Search Results

Search found 10748 results on 430 pages for 'disk encryption'.

Page 106/430 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• No "Safely Remove Hardware" for USB-Connected External Hard Disk? (Windows XP)

  - by deathlock

  I have several external hard disks with different brands. Each time I connect those hard disk to my laptop (with USB), there is no option for Safely Remove Hardware / Eject. This problem only seem to occur with external hard disks, since the option is there if I connect with USB Flash Drives. Why is it happening and is there any way to enable it? What is the best method to remove an external hard disk?

  Read the article

• Why do I need to select the hard disk when my Macbook boots?

  - by Mark

  In the past week when booting my Macbook I have had to select the Macintosh Hard Disk before the boot will continue. It is the only disk to choose from and I have never had to do this before. Is also does not happen on every boot. Any ideas why this would happen?

  Read the article

• Free space on SSD (over provisioning) per disk or per partition?

  - by Horst Walter

  It is recommended to keep some percentage of an SSD free for relocation ( Is free space required on a SSD for performance? ). However, is this rule meant per partition or per disk (whole SSD)? So, if I want to keep 20% free for performance reasons, is it acceptable if one partition is 95% filled, while another is almost empty and the overall empty disk space still is 20. Or does each partition has to fulfill the rule of 20% empty space?

  Read the article

• Is there a way to snapshot a running process to disk to restore it later?

  - by Sijin

  I usually work with a lot of instances of visual studio open to different projects, I was wondering if there is a way to snapshot/hibernate a running process to disk instead of closing it so that I can open it in the same state as it was quickly. I have a ton of free disk space so wouldn't mind saving the entire process snapshot if it would save me the time in opening up the solution and waiting for the projects to load.

  Read the article

• If the size of the (accessible) RAM is limited, why isn't the hard disk?

  - by sub

  When the number of possible RAM adresses is limited by the computer architecture (32/64 bit), why isn't the size of the hard disk limited? Or is it limited? If yes, what would be the highest possible size of a hard-disk for a 32-bit computer? How are the adresses of hard-disks handled then?

  Read the article

• Unleash the Power of Cryptography on SPARC T4

  - by B.Koch

  by Rob Ludeman Oracle’s SPARC T4 systems are architected to deliver enhanced value for customer via the inclusion of many integrated features.  One of the best examples of this approach is demonstrated in the on-chip cryptographic support that delivers wire speed encryption capabilities without any impact to application performance.  The Evolution of SPARC Encryption SPARC T-Series systems have a long history of providing this capability, dating back to the release of the first T2000 systems that featured support for on-chip RSA encryption directly in the UltraSPARC T1 processor.  Successive generations have built on this approach by support for additional encryption ciphers that are tightly coupled with the Oracle Solaris 10 and Solaris 11 encryption framework.  While earlier versions of this technology were implemented using co-processors, the SPARC T4 was redesigned with new crypto instructions to eliminate some of the performance overhead associated with the former approach, resulting in much higher performance for encrypted workloads. The Superiority of the SPARC T4 Approach to Crypto As companies continue to engage in more and more e-commerce, the need to provide greater degrees of security for these transactions is more critical than ever before.  Traditional methods of securing data in transit by applications have a number of drawbacks that are addressed by the SPARC T4 cryptographic approach. 1. Performance degradation – cryptography is highly compute intensive and therefore, there is a significant cost when using other architectures without embedded crypto functionality.  This performance penalty impacts the entire system, slowing down performance of web servers (SSL), for example, and potentially bogging down the speed of other business applications.  The SPARC T4 processor enables customers to deliver high levels of security to internal and external customers while not incurring an impact to overall SLAs in their IT environment. 2. Added cost – one of the methods to avoid performance degradation is the addition of add-in cryptographic accelerator cards or external offload engines in other systems.  While these solutions provide a brute force mechanism to avoid the problem of slower system performance, it usually comes at an added cost.  Customers looking to encrypt datacenter traffic without the overhead and expenditure of extra hardware can rely on SPARC T4 systems to deliver the performance necessary without the need to purchase other hardware or add-on cards. 3. Higher complexity – the addition of cryptographic cards or leveraging load balancers to perform encryption tasks results in added complexity from a management standpoint.  With SPARC T4, encryption keys and the framework built into Solaris 10 and 11 means that administrators generally don’t need to spend extra cycles determining how to perform cryptographic functions.  In fact, many of the instructions are built-in and require no user intervention to be utilized.  For example, For OpenSSL on Solaris 11, SPARC T4 crypto is available directly with a new built-in OpenSSL 1.0 engine, called the "t4 engine."  For a deeper technical dive into the new instructions included in SPARC T4, consult Dan Anderson’s blog. Conclusion In summary, SPARC T4 systems offer customers much more value for applications than just increased performance. The integration of key virtualization technologies, embedded encryption, and a true Enterprise Operating System, Oracle Solaris, provides direct business benefits that supersedes the commodity approach to data center computing.   SPARC T4 removes the roadblocks to secure computing by offering integrated crypto accelerators that can save IT organizations in operating cost while delivering higher levels of performance and meeting objectives around compliance. For more on the SPARC T4 family of products, go to here.

  Read the article

• How to resize / enlarge / grow a non-LVM ext4 partition

  - by Mischa

  I have already searched the forums, but couldnt find a good suitable answer: I have an Ubuntu Server 10.04 as KVM Host and a guest system, that also runs 10.04. The host system uses LVM and there are three logical volumes, which are provided to the guest as virtual block devices - one for /, one for /home and one for swap. The guest had been partitioned without LVM. I have already enlarged the logical volume in the host system - the guest successfully sees the bigger virtual disk. However, this virtual disk contains one "good old" partition, which still has the old small size. The output of fdisk -l is me@produktion:/$ LC_ALL=en_US sudo fdisk -l Disk /dev/vda: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c8ce7 Device Boot Start End Blocks Id System /dev/vda1 * 1 3917 31455232 83 Linux Disk /dev/vdb: 2147 MB, 2147483648 bytes 244 heads, 47 sectors/track, 365 cylinders Units = cylinders of 11468 * 512 = 5871616 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2bf7 Device Boot Start End Blocks Id System /dev/vdb1 1 366 2095104 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(0, 43, 28) Partition 1 has different physical/logical endings: phys=(260, 243, 47) logical=(365, 136, 44) Disk /dev/vdc: 225.5 GB, 225485783040 bytes 255 heads, 63 sectors/track, 27413 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027f25 Device Boot Start End Blocks Id System /dev/vdc1 1 9138 73398272 83 Linux The output of parted print all is Model: Virtio Block Device (virtblk) Disk /dev/vda: 32.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 32.2GB 32.2GB primary ext4 boot Model: Virtio Block Device (virtblk) Disk /dev/vdb: 2147MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2146MB 2145MB primary linux-swap(v1) Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 What I want to achieve is to simply grow or resize the partition /dev/vdc1 so that it uses the whole space provided by the virtual block device /dev/vdc. The problem is, that when I try to do that with parted, it complains: (parted) select /dev/vdc Using /dev/vdc (parted) print Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 (parted) resize 1 WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Start? [1049kB]? End? [75.2GB]? 224GB Error: File system has an incompatible feature enabled. Compatible features are has_journal, dir_index, filetype, sparse_super and large_file. Use tune2fs or debugfs to remove features. So what can I do? This is a headless production system. What is a safe way to grow this partition? I CAN unmount it, though - so this is not the problem.

  Read the article

• Solaris 11.1: Encrypted Immutable Zones on (ZFS) Shared Storage

  - by darrenm

  Solaris 11 brought both ZFS encryption and the Immutable Zones feature and I've talked about the combination in the past.  Solaris 11.1 adds a fully supported method of storing zones in their own ZFS using shared storage so lets update things a little and put all three parts together. When using an iSCSI (or other supported shared storage target) for a Zone we can either let the Zones framework setup the ZFS pool or we can do it manually before hand and tell the Zones framework to use the one we made earlier.  To enable encryption we have to take the second path so that we can setup the pool with encryption before we start to install the zones on it. We start by configuring the zone and specifying an rootzpool resource: # zonecfg -z eizoss Use 'create' to begin configuring a new zone. zonecfg:eizoss> create create: Using system default template 'SYSdefault' zonecfg:eizoss> set zonepath=/zones/eizoss zonecfg:eizoss> set file-mac-profile=fixed-configuration zonecfg:eizoss> add rootzpool zonecfg:eizoss:rootzpool> add storage \ iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 zonecfg:eizoss:rootzpool> end zonecfg:eizoss> verify zonecfg:eizoss> commit zonecfg:eizoss> Now lets create the pool and specify encryption: # suriadm map \ iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 PROPERTY VALUE mapped-dev /dev/dsk/c10t600144F09ACAACD20000508E64A70001d0 # echo "zfscrypto" > /zones/p # zpool create -O encryption=on -O keysource=passphrase,file:///zones/p eizoss \ /dev/dsk/c10t600144F09ACAACD20000508E64A70001d0 # zpool export eizoss Note that the keysource example above is just for this example, realistically you should probably use an Oracle Key Manager or some other better keystorage, but that isn't the purpose of this example.  Note however that it does need to be one of file:// https:// pkcs11: and not prompt for the key location.  Also note that we exported the newly created pool.  The name we used here doesn't actually mater because it will get set properly on import anyway. So lets go ahead and do our install: zoneadm -z eizoss install -x force-zpool-import Configured zone storage resource(s) from: iscsi://zs7120-tvp540-c.uk.oracle.com/luname.naa.600144f09acaacd20000508e64a70001 Imported zone zpool: eizoss_rpool Progress being logged to /var/log/zones/zoneadm.20121029T115231Z.eizoss.install Image: Preparing at /zones/eizoss/root. AI Manifest: /tmp/manifest.xml.ujaq54 SC Profile: /usr/share/auto_install/sc_profiles/enable_sci.xml Zonename: eizoss Installation: Starting ... Creating IPS image Startup linked: 1/1 done Installing packages from: solaris origin: http://pkg.us.oracle.com/solaris/release/ Please review the licenses for the following packages post-install: consolidation/osnet/osnet-incorporation (automatically accepted, not displayed) Package licenses may be viewed using the command: pkg info --license <pkg_fmri> DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 187/187 33575/33575 227.0/227.0 384k/s PHASE ITEMS Installing new actions 47449/47449 Updating package state database Done Updating image state Done Creating fast lookup database Done Installation: Succeeded Note: Man pages can be obtained by installing pkg:/system/manual done. Done: Installation completed in 929.606 seconds. Next Steps: Boot the zone, then log into the zone console (zlogin -C) to complete the configuration process. Log saved in non-global zone as /zones/eizoss/root/var/log/zones/zoneadm.20121029T115231Z.eizoss.install That was really all we had to do, when the install is done boot it up as normal. The zone administrator has no direct access to the ZFS wrapping keys used for the encrypted pool zone is stored on.  Due to how inheritance works in ZFS he can still create new encrypted datasets that use those wrapping keys (without them ever being inside a process in the zone) or he can create encrypted datasets inside the zone that use keys of his own choosing, the output below shows the two cases: rpool is inheriting the key material from the global zone (note we can see the value of the keysource property but we don't use it inside the zone nor does that path need to be (or is) accessible inside the zone). Whereas rpool/export/home/bob has set keysource locally. # zfs get encryption,keysource rpool rpool/export/home/bob NAME PROPERTY VALUE SOURCE rpool encryption on inherited from $globalzone rpool keysource passphrase,file:///zones/p inherited from $globalzone rpool/export/home/bob encryption on local rpool/export/home/bob keysource passphrase,prompt local  

  Read the article

• 11gR2 RAC ASM????

  - by Liu Maclean(???)

  11gR2 RAC?ocr?votedisk???????ASM??, ????10g??????2?RAC????????????,  ?? 11gR2 ?ASM?spfile??????ASM diskgroup???????ASM??????? ????????????,????? ASM?????mount diskgroup??????diskgroup????, ??ASM??????ASM spfile????????,?2???????? ????T.askmaclean.com?????ASM?????: hello maclean, ??spfile??ASMCMD> spget+CRSDG/rac/asmparameterfile/registry.253.787925627?????,ASM ?????ORACLE instance,?????????????diskgroup,????????????????????????????thanks.! ?????????: ?11.2??Oracle Cluterware??voting disk files?????????11.1?10.2????,11.2??voting disk file??????OCR?, ?????11.2??ocr?votedisk?????ASM? , ???11.2?voting disk file??GPNP profile??CSS voting file discovery string???? CSS voting disk file?discovery string???ASM,??????ASM discovery string???  ????????udev???????ASM???LUN, ??udev????????/dev/rasm-disk* , ????gpnptool get????gpnp profile: [grid@maclean1 trace]$ gpnptool get Warning: some command line parameters were defaulted. Resulting command line: /g01/grid/app/11.2.0/grid/bin/gpnptool.bin get -o- <?xml version="1.0" encoding="UTF-8"?><gpnp:GPnP-Profile Version="1.0" xmlns="http://www.grid-pnp.org/2005/11/gpnp-profile" xmlns:gpnp="http://www.grid-pnp.org/2005/11/gpnp-profile" xmlns:orcl="http://www.oracle.com/gpnp/2005/11/gpnp-profile" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.grid-pnp.org/2005/11/gpnp-profile gpnp-profile.xsd" ProfileSequence="9" ClusterUId="452185be9cd14ff4ffdc7688ec5439bf" ClusterName="maclean-cluster" PALocation=""><gpnp:Network-Profile><gpnp:HostNetwork id="gen" HostName="*"><gpnp:Network id="net1" IP="192.168.1.0" Adapter="eth0" Use="public"/><gpnp:Network id="net2" IP="172.168.1.0" Adapter="eth1" Use="cluster_interconnect"/></gpnp:HostNetwork></gpnp:Network-Profile>< orcl:CSS-Profile id="css" DiscoveryString="+asm" LeaseDuration="400"/><orcl:ASM-Profile id="asm" DiscoveryString="/dev/rasm*" SPFile="+SYSTEMDG/maclean-cluster/asmparameterfile/registry.253.788682933"/>< ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#"><ds:SignedInfo><ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/><ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/><ds:Reference URI=""><ds:Transforms><ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature"/><ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"> <InclusiveNamespaces xmlns="http://www.w3.org/2001/10/xml-exc-c14n#" PrefixList="gpnp orcl xsi"/></ds:Transform></ds:Transforms>< ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/><ds:DigestValue>L1SLg10AqGEauCQ4ne9quucITZA=</ds:DigestValue>< /ds:Reference></ds:SignedInfo><ds:SignatureValue>rTyZm9vfcQCMuian6isnAThUmsV4xPoK2fteMc1l0GIvRvHncMwLQzPM/QrXCGGTCEvgvXzUPEKzmdX2oy5vLcztN60UHr6AJtA2JYYodmrsFwEyVBQ1D6wH+HQiOe2SG9UzdQnNtWSbjD4jfZkeQWyMPfWdKm071Ek0Rfb4nxE=</ds:SignatureValue></ds:Signature></gpnp:GPnP-Profile> Success. ?????2???: <orcl:CSS-Profile id=”css” DiscoveryString=”+asm” LeaseDuration=”400?/>==»css voting disk??+ASM<orcl:ASM-Profile id=”asm” DiscoveryString=”/dev/rasm*” SPFile=”+SYSTEMDG/maclean-cluster/asmparameterfile/registry.253.788682933?/>==»??????ASM?DiscoveryString=”/dev/rasm*”,?ASM??????????????,SPFILE???ASM Parameter FILE?ALIAS ???????GPNP???ASM Parameter FILE?ALIAS,?????ASM???????SPFILE,???Diskgroup?Mount???????ASM ALIAS?????? ??????+SYSTEMDG/maclean-cluster/asmparameterfile/registry.253.788682933??SPFILE?ASM??????: [grid@maclean1 wallets]$ sqlplus / as sysasm SQL*Plus: Release 11.2.0.3.0 Production on Tue Jul 17 05:45:35 2012 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Real Application Clusters and Automatic Storage Management options SQL> set linesize 140 pagesize 1400 col "FILE NAME" format a40 set head on select NAME "FILE NAME", AU_KFFXP "AU NUMBER", NUMBER_KFFXP "FILE NUMBER", DISK_KFFXP "DISK NUMBER" from x$kffxp, v$asm_alias where GROUP_KFFXP = GROUP_NUMBER and NUMBER_KFFXP = FILE_NUMBER and name in ('REGISTRY.253.788682933') order by DISK_KFFXP,AU_KFFXP; FILE NAME AU NUMBER FILE NUMBER DISK NUMBER ---------------------------------------- ---------- ----------- ----------- REGISTRY.253.788682933 39 253 1 REGISTRY.253.788682933 35 253 3 REGISTRY.253.788682933 35 253 4 SQL> col path for a50 SQL> select disk_number,path from v$asm_disk where disk_number in (1,3,4) and GROUP_NUMBER=3; DISK_NUMBER PATH ----------- -------------------------------------------------- 3 /dev/rasm-diske 4 /dev/rasm-diskf 1 /dev/rasm-diskc ?????ASM SPFILE??????(redundancy=high),????? /dev/rasm-diskc?AU=39?/dev/rasm-diske AU=35?/dev/rasm-diskf AU=35? ????kfed?????????ASM DISK?header: [grid@maclean1 wallets]$ kfed read /dev/rasm-diske|grep spfile kfdhdb.spfile: 35 ; 0x0f4: 0x00000023 [grid@maclean1 wallets]$ kfed read /dev/rasm-diskc|grep spfile kfdhdb.spfile: 39 ; 0x0f4: 0x00000027 [grid@maclean1 wallets]$ kfed read /dev/rasm-diskf|grep spfile kfdhdb.spfile: 35 ; 0x0f4: 0x00000023 ????ASM disk header?kfdhdb.spfile??ASM SPFILE???DISK??AU NUMBER????, ASM???????????GPNP PROFILE?? DiscoveryString?????????,????ASM disk header?????kfdhdb.spfile??????,?????MOUNT DISKGROUP??????ASM SPFILE,?????ASM, ?????????????????

  Read the article

• Can I get all active directory passwords in clear text using reversible encryption?

  - by christian123

  EDIT: Can anybody actually answer the question? Thanks, I don't need no audit trail, I WILL know all the passwords and users can't change them and I will continue to do so. This is not for hacking! We recently migrated away from a old and rusty Linux/Samba domain to an active directory. We had a custom little interface to manage accounts there. It always stored the passwords of all users and all service accounts in cleartext in a secure location (Of course, many of you will certainly not think of this a being secure, but without real exploits nobody could read that) and disabled password changing on the samba domain controller. In addition, no user can ever select his own passwords, we create them using pwgen. We don't change them every 40 days or so, but only every 2 years to reward employees for really learning them and NOT writing them down. We need the passwords to e.g. go into user accounts and modify settings that are too complicated for group policies or to help users. These might certainly be controversial policies, but I want to continue them on AD. Now I save new accounts and their PWGEN-generated (pwgen creates nice sounding random words with nice amounts of vowels, consonants and numbers) manually into the old text-file that the old scripts used to maintain automatically. How can I get this functionality back in AD? I see that there is "reversible encryption" in AD accounts, probably for challenge response authentication systems that need the cleartext password stored on the server. Is there a script that displays all these passwords? That would be great. (Again: I trust my DC not to be compromised.) Or can I have a plugin into AD users&computers that gets a notification of every new password and stores it into a file? On clients that is possible with GINA-dlls, they can get notified about passwords and get the cleartext.

  Read the article

• Why would Linux VM in vSphere ESXi 5.5 show dramatically increased disk i/o latency?

  - by mhucka

  I'm stumped and I hope someone else will recognize the symptoms of this problem. Hardware: new Dell T110 II, dual-core Pentium G860 2.9 GHz, onboard SATA controller, one new 500 GB 7200 RPM cabled hard drive inside the box, other drives inside but not mounted yet. No RAID. Software: fresh CentOS 6.5 virtual machine under VMware ESXi 5.5.0 (build 174 + vSphere Client). 2.5 GB RAM allocated. The disk is how CentOS offered to set it up, namely as a volume inside an LVM Volume Group, except that I skipped having a separate /home and simply have / and /boot. CentOS is patched up, ESXi patched up, latest VMware tools installed in the VM. No users on the system, no services running, no files on the disk but the OS installation. I'm interacting with the VM via the VM virtual console in vSphere Client. Before going further, I wanted to check that I configured things more or less reasonably. I ran the following command as root in a shell on the VM: for i in 1 2 3 4 5 6 7 8 9 10; do dd if=/dev/zero of=/test.img bs=8k count=256k conv=fdatasync done I.e., just repeat the dd command 10 times, which results in printing the transfer rate each time. The results are disturbing. It starts off well: 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.451 s, 105 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 20.4202 s, 105 MB/s ... but after 7-8 of these, it then prints 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GG) copied, 82.9779 s, 25.9 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 84.0396 s, 25.6 MB/s 262144+0 records in 262144+0 records out 2147483648 bytes (2.1 GB) copied, 103.42 s, 20.8 MB/s If I wait a significant amount of time, say 30-45 minutes, and run it again, it again goes back to 105 MB/s, and after several rounds (sometimes a few, sometimes 10+), it drops to ~20-25 MB/s again. Plotting the disk latency in vSphere's interface, it shows periods of high disk latency hitting 1.2-1.5 seconds during the times that dd reports the low throughput. (And yes, things get pretty unresponsive while that's happening.) What could be causing this? I'm comfortable that it is not due to the disk failing, because I also had configured two other disks as an additional volume in the same system. At first I thought I did something wrong with that volume, but after commenting the volume out from /etc/fstab and rebooting, and trying the tests on / as shown above, it became clear that the problem is elsewhere. It is probably an ESXi configuration problem, but I'm not very experienced with ESXi. It's probably something stupid, but after trying to figure this out for many hours over multiple days, I can't find the problem, so I hope someone can point me in the right direction. (P.S.: yes, I know this hardware combo won't win any speed awards as a server, and I have reasons for using this low-end hardware and running a single VM, but I think that's besides the point for this question [unless it's actually a hardware problem].) ADDENDUM #1: Reading other answers such as this one made me try adding oflag=direct to dd. However, it makes no difference in the pattern of results: initially the numbers are higher for many rounds, then they drop to 20-25 MB/s. (The initial absolute numbers are in the 50 MB/s range.) ADDENDUM #2: Adding sync ; echo 3 > /proc/sys/vm/drop_caches into the loop does not make a difference at all. ADDENDUM #3: To take out further variables, I now run dd such that the file it creates is larger than the amount of RAM on the system. The new command is dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct. Initial throughput numbers with this version of the command are ~50 MB/s. They drop to 20-25 MB/s when things go south. ADDENDUM #4: Here is the output of iostat -d -m -x 1 running in another terminal window while performance is "good" and then again when it's "bad". (While this is going on, I'm running dd if=/dev/zero of=/test.img bs=16k count=256k conv=fdatasync oflag=direct.) First, when things are "good", it shows this: When things go "bad", iostat -d -m -x 1 shows this:

  Read the article

• How to backup Servers to an SSH-Host with low traffic and access to versions and encryption?

  - by leto

  Hello, I've not run backups for the past dont't remember anymore years for my personal stuff until waking up lately and realising contrary to my prior belief: Actually. I care! :) Now I have a central data server at home where I want to attach an external media to, to which I want to save backups of my most important stuff, like years of self-written scripts, database dumps, you name it. I've tinkered with rsync+ssh over the last two years, also tried tar over ssh, but don't know the simplest and most easy to maintain way to do it yet. Heres my workload: A typical LAMP-Server (<5GB Data) which I'd like to backup fully so lots of small files connected via 10Mbit My personal stuff (<750GB Data) from a Mac connected via GE My passwords in an encrypted container (100Mb) from OpenBSD connected via serial-PPP My E-Mail from the last ten years (<25GB) as Maildir which I need to keep in readable format Some archives (tar.*) which I need to backup only once and keep in readable format (Deleted my ideas, as I'm here for suggestions) What I need: 1. Use an ssh-tunnel for data transfer 2. Be quick with lots of small files 3. Keep revisions 4. Be sure the data I save is not corrupted 5. Intelligent resume functions and be able to deal with network congestion :) 6. Compressed and optionally encrypted storage 7. Be able to extract data from backup easily (filesystem like usage would be nice) How would and with what software would you backup this stuff? Hints to tools that can help solve only part of my problem (like encryption) also greatly appreciated. Greets

  Read the article

• Using MD5 to generate an encryption key from password?

  - by Charles

  I'm writing a simple program for file encryption. Mostly as an academic exercise but possibly for future serious use. All of the heavy lifting is done with third-party libraries, but putting the pieces together in a secure manner is still quite a challenge for the non-cryptographer. Basically, I've got just about everything working the way I think it should. I'm using 128-bit AES for the encryption with a 128-bit key length. I want users to be able to enter in variable-length passwords, so I decided to hash the password with MD5 and then use the hash as the key. I figured this was acceptable--the key is always supposed to be a secret, so there's no reason to worry about collision attacks. Now that I've implemented this, I ran across a couple articles indicating that this is a bad idea. My question is: why? If a good password is chosen, the cipher is supposed to be strong enough on its own to never reveal the key except via an extraordinary (read: currently infeasible) brute-force effort, right? Should I be using something like PBKDF2 to generate the key or is that just overkill for all but the most extreme cryptographic applications?

  Read the article

• How to connect to a third party website in classic asp using javascript for password encryption and yet not giving in the password.

  - by Abbi

  Hi I have to make changes to classic asp website where once a button is clicked it autologins to a third party website with a intermediate page that warns that you are logging in to a third party website. The thirdparty is providing us with a username and password and gave us an examle javascript to encode the password to send to them. Now where do I store the userid and password. I cannot execute the javascript on the serverside. It has to go to the client. If the asp page which has the encryption javascript goes to the client side then the source can be viewed and the username and password is given out. Is there a way that I can have hidden asp page whose only job is to encrypt the password and create a new url and auto redirect it to that new url. So when the user clicks ok on the intermediate warning page I redirect it to this hidden asp page which does the encryption and a creates a url for get method and redirects to that page. I am a novice as far as java script and classic asp is concerned. Any ideas/ advice will be appreciated. Thanks, --Abbi

  Read the article

• How to fix "Disk drive for /boot/efi is not ready or not present"?

  - by N.N.

  After I updated BIOS/UEFI version to 1101 on an Asus P8Z68-V PRO motherboard Ubuntu (11.10) did not boot. After POST all I saw was a black screen with a blinking cursor in the top left corner. I booted an Ubuntu 11.10 live-CD and set the flag for the 20 MB partition before my boot partition to "bios_grub". Then I was able to boot and login. But now every time I boot and Ubuntu loads I get the following message: Disk drive for /boot/efi is not ready or not present. Continue waiting or press s to skip or m for manual recovery. I am able to login if I choose to ignore it by pressing s, but what does this message mean? How can I fix what the message warns about? After logging in I have noticed that /boot/efi is empty. The following forum post speaks of the same issue ubuntuforums.org/showthread.php?t=1893030. Updating to the latest BIOS/UEFI - version 3203, did not have any effect on this issue.

  Read the article

• Why do I get disk I/O errors booting the 3.2 kernel on a xen vps server?

  - by Doug

  I have a xen vps, which I just upgraded to the new LTS 12 Precise Pangolin. However, I see this error on booting: [ 12.848076] end_request: I/O error, dev xvda, sector 12841 [ 12.848093] end_request: I/O error, dev xvda, sector 12841 [ 12.848103] Buffer I/O error on device xvda1, logical block 1605 [ 12.848110] lost page write due to I/O error on xvda1 [ 12.848129] Aborting journal on device xvda1. Results in / being mounted read-only. Reboot: [ 3.087257] EXT3-fs (xvda1): warning: ext3_clear_journal_err: Marking fs in need of filesystem check. [ 3.087677] EXT3-fs (xvda1): recovery complete [ 3.088514] EXT3-fs (xvda1): mounted filesystem with ordered data mode Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. fsck from util-linux 2.20.1 PRGMRDISK1 contains a file system with errors, check forced. Checking disk drives for errors. This may take several minutes. Press C to cancel all checks in progress PRGMRDISK1: ***** REBOOT LINUX ***** PRGMRDISK1: 371152/6001184 files (2.8% non-contiguous), 4727949/12000000 blocks mountall: fsck / [308] terminated with status 3 mountall: System must be rebooted: / [ 151.566949] Restarting system. Name ID Mem VCPUs State Time(s) shadowmint 236 2048 1 --p--- 0.0 Reboot - back to 1. This is definitely an issue with the 3.2 kernel, because booting the 3.0.0 or 2.6.38 kernel series make this issue magically disappear. I'm certain this is some kind of weird xen thing, but no idea. Anyone? Anyhow, until this is resolve I strongly recommend against upgrading if you're running a xen server.

  Read the article

• error/message: the disk drive for /home is not ready... when connecting an external hard drive

  - by seallussus

  i am running Ubuntu 10.04 all updated installed to date (3/28/2012) and when i connect another sata HD i get this message the disk drive for /home is not ready yet or not present continue to wait, or press S to skip mounting or M for manual recovery so i press S but i get this message could not update ICEauthority file /home/username/.ICEauthority And when a press close i get this there is a problem with the configuration server (/usr/libconf2-4/gconf-sanity-check-2 exited with status 256) And when a press close i get message Nautilus could not create the following required folders :/home/username/desktop,/home/username/.Nautilus before running Nautilus, please create these folders or set permissons such that Nautilus can reach them And finally when a press Ok at the last message it disappears and i get a blank screen with a lot of colors on it and with nothing else so i shutdown (power button ) and disconnect the HD and boot without problems so how to fix this in simple commands because i am a total Linux noob notes -In the original error my username was in place of username i wrote (did not want to confuse anybody ) -I tried searching for this problem but a got a lot of different answers and most of them were really complicated to me and not working -I got a data HD connected and working without problems also the HD i installed Ubuntu on is Sata (maybe it helps) -Apologize for me bad English its not my mother language

  Read the article

• QNAP NAS 509 (LINUX) - how to unmout busy volume and find physical disk?

  - by Horst Walter

  On my NAS QNAP TS 509 I do have a technical issue. I need to run e2fsck. This works fine for me on md0 (see below), but how can I unmount the busy devices md9 and sda4 in order to do the same. Whenever I try, I fail because the device is busy. [This part is solved, see below] In order to further track down the issue, I'd need to sort out the physical disk to device relationship. How can I find out this, e.g. md0 is a stripped volume on 2 disk (but I need to find out on what physical disk). Remark: As you can easily derive from my questions, I am not a Linux expert, but manage to get along. /dev/ram0 124.0M 94.1M 29.8M 76% / tmpfs 32.0M 80.0k 31.9M 0% /tmp /dev/sda4 310.0M 103.9M 206.1M 34% /mnt/ext /dev/md9 509.5M 39.2M 470.2M 8% /mnt/HDA_ROOT /dev/md0 1.8T 1.4T 444.7G 76% /share/MD0_DATA tmpfs 32.0M 0 32.0M 0% /.eaccelerator.tmp -- Added -- QNAP seems to be based on Busybox. I do not find something like init / telinit / runlevel. At busybox docs it says that I need to run the below. But in /var/service sv is not available. I want to go to single user mode to unmount the devices. # cd /var/service # sv d * # sv u getty* -- Added, thanks A4L -- This QNAP Box runs a special flavor of Linux, so not all SOPs do apply. In my particular case I found a services.sh script, stopping all services. After that the drive could be unmounted. The information passed by A4L is valid and worth reading it, maybe I'll profit from it next time. Links: http://unix.stackexchange.com/questions/19918/umount-device-is-busy and http://unix.stackexchange.com/questions/15024/umount-device-is-busy-why So the unmount issue is solved, still looking for the best option to find the physical to volume mapping.

  Read the article

• An easily customizable linux distribution using minimal disk space?

  - by Frank

  I'm looking for a linux distribution that can be easily used to create my own distribution that's the same system with some software installed. So basically I should be able to create an iso which, when installed, will have the linux distribution with my desired installed. More specifically, I plan on installing mysql and a bit of my own software which shouldn't be too big. However, this distribution needs to be extremely small in terms of disk space. The distribution, including mysql should not exceed 100mb. It should, of course still be able to connect to the internet and perform other standard functions. I don't need X/any sort of window manager, and would prefer not to have it since it would increase disk usage. Currently I have tried ttylinux and tiny core linux. I've found that ttylinux, while is extremely small, has almost nothing so that mysql can't even be installed. Tiny core linux, on the other hand is a bit too big. I've found openembedded and linux from scratch, but I would prefer for the install and build process to be much easier. What other distribution would you recommend for my purposes? Minimizing disk usage is the most important, followed by ease of installing and creating the custom distribution.

  Read the article

• How to convert a raw disk image to a copy-on-write image based on another image for use with kvm and

  - by Jean-Paul Calderone

  I have a virtual Windows machine running on kvm. Presently it has a 90GB raw disk image. I would like to clone this VM without having to keep two copies of the 90GB raw disk image around. It seems like a good approach for doing this is to make two new qcow or qcow2 images based on the original. First I converted the raw image to a qcow2 image: qemu-img convert -O qcow2 basewindowsxp.img basewindowsxp.qcow2 Then I tried creating a new image backed by this: qemu-img create -F qcow2 -f qcow2 -b `pwd`/basewindowsxp.qcow2 windowsxp-1.qcow2 Then I used virt-manager to point the original VM at windowsxp-1.qcow2. However, when I try to start up the VM in this new configuration, virt-manager reports an error: Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/engine.py", line 588, in run_domain vm.startup() File "/usr/share/virt-manager/virtManager/domain.py", line 150, in startup self._backend.create() File "/usr/lib/python2.6/dist-packages/libvirt.py", line 300, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: internal error unable to start guest: qemu: could not open disk image /var/lib/libvirt/images/windowsxp-1.qcow2 The error suggests that the filename was misspecified or that the filesystem permissions are too restrictive, but neither of these is the case: $ ls -l /var/lib/libvirt/images/windowsxp-1.qcow2 -rwxrwxrwx 1 root root 262144 2010-05-27 08:32 /var/lib/libvirt/images/windowsxp-1.qcow2 Why won't virt-manager start this vm?

  Read the article

• Running KVM/XEN/Hyper-V VMs from a RAM disk, is this possible? Practical?

  - by Ausmith1

  Currently I'm using ESX (v3 and v4) to test a scripted OS (Windows 2003) and application install DVD. The DVD ISO (8GB) is mounted on a 1Gbps NFS datastore and the VMDK's (20GB) are on an SSD mounted via NFS over a 10Gbps link. It still takes a lot longer than I'd really like for to run through a test iteration and I'm wondering if mounting the virtual disks and ISO on a RAM disk on the same server as the hypervisor is running on would be worth my while. I can dedicate a server to this VM and 32GB of RAM in the system should be adequate to do the trick I'd guess. (1GB hypervisor OS, 28GB RAM disk and 2GB for the VM is < the 32GB available to me) Since hosting a RAM disk within ESX does not seem possible I'm open to trying KVM/Xen/Hyper-V. KVM would probably be my first choice of these three. Anyone out there tried this? Bear in mind this is purely for a test run of the installer, the VM will be discarded as soon as the test is completed so I'm not worried about losing data from the remote possibility of a power failure.

  Read the article

• Apache httpd: Send error logs to syslog and local disk? Without touching /etc/syslog.conf?

  - by Stefan Lasiewski

  I have an Apache httpd 2.2 server. I want to log all messages using syslog, so that the requests are sent to our central syslog server. I also want to ensure that all log messages are sent to local disk, so that a sysadmin can have easy access to the log files on the local system. It is easy to send HTTP access logs to both the local disk and to syslog. One common method is: LogFormat "%V %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined CustomLog logs/access_log combined CustomLog "|/usr/bin/logger -t httpd -i -p local4.info" combined But it is not easy to do this for error logs. The following configuration doesn't work, because the error logs only use the last ErrorLog stanza. The first ErrorLog stanza is ignored. ErrorLog logs/error_log ErrorLog syslog:local4.error How can I ensure that Apache errors logs are written to the local disk and are sent to syslog? Is it possible to do this without touching /etc/syslog.conf ? I am fine if my users want to manage their own Apache configuration files, but I do not want them touching system files such as /etc/syslog.conf

  Read the article

• What's up with LDoms: Part 2 - Creating a first, simple guest

  - by Stefan Hinker

  Welcome back! In the first part, we discussed the basic concepts of LDoms and how to configure a simple control domain.  We saw how resources were put aside for guest systems and what infrastructure we need for them.  With that, we are now ready to create a first, very simple guest domain.  In this first example, we'll keep things very simple.  Later on, we'll have a detailed look at things like sizing, IO redundancy, other types of IO as well as security. For now,let's start with this very simple guest.  It'll have one core's worth of CPU, one crypto unit, 8GB of RAM, a single boot disk and one network port.  CPU and RAM are easy.  The network port we'll create by attaching a virtual network port to the vswitch we created in the primary domain.  This is very much like plugging a cable into a computer system on one end and a network switch on the other.  For the boot disk, we'll need two things: A physical piece of storage to hold the data - this is called the backend device in LDoms speak.  And then a mapping between that storage and the guest domain, giving it access to that virtual disk.  For this example, we'll use a ZFS volume for the backend.  We'll discuss what other options there are for this and how to chose the right one in a later article.  Here we go: root@sun # ldm create mars root@sun # ldm set-vcpu 8 mars root@sun # ldm set-mau 1 mars root@sun # ldm set-memory 8g mars root@sun # zfs create rpool/guests root@sun # zfs create -V 32g rpool/guests/mars.bootdisk root@sun # ldm add-vdsdev /dev/zvol/dsk/rpool/guests/mars.bootdisk \ mars.root@primary-vds root@sun # ldm add-vdisk root mars.root@primary-vds mars root@sun # ldm add-vnet net0 switch-primary mars That's all, mars is now ready to power on.  There are just three commands between us and the OK prompt of mars:  We have to "bind" the domain, start it and connect to its console.  Binding is the process where the hypervisor actually puts all the pieces that we've configured together.  If we made a mistake, binding is where we'll be told (starting in version 2.1, a lot of sanity checking has been put into the config commands themselves, but binding will catch everything else).  Once bound, we can start (and of course later stop) the domain, which will trigger the boot process of OBP.  By default, the domain will then try to boot right away.  If we don't want that, we can set "auto-boot?" to false.  Finally, we'll use telnet to connect to the console of our newly created guest.  The output of "ldm list" shows us what port has been assigned to mars.  By default, the console service only listens on the loopback interface, so using telnet is not a large security concern here. root@sun # ldm set-variable auto-boot\?=false mars root@sun # ldm bind mars root@sun # ldm start mars root@sun # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- UART 8 7680M 0.5% 1d 4h 30m mars active -t---- 5000 8 8G 12% 1s root@sun # telnet localhost 5000 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ~Connecting to console "mars" in group "mars" .... Press ~? for control options .. {0} ok banner SPARC T3-4, No Keyboard Copyright (c) 1998, 2011, Oracle and/or its affiliates. All rights reserved. OpenBoot 4.33.1, 8192 MB memory available, Serial # 87203131. Ethernet address 0:21:28:24:1b:50, Host ID: 85241b50. {0} ok We're done, mars is ready to install Solaris, preferably using AI, of course ;-)  But before we do that, let's have a little look at the OBP environment to see how our virtual devices show up here: {0} ok printenv auto-boot? auto-boot? = false {0} ok printenv boot-device boot-device = disk net {0} ok devalias root /virtual-devices@100/channel-devices@200/disk@0 net0 /virtual-devices@100/channel-devices@200/network@0 net /virtual-devices@100/channel-devices@200/network@0 disk /virtual-devices@100/channel-devices@200/disk@0 virtual-console /virtual-devices/console@1 name aliases We can see that setting the OBP variable "auto-boot?" to false with the ldm command worked.  Of course, we'd normally set this to "true" to allow Solaris to boot right away once the LDom guest is started.  The setting for "boot-device" is the default "disk net", which means OBP would try to boot off the devices pointed to by the aliases "disk" and "net" in that order, which usually means "disk" once Solaris is installed on the disk image.  The actual devices these aliases point to are shown with the command "devalias".  Here, we have one line for both "disk" and "net".  The device paths speak for themselves.  Note that each of these devices has a second alias: "net0" for the network device and "root" for the disk device.  These are the very same names we've given these devices in the control domain with the commands "ldm add-vnet" and "ldm add-vdisk".  Remember this, as it is very useful once you have several dozen disk devices... To wrap this up, in this part we've created a simple guest domain, complete with CPU, memory, boot disk and network connectivity.  This should be enough to get you going.  I will cover all the more advanced features and a little more theoretical background in several follow-on articles.  For some background reading, I'd recommend the following links: LDoms 2.2 Admin Guide: Setting up Guest Domains Virtual Console Server: vntsd manpage - This includes the control sequences and commands available to control the console session. OpenBoot 4.x command reference - All the things you can do at the ok prompt

  Read the article

• 13.10 upgrade dropping wifi [on hold]

  - by Daryl

  Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

  Read the article

• Wireless Connected But No Internet Connection (Ubuntu 12.04)

  - by Zxy

  I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >