Search Results

Search found 18303 results on 733 pages for 'network analyzation'.

Page 106/733 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

• network routing between mac & virtual XP

  - by Kevin

  Hi - I have a max laptop running XP inside VirtualBox. The network is setup to be a "Bridged Adapter" so that the IPs for both the host & guest OS's are assigned by my wireless routed. My guest XP has Nortel VPN connecting to corporate lan. When this is connected, I want to allow my host Mac OS to access the corporate network. But I'm struggling. Without Nortel VPN running, I can change routing on the mac so all traffic is sent via the guest XP - this works. But once I activate the VPN, this no longer works. If I try to change the routing on mac to run through the IP address assigned to the Nortel adapter, I get a "Network is unreachable" error. Below is the output from ipconfig /all on the guest XP OS. I'm beginning to believe that what I want to do is not possible because of the way Nortel secure the VPN - but before I give up I thought I'd post the problem here. Thanks, Kevin z:\eclipseworkspace\RESMobileSuite\trunk>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : zzzz-3177b42dd0 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : zzzz.zzz Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : AMD PCNET Family PCI Ethernet Adapter Physical Address. . . . . . . . . : 08-00-XX-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 Lease Obtained. . . . . . . . . . : 30 April 2010 12:22:02 Lease Expires . . . . . . . . . . : 01 May 2010 12:22:02 Ethernet adapter {8EB7A442-9683-45FB-A602-56110A4B3434}: Connection-specific DNS Suffix . : zzzz.zz Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler Miniport Physical Address. . . . . . . . . : 44-45-YY-YY-YY-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XXX.4.52.62 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : XXX.4.52.62 DNS Servers . . . . . . . . . . . : XXX.6.21.36 XXX.6.21.100

  Read the article

• Windows 2008 R2 SMB / CIFS Logging to diagnose Brother MFC Network Scanning

  - by Steven Potter

  I am attempting to setup network scanning on a brother MFC-9970CDW printer. According to the Brother documentation, the printer is setup to connect to any CIFS network share. I applied all of the appropriate setting in the printer however I get a "sending error" when I try to scan a document. When I look at the logs of the 2008 R2 server that I am attempting to connect to; I can see in the security log where the printer successfully authenticates, however nothing else is logged. I would assume that immediately after the authentication, the printer is making a CIFS request and some sort of error is occurring, however I can't seem to find any way to log this information to find out what is going on. Is it possible to get Windows 2008 to log SMB/CIFS traffic? Followup: I installed Microsoft netmon and captured the packets associated with the transaction: 510 3:04:28 PM 7/9/2012 34.4277743 System 192.168.1.134 192.168.1.10 SMB SMB:C; Negotiate, Dialect = NT LM 0.12 {SMBOverTCP:30, TCP:29, IPv4:22} 511 3:04:28 PM 7/9/2012 34.4281246 System 192.168.1.10 192.168.1.134 SMB SMB:R; Negotiate, Dialect is NT LM 0.12 (#0), SpnegoToken (1.3.6.1.5.5.2) {SMBOverTCP:30, TCP:29, IPv4:22} 519 3:04:29 PM 7/9/2012 34.8986214 System 192.168.1.134 192.168.1.10 SMB SMB:C; Session Setup Andx, NTLM NEGOTIATE MESSAGE {SMBOverTCP:30, TCP:29, IPv4:22} 520 3:04:29 PM 7/9/2012 34.8989310 System 192.168.1.10 192.168.1.134 SMB SMB:R; Session Setup Andx, NTLM CHALLENGE MESSAGE - NT Status: System - Error, Code = (22) STATUS_MORE_PROCESSING_REQUIRED {SMBOverTCP:30, TCP:29, IPv4:22} 522 3:04:29 PM 7/9/2012 34.9022870 System 192.168.1.134 192.168.1.10 SMB SMB:C; Session Setup Andx, NTLM AUTHENTICATE MESSAGEVersion:v2, Domain: CORP, User: PRINTSUPOFF, Workstation: BRN001BA9AD1FE6 {SMBOverTCP:30, TCP:29, IPv4:22} 523 3:04:29 PM 7/9/2012 34.9032421 System 192.168.1.10 192.168.1.134 SMB SMB:R; Session Setup Andx {SMBOverTCP:30, TCP:29, IPv4:22} 525 3:04:29 PM 7/9/2012 34.9051855 System 192.168.1.134 192.168.1.10 SMB SMB:C; Tree Connect Andx, Path = \\192.168.1.10\IPC$, Service = ????? {SMBOverTCP:30, TCP:29, IPv4:22} 526 3:04:29 PM 7/9/2012 34.9053083 System 192.168.1.10 192.168.1.134 SMB SMB:R; Tree Connect Andx, Service = IPC {SMBOverTCP:30, TCP:29, IPv4:22} 528 3:04:29 PM 7/9/2012 34.9073573 System 192.168.1.134 192.168.1.10 DFSC DFSC:Get DFS Referral Request, FileName: \\192.168.1.10\NSCFILES, MaxReferralLevel: 3 {SMB:33, SMBOverTCP:30, TCP:29, IPv4:22} 529 3:04:29 PM 7/9/2012 34.9152042 System 192.168.1.10 192.168.1.134 SMB SMB:R; Transact2, Get Dfs Referral - NT Status: System - Error, Code = (549) STATUS_NOT_FOUND {SMB:33, SMBOverTCP:30, TCP:29, IPv4:22} 531 3:04:29 PM 7/9/2012 34.9169738 System 192.168.1.134 192.168.1.10 SMB SMB:C; Tree Disconnect {SMBOverTCP:30, TCP:29, IPv4:22} 532 3:04:29 PM 7/9/2012 34.9170688 System 192.168.1.10 192.168.1.134 SMB SMB:R; Tree Disconnect {SMBOverTCP:30, TCP:29, IPv4:22} As you can see, the DFS referral fails and the transaction is shut down. I can't see any reason for the DFS referral to fail. The only reference I can find online is: https://bugzilla.samba.org/show_bug.cgi?id=8003 Anyone have any ideas for a solution?

  Read the article

• Hanging of host network connections when starting KVM guest on bridge

  - by Chris Phillips

  Hi, I've a KVM system upon which I'm running a network bridge directly between all VM's and a bond0 (eth0, eth1) on the host OS. As such, all machines are presented on the same subnet, available outside of the box. The bond is doing mode 1 active / passive, with an arp_ip_target set to the default gateway, which has caused some issues in itself, but I can't see the bond configs mattering here myself. I'm seeing odd things most times when I stop and start a guest on the platform, in that on the host I lose network connectivity (icmp, ssh) for about 30 seconds. I don't lose connectivity on the other already running VM's though... they can always ping the default GW, but the host can't. I say "about 30 seconds" but from some tests it actually seems to be 28 seconds usually (or at least, I lose 28 pings...) and I'm wondering if this somehow relates to the bridge config. I'm not running STP on the bridge at all, and the forwarding delay is set to 1 second, path cost on the bond0 lowered to 10 and port priority of bond0 also lowered to 1. As such I don't think that the bridge should ever be able to think that bond0 is not connected just fine (as continued guest connectivity implies) yet the IP of the host, which is on the bridge device (... could that matter?? ) becomes unreachable. I'm fairly sure it's about the bridged networking, but at the same time as this happens when a VM is started there are clearly loads of other things also happening so maybe I'm way off the mark. Lack of connectivity: # ping 10.20.11.254 PING 10.20.11.254 (10.20.11.254) 56(84) bytes of data. 64 bytes from 10.20.11.254: icmp_seq=1 ttl=255 time=0.921 ms 64 bytes from 10.20.11.254: icmp_seq=2 ttl=255 time=0.541 ms type=1700 audit(1293462808.589:325): dev=vnet6 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.604:326): dev=vnet7 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.618:327): dev=vnet8 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdd694a kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 64 bytes from 10.20.11.254: icmp_seq=30 ttl=255 time=0.514 ms 64 bytes from 10.20.11.254: icmp_seq=31 ttl=255 time=0.551 ms 64 bytes from 10.20.11.254: icmp_seq=32 ttl=255 time=0.437 ms 64 bytes from 10.20.11.254: icmp_seq=33 ttl=255 time=0.392 ms brctl output of relevant bridge: # brctl showstp brdev brdev bridge id 8000.b2e1378d1396 designated root 8000.b2e1378d1396 root port 0 path cost 0 max age 19.99 bridge max age 19.99 hello time 1.99 bridge hello time 1.99 forward delay 0.99 bridge forward delay 0.99 ageing time 299.95 hello timer 0.50 tcn timer 0.00 topology change timer 0.00 gc timer 0.04 flags vnet5 (3) port id 8003 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags vnet0 (2) port id 8002 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags bond0 (1) port id 0001 state forwarding designated root 8000.b2e1378d1396 path cost 10 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 0001 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags I do see the new port listed as learning, but in line with the forward delay, only for 1 or 2 seconds when polling the brctl output on a loop. All pointers, tips or stabs in the dark appreciated.

  Read the article

• BSD Sockets don't behave in a iPhone 3G environment

  - by Kyle

  I noticed that many times while developing for an iPhone 3G, BSD socket functions will simply fail. I also noticed at the time, the 3G antenna wasn't even ON, nor was there WIFI Access to back up the network call (So it seems ridiculous that it doesn't turn on to support the network request).. This information was verified with an app from Apple in the SDK called Connectivity Test, or something of the sort. Basically if you load Safari or something, then quickly load up the App it would be fine.. Of course that's not ideal. Apparently, to apple, gethostbyname() or something of the sort is by no means a reason to turn on the Antenna. I contacted Apple about this, and they said that the BSD functions do not switch the Antenna on, but calling all of the Objective-C CFNetwork functions do. I want portable code, so is there a way to keep my existing BSD setup? I really dislike coding in Objective-C, so if anyone knows a work around, that would be awesome.

  Read the article

• Cross-platform (microcontroller-PC) algorithm development

  - by Kyr

  Hello people! I was asked to develop a algorithm for network application on C. This project will be developed on Linux for PC and then it will be transferred to a more portable platform, something that will include a microcontroller. There are many microcontroller/companies out there that provide very nice and large libraries for TCP/IP. This software will hold statistics on the network performance. The whole idea of a cross platform (uC - PC) seems rubbish to me cause eventually the code should be written in a more platform specific way for the microcontroller, but I am not expert to judge anyway. Is there any clever way of doing this or is there a anyone that did this before? My brainstorming has "Wrapper library" and "Matlab"... Any ideas? Thx!

  Read the article

• lowest latency, least overhead app server?

  - by Mark Harrison

  I'm designing an application which will have a network interface for feeding out large numbers of very small metadata requests. The application code itself is very fast, basically looking up data cached in memory and sending it to the client. What's the absolute lowest latency I can get for a network application server running on a linux box? This will be an internal app running on gigE with no authentication. Any language/framework considered, with a preference for C, C++, or Python. Likewise for protocol, although HTTP would be nice.

  Read the article

• how to use XML sent by html form?

  - by user32167

  i have html form with textarea in which i paste some XML, for example: <network ip_addr="10.0.0.0/8" save_ip="true"> <subnet interf_used="200" name="lan1" /> <subnet interf_used="254" name="lan2" /> </network> When user submit form, that data is send to Java server, so in headers i get something like that: GET /?we=%3Cnetwork+ip_addr%3D%2210.0.0.0%2F8%22+save_ip%3D%22true%22%3E%0D%0A%3Csubnet+interf_used%3D%22200%22+name%3D%22lan1%22+%2F%3E%0D%0A%3Csubnet+interf_used%3D%22254%22+name%3D%22lan2%22+%2F%3E%0D%0A%3C%2Fnetwork%3E HTTP/1.1 how can i use that in my Java applications? I need to make some calculations on that data and re-send new generated XML.

  Read the article

• Kickstart: ifcfg-eth0 file genorated by kickstart when install from network but from initrd when install form USB

  - by dooffas

  When I install Fedora 19 with a kickstart file and via network, the generated ifcfg-eth0 file is genorated by the kickstart: # Generated by parse-kickstart However if I use the same kickstart file and install via a USB stick, the ifcfg file is generated by initrd. # Generated by dracut initrd The line in the kickstart file to set the network settings is as follows: network --device=eth0 --bootproto=dhcp --hostname=SOMEHOSTNAME Is there away to keep network device settings set in the kickstart file when not installing via network?

  Read the article

• Problem during JBoss Launch

  - by Rob

  Hi folks, I've a problem with JBoss 3.2.6. When I try to launch it, I get this error. 09:19:22,449 ERROR [StatefulSessionContainer] Starting failed jboss.j2ee:jndiName=TypicalBean,service=EJB java.rmi.ServerException: Could not bind home; nested exception is: javax.naming.CommunicationException: Network is unreachable [Root exception is java.io.IOException: Network is unreachable] at org.jboss.proxy.ejb.ProxyFactory.bindProxy(ProxyFactory.java:385) at org.jboss.proxy.ejb.ProxyFactory.start(ProxyFactory.java:187) and so on ... I use Java 1.6, and I can access to the Web, so I can't really figure out why this problem appears ... Thanks (and sorry for my poor english) Rob

  Read the article

• XmlSerializer.Deserialize blocks over NetworkStream

  - by Luca

  I'm trying to sends XML serializable objects over a network stream. I've already used this on an UDP broadcast server, where it receive UDP messages from the local network. Here a snippet of the server side: while (mServiceStopFlag == false) { if (mSocket.Available > 0) { IPEndPoint ipEndPoint = new IPEndPoint(IPAddress.Any, DiscoveryPort); byte[] bData; // Receive discovery message bData = mSocket.Receive(ref ipEndPoint); // Handle discovery message HandleDiscoveryMessage(ipEndPoint.Address, bData); ... Instead this is the client side: IPEndPoint ipEndPoint = new IPEndPoint(IPAddress.Broadcast, DiscoveryPort); MemoryStream mStream = new MemoryStream(); byte[] bData; // Create broadcast UDP server mSocket = new UdpClient(); mSocket.EnableBroadcast = true; // Create datagram data foreach (NetService s in ctx.Services) XmlHelper.SerializeClass<NetService>(mStream, s); bData = mStream.GetBuffer(); // Notify the services while (mServiceStopFlag == false) { mSocket.Send(bData, (int)mStream.Length, ipEndPoint); Thread.Sleep(DefaultServiceLatency); } It works very fine. But now i'me trying to get the same result, but on a TcpClient socket, but the using directly an XMLSerializer instance: On server side: TcpClient sSocket = k.Key; ServiceContext sContext = k.Value; Message msg = new Message(); while (sSocket.Connected == true) { if (sSocket.Available > 0) { StreamReader tr = new StreamReader(sSocket.GetStream()); msg = (Message)mXmlSerialize.Deserialize(tr); // Handle message msg = sContext.Handler(msg); // Reply with another message if (msg != null) mXmlSerialize.Serialize(sSocket.GetStream(), msg); } else Thread.Sleep(40); } And on client side: NetworkStream mSocketStream; Message rMessage; // Network stream mSocketStream = mSocket.GetStream(); // Send the message mXmlSerialize.Serialize(mSocketStream, msg); // Receive the answer rMessage = (Message)mXmlSerialize.Deserialize(mSocketStream); return (rMessage); The data is sent (Available property is greater then 0), but the method XmlSerialize.Deserialize (which should deserialize the Message class) blocks. What am I missing?

  Read the article

• Java Servlet says file does not exist

  - by Austin

  Hello World! I have developed a java servlet that monitors a folder on a network drive for new files then does some actions on them depending on what kind of file it is. It worked in Eclipse when Eclipse and Tomcat were running with each other, but now that I have deployed it onto a server(different machine), the servlet keeps logging that it cannot find the folder to be mapped. The exact same network drive is mapped, and the folder definitely exists. This problem only occurs when the servlet is run on the server, not on the development machine. Thanks! PS: It is a Windows Server 2003 Enterprise Server with Tomcat v6 installed.

  Read the article

• When [script] file download fails, how can I tell why?

  - by Bruce

  My web application sends me diagnostic info from the browser javascript telling me that a [script] tag I've injected has failed to download the associated .js file. I can't reproduce this locally, and there is no particular pattern to which file fails, or what the browser type is. There is a pattern to the geo location of the requests - Mexico and Brazil are always more frequent - so I'm guessing that perhaps the internet in general is just more flaky there, and it is just network issues causing the failures. I'd really like to know for sure, though. Is there any way to determine, from the browser javascript, whether the failure occurred because of an error returned by the server, from a network error, or from a protocol timeout? I don't care if the mechanism is browser-specific, since it seems likely that the same issue is causing the error on all browser types.

  Read the article

• Wireless not working on XP (with Intel® PRO/Wireless 2200BG Network Connection card and Zyxel router

  - by JohnIdol

  Hi all, I just got a new router, cant' get my old xp laptop (Toshiba Satellite) to connect to it, no matter if it's WPA-PSK or WEP (I was kind of thinking with WEP it would've worked but it doesn't). When I go connect and put in credentials the dialog stays up for a few minutes then disappears with no message and no connection is established. Here's the spec of router and wireless card: Wilreless card: Intel® PRO/Wireless 2200BG Network Connection Router: Zyxel P-660-HW-T1 v3 Everything works fine on my Vista machine (for once). Any help appreciated!

  Read the article

• Setting static IP on CentOS without system-config-network

  - by Josh

  Background information: I have a problem installing system-config-network. It appears it cannot find an update to sqlite (checks every mirror and comes back empty handed.) I have tried the skipping broken option and package cleanups from yum-utils. Since I cannot get it installed, I decided to set an ip manually from console. A quick Google search comes back empty handed as for an easy how-to guide that works. What do I need to do for a currently configured DHCP ip to change it to a Static IP from console. Thanks, Josh

  Read the article

• Windows Network Load Balancing on ESX Cluster with Dell PowerConnect stacks

  - by dunxd

  We recently switched out our Cisco 6500 core switch for a pair of Dell PowerConnect 6248 stacks. Since then, our Network Load Balanced Sharepoint, which runs on two virtual machines on an ESX cluster has been behaving very poorly. The symptoms are that opening and saving documents stored in sharepoint takes a very very long time. There are no errors showing up on the Sharepoint servers or SQL server, just a lot of annoyed users. Initially I thought there was no way NLB could cause this, but as soon as we repointed the DNS records for our intranet to the ip address of one of the web front ends, the problems disappeared. We suspect there is an issue related to multicast in the Dell configs - NLB is configured for multicast, but not IGMP. Has anyone got a similar set up to us and fixed this sort of issue? Sharepoint on VMware ESX, with Dell PowerConnect switches.

  Read the article

• Looking for a manual/how-to for installing a Canon iRunner 210s network printer

  - by Ssvarc

  A client has a Canon iRunner210S and is complaining about slow print speeds. I've searched for a install manual online but came up empty. A call to Canon technical referred me to their dealer network for service, as as informing me that there isn't a manual available on their website. Anyone know how to install these and/or have a link to a manual? The current setup has the printers on a LAN Manager printer port instead of on straight IP ports. Is this normal for this printer? And what exactly are Lan Manager ports (based on my research, they appear to be a way to authenticate a connection)?

  Read the article

• Network Transfer Rate on SMB/FTP

  - by Jack Sleight

  Hi, We're trying to optimise our network transfer rate from the client PCs to the file server, but having no luck. If I run an iperf test between a client PC (Windows XP) and our server (Linux) with a large TCP window size (the default is 8kb) I can get 60 Mbps. But when I run an SMB transfer speed test all I get is around 35 Mbps. When I run an FTP transfer speed test all I get is around 32 Mbps. I thought this was to do with the TCP window size, but I have now increased that to 256960 and it made no difference at all. Any ideas what I'm doing wrong? Or is 35 Mbps all I should expect? Cheers, Jack

  Read the article

• Cannot run setups from a vboxsvr mapped network drive on Windows within VirtualBox

  - by Dimitri C.

  I'm trying to run an application setup by double-clicking the setup.exe from within Windows Explorer. The file is located on a mapped network drive, and I'm using Windows 7. This results in the following error message: The specified path does not exist. Check the path, and then try again. The workaround I found is to copy the installer to the main hard drive (c:) and run it from there; however, this is rather inconvenient. I have the impression that the problem only occurs with installers, as everything seemed to work fine with regular exe's. Is there anyone who can explain this odd behavior? Update: After some extended tests I noticed that the problem only occurs with a mapped drive of VirtualBox's "shared folders" (cf. vboxsvr; VirtualBox v3.1.4). Mapping an SMB drive works fine. Update: The same problem occurs on Windows Vista.

  Read the article

• network design to segregate public and staff

  - by barb

  My current setup has: a pfsense firewall with 4 NICs and potential for a 5th 1 48 port 3com switch, 1 24 port HP switch, willing to purchase more subnet 1) edge (Windows Server 2003 for vpn through routing and remote access) and subnet 2) LAN with one WS2003 domain controller/dns/wins etc., one WS2008 file server, one WS2003 running Vipre anti-virus and Time Limit Manager which controls client computer use, and about 50 pcs I am looking for a network design for separating clients and staff. I could do two totally isolated subnets, but I'm wondering if there is anything in between so that staff and clients could share some resources such as printers and anti-virus servers, staff could access client resources, but not vice versa. I guess what I'm asking is can you configure subnets and/or vlans like this: 1)edge for vpn 2)services available to all other internal networks 3)staff which can access services and clients 4)clients which can access services but not staff By access/non-access, I mean stronger separation than domain usernames and passwords.

  Read the article

• ReadyNAS Duo - FTP home network connectivity issue

  - by dwabyick

  I have a ReadyNas Duo that I recently purchased and configured on my local home network. I'm an AT&T DSL subscriber using their default 2701HG-B Gateway (2Wire) wireless router. Basically, I have managed to configure my ReadyNAS, and can access HTTP shares and WINS shares just fine, but cannot get access to it via FTP. I've enabled it in the 'Standard File Protocols' section in the UI, and made a share have read/write default access via FTP. My settings: Port: 21 Authentication mode: User Allow upload resumes: Yes Passive ports: 1024-65535 Masquerade as: (empty, but I've tried the internal IP address). I've even poked around at my router, which has a firewall, and even tried to poke a hole for the 'FTP Server'app for the ReadyNAS. Doesn't seem like I should need to do this, or should. Any ideas what else to check? Thanks! -Daniel

  Read the article

• windows 2008 Server R2 Enterprise IIS 7 Unable to connect to Local network From Out Side

  - by rana sami akhtar

  i my company i had hosted a web page on live ip. external users can come to that page on server having IIS 7.. the problem is that on my page i placed three buttons one of internal exchange server , internal ftp server and internal Intranet. they are in internal network on different locations. i can come to main page but when i click the links the page not found error occurs. how can i reach all my internal servers that are running different services from internet through one page that can also authentication properly i am new please guide me step by step.

  Read the article

• Rosetta Stone Network V3 doesn't recognize built-in microphone in OSX Lion

  - by zarose

  I am using Rosetta Stone Network V3 on an early 2011 MacBook Pro running OSX Lion 10.7.3. When I log in, select a language and level, and then a lesson, I am prompted to select a microphone. The built in microphone doesn't show up, yet I've used it multiple times for other applications. I heard from another user that it doesn't work if headphones with a built-in microphone are used. I have not yet tried a USB microphone. Is there some free work around to this? I would prefer to not have to buy a USB microphone, but if that is the only solution, then I'll live. Edit: I noticed that Rosetta Stone tells me that if I don't have a microphone I should disable speech to move on, but that option is grayed out for me.

  Read the article

• Automatically repair network connection when it goes down.

  - by Spines

  Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

  Read the article

• Setting up a wireless network with Verizon MiFi

  - by winarm

  I am trying to set up a home network. I live in a location without cable internet so I have a Verizon MiFi card. I have a few laptops at the moment and they each connect through the card but I want to set up an Ubuntu 10.10 server and see if I can use it for DHCP. I have a Trendnet TEG-S50G switch and the computer I plan to use for the server has a Linksys WMP-11 Wireless PCI card. Is there any other equipment I need in order to get this to work? Is this even doable? Is there a better way to make this happen?

  Read the article

• Can't add a network printer - Windows 7

  - by r0ca

  Hi all, I have an HP 2600n installed on a SBS2003 server. This printer works fine when I print from the server itself and also from my Windows 7 computer #1. From my Windows 7 #2, it doesn't work. I get the error message that I need to install the driver. The error message is in french but here it the translation. No drivers has been found Windows is unable to find a driver for HP Color Laserjet 2600n on the network. To find a driver manually, click ok. If not, click on cancel and contact your sys adm. I reinstalled from scratch the printer, deleted the driver... Still no luck Any takers?

  Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >