Search Results

Search found 6772 results on 271 pages for 'exit strategy'.

Page 106/271 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• Can't configure frame relay T1 on Cisco 1760

  - by sonar

  For the past few days I've been trying to configure a data T1 via a Frame Relay. Now I've been pretty unsuccessful at it, and it's been a while, since I've done this so please bare with me. The ISP provided me the following information: 1. IP address 2. Gateway address 3. Encapsulation Frame Relay 4. DLCI 100 5. BZ8 ESF (I think the bz8 was supposed to be b8zs) 6. Time Slot (1 al 24). And what I have configured up until now is the following: interface Serial0/0 ip address <ip address> 255.255.255.252 encapsulation frame-relay service-module t1 timeslots 1-24 frame-relay interface-dlci 100 sh service-module s0/0 (outputs): Module type is T1/fractional Hardware revision is 0.128, Software revision is 0.2, Image checksum is 0x73D70058, Protocol revision is 0.1 Receiver has no alarms. Framing is **ESF**, Line Code is **B8ZS**, Current clock source is line, Fraction has **24 timeslots** (64 Kbits/sec each), Net bandwidth is 1536 Kbits/sec. Last module self-test (done at startup): Passed Last clearing of alarm counters 00:17:17 loss of signal : 0, loss of frame : 0, AIS alarm : 0, Remote alarm : 2, last occurred 00:10:10 Module access errors : 0, Total Data (last 1 15 minute intervals): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs Data in current interval (138 seconds elapsed): 0 Line Code Violations, 0 Path Code Violations 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs sh int: FastEthernet0/0 is up, line protocol is up Hardware is PQUICC_FEC, address is 000d.6516.e5aa (bia 000d.6516.e5aa) Internet address is 10.0.0.1/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:20:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog 0 input packets with dribble condition detected 191 packets output, 20676 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out Serial0/0 is up, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY, loopback not set Keepalive set (10 sec) LMI enq sent 157, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 23, LMI stat sent 0, LMI upd sent 0 LMI DLCI 1023 LMI type is CISCO frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/64, broadcasts sent/dropped 2/0, interface broadcasts 0 Last input 00:24:51, output 00:00:05, output hang never Last clearing of "show interface" counters 00:27:20 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1152 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 23 packets input, 302 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 1725 input errors, 595 CRC, 1099 frame, 0 overrun, 0 ignored, 30 abort 246 packets output, 3974 bytes, 0 underruns 0 output errors, 0 collisions, 48 interface resets 0 output buffer failures, 0 output buffers swapped out 4 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up Serial0/0.1 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never Serial0/0.100 is down, line protocol is down Hardware is PQUICC with Fractional T1 CSU/DSU Internet address is <ip address>/30 MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation FRAME-RELAY Last clearing of "show interface" counters never And everything seems to be accounted for to me, but apparently I'm missing something. My issue is that I'm stuck on interface up, line protocol down, so the T1 doesn't go up. Any ideas? Thank you,

  Read the article

• From Binary to Data Structures

  - by Cédric Menzi

  Table of Contents Introduction PE file format and COFF header COFF file header BaseCoffReader Byte4ByteCoffReader UnsafeCoffReader ManagedCoffReader Conclusion History This article is also available on CodeProject Introduction Sometimes, you want to parse well-formed binary data and bring it into your objects to do some dirty stuff with it. In the Windows world most data structures are stored in special binary format. Either we call a WinApi function or we want to read from special files like images, spool files, executables or may be the previously announced Outlook Personal Folders File. Most specifications for these files can be found on the MSDN Libarary: Open Specification In my example, we are going to get the COFF (Common Object File Format) file header from a PE (Portable Executable). The exact specification can be found here: PECOFF PE file format and COFF header Before we start we need to know how this file is formatted. The following figure shows an overview of the Microsoft PE executable format. Source: Microsoft Our goal is to get the PE header. As we can see, the image starts with a MS-DOS 2.0 header with is not important for us. From the documentation we can read "...After the MS DOS stub, at the file offset specified at offset 0x3c, is a 4-byte...". With this information we know our reader has to jump to location 0x3c and read the offset to the signature. The signature is always 4 bytes that ensures that the image is a PE file. The signature is: PE\0\0. To prove this we first seek to the offset 0x3c, read if the file consist the signature. So we need to declare some constants, because we do not want magic numbers.   private const int PeSignatureOffsetLocation = 0x3c; private const int PeSignatureSize = 4; private const string PeSignatureContent = "PE";   Then a method for moving the reader to the correct location to read the offset of signature. With this method we always move the underlining Stream of the BinaryReader to the start location of the PE signature.   private void SeekToPeSignature(BinaryReader br) { // seek to the offset for the PE signagure br.BaseStream.Seek(PeSignatureOffsetLocation, SeekOrigin.Begin); // read the offset int offsetToPeSig = br.ReadInt32(); // seek to the start of the PE signature br.BaseStream.Seek(offsetToPeSig, SeekOrigin.Begin); }   Now, we can check if it is a valid PE image by reading of the next 4 byte contains the content PE.   private bool IsValidPeSignature(BinaryReader br) { // read 4 bytes to get the PE signature byte[] peSigBytes = br.ReadBytes(PeSignatureSize); // convert it to a string and trim \0 at the end of the content string peContent = Encoding.Default.GetString(peSigBytes).TrimEnd('\0'); // check if PE is in the content return peContent.Equals(PeSignatureContent); }   With this basic functionality we have a good base reader class to try the different methods of parsing the COFF file header. COFF file header The COFF header has the following structure: Offset Size Field 0 2 Machine 2 2 NumberOfSections 4 4 TimeDateStamp 8 4 PointerToSymbolTable 12 4 NumberOfSymbols 16 2 SizeOfOptionalHeader 18 2 Characteristics If we translate this table to code, we get something like this:   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public MachineType Machine; public ushort NumberOfSections; public uint TimeDateStamp; public uint PointerToSymbolTable; public uint NumberOfSymbols; public ushort SizeOfOptionalHeader; public Characteristic Characteristics; } BaseCoffReader All readers do the same thing, so we go to the patterns library in our head and see that Strategy pattern or Template method pattern is sticked out in the bookshelf. I have decided to take the template method pattern in this case, because the Parse() should handle the IO for all implementations and the concrete parsing should done in its derived classes.   public CoffHeader Parse() { using (var br = new BinaryReader(File.Open(_fileName, FileMode.Open, FileAccess.Read, FileShare.Read))) { SeekToPeSignature(br); if (!IsValidPeSignature(br)) { throw new BadImageFormatException(); } return ParseInternal(br); } } protected abstract CoffHeader ParseInternal(BinaryReader br);   First we open the BinaryReader, seek to the PE signature then we check if it contains a valid PE signature and rest is done by the derived implementations. Byte4ByteCoffReader The first solution is using the BinaryReader. It is the general way to get the data. We only need to know which order, which data-type and its size. If we read byte for byte we could comment out the first line in the CoffHeader structure, because we have control about the order of the member assignment.   protected override CoffHeader ParseInternal(BinaryReader br) { CoffHeader coff = new CoffHeader(); coff.Machine = (MachineType)br.ReadInt16(); coff.NumberOfSections = (ushort)br.ReadInt16(); coff.TimeDateStamp = br.ReadUInt32(); coff.PointerToSymbolTable = br.ReadUInt32(); coff.NumberOfSymbols = br.ReadUInt32(); coff.SizeOfOptionalHeader = (ushort)br.ReadInt16(); coff.Characteristics = (Characteristic)br.ReadInt16(); return coff; }   If the structure is as short as the COFF header here and the specification will never changed, there is probably no reason to change the strategy. But if a data-type will be changed, a new member will be added or ordering of member will be changed the maintenance costs of this method are very high. UnsafeCoffReader Another way to bring the data into this structure is using a "magically" unsafe trick. As above, we know the layout and order of the data structure. Now, we need the StructLayout attribute, because we have to ensure that the .NET Runtime allocates the structure in the same order as it is specified in the source code. We also need to enable "Allow unsafe code (/unsafe)" in the project's build properties. Then we need to add the following constructor to the CoffHeader structure.   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public CoffHeader(byte[] data) { unsafe { fixed (byte* packet = &data[0]) { this = *(CoffHeader*)packet; } } } }   The "magic" trick is in the statement: this = *(CoffHeader*)packet;. What happens here? We have a fixed size of data somewhere in the memory and because a struct in C# is a value-type, the assignment operator = copies the whole data of the structure and not only the reference. To fill the structure with data, we need to pass the data as bytes into the CoffHeader structure. This can be achieved by reading the exact size of the structure from the PE file.   protected override CoffHeader ParseInternal(BinaryReader br) { return new CoffHeader(br.ReadBytes(Marshal.SizeOf(typeof(CoffHeader)))); }   This solution is the fastest way to parse the data and bring it into the structure, but it is unsafe and it could introduce some security and stability risks. ManagedCoffReader In this solution we are using the same approach of the structure assignment as above. But we need to replace the unsafe part in the constructor with the following managed part:   [StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)] public struct CoffHeader { public CoffHeader(byte[] data) { IntPtr coffPtr = IntPtr.Zero; try { int size = Marshal.SizeOf(typeof(CoffHeader)); coffPtr = Marshal.AllocHGlobal(size); Marshal.Copy(data, 0, coffPtr, size); this = (CoffHeader)Marshal.PtrToStructure(coffPtr, typeof(CoffHeader)); } finally { Marshal.FreeHGlobal(coffPtr); } } }     Conclusion We saw that we can parse well-formed binary data to our data structures using different approaches. The first is probably the clearest way, because we know each member and its size and ordering and we have control about the reading the data for each member. But if add member or the structure is going change by some reason, we need to change the reader. The two other solutions use the approach of the structure assignment. In the unsafe implementation we need to compile the project with the /unsafe option. We increase the performance, but we get some security risks.

  Read the article

• Secure wipe of a hard drive using WinPE.

  - by Derek Meier

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} The wiping of a hard drive is typically seen as fairly trivial.  There are tons of applications out there that will do it for you.  Point àClickàGlobal-Thermo Nuclear War. However, these applications are typically expensive or unreliable.  Plus, if you have a laptop or lack a secondary computer to put the hard drive into – how on earth do you wipe it quickly and easily while still conforming to a 7 pass rule (this means that every possible bit on the hard drive is set to 0 and then to 1 seven times in a row)?  Yes, one pass should be enough – as turning every bit from a 1 to a zero will wipe the data from existence.  But, we’re dealing with tinfoil hat wearing types here people.  DOD standards dictate at least 3 passes, and typically 7 is the preferred amount.  I’m not going to argue about data recovery.  I have been told to use 7 passes, and so I will.  So say we all! Quite some time ago I used to make a BartPE XP-based boot cd for the original purpose of securely wiping data.  I loved BartPE and integrated so many plugins into my builds that I could do pretty much anything directly from CD.  Reset passwords, uninstall security updates, wipe drives, chkdsk, remove spyware, install Windows, etc.  However, with the newer multi-core systems and new chipsets coming out from vendors, I found that BartPE was rather difficult to keep up to date.  I have since switched to WinPE 3.0 (Windows Preinstallation Environment). http://technet.microsoft.com/en-us/library/cc748933(WS.10).aspx  It is fairly simple to create your own CD, and I have made a few helpful scripts to easily integrate drivers and rebuild the ISO file for you.  I’ll cover making your own boot CD utilizing WinPE 3.0 in a later post – I can talk about WinPE forever and need to collect my thoughts!!  My wife loves talking about WinPE almost as much as talking about Doctor Who.  Wait, did I say loves?  Hmmmm, I may have meant loathes. The topic at hand?  Right. Wiping a drive! I must have drunk too much coffee this morning.  I like to use a simple batch script that calls a combination of diskpart.exe from Microsoft® and Sdelete.exe created by our friend Mark Russinovich. http://technet.microsoft.com/en-us/sysinternals/bb897443.aspx All of the following files are located within the same directory on my WinPE boot CD. Here are the contents of wipe_me.bat, script.txt and sdelete.reg. Wipe_me.bat:   @echo off echo. echo     I will completely wipe the local hard drives using echo     7 individual wipes. The data will NOT echo     be recoverable.  I will begin after you pause echo. echo Preparing to partition and format disk. Diskpart.exe /s "script.txt" REM I was annoyed by not having a completely automated script – and Sdelete wants you to accept the license agreement. So, I added a registry file to skip doing that. regedit /S sdelete.reg rem sdelete options selected are: -p (passes) -c (zero free space) -s (recurse through subdirectories, if any) -z (clean free space) [drive letter] sdelete.exe -p 7 -c -s -z c: echo. echo Pass seven complete. echo. echo Wiping complete. Pause exit script.txt: list disk select disk 0 clean create partition primary select partition 1 active format FS=NTFS LABEL="New Volume" QUICK assign letter=c exit *Notes: This script assumes one local hard drive – change the script as you see fit for your environment.  The clean command will overwrite the master boot record and any hidden sector information – so be careful!   sdelete.reg: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Software\Sysinternals\SDelete] "EulaAccepted"=dword:00000001   With a combination of WinPE, sdelete.exe and your friendly neighborhood text editor you can begin wiping drives as quickly and easily as possible!  I hope this helps, I get asked this a lot in my line of work. Best of luck, Derek

  Read the article

• Cannot install mysql-server (5.5.22) on clean ubuntu 12.04 LTS server

  - by Christian

  I have a clean minimal install of Ubuntu 12.04 LTS server 64-bit (just a root user and nothing alse installed). I tried to install the mysql-server with the following command: apt-get install mysql-server The installation aborts with the following error: The following NEW packages will be installed: libdbd-mysql-perl{a} libmysqlclient18{a} mysql-client mysql-client-5.5{a} mysql-client-core-5.5{a} mysql-common{a} mysql-server mysql-server-5.5{a} mysql-server-core-5.5{a} 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 11.7 kB/26.2 MB of archives. After unpacking 94.5 MB will be used. Do you want to continue? [Y/n/?] y Get: 1 http://mirror.eu.oneandone.net/ubuntu/ubuntu/ precise/main mysql-client all 5.5.22-0ubuntu1 [11.7 kB] Fetched 11.7 kB in 0s (567 kB/s) Preconfiguring packages ... Selecting previously unselected package mysql-common. (Reading database ... 54008 files and directories currently installed.) Unpacking mysql-common (from .../mysql-common_5.5.22-0ubuntu1_all.deb) ... Selecting previously unselected package libmysqlclient18. Unpacking libmysqlclient18 (from .../libmysqlclient18_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package libdbd-mysql-perl. Unpacking libdbd-mysql-perl (from .../libdbd-mysql-perl_4.020-1build2_amd64.deb) ... Selecting previously unselected package mysql-client-core-5.5. Unpacking mysql-client-core-5.5 (from .../mysql-client-core-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-client-5.5. Unpacking mysql-client-5.5 (from .../mysql-client-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-server-core-5.5. Unpacking mysql-server-core-5.5 (from .../mysql-server-core-5.5_5.5.22-0ubuntu1_amd64.deb) ... Processing triggers for man-db ... Setting up mysql-common (5.5.22-0ubuntu1) ... Selecting previously unselected package mysql-server-5.5. (Reading database ... 54189 files and directories currently installed.) Unpacking mysql-server-5.5 (from .../mysql-server-5.5_5.5.22-0ubuntu1_amd64.deb) ... Selecting previously unselected package mysql-client. Unpacking mysql-client (from .../mysql-client_5.5.22-0ubuntu1_all.deb) ... Selecting previously unselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.5.22-0ubuntu1_all.deb) ... Processing triggers for ureadahead ... Processing triggers for man-db ... Setting up libmysqlclient18 (5.5.22-0ubuntu1) ... Setting up libdbd-mysql-perl (4.020-1build2) ... Setting up mysql-client-core-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-client-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-server-core-5.5 (5.5.22-0ubuntu1) ... Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... 120502 10:17:41 [Note] Plugin 'FEDERATED' is disabled. 120502 10:17:41 InnoDB: The InnoDB memory heap is disabled 120502 10:17:41 InnoDB: Mutexes and rw_locks use GCC atomic builtins 120502 10:17:41 InnoDB: Compressed tables use zlib 1.2.3.4 120502 10:17:41 InnoDB: Initializing buffer pool, size = 128.0M 120502 10:17:41 InnoDB: Completed initialization of buffer pool 120502 10:17:41 InnoDB: highest supported file format is Barracuda. 120502 10:17:41 InnoDB: Waiting for the background threads to start 120502 10:17:42 InnoDB: 1.1.8 started; log sequence number 1595675 120502 10:17:42 InnoDB: Starting shutdown... 120502 10:17:42 InnoDB: Shutdown completed; log sequence number 1595675 start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Setting up mysql-client (5.5.22-0ubuntu1) ... dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up mysql-server-5.5 (5.5.22-0ubuntu1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.5 mysql-server I am completely lost because I have tried everything on the web to solve my problem (clearning the install, reconfiguring with dpkg, manually editing the my.cnf). I also set up a new clean install but nothing helped. What am I doing wrong? New information: The file /var/log/upstart/mysql.log contains the following error after the installation: AppArmor parser error for /etc/apparmor.d/usr.sbin.mysqld in /etc/apparmor.d/tunables/global at line 17: Could not open 'tunables/proc'

  Read the article

• Non-perfect maze generation algorithm

  - by Shylux

  I want to generate a maze with the following properties: The maze is non-perfect. Means it has loops and multiple ways to reach the exit. The maze should be random. The algorithm should output different mazes for different input parameters The maze doesn't have to be braided. Means dead-ends are allowed and appreciated. I just can't find the right resources on google. The closest i found was this description of the different types of algorithms: http://www.astrolog.org/labyrnth/algrithm.htm. All other algorithms were for perfect mazes. Can anyone give me a website where i can look this up or maybe an algorithm directly?

  Read the article

• Fast Fashion Freshness

  - by David Dorf

  Fashion retailers such as H&M, Zara, and Wet Seal have perfected the fast fashion retailing model. The concept requires no replenishment in order to maintain assortment freshness and to create a sense of urgency for the consumer to purchase now. However, maintaining assortment freshness results in high product turnover, making markdown optimization a necessity. Wet Seal, for instance, needed to move from ad-hoc markdowns and dealing with surplus inventory to handling markdowns methodically across 8,000 SKUs with only 12-15 week lifecycle (from DC receipt to exit). By optimizing and automating markdowns, Wet Seal is reaching their goal of assortment freshness, which in turn increases sales. If you're interested in learning more, register for a free webinar occurring on May 13th featuring Join Daniel Ryu, Vice President of Planning and Allocation at Wet Seal. He'll be discussing how the fast fashion retailer maintains their goal of assortment freshness.

  Read the article

• The Partner Perspective from Oracle OpenWorld 2012 - IDC’s Darren Bibby report

  - by Richard Lefebvre

  Below is IDC’s Darren Bibby report on ‘The Partner Perspective from Oracle OpenWorld 2012’. If you missed the 2012 edition, I trust this will give you the willingness to attend next year one! October 26, 2012 I attended my fourth Oracle OpenWorld earlier in October. I always go in with the lens of, "What's in it for partners this year?" Although it's primarily thought of as a customer event - and yes, the bulk of the almost 50,000 attendees are customers - this year's conference was clearly the largest and most important partner event Oracle has ever run. Oracle PartnerNetwork (OPN) Exchange There were more partner attendees than ever, with Oracle citing somewhere around 5000. But the format for partners this year was different. And it was better. Traditionally, Oracle hosts a one-day only Partner Forum on the Sunday before the customer-focused conference begins. This year, the partner content still began on the Sunday, but the worldwide alliances and channels group created an exclusive track throughout the week, just for partners. It featured content specifically targeted towards partners, and was anchored at a nearby hotel. This was a great move for Oracle. The Oracle PartnerNetwork (OPN) team has been in a tricky position for years in that they have enough partners that they need a landmark event in the year, but perhaps not enough to justify a separate, worldwide, large, partner-only event. Coinciding a four day event with Oracle OpenWorld, where anybody who's anybody in the Oracle world attends anyway, is a good solution. The channels leadership team can build from this success for an even better conference next year. It's expected that they will follow a similar strategy. Cloud Announcements for Partners As for the content, it was primarily about the Cloud. For customers, for VARs, for ISVs, for everyone. There were five key Cloud related announcements for partners at the event: Cloud Builder Specialization. This is one of the first broader Specializations that isn't focused on one unique product. It is a designation for partners that offer design and implementation services for private cloud solutions. As such, it will surely be something that nearly every partner will consider, and many will pursue. New Specializations for Cloud Services. Unlike the broad, almost "strategy-level" Specialization above, there are a group of new product-based "merit badges" for many of the new Cloud offerings. Think about a Specialization for the Cloud version of HCM, for instance. Each of these particular specializations will also have Rapid Start implementation methodologies that allow a partner to offer a fixed scope and fixed price bid to customers. Based on the learnings from Oracle Consulting, this means a partner might be able to deliver Cloud HCM in six weeks for a fixed price. In the end, this means more consistent experiences for Oracle customers. Cloud Resale Program. For those partners who achieve one of these Cloud Specializations, it will mean they can actually resell the subscription-based Cloud product. This is important because it has been somewhat of a rarity in the emerging Cloud channel for partners to be able to "take the paper", take the revenue, do the billing, be first line of support etc. This is an important step for Oracle and one the partners will be happy to see. Cloud Referral Program. For those partners who are not as engaged with these specific Cloud products that the Specializations revolve around, there is a new referral program that provides an incentive to recommend Oracle Cloud products. This one-two punch of referral and resale programs is similar in many ways to other vendors who allow more committed partners to resell, while more casual partners can collect fees. It's the model that seems to work. The key to allow a company to resell a subscription product - something that is inherently delivered directly between the vendor and customer - is trust. Achieving a specialization is a good bar to have to meet. Platform as a Service for ISVs. Leveraging some of the overall announcements made by CEO Larry Ellison around a cloud version of its famous database, Oracle also outlined a new ability for ISVs to build cloud services on its new PaaS offering. Details were less available for this announcement, though it's an expected and fitting play for ISVs comfortable with Oracle technology who can now more easily build out cloud applications. There wasn't much talk of an app store to go along with this, but surely it's in the works. Specializations And "The Gap" Coming back to Specializations, Oracle PartnerNetwork (OPN) has 4600 partners worldwide that hold 20,000 Specializations. These are impressive numbers just three years into the new OPN framework. The actual number of Specializations has also grown significantly, up to 111 today and soon around 125 or so with the new Cloud designations. Oracle may need to look at grouping some of these and creating higher level, broader designations that partners could achieve by earning several Specializations in that group. At 125 and growing, this is a lot. On the top of the pyramid, Hitachi Ltd. successfully became the eleventh partner to make it to the highly prestigious Diamond level. Partner programs partially exist in order to recognize capable partners. And it's more than abundantly clear that the Diamond level does this. But I think Oracle has a gap. Specializations show capability in a very specific product area, and all sizes of partners can achieve these. The next level at which to show a level of expertise is the Advanced Specialization. However, this is a massive step up from the regular Specialization. The advanced level requires 50 people to have certification in that particular product area. Most other industry programs have similar higher level statuses, but none are even close to that number. Whereas a customer who sees an Oracle partner with an advanced specialization can be very sure of capability, there is a gap in that there are hundreds or even thousands of 20-50 person solution providers who are top notch in their area of expertise. They will never get to Advanced due to numbers alone. These boutique partners don't really have a way of showing off their talents in the current program. Advanced may not need to be so high to really show that a company has deep expertise. Overall it was a very successful Oracle OpenWorld for Oracle partners of all sizes. There was progress made on making it a bigger and more relevant event. And also on catching up and maybe even leading in some cases with cloud opportunities for partners.

  Read the article

• WWDC and Tech Ed: A Tale of Two DevCons

  - by andrewbrust

  Next week marks the first full week of June.  Summer will feel in full swing and it will be a pretty big season for technology.  In seeming acknowledgement of that very fact, both Apple and Microsoft will be holding large developers conferences starting Monday.  Apple will hold its annual Worldwide Developers Conference (WWDC) in lovely San Francisco and Microsoft will hold its Tech Ed conference in muggy, oil-laden yet soulful New Orleans.  A brief survey of each show reveals much about the differences in each company’s offerings, strategy, and approach to customers and partners. In the interest of full disclosure, I must explain that I will be speaking at Microsoft’s Tech Ed show, and have done so, on and off, since 2003.  I have never been to an Apple conference and, as readers of this blog may know, I acquired my first ever Apple product 2 months ago when I bought an iPad on the day of that product’s launch.  I think I have keen insights into Microsoft’s conference.  My ability to comment on Apple’s event ranges somewhere between backseat driver and naive observer.  Just so you know. Although both shows cater to their respective company’s developers, there are a number of differences in the events’ purposes and content approaches.  First off, let’s consider each show as a news and PR vehicle.  WWDC will feature Steve Jobs’ keynote address and most likely will be where Apple officially reveals details of its 4th-generation iPhone. Jobs will likely also provide deep background information on the corresponding iPhone OS release.  These presumed announcements will make the show a magnet for the tech press and tech blogger elite.  Apple’s customers will be interested too, especially since the iPhone OS release will likely be made available to owners of existing iPhone, iPod Touch and iPad devices. Tech Ed, on the other hand, may not be especially newsworthy at all.  The keynote address will be given by Bob Muglia, who is President of the company’s Server and Tools Division, and he’ll likely be reviewing things more than previewing them. That’s because the company has, in the last 6-8 months, already released new versions of a majority of its products, including Windows, Office, SharePoint, SQL Server, Exchange, its Azure cloud platform, its .NET software development layer, its Silverlight Rich Internet Application (RIA) technology and its Visual Studio developer suite.  Redmond’s product pipeline has functioned more like a firehose of late, and the company has a ton of work to do to get developers up to speed on everything that’s new. I know I keep saying “developers,” but in Tech Ed’s case, that’s not really accurate.  In North America, Tech Ed caters to both developers and IT pros (i.e. technologists who work with physical IT infrastructure, as well as security and administration of the server software that runs on it).  This pairing has, since its inception, struck some as anomalous and others, including many exhibitors, as very smart. Certainly, it means Tech Ed ends up being a confab for virtually all professionals in Microsoft’s ecosystem.  And this year, Microsoft’s Business Intelligence (BI) conference will be co-located with Tech Ed, further enhancing that fusion effect. Clearly then, Microsoft’s show will focus on education, as its name assures us.  Apple’s will serve as both a press event and an opportunity to get its own App Store developer channel synced up with its newest technology advances.  For example, we already know that iPhone OS 4.0 will provide for a limited multitasking capability; that will only work well if people know how to code to it in a capable way.  Apple also told us its iAd advertising platform will be part of the new OS, and Steve Jobs insists that’s to provide a revenue opportunity for developers.  This too, then, needs to be explicated and soaked up buy the faithful. A look at each show’s breakout session lineup provides some interesting takeaways.  WWDC will have very few Mac-specific sessions on offer, and virtually no sessions that at are IT- or “Enterprise-“ related.  It’s all about the phone, music players and tablets.  However, WWDC will have plenty of low-level, hardcore tech coverage of such things as Advanced Memory Analysis and Creating Secure Applications, as well as lots of rich media-related content like Core Animation and Game Design and Development.  Beyond Apple’s proprietary platform, WWDC will also feature an array of sessions on HTML 5 and other Web standards.  In all, WWDC offers over 100 technical sessions and hands-on labs. What about Tech Ed’s editorial content?  Like the target audience, it really runs the gamut.  The show has 21 tracks (versus WWDC’s 5) and more than 745 “learning opportunities” which include breakout sessions, demo stations, hands-on labs and BIrds of a Feather discussion sessions.  Topics range from Architecture talks like Patterns of Parallel Programming to cloud computing talks like Building High Capacity Compute Applications with Windows Azure to IT-focused topics like Virtualization of Microsoft SharePoint 2010 Farm Architecture.  I also count 19 sessions on Windows Phone 7.  Unfortunately, with regard to Web standards and HTML 5, only a few sessions are offered, all of them specific to Internet Explorer. All-in-all, Apple’s show looks more exciting and “sexier” than Tech Ed. Microsoft’s show seems a lot more enterprise-focused than WWDC. This is, of course, well in sync with each company’s approach and products.  Microsoft’s content is much wider ranging and bests WWDC in sheer volume of sessions and labs.  I suppose some might argue that less is more; others that Apple’s consumer-focused offerings simply don’t provide for the same depth of coverage to a business audience.  Microsoft has a serious focus on the cloud and  a paucity of coverage on client-side Web standards; Apple has virtually no cloud offering at all.  Again, this reflects each tech titan’s go-to-market strategy. My own take is that employees of each company should attend the other’s event.  The amount of mutual exclusivity in content may make sense in terms of corporate philosophy, but the reality is that each company could stand to diversify into the other’s territory, at least somewhat. My own talk at Tech Ed will focus on competitive analysis around Microsoft’s BI products.  Apple does not today figure into that analysis. Maybe one day it will.

  Read the article

• So, how is the Oracle HCM Cloud User Experience? In a word, smokin’!

  - by Edith Mireles-Oracle

  By Misha Vaughan, Oracle Applications User Experience Oracle unveiled its game-changing cloud user experience strategy at Oracle OpenWorld 2013 (remember that?) with a new simplified user interface (UI) paradigm.  The Oracle HCM cloud user experience is about light-weight interaction, tailored to the task you are trying to accomplish, on the device you are comfortable working with. A key theme for the Oracle user experience is being able to move from smartphone to tablet to desktop, with all of your data in the cloud. The Oracle HCM Cloud user experience provides designs for better productivity, no matter when and how your employees need to work. Release 8  Oracle recently demonstrated how fast it is moving development forward for our cloud applications, with the availability of release 8.  In release 8, users will see expanded simplicity in the HCM cloud user experience, such as filling out a time card and succession planning. Oracle has also expanded its mobile capabilities with task flows for payslips, managing absences, and advanced analytics. In addition, users will see expanded extensibility with the new structures editor for simplified pages, and the with the user interface text editor, which allows you to update language throughout the UI from one place. If you don’t like calling people who work for you “employees,” you can use this tool to create a term that is suited to your business.  Take a look yourself at what’s available now. What are people saying?Debra Lilley (@debralilley), an Oracle ACE Director who has a long history with Oracle Applications, recently gave her perspective on release 8: “Having had the privilege of seeing a preview of release 8, I am again impressed with the enhancements around simplified UI. Even more so, at a user group event in London this week, an existing Cloud HCM customer speaking publically about his implementation said he was very excited about release 8 as the absence functionality was so superior and simple to use.”  In an interview with Lilley for a blog post by Dennis Howlett  (@dahowlett), we probably couldn’t have asked for a more even-handed look at the Oracle Applications Cloud and the impact of user experience. Take the time to watch all three videos and get the full picture.  In closing, Howlett’s said: “There is always the caveat that getting from the past to Fusion [from the editor: Fusion is now called the Oracle Applications Cloud] is not quite as simple as may be painted, but the outcomes are much better than anticipated in large measure because the user experience is so much better than what went before.” Herman Slange, Technical Manager with Oracle Applications partner Profource, agrees with that comment. “We use on-premise Financials & HCM for internal use. Having a simple user interface that works on a desktop as well as a tablet for (very) non-technical users is a big relief. Coming from E-Business Suite, there is less training (none) required to access HCM content.  From a technical point of view, having the abilities to tailor the simplified UI very easy makes it very efficient for us to adjust to specific customer needs.  When we have a conversation about simplified UI, we just hand over a tablet and ask the customer to just use it. No training and no explanation required.” Finally, in a story by Computer Weekly  about Oracle customer BG Group, a natural gas exploration and production company based in the UK and with a presence in 20 countries, the author states: “The new HR platform has proved to be easier and more intuitive for HR staff to use than the previous SAP-based technology.” What’s Next for Oracle’s Applications Cloud User Experiences? This is the question that Steve Miranda, Oracle Executive Vice President, Applications Development, asks the Applications User Experience team, and we’ve been hard at work for some time now on “what’s next.”  I can’t say too much about it, but I can tell you that we’ve started talking to customers and partners, under non-disclosure agreements, about user experience concepts that we are working on in order to get their feedback. We recently had a chance to talk about possibilities for the Oracle HCM Cloud user experience at an Oracle HCM Southern California Customer Success Summit. This was a fantastic event, hosted by Shane Bliss and Vance Morossi of the Oracle Client Success Team. We got to use the uber-slick facilities of Allergan, our hosts (of Botox fame), headquartered in Irvine, Calif., with a presence in more than 100 countries. Photo by Misha Vaughan, Oracle Applications User Experience Vance Morossi, left, and Shane Bliss, of the Oracle Client Success Team, at an Oracle HCM Southern California Customer Success Summit.  We were treated to a few really excellent talks around human resources (HR). Alice White, VP Human Resources, discussed Allergan's process for global talent acquisition -- how Allergan has designed and deployed a global process, and global tools, along with Oracle and Cognizant, and are now at the end of a global implementation. She shared a couple of insights about the journey for Allergan: “One of the major areas for improvement was on role clarification within the company.” She said the company is “empowering managers and deputizing them as recruiters. Now it is a global process that is nimble and efficient."  Deepak Rammohan, VP Product Management, HCM Cloud, Oracle, also took the stage to talk about pioneering modern HR. He reflected modern HR problems of getting the right data about the workforce, the importance of getting the right talent as a key strategic initiative, and other workforce insights. "How do we design systems to deal with all of this?” he asked. “Make sure the systems are talent-centric. The next piece is collaborative, engaging, and mobile. A lot of this is influenced by what users see today. The last thing is around insight; insight at the point of decision-making." Rammohan showed off some killer HCM Cloud talent demos focused on simplicity and mobility that his team has been cooking up, and closed with a great line about the nature of modern recruiting: "Recruiting is a team sport." Deepak Rammohan, left, and Jake Kuramoto, both of Oracle, debate the merits of a Google Glass concept demo for recruiters on-the-go. Later, in an expo-style format, the Apps UX team showed several concepts for next-generation HCM Cloud user experiences, including demos shown by Jake Kuramoto (@jkuramoto) of The AppsLab, and Aylin Uysal (@aylinuysal), Director, HCM Cloud user experience. We even hauled out our eye-tracker, a research tool used to show where the eye is looking at a particular screen, thanks to teammate Michael LaDuke. Dionne Healy, HCM Client Executive, and Aylin Uysal, Director, HCM Cloud user experiences, Oracle, take a look at new HCM Cloud UX concepts. We closed the day with Jeremy Ashley (@jrwashley), VP, Applications User Experience, who brought it all back together by talking about the big picture for applications cloud user experiences. He covered the trends we are paying attention to now, what users will be expecting of their modern enterprise apps, and what Oracle’s design strategy is around these ideas.   We closed with an excellent reception hosted by ADP Payroll services at Bistango. Want to read more?Want to see where our cloud user experience is going next? Read more on the UsableApps web site about our latest design initiative: “Glance, Scan, Commit.” Or catch up on the back story by looking over our Applications Cloud user experience content on the UsableApps web site.  You can also find out where we’ll be next at the Events page on UsableApps.

  Read the article

• Company Review: Google Products

  Google, Inc offers an array of products and services to all of its end-users. However their search capabilities are the foundation for Google’s current success and their primary business focus. Currently, Google offers over twenty different search applications that allow users to search the internet for books, maps, videos, images, products and much more. Their product decisions have allowed users demands to be met while focusing on the free based model. This allows users to access Google data free of charge and indirectly gives Google a strong competitive advantage of other competitors along with the accuracy of the search results. According to Google, Inc, they offer the following types of searching capabilities: Alerts Get email updates on the topics of your choice Blog Search Find blogs on your favorite topics  Books Search the full text of books  Custom Search Create a customized search experience for your community  Desktop Search and personalize your computer  Dictionary Search for definitions of words and phrases Directory Search the web, organized by topic or category Earth Explore the world from your computer Finance Business info, news and interactive charts GOOG-411 Find and connect for free with businesses from your phone  Images Search for images on the web Maps View maps and directions News Search thousands of news stories Patent Search Search the full text of US Patents Product Search Search for stuff to buy Scholar Search scholarly papers Toolbar Add a search box to your browser Trends Explore past and present search trends Videos Search for videos on the web Web Search Search billions of web pages Web Search Features Find movies, music, stocks, books and more mapping Google’s free based business model is only one way it differentiates itself from its competition. There is also a strong focus on the accuracy of search results and the speed in which they are returned to the end-user. Quality function deployment (QFD) is a structured method used to help connect user needs to the design features of a project proposed to address those needs. This method is particularly useful in accounting for needs that are not easily articulated or precisely defined according to the U. S. Department of Transportation Federal Highway Administration. Due to the fact that QFD is so customer driven Google is always in a constant state of change in attempt to reengineer its search algorithms, and other dependant systems so that end-users requirements are constantly being met. Value engineering is a key example of this, Google is constantly trying to improve all aspects of its products, improve system maintainability, and system interoperability. Bridgefield Group defines value engineering as an organized methodology that identifies and selects the lowest lifecycle cost options in design, materials and processes that achieves the desired level of performance, reliability and customer satisfaction. In addition, it seeks to remove unnecessary costs in the above areas and is often a joint effort with cross-functional internal teams and relevant suppliers. Common issues that appear when developing large scale systems like Google’s search applications include modular design of a product and/or service and providing accurate value analysis. A design approach that adheres to four fundamental tenets of cohesiveness, encapsulation, self-containment, and high binding to design a system component as an independently operable unit subject to change is how the Open System Joint Task Force defines modular design. More specifically M. S. Schmaltz defines modular software design as having a large collection of statements strung together in one partition of in-line code; we segment or divide the statements into logical groups called modules. Each module performs one or two tasks, and then passes control to another module. By breaking up the code into "bite-sized chunks", so to speak, we are able to better control the flow of data and control. This is especially true in large software systems. Value analysis is a process to evaluate products and services based on effectiveness, safety, and cost. Value analysis involves assessing the quality as well as the cost of a product or service as defined by the Healthcare Financial Management Association.  “Operations Management deals with the design and management of products, processes, services and supply chains. It considers the acquisition, development, and utilization of resources that firms need to deliver the goods and services their clients want.” (MIT,2010) Google, Inc encourages an open environment between all employees, also known as Googlers. This is reinforced by a cross-section team or cross-functional teams comprised from multiple departments assigned to every project so that every department like marketing, finance, and quality assurance has input on every project. In addition, Google is known for their openness to new ideas regardless of the status or seniority of an employee. In fact, Google allows for 20% of an employee’s time can be devoted to developing new ideas and/or pet projects. HumTech.com defines a cross-functional team as a collection of people with varied levels of skills and experience brought together to accomplish a task. As the name implies, Cross-Functional Team members come from different organizational units. Cross-Functional Teams may be permanent or ad hoc. Google’s search application product strategy primarily focuses on mass customization. This is allows Google to create a base search application and allows results to be returned to the end-users quickly based on specific parameters and search settings. In addition, they also store the data that is returned in case other desire the same results based on other end-users supplying the same customized settings. This allows Google to appear to render search results in virtually real-time to the user while allowing for complete customization of the searching criteria. Greg Vogl, a professor at Uganda Martyrs University, defines mass customization as when a business gives its customers the opportunity to tailor its products or services to the customer's specifications. The IT staff at Google play a key role in ensuring that the search application’s product strategy is maintained simply because the IT staff designs, develops, and maintains all of their proprietary applications. In fact, they also maintain all network infrastructure to ensure that it is available to all end-users. References: http://www.google.com/intl/en/options/ http://ops.fhwa.dot.gov/freight/publications/ftat_user_guide/sec5.htm http://www.bridgefieldgroup.com/bridgefieldgroup/glos9.htm#V http://www.acq.osd.mil/osjtf/termsdef.html http://www.cise.ufl.edu/~mssz/Pascal-CGS2462/prog-dsn.html http://www.hfma.org/publications/business_caring_newsletter/exclusives/Supply+and+Inventory+Terms+Defined.htm http://mitsloan.mit.edu/omg/om-definition.php http://www.humtech.com/opm/grtl/ols/ols3.cfm http://www.gregvogl.net/courses/mis1/glossary.htm

  Read the article

• High CPU usage with Team Speak 3.0.0-rc2

  - by AlexTheBird

  The CPU usage is always around 40 percent. I use push-to-talk and I had uninstalled pulseaudio. Now I use Alsa. I don't even have to connect to a Server. By simply starting TS the cpu usage goes up 40 percent and stays there. The CPU usage of 3.0.0-rc1 [Build: 14468] is constantly 14 percent. This is the output of top, mpstat and ps aux while I am running TS3 ... of course: alexandros@alexandros-laptop:~$ top top - 18:20:07 up 2:22, 3 users, load average: 1.02, 0.85, 0.77 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie Cpu(s): 5.3%us, 1.9%sy, 0.1%ni, 91.8%id, 0.7%wa, 0.1%hi, 0.1%si, 0.0%st Mem: 2061344k total, 964028k used, 1097316k free, 69116k buffers Swap: 3997688k total, 0k used, 3997688k free, 449032k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2714 alexandr 20 0 206m 31m 24m S 37 1.6 0:12.78 ts3client_linux 868 root 20 0 47564 27m 10m S 8 1.4 3:21.73 Xorg 1 root 20 0 2804 1660 1204 S 0 0.1 0:00.53 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.01 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.45 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.08 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:01.17 events/0 10 root 20 0 0 0 0 S 0 0.0 0:00.81 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 14 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.00 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.05 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.99 ata/0 26 root 20 0 0 0 0 S 0 0.0 0:00.92 ata/1 27 root 20 0 0 0 0 S 0 0.0 0:00.00 ata_aux 28 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 29 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd alexandros@alexandros-laptop:~$ mpstat Linux 2.6.32-32-generic (alexandros-laptop) 16.06.2011 _i686_ (2 CPU) 18:20:15 CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle 18:20:15 all 5,36 0,09 1,91 0,68 0,07 0,06 0,00 0,00 91,83 alexandros@alexandros-laptop:~$ ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 2804 1660 ? Ss 15:58 0:00 /sbin/init root 2 0.0 0.0 0 0 ? S 15:58 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S 15:58 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S 15:58 0:00 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S 15:58 0:00 [watchdog/0] root 6 0.0 0.0 0 0 ? S 15:58 0:00 [migration/1] root 7 0.0 0.0 0 0 ? S 15:58 0:00 [ksoftirqd/1] root 8 0.0 0.0 0 0 ? S 15:58 0:00 [watchdog/1] root 9 0.0 0.0 0 0 ? S 15:58 0:01 [events/0] root 10 0.0 0.0 0 0 ? S 15:58 0:00 [events/1] root 11 0.0 0.0 0 0 ? S 15:58 0:00 [cpuset] root 12 0.0 0.0 0 0 ? S 15:58 0:00 [khelper] root 13 0.0 0.0 0 0 ? S 15:58 0:00 [async/mgr] root 14 0.0 0.0 0 0 ? S 15:58 0:00 [pm] root 16 0.0 0.0 0 0 ? S 15:58 0:00 [sync_supers] root 17 0.0 0.0 0 0 ? S 15:58 0:00 [bdi-default] root 18 0.0 0.0 0 0 ? S 15:58 0:00 [kintegrityd/0] root 19 0.0 0.0 0 0 ? S 15:58 0:00 [kintegrityd/1] root 20 0.0 0.0 0 0 ? S 15:58 0:00 [kblockd/0] root 21 0.0 0.0 0 0 ? S 15:58 0:00 [kblockd/1] root 22 0.0 0.0 0 0 ? S 15:58 0:00 [kacpid] root 23 0.0 0.0 0 0 ? S 15:58 0:00 [kacpi_notify] root 24 0.0 0.0 0 0 ? S 15:58 0:00 [kacpi_hotplug] root 25 0.0 0.0 0 0 ? S 15:58 0:00 [ata/0] root 26 0.0 0.0 0 0 ? S 15:58 0:00 [ata/1] root 27 0.0 0.0 0 0 ? S 15:58 0:00 [ata_aux] root 28 0.0 0.0 0 0 ? S 15:58 0:00 [ksuspend_usbd] root 29 0.0 0.0 0 0 ? S 15:58 0:00 [khubd] root 30 0.0 0.0 0 0 ? S 15:58 0:00 [kseriod] root 31 0.0 0.0 0 0 ? S 15:58 0:00 [kmmcd] root 34 0.0 0.0 0 0 ? S 15:58 0:00 [khungtaskd] root 35 0.0 0.0 0 0 ? S 15:58 0:00 [kswapd0] root 36 0.0 0.0 0 0 ? SN 15:58 0:00 [ksmd] root 37 0.0 0.0 0 0 ? S 15:58 0:00 [aio/0] root 38 0.0 0.0 0 0 ? S 15:58 0:00 [aio/1] root 39 0.0 0.0 0 0 ? S 15:58 0:00 [ecryptfs-kthrea] root 40 0.0 0.0 0 0 ? S 15:58 0:00 [crypto/0] root 41 0.0 0.0 0 0 ? S 15:58 0:00 [crypto/1] root 48 0.0 0.0 0 0 ? S 15:58 0:03 [scsi_eh_0] root 50 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_1] root 53 0.0 0.0 0 0 ? S 15:58 0:00 [kstriped] root 54 0.0 0.0 0 0 ? S 15:58 0:00 [kmpathd/0] root 55 0.0 0.0 0 0 ? S 15:58 0:00 [kmpathd/1] root 56 0.0 0.0 0 0 ? S 15:58 0:00 [kmpath_handlerd] root 57 0.0 0.0 0 0 ? S 15:58 0:00 [ksnapd] root 58 0.0 0.0 0 0 ? S 15:58 0:03 [kondemand/0] root 59 0.0 0.0 0 0 ? S 15:58 0:02 [kondemand/1] root 60 0.0 0.0 0 0 ? S 15:58 0:00 [kconservative/0] root 61 0.0 0.0 0 0 ? S 15:58 0:00 [kconservative/1] root 213 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_2] root 222 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_3] root 234 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_4] root 235 0.0 0.0 0 0 ? S 15:58 0:01 [usb-storage] root 255 0.0 0.0 0 0 ? S 15:58 0:00 [jbd2/sda5-8] root 256 0.0 0.0 0 0 ? S 15:58 0:00 [ext4-dio-unwrit] root 257 0.0 0.0 0 0 ? S 15:58 0:00 [ext4-dio-unwrit] root 290 0.0 0.0 0 0 ? S 15:58 0:00 [flush-8:0] root 318 0.0 0.0 2316 888 ? S 15:58 0:00 upstart-udev-bridge --daemon root 321 0.0 0.0 2616 1024 ? S<s 15:58 0:00 udevd --daemon root 526 0.0 0.0 0 0 ? S 15:58 0:00 [kpsmoused] root 528 0.0 0.0 0 0 ? S 15:58 0:00 [led_workqueue] root 650 0.0 0.0 0 0 ? S 15:58 0:00 [radeon/0] root 651 0.0 0.0 0 0 ? S 15:58 0:00 [radeon/1] root 652 0.0 0.0 0 0 ? S 15:58 0:00 [ttm_swap] root 654 0.0 0.0 2612 984 ? S< 15:58 0:00 udevd --daemon root 656 0.0 0.0 0 0 ? S 15:58 0:00 [hd-audio0] root 657 0.0 0.0 2612 916 ? S< 15:58 0:00 udevd --daemon root 674 0.6 0.0 0 0 ? S 15:58 0:57 [phy0] syslog 715 0.0 0.0 34812 1776 ? Sl 15:58 0:00 rsyslogd -c4 102 731 0.0 0.0 3236 1512 ? Ss 15:58 0:02 dbus-daemon --system --fork root 740 0.0 0.1 19088 3380 ? Ssl 15:58 0:00 gdm-binary root 744 0.0 0.1 18900 4032 ? Ssl 15:58 0:01 NetworkManager avahi 749 0.0 0.0 2928 1520 ? S 15:58 0:00 avahi-daemon: running [alexandros-laptop.local] avahi 752 0.0 0.0 2928 544 ? Ss 15:58 0:00 avahi-daemon: chroot helper root 753 0.0 0.1 4172 2300 ? S 15:58 0:00 /usr/sbin/modem-manager root 762 0.0 0.1 20584 3152 ? Sl 15:58 0:00 /usr/sbin/console-kit-daemon --no-daemon root 836 0.0 0.1 20856 3864 ? Sl 15:58 0:00 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Display1 root 856 0.0 0.1 4836 2388 ? S 15:58 0:00 /sbin/wpa_supplicant -u -s root 868 2.3 1.3 36932 27924 tty7 Rs+ 15:58 3:22 /usr/bin/X :0 -nr -verbose -auth /var/run/gdm/auth-for-gdm-a46T4j/database -nolisten root 891 0.0 0.0 1792 564 tty4 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty4 root 901 0.0 0.0 1792 564 tty5 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty5 root 908 0.0 0.0 1792 564 tty2 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty2 root 910 0.0 0.0 1792 568 tty3 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty3 root 913 0.0 0.0 1792 564 tty6 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty6 root 917 0.0 0.0 2180 1072 ? Ss 15:58 0:00 acpid -c /etc/acpi/events -s /var/run/acpid.socket daemon 924 0.0 0.0 2248 432 ? Ss 15:58 0:00 atd root 927 0.0 0.0 2376 900 ? Ss 15:58 0:00 cron root 950 0.0 0.0 11736 1372 ? Ss 15:58 0:00 /usr/sbin/winbindd root 958 0.0 0.0 11736 1184 ? S 15:58 0:00 /usr/sbin/winbindd root 974 0.0 0.1 6832 2580 ? Ss 15:58 0:00 /usr/sbin/cupsd -C /etc/cups/cupsd.conf root 1078 0.0 0.0 1792 564 tty1 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty1 gdm 1097 0.0 0.0 3392 772 ? S 15:58 0:00 /usr/bin/dbus-launch --exit-with-session root 1112 0.0 0.1 19216 3292 ? Sl 15:58 0:00 /usr/lib/gdm/gdm-session-worker root 1116 0.0 0.1 5540 2932 ? S 15:58 0:01 /usr/lib/upower/upowerd root 1131 0.0 0.1 6308 3824 ? S 15:58 0:00 /usr/lib/policykit-1/polkitd 108 1163 0.0 0.2 16788 4360 ? Ssl 15:58 0:01 /usr/sbin/hald root 1164 0.0 0.0 3536 1300 ? S 15:58 0:00 hald-runner root 1188 0.0 0.0 3612 1256 ? S 15:58 0:00 hald-addon-input: Listening on /dev/input/event6 /dev/input/event5 /dev/input/event2 root 1194 0.0 0.0 3612 1224 ? S 15:58 0:00 /usr/lib/hal/hald-addon-rfkill-killswitch root 1200 0.0 0.0 3608 1240 ? S 15:58 0:00 /usr/lib/hal/hald-addon-generic-backlight root 1202 0.0 0.0 3616 1236 ? S 15:58 0:02 hald-addon-storage: polling /dev/sr0 (every 2 sec) root 1204 0.0 0.0 3616 1236 ? S 15:58 0:00 hald-addon-storage: polling /dev/sdb (every 2 sec) root 1211 0.0 0.0 3624 1220 ? S 15:58 0:00 /usr/lib/hal/hald-addon-cpufreq 108 1212 0.0 0.0 3420 1200 ? S 15:58 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 1000 1222 0.0 0.1 24196 2816 ? Sl 15:58 0:00 /usr/bin/gnome-keyring-daemon --daemonize --login 1000 1240 0.0 0.3 28228 7312 ? Ssl 15:58 0:00 gnome-session 1000 1274 0.0 0.0 3284 356 ? Ss 15:58 0:00 /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session gnome-session 1000 1277 0.0 0.0 3392 772 ? S 15:58 0:00 /usr/bin/dbus-launch --exit-with-session gnome-session 1000 1278 0.0 0.0 3160 1652 ? Ss 15:58 0:00 /bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 1000 1281 0.0 0.2 8172 4636 ? S 15:58 0:00 /usr/lib/libgconf2-4/gconfd-2 1000 1287 0.0 0.5 24228 10896 ? Ss 15:58 0:03 /usr/lib/gnome-settings-daemon/gnome-settings-daemon 1000 1290 0.0 0.1 6468 2364 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd 1000 1293 0.0 0.6 38104 13004 ? S 15:58 0:03 metacity 1000 1296 0.0 0.1 30280 2628 ? Ssl 15:58 0:00 /usr/lib/gvfs//gvfs-fuse-daemon /home/alexandros/.gvfs 1000 1301 0.0 0.0 3344 988 ? S 15:58 0:03 syndaemon -i 0.5 -k 1000 1303 0.0 0.1 8060 3488 ? S 15:58 0:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor root 1306 0.0 0.1 15692 3104 ? Sl 15:58 0:00 /usr/lib/udisks/udisks-daemon 1000 1307 0.4 1.0 50748 21684 ? S 15:58 0:34 python -u /usr/share/screenlets/DigiClock/DigiClockScreenlet.py 1000 1308 0.0 0.9 35608 18564 ? S 15:58 0:00 python /usr/share/screenlets-manager/screenlets-daemon.py 1000 1309 0.0 0.3 19524 6468 ? S 15:58 0:00 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 1000 1311 0.0 0.5 37412 11788 ? S 15:58 0:01 gnome-power-manager 1000 1312 0.0 1.0 50772 22628 ? S 15:58 0:03 gnome-panel 1000 1313 0.1 1.5 102648 31184 ? Sl 15:58 0:10 nautilus root 1314 0.0 0.0 5188 996 ? S 15:58 0:02 udisks-daemon: polling /dev/sdb /dev/sr0 1000 1315 0.0 0.6 51948 12464 ? SL 15:58 0:01 nm-applet --sm-disable 1000 1317 0.0 0.1 16956 2364 ? Sl 15:58 0:00 /usr/lib/gvfs/gvfs-afc-volume-monitor 1000 1318 0.0 0.3 20164 7792 ? S 15:58 0:00 bluetooth-applet 1000 1321 0.0 0.1 7260 2384 ? S 15:58 0:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor 1000 1323 0.0 0.5 37436 12124 ? S 15:58 0:00 /usr/lib/notify-osd/notify-osd 1000 1324 0.0 1.9 197928 40456 ? Ssl 15:58 0:06 /home/alexandros/.dropbox-dist/dropbox 1000 1329 0.0 0.3 20136 7968 ? S 15:58 0:00 /usr/bin/gnome-screensaver --no-daemon 1000 1331 0.0 0.1 7056 3112 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-trash --spawner :1.6 /org/gtk/gvfs/exec_spaw/0 root 1340 0.0 0.0 2236 1008 ? S 15:58 0:00 /sbin/dhclient -d -sf /usr/lib/NetworkManager/nm-dhcp-client.action -pf /var/run/dhcl 1000 1348 0.0 0.1 42252 3680 ? Ssl 15:58 0:00 /usr/lib/bonobo-activation/bonobo-activation-server --ac-activate --ior-output-fd=19 1000 1384 0.0 1.7 80244 35480 ? Sl 15:58 0:02 /usr/bin/python /usr/lib/deskbar-applet/deskbar-applet/deskbar-applet --oaf-activate- 1000 1388 0.0 0.5 26196 11804 ? S 15:58 0:01 /usr/lib/gnome-panel/wnck-applet --oaf-activate-iid=OAFIID:GNOME_Wncklet_Factory --oa 1000 1393 0.1 0.5 25876 11548 ? S 15:58 0:08 /usr/lib/gnome-applets/multiload-applet-2 --oaf-activate-iid=OAFIID:GNOME_MultiLoadAp 1000 1394 0.0 0.5 25600 11140 ? S 15:58 0:03 /usr/lib/gnome-applets/cpufreq-applet --oaf-activate-iid=OAFIID:GNOME_CPUFreqApplet_F 1000 1415 0.0 0.5 39192 11156 ? S 15:58 0:01 /usr/lib/gnome-power-manager/gnome-inhibit-applet --oaf-activate-iid=OAFIID:GNOME_Inh 1000 1417 0.0 0.7 53544 15488 ? Sl 15:58 0:00 /usr/lib/gnome-applets/mixer_applet2 --oaf-activate-iid=OAFIID:GNOME_MixerApplet_Fact 1000 1419 0.0 0.4 23816 9068 ? S 15:58 0:00 /usr/lib/gnome-panel/notification-area-applet --oaf-activate-iid=OAFIID:GNOME_Notific 1000 1488 0.0 0.3 20964 7548 ? S 15:58 0:00 /usr/lib/gnome-disk-utility/gdu-notification-daemon 1000 1490 0.0 0.1 6608 2484 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-burn --spawner :1.6 /org/gtk/gvfs/exec_spaw/1 1000 1510 0.0 0.1 6348 2084 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-metadata 1000 1531 0.0 0.3 19472 6616 ? S 15:58 0:00 /usr/lib/gnome-user-share/gnome-user-share 1000 1535 0.0 0.4 77128 8392 ? Sl 15:58 0:00 /usr/lib/evolution/evolution-data-server-2.28 --oaf-activate-iid=OAFIID:GNOME_Evoluti 1000 1601 0.0 0.5 69576 11800 ? Sl 15:59 0:00 /usr/lib/evolution/2.28/evolution-alarm-notify 1000 1604 0.0 0.7 33924 15888 ? S 15:59 0:00 python /usr/share/system-config-printer/applet.py 1000 1701 0.0 0.5 37116 11968 ? S 15:59 0:00 update-notifier 1000 1892 4.5 7.0 406720 145312 ? Sl 17:11 3:09 /opt/google/chrome/chrome 1000 1896 0.0 0.1 69812 3680 ? S 17:11 0:02 /opt/google/chrome/chrome 1000 1898 0.0 0.6 91420 14080 ? S 17:11 0:00 /opt/google/chrome/chrome --type=zygote 1000 1916 0.2 1.3 140780 27220 ? Sl 17:11 0:12 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1918 0.7 1.8 155720 37912 ? Sl 17:11 0:31 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1921 0.0 1.0 135904 21052 ? Sl 17:11 0:02 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1927 6.5 3.6 194604 74960 ? Sl 17:11 4:32 /opt/google/chrome/chrome --type=renderer --disable-client-side-phishing-detection -- 1000 2156 0.4 0.7 48344 14896 ? Rl 18:03 0:04 gnome-terminal 1000 2157 0.0 0.0 1988 712 ? S 18:03 0:00 gnome-pty-helper 1000 2158 0.0 0.1 6504 3860 pts/0 Ss 18:03 0:00 bash 1000 2564 0.2 0.1 6624 3984 pts/1 Ss+ 18:17 0:00 bash 1000 2711 0.0 0.0 4208 1352 ? S 18:19 0:00 /bin/bash /home/alexandros/Programme/TeamSpeak3-Client-linux_x86_back/ts3client_runsc 1000 2714 36.5 1.5 210872 31960 ? SLl 18:19 0:18 ./ts3client_linux_x86 1000 2743 0.0 0.0 2716 1068 pts/0 R+ 18:20 0:00 ps aux Output of vmstat: alexandros@alexandros-laptop:~$ vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 1093324 69840 449496 0 0 27 10 476 667 6 2 91 1 Output of lsusb alexandros@alexandros-laptop:~$ lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon X2300 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) The Team Speak log file : 2011-06-19 19:04:04.223522|INFO | | | Logging started, clientlib version: 3.0.0-rc2 [Build: 14642] 2011-06-19 19:04:04.761149|ERROR |SoundBckndIntf| | /home/alexandros/Programme/TeamSpeak3-Client-linux_x86_back/soundbackends/libpulseaudio_linux_x86.so error: NOT_CONNECTED 2011-06-19 19:04:05.871770|INFO |ClientUI | | Failed to init text to speech engine 2011-06-19 19:04:05.894623|INFO |ClientUI | | TeamSpeak 3 client version: 3.0.0-rc2 [Build: 14642] 2011-06-19 19:04:05.895421|INFO |ClientUI | | Qt version: 4.7.2 2011-06-19 19:04:05.895571|INFO |ClientUI | | Using configuration location: /home/alexandros/.ts3client/ts3clientui_qt.conf 2011-06-19 19:04:06.559596|INFO |ClientUI | | Last update check was: Sa. Jun 18 00:08:43 2011 2011-06-19 19:04:06.560506|INFO | | | Checking for updates... 2011-06-19 19:04:07.357869|INFO | | | Update check, my version: 14642, latest version: 14642 2011-06-19 19:05:52.978481|INFO |PreProSpeex | 1| Speex version: 1.2rc1 2011-06-19 19:05:54.055347|INFO |UIHelpers | | setClientVolumeModifier: 10 -8 2011-06-19 19:05:54.057196|INFO |UIHelpers | | setClientVolumeModifier: 11 2 Thanks for taking the time to read my message. UPDATE: Thanks to nickguletskii's link I googled for "alsa cpu usage" (without quotes) and it brought me to a forum. A user wrote that by directly selecting the hardware with "plughw:x.x" won't impact the performance of the system. I have selected it in the TS 3 configuration and it worked. But this solution is not optimal because now no other program can access the sound output. If you need any further information or my question is unclear than please tell me.

  Read the article

• Script to establish SSH tunnel and then run another program that uses the tunnel

  - by Rob Hills

  I am running a GUI app (Gnucash) that connects to a remote Postgres database via a secure shell session. I can use the SSH -L command to tunnel a local port and then separately run Gnucash and this works fine. What I'd like to do is use a single shell script that sets up the tunnel and then calls Gnucash. Is that possible? If so, how do I do it? Currently, I run commands like the following in 2 separate terminal windows: ssh -L 5433:127.0.0.1:19097 [email protected] gnucash postgres://gnucash@localhost:5433/gnucash_db If I simply put both lines in a shell script, the first line drops me into the remote shell and the second line doesn't execute until I exit the remote shell. TIA, Rob Hills

  Read the article

• What is start_daemon?

  - by David Parks

  I'm trying to understand start_daemon in the following /etc/init.d/nagios-nrpe-server startup script: start) if [ "$INETD" = 1 ]; then exit 1 fi log_daemon_msg "Starting $DESC" "$NAME" start_daemon -p $PIDDIR/nrpe.pid $NICENESS $DAEMON -c $CONFIG -d $DAEMON_OPTS log_end_msg $? ;; In particular, when I start this service it isn't writing a PID file as expected, thus the stop service nagios-nrpe-server command is not working (I need to manually kill the processes). I'm trying to figure out how to trouble shoot the problem, but I can't run start_daemon ... from the command line. I want to reproduce what the script is doing manually so I can work on what the problem is.

  Read the article

• Ubuntu 11.10 cannot boot, gets stuck at BusyBox

  - by Ivan Dokov

  I am using Ubuntu 11.10. An hour ago I had my laptop Sony Vaio VPCEB1S1E running. I saw there are updates to install and I installed them. I turned off the laptop and now when I turn it on it loads until BusyBox v1.18.4 appears. I've seen suggestions for solving this on askubuntu. I booted Puppy Linux from USB and repaired the partition where the Ubuntu is installed. I rebooted but it did not help. I saw other suggestions like writing "exit" at the BusyBox prompt. This didn't help either. I love the Ubuntu OS, but these days I get problems like this while booting. The last times I could repair it with GParted, but then it wasn't a problem with BusyBox, it was some other error, like "cannot boot /". The same problem had occurred on Ubuntu 10.10 and there I had repaired it with GParted.

  Read the article

• Record and Play your WebLogic Console Tasks Like a DVR

  - by james.bayer

  Automation using WebLogic Scripting Tool Today on the Oracle internal mailing list for WebLogic Server questions someone asked how to automate the configuration of the thread model for WebLogic Server and they were having trouble with the jython scripting syntax.  I’ve previously written about this feature called Work Managers and the associated constraints.  However, I did not show how to automate the process of configuring this without the console using WebLogic Scripting Tool – the jython scripting automation environment abbreviated as WLST.  I’ve written some very basic introductions to WLST before and there is also an Oracle By Example on the subject, but this is a bit more advanced.  Fear not because there is a really easy-to-use feature of the WLS console that lets you “Record” user actions just like a DVR.  Using these recordings of the web-based console, you can easily create a script even if you are unfamiliar with the WLST syntax and API.  I’m a big fan of both DVR’s and automation as can be evidenced with this old Halloween picture taken during simpler times.  Obviously the Cast Away and The Big Labowski references show some age.  I was a big Tivo fan-boy back in the day and I still think it’s the best DVR. I strongly believe that WebLogic Scripting Tool (WLST) is an absolutely essential tool for automating administration tasks in anything beyond a development environment.  Even in development environments you can make a case that it makes sense to start the automation for environments downstream.  I promise you that once you start using it for any tasks that you do even semi-regularly, you won’t go back to clicking through the console.  It’s simply so much more efficient and less error-prone to run a script. Let’s say you need to create a Work Manager and MaxThreadsConstraint – the easy way to do it is configure it in the WLS console first while capturing the commands with a recording.  See the images for the simple steps – click to enlarge. Record Console Configurations to a File Review the Recordings and Make Slight Modifications In order to make the recorded .py file directly callable as a stand-alone script I added calls to the connect() and edit() functions at the beginning and calls to disconnect() and exit() at the end – otherwise the main section of the script was provided by the console recording.  Below is the resulting file I saved as d:/temp/wm.py connect('weblogic','welcome1', 't3://localhost:7001') edit() startEdit()   cd('/SelfTuning/wl_server') cmo.createMaxThreadsConstraint('MaxThreadsConstraint-0')   cd('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName)) cmo.setCount(5) cmo.unSet('ConnectionPoolName')   cd('/SelfTuning/wl_server') cmo.createWorkManager('WorkManager-0') cd('/SelfTuning/wl_server/WorkManagers/WorkManager-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName))   cmo.setMaxThreadsConstraint(getMBean('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0')) cmo.setIgnoreStuckThreads(false)   activate() disconnect() exit() Run the Script If you want to test it be sure to delete the Work Manager and MaxThreadConstraint that you had previously created in the console.  Do something like the following - set up the environment and tell WLST to execute the script which happens in the first 2 lines, the rest doesn’t require any user input: D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server\bin>setDomainEnv.cmd D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server>java weblogic.WLST d:\temp\wm.py   Initializing WebLogic Scripting Tool (WLST) ...   Welcome to WebLogic Server Administration Scripting Shell   Type help() for help on available commands   Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'examplesServer' that belongs to domain 'wl_server'.   Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead.   Location changed to edit tree. This is a writable tree with DomainMBean as the root. To make changes you will need to start an edit session via startEdit().   For more help, use help(edit)   Starting an edit session ... Started edit session, please be sure to save and activate your changes once you are done. Activating all your changes, this may take a while ... The edit lock associated with this edit session is released once the activation is completed. Activation completed Disconnected from weblogic server: examplesServer     Exiting WebLogic Scripting Tool.   Now if you go back and look in the console the changes have been made and we now have a compete script.  Of course there is a full MBean reference and you can learn the nuances of jython and WLST, but why not the WLS console do most of the work for you!  Happy scripting.

  Read the article

• How to get 32 bit version of libraries on Ubuntu 64 bit?

  - by Olivier Lalonde

  I'm trying to compile a program which uses Google's V8 library (which is 32 bit). Therefore any library I use within my program also has to be 32 bit. Where can I download the 32 bit version of libraries on Ubuntu 64 bit? More specifically, I'm looking for the libnotify 32 bit version. This is the errors I am getting right now: g++ -o shell -m32 shell.o -L../v8 -lv8 -lpthread `pkg-config --libs libnotify glib-2.0` /usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.4.3/../../../libnotify.so when searching for -lnotify /usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-linux-gnu/4.4.3/../../../libnotify.a when searching for -lnotify /usr/bin/ld: skipping incompatible /usr/lib/libnotify.so when searching for -lnotify /usr/bin/ld: skipping incompatible /usr/lib/libnotify.a when searching for -lnotify /usr/bin/ld: cannot find -lnotify collect2: ld returned 1 exit status Thanks!

  Read the article

• SEO effect of “You are leaving this site” page for outbound links?

  - by Timo Huovinen

  The problem I am working on an aggregation website that collects reviews about specific products from various websites. The site has many thousands of outbound links (with "nofollow" attributes) to the content source websites where the reviews were collected from. The site has far more outbound links than inbound links and I have read that this is bad for SEO. The question Would adding an intermediate «You are leaving this site» disclaimer/warning page like this hurt search engine rankings? And can you provide any links about this topic? p.s. The exit page would be a POST form instead of a script, that notifies the user that he/she is leaving this site and provides a button to continue to the other website. p.p.s This kind of idea is implemented on many forums, aggregation websites with the purpose of warning the user that he/she is leaving this site and to block search engine bots from following those links because search bots do not submit forms.

  Read the article

• I cannot read second internal HD

  - by Nathan

  I reformatted my Win "C" drive and loaded Ubuntu 11.04. The second internal HD of course is not read. It is shown in 'disk utility'. I try to mount it in disk utility but I get an error message error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sda1 is already mounted on / One problem I see is the error relates to sda1, but I am trying to mount sdb. Unfortunately, I am windows literate and ignorant of the coding for linux. Can someone help me with the code to mount my second drive (sdb) Nathan

  Read the article

• Howto install google-mock on Ubuntu 12.10

  - by user1459339

  I am having hard time trying to install Google C++ Mocking Framework. I have successfully run sudo apt-get install google-mock. Then I tried to compile this sample file #include "gmock/gmock.h" int main(int argc, char** argv) { ::testing::InitGoogleMock(&argc, argv); return RUN_ALL_TESTS(); } with g++ -lgmock main.cpp and these errors have shown main.cpp:(.text+0x1e): undefined reference to `testing::InitGoogleMock(int*, char**)' main.cpp:(.text+0x23): undefined reference to `testing::UnitTest::GetInstance()' main.cpp:(.text+0x2b): undefined reference to `testing::UnitTest::Run()' collect2: error: ld returned 1 exit status I guess the linker can not find the library files. Does anybody know how to fix this?

  Read the article

• how to install g77 on ubuntu 12.04

  - by ubuntu-beginner

  I want a workin g77 compiler on my Ubuntu 12.04 64 bit laptop. so did the following: 1. I change the sources.list by adding the following lines: deb http...hu.archive.ubuntu.com/ubuntu/ hardy universe deb-src ..//hu.archive.ubuntu.com/ubuntu/ hardy universe deb http:...hu.archive.ubuntu.com/ubuntu/ hardy-updates universe deb-src ..//hu.archive.ubuntu.com/ubuntu/ hardy-updates universe then I on a terminal i did the following: sudo apt-get update sudo apt-get install g77 Things looked very nice then. But when I tried to compile with g77 on my Fortran77 program. I got the following errors: /usr/bin/ld: cannot find crt1.o: No such file or directory /usr/bin/ld: cannot find crti.o: No such file or directory /usr/bin/ld: cannot find -lgcc_s collect2: ld returned 1 exit status Why doesn't the g77 work properly. Many people need g77 why cannot Ubuntu offer a workable g77 ? Please Help me ! Thanks from a ubuntu-beginner

  Read the article

• The final Cumulative Update for SQL Server 2008 SP3

  - by AaronBertrand

  Microsoft has released the final Cumulative Update (#17) for SQL Server 2008 Service Pack 3. Build # 10.00.5861 KB Article: KB #2958696 9 public fixes Relevant for builds 10.00.5500 -> 10.00.5860 NOT for SQL Server 2008 R2 (10.50.xxxx) Once more, this is the last cumulative update for SQL Server 2008. Both 2008 and 2008 R2 exit mainstream support in July of this year. That's two months away. If you want a final service pack for either or both of these major versions, and want your voice heard,...(read more)

  Read the article

• Can't Boot, video drivers or x-server problem?

  - by ZacharyH

  I was uninstalling some programs that I installed to try and get my iPod touch working with Ubuntu (I gave up on that) when ubuntu just crashed. Now after I choose ubuntu in GRUB, it gives me a screen that says "Ubuntu is running in low-graphics mode: your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself" It was working just fine before I started to uninstall those programs. I think that I might have uninstalled something necessary to the system. If I click OK on the screen, it gives me options to reconfigure, troubleshoot, exit to console, or restart X. But no matter what I choose I still can't boot into ubuntu - I get stuck looking at the splash screen which stalls forever. I was receiving support from one of my mate's and he was doing something with the LiveCD, and now the message doesn't pop up any more, I just get stuck at a never ending splash screen. Any help would be appreciated, thanks!

  Read the article

• User is trying to leave! Set at-least confirm alert on browser(tab) close event!!

  - by kaushalparik27

  This is something that might be annoying or irritating for end user. Obviously, It's impossible to prevent end user from closing the/any browser. Just think of this if it becomes possible!!!. That will be a horrible web world where everytime you will be attacked by sites and they will not allow to close your browser until you confirm your shopping cart and do the payment. LOL:) You need to open the task manager and might have to kill the running browser exe processes.Anyways; Jokes apart, but I have one situation where I need to alert/confirm from the user in any anyway when they try to close the browser or change the url. Think of this: You are creating a single page intranet asp.net application where your employee can enter/select their TDS/Investment Declarations and you wish to at-least ALERT/CONFIRM them if they are attempting to:[1] Close the Browser[2] Close the Browser Tab[3] Attempt to go some other site by Changing the urlwithout completing/freezing their declaration.So, Finally requirement is clear. I need to alert/confirm the user what he is going to do on above bulleted events. I am going to use window.onbeforeunload event to set the javascript confirm alert box to appear.    <script language="JavaScript" type="text/javascript">        window.onbeforeunload = confirmExit;        function confirmExit() {            return "You are about to exit the system before freezing your declaration! If you leave now and never return to freeze your declaration; then they will not go into effect and you may lose tax deduction, Are you sure you want to leave now?";        }    </script>See! you are halfway done!. So, every time browser unloads the page, above confirm alert causes to appear on front of user like below:By saying here "every time browser unloads the page"; I mean to say that whenever page loads or postback happens the browser onbeforeunload event will be executed. So, event a button submit or a link submit which causes page to postback would tend to execute the browser onbeforeunload event to fire!So, now the hurdle is how can we prevent the alert "Not to show when page is being postback" via any button/link submit? Answer is JQuery :)Idea is, you just need to set the script reference src to jQuery library and Set the window.onbeforeunload event to null when any input/link causes a page to postback.Below will be the complete code:<head runat="server">    <title></title>    <script src="jquery.min.js" type="text/javascript"></script>    <script language="JavaScript" type="text/javascript">        window.onbeforeunload = confirmExit;        function confirmExit() {            return "You are about to exit the system before freezing your declaration! If you leave now and never return to freeze your declaration; then they will not go into effect and you may lose tax deduction, Are you sure you want to leave now?";        }        $(function() {            $("a").click(function() {                window.onbeforeunload = null;            });            $("input").click(function() {                window.onbeforeunload = null;            });        });    </script></head><body>    <form id="form1" runat="server">    <div></div>    </form></body></html>So, By this post I have tried to set the confirm alert if user try to close the browser/tab or try leave the site by changing the url. I have attached a working example with this post here. I hope someone might find it helpful.

  Read the article

• European Interoperability Framework - a new beginning?

  - by trond-arne.undheim

  The most controversial document in the history of the European Commission's IT policy is out. EIF is here, wrapped in the Communication "Towards interoperability for European public services", and including the new feature European Interoperability Strategy (EIS), arguably a higher strategic take on the same topic. Leaving EIS aside for a moment, the EIF controversy has been around IPR, defining open standards and about the proper terminology around standardization deliverables. Today, as the document finally emerges, what is the verdict? First of all, to be fair to those among you who do not spend your lives in the intricate labyrinths of Commission IT policy documents on interoperability, let's define what we are talking about. According to the Communication: "An interoperability framework is an agreed approach to interoperability for organisations that want to collaborate to provide joint delivery of public services. Within its scope of applicability, it specifies common elements such as vocabulary, concepts, principles, policies, guidelines, recommendations, standards, specifications and practices." The Good - EIF reconfirms that "The Digital Agenda can only take off if interoperability based on standards and open platforms is ensured" and also confirms that "The positive effect of open specifications is also demonstrated by the Internet ecosystem." - EIF takes a productive and pragmatic stance on openness: "In the context of the EIF, openness is the willingness of persons, organisations or other members of a community of interest to share knowledge and stimulate debate within that community, the ultimate goal being to advance knowledge and the use of this knowledge to solve problems" (p.11). "If the openness principle is applied in full: - All stakeholders have the same possibility of contributing to the development of the specification and public review is part of the decision-making process; - The specification is available for everybody to study; - Intellectual property rights related to the specification are licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software" (p. 26). - EIF is a formal Commission document. The former EIF 1.0 was a semi-formal deliverable from the PEGSCO, a working group of Member State representatives. - EIF tackles interoperability head-on and takes a clear stance: "Recommendation 22. When establishing European public services, public administrations should prefer open specifications, taking due account of the coverage of functional needs, maturity and market support." - The Commission will continue to support the National Interoperability Framework Observatory (NIFO), reconfirming the importance of coordinating such approaches across borders. - The Commission will align its internal interoperability strategy with the EIS through the eCommission initiative. - One cannot stress the importance of using open standards enough, whether in the context of open source or non-open source software. The EIF seems to have picked up on this fact: What does the EIF says about the relation between open specifications and open source software? The EIF introduces, as one of the characteristics of an open specification, the requirement that IPRs related to the specification have to be licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software. In this way, companies working under various business models can compete on an equal footing when providing solutions to public administrations while administrations that implement the standard in their own software (software that they own) can share such software with others under an open source licence if they so decide. - EIF is now among the center pieces of the Digital Agenda (even though this demands extensive inter-agency coordination in the Commission): "The EIS and the EIF will be maintained under the ISA Programme and kept in line with the results of other relevant Digital Agenda actions on interoperability and standards such as the ones on the reform of rules on implementation of ICT standards in Europe to allow use of certain ICT fora and consortia standards, on issuing guidelines on essential intellectual property rights and licensing conditions in standard-setting, including for ex-ante disclosure, and on providing guidance on the link between ICT standardisation and public procurement to help public authorities to use standards to promote efficiency and reduce lock-in.(Communication, p.7)" All in all, quite a few good things have happened to the document in the two years it has been on the shelf or was being re-written, depending on your perspective, in any case, awaiting the storms to calm. The Bad - While a certain pragmatism is required, and governments cannot migrate to full openness overnight, EIF gives a bit too much room for governments not to apply the openness principle in full. Plenty of reasons are given, which should maybe have been put as challenges to be overcome: "However, public administrations may decide to use less open specifications, if open specifications do not exist or do not meet functional interoperability needs. In all cases, specifications should be mature and sufficiently supported by the market, except if used in the context of creating innovative solutions". - EIF does not use the internationally established terminology: open standards. Rather, the EIF introduces the notion of "formalised specification". How do "formalised specifications" relate to "standards"? According to the FAQ provided: The word "standard" has a specific meaning in Europe as defined by Directive 98/34/EC. Only technical specifications approved by a recognised standardisation body can be called a standard. Many ICT systems rely on the use of specifications developed by other organisations such as a forum or consortium. The EIF introduces the notion of "formalised specification", which is either a standard pursuant to Directive 98/34/EC or a specification established by ICT fora and consortia. The term "open specification" used in the EIF, on the one hand, avoids terminological confusion with the Directive and, on the other, states the main features that comply with the basic principle of openness laid down in the EIF for European Public Services. Well, this may be somewhat true, but in reality, Europe is 30 year behind in terminology. Unless the European Standardization Reform gets completed in the next few months, most Member States will likely conclude that they will go on referencing and using standards beyond those created by the three European endorsed monopolists of standardization, CEN, CENELEC and ETSI. Who can afford to begin following the strict Brussels rules for what they can call open standards when, in reality, standards stemming from global standardization organizations, so-called fora/consortia, dominate in the IT industry. What exactly is EIF saying? Does it encourage Member States to go on using non-ESO standards as long as they call it something else? I guess I am all for it, although it is a bit cumbersome, no? Why was there so much interest around the EIF? The FAQ attempts to explain: Some Member States have begun to adopt policies to achieve interoperability for their public services. These actions have had a significant impact on the ecosystem built around the provision of such services, e.g. providers of ICT goods and services, standardisation bodies, industry fora and consortia, etc... The Commission identified a clear need for action at European level to ensure that actions by individual Member States would not create new electronic barriers that would hinder the development of interoperable European public services. As a result, all stakeholders involved in the delivery of electronic public services in Europe have expressed their opinions on how to increase interoperability for public services provided by the different public administrations in Europe. Well, it does not take two years to read 50 consultation documents, and the EU Standardization Reform is not yet completed, so, more pragmatically, you finally had to release the document. Ok, let's leave some of that aside because the document is out and some people are happy (and others definitely not). The Verdict Considering the controversy, the delays, the lobbying, and the interests at stake both in the EU, in Member States and among vendors large and small, this document is pretty impressive. As with a good wine that has not yet come to full maturity, let's say that it seems to be coming in in the 85-88/100 range, but only a more fine-grained analysis, enjoyment in good company, and ultimately, implementation, will tell. The European Commission has today adopted a significant interoperability initiative to encourage public administrations across the EU to maximise the social and economic potential of information and communication technologies. Today, we should rally around this achievement. Tomorrow, let's sit down and figure out what it means for the future.

  Read the article

• Ubuntu 11.10 cannot boot. It stucks at BusyBox

  - by Ivan Dokov

  I am using Ubuntu 11.10. An hour ago I had my laptop Sony Vaio VPCEB1S1E running. I saw there are updates to install and I installed them. Turned off the laptop and now when I want to turn it on. It loads until BusyBox v1.18.4 appear. I've saw what the people suggest in other askubuntu topics. I've booted Puppy Linux from USB, repaired the partition where the Ubuntu is installed. Rebooted and nothing changed. I saw other suggestions like writing "exit" in the command line when the BusyBox comes. This didn't help neither. I love the Ubuntu OS, but these days I get similar problem with not able to boot OS. The last times I could repair it with Gparted, but then it wasn't problem with the BusyBox, it was something missing in the OS, like "cannot boot /". The same problem occurred on an older version of Ubuntu 10.10 and there I've repaired it again with Gparted.

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >