have a mini-display and an HDMI output, and I could hook up two Dell UltraSharp monitors to each port on Windows 7, and get a triple monitor setup. Doing a bit of research, it seems like the mini-display is wired to the integrated graphics card whereas HDMI is hooked up to Nvidia graphics card. I've also installed Bumblebee as it seemed like that was the proper way of installing Nvidia drivers on Ubuntu. At the moment none of my monitors is being recognized by Ubuntu. Is it even possible to have a triple monitor (laptop display + 2 external) setup? Has anyone successfully done this?Read the article
-
Installing Ubuntu Server 11.04
- by Jackson Walters
Trying to install Ubuntu Server 11.04 on an 64-bit AMD machine. The install goes fine until after "Loading additional components", then I get a blank purple screen with a responsive cursor at the bottom. I've looked everywhere and can't find anything (all the documentation seems to be on the desktop version). I have a wireless card installed if that makes a difference, don't why it would. This happens regardless of whether nomodeset is set. Here's what it looks like (as described): Specs: CPU - 64-bit AMD Sempron 140 @ 2.7Ghz RAM - 1Gb DDR3 1333 HDD - WD 500Gb 7200RPM SATA 3.0Gb/s Mobo - Foxconn M61PMP-K Wireless Card - Rosewill RNX-G300LXRead the article
-
No sound on fresh install of 13.10
- by Totalnon
I installed a new copy of 13.10 today and cannot get my audio to work. Speakers test good on other devices, enabled in the BIOS, worked this morning in a Windows environment. I ran all of the available updates through apt-get. aplay -l lists my card (which tells me Ubuntu recognizes the hardware, I have been looking around the web and trying various things to no avail. Pulse folder permissions seem fine, I've reinstalled ALSA, and the card shows both digital and analog in the system settings sound section. I have tried this guide: Sound Troubleshooting Guide As well as looked through these forums under the tags sound and 13.10 Anyone have any ideas that may help me?Read the article
