Search Results

Search found 5810 results on 233 pages for 'staff of geeks'.

Page 106/233 | < Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >

  • Versioning and Continuous Integration with project settings files

    - by Michael Stephenson
    I came across something which was a bit of a pain in the bottom the other week. Our scenario was that we had implemented a helper style assembly which had some custom configuration implemented through the project settings. I'm sure most of you are familiar with this where you end up with a settings file which is viewable through the C# project file and you can configure some basic settings. The settings are embedded in the assembly during compilation to be part of a DefaultValue attribute. You have the ability to override the settings by adding information to your app.config and if the app.config doesn’t override the settings then the embedded default is used. All normal C# stuff so far… Where our pain started was when we implement Continuous Integration and we wanted to version all of this from our build. What I was finding was that the assembly was versioned fine but the embedded default value was maintaining the non CI build version number. I ended up getting this to work by using a build task to change the version numbers in the following files: App.config Settings.settings Settings.designer.cs I think I probably could have got away with just the settings.designer.cs, but wanted to keep them all consistent incase we had to look at the code on the build server for some reason. I think the reason this was painful was because the settings.designer.cs is only updated through Visual Studio and it writes out the code to this file including the DefaultValue attribute when the project is saved rather than as part of the compilation process. The compile just compiles the already existing C# file. As I said we got it working, and it was a bit of a pain. If anyone has a better solution for this I'd love to hear it

    Read the article

  • Adventures in MVVM &ndash; My ViewModel Base &ndash; Silverlight Support!

    - by Brian Genisio's House Of Bilz
    More Adventures in MVVM In my last post, I outlined the powerful features that are available in the ViewModelSupport.  It takes advantage of the dynamic features of C# 4.0 (as well as some 3.0 goodies) to help eliminate the plumbing that often comes with writing ViewModels.  If you are interested in learning about the capabilities, please take a look at that post and look at the code on CodePlex.  When I wrote about the ViewModel base class, I complained that the features did not work in Silverlight because as of 4.0, it does not support binding to dynamic properties.  Although I still think this is a bummer, I am happy to say that I have come up with a workaround.  In the Silverlight version of my base class, I include a PropertyCollectionConverter that lets you bind to dynamic properties in the ViewModelBase, especially the convention-based commands that the base class supports. To take advantage of any properties that are not statically defined, you can bind to the Properties property of the ViewModel and pass in a converter parameter for the name of the property you want to bind. For example, a ViewModel that looks like this: public class ExampleViewModel : ViewModelBase { public void Execute_MyCommand() { Set("Text", "Foo"); } } Can bind to the dynamic property and the convention-based command with the following XAML. <TextBlock Text="{Binding Properties, Converter={StaticResource PropertiesConverter}, ConverterParameter=Text}" Margin="5" /> <Button Content="Execute MyCommand" Command="{Binding Properties, Converter={StaticResource PropertiesConverter}, ConverterParameter=MyCommand}" Margin="5" /> Of course, it is not as pretty as binding to Text and MyCommand like you can in WPF.  But, it is better than having a failed feature.  This allows you to share your ViewModels between WPF and Silverlight very easily.  <BeatDeadHorse>Hopefully, in Silverlight 5.0, we will see binding to dynamic properties more directly????</BeatDeadHorse>

    Read the article

  • Do you want to be an ALM Consultant?

    - by Martin Hinshelwood
    Northwest Cadence is looking for our next great consultant! At Northwest Cadence, we have created a work environment that emphasizes excellence, integrity, and out-of-the-box thinking.  Our customers have high expectations (rightfully so) and we wouldn’t have it any other way!   Northwest Cadence has some of the most exciting customers I have ever worked with and even though I have only been here just over a month I have already: Provided training/consulting for 3 government departments Created and taught courseware for delivering Scrum to teams within a high profile multinational company Started presenting Microsoft's ALM Engagement Program  So if you are interested in helping companies build better software more efficiently, then.. Enquire at [email protected] Application Lifecycle Management (ALM) Consultant An ALM Consultant with a minimum of 8 years of relevant experience with Application Lifecycle Management, Visual Studio (including Visual Studio Team System) and software design is needed. Must provide thought leadership on best practices for enterprise architecture, understand the Microsoft technology solution stack, and have a thorough understanding of enterprise application integration. The ALM Practice Lead will play a central role in designing and implementing the overall ALM Practice strategy, including creating, updating, and delivering ALM courseware and consultancy engagements. This person will also provide project support, deliverables, and quality solutions on Visual Studio Team System that exceed client expectations. Engagements will vary and will involve providing expert training, consulting, mentoring, formulating technical strategies and policies and acting as a “trusted advisor” to customers and internal teams. Sound sense of business and technical strategy required. Strong interpersonal skills as well as solid strategic thinking are key. The ideal candidate will be capable of envisioning the solution based on the early client requirements, communicating the vision to both technical and business stakeholders, leading teams through implementation, as well as training, mentoring, and hands-on software development. The ideal candidate will demonstrate successful use of both agile and formal software development methods, enterprise application patterns, and effective leadership on prior projects. Job Requirements Minimum Education: Bachelor’s Degree (computer science, engineering, or math preferred). Locale / Travel: The Practice Lead position requires estimated 50% travel, most of which will be in the Continental US (a valid national Passport must be maintained).  This is a full time position and will be based in the Kirkland office. Preferred Education: Master’s Degree in Information Technology or Software Engineering; Premium Microsoft Certifications on .NET (MCSD) or MCPD or relevant experience; Microsoft Certified Trainer (MCT) or relevant experience. Minimum Experience and Skills: 7+ years experience with business information systems integration or custom business application design and development in a professional technology consulting, corporate MIS or software development environment. Essential Duties & Responsibilities: Provide training, consulting, and mentoring to organizations on topics that include Visual Studio Team System and ALM. Create content, including labs and demonstrations, to be delivered as training classes by Northwest Cadence employees. Lead development teams through the complete ALM and/or Visual Studio Team System solution. Be able to communicate in detail how a solution will integrate into the larger technical problem space for large, complex enterprises. Define technical solution requirements. Provide guidance to the customer and project team with respect to technical feasibility, complexity, and level of effort required to deliver a custom solution. Ensure that the solution is designed, developed and deployed in accordance with the agreed upon development work plan. Create and deliver weekly status reports of training and/or consulting progress. Engagement Responsibilities: · Provide a strong desire to provide thought leadership related to technology and to help grow the business. · Work effectively and professionally with employees at all levels of a customer’s organization. · Have strong verbal and written communication skills. · Have effective presentation, organizational and planning skills. · Have effective interpersonal skills and ability to work in a team environment. Enquire at [email protected]

    Read the article

  • Microsoft MVP Again for 2011

    - by Vincent Maverick Durano
    Normal 0 false false false EN-PH X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} I just got a great news from Microsoft that I’m re-awarded as Microsoft MVP (Most Valuable Professional) for this year.  This is my 3rd year in a row as an MVP and  I’m of course very happy about and feel honored by it. Woohoo!! Here’s the Proof =} Dear Vincent Maverick Durano, Congratulations! We are pleased to present you with the 2011 Microsoft® MVP Award! This award is given to exceptional technical community leaders who actively share their high quality, real world expertise with others. We appreciate your outstanding contributions in ASP.NET/IIS technical communities during the past year. The Microsoft MVP Award provides us the unique opportunity to celebrate and honor your significant contributions and say "Thank you for your technical leadership."     BIG thanks to Microsoft, my MVP Lead Lilian Quek, readers, and everyone who has supported me!!!

    Read the article

  • Two new Visual WebGui released simultaneously

    - by Webgui
    Two new Visual WebGui versions were released simultaneously. Downloads are available here. The first is a revision to the beta version of the upcoming 6.4 which brings all-new developer/designer interface and capabilities. The second release is the latest enhancement of the current 6.3.x version. The new 6.3.15 includes the following changes over 6.3.14: Breaking Changes [1] ---------------------------------------------------------------------------------------------- VWG-6132 - [v6.3.15] Deploy language resource assemblies next to the Gizmox.WebGUI.Forms assembly location Installation puts the resources in the assemblies folder rather thatn the GAC. That way they are copied to the output folder of the app, thus enabling their deployment to the server. Bugs fixes [7] ---------------------------------------------------------------------------------------------- VWG-5714 - Help.ShowHelp of .CHM file with images should show the images VWG-6132 - [v6.3.15] Deploy language resource assemblies next to the Gizmox.WebGUI.Forms assembly location VWG-6401 - Radiobutton: The DoubleClick event should fire. VWG-6409 - The Hourglass (white/blue) Spinner icon should not display to the left on LTR cultures VWG-6452 - Calling/Causing an update on a scrollable container should not reset the scroll position. VWG-6463 - Redrawing a scrollable container does not preserve last scrolling position. VWG-6867 - Listbox: The Items selection in run time should be work correctly Enhancements [1] ---------------------------------------------------------------------------------------------- VWG-6610 - Visifire - Add a click event handler on the graph

    Read the article

  • Day 1 - Finding Like Minds

    - by dapostolov
    So, is being a Game Developer any different from being an IT Developer? I picture a poorly lit environment where I get to purchase my own desk lamp; I'm thinking one of those huge lava lamps that pump out so much heat you could fry an egg on it. To my right: a "great wall" of empty coke cans dwarf me. Eating my last slice of pizza I look across my desk to see a fellow developer with a smug look on his face;  he's just coded his latest module for the game and it looks like he's in nirvana. My duty, of course, is to remind him to keep focused on the job at hand. So, picking up my trusty elastic and aerodynamically crafted paper bullet I begin a 10 minute war of welts and laughter which is promptly abrupted by our Project Manager demanding more details from our morning Scrum meeting. After providing about 5 minutes of geek speak and several words of comfort to make his eyes glaze over...it hits me, the idea for the module...beckoning my developer friend over, we quickly shoo the Project Manager away and begin our brainstorming frenzy ... now, where'd I put that full can of coke? OK. OK. This isn't probably the most ideal game developer environment, but it definitely sounds fun to me...and from what I gather is nothing like most game development companies. But I'm not doing this blog series to "go pro"; like I stated in my first post I want to make a 2D game from an idea my best friend and I drummed up long, long ago. I'm in this for the passion AND I want to see how easy it is for us .Net Developers to create a game. So where do I start? Where can I find like minded individuals? What technologies are there? What do I need to make a video game? The questions are endless....AND...since I already have an idea ... lets start with ... Technology (yes, I'm a geek, live with it...) Technology OK. Predominantly, games are still made in C++ or even C. I'm not sure how much assembly code is floating around lately, however, that is not my concern. I do know C / C++ from my past, enough to even get me by, but I'm mainly interested in a recent, not-so-new, technology called XNA. What is XNA? XNA allows us .Net Developers to make 2D / 3D games for windows, Xbox*, and Windows Mobile 7*. * = for a nominal fee *cough* The following link is your one stop shop to XNA game development: http://creators.xna.com/en-US/education/gettingstarted The above site hosts information such as: - getting started - a sample/instructional shooter game in 2D / 3D with code (if I'm taking too long for you in this blog series) - downloads - starter kits... http://creators.xna.com/en-US/education/starterkits/ And of course...forums. You can also subscribe and pay for their premium membership which gets you some pretty awesome tutorials, resources, downloads, and premium community support. Some general Wiki information about XNA: http://en.wikipedia.org/wiki/XNA_%28Microsoft%29 Community Support OK. Let's move on to industry and community support. Apart from XNA, there are some really cool sites out there, I just haven't found all of them yet. However, I found a really cool Game Development website called Gamastura. You can click on the following link to get you there: http://www.gamasutra.com/ The site is 100% dedicated to "The Art & Business of Making Games". Armed with blogs, twitter, jobs/resumes and most importantly industry news; one could subscribe to the feed and got lost in the wealth of information it provides. On a side note: I remember Gamasutra being around when my best friend and I wanted to make a video game...meaning, they've been around for a while now. I think the most beneficial aspect of this site is to understand the industry you want to get into. Otherwise, it's just a cool site to keep up to date with the industry in general. Another Community Support option is LinkedIn. Amongst the land of extremely bloated achievements and responsibilities lay 3 groups (that I have found) that deal with game development.: http://www.linkedin.com/groups?gid=59205 - Game Developers http://www.linkedin.com/groups?gid=824817 - DirectX Game Developer Network http://www.linkedin.com/groups?gid=756587 - DirectX Developers The Game Developers group in LinkedIn is by far the most active of the three and could possibly provide a wealth of support. What I've done thus far: - I lightly researched the XNA technology - I looked around for some community sites to assist me - I downloaded the XNA Game Studio 3.1 on my PC and installed it on my IDE - I even tried both tutorials! http://creators.xna.com/en-US/education/gettingstarted/bgintro/chapter1   Best Regards D.

    Read the article

  • Getting up and started with the Windows Phone Developer Tools 7.1 Beta 2

    - by mbcrump
    Windows Phone Developer Tools 7.1 Beta 2 was released on 6/29/2011. Are you ready for it? If not then let my guide help you get your system prepared and go through a few new features. Download links: Web Installer of Windows Phone 7.1 Beta 2 SDK ISO Image of Windows Phone 7.1 Beta 2 SDK - (723 MB) To get started you are going to need to remove the previous version of your Windows Phone Developer Tools 7.1 Beta 1.   This kicks off the process of uninstalling the Beta.   Once it is uninstalled then you are going to want to grab the bits from: http://www.microsoft.com/download/en/details.aspx?id=26648. The only thing your interested in here is the vm_web2.exe.   Make sure before you start that Zune is not running or you will get this error message like this one and have to restart from scratch. Now just go through your normal Install Screens. It should be installed and ready to go: A couple of things to note: 1) When creating a new phone application you now have several new templates to choose from as shown below. I welcome this addition because I’m a firm believer that we need more templates in order to get more people started. 2) Once you select an application template you can now pick which version of the Windows Phone platform that you wish to target: 3) If you created a WP7 7.1 Beta 1 project that it will still work properly in WP7 7.1 Beta 2. 4) You now have access to the search app icon. Once pressed then you will see something like this: 5) Under Settings –> Applications. You now have background tasks. 6) You will notice that the Web Browser looks a little different with the URL now located at the bottom of the screen and completely removing the “add”, “favorites” and “tabs” icon. Those icons are now moved to the menu bar.   That is it for my “Getting up and going with the Windows Phone Developer Tools 7.1 Beta 2”. I hope you enjoyed it and please feel free to subscribe to my feed or follow me on Twitter.   Subscribe to my feed

    Read the article

  • [Dear Recruiter] I developed in Mo'Fusion

    - by refuctored
    Forward: Sometimes I really feel like technology recruiters have no experience or knowledge of the field they are recruting for.  A warning to those companies hiring technical recruiters -- ensure that the technical recruiters you hire to fill a position are actually technical.  Here's proof below, where I make up completely ridiculous technologies, but still have interest from the recruiter for an interview. Letter to me: Hello - Your name came up as a possible match for a long term contract Cold Fusion Developer role I have in Bothell, WA.  This role requires you to be onsite in Bothell, WA. This is  a tough role to fill so I was hoping you might have someone you can recommend? Unfortunately no telecommute. Thank you! Sincerly, Mindy Recruiter My response: Mindy -- Wow I'm super-excited that you took the time to contact me about this position!  Let me tell you, you won't be disappointed with my skill set! Firstly, I've been developing in ColdFusion since 1993 before it was owned by Adobe and it was operating under code name, "Hot-Jack".  Recently I started developing under the Domain-View-Driven-Domain-Model (DVDDM), integrating client-side CF on Moobuntu.  Not only do I have a boat load of ColdFusion EXP,  I also have a ton of experience in the open source communities lesser known derivative of CF, Mo'Fusion (MF).  I've also invested thousands of hours of my time learning esoteric programming languages. Look forward to working with you! George And her response: Hi George – just left you a message. Give me a call at your convenience.  The role does require someone to be onsite here.. are you able to relocate yourself? Mindy [Sigh]

    Read the article

  • Turn off the navigation menus on a MojoPortal page

    - by strongeye
    I needed to figure out how to turn off the navigation for the portal from my custom module. After some searching, I found code in Secure/Login.aspx.cs that did the trick. The function to use is this: SuppressAllMenus() This function is part of MojoPortal.Web.mojoBasePage so pages that inherit from that will already have access to the function.

    Read the article

  • BizTalk 2009 - SQL Server Job Configuration

    - by StuartBrierley
    Following the installation of Biztalk Server 2009 on my development laptop I used the BizTalk Server Best Practice Analyser which highlighted the fact that two of the SQL Server Agent jobs that BizTalk relies on were not running successfully.  Upon investigation it turned out that these jobs needed to be configured before they would run successfully. To configure these jobs open SQL Server Management Studio, expand SQL Server Agent > Jobs and double click on the appropriate job.  Select Steps and then edit the appropriate entries. Backup BizTalk Server (BizTalkMgmtDb) This job is comprised of three steps BackupFull, MarkAndBackupLog and ClearBackupHistory. BackupFull exec [dbo].[sp_BackupAllFull_Schedule] ‘d’ /* Frequency */,‘BTS’ /* Name */,‘<destination path>’ /* location of backup files */ The frequency here is set/left as daily The name is left as BTS You must provide a full destination path for the backup files to be stored. There are also two optional parameters: A flag that controls if the job forces a full backup if a partial backup fails A parameter to control the time of day to run the full backup; the default is midnight UTC time For example: exec [dbo].[sp_BackupAllFull_Schedule] ‘d’ /* Frequency */,‘BTS’ /* Name */,‘<destination path>’ /* location of backup files */ , 0, 22 MarkAndBackUpLog exec [dbo].[sp_MarkAll] ‘BTS’ /* Log mark name */,’<destination path>’  /*location of backup files */ You must provide a destination path for the log backups. Optionally you can also add an extra parameter that tells the procedure to use local time: exec [dbo].[sp_MarkAll] ‘BTS’ /* Log mark name */,’<destination path>’  /*location of backup files */ ,1 Clear Backup History exec [dbo].[sp_DeleteBackupHistory] @DaysToKeep=7 This will clear out the instances in the MarkLog table older than 7 days.    DTA Purge and Archive (BizTalkDTADb) This job is comprised of a single step. Archive and Purge exec dtasp_BackupAndPurgeTrackingDatabase 0, --@nLiveHours tinyint, 1, --@nLiveDays tinyint = 0, 30, --@nHardDeleteDays tinyint = 0, null, --@nvcFolder nvarchar(1024) = null, null, --@nvcValidatingServer sysname = null, 0 --@fForceBackup int = 0 Any completed instance that is older than the live days plus live hours will be deleted, as will any associated data. Any data older than the HardDeleteDays will be deleted - this means that those long running orchestration instances that would otherwise never be purged will at some point have their data cleared down while allowing the instance to continue, thus preventing the DTA databse from growing indefinitely.  This should always be greater than the soft purge window. The NVC folder is the path for the backup files, if this is null the job will not run failing with the error : DTA Purge and Archive (BizTalkDTADb) Job failed SQL Server Management Studio, job activity monitor, view history The @nvcFolder parameter cannot be null. Archive and Purge step How long you choose to keep instances in the Tracking Database is really up to you. For development I have set this up as: exec dtasp_BackupAndPurgeTrackingDatabase 0, 1, 30, ’<destination path>’, null, 0 On a live server you may want to adjust these figures: exec dtasp_BackupAndPurgeTrackingDatabase 0, 15, 20, ’<destination path>’, null, 0

    Read the article

  • Get to Know a Candidate (8 of 25): Rocky Anderson&ndash;Justice Party

    - by Brian Lanham
    DISCLAIMER: This is not a post about “Romney” or “Obama”. This is not a post for whom I am voting. Information sourced for Wikipedia. Ross Carl “Rocky” Anderson served two terms as the 33rd mayor of Salt Lake City, Utah, between 2000 and 2008.  He is the Executive Director of High Road for Human Rights.  Prior to serving as Mayor, he practiced law for 21 years in Salt Lake City, during which time he was listed in Best Lawyers in America, was rated A-V (highest rating) by Martindale-Hubbell, served as Chair of the Utah State Bar Litigation Section[4] and was Editor-in-Chief of, and a contributor to, Voir Dire legal journal. As mayor, Anderson rose to nationwide prominence as a champion of several national and international causes, including climate protection, immigration reform, restorative criminal justice, LGBT rights, and an end to the "war on drugs". Before and after the invasion by the U.S. of Iraq in 2003, Anderson was a leading opponent of the invasion and occupation of Iraq and related human rights abuses. Anderson was the only mayor of a major U.S. city who advocated for the impeachment of President George W. Bush, which he did in many venues throughout the United States. Anderson's work and advocacy led to local, national, and international recognition in numerous spheres, including being named by Business Week as one of the top twenty activists in the world on climate change,serving on the Newsweek Global Environmental Leadership Advisory Board, and being recognized by the Human Rights Campaign as one of the top ten straight advocates in the United States for LGBT equality. He has also received numerous awards for his work, including the EPA Climate Protection Award, the Sierra Club Distinguished Service Award, the Respect the Earth Planet Defender Award, the National Association of Hispanic Publications Presidential Award, The Drug Policy Alliance Richard J. Dennis Drugpeace Award, the Progressive Democrats of America Spine Award, the League of United Latin American Citizens Profile in Courage Award, the Bill of Rights Defense Committee Patriot Award, the Code Pink (Salt Lake City) Pink Star honor, the Morehouse University Gandhi, King, Ikeda Award, and the World Leadership Award for environmental programs. Formerly a member of the Democratic Party, Anderson expressed his disappointment with that Party in 2011, stating, “The Constitution has been eviscerated while Democrats have stood by with nary a whimper. It is a gutless, unprincipled party, bought and paid for by the same interests that buy and pay for the Republican Party." Anderson announced his intention to run for President in 2012 as a candidate for the newly-formed Justice Party. Although founded by Rocky Anderson of Utah, the Justice Party was first recognized by Mississippi and describes itself as advocating economic justice through measures such as green jobs and a right to organize, environment justice through enforcing employee safeguards in trade agreements, and social and civic justice through universal health care. In its first press release, the Utah Justice Party set forth its goals for justice in the economic, environmental, social and civic realms, along with a call to rid the corrupting influence of big money from government, to reverse the erosion of rights guaranteed by the Constitution, and to stop draining American resources to support illegal wars of aggression. Its press release says its grassroots supporters believe that now is the time for all to "shed their skeptical view that their voices don't matter", that "our 2-party system is a 'duopoly' controlled by the same corporate and military interests", and that the people must act to ensure "that our nation will achieve a brighter, sustainable future.” Anderson has ballot access in CO, CT, FL, ID, LA, MI, MN, MS, NJ, NM, OR, RI, TN, UT, VT, WA (152 electoral votes) and has write-in access in AL, AK, DE, GA, IL, IO, KS, MD, MO, NE, NH, NY, PA, TX Learn more about Rocky Anderson and Justice Party on Wikipedia.

    Read the article

  • Installation experiences with NDepend under Win7/64 with restricted user permissions

    - by Marko Apfel
    Today Patrick gives me a new license for his static code analysis tool NDepend for my fresh machine with Win7/64. This platform is new for me, so some things are different to Win XP. Maybe that till yet some of these things are not well enough understandanded from me. So i stepped in some traps. Here are my notes to get NDepend running. Download of NDepend Professional Edition from http://www.ndepend.com/NDependDownload.aspx   Extracted to c:\program files (x86)\NDepend   Started NDepend.Install.VisualStudioAddin.exe this failed with Okay – sounds plausible.   Copy NDependProLicense.xml to this folder   Next try with NDepend.Install.VisualStudioAddin.exe opens the integration dialog   Registering in Visual Studio failed with   Manually unblock as described (first solution hint)   and here comes my largest understanding problem. After unblocking this file   and closing this dialog the next opening shows the blocking again: Why? So the same error during integration pops up.   Okay – tried the second solution hint with copying folders Copy all to a full accessable folder under c:\temp\   Now the installation works   looks good   copying the folders back to c:\program files (x86)\NDepend   starting Visual Studio failed with     Okay – copying the folder to a private application folder c:\users\apf\My Applications\NDepend   Installing again   Now Visual Studio runs and NDepend is integrated Nevertheless my machine is only used by me, i prefer “all user”-installations. The described way works sadly only for my account.

    Read the article

  • Override an IOCTL Handler in PQOAL

    - by Kate Moss' Big Fan
    When porting or creating a BSP to a new platform, we often need to make change to OEMIoControl or HAL IOCTL handler for more specific. Since Microsoft introduced PQOAL in CE 5.0 and more and more BSP today leverages PQOAL to simplify the OAL, we no longer define the OEMIoControl directly. It is somehow analogous to migrate from pure Windows SDK to MFC; people starts to define those MFC handlers and forgot the WinMain and the big message loop. If you ever take a look at the interface between OAL and Kernel, PUBLIC\COMMON\OAK\INC\oemglobal.h, the pfnOEMIoctl is still there just as the entry point of Windows Program is WinMain since day one. (For those may argue about pfnOEMIoctl is not OEMIoControl, I will encourage you to dig into PRIVATE\WINCEOS\COREOS\NK\OEMMAIN\oemglobal.c which initialized pfnOEMIoctl to OEMIoControl. The interface is just to split OAL and Kernel which no longer linked to one executable file in CE 6, all of the function signature is still identical) So let's trace into PQOAL to realize how it implements OEMIoControl and how can we override an IOCTL handler we interest. First thing to know is the entry point (just as finding the WinMain in MFC), OEMIoControl is defined in PLATFORM\COMMON\SRC\COMMON\IOCTL\ioctl.c. Basically, it does nothing special but scan a pre-defined IOCTL table, g_oalIoCtlTable, and then execute the handler. (The highlight part) Other than that is just for error handling and the use of critical section to serialize the function. BOOL OEMIoControl(     DWORD code, VOID *pInBuffer, DWORD inSize, VOID *pOutBuffer, DWORD outSize,     DWORD *pOutSize ) {     BOOL rc = FALSE;     UINT32 i; ...     // Search the IOCTL table for the requested code.     for (i = 0; g_oalIoCtlTable[i].pfnHandler != NULL; i++) {         if (g_oalIoCtlTable[i].code == code) break;     }     // Indicate unsupported code     if (g_oalIoCtlTable[i].pfnHandler == NULL) {         NKSetLastError(ERROR_NOT_SUPPORTED);         OALMSG(OAL_IOCTL, (             L"OEMIoControl: Unsupported Code 0x%x - device 0x%04x func %d\r\n",             code, code >> 16, (code >> 2)&0x0FFF         ));         goto cleanUp;     }            // Take critical section if required (after postinit & no flag)     if (         g_ioctlState.postInit &&         (g_oalIoCtlTable[i].flags & OAL_IOCTL_FLAG_NOCS) == 0     ) {         // Take critical section                    EnterCriticalSection(&g_ioctlState.cs);     }     // Execute the handler     rc = g_oalIoCtlTable[i].pfnHandler(         code, pInBuffer, inSize, pOutBuffer, outSize, pOutSize     );     // Release critical section if it was taken above     if (         g_ioctlState.postInit &&         (g_oalIoCtlTable[i].flags & OAL_IOCTL_FLAG_NOCS) == 0     ) {         // Release critical section                    LeaveCriticalSection(&g_ioctlState.cs);     } cleanUp:     OALMSG(OAL_IOCTL&&OAL_FUNC, (L"-OEMIoControl(rc = %d)\r\n", rc ));     return rc; }   Where is the g_oalIoCtlTable? It is defined in your BSP. Let's use DeviceEmulator BSP as an example. The PLATFORM\DEVICEEMULATOR\SRC\OAL\OALLIB\ioctl.c defines the table as const OAL_IOCTL_HANDLER g_oalIoCtlTable[] = { #include "ioctl_tab.h" }; And that leads to PLATFORM\DEVICEEMULATOR\SRC\INC\ioctl_tab.h which defined some of IOCTL handler but others are defined in oal_ioctl_tab.h which is under PLATFORM\COMMON\SRC\INC\. Finally, we got the full table body! (Just like tracing MFC, always jumping back and forth). The format of table is very straight forward, IOCTL code, Flags and Handler Function // IOCTL CODE,                          Flags   Handler Function //------------------------------------------------------------------------------ { IOCTL_HAL_INITREGISTRY,                   0,  OALIoCtlHalInitRegistry     }, { IOCTL_HAL_INIT_RTC,                       0,  OALIoCtlHalInitRTC          }, { IOCTL_HAL_REBOOT,                         0,  OALIoCtlHalReboot           }, The PQOAL scans through the table until it find a matched IOCTL code, then invokes the handler function. Since it scans the table from the top which means if we define TWO handler with same IOCTL code, the first one is always invoked with no exception. Now back to the PLATFORM\DEVICEEMULATOR\SRC\INC\ioctl_tab.h, with the following table { IOCTL_HAL_INITREGISTRY,                   0,  OALIoCtlDeviceEmulatorHalInitRegistry     }, ... #include <oal_ioctl_tab.h> Note the IOCTL_HAL_INITREGISTRY handler are defined in both BSP's local ioctl_tab.h and the common oal_ioctl_tab.h, but due to BSP's local handler comes before "#include <oal_ioctl_tab.h>" so we know the OALIoCtlDeviceEmulatorHalInitRegistry always get called. In this example, the DeviceEmulator BSP overrides the IOCTL_HAL_INITREGISTRY handler from OALIoCtlHalInitRegistry to OALIoCtlDeviceEmulatorHalInitRegistry by manipulating the g_oalIoCtlTable table. (In some point of view, it is similar to message map in MFC) Please be aware, when you override an IOCTL handler in PQOAL, you may want to clone the original implementation to your BSP and change to meet your need. It is recommended and save you the redundant works but remember to rename the handler function (Just like the DeviceEmulator it changes the name of OALIoCtlHalInitRegistry to OALIoCtlDeviceEmulatorHalInitRegistry). If you don't change the name, linker may not be happy (due to name conflict) and the more important is by using different handler name, you could always redirect the handler back to original one. (It is like the concept of OOP that calling a function in base class; still not so clear? I am goinf to show you soon!) The OALIoCtlDeviceEmulatorHalInitRegistry setups DeviceEmulator specific registry settings and in the end, if everything goes well, it calls the OALIoCtlHalInitRegistry (PLATFORM\COMMON\SRC\COMMON\IOCTL\reginit.c) to do the rest.     if(fOk) {         fOk = OALIoCtlHalInitRegistry(code, pInpBuffer, inpSize, pOutBuffer,             outSize, pOutSize);     } Now you got the picture, whenever you want to override an IOCTL hadnler that is implemented in PQOAL just Clone the handler function to your BSP as a template. Simple name change for the handler function, and a name change in the IOCTL table header file that maps the IOCTL with the function Implement your IOCTL handler and whenever you need to redirect it back just calling the original handler function. It is the standard way of implementing a custom IOCTL and most Microsoft developers prefer. The mapping of IOCTL routine to IOCTL code is platform specific - you control the header file that does that mapping.

    Read the article

  • Update the model on HttpPost and render the changes in the View

    - by Etienne Giust
    With MVC3, I came over that problem where I was rendering a view with an updated model at the end of an HttpPost and the changes to the model were never applied to the rendered view :   NOT working as expected ! [HttpPost]         public ActionResult Edit(JobModel editedJobModel)         {             // Update some model property             editedJobModel.IsActive = true;                          // The view will NOT be updated as expected             return View(editedJobModel);         }   This is the standard behavior. In MVC3, POSTing the model does not render the Html helpers again. In my example, a HiddenFor bound to the IsActive value will not have its value set to true after the view is rendered.   Are you stuck, then ?   Well, for one, you’re not supposed to do that: in an ideal world you are supposed to apply the Post/Redirect/Get pattern. You would redirect to a new GET after your POST performed its actions. That’s what I usually do, but sometimes, when maintaining code and implementing slight changes to a pre-existing and tested logic, one prefers to keep structural changes to a minimum.   If you really have to (but my advice is to try to implement the PRG pattern whenever possible), here is a solution to alter values of the model on a POST and have the MVC engine render it correctly :   Solution [HttpPost] public ActionResult Edit(JobModel editedJobModel) {     // NOT WORKING : Update some model property     //editedJobModel.IsActive = true;     //Force ModelState value for IsActive property     ModelState["IsActive"].Value = new ValueProviderResult(true, "True", null);          // The view will be updated as expected     return View(editedJobModel); }   As you can see, it is a “dirty” solution, as the name (as a  string) of the updated property is used as a key of the ModelState dictionary. Also, the use of ValueProviderResult is not that straightforward.   But hey, it works.

    Read the article

  • Community Branching

    - by Dane Morgridge
    As some may have noticed, I have taken a liking to Ruby (and Rails in particular) quite a bit recently. This last weekend I spoke at the NYC Code Camp on a comparison of ASP.NET and Rails as well as an intro to Entity Framework talk.  I am speaking at RubyNation in April and have submitted to other ruby conferences around the area and I am also doing a Rails and MongoDB talk at the Philly Code Camp in April. Before you start to think this is my "I'm leaving .NET post", which it isn't so I need to clarify. I am not, nor do I intend to any time in the near future plan on abandoning .NET.  I am simply branching out into another community based on a development technology that I very much enjoy.  If you look at my twitter bio, you will see that I am into Entity Framework, Ruby on Rails, C++ and ASP.NET MVC, and not necessarily in that order.  I know you're probably thinking to your self that I am crazy, which is probably true on several levels (especially the C++ part). I was actually crazy enough at the NYC Code Camp to show up wearing a Linux t-shirt, presenting with my MacBook Pro on Entity Framework, ASP.NET MVC and Rails. (I did get pelted in the head with candy by Rachel Appel for it though) At all of the code camps I am submitting to this year, i will be submitting sessions on likely all four topics, and some sessions will be a combination of 2 or more.  For example, my "ASP.NET MVC: A Gateway To Rails?" talk touches ASP.NET MVC, Entity Framework Code First and Rails. Simply put (and I talk about this in my MVC & Rails talk) is that learning and using Rails has made me a better ASP.NET MVC developer. Just one example of this is helper methods.  When I started working with ASP.NET MVC, I didn't really want to use helpers and preferred to just use standard html tags, especially where links were concerned.  It was just me being stubborn and not really seeing all of the benefit of the helpers.  To my defense, coming from WebForms, I wanted to be as bare metal as possible and it seemed at first like a lot of the helpers were an unnecessary abstraction. I took my first look at Rails back in v1 and didn't spend very much time with it so I dismissed it and went on my merry ASP.NET WebForms way.  Then I picked up ASP.NET MVC and grasped the MVC pattern itself much better. After this, I took another look at Rails and everything made sense.  I decided then to learn Rails. (I think it is important for developers to learn new languages and platforms regularly so it was a natural progression for me) I wanted to learn it the right way, so when I dug into code, everyone used helpers everywhere for pretty much everything possible. I took some time to dig in and found out how helpful they were and subsequently realized how awesome they were in ASP.NET MVC also and started using them. In short, I love Rails (and Ruby in general).  I also love ASP.NET MVC and Entity Framework and yes I still love C++.  I have varying degrees of love for them individually at any given moment and it is likely to shift based on the current project I am working on.  I know you're thinking it so before you ask the question. "Which do I use when?", I'm going to give the standard developer answer of: It depends.  There are a lot of factors that I am not going to even go into that would go into a decision.  The most basic question I would ask though is,  does this project depend on .NET?  If it does, then I'd say that ASP.NET MVC is probably going to be the more logical choice and I am going to leave it at that.  I am working on projects right now in both technologies and I don't see that changing anytime soon (one project even uses both). With all that being said, you'll find me at code camps, conferences and user groups presenting on .NET, Ruby or both, writing about .NET and Ruby and I will likely be blogging on both in the future.  I know of others that have successfully branched out to other communities and with any luck I'll be successful at it too. On a (sorta) side note, I read a post by Justin Etheredge the other day that pretty much sums up my feelings about Ruby as a language.  I highly recommend checking it out: What Is So Great About Ruby?

    Read the article

  • SharePoint 2010 Hosting :: Sending SMS Alerts in SharePoint 2010 Over Office Mobile Service Protocol (OMS)

    - by mbridge
    In this post, I want to share the exciting news of SharePoint's 2010 new feature. Finally it's possible to send SMS directly from SharePoint to mobile phones. The advantages of sending SMS instead of Email messages are obvious: SMS alerts or reminders that are received on mobile phones are more preferred than Email messages that can be lost in the mass of spam. The interface is standard as it's very similar to previous versions of the product. Adjustments are easy to do, simply enter the address of the Office Mobile Service (OMS) web-service which you want to use for sending messages, then specify the connection parameters. Further details on Office Mobile Service is available below. The Test Service button checks if OMS web-service is accessible using provided URL (user name and password are not verified). This check is needed because OMS web-service URL depends on the mobile operator and country. It's now possible to select the method of sending alerts in alerts settings. Email option is selected by default. Alerts delivery method is displayed in the list of existing alerts. Office Mobile Service (OMS) SharePoint 2010 uses exterior servers similar to SMTP servers for sending SMS alerts. However, Microsoft started development and promotion of their own protocol instead of using existing ones. That is how Office Mobile Service (OMS) appeared. This open protocol enables clients to send text and multimedia messages (mobile messages) remotely to the server which processes these messages and delivers them to mobile phones.  Typical scenario of utilizing this protocol is data transfer between computer application and mobile phone. The recipient can answer messages and the server in return will deliver the answer by SMTP protocol, i.e. by email.  Key quality of this protocol is that it's built on base of HTPP(S) and SOAP protocols.     This means that in fact SMS gateway must support typified web-service. What do you get from web-service? What you get is the ability to send SMS from any platform you want.  The protocol is being developed at the moment and version 0.2 from 08/28/2009 was available when the article was published.  For promotion of their protocol and simplifying server search, Microsoft represented web-service http://messaging.office.microsoft.com/HostingProviders.aspx that helps to receive the list of providers, which supports OMS protocol and message delivery to your operator.  All you need to do is decide which provider to use, complete the agreement, then adjust the SharePoint connection parameters and start working.  Some providers advertise themselves not only for clients but for mobile operators as well. They offer automatic adding to the list of the Office Mobile Service Providers.  To view the full specifications of OMS, please go to http://msdn.microsoft.com/en-us/library/dd774103.aspx.

    Read the article

  • Mailbox move issue from Exchange 2003 to Exchange 2010

    - by Ryan Roussel
    Today while moving mailboxes between Exchange 2003 and Exchange 2010, I hit an issue with a couple of mailboxes.  These mailboxes all popped access denied errors or more exactly: Insufficient Access Rights to perform the operation.   The cause was similar to the mail flow issue in that inheritable permissions were not turned on for the user object in Active Directory.  This also presented it’s own unique problem in that since the initial move request failed because of permissions, it had to be cleared before a new move request could be created. On top of that, the request did not show up in the EMC.  I used the following process to clear the request, assign permission, then create a new request:   1. First you need to know the ExchangeGUID of the mailbox for the remove-moverequest command.  To quickly get the GUID for a mailbox simply run:         2. Next we need to clear out the move request using PowerShell by running: [PS] c:\>Remove-moverequest -moverequestqueue "mailbox database 1030639620" -mailboxguid 8525686f-d4d3-42b7-92f1-46d77ea841a3   3. Then to re-establish inheritable permissions. This can be done by using AD Users and Computers, switching to View Advanced Features, then under the Security tab of the object.  Click Advanced, then check “allow inheritable permissions of parent to propagate to this object”   4. Once the Inheritable permissions are restored, we need to create a new move request: NOTE:  The EMC can also be used to initiate the Move Request once the permissions are corrected. [PS] c:\>New-moverequest –identity jyoung  -baditemlimit 100 -targetdatabase "mailbox database 1030639620"   And that’s it.  The mailbox should move over smoothly with no access denied error.

    Read the article

  • Issues with ILMerge, Lambda Expressions and VS2010 merging?

    - by John Blumenauer
    A little Background For quite some time now, it’s been possible to merge multiple .NET assemblies into a single assembly using ILMerge in Visual Studio 2008.  This is especially helpful when writing wrapper assemblies for 3rd-party libraries where it’s desirable to minimize the number of assemblies for distribution.  During the merge process, ILMerge will take a set of assemblies and merge them into a single assembly.  The resulting assembly can be either an executable or a DLL and is identified as the primary assembly. Issue During a recent project, I discovered using ILMerge to merge assemblies containing lambda expressions in Visual Studio 2010 is resulting in invalid primary assemblies.  The code below is not where the initial issue was identified, I will merely use it to illustrate the problem at hand. In order to describe the issue, I created a console application and a class library for calculating a few math functions utilizing lambda expressions.  The code is available for download at the bottom of this blog entry. MathLib.cs using System; namespace MathLib { public static class MathHelpers { public static Func<double, double, double> Hypotenuse = (x, y) => Math.Sqrt(x * x + y * y); static readonly Func<int, int, bool> divisibleBy = (int a, int b) => a % b == 0; public static bool IsPrimeNumber(int x) { { for (int i = 2; i <= x / 2; i++) if (divisibleBy(x, i)) return false; return true; }; } } } Program.cs using System; using MathLib; namespace ILMergeLambdasConsole { class Program { static void Main(string[] args) { int n = 19; if (MathHelpers.IsPrimeNumber(n)) { Console.WriteLine(n + " is prime"); } else { Console.WriteLine(n + " is not prime"); } Console.ReadLine(); } } } Not surprisingly, the preceding code compiles, builds and executes without error prior to running the ILMerge tool.   ILMerge Setup In order to utilize ILMerge, the following changes were made to the project. The MathLib.dll assembly was built in release configuration and copied to the MathLib folder.  The following folder hierarchy was used for this example:   The project file for ILMergeLambdasConsole project file was edited to add the ILMerge post-build configuration.  The following lines were added near the bottom of the project file:  <Target Name="AfterBuild" Condition="'$(Configuration)' == 'Release'"> <Exec Command="&quot;..\..\lib\ILMerge\Ilmerge.exe&quot; /ndebug /out:@(MainAssembly) &quot;@(IntermediateAssembly)&quot; @(ReferenceCopyLocalPaths->'&quot;%(FullPath)&quot;', ' ')" /> <Delete Files="@(ReferenceCopyLocalPaths->'$(OutDir)%(DestinationSubDirectory)%(Filename)%(Extension)')" /> </Target> The ILMergeLambdasConsole project was modified to reference the MathLib.dll located in the MathLib folder above. ILMerge and ILMerge.exe.config was copied into the ILMerge folder shown above.  The contents of ILMerge.exe.config are: <?xml version="1.0" encoding="utf-8" ?> <configuration> <startup useLegacyV2RuntimeActivationPolicy="true"> <requiredRuntime safemode="true" imageVersion="v4.0.30319" version="v4.0.30319"/> </startup> </configuration> Post-ILMerge After compiling and building, the MathLib.dll assembly will be merged into the ILMergeLambdasConsole executable.  Unfortunately, executing ILMergeLambdasConsole.exe now results in a crash.  The ILMerge documentation recommends using PEVerify.exe to validate assemblies after merging.  Executing PEVerify.exe against the ILMergeLambdasConsole.exe assembly results in the following error:    Further investigation by using Reflector reveals the divisibleBy method in the MathHelpers class looks a bit questionable after the merge.     Prior to using ILMerge, the same divisibleBy method appeared as the following in Reflector: It’s pretty obvious something has gone awry during the merge process.  However, this is only occurring when building within the Visual Studio 2010 environment.  The same code and configuration built within Visual Studio 2008 executes fine.  I’m still investigating the issue.  If anyone has already experienced this situation and solved it, I would love to hear from you.  However, as of right now, it looks like something has gone terribly wrong when executing ILMerge against assemblies containing Lambdas in Visual Studio 2010. Solution Files ILMergeLambdaExpression

    Read the article

  • How Visual Studio 2010 and Team Foundation Server enable Compliance

    - by Martin Hinshelwood
    One of the things that makes Team Foundation Server (TFS) the most powerful Application Lifecycle Management (ALM) platform is the traceability it provides to those that use it. This traceability is crucial to enable many companies to adhere to many of the Compliance regulations to which they are bound (e.g. CFR 21 Part 11 or Sarbanes–Oxley.)   From something as simple as relating Tasks to Check-in’s or being able to see the top 10 files in your codebase that are causing the most Bugs, to identifying which Bugs and Requirements are in which Release. All that information is available and more in TFS. Although all of this tradability is available within TFS you do need to understand that it is not for free. Well… I say that, but if you are using TFS properly you will have this information with no additional work except for firing up the reporting. Using Visual Studio ALM and Team Foundation Server you can relate every line of code changes all the way up to requirements and back down through Test Cases to the Test Results. Figure: The only thing missing is Build In order to build the relationship model below we need to examine how each of the relationships get there. Each member of your team from programmer to tester and Business Analyst to Business have their roll to play to knit this together. Figure: The relationships required to make this work can get a little confusing If Build is added to this to relate Work Items to Builds and with knowledge of which builds are in which environments you can easily identify what is contained within a Release. Figure: How are things progressing Along with the ability to produce the progress and trend reports the tractability that is built into TFS can be used to fulfil most audit requirements out of the box, and augmented to fulfil the rest. In order to understand the relationships, lets look at each of the important Artifacts and how they are associated with each other… Requirements – The root of all knowledge Requirements are the thing that the business cares about delivering. These could be derived as User Stories or Business Requirements Documents (BRD’s) but they should be what the Business asks for. Requirements can be related to many of the Artifacts in TFS, so lets look at the model: Figure: If the centre of the world was a requirement We can track which releases Requirements were scheduled in, but this can change over time as more details come to light. Figure: Who edited the Requirement and when There is also the ability to query Work Items based on the History of changed that were made to it. This is particularly important with Requirements. It might not be enough to say what Requirements were completed in a given but also to know which Requirements were ever assigned to a particular release. Figure: Some magic required, but result still achieved As an augmentation to this it is also possible to run a query that shows results from the past, just as if we had a time machine. You can take any Query in the system and add a “Asof” clause at the end to query historical data in the operational store for TFS. select <fields> from WorkItems [where <condition>] [order by <fields>] [asof <date>] Figure: Work Item Query Language (WIQL) format In order to achieve this you do need to save the query as a *.wiql file to your local computer and edit it in notepad, but one imported into TFS you run it any time you want. Figure: Saving Queries locally can be useful All of these Audit features are available throughout the Work Item Tracking (WIT) system within TFS. Tasks – Where the real work gets done Tasks are the work horse of the development team, but they only as useful as Excel if you do not relate them properly to other Artifacts. Figure: The Task Work Item Type has its own relationships Requirements should be broken down into Tasks that the development team work from to build what is required by the business. This may be done by a small dedicated group or by everyone that will be working on the software team but however it happens all of the Tasks create should be a Child of a Requirement Work Item Type. Figure: Tasks are related to the Requirement Tasks should be used to track the day-to-day activities of the team working to complete the software and as such they should be kept simple and short lest developers think they are more trouble than they are worth. Figure: Task Work Item Type has a narrower purpose Although the Task Work Item Type describes the work that will be done the actual development work involves making changes to files that are under Source Control. These changes are bundled together in a single atomic unit called a Changeset which is committed to TFS in a single operation. During this operation developers can associate Work Item with the Changeset. Figure: Tasks are associated with Changesets   Changesets – Who wrote this crap Changesets themselves are just an inventory of the changes that were made to a number of files to complete a Task. Figure: Changesets are linked by Tasks and Builds   Figure: Changesets tell us what happened to the files in Version Control Although comments can be changed after the fact, the inventory and Work Item associations are permanent which allows us to Audit all the way down to the individual change level. Figure: On Check-in you can resolve a Task which automatically associates it Because of this we can view the history on any file within the system and see how many changes have been made and what Changesets they belong to. Figure: Changes are tracked at the File level What would be even more powerful would be if we could view these changes super imposed over the top of the lines of code. Some people call this a blame tool because it is commonly used to find out which of the developers introduced a bug, but it can also be used as another method of Auditing changes to the system. Figure: Annotate shows the lines the Annotate functionality allows us to visualise the relationship between the individual lines of code and the Changesets. In addition to this you can create a Label and apply it to a version of your version control. The problem with Label’s is that they can be changed after they have been created with no tractability. This makes them practically useless for any sort of compliance audit. So what do you use? Branches – And why we need them Branches are a really powerful tool for development and release management, but they are most important for audits. Figure: One way to Audit releases The R1.0 branch can be created from the Label that the Build creates on the R1 line when a Release build was created. It can be created as soon as the Build has been signed of for release. However it is still possible that someone changed the Label between this time and its creation. Another better method can be to explicitly link the Build output to the Build. Builds – Lets tie some more of this together Builds are the glue that helps us enable the next level of tractability by tying everything together. Figure: The dashed pieces are not out of the box but can be enabled When the Build is called and starts it looks at what it has been asked to build and determines what code it is going to get and build. Figure: The folder identifies what changes are included in the build The Build sets a Label on the Source with the same name as the Build, but the Build itself also includes the latest Changeset ID that it will be building. At the end of the Build the Build Agent identifies the new Changesets it is building by looking at the Check-ins that have occurred since the last Build. Figure: What changes have been made since the last successful Build It will then use that information to identify the Work Items that are associated with all of the Changesets Changesets are associated with Build and change the “Integrated In” field of those Work Items . Figure: Find all of the Work Items to associate with The “Integrated In” field of all of the Work Items identified by the Build Agent as being integrated into the completed Build are updated to reflect the Build number that successfully integrated that change. Figure: Now we know which Work Items were completed in a build Now that we can link a single line of code changed all the way back through the Task that initiated the action to the Requirement that started the whole thing and back down to the Build that contains the finished Requirement. But how do we know wither that Requirement has been fully tested or even meets the original Requirements? Test Cases – How we know we are done The only way we can know wither a Requirement has been completed to the required specification is to Test that Requirement. In TFS there is a Work Item type called a Test Case Test Cases enable two scenarios. The first scenario is the ability to track and validate Acceptance Criteria in the form of a Test Case. If you agree with the Business a set of goals that must be met for a Requirement to be accepted by them it makes it both difficult for them to reject a Requirement when it passes all of the tests, but also provides a level of tractability and validation for audit that a feature has been built and tested to order. Figure: You can have many Acceptance Criteria for a single Requirement It is crucial for this to work that someone from the Business has to sign-off on the Test Case moving from the  “Design” to “Ready” states. The Second is the ability to associate an MS Test test with the Test Case thereby tracking the automated test. This is useful in the circumstance when you want to Track a test and the test results of a Unit Test designed to test the existence of and then re-existence of a a Bug. Figure: Associating a Test Case with an automated Test Although it is possible it may not make sense to track the execution of every Unit Test in your system, there are many Integration and Regression tests that may be automated that it would make sense to track in this way. Bug – Lets not have regressions In order to know wither a Bug in the application has been fixed and to make sure that it does not reoccur it needs to be tracked. Figure: Bugs are the centre of their own world If the fix to a Bug is big enough to require that it is broken down into Tasks then it is probably a Requirement. You can associate a check-in with a Bug and have it tracked against a Build. You would also have one or more Test Cases to prove the fix for the Bug. Figure: Bugs have many associations This allows you to track Bugs / Defects in your system effectively and report on them. Change Request – I am not a feature In the CMMI Process template Change Requests can also be easily tracked through the system. In some cases it can be very important to track Change Requests separately as an Auditor may want to know what was changed and who authorised it. Again and similar to Bugs, if the Change Request is big enough that it would require to be broken down into Tasks it is in reality a new feature and should be tracked as a Requirement. Figure: Make sure your Change Requests only Affect Requirements and not rewrite them Conclusion Visual Studio 2010 and Team Foundation Server together provide an exceptional Application Lifecycle Management platform that can help your team comply with even the harshest of Compliance requirements while still enabling them to be Agile. Most Audits are heavy on required documentation but most of that information is captured for you as long a you do it right. You don’t even need every team member to understand it all as each of the Artifacts are relevant to a different type of team member. Business Analysts manage Requirements and Change Requests Programmers manage Tasks and check-in against Change Requests and Bugs Testers manage Bugs and Test Cases Build Masters manage Builds Although there is some crossover there are still rolls or “hats” that are worn. Do you thing this is all achievable? Have I missed anything that you think should be there?

    Read the article

  • BRE (Business Rules Engine) Data Services is out...!!!

    - by Vishal
    A few months ago we at Tellago had open sourced the BizTalk Data Services. We were meanwhile working on other artifacts which comes along with BizTalk Server like the “Business Rules Engine”.  We are happy to announce the first version of BRE Data Services. BRE Data Services is a same concept which we covered through BTS Data Services, providing a RESTFul OData – based API to interact with the Business Rules Engine via HTTP using ATOM Publishing Protocol or JSON as the encoding mechanism.   In the first version release, we mainly focused on the browsing, querying and searching BRE artifacts via a RESTFul interface. Also along with that we provide the functionality to execute Business Rules by inserting the Facts for policies via the IUpdatable implementation of WCF Data Services.   The BRE Data Services API provides a lightweight interface for managing Business Rules Engine artifacts such as Policies, Rules, Vocabularies, Conditions, Actions, Facts etc. The following are some examples which details some of the available features in the current version of the API.   Basic Querying: Querying BRE Policies http://localhost/BREDataServices/BREMananagementService.svc/Policies Querying BRE Rules http://localhost/BREDataServices/BREMananagementService.svc/Rules Querying BRE Vocabularies http://localhost/BREDataServices/BREMananagementService.svc/Vocabularies   Navigation: The BRE Data Services API also leverages WCF Data Services to enable navigation across related different BRE objects. Querying a specific Policy http://localhost/BREDataServices/BREMananagementService.svc/Policies(‘PolicyName’) Querying a specific Rule http://localhost/BREDataServices/BREMananagementService.svc/Rules(‘RuleName’) Querying all Rules under a Policy http://localhost/BREDataServices/BREMananagementService.svc/Policies('PolicyName')/Rules Querying all Facts under a Policy http://localhost/BREDataServices/BREMananagementService.svc/Policies('PolicyName')/Facts Querying all Actions for a specific Rule http://localhost/BREDataServices/BREMananagementService.svc/Rules('RuleName')/Actions Querying all Conditions for a specific Rule http://localhost/BREDataServices/BREMananagementService.svc/Rules('RuleName')/Actions Querying a specific Vocabulary: http://localhost/BREDataServices/BREMananagementService.svc/Vocabularies('VocabName')   Implementation: With the BRE Data Services, we also provide the functionality of executing a particular policy via HTTP. There are couple of ways you can do that though the API.   Ø First is though Service Operations feature of WCF Data Services in which you can execute the Facts by passing them in the URL itself. This is a very simple implementations of the executing the policies due to the limitations & restrictions (only primitive types of input parameters which can be passed) currently of the Service Operations of the WCF Data Services. Below is a code sample.                Below is a traced Request/Response message.                                 Ø Second is through the IUpdatable Interface of WCF Data Services. In this method, you can first query the rule which you want to execute and then inserts Facts for that particular Rules and finally when you perform the SaveChanges() call for the IUpdatable Interface API, it executes the policy with the facts which you inserted at runtime. Below is a sample of client side code. Due to the limitations of current version of WCF Data Services where there is no way you can return back the updates happening on the service side back to the client via the SaveChanges() method. Here we are executing the rule passing a serialized XML as Facts and there is no changes made to any data where we can query back to fetch the changes. This is overcome though the first way to executing the policies which is by executing it as a Service Operation call.     This actually generates a AtomPub message shown as below:   POST /Tellago.BRE.REST.ServiceHost/BREMananagementService.svc/$batch HTTP/1.1 User-Agent: Microsoft ADO.NET Data Services DataServiceVersion: 1.0;NetFx MaxDataServiceVersion: 2.0;NetFx Accept: application/atom+xml,application/xml Accept-Charset: UTF-8 Content-Type: multipart/mixed; boundary=batch_6b9a5ced-5ecb-4585-940a-9d5e704c28c7 Host: localhost:8080 Content-Length: 1481 Expect: 100-continue   --batch_6b9a5ced-5ecb-4585-940a-9d5e704c28c7 Content-Type: multipart/mixed; boundary=changeset_184a8c59-a714-4ba9-bb3d-889a88fe24bf   --changeset_184a8c59-a714-4ba9-bb3d-889a88fe24bf Content-Type: application/http Content-Transfer-Encoding: binary   MERGE http://localhost:8080/Tellago.BRE.REST.ServiceHost/BREMananagementService.svc/Facts('TestPolicy') HTTP/1.1 Content-ID: 4 Content-Type: application/atom+xml;type=entry Content-Length: 927   <?xml version="1.0" encoding="utf-8" standalone="yes"?> <entry xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" font-size: x-small"http://www.w3.org/2005/Atom">   <category scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme" term="Tellago.BRE.REST.Resources.Fact" />   <title />   <author>     <name />   </author>   <updated>2011-01-31T20:09:15.0023982Z</updated>   <id>http://localhost:8080/Tellago.BRE.REST.ServiceHost/BREMananagementService.svc/Facts('TestPolicy')</id>   <content type="application/xml">     <m:properties>       <d:FactInstance>&lt;ns0:LoanStatus xmlns:ns0="http://tellago.com"&gt;&lt;Age&gt;10&lt;/Age&gt;&lt;Status&gt;true&lt;/Status&gt;&lt;/ns0:LoanStatus&gt;</d:FactInstance>       <d:FactType>TestSchema</d:FactType>       <d:ID>TestPolicy</d:ID>     </m:properties>   </content> </entry> --changeset_184a8c59-a714-4ba9-bb3d-889a88fe24bf-- --batch_6b9a5ced-5ecb-4585-940a-9d5e704c28c7—     Installation: The installation of the BRE Data Services is pretty straight forward. ·         Create a new IIS website say BREDataServices. ·         Download the SourceCode from TellagoCodeplex and copy the content from Tellago.BRE.REST.ServiceHost to the physical location of the above created website.     ·         The appPool account running the website should have admin access to the BizTalkRuleEngineDb database. ·         TheRight click the BREManagementService.svc in the IIS ContentView for the website and wala..     Conclusion: The BRE Data Services API is an experiment intended to bring the capabilities of RESTful/OData based services to the Traditional BTS/BRE Solutions. The future releases will target on technologies like BAM, ESB Toolkit. This version has been tested with various version of BizTalk Server and we have uploaded the source code to our Tellago's DevLabs workspace at Codeplex. I hope you guys enjoy this release. Keep an eye on our new releases @ Tellago Codeplex. We are working on various other Biztalk Artifacts like BAM, ESB Toolkit.     Till than happy BizzRuling…!!!     Thanks,   Vishal Mody

    Read the article

  • Silverlight Cream Monday WP7 App Review # 1

    - by Dave Campbell
    I'm going to try something here... if it seems useful, I'll continue, if it doesn't, I'll stop... so give me feedback! There are *lots* of Apps in the WP7 Marketplace, and heaven help me, but the Marketplace sucks for finding stuff. I won't rehash what's already been said in the blogs, but I agree with one and all. I went out last Saturday to find 2 apps that I knew were released, and couldn't do so on my device. Even in the Zune app, it took quite a while to find them... ok, I'll back off a bit, because I just found out I can do 'Search' now if I know the name... I didn't think that was working before. So my thought is on Monday (like today), I will post a review of 5 apps/games I either use or have played with on my device. These are strictly my opinions, you understand, but hey... it's better than a poke in the eye with an iPhone! A few disclaimers:     Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week, and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. In this Issue:   Jingo! is the first app I bought, just to see what the experience was like. It's very much like a game we used to play in school in the Army in 1971 on paper we passed around. Sort of a cross between hangman and Mastermind, you try to figure out the hidden word in 5 tries. You get really good at 5-letter words after a while. I like this because you have to think, and you're not pressured by a clock Jingo! is by James Furdell and is $1.99 I reviewed René Schulte's Pictures Lab a while back, and have not changed my mind. This is an excellent app for playing with any photo on your device... one you've just taken, one you've synced from your PC, or one you've saved from email. I like this because you can get some cool effects for your photos, and it just works. Pictures Lab is by Schulte Software Development and is $1.99 Since I work as a consultant, and from home, I wanted something I could track my time with. I've test-driven all the contenders I could find so far on the phone, and so far I like ONTRACK! the best. If asked, I have some suggestions, but it's probably just the way I work or think. What I do like is I can tap a project to start/stop/restart a counter, and at the end of the day it shows me how much time I've been working. If there's a way to make an adjustment in case you forget to tap the counter, I don't know how to do it, and that's my biggest complaint. I like this because you can get a daily readout which you can also email as a spreadsheet. The daily results display is very good. ONTRACK! is by Qmino and is $2.99 Remember Item 4 above... I've been playing guitar for 48 years... obviously since before the invention of 'tuners', so I'm not as dependent upon these as some folks are. I've tried some in the past and have always felt I can do just as good by ear (I have perfect relative pitch). So, I gave this app by András Velvárt a dance just to see how it works, and it is surprisingly good. If you're used to one of the stage tuners this may take a little getting used to, but it does the job. The difference with this one is there is no real 'null' point inside which you can think your guitar is in tune. The soundwave stays visible on the device, and if it's moving to the right, your string is flat, if it's moving to the left, your string is sharp. Getting it exact might be tricky, but it is exact! If you need to rely on a tuner, this is a good choice in my opinion, exactly because of the sensitivity.. tune up with this and you're dead-on. Guitar Tuner is by Kinabalu Innovation Limited and is $0.99 Popper 2 is the WP7 version of a wildly popular game by Bill Reiss named Dr. Popper. You can get a trial, or you can now get a free lite version of the game. Popper 2 is a fast-paced bubble breaker game. I find it something fun to play when I just want to buzz out, but maybe the best review is that my daughter didn't want to give my phone back when I showed it to her, and always wants to grab my phone to play 'that game'. A fun distraction with great graphics and a great price Popper 2 is by Blue Rose Systems, LLC and is $1.29 Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light!   Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • PostSharp deployment to build machine- use Setup installation, not NuGet package.

    - by Michael Freidgeim
    PostSharp has well documented different methods of installation. I've chosen installing NuGet packages, because according to  Deploying PostSharp into a Source Repository NuGet is the easiest way to add PostSharp to a project without installing the product on every machine. However it didn't work well for me. I've added PostSharp NuGet package to one project in the solution.  When I wanted to use PostSharp in other project, Visual Studio tab showed that PostSharp is not enabled for this project I've added the NuGet package to the new project, which installed a new version of the package in the new Packages subfolder. When I wanted to refer PostSharp from the third project, I've ended up with another version of PostSharp installed. Additionally multiple versions of Diagnostics were created. It definitely causes confusion and errors.   More problems we experienced on build server. According to Using PostSharp on a Build Server "If you chose to deploy PostSharp in the source repository, it does not need to be installed specifically on the build server. " It didn't work on our build server. I kept getting errors "The "AddIns" parameter is not supported by the "PostSharp21" task." and "The "DisableSystemBindingPolicies" parameter is not supported by the "PostSharp21" task."   From my experience the only way to have the latest version of PostSharp working on the build server is to install it using Setup as described in Deploying PostSharp with the Setup Program     Gael acknowledged the issues with possible version conflicts. see http://support.sharpcrafters.com/discussions/problems/388-the-postsharp21-task-failed-unexpectedly

    Read the article

  • Azure Service Bus - Authorization failure

    - by Michael Stephenson
    I fell into this trap earlier in the week with a mistake I made when configuring a service to send and listen on the azure service bus and I thought it would be worth a little note for future reference as I didnt find anything online about it.  After configuring everything when I ran my code sample I was getting the below error. WebHost failed to process a request.Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/28316044Exception: System.ServiceModel.ServiceActivationException: The service '/-------/BrokeredMessageService.svc' cannot be activated due to an exception during compilation.  The exception message is: Generic: There was an authorization failure. Make sure you have specified the correct SharedSecret, SimpleWebToken or Saml transport client credentials.. ---> Microsoft.ServiceBus.AuthorizationFailedException: Generic: There was an authorization failure. Make sure you have specified the correct SharedSecret, SimpleWebToken or Saml transport client credentials.   at Microsoft.ServiceBus.RelayedOnewayTcpClient.ConnectRequestReplyContext.Send(Message message, TimeSpan timeout, IDuplexChannel& channel)   at Microsoft.ServiceBus.RelayedOnewayTcpListener.RelayedOnewayTcpListenerClient.Connect(TimeSpan timeout)   at Microsoft.ServiceBus.RelayedOnewayTcpClient.EnsureConnected(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.CommunicationObject.Open(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.RefcountedCommunicationObject.Open(TimeSpan timeout)   at Microsoft.ServiceBus.RelayedOnewayChannelListener.OnOpen(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.CommunicationObject.Open(TimeSpan timeout)   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)   at Microsoft.ServiceBus.SocketConnectionTransportManager.OnOpen(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.TransportManager.Open(TimeSpan timeout, TransportChannelListener channelListener)   at Microsoft.ServiceBus.Channels.TransportManagerContainer.Open(TimeSpan timeout, SelectTransportManagersCallback selectTransportManagerCallback)   at Microsoft.ServiceBus.SocketConnectionChannelListener`2.OnOpen(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.CommunicationObject.Open(TimeSpan timeout)   at Microsoft.ServiceBus.Channels.CommunicationObject.Open(TimeSpan timeout)   at System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen(TimeSpan timeout)   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath)   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)   --- End of inner exception stack trace ---   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)   at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)Process Name: w3wpProcess ID: 8056As recommended by the error message I checked everything about the application configuration and also the keys and eventually I found the problem.When I set the permissions in the ACS rule group I had copied and pasted the claim name for net.windows.servicebus.action from the Azure portal and hadnt spotted the <space> character on the end of it like you sometimes pick up when copying text in the browser.  This meant that the listen and send permissions were not setup correctly which is why (as you would expect) my two applications could not connect to the service bus.So lesson learnt here, if you do copy and paste into the ACS rules just be careful you dont leave a space on the end of anything otherwise it will be difficult to spot that its configured incorrectly

    Read the article

< Previous Page | 102 103 104 105 106 107 108 109 110 111 112 113  | Next Page >