Search Results

Search found 30046 results on 1202 pages for 'linq via c series'.

Page 106/1202 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• What is the best Handbrake preset for playing video files on Tivo Series 3

  - by deadprogrammer

  I have Mac2Tivo app running, and I can put video files on Tivo. Tivo supposedly supports avi and various other encoding, but half the time video's don't play. I'm pretty sure this has something to do with encoding options. So the question is, what is a good Handbrake preset to use for viewing stuff on Tivo?

  Read the article

• Hyper-V Server 2012 with Zambezi AMD FX-Series - Hardware assisted virtualization not present

  - by Vazgen

  I'm trying to set up VDI across Windows Server 2012 VMs running on Hyper-V 2012. The wizard's compatibility check for the Virtualization Host server failed with "Hardware-assisted virtualization is not present on the server". I'm running an FX-8120 CPU and have the ASUS M5A97 motherboard. I know I'm supposed to enable No-Execute (Hyper-V Hardware Considerations) but I cannot find that or any other synonyms of it in my motherboards UEFI BIOS (NX, XD, EVP, XN... nothing). I found this: PAE/NX/SSE2 Support Requirement Guide for Windows 8 which in short says "Windows 8 and Windows Server 2012 requires that systems must have processors that support NX, and NX must be turned on for important security safeguards to function effectively and avoid potential security vulnerabilities." this leads me to believe NX is on by default if I was able to get this far and install Hyper-V 2012 and Windows Server 2012.. Also I tried to disable AVX in cmd with "bcdedit /set xsavedisable 1". Did not resolve My processor is Zambezi FX-8120 and also supports RVI/SLAT/other synonym: processor: Newegg Processor FX-8120 support proof: AMD Processors with Rapid Virtualization Indexing Required to Run Hyper-V in Windows 8 What's going on here? I bought this CPU specifically after I had the same problems with an older AMD Athelon II and made sure to buy one with AMD-V and RVI. Thank you

  Read the article

• Communication Between Your PC and Azure VM via Windows Azure Connect

  - by Shaun

  With the new release of the Windows Azure platform there are a lot of new features available. In my previous post I introduced a little bit about one of them, the remote desktop access to azure virtual machine. Now I would like to talk about another cool stuff – Windows Azure Connect.   What’s Windows Azure Connect I would like to quote the definition of the Windows Azure Connect in MSDN With Windows Azure Connect, you can use a simple user interface to configure IP-sec protected connections between computers or virtual machines (VMs) in your organization’s network, and roles running in Windows Azure. IP-sec protects communications over Internet Protocol (IP) networks through the use of cryptographic security services. There’s an image available at the MSDN as well that I would like to forward here As we can see, using the Windows Azure Connect the Worker Role 1 and Web Role 1 are connected with the development machines and database servers which some of them are inside the organization some are not. With the Windows Azure Connect, the roles deployed on the cloud could consume the resource which located inside our Intranet or anywhere in the world. That means the roles can connect to the local database, access the local shared resource such as share files, folders and printers, etc.   Difference between Windows Azure Connect and AppFabric It seems that the Windows Azure Connect are duplicated with the Windows Azure AppFabric. Both of them are aiming to solve the problem on how to communication between the resource in the cloud and inside the local network. The table below lists the differences in my understanding. Category Windows Azure Connect Windows Azure AppFabric Purpose An IP-sec connection between the local machines and azure roles. An application service running on the cloud. Connectivity IP-sec, Domain-joint Net Tcp, Http, Https Components Windows Azure Connect Driver Service Bus, Access Control, Caching Usage Azure roles connect to local database server Azure roles use local shared files,  folders and printers, etc. Azure roles join the local AD. Expose the local service to Internet. Move the authorization process to the cloud. Integrate with existing identities such as Live ID, Google ID, etc. with existing local services. Utilize the distributed cache.   And also some scenarios on which of them should be used. Scenario Connect AppFabric I have a service deployed in the Intranet and I want the people can use it from the Internet.   Y I have a website deployed on Azure and need to use a database which deployed inside the company. And I don’t want to expose the database to the Internet. Y   I have a service deployed in the Intranet and is using AD authorization. I have a website deployed on Azure which needs to use this service. Y   I have a service deployed in the Intranet and some people on the Internet can use it but need to be authorized and authenticated.   Y I have a service in Intranet, and a website deployed on Azure. This service can be used from Internet and that website should be able to use it as well by AD authorization for more functionalities. Y Y   How to Enable Windows Azure Connect OK we talked a lot information about the Windows Azure Connect and differences with the Windows Azure AppFabric. Now let’s see how to enable and use the Windows Azure Connect. First of all, since this feature is in CTP stage we should apply before use it. On the Windows Azure Portal we can see our CTP features status under Home, Beta Program page. You can send the apply to join the Beta Programs to Microsoft in this page. After a few days the Microsoft will send an email to you (the email of your Live ID) when it’s available. In my case we can see that the Windows Azure Connect had been activated by Microsoft and then we can click the Connect button on top, or we can click the Virtual Network item from the left navigation bar.   The first thing we need, if it’s our first time to enter the Connect page, is to enable the Windows Azure Connect. After that we can see our Windows Azure Connect information in this page.   Add a Local Machine to Azure Connect As we explained below the Windows Azure Connect can make an IP-sec connection between the local machines and azure role instances. So that we firstly add a local machine into our Azure Connect. To do this we will click the Install Local Endpoint button on top and then the portal will give us an URL. Copy this URL to the machine we want to add and it will download the software to us. This software will be installed in the local machines which we want to join the Connect. After installed there will be a tray-icon appeared to indicate this machine had been joint our Connect. The local application will be refreshed to the Windows Azure Platform every 5 minutes but we can click the Refresh button to let it retrieve the latest status at once. Currently my local machine is ready for connect and we can see my machine in the Windows Azure Portal if we switched back to the portal and selected back Activated Endpoints node.   Add a Windows Azure Role to Azure Connect Let’s create a very simple azure project with a basic ASP.NET web role inside. To make it available on Windows Azure Connect we will open the azure project property of this role from the solution explorer in the Visual Studio, and select the Virtual Network tab, check the Activate Windows Azure Connect. The next step is to get the activation token from the Windows Azure Portal. In the same page there is a button named Get Activation Token. Click this button then the portal will display the token to me. We copied this token and pasted to the box in the Visual Studio tab. Then we deployed this application to azure. After completed the deployment we can see the role instance was listed in the Windows Azure Portal - Virtual Connect section.   Establish the Connect Group The final task is to create a connect group which contains the machines and role instances need to be connected each other. This can be done in the portal very easy. The machines and instances will NOT be connected until we created the group for them. The machines and instances can be used in one or more groups. In the Virtual Connect section click the Groups and Roles node from the left side navigation bar and clicked the Create Group button on top. This will bring up a dialog to us. What we need to do is to specify a group name, description; and then we need to select the local computers and azure role instances into this group. After the Azure Fabric updated the group setting we can see the groups and the endpoints in the page. And if we switch back to the local machine we can see that the tray-icon have been changed and the status turned connected. The Windows Azure Connect will update the group information every 5 minutes. If you find the status was still in Disconnected please right-click the tray-icon and select the Refresh menu to retrieve the latest group policy to make it connected.   Test the Azure Connect between the Local Machine and the Azure Role Instance Now our local machine and azure role instance had been connected. This means each of them can communication to others in IP level. For example we can open the SQL Server port so that our azure role can connect to it by using the machine name or the IP address. The Windows Azure Connect uses IPv6 to connect between the local machines and role instances. You can get the IP address from the Windows Azure Portal Virtual Network section when select an endpoint. I don’t want to take a full example for how to use the Connect but would like to have two very simple tests. The first one would be PING.   When a local machine and role instance are connected through the Windows Azure Connect we can PING any of them if we opened the ICMP protocol in the Filewall setting. To do this we need to run a command line before test. Open the command window on the local machine and the role instance, execute the command as following netsh advfirewall firewall add rule name="ICMPv6" dir=in action=allow enable=yes protocol=icmpv6 Thanks to Jason Chen, Patriek van Dorp, Anton Staykov and Steve Marx, they helped me to enable  the ICMPv6 setting. For the full discussion we made please visit here. You can use the Remote Desktop Access feature to logon the azure role instance. Please refer my previous blog post to get to know how to use the Remote Desktop Access in Windows Azure. Then we can PING the machine or the role instance by specifying its name. Below is the screen I PING my local machine from my azure instance. We can use the IPv6 address to PING each other as well. Like the image following I PING to my role instance from my local machine thought the IPv6 address.   Another example I would like to demonstrate here is folder sharing. I shared a folder in my local machine and then if we logged on the role instance we can see the folder content from the file explorer window.   Summary In this blog post I introduced about another new feature – Windows Azure Connect. With this feature our local resources and role instances (virtual machines) can be connected to each other. In this way we can make our azure application using our local stuff such as database servers, printers, etc. without expose them to Internet.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Cisco 800 series won't forward port

  - by sam

  Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

  Read the article

• Dig Deeper in Windows Defrag via Command Prompt

  - by Matthew Guay

  Windows users have learned over the years that they need to keep their computers defragmented to keep running at top speed.  While Windows Vista and 7 automatically defrag your disks, here’s some ways you can dig deeper into Windows Defragmenter Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Snowy Christmas House Personas Theme for Firefox The Mystic Underground Tunnel Wallpaper Ubunchu! – The Ubuntu Manga Available in Multiple Languages Breathe New Life into Your PlayStation 2 Peripherals by Hooking Them Up to Your Computer Move the Window Control Buttons to the Left Side in Windows Fun and Colorful Firefox Theme for Windows 7

  Read the article

• Connecting to MSP430 via /dev/ttyACM0

  - by speciousfool

  I'd like some suggestions about how to fix garbled serial output from a device connected on /dev/ttyACM0. Lately I've been working on a development project making use of TI's MSP430 microcontroller (specifically the eZ430-RF2560). Over on this thread you can see we've been testing some code and have found that the output of the microcontroller over serial is garbled. The btstack provides simple counter test program. When we run the program and look at the serial port output using PuTTY on Windows 7 we see: rfcomm_send_internal cid 117 doesn't exist! BTstack counter 26230 rfcomm_send_internal cid 117 doesn't exist! BTstack counter 26231 However if we connect from various Ubuntu clients we get something like: Stt.R. BTacn 0 BTacn 002BTacn 0 BTcct 04BTtacoe 5BTacun My current belief is that this is because the device is being detected by cdc_acm as a generic USB ACM device. Another thread about a similar microcontroller suggests that the device should use a specific usb serial driver. We've verified that the module is compiled on our system and did a "modprobe ti_usb_3410_5052" but this had no effect on cdc_acm. Here is the relevant section of the kernel's debug log: [ 2735.092987] usb 2-1.2: new full speed USB device number 5 using ehci_hcd [ 2735.213655] cdc_acm 2-1.2:1.0: This device cannot do calls on its own. It is not a modem. [ 2735.213669] cdc_acm 2-1.2:1.0: No union descriptor, testing for castrated device [ 2735.213720] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device [ 2745.241996] generic-usb 0003:0451:F432.0003: usb_submit_urb(ctrl) failed [ 2745.242023] generic-usb 0003:0451:F432.0003: timeout initializing reports [ 2745.242401] generic-usb 0003:0451:F432.0003: hiddev0,hidraw0: USB HID v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on usb-0000:00:1d.0-1.2/input1 So, in summary, we'd like to figure out how to properly connect to this device. Also of use may be the appropriate place to file a bug report.

  Read the article

• Extracting the Date from a DateTime in Entity Framework 4 and LINQ

  - by Ken Cox [MVP]

  In my current ASP.NET 4 project, I’m displaying dates in a GridDateTimeColumn of Telerik’s ASP.NET Radgrid control. I don’t care about the time stuff, so my DataFormatString shows only the date bits: <telerik:GridDateTimeColumn FilterControlWidth="100px"   DataField="DateCreated" HeaderText="Created"    SortExpression="DateCreated" ReadOnly="True"    UniqueName="DateCreated" PickerType="DatePicker"    DataFormatString="{0:dd MMM yy}"> My problem was that I couldn’t get the built-in column filtering (it uses Telerik’s DatePicker control) to behave.  The DatePicker assumes that the time is 00:00:00 but the data would have times like 09:22:21. So, when you select a date and apply the EqualTo filter, you get no results. You would get results if all the time portions were 00:00:00. In essence, I wanted my Entity Framework query to give the DatePicker what it wanted… a Date without the Time portion. Fortunately, EF4 provides the TruncateTime  function. After you include Imports System.Data.Objects.EntityFunctions You’ll find that your EF queries will accept the TruncateTime function. Here’s my routine: Protected Sub RadGrid1_NeedDataSource _     (ByVal source As Object, _      ByVal e As Telerik.Web.UI.GridNeedDataSourceEventArgs) _     Handles RadGrid1.NeedDataSource     Dim ent As New OfficeBookDBEntities1     Dim TopBOMs = From t In ent.TopBom, i In ent.Items _                   Where t.BusActivityID = busActivityID _       And i.BusActivityID And t.ItemID = i.RecordID _       Order By t.DateUpdated Descending _       Select New With {.TopBomID = t.TopBomID, .ItemID = t.ItemID, _                        .PartNumber = i.PartNumber, _                        .Description = i.Description, .Notes = t.Notes, _                        .DateCreated = TruncateTime(t.DateCreated), _                        .DateUpdated = TruncateTime(t.DateUpdated)}     RadGrid1.DataSource = TopBOMs End Sub Now when I select March 14, 2011 on the DatePicker, the filter doesn’t stumble on time values that don’t make sense. Full Disclosure: Telerik gives me (and other developer MVPs) free copies of their suite.

  Read the article

• Share IIS and related information via IIS Community Newsletter WIKI

  - by steve schofield

  Trying something different!  Do you have something to share with the IIS community?  Are you an IIS community leader wanting to share your info?  Do you run a local usergroup and want to let others know!  Sign-up for our WIKI @ http://www.iislogs.com/wiki/   The information will be reviewed and potentially included in the IIS Community Newsletter.  Cheers, Steve SchofieldMicrosoft MVP - IIS  

  Read the article

• VPN - Cisco 2800 Series Router and Cisco ASA

  - by NickToyota

  What I currently have: Windows 2003/2008 servers supporting a 150 user environment. Linksys RV082 Router (HQ) and RV042 (satellite) routers Site to Site VPN Tunneling to 5 satellite (< 10 user) offices What I need: End-user VPN allowing myself and users to connect remotely to my network I need to replace our current routers and have been recommended the 2811 Router. Can this router alone be enough to get what I need (VPN tunnelling for users and site to site VPN) or will I require purchasing an additional ASA appliance?

  Read the article

• Implementing algorithms via compute shaders vs. pipeline shaders

  - by TravisG

  With the availability of compute shaders for both DirectX and OpenGL it's now possible to implement many algorithms without going through the rasterization pipeline and instead use general purpose computing on the GPU to solve the problem. For some algorithms this seems to become the intuitive canonical solution because they're inherently not rasterization based, and rasterization-based shaders seemed to be a workaround to harness GPU power (simple example: creating a noise texture. No quad needs to be rasterized here). Given an algorithm that can be implemented both ways, are there general (potential) performance benefits over using compute shaders vs. going the normal route? Are there drawbacks that we should watch out for (for example, is there some kind of unusual overhead to switching from/to compute shaders at runtime)? Are there perhaps other benefits or drawbacks to consider when choosing between the two?

  Read the article

• Generate a proper 404 page for blocked sites via /etc/hosts instead of redirect to localhost

  - by Mixhael

  I have blocked some websites by editing /etc/hosts and adding several newline-entries in the following manner: 0.0.0.0 www.domain.com And it works. The only thing is: when a website is visited which is blocked, the browser is redirected to my http://localhost, resulting in a directory listing or website-presentation that is running within my localhost root-environment. It's not a very big problem, but I prefer a standard error that mentions the website cannot be visited (for instance by a 404 page). Is this possible?

  Read the article

• how to access inaccessible mac os x hard drive via ubuntu

  - by jon

  Background: My intention was to load a Virtual Machine (VM) on my Mac OS X Snow Leopard. My Mac had just enough room for a VM (my thought process was that VM was the same as partition) However, I burned the newest version of Ubuntu onto a CD, thinking that partitioning and running a virtual machine would be the same. I would restart my computer, booting up Ubuntu installer. The installation would not allow me to partition, forcing me to force shutdown my laptop. when I turn on my laptop, I see that my computer is "missing operating system". So, can someone help me fix my a) bootcamp, b) getting files and if a and b are fixed c) to install ubuntu as a VM?

  Read the article

• Updating a SharePoint master page via a solution (WSP)

  - by Kelly Jones

  In my last blog post, I wrote how to deploy a SharePoint theme using Features and a solution package.  As promised in that post, here is how to update an already deployed master page. There are several ways to update a master page in SharePoint.  You could upload a new version to the master page gallery, or you could upload a new master page to the gallery, and then set the site to use this new page.  Manually uploading your master page to the master page gallery might be the best option, depending on your environment.  For my client, I did these steps in code, which is what they preferred. (Image courtesy of: http://www.joiningdots.net/blog/2007/08/sharepoint-and-quick-launch.html ) Before you decide which method you need to use, take a look at your existing pages.  Are they using the SharePoint dynamic token or the static token for the master page reference?  The wha, huh? SO, there are four ways to tell an .aspx page hosted in SharePoint which master page it should use: “~masterurl/default.master” – tells the page to use the default.master property of the site “~masterurl/custom.master” – tells the page to use the custom.master property of the site “~site/default.master” – tells the page to use the file named “default.master” in the site’s master page gallery “~sitecollection/default.master” – tells the page to use the file named “default.master” in the site collection’s master page gallery For more information about these tokens, take a look at this article on MSDN. Once you determine which token your existing pages are pointed to, then you know which file you need to update.  So, if the ~masterurl tokens are used, then you upload a new master page, either replacing the existing one or adding another one to the gallery.  If you’ve uploaded a new file with a new name, you’ll just need to set it as the master page either through the UI (MOSS only) or through code (MOSS or WSS Feature receiver code – or using SharePoint Designer). If the ~site or ~sitecollection tokens were used, then you’re limited to either replacing the existing master page, or editing all of your existing pages to point to another master page.  In most cases, it probably makes sense to just replace the master page. For my project, I’m working with WSS and the existing pages are set to the ~sitecollection token.  Based on this, I decided to just upload a new version of the existing master page (and not modify the dozens of existing pages). Also, since my client prefers Features and solutions, I created a master page Feature and a corresponding Feature Receiver.  For information on creating the elements and feature files, check out this post: http://sharepointmagazine.net/technical/development/deploying-the-master-page . This works fine, unless you are overwriting an existing master page, which was my case.  You’ll run into errors because the master page file needs to be checked out, replaced, and then checked in.  I wrote code in my Feature Activated event handler to accomplish these steps. Here are the steps necessary in code: Get the file name from the elements file of the Feature Check out the file from the master page gallery Upload the file to the master page gallery Check in the file to the master page gallery Here’s the code in my Feature Receiver: 1: public override void FeatureActivated(SPFeatureReceiverProperties properties) 2: { 3: try 4: { 5:   6: SPElementDefinitionCollection col = properties.Definition.GetElementDefinitions(System.Globalization.CultureInfo.CurrentCulture); 7:   8: using (SPWeb curweb = GetCurWeb(properties)) 9: { 10: foreach (SPElementDefinition ele in col) 11: { 12: if (string.Compare(ele.ElementType, "Module", true) == 0) 13: { 14: // <Module Name="DefaultMasterPage" List="116" Url="_catalogs/masterpage" RootWebOnly="FALSE"> 15: // <File Url="myMaster.master" Type="GhostableInLibrary" IgnoreIfAlreadyExists="TRUE" 16: // Path="MasterPages/myMaster.master" /> 17: // </Module> 18: string Url = ele.XmlDefinition.Attributes["Url"].Value; 19: foreach (System.Xml.XmlNode file in ele.XmlDefinition.ChildNodes) 20: { 21: string Url2 = file.Attributes["Url"].Value; 22: string Path = file.Attributes["Path"].Value; 23: string fileType = file.Attributes["Type"].Value; 24:   25: if (string.Compare(fileType, "GhostableInLibrary", true) == 0) 26: { 27: //Check out file in document library 28: SPFile existingFile = curweb.GetFile(Url + "/" + Url2); 29:   30: if (existingFile != null) 31: { 32: if (existingFile.CheckOutStatus != SPFile.SPCheckOutStatus.None) 33: { 34: throw new Exception("The master page file is already checked out. Please make sure the master page file is checked in, before activating this feature."); 35: } 36: else 37: { 38: existingFile.CheckOut(); 39: existingFile.Update(); 40: } 41: } 42:   43: //Upload file to document library 44: string filePath = System.IO.Path.Combine(properties.Definition.RootDirectory, Path); 45: string fileName = System.IO.Path.GetFileName(filePath); 46: char slash = Convert.ToChar("/"); 47: string[] folders = existingFile.ParentFolder.Url.Split(slash); 48:   49: if (folders.Length > 2) 50: { 51: Logger.logMessage("More than two folders were detected in the library path for the master page. Only two are supported.", 52: Logger.LogEntryType.Information); //custom logging component 53: } 54:   55: SPFolder myLibrary = curweb.Folders[folders[0]].SubFolders[folders[1]]; 56:   57: FileStream fs = File.OpenRead(filePath); 58:   59: SPFile newFile = myLibrary.Files.Add(fileName, fs, true); 60:   61: myLibrary.Update(); 62: newFile.CheckIn("Updated by Feature", SPCheckinType.MajorCheckIn); 63: newFile.Update(); 64: } 65: } 66: } 67: } 68: } 69: } 70: catch (Exception ex) 71: { 72: string msg = "Error occurred during feature activation"; 73: Logger.logException(ex, msg, ""); 74: } 75:   76: } 77:   78: /// <summary> 79: /// Using a Feature's properties, get a reference to the Current Web 80: /// </summary> 81: /// <param name="properties"></param> 82: public SPWeb GetCurWeb(SPFeatureReceiverProperties properties) 83: { 84: SPWeb curweb; 85:   86: //Check if the parent of the web is a site or a web 87: if (properties != null && properties.Feature.Parent.GetType().ToString() == "Microsoft.SharePoint.SPWeb") 88: { 89:   90: //Get web from parent 91: curweb = (SPWeb)properties.Feature.Parent; 92: 93: } 94: else 95: { 96: //Get web from Site 97: using (SPSite cursite = (SPSite)properties.Feature.Parent) 98: { 99: curweb = (SPWeb)cursite.OpenWeb(); 100: } 101: } 102:   103: return curweb; 104: } This did the trick.  It allowed me to update my existing master page, through an easily repeatable process (which is great when you are working with more than one environment and what to do things like TEST it!).  I did run into what I would classify as a strange issue with one of my subsites, but that’s the topic for another blog post.

  Read the article

• Inexpensive and Open replacement for Cisco Tunnel-based EasyVPN with Cisco VPN 3000 Series

  - by Shoaibi

  I have a scenario when i have to establish peer-to-peer preshared key based VPN to a vendor. This vendor uses Cisco EasyVPN with Cisco VPN 3000 as access concentrator. I check the compatibility of the type of VPN from http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps7180/prod_brochure0900aecd80582078.pdf and it appears that it would only work on cisco hardware. I am looking for a less inexpensive and possibly and open replacement to this to save my cost and also recommend to them. I have tried OpenVPN and thinking about vyatta.

  Read the article

• Cannot locate Ubuntu Software Center via Firefox to open APT links

  - by Bobby Phoenix

  I'm trying to locate where the Ubuntu Software Center is to choose as default for handling APT links in Firefox. I can click on the links, and I get the pop-up, but Ubuntu Software Center is not there. I tried to choose an application through Firefox's settings and through the pop-up, but I don't know the path. As you can see by my screen shot for the pop-up I chose the wrong one as that doesn't work. What is the correct path I need to select the correct file? EDIT - I added a fourth screen shot. I don't have it in that location. This is what I have. My view is in ABC order, and it's showing hidden files.

  Read the article

• InterVLAN routing on a HP V1910 series switch

  - by tintix

  Recently bought a HP V1910-16G switch (former 3com 29??) with IPv4 routing capabilities. After unpacking I did a firmware upgrade to the latest 5.20 Release 1513P06. I did set up additional VLANs (#2 and #3) and VLAN interfaces for those. The problem is that connected PCs on different VLAN's can't ping each other. Looks like VLAN routing doesn't even work. So here's my setup: VLAN ID VLAN interface 1 10.0.0.21/24 2 10.0.5.1/24 3 10.0.6.1/24 Have one PC connected to VLAN 2 (IP address 10.0.5.2, default gateway 10.0.5.1) and a second PC connected to VLAN 3 (IP address 10.0.6.2, default gateway 10.0.6.1) Routing table: Destination IP Mask Next Hop 0.0.0.0 0.0.0.0 10.0.0.1 10.0.0.0 255.255.255.0 10.0.0.21 10.0.0.21 255.255.255.255 127.0.0.1 10.0.5.0 255.255.255.0 10.0.5.1 10.0.5.1 255.255.255.255 127.0.0.1 10.0.6.0 255.255.255.0 10.0.6.1 10.0.6.1 255.255.255.255 127.0.0.1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 255.255.255.255 127.0.0.1 The first PC can't ping the second PC one and vice versa. They only can ping their own gateways and that's all. What I'm doing wrong?

  Read the article

• Determine web page draw time via a program

  - by Kevin Burke

  Google Chrome has a nice tool to determine the time the page begins drawing, in the Network tab in Developer Tools. Similarly sites like webpagetest.org can tell you the draw time and give you the whole waterfall of page loads for a given web page. I was wondering if I could automate the process of finding the time it took to the first page draw, for all of the pages on my site, so I can share this data within my company. Obviously the page draw time will depend on the latency and throughput of your connection, but I'm more concerned with the relative data about pages on our site. Can I get this data from Selenium or another tool? Thanks, Kevin

  Read the article

• Eliminating Network Clutter via a Unified Fabric: Cisco Talks FCoE

  Fibre Channel over Ethernet is on the rise, and Cisco is front and center in the push. Here's where it's driving.

  Read the article

• ObjectStorageHelper now available via nuget

  - by jamiet

  One of my numerous little side projects has recently been ObjectStorageHelper, a library that makes it easy to read/write files in WinRT (aka Windows 8) applications. This is a short post to let you know that ObjectStorageHelper is now available in the nuget gallery and hence can easily be added to your WinRT applications by running the following command in the nuget Package Manager Console: Massive thanks to Scott Lovegrove (@scottisafool) for helping me with this making this happen. To read more about ObjectStorageHelper and what it can do for you please visit Generic Object Storage Helper for WinRT on Codeplex. I know of four apps in the Windows Store that are currently making use of ObjectStorageHelper, they are: myScoreboard pro BO2 Create-a-Class MW3 Create-a-Class Ctrl-Alt-Del The following code shows how easy it is to store files using ObjectStorageHelper: and subsequently retrieve them: @Jamiet

  Read the article

• ObjectStorageHelper now available via nuget

  - by jamiet

  One of my numerous little side projects has recently been ObjectStorageHelper, a library that makes it easy to read/write files in WinRT (aka Windows 8) applications. This is a short post to let you know that ObjectStorageHelper is now available in the nuget gallery and hence can easily be added to your WinRT applications by running the following command in the nuget Package Manager Console: Massive thanks to Scott Lovegrove (@scottisafool) for helping me with this making this happen. To read more about ObjectStorageHelper and what it can do for you please visit Generic Object Storage Helper for WinRT on Codeplex. I know of four apps in the Windows Store that are currently making use of ObjectStorageHelper, they are: myScoreboard pro BO2 Create-a-Class MW3 Create-a-Class Ctrl-Alt-Del The following code shows how easy it is to store files using ObjectStorageHelper: and subsequently retrieve them: @Jamiet

  Read the article

• connect 2.1 stereo speakers to LG LCD-TV (5500 series)

  - by rMaero

  I bought a pair of speakers for my dad's TV, LG 32LE5500. When I installed them, it just sounded worse than the integrated ones and that's where I realized the subwoofer didn't work at all and both speakers make lower volume than the internal ones. The audio output jack says "H/P" (standing for headphones, and a matching symbol) before buying I checked this output with my phone's headphones and it worked so I figured it would work with a set of speakers since it's a standard audio output. I guess it's literally for headphones and not any other kind of sound players. There is only one other audio output and it is the optical-digital, so I can't use that. Not at least with these speakers.. am I screwed? or is there any workaround?

  Read the article

• Mocking successive calls of similar type via sequential mocking

  - by mehfuzh

  In this post , i show how you can benefit from  sequential mocking feature[In JustMock] for setting up expectations with successive calls of same type.  To start let’s first consider the following dummy database and entity class. public class Person {     public virtual string Name { get; set; }     public virtual int Age { get; set; } }   public interface IDataBase {     T Get<T>(); } Now, our test goal is to return different entity for successive calls on IDataBase.Get<T>(). By default, the behavior in JustMock is override , which is similar to other popular mocking tools. By override it means that the tool will consider always the latest user setup. Therefore, the first example will return the latest entity every-time and will fail in line #12: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Queue<Person> queue = new Queue<Person>();   Mock.Arrange(() => database.Get<Person>()).Returns(() => queue.Dequeue()); Mock.Arrange(() => database.Get<Person>()).Returns(person2);   // this will fail Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode());   Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); We can solve it the following way using a Queue and that removes the item from bottom on each call: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Queue<Person> queue = new Queue<Person>();   queue.Enqueue(person1); queue.Enqueue(person2);   Mock.Arrange(() => database.Get<Person>()).Returns(queue.Dequeue());   Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode()); Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); This will ensure that right entity is returned but this is not an elegant solution. So, in JustMock we introduced a  new option that lets you set up your expectations sequentially. Like: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Mock.Arrange(() => database.Get<Person>()).Returns(person1).InSequence(); Mock.Arrange(() => database.Get<Person>()).Returns(person2).InSequence();   Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode()); Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); The  “InSequence” modifier will tell the mocking tool to return the expected result as in the order it is specified by user. The solution though pretty simple and but neat(to me) and way too simpler than using a collection to solve this type of cases. Hope that helps P.S. The example shown in my blog is using interface don’t require a profiler  and you can even use a notepad and build it referencing Telerik.JustMock.dll, run it with GUI tools and it will work. But this feature also applies to concrete methods that includes JM profiler and can be implemented for more complex scenarios.

  Read the article

• "Never hide" Unity launcher via CCSM & gconf doesn't work

  - by Jim Holman

  All: I am running Unity 3D and I want to set my launcher to never hide. I first ran ccsm, and set "Hide Launcher" to "Never". I rebooted then logged back in and it was still auto-hiding. I then ran gconf-editor, I navigated to /apps/compiz-1/plugins/unityshell/screen0/options and then set launcher_hide_mode to 0. I again rebooted and logged back in. The launcher is still auto-hiding. Checking gconf-editor, launcher_hide_mode is set to 0, but this setting isn't active however. What can I do to get the launcher to Never hide? Thanks, Jim

  Read the article

• OSX: Mimic Ubuntu IP Masquerading via iptables with ipfw

  - by Dogbert

  Good day, I am attempting to replicate a setup I have between a router and an Ubuntu PC, and have the same setup working on my MacBook (10.6, Snow Leopard). First, I have a router that has a USB port. When I plug it into my Ubuntu PC, it creates an RNDIS connection, allowing me to connect to the router over the USB cable via an IP connection. When I plug it into my computer via USB, it gets assigned an IP address of 172.16.84.1, and a new adapter appears when I type ifconfig. I can then SSH into the device via ssh [email protected]. When I log in to the device, I flush the routes, then create the default route: admin@localhost> route -f admin@localhost> route add default 172.16.84.2 Now, in my Ubuntu machine, I use iptables to enable IP masquerading: root@Valhalla> sudo iptables -t nat -A POSTROUTING -s 172.16.84.2 -j MASQUERADE Once this is all done, the router has internet access over the USB connection to my PC. I am trying to replicate this exact setup on my MacBook now (Snow Leopard), but iptables does not exist for OSX, not even a Macports version exists. I have scoured through other questions on StackOverflow that cover the usage of the ipfw command, which apparently works as a drop-in replacement for iptables. However, the syntax is significantly different, and I'm pretty much lost. Does anyone with some experience with ipfw have some suggestions on how I could accomplish this and create a NAT connection via IP masquerading like I could with my Ubuntu PC? Thank you for your assistance.

  Read the article

• How do I handle 3rd party search result data (via cache)

  - by reikyoushin

  I have a search function on my site and it is taking data from 6 different 3rd party resources. The problem is, it takes too long requesting the data over and over again on the results page. I've read for questions like this on SO about session not being a good choice but for me 'memcache' is not an option, because the server doesn't have memcached installed and I have no way to install it now. Is there any other approach to do this? Storing in the database seem inappropriate because the data depends on the search terms requested. What I've been thinking is writing a file on the server that would act as a cache for this file but I don't know how I would know when to delete it after.

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >