Search Results

Search found 19782 results on 792 pages for 'device emulator manager'.

Page 106/792 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• Canon MG6100 series USB printer receives job but doesn't physically print

  - by Old-linux-fan

  Printer MP6150 driver installed itself upon plugging in the printer. Printer is recognized (lsusb shows it) but does not mount. If the printer is recognized, the driver must be working (or?), but something is blocking the system from mounting the printer. Tried the usual things: power of printer, restart Ubuntu etc. Listed below result of lsusb and fstab: hans@kontor-linux:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 04a9:174a Canon, Inc. Bus 002 Device 002: ID 1058:1001 Western Digital Technologies, Inc. External Hard Disk [Elements] Bus 004 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser hans@kontor-linux:~$ sudo cat /etc/fstab [sudo] password for hans: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=eaf3b38d-1c81-4de9-98d4-3834d674ff6e / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=93a667d3-6132-45b5-ad51-1f8a46c5b437 none swap sw 0 0

  Read the article

• USB mass storage couldn't get mounted

  - by revo

  It's my android phone SD card which was indicated damaged by android yesterday night, out of the blue! I put it directly to a USB port with a USB SD card holder case, so in that way I can recover it with TestDisk, which I had experienced before on a similar situation. I also noticed that there is a change in file system and capacity: File System : RAW Capacity : 0 (unknown capacity) Also TestDisk doesn't show it on its partitions list. A 2 GB SD card is not that important in price but I've a lot of files and medias which I need them. Used a mini card reader, TestDisk displayed it on its list but a quick search and or a deep search doesn't have any results No partition found or selected for recovery and then I should quit the program. Your help is appreciated. Update #2 lsusb output: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 04f3:0234 Elan Microelectronics Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  Read the article

• USB Keyboard doesn't work in Ubuntu 14.04

  - by Steven Crossan

  My USB keyboard isn't working in Ubuntu 14.04, but also didn't work in 13.10. I upgraded today in the hope that the issue would be resolved, but it wasn't. The keyboard works in BIOS and GRUB but stops working when I reach the login screen. It is detected by the system, but just doesn't work. Output of lsusb: Bus 002 Device 002: ID 0846:9011 NetGear, Inc. WNDA3100v2 802.11abgn [Broadcom BCM4323] Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 1532:000d Razer USA, Ltd Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 060b:2231 Solid Year KSK-6001 UELX Keyboard Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I added: hid usbhid hid_generic ohci_pci To /etc/initramfs-tools/modules and did update-initramfs -u, but that didn't work. I'm new to Ubuntu/Linux and any help you could provide would be greatly appreciated!

  Read the article

• external hard drive not detected after ubuntu crash [restarting machine]

  - by Netmoon

  today i tried to watch movie [with vlc media player] from my external hard drive [expansion portable 500 GB], and it's play good, then pause the movie and play it again, and my Ubuntu crashed! [Ubuntu 12.04]i had to restart the machine, so did it, but after that Ubuntu can't recognize this hard drive! i changed USB cable but it was not effective. this is my dmesg command result : [ 191.281630] usb 2-1.3: new full-speed USB device number 9 using ehci_hcd [ 191.353527] usb 2-1.3: device descriptor read/64, error -32 [ 191.529115] usb 2-1.3: device descriptor read/64, error -32 [ 191.704669] usb 2-1.3: new full-speed USB device number 10 using ehci_hcd [ 191.776524] usb 2-1.3: device descriptor read/64, error -32 [ 191.952202] usb 2-1.3: device descriptor read/64, error -32 [ 192.127772] usb 2-1.3: new full-speed USB device number 11 using ehci_hcd [ 192.534742] usb 2-1.3: device not accepting address 11, error -32 [ 192.606749] usb 2-1.3: new full-speed USB device number 12 using ehci_hcd [ 193.013696] usb 2-1.3: device not accepting address 12, error -32 [ 193.013906] hub 2-1:1.0: unable to enumerate USB device on port 3 note: I am able to hear the sound of the external drive lens. When attach hard drive to usb port, the status light goes on, but it's low bright and i think its power is low! try to mount in Microsoft Windows 7, but nothing happened.

  Read the article

• Problem on getting the vendor id and product id of a usb device

  - by new

  Hi... my application comes and prints this "\?\usb#vid_04f2&pid_0111#5&1ba5a77f&0&2#{a5dcbf1 0-6530-11d2-901f-00c04fb951ed}" again it goes to while loop .... here it gets breaked in the else statement... Qt Code: if (GetLastError() == ERROR_INSUFFICIENT_BUFFER) { // Change the buffer size. if (buffer) LocalFree(buffer); buffer = (LPTSTR)LocalAlloc(LPTR,buffersize); } else { qDebug ()<<"Here it quits the application"; // Insert error handling here. break; } Any ideas in this.... full source code comes here static GUID GUID_DEVINTERFACE_USB_DEVICE = { 0xA5DCBF10L, 0x6530, 0x11D2, { 0x90, 0x1F, 0x00, 0xC0, 0x4F, 0xB9, 0x51, 0xED } }; HANDLE hInfo = SetupDiGetClassDevs(&GUID_DEVINTERFACE_USB_DEVICE,NULL,NULL, DIGCF_PRESENT | DIGCF_INTERFACEDEVICE); if ( hInfo == INVALID_HANDLE_VALUE ) { qDebug ()<<"invalid"; } else { qDebug ()<<"valid handle"; SP_DEVINFO_DATA DeviceInfoData; DeviceInfoData.cbSize = sizeof(SP_DEVINFO_DATA); SP_INTERFACE_DEVICE_DATA Interface_Info; Interface_Info.cbSize = sizeof(Interface_Info); BYTE Buf[1024]; DWORD i; DWORD InterfaceNumber= 0; PSP_DEVICE_INTERFACE_DETAIL_DATA pspdidd = (PSP_DEVICE_INTERFACE_DETAIL_DATA) Buf; for (i=0;SetupDiEnumDeviceInfo(hInfo,i,&DeviceInfoData);i++) { DWORD DataT; LPTSTR buffer = NULL; DWORD buffersize = 0; while (!SetupDiGetDeviceRegistryProperty( hInfo, &DeviceInfoData,SPDRP_DEVICEDESC, &DataT,(PBYTE)buffer,buffersize, &buffersize)) { if (GetLastError() == ERROR_INSUFFICIENT_BUFFER) { // Change the buffer size. if (buffer) LocalFree(buffer); buffer = (LPTSTR)LocalAlloc(LPTR,buffersize); } else { // Insert error handling here. break; } qDebug ()<<(TEXT("Device Number %i is: %s\n"),i, buffer); if (buffer) LocalFree(buffer); if ( GetLastError() != NO_ERROR && GetLastError() != ERROR_NO_MORE_ITEMS ) { // Insert error handling here. qDebug ()<<"return false"; } InterfaceNumber = 0; // this just returns the first one, you can iterate on this if (SetupDiEnumDeviceInterfaces(hInfo, NULL, &GUID_DEVINTERFACE_USB_DEVICE, InterfaceNumber, &Interface_Info)) { printf("Got interface"); DWORD needed; pspdidd->cbSize = sizeof(*pspdidd); SP_DEVICE_INTERFACE_DETAIL_DATA *pDetData = NULL; DWORD dwDetDataSize = sizeof (SP_DEVICE_INTERFACE_DETAIL_DATA) + 256; pDetData = (SP_DEVICE_INTERFACE_DETAIL_DATA*) malloc (dwDetDataSize); pDetData->cbSize = sizeof (SP_DEVICE_INTERFACE_DETAIL_DATA); SetupDiGetDeviceInterfaceDetail(hInfo,&Interface_Info, pDetData,dwDetDataSize, NULL,&DeviceInfoData); qDebug ()<<pDetData->DevicePath; qDebug ()<<QString::fromWCharArray(pDetData->DevicePath); free(pDetData); } else { printf("\nNo interface"); //ErrorExit((LPTSTR) "SetupDiEnumDeviceInterfaces"); if ( GetLastError() == ERROR_NO_MORE_ITEMS) printf(", since there are no more items found."); else printf(", unknown reason."); } // Cleanup SetupDiDestroyDeviceInfoList(hInfo); } } }

  Read the article

• Connecting Android device to multiple Bluetooth serial embedded peers

  - by TacB0sS

  I'm trying to find a solution for this setup: I have a single Android device, which I would like to connect to multiple serial embedded devices... And here is the thing, using the "Normal" way to retrieve the Bluetooth socket, doesn't work on all devices, and while it does, I can connect to multiple devices, and send and receive data to and from multiple devices. public final synchronized void connect() throws ConnectionException { if (socket != null) throw new IllegalStateException("Error socket is not null!!"); connecting = true; lastException = null; lastPacket = null; lastHeartBeatReceivedAt = 0; log.setLength(0); try { socket = fetchBT_Socket_Normal(); connectToSocket(socket); listenForIncomingSPP_Packets(); connecting = false; return; } catch (Exception e) { socket = null; logError(e); } try { socket = fetchBT_Socket_Workaround(); connectToSocket(socket); listenForIncomingSPP_Packets(); connecting = false; return; } catch (Exception e) { socket = null; logError(e); } connecting = false; if (socket == null) throw new ConnectionException("Error creating RFcomm socket for" + this); } private BluetoothSocket fetchBT_Socket_Normal() throws Exception { /* The getType() is a hex 0xXXXX value agreed between peers --- this is the key (in my case) to multiple connections in the "Normal" way */ String uuid = getType() + "1101-0000-1000-8000-00805F9B34FB"; try { logDebug("Fetching BT RFcomm Socket standard for UUID: " + uuid + "..."); socket = btDevice.createRfcommSocketToServiceRecord(UUID.fromString(uuid)); return socket; } catch (Exception e) { logError(e); throw e; } } private BluetoothSocket fetchBT_Socket_Workaround() throws Exception { Method m; int connectionIndex = 1; try { logDebug("Fetching BT RFcomm Socket workaround index " + connectionIndex + "..."); m = btDevice.getClass().getMethod("createRfcommSocket", new Class[]{int.class}); socket = (BluetoothSocket) m.invoke(btDevice, connectionIndex); return socket; } catch (Exception e1) { logError(e1); throw e1; } } private void connectToSocket(BluetoothSocket socket) throws ConnectionException { try { socket.connect(); } catch (IOException e) { try { socket.close(); } catch (IOException e1) { logError("Error while closing socket", e1); } finally { socket = null; } throw new ConnectionException("Error connecting to socket with" + this, e); } } And here is the thing, while on phones which the "Normal" way doesn't work, the "Workaround" way provides a solution for a single connection. I've searched far and wide, but came up with zip. The problem with the workaround is mentioned in the last link, both connection uses the same port, which in my case, causes a block, where both of the embedded devices can actually send data, that is not been processed on the Android, while both embedded devices can receive data sent from the Android. Did anyone handle this before? There is a bit more reference here, UPDATE: Following this (that I posted earlier) I wanted to give the mPort a chance, and perhaps to see other port indices, and how other devices manage them, and I found out the the fields in the BluetoothSocket object are different while it is the same class FQN in both cases: Detils from an HTC Vivid 2.3.4, uses the "workaround" Technic: The Socket class type is: [android.bluetooth.BluetoothSocket] mSocket BluetoothSocket (id=830008629928) EADDRINUSE 98 EBADFD 77 MAX_RFCOMM_CHANNEL 30 TAG "BluetoothSocket" (id=830002722432) TYPE_L2CAP 3 TYPE_RFCOMM 1 TYPE_SCO 2 mAddress "64:9C:8E:DC:56:9A" (id=830008516328) mAuth true mClosed false mClosing AtomicBoolean (id=830007851600) mDevice BluetoothDevice (id=830007854256) mEncrypt true mInputStream BluetoothInputStream (id=830008688856) mLock ReentrantReadWriteLock (id=830008629992) mOutputStream BluetoothOutputStream (id=830008430536) **mPort 1** mSdp null mSocketData 3923880 mType 1 Detils from an LG-P925 2.2.2, uses the "normal" Technic: The Socket class type is: [android.bluetooth.BluetoothSocket] mSocket BluetoothSocket (id=830105532880) EADDRINUSE 98 EBADFD 77 MAX_RFCOMM_CHANNEL 30 TAG "BluetoothSocket" (id=830002668088) TYPE_L2CAP 3 TYPE_RFCOMM 1 TYPE_SCO 2 mAccepted false mAddress "64:9C:8E:B9:3F:77" (id=830105544600) mAuth true mClosed false mConnected ConditionVariable (id=830105533144) mDevice BluetoothDevice (id=830105349488) mEncrypt true mInputStream BluetoothInputStream (id=830105532952) mLock ReentrantReadWriteLock (id=830105532984) mOutputStream BluetoothOutputStream (id=830105532968) mPortName "" (id=830002606256) mSocketData 0 mSppPort BluetoothSppPort (id=830105533160) mType 1 mUuid ParcelUuid (id=830105714176) Anyone have some insight...

  Read the article

• Core Animation bad access on device

  - by user1595102

  I'm trying to do a frame by frame animation with CAlayers. I'm doing this with this tutorial http://mysterycoconut.com/blog/2011/01/cag1/ but everything works with disable ARC, when I'm try to rewrite code with ARC, it's works on simulator perfectly but on device I got a bad access memory. Layer Class interface #import <Foundation/Foundation.h> #import <QuartzCore/QuartzCore.h> @interface MCSpriteLayer : CALayer { unsigned int sampleIndex; } // SampleIndex needs to be > 0 @property (readwrite, nonatomic) unsigned int sampleIndex; // For use with sample rects set by the delegate + (id)layerWithImage:(CGImageRef)img; - (id)initWithImage:(CGImageRef)img; // If all samples are the same size + (id)layerWithImage:(CGImageRef)img sampleSize:(CGSize)size; - (id)initWithImage:(CGImageRef)img sampleSize:(CGSize)size; // Use this method instead of sprite.sampleIndex to obtain the index currently displayed on screen - (unsigned int)currentSampleIndex; @end Layer Class implementation @implementation MCSpriteLayer @synthesize sampleIndex; - (id)initWithImage:(CGImageRef)img; { self = [super init]; if (self != nil) { self.contents = (__bridge id)img; sampleIndex = 1; } return self; } + (id)layerWithImage:(CGImageRef)img; { MCSpriteLayer *layer = [(MCSpriteLayer*)[self alloc] initWithImage:img]; return layer ; } - (id)initWithImage:(CGImageRef)img sampleSize:(CGSize)size; { self = [self initWithImage:img]; if (self != nil) { CGSize sampleSizeNormalized = CGSizeMake(size.width/CGImageGetWidth(img), size.height/CGImageGetHeight(img)); self.bounds = CGRectMake( 0, 0, size.width, size.height ); self.contentsRect = CGRectMake( 0, 0, sampleSizeNormalized.width, sampleSizeNormalized.height ); } return self; } + (id)layerWithImage:(CGImageRef)img sampleSize:(CGSize)size; { MCSpriteLayer *layer = [[self alloc] initWithImage:img sampleSize:size]; return layer; } + (BOOL)needsDisplayForKey:(NSString *)key; { return [key isEqualToString:@"sampleIndex"]; } // contentsRect or bounds changes are not animated + (id < CAAction >)defaultActionForKey:(NSString *)aKey; { if ([aKey isEqualToString:@"contentsRect"] || [aKey isEqualToString:@"bounds"]) return (id < CAAction >)[NSNull null]; return [super defaultActionForKey:aKey]; } - (unsigned int)currentSampleIndex; { return ((MCSpriteLayer*)[self presentationLayer]).sampleIndex; } // Implement displayLayer: on the delegate to override how sample rectangles are calculated; remember to use currentSampleIndex, ignore sampleIndex == 0, and set the layer's bounds - (void)display; { if ([self.delegate respondsToSelector:@selector(displayLayer:)]) { [self.delegate displayLayer:self]; return; } unsigned int currentSampleIndex = [self currentSampleIndex]; if (!currentSampleIndex) return; CGSize sampleSize = self.contentsRect.size; self.contentsRect = CGRectMake( ((currentSampleIndex - 1) % (int)(1/sampleSize.width)) * sampleSize.width, ((currentSampleIndex - 1) / (int)(1/sampleSize.width)) * sampleSize.height, sampleSize.width, sampleSize.height ); } @end I create the layer on viewDidAppear and start animate by clicking on button, but after init I got a bad access error -(void)viewDidAppear:(BOOL)animated { [super viewDidAppear:animated]; NSString *path = [[NSBundle mainBundle] pathForResource:@"mama_default.png" ofType:nil]; CGImageRef richterImg = [UIImage imageWithContentsOfFile:path].CGImage; CGSize fixedSize = animacja.frame.size; NSLog(@"wid: %f, heigh: %f", animacja.frame.size.width, animacja.frame.size.height); NSLog(@"%f", animacja.frame.size.width); richter = [MCSpriteLayer layerWithImage:richterImg sampleSize:fixedSize]; animacja.hidden = 1; richter.position = animacja.center; [self.view.layer addSublayer:richter]; } -(IBAction)animacja:(id)sender { if ([richter animationForKey:@"sampleIndex"]) {NSLog(@"jest"); } if (! [richter animationForKey:@"sampleIndex"]) { CABasicAnimation *anim = [CABasicAnimation animationWithKeyPath:@"sampleIndex"]; anim.fromValue = [NSNumber numberWithInt:0]; anim.toValue = [NSNumber numberWithInt:22]; anim.duration = 4; anim.repeatCount = 1; [richter addAnimation:anim forKey:@"sampleIndex"]; } } Have you got any idea how to fix it? Thanks a lot.

  Read the article

• Wireless card power management

  - by penner

  I have noticed that when my computer in plugged in, the wireless strength increases. I'm assuming this is to do with power management. Is there a way to disable Wireless Power Management? I have found a few blog posts that show hacks to disable this but what is best practice here? Should there not be an option via the power menu that lets you toggle this? EDIT -- FILES AND LOGS AS REQUESTED /var/log/kern.log Jul 11 11:45:27 CoolBreeze kernel: [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532080] [fglrx] Gart USWC size:1280 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532084] [fglrx] Gart cacheable size:508 M. Jul 11 11:45:27 CoolBreeze kernel: [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 Jul 11 11:45:27 CoolBreeze kernel: [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 Jul 11 11:45:38 CoolBreeze kernel: [ 17.423743] eth1: no IPv6 routers present Jul 11 11:46:37 CoolBreeze kernel: [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) Jul 11 11:46:37 CoolBreeze kernel: [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 Jul 11 11:54:25 CoolBreeze kernel: [ 543.679614] eth1: no IPv6 routers present dmesg [ 1.411959] ACPI: Power Button [PWRB] [ 1.412046] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.412054] ACPI: Sleep Button [SLPB] [ 1.412150] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 1.412765] ACPI: Lid Switch [LID0] [ 1.412866] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.412874] ACPI: Power Button [PWRF] [ 1.412996] ACPI: Fan [FAN0] (off) [ 1.413068] ACPI: Fan [FAN1] (off) [ 1.419493] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.419498] ACPI: Thermal Zone [TZ00] (27 C) [ 1.421913] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.421918] ACPI: Thermal Zone [TZ01] (61 C) [ 1.421971] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.421986] ACPI: Battery Slot [BAT0] (battery present) [ 1.422062] ERST: Table is not found! [ 1.422067] GHES: HEST is not enabled! [ 1.422158] isapnp: Scanning for PnP cards... [ 1.422242] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.434620] ACPI: Battery Slot [BAT0] (battery present) [ 1.736355] Freeing initrd memory: 14352k freed [ 1.777846] isapnp: No Plug & Play device found [ 1.963650] Linux agpgart interface v0.103 [ 1.967148] brd: module loaded [ 1.968866] loop: module loaded [ 1.969134] ahci 0000:00:1f.2: version 3.0 [ 1.969154] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.969226] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.969277] ahci: SSS flag set, parallel bus scan disabled [ 1.969320] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x23 impl SATA mode [ 1.969329] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 1.969338] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.983340] scsi0 : ahci [ 1.983515] scsi1 : ahci [ 1.983670] scsi2 : ahci [ 1.983829] scsi3 : ahci [ 1.983985] scsi4 : ahci [ 1.984145] scsi5 : ahci [ 1.984270] ata1: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005100 irq 45 [ 1.984277] ata2: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005180 irq 45 [ 1.984282] ata3: DUMMY [ 1.984285] ata4: DUMMY [ 1.984288] ata5: DUMMY [ 1.984292] ata6: SATA max UDMA/133 abar m2048@0xf1005000 port 0xf1005380 irq 45 [ 1.985150] Fixed MDIO Bus: probed [ 1.985192] tun: Universal TUN/TAP device driver, 1.6 [ 1.985196] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.985285] PPP generic driver version 2.4.2 [ 1.985472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.985507] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.985534] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.985541] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.985626] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.985666] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.989663] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.989690] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1005800 [ 2.002183] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.002447] hub 1-0:1.0: USB hub found [ 2.002455] hub 1-0:1.0: 3 ports detected [ 2.002607] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.002633] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.002639] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 2.002737] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.002775] ehci_hcd 0000:00:1d.0: debug port 2 [ 2.006780] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 2.006806] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1005c00 [ 2.022161] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.022401] hub 2-0:1.0: USB hub found [ 2.022409] hub 2-0:1.0: 3 ports detected [ 2.022567] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.022599] uhci_hcd: USB Universal Host Controller Interface driver [ 2.022720] usbcore: registered new interface driver libusual [ 2.022813] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.035831] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.035844] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.036096] mousedev: PS/2 mouse device common for all mice [ 2.036710] rtc_cmos 00:07: RTC can wake from S4 [ 2.036881] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 2.037143] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 2.037503] device-mapper: uevent: version 1.0.3 [ 2.037656] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected] [ 2.037725] EISA: Probing bus 0 at eisa.0 [ 2.037729] EISA: Cannot allocate resource for mainboard [ 2.037734] Cannot allocate resource for EISA slot 1 [ 2.037738] Cannot allocate resource for EISA slot 2 [ 2.037741] Cannot allocate resource for EISA slot 3 [ 2.037745] Cannot allocate resource for EISA slot 4 [ 2.037749] Cannot allocate resource for EISA slot 5 [ 2.037753] Cannot allocate resource for EISA slot 6 [ 2.037756] Cannot allocate resource for EISA slot 7 [ 2.037760] Cannot allocate resource for EISA slot 8 [ 2.037764] EISA: Detected 0 cards. [ 2.037782] cpufreq-nforce2: No nForce2 chipset. [ 2.038264] cpuidle: using governor ladder [ 2.039015] cpuidle: using governor menu [ 2.039019] EFI Variables Facility v0.08 2004-May-17 [ 2.040061] TCP cubic registered [ 2.041438] NET: Registered protocol family 10 [ 2.043814] NET: Registered protocol family 17 [ 2.043823] Registering the dns_resolver key type [ 2.044290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.044336] Using IPI No-Shortcut mode [ 2.045620] PM: Hibernation image not present or could not be loaded. [ 2.045644] registered taskstats version 1 [ 2.073070] Magic number: 4:976:796 [ 2.073415] rtc_cmos 00:07: setting system clock to 2012-07-11 18:45:23 UTC (1342032323) [ 2.076654] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.076658] EDD information not available. [ 2.302111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.302587] ata1.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100 [ 2.302595] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.303143] ata1.00: configured for UDMA/100 [ 2.303453] scsi 0:0:0:0: Direct-Access ATA M4-CT128M4SSD2 000F PQ: 0 ANSI: 5 [ 2.303746] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.303920] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.304213] sd 0:0:0:0: [sda] Write Protect is off [ 2.304225] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.304471] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.306818] sda: sda1 sda2 < sda5 > [ 2.308780] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.318162] Refined TSC clocksource calibration: 1595.999 MHz. [ 2.318169] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 2.318178] Switching to clocksource tsc [ 2.450939] hub 1-1:1.0: USB hub found [ 2.451121] hub 1-1:1.0: 6 ports detected [ 2.561786] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.621757] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.636143] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-T633C, D800, max UDMA/100 [ 2.636152] ata2.00: applying bridge limits [ 2.649711] ata2.00: configured for UDMA/100 [ 2.653762] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-T633C D800 PQ: 0 ANSI: 5 [ 2.661486] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.661494] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.661890] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.662156] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.694649] hub 2-1:1.0: USB hub found [ 2.694840] hub 2-1:1.0: 8 ports detected [ 2.765823] usb 1-1.4: new high-speed USB device number 3 using ehci_hcd [ 2.981454] ata6: SATA link down (SStatus 0 SControl 300) [ 2.982597] Freeing unused kernel memory: 740k freed [ 2.983523] Write protecting the kernel text: 5816k [ 2.983808] Write protecting the kernel read-only data: 2376k [ 2.983811] NX-protecting the kernel data: 4424k [ 3.014594] udevd[127]: starting version 175 [ 3.068925] sdhci: Secure Digital Host Controller Interface driver [ 3.068932] sdhci: Copyright(c) Pierre Ossman [ 3.069714] sdhci-pci 0000:09:00.0: SDHCI controller found [1180:e822] (rev 1) [ 3.069742] sdhci-pci 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.069786] sdhci-pci 0000:09:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 3.069798] sdhci-pci 0000:09:00.0: setting latency timer to 64 [ 3.069816] mmc0: no vmmc regulator found [ 3.069877] Registered led device: mmc0:: [ 3.070946] mmc0: SDHCI controller on PCI [0000:09:00.0] using DMA [ 3.071078] tg3.c:v3.121 (November 2, 2011) [ 3.071252] tg3 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.071269] tg3 0000:0b:00.0: setting latency timer to 64 [ 3.071403] firewire_ohci 0000:09:00.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 3.071417] firewire_ohci 0000:09:00.3: setting latency timer to 64 [ 3.078509] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 3.078517] EXT4-fs (sda1): write access will be enabled during recovery [ 3.110417] tg3 0000:0b:00.0: eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address b8:ac:6f:71:02:a6 [ 3.110425] tg3 0000:0b:00.0: eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 3.110431] tg3 0000:0b:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.110436] tg3 0000:0b:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.125492] firewire_ohci: Added fw-ohci device 0000:09:00.3, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 [ 3.390124] EXT4-fs (sda1): orphan cleanup on readonly fs [ 3.390135] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078710 [ 3.390232] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363071 [ 3.390327] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078711 [ 3.390350] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078709 [ 3.390367] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078708 [ 3.390384] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078707 [ 3.390401] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078706 [ 3.390417] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078705 [ 3.390435] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078551 [ 3.390452] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078523 [ 3.390470] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7078520 [ 3.390487] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 7077901 [ 3.390551] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063272 [ 3.390562] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063266 [ 3.390572] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063261 [ 3.390582] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063256 [ 3.390592] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4063255 [ 3.390602] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2363072 [ 3.390620] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2360050 [ 3.390698] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 5250064 [ 3.390710] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365394 [ 3.390728] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2365390 [ 3.390745] EXT4-fs (sda1): 22 orphan inodes deleted [ 3.390748] EXT4-fs (sda1): recovery complete [ 3.397636] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.624910] firewire_core: created device fw0: GUID 464fc000110e2661, S400 [ 3.927467] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.929965] udevd[400]: starting version 175 [ 3.933581] Adding 6278140k swap on /dev/sda5. Priority:-1 extents:1 across:6278140k SS [ 3.945183] lp: driver loaded but no devices found [ 3.999389] wmi: Mapper loaded [ 4.016696] ite_cir: Auto-detected model: ITE8708 CIR transceiver [ 4.016702] ite_cir: Using model: ITE8708 CIR transceiver [ 4.016706] ite_cir: TX-capable: 1 [ 4.016710] ite_cir: Sample period (ns): 8680 [ 4.016713] ite_cir: TX carrier frequency (Hz): 38000 [ 4.016716] ite_cir: TX duty cycle (%): 33 [ 4.016719] ite_cir: RX low carrier frequency (Hz): 0 [ 4.016722] ite_cir: RX high carrier frequency (Hz): 0 [ 4.025684] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 4.025691] Disabling lock debugging due to kernel taint [ 4.027410] IR NEC protocol handler initialized [ 4.030250] lib80211: common routines for IEEE802.11 drivers [ 4.030257] lib80211_crypt: registered algorithm 'NULL' [ 4.036024] IR RC5(x) protocol handler initialized [ 4.036092] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.036188] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 4.036307] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 4.036361] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 4.039006] acpi device:03: registered as cooling_device10 [ 4.039164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 4.039261] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 4.049753] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 4.050201] wl 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.050215] wl 0000:05:00.0: setting latency timer to 64 [ 4.052252] Registered IR keymap rc-rc6-mce [ 4.052432] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input6 [ 4.054614] IR RC6 protocol handler initialized [ 4.054787] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0 [ 4.054839] ite_cir: driver has been successfully loaded [ 4.057338] IR JVC protocol handler initialized [ 4.061553] IR Sony protocol handler initialized [ 4.066578] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input7 [ 4.066724] IR MCE Keyboard/mouse protocol handler initialized [ 4.072580] lirc_dev: IR Remote Control driver registered, major 250 [ 4.073280] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0 [ 4.073286] IR LIRC bridge handler initialized [ 4.077849] Linux video capture interface: v2.00 [ 4.079402] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:640f) [ 4.085492] EDAC MC: Ver: 2.1.0 [ 4.087138] lib80211_crypt: registered algorithm 'TKIP' [ 4.091027] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.091733] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.091826] snd_hda_intel 0000:02:00.1: irq 47 for MSI/MSI-X [ 4.091861] snd_hda_intel 0000:02:00.1: setting latency timer to 64 [ 4.093115] EDAC i7core: Device not found: dev 00.0 PCI ID 8086:2c50 [ 4.112448] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 4.112612] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9 [ 4.113311] type=1400 audit(1342032325.540:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=658 comm="apparmor_parser" [ 4.114501] type=1400 audit(1342032325.540:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=658 comm="apparmor_parser" [ 4.115253] type=1400 audit(1342032325.540:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=658 comm="apparmor_parser" [ 4.121870] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10 [ 4.122096] usbcore: registered new interface driver uvcvideo [ 4.122100] USB Video Class driver (1.1.1) [ 4.128729] [fglrx] Maximum main memory to use for locked dma buffers: 5840 MBytes. [ 4.129678] [fglrx] vendor: 1002 device: 68c0 count: 1 [ 4.131991] [fglrx] ioport: bar 4, base 0x2000, size: 0x100 [ 4.132015] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.132024] pci 0000:02:00.0: setting latency timer to 64 [ 4.133712] [fglrx] Kernel PAT support is enabled [ 4.133747] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 4.162666] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38 [ 4.184133] device-mapper: multipath: version 1.3.0 loaded [ 4.196660] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 4.279897] input: Dell WMI hotkeys as /devices/virtual/input/input11 [ 4.292402] Bluetooth: Core ver 2.16 [ 4.292449] NET: Registered protocol family 31 [ 4.292454] Bluetooth: HCI device and connection manager initialized [ 4.292459] Bluetooth: HCI socket layer initialized [ 4.292463] Bluetooth: L2CAP socket layer initialized [ 4.292473] Bluetooth: SCO socket layer initialized [ 4.296333] Bluetooth: RFCOMM TTY layer initialized [ 4.296342] Bluetooth: RFCOMM socket layer initialized [ 4.296345] Bluetooth: RFCOMM ver 1.11 [ 4.313586] ppdev: user-space parallel port driver [ 4.316619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.316625] Bluetooth: BNEP filters: protocol multicast [ 4.383980] type=1400 audit(1342032325.812:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=938 comm="apparmor_parser" [ 4.385173] type=1400 audit(1342032325.812:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=938 comm="apparmor_parser" [ 4.425757] init: failsafe main process (898) killed by TERM signal [ 4.477052] type=1400 audit(1342032325.904:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1011 comm="apparmor_parser" [ 4.477592] type=1400 audit(1342032325.904:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 4.478099] type=1400 audit(1342032325.904:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1017 comm="apparmor_parser" [ 4.479233] type=1400 audit(1342032325.904:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 4.510060] vesafb: mode is 1152x864x32, linelength=4608, pages=0 [ 4.510065] vesafb: scrolling: redraw [ 4.510071] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.510084] mtrr: no more MTRRs available [ 4.513081] vesafb: framebuffer at 0xd0000000, mapped to 0xf9400000, using 3904k, total 3904k [ 4.515203] Console: switching to colour frame buffer device 144x54 [ 4.515278] fb0: VESA VGA frame buffer device [ 4.590743] tg3 0000:0b:00.0: irq 48 for MSI/MSI-X [ 4.702009] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.704409] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.978379] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 5.030104] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12 [ 5.045782] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 5.519573] [fglrx] ATIF platform detected with notification ID: 0x81 [ 6.391466] fglrx_pci 0000:02:00.0: irq 49 for MSI/MSI-X [ 6.393137] [fglrx] Firegl kernel thread PID: 1305 [ 6.393306] [fglrx] Firegl kernel thread PID: 1306 [ 6.393472] [fglrx] Firegl kernel thread PID: 1307 [ 6.393726] [fglrx] IRQ 49 Enabled [ 6.528052] postgres (1308): /proc/1308/oom_adj is deprecated, please use /proc/1308/oom_score_adj instead. [ 6.532080] [fglrx] Gart USWC size:1280 M. [ 6.532084] [fglrx] Gart cacheable size:508 M. [ 6.532091] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 6.532094] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 [ 6.532098] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 [ 17.423743] eth1: no IPv6 routers present [ 75.836426] warning: `proftpd' uses 32-bit capabilities (legacy support in use) [ 75.884215] init: plymouth-stop pre-start process (2922) terminated with status 1 [ 543.679614] eth1: no IPv6 routers present lsmod Module Size Used by kvm_intel 127560 0 kvm 359456 1 kvm_intel joydev 17393 0 vesafb 13516 1 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 rfcomm 38139 0 bluetooth 158438 10 bnep,rfcomm dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi binfmt_misc 17292 1 dell_laptop 17767 0 dcdbas 14098 1 dell_laptop dm_multipath 22710 0 fglrx 2909855 143 snd_hda_codec_hdmi 31775 1 psmouse 72919 0 serio_raw 13027 0 i7core_edac 23382 0 lib80211_crypt_tkip 17275 0 edac_core 46858 1 i7core_edac uvcvideo 67203 0 snd_hda_codec_idt 60251 1 videodev 86588 1 uvcvideo ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec ir_mce_kbd_decoder 12681 0 snd_seq_midi 13132 0 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 snd_rawmidi 25424 1 snd_seq_midi ir_rc6_decoder 12459 0 wl 2646601 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event ir_rc5_decoder 12459 0 video 19068 0 snd_hda_intel 32765 5 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel rc_rc6_mce 12454 0 lib80211 14040 2 lib80211_crypt_tkip,wl snd_hwdep 13276 1 snd_hda_codec ir_nec_decoder 12459 0 snd_pcm 80845 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec ite_cir 24743 0 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_rc6_mce,ir_nec_decoder,ite_cir snd_timer 28931 2 snd_seq,snd_pcm wmi 18744 1 dell_wmi snd 62064 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_rawmidi,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer mac_hid 13077 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm coretemp 13269 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp tg3 141369 0 firewire_ohci 40172 0 sdhci_pci 18324 0 firewire_core 56906 1 firewire_ohci sdhci 28241 1 sdhci_pci crc_itu_t 12627 1 firewire_core lshw *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:a9:54:31 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.117 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0900000-f0903fff *-network description: Ethernet interface product: NetLink BCM5784M Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 logical name: eth0 version: 10 serial: b8:ac:6f:71:02:a6 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb v2.19 latency=0 link=no multicast=yes port=twisted pair resources: irq:48 memory:f0d00000-f0d0ffff

  Read the article

• How do i mount my SD Card? I am using ubuntu 10.04

  - by shobhit

  root@shobhit:/media# lsusb Bus 002 Device 017: ID 14cd:125c Super Top Bus 002 Device 003: ID 0c45:6421 Microdia Bus 002 Device 002: ID 8087:0020 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 011: ID 413c:8160 Dell Computer Corp. Bus 001 Device 006: ID 413c:8162 Dell Computer Corp. Bus 001 Device 005: ID 413c:8161 Dell Computer Corp. Bus 001 Device 004: ID 138a:0008 DigitalPersona, Inc Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 002: ID 8087:0020 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub root@shobhit:/home/shobhit/scripts/internalUtilities# sudo lspci -v -nn 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fbc08000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at fbc07000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6) (prog-if 01) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=20, subordinate=20, sec-latency=32 Capabilities: [50] Subsystem: Dell Device [1028:0441] 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b0b] (rev 06) Subsystem: Dell Device [1028:0441] Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 06) (prog-if 01) Subsystem: Dell Device [1028:0441] Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 29 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at fbc06000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA <?> Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) Subsystem: Dell Device [1028:0441] Flags: medium devsel, IRQ 3 Memory at fbc05000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06) Subsystem: Dell Device [1028:0441] Flags: bus master, fast devsel, latency 0, IRQ 3 Memory at fbc04000 (64-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 3 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- 12:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4727] (rev 01) Subsystem: Dell Device [1028:0010] Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fbb00000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information <?> Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [13c] Virtual Channel <?> Capabilities: [160] Device Serial Number cb-c0-8b-ff-ff-38-00-00 Capabilities: [16c] Power Budgeting <?> Kernel driver in use: wl Kernel modules: wl 13:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: Dell Device [1028:0441] Flags: bus master, fast devsel, latency 0, IRQ 28 I/O ports at e000 [size=256] Memory at d0b04000 (64-bit, prefetchable) [size=4K] Memory at d0b00000 (64-bit, prefetchable) [size=16K] Expansion ROM at fba00000 [disabled] [size=128K] Capabilities: [40] Power Management version 3 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [ac] MSI-X: Enable- Mask- TabSize=4 Capabilities: [cc] Vital Product Data <?> Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Virtual Channel <?> Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-00-03 Kernel driver in use: r8169 Kernel modules: r8169 root@shobhit:/home/shobhit/scripts/internalUtilities# sudo lshw shobhit description: Portable Computer product: Vostro 3500 vendor: Dell Inc. version: A10 serial: FV1L3N1 width: 32 bits capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp configuration: boot=normal chassis=portable cpus=2 uuid=44454C4C-5600-1031-804C-C6C04F334E31 *-core description: Motherboard product: 0G2R51 vendor: Dell Inc. physical id: 0 version: A10 serial: .FV1L3N1.CN7016612H00PW. slot: To Be Filled By O.E.M. *-cpu:0 description: CPU product: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.5.5 serial: 0002-0655-0000-0000-0000-0000 slot: CPU 1 size: 1197MHz capacity: 2926MHz width: 64 bits clock: 533MHz capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida arat tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: id=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 3MiB capacity: 3MiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 4.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 4.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 4.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 4.4 width: 64 bits capabilities: logical *-logicalcpu:4 description: Logical CPU physical id: 4.5 width: 64 bits capabilities: logical *-logicalcpu:5 description: Logical CPU physical id: 4.6 width: 64 bits capabilities: logical *-logicalcpu:6 description: Logical CPU physical id: 4.7 width: 64 bits capabilities: logical *-logicalcpu:7 description: Logical CPU physical id: 4.8 width: 64 bits capabilities: logical *-logicalcpu:8 description: Logical CPU physical id: 4.9 width: 64 bits capabilities: logical *-logicalcpu:9 description: Logical CPU physical id: 4.a width: 64 bits capabilities: logical *-logicalcpu:10 description: Logical CPU physical id: 4.b width: 64 bits capabilities: logical *-logicalcpu:11 description: Logical CPU physical id: 4.c width: 64 bits capabilities: logical *-logicalcpu:12 description: Logical CPU physical id: 4.d width: 64 bits capabilities: logical *-logicalcpu:13 description: Logical CPU physical id: 4.e width: 64 bits capabilities: logical *-logicalcpu:14 description: Logical CPU physical id: 4.f width: 64 bits capabilities: logical *-logicalcpu:15 description: Logical CPU physical id: 4.10 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 1d slot: System board or motherboard size: 3GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: HMT112S6TFR8C-H9 vendor: AD80 physical id: 0 serial: 5525C935 slot: DIMM_A size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: HMT125S6TFR8C-H9 vendor: AD80 physical id: 1 serial: 3441D6CA slot: DIMM_B size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A10 (10/25/2010) size: 64KiB capacity: 1984KiB capabilities: mca pci upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb zipboot biosbootspecification *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.5.5 serial: 0002-0655-0000-0000-0000-0000 size: 1197MHz capacity: 1197MHz capabilities: vmx ht cpufreq configuration: id=4 *-logicalcpu:0 description: Logical CPU physical id: 4.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 4.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 4.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 4.4 capabilities: logical *-logicalcpu:4 description: Logical CPU physical id: 4.5 capabilities: logical *-logicalcpu:5 description: Logical CPU physical id: 4.6 capabilities: logical *-logicalcpu:6 description: Logical CPU physical id: 4.7 capabilities: logical *-logicalcpu:7 description: Logical CPU physical id: 4.8 capabilities: logical *-logicalcpu:8 description: Logical CPU physical id: 4.9 capabilities: logical *-logicalcpu:9 description: Logical CPU physical id: 4.a capabilities: logical *-logicalcpu:10 description: Logical CPU physical id: 4.b capabilities: logical *-logicalcpu:11 description: Logical CPU physical id: 4.c capabilities: logical *-logicalcpu:12 description: Logical CPU physical id: 4.d capabilities: logical *-logicalcpu:13 description: Logical CPU physical id: 4.e capabilities: logical *-logicalcpu:14 description: Logical CPU physical id: 4.f capabilities: logical *-logicalcpu:15 description: Logical CPU physical id: 4.10 capabilities: logical *-pci description: Host bridge product: Core Processor DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 18 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 18 width: 64 bits clock: 33MHz capabilities: msi pm bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:30 memory:fac00000-faffffff memory:c0000000-cfffffff(prefetchable) ioport:f080(size=8) *-communication UNCLAIMED description: Communication controller product: 5 Series/3400 Series Chipset HECI Controller vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: latency=0 resources: memory:fbc09000-fbc0900f *-usb:0 description: USB Controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 06 width: 32 bits clock: 33MHz capabilities: pm debug bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:fbc08000-fbc083ff *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:22 memory:fbc00000-fbc03fff *-pci:0 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:24 ioport:2000(size=4096) memory:bc000000-bc1fffff memory:bc200000-bc3fffff(prefetchable) *-pci:1 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:25 ioport:3000(size=4096) memory:fbb00000-fbbfffff memory:bc400000-bc5fffff(prefetchable) *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:8b:aa:d8 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=10.0.1.50 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbb00000-fbb03fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 3 vendor: Intel Corporation physical id: 1c.2 bus info: pci@0000:00:1c.2 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:26 ioport:e000(size=4096) memory:fba00000-fbafffff ioport:d0b00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 03 serial: 78:2b:cb:cc:0e:2a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:28 ioport:e000(size=256) memory:d0b04000-d0b04fff(prefetchable) memory:d0b00000-d0b03fff(prefetchable) memory:fba00000-fba1ffff(prefetchable) *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 5 vendor: Intel Corporation physical id: 1c.4 bus info: pci@0000:00:1c.4 version: 06 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm bus_master cap_list configuration: driver=pcieport resources: irq:27 ioport:d000(size=4096) memory:fb000000-fb9fffff ioport:d0000000(size=10485760) *-usb:1 description: USB Controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 06 width: 32 bits clock: 33MHz capabilities: pm debug bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fbc07000-fbc073ff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a6 width: 32 bits clock: 33MHz capabilities: pci bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 06 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 5 Series/3400 Series Chipset 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 06 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:29 ioport:f070(size=8) ioport:f060(size=4) ioport:f050(size=8) ioport:f040(size=4) ioport:f020(size=32) memory:fbc06000-fbc067ff *-disk description: ATA Disk product: WDC WD3200BEKT-7 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21AC0W1945 size: 298GiB (320GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=77e3ed41 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: aa69-51c0 size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2012-04-03 02:00:15 filesystem=ntfs label=System Reserved state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 9854ff5c-1dea-a147-84a6-624e758f44b8 size: 48GiB capacity: 48GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2012-04-10 13:55:31 filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-volume:2 description: Extended partition physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 size: 48GiB capacity: 48GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 1952MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,barrier=1,data=ordered state=mounted *-volume:3 description: Windows NTFS volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 logical name: /media/56AA8094AA807273 version: 3.1 serial: 22a29e8d-56c7-9a4a-adea-528103948f6d size: 200GiB capacity: 200GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2012-04-02 20:17:15 filesystem=ntfs modified_by_chkdsk=true mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 mounted_on_nt4=true resize_log_file=true state=mounted upgrade_on_mount=true *-cdrom description: DVD-RAM writer product: DVD+-RW TS-L633J vendor: TSSTcorp physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: D200 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 06 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:fbc05000-fbc050ff ioport:f000(size=32) *-generic UNCLAIMED description: Signal processing controller product: 5 Series/3400 Series Chipset Thermal Subsystem vendor: Intel Corporation physical id: 1f.6 bus info: pci@0000:00:1f.6 version: 06 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: latency=0 resources: memory:fbc04000-fbc04fff *-scsi physical id: 2 bus info: usb@2:1.1 logical name: scsi15 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@15:0.0.0 logical name: /dev/sdb I have tried all options like fdisk /dev/sdb , pmount /dev/sdb but nothing is working .Pls guide me

  Read the article

• Try out Windows Phone 7 on your PC today

  - by Matthew Guay

  Anticipation has been building for the new Windows Phone 7 Series ever since Microsoft unveiled it at the Mobile World Congress in February.  Now, thanks to free developer tools, you can get a first-hand experience of the basic Windows Phone 7 Series devices on your PC. Windows Phone 7 Series represents a huge change in the mobile field for Microsoft, bringing the acclaimed Zune HD UI to an innovative phone platform.  Windows Mobile has often been criticized for being behind other Smartphone platforms, but Microsoft seeks to regain the lead with this new upcoming release.  A platform must have developers behind it to be useful, so they have released a full set of free development tools so anyone can make apps for it today.  Or, if you simply want to play with Windows Phone 7, you can use the included emulator to try out the new Metro UI.  Here’s how to do this today on your Vista or 7 computer. Please note: These tools are a Customer Technology Preview release, so only install them if you’re comfortable using pre-release software. Getting Started First, download the Windows Phone Developer Tools CTP (link below), and run the installer.  This will install the Customer Technology Preview (CTP) versions of Visual Studio 2010 Express for Windows Phone, Windows Phone Emulator, Silverlight for Windows Phone, and XNA 4.0 Game Studio on your computer, all of which are required and cannot be installed individually. Accept the license agreement when prompted. Click “Install Now” to install the tools you need.  The only setup customization option is where to save the files, so choose Customize if you need to do so. Setup will now automatically download and install the components you need, and will additionally download either 32 or 64 bit programs depending on your operating system. About halfway thorough the installation, you’ll be prompted to reboot your system.  Once your computer is rebooted, setup will automatically resume without further input.   When setup is finished, click “Run the Product Now” to get started. Running Windows Phone 7 on your PC Now that you’ve got the Windows Phone Developer tools installed, it’s time to get the Windows Phone emulator running.  If you clicked “Run the Product Now” when the setup finished, Visual Studio 2010 Express for Windows Phone should have already started.   If not, simply enter “visual studio” in your start menu search and select “Microsoft Visual Studio 2010 Express for Windows Phone”. Now, to run the Windows Phone 7 emulator, we have to test an application.  So, even if you don’t know how to program, we can open a phone application template, and then test it to run the emulator.  First, click New Project on the left hand side of the front page. Any of the application templates would work for this, but here let’s select “Windows Phone Application”, and then click Ok. Here’s your new application template, which already contains the basic phone application framework.  This is where you’d start if you want to develop a Windows Phone app, but for now we just want to see Windows Phone 7 in action. So, to run the emulator, click Debug in the menu and then select Start Debugging. Your new application will launch inside the Windows Phone 7 Series emulator.  The default template doesn’t give us much, but it does show an example application running in Windows Phone 7.   Exploring Windows Phone 7 Click the Windows button on the emulator to go to the home screen.  Notice the Zune HD-like transition animation.  The emulator only includes Internet Explorer, your test application, and a few settings. Click the arrow on the right to see the available applications in a list. Settings lets you change the theme, regional settings, and the date and time in your emulator.  It also has an applications settings pane, but this currently isn’t populated. The Time settings shows a unique Windows Phone UI. You can return to the home screen by pressing the Windows button.  Here’s the Internet Explorer app running, with the virtual keyboard open to enter an address.  Please note that this emulator can also accept input from your keyboard, so you can enter addresses without clicking on the virtual keyboard. And here’s Google running in Internet Explorer on Windows Phone 7. Windows Phone 7 supports accelerometers, and you can simulate this in the emulator.  Click one of the rotate buttons to rotate the screen in that direction. Here’s our favorite website in Internet Explorer on Windows Phone 7 in landscape mode. All this, running right inside your Windows 7 desktop… Developer tools for Windows Phone 7 Although it may be fun to play with the Windows Phone 7 emulator, developers will be more excited to actually be able to create new and exciting apps for it.  The Windows Phone Developer Tools download includes Visual Studio Express and XNA Game Studio 4.0 which lets you create enticing games and apps for Windows Phones.  All development for Windows Phones will be in C#, Silverlight, and the XNA game framework.  Visual Studio Express for Windows Phone includes templates for these, and additionally has code samples to help you get started with development. Conclusion Many features are still not functional in this preview version, such as the search button and most of the included applications.  However, this still gives you a great way to experience firsthand the future of the Windows Phone platform.  And, for developers, this is your chance to set your mark on the Windows Phone 7 Series even before it is released to the public.  Happy playing and developing! Links Download Windows Phone Developer Tools CTP Windows Phone Developer Site Similar Articles Productive Geek Tips Keep Track of Homework Assignments with SoshikuWeekend Fun: Watch Television On Your PC With TVUPlayerEasily Manage Your Downloads with Download StatusbarCreate a Shortcut or Hotkey to Mute the System Volume in WindowsHow-To Geek on Lifehacker: How to Make Windows Vista Less Annoying TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family

  Read the article

• La nueva version de Enterprise Manager 12c, Release 4!

  - by grantunez-Oracle

  El día 3 de Junio del 2014 se anuncio la nueva versión de Enterprise Manager, y en esta versión hay nuevas funcionalidades que realmente hace que uno se apasione por este producto. Aquí no voy a platicar de todas las nuevas características, pero si de unas cuantas que son las de mas interés para la Base de Datos. Gestión Avanzada de Umbrales (Advanced Threshold Management) Esta funcionalidad  lo que permite es tener una mayor flexibilidad en los umbrales de todos tus objetivos (Targets) Umbrales basados en tiempo: Auto ajusta los umbrales estáticos, basados ??en los cambios de carga de trabajo de tu ambiente de trabajo. Por ejemplo, no son las mismas cargas de trabajo que tiene tu ambiente los fines de semana a comparación en un cierre de mes. Umbrales adaptativos: Umbrales que se calculan automáticamente para alertar si tu objetivo, ya sea una BD o un Exadata  se desvía del comportamiento esperado de su ambiente normal de trabajo. Interfaz para el seguimiento de tus tareas programadas Anteriormente si tenias varias tareas programadas, tenias que entrar a cada uno de tus targets para verificar como iba progresando, ahora en esta nueva versión, existe una nueva interfaz en la que te podrá permitir ver todas las tareas programadas que tienes en tu ambiente, reduciendo el numero de clicks para poder llegar a esta. De igual manera, se introduce la capacidad de poder exportar e importar tus tareas programadas a través de emcli emcli export_jobs  emcli import_jobs   Almacén de AWR (AWR Warehouse) En esta nueva versión se introdujo un almacén de los snapshots de AWR, este almacén o repositorio por default tiene una retención infinita, significando, que nunca va a borrar los snapshots de AWR.  Este repositorio puede ser una BD en  11.2.0.4 + el ultimo PSU o una version mas nueva. Las siguientes caracteristicas de AWR van a encontrarse en este repositorio Pagina de Performance Reporte AWR ASH Analytics Comparar un periodo de ADDM Comparar un un periodo de tiempo  In-Memory Store Central  Enterprise Manager 12.1.0.4 viene listo para la nueva version de la base de datos 12c, en donde vamos a poder ver un heat-map de los objetos que se encuentran en el "memory-store". Aquí, vamos a poder ver la compresión que se efectúa sobre los segmentos "en-memoria". De la misma manera vamos a tener un tutor o advisor, que nos va a poder guiar en nuestro proceso de decisión para ver que segmentos podemos definir en nuestra "in-memory store" . Mas Información Enterprise Manager  Enterprise Manager Cloud Control Documentation

  Read the article

• NEC Corporation uPD720200 USB 3.0 controller doesn't run at full speed

  - by Radek Zyskowski

  I have fresh install of Ubuntu 10.10. I have external HD on USB 3.0. Trying to connect this via PCI Express NEC controller. dmesg: [ 8966.820078] usb 6-3: new high speed USB device using xhci_hcd and address 0 [ 8966.839831] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.840580] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.841329] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.842079] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.843343] scsi8 : usb-storage 6-3:1.0 [ 8967.847144] scsi 8:0:0:0: Direct-Access SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 [ 8967.847589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 8967.847923] sd 8:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8967.848341] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.850959] sd 8:0:0:0: [sdb] Write Protect is off [ 8967.850963] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 8967.850966] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.851818] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.852365] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.852370] sdb: sdb1 [ 8967.871315] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.871853] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.871856] sd 8:0:0:0: [sdb] Attached SCSI disk [ 8967.950728] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.951355] sd 8:0:0:0: [sdb] Sense Key : Recovered Error [current] [descriptor] [ 8967.951361] Descriptor sense data with sense descriptors (in hex): [ 8967.951363] 72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00 [ 8967.951375] 00 00 00 00 00 50 [ 8967.951380] sd 8:0:0:0: [sdb] ASC=0x4 ASCQ=0x1d [ 8968.790076] xhci_hcd 0000:02:00.0: HC died; cleaning up [ 8968.790076] usb 6-3: USB disconnect, address 2 [ 8999.008554] scsi 8:0:0:0: [sdb] Unhandled error code [ 8999.008558] scsi 8:0:0:0: [sdb] Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK [ 8999.008562] scsi 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 97 39 00 00 3e 00 [ 8999.008573] end_request: I/O error, dev sdb, sector 1953535801 [ 8999.008578] Buffer I/O error on device sdb1, logical block 1953535738 [ 8999.008582] Buffer I/O error on device sdb1, logical block 1953535739 [ 8999.008585] Buffer I/O error on device sdb1, logical block 1953535740 [ 8999.008589] Buffer I/O error on device sdb1, logical block 1953535741 [ 8999.008592] Buffer I/O error on device sdb1, logical block 1953535742 [ 8999.008595] Buffer I/O error on device sdb1, logical block 1953535743 [ 8999.008600] Buffer I/O error on device sdb1, logical block 1953535744 [ 8999.008603] Buffer I/O error on device sdb1, logical block 1953535745 [ 8999.008606] Buffer I/O error on device sdb1, logical block 1953535746 [ 8999.008609] Buffer I/O error on device sdb1, logical block 1953535747 [ 8999.008642] scsi 8:0:0:0: rejecting I/O to offline device [ 8999.008747] scsi 8:0:0:0: [sdb] Unhandled error code [ 8999.008749] scsi 8:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 8999.008752] scsi 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 97 77 00 00 3e 00 [ 8999.008760] end_request: I/O error, dev sdb, sector 1953535863 sudo lspci -v 2:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Physical Slot: 32 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fe9fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd If I try to put into this controller any USB 2.0, it works fine. But USB 3.0 nope. Any idea?

  Read the article

• Ubuntu 11.10 doesn't detect external usb hard drive

  - by Andrew

  I have been batting with this issue for a bit and cannot find the answer to it. So the Dmesg see's the device, being Symwave WDC WD64.... media@Media-pc:~$ dmesg | tail -n 20 [78678.719497] scsi 10:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 0 CCS [78678.725621] scsi 10:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 0 CCS [78684.073837] scsi 11:0:0:0: Direct-Access SYMWAVE WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 4 [78691.008126] scsi 11:0:0:0: uas_eh_abort_handler tag 0 [78691.008139] scsi 11:0:0:0: uas_eh_device_reset_handler tag 0 [78691.008147] scsi 11:0:0:0: uas_eh_target_reset_handler tag 0 [78691.008154] scsi 11:0:0:0: uas_eh_bus_reset_handler tag 0 [78691.080307] usb 2-2.4: reset high speed USB device number 9 using ehci_hcd [78691.221427] scsi 11:0:0:0: Device offlined - not ready after error recovery [78691.221498] scsi 11:0:0:0: rejecting I/O to offline device [78691.221519] scsi 11:0:0:0: rejecting I/O to offline device [78691.222952] scsi 11:0:0:1: Enclosure SYMWAVE SES 3B01 PQ: 0 ANSI: 4 [78691.223156] scsi 11:0:0:2: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [78691.225061] sd 11:0:0:0: Attached scsi generic sg3 type 0 [78691.225344] ses 11:0:0:1: Attached Enclosure device [78691.225495] ses 11:0:0:1: Attached scsi generic sg4 type 13 [78691.226266] sd 10:0:0:0: Attached scsi generic sg5 type 0 [78691.226653] sd 10:0:0:1: Attached scsi generic sg6 type 0 [78691.241647] sd 10:0:0:0: [sdd] Attached SCSI removable disk [78691.243832] sd 10:0:0:1: [sde] Attached SCSI removable disk It looks like it attaches sdd and sde. Now when i look in the disk utility it shows "Hard disk Symwave WD6400AAKS-0 device /dev/sdc doesn't show any other info then that, if i format, it says that it cannot open /dev/sdc no device or address error. Underneeth the device it does show two general usb3.0 CRW that are sdd and sde. Now if I do a fdisk -l it doesn't show the device: media@Media-pc:~$ sudo fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000247de Device Boot Start End Blocks Id System /dev/sda1 * 2048 152176639 76087296 83 Linux /dev/sda2 152178686 156301311 2061313 5 Extended /dev/sda5 152178688 156301311 2061312 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x948fc822 Device Boot Start End Blocks Id System /dev/sdb1 63 1953520064 976760001 7 HPFS/NTFS/exFAT So now I am confused. Any ideas how I get fdisk to see the device?

  Read the article

• What to do when opensource project starts to tear apart? (or a manager tries to write code and than shouts at the team)

  - by Kabumbus

  Imagine there is an open source cross-platform project on Google code. It has lots of revisions (1000). It concentrates in itself lots technological stuff - rare stuff - it mixes top tech. It contains server, and more than one client. The project was created by a well-connected team of developers (friends) and a manager that was sponsoring project at its start up during its first few months (project now is more than a year old-sponsoring oss project is a big good deal- also gave the idea of project to developers). The project was growing in complexity and effort reqiered to continue development. Once upon a time a manager - team leader started trying to write code (he was a programmer in some other projects - not the best, but he felt like he was one). He started because one of the developers suggested an idea at the team meeting and he felt he just needed to do it on his own. He failed, and he told the dev team about it. The dev team did what he failed to do in a few days. After that, the manager feels that team codes with out him perfectly and gets the job done in short time. He felt sorry and lost and he started to crash like an old bad PC. Firstly, he started to scream (in forms of messages not in voice) he tried to tell developers that what they were doing was a bad, not-needed thing - developers kindly told him that his "beginnings" were not compilable while dev team product worked as needed. He told the developers that all work they do should be firstly discussed with him. Here is the part where we need to mention that all team members are "project owners" and logically have equal rights. The team leader suggested to the developers these options: change their dev process to go through him, or be moved from project owners to contributers. So what are our options as developers? What arguments we can provide to the team leader/manager for him to calm down? Is it possible to save the project or is it better to fork out now? An important issue is that lately we had no active ticket system, and I personally think that this was the reason the mess appeared. So... any ideas?

  Read the article

• Ubuntu 12.10 graphics does not work properly

  - by madox2

  My graphic on ubuntu 12.10 does not work as well as on 12.04. After upgrade I installed driver sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current for my Nvidia 450 GTS graphics card. But sometimes I see slight lag on my videos played in VLC player, some of desktop and window effects are lagging, sometimes I can see an indescribable souce of pixels on my screen at the start of ubuntu and so on. I feel difference between 12.04 and 12.10 in favour of former version. Does anyone know whats wrong or what I am missing? here is output of lspci -k: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Giga-byte Technology Device 1c3a Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) Subsystem: Giga-byte Technology Device 5006 Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Giga-byte Technology Device a000 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) Subsystem: Giga-byte Technology Device 5006 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05) Subsystem: Giga-byte Technology Device 5001 Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05) Subsystem: Giga-byte Technology Device b002 Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Giga-byte Technology Device 5001 Kernel modules: i2c-i801 00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05) Subsystem: Giga-byte Technology Device b002 Kernel driver in use: ata_piix 01:00.0 VGA compatible controller: NVIDIA Corporation GF116 [GeForce GTS 450] (rev a1) Subsystem: CardExpert Technology Device 0401 Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF116 High Definition Audio Controller (rev a1) Subsystem: CardExpert Technology Device 0401 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Subsystem: Giga-byte Technology Device e000 Kernel driver in use: atl1c Kernel modules: atl1c

  Read the article

• When checking to see if I could update anything, get error message crossover and cannot open update manager

  - by Heather

  I am running ubunt 11.10 only on my computer. I had it off for a few months and wanted to see if it needed any updates. When I try to click on Update Manager, I get the following error message: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Opening /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-games_ubuntu.list - ifstream::ifstream (13: Permission denied)'

  Read the article

• How can I get my HID device working in VirtualBox?

  - by Andy E

  I'm running the latest official Ubuntu build of VirtualBox (4.1.12), with Windows 8 running as the guest OS. I have a Windows app that works with a card reading HID device, but it's not detected by the guest OS at all. I've installed the USB extensions, guest additions and set my udev rules accordingly (my own linux app is able to access the device), but no joy. Does anyone know how to get this working?

  Read the article

• How can an iPhone access another non-iPhone device over wireless or bluetooth?

  - by Tai Squared

  I'm trying to figure out if an iPhone can connect to another non-iPhone device over wireless or bluetooth and have seen conflicting information. Much of what I've found was before version 3.0 of the SDK came out, when it certainly wasn't possible. Looking at questions like this mention you can't connect to an arbitrary device unless if it's part of the "Works for iPhone" device. Do I need hardware that is part of this program? Looking through the Apple documentation, it mentions connecting two iPhones, not an iPhone to another Bluetooth device. Then there are articles like this that includes this quote ...and with the newly-announced "standard support" should allow file transfer between the iPhone and a computer, as well as between nearby iPhones Other questions mention Bonjour, and the Apple documentation talk about connecting to Bonjour devices, but can an iPhone connect to any Bonjour device? Does it have to have a wifi connection, or can it use Bluetooth? Even if I could use Bluetooth to connect to another device, it won't be available on first generation iPhones and iTouches, I believe. Is that correct? I'm thinking of an iPhone application that would need to communicate with other non-iPhone devices in the area, probably using Bluetooth, but possibly a direct wireless connection. What are the possibilities and limitations of this approach? Is it not possible to have an iPhone connect to an arbitrary Bluetooth device? Does the other device have to be on a wireless Bonjour network that? I'm trying to figure out if it's even possible for this to work or if it's not worth the effort.

  Read the article

• How to draw a part of a window into a memory device context?

  - by Nell

  I'm using simple statements to keep it, er, simple: The screen goes from 0, 0 to 1000, 1000 (screen coordinates). A window goes from 100, 100 to 900, 900 (screen coordinates). I have a memory device context that goes from 0, 0 to 200, 200 (logical coordinates). I need to send a WM_PRINT message to the window. I can pass the device context to the window via WM_PRINT, but I cannot pass which part of its window it should draw into the device context. Is there some way to alter the device context that will result in the window drawing a specific part of itself into the device context (say, its bottom right portion from 700, 700 to 900, 900)? (This is all under plain old GDI and in C or C++. Any solution must be too.) Please note: This problem is part of a larger solution in which the device context size is fixed and speed is crucial, so I cannot draw the window in full into a separate device context and blit the part I want from the resultant full bitmap into my device context.

  Read the article

• MPVolumeView, avoid displaying "No Volume Available"

  - by Emil

  Hey. I have a project with a MPVolumeView in it. It is set up, and it works, the only thing is that when I mute the device, the text "No Volume Available" comes up instead of the MPVolumeView. The volumeView is initialized in the view volumeBounds, with that view's bounds. MPVolumeView *volumeView = [[[MPVolumeView alloc] initWithFrame:volumeBounds.bounds] autorelease]; [volumeBounds addSubview:volumeView]; [volumeView sizeToFit]; Thanks :)

  Read the article

• Receive message "A signed resource has been added, modified, or deleted" when trying to debug an App

  - by jessecurry

  While attempting to debug a build created using the 3.2 SDK on an iPhone device I receive the message "A signed resource has been added, modified, or deleted.". I can clean, rebuild, then install with no error, but if I try to install without cleaning the error shows. Anyone have an idea as to what might be causing this?

  Read the article

• Clock problem with FTDIchip FT2232 MPSSE mode

  - by Simi

  Hello, I'm trying to write/read to an extern device connected to a FTDIchip FT2232 MPSSE mode using SPI. I'm using the SPI function given by FTDI for Labview. I'm doing this: Open_Device - Init_Device - Write/Read - Close_Device The problem is that I don't have a clock signal on the scope when I try to read/write. Do you have a solution? Thanks

  Read the article

• how to display IBitmapImage on CDC

  - by tommyk

  What is the best way to display IBitmapImage on a device context. I am using Windows CE 6.0. void CImaginingTestView::OnDraw(CDC* pDC) { CImaginingTestDoc* pDoc = GetDocument(); ASSERT_VALID(pDoc); IBitmapImage* pBitmapImage = pDoc->GetBitmapImage(); if (pBitmapImage) { // how to draw my bitmap on a pDC ?? } }

  Read the article

• Is it possible to stop the "Beep" device on all computers in a Windows network?

  - by sharptooth

  On Windows the default behavior it to make an annoying "beep" sound every time Windows things something notable happened. The result is that when someone send a company-wide email via the MS Exchange all computers around my cubicle beep one by one. This is annoying and makes no sense. Luckily beeping can be shut off. Someone has to: open the "Device Manager", select "View - Show hidden devices", find the "Beep" device in "Non-Pug and Play Devices" node, open its properties, go to the "Driver" tab, set "startup type" to "Disabled" and click "Stop". The "Beep" device will stop and no longer produce the useless sound. This solution however requires tracking every computer and then talking to its user which is not very convenient. Device Manager doesn't allow stopping a device on another computer. I'm looking for a solution that can be deployed by the administrators team. We have a domain and the administrators even install the programs company-wide automatically. Are there any means to stop the "Beep" device an all computers in the Windows network with some remote-administration features automatically?

  Read the article

• How to exit SW quickly

  - by Yigang Wu

  I have a SW which reside in external HDD, it will run automatically when user plug external HDD, of course, the SW have to close automatically when user unplug the external HDD. I can receive the device lost message, however my SW will not be respond druing releasing all objects, if I call exit(0) directly, the SW will show a crash message. Is there any way to quickly exit SW?

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >