Search Results

Search found 5701 results on 229 pages for 'cpu cooler'.

Page 107/229 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

• e2fsck extremely slow, although enough memory exists

  - by kaefert

  I've got this external USB-Disk: kaefert@blechmobil:~$ lsusb -s 2:3 Bus 002 Device 003: ID 0bc2:3320 Seagate RSS LLC As can be seen in this dmesg output, there is some problem that prevents that disk from beeing mounted: kaefert@blechmobil:~$ dmesg ... [ 113.084079] usb 2-1: new high-speed USB device number 3 using ehci_hcd [ 113.217783] usb 2-1: New USB device found, idVendor=0bc2, idProduct=3320 [ 113.217787] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 113.217790] usb 2-1: Product: Expansion Desk [ 113.217792] usb 2-1: Manufacturer: Seagate [ 113.217794] usb 2-1: SerialNumber: NA4J4N6K [ 113.435404] usbcore: registered new interface driver uas [ 113.455315] Initializing USB Mass Storage driver... [ 113.468051] scsi5 : usb-storage 2-1:1.0 [ 113.468180] usbcore: registered new interface driver usb-storage [ 113.468182] USB Mass Storage support registered. [ 114.473105] scsi 5:0:0:0: Direct-Access Seagate Expansion Desk 070B PQ: 0 ANSI: 6 [ 114.474342] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.475089] sd 5:0:0:0: [sdb] Write Protect is off [ 114.475092] sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 114.475959] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 114.477093] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.501649] sdb: sdb1 [ 114.502717] sd 5:0:0:0: [sdb] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB) [ 114.504354] sd 5:0:0:0: [sdb] Attached SCSI disk [ 116.804408] EXT4-fs (sdb1): ext4_check_descriptors: Checksum for group 3976 failed (47397!=61519) [ 116.804413] EXT4-fs (sdb1): group descriptors corrupted! ... So I went and fired up my favorite partition manager - gparted, and told it to verify and repair the partition sdb1. This made gparted call e2fsck (version 1.42.4 (12-Jun-2012)) e2fsck -f -y -v /dev/sdb1 Although gparted called e2fsck with the "-v" option, sadly it doesn't show me the output of my e2fsck process (bugreport https://bugzilla.gnome.org/show_bug.cgi?id=467925 ) I started this whole thing on Sunday (2012-11-04_2200) evening, so about 48 hours ago, this is what htop says about it now (2012-11-06-1900): PID USER PRI NI VIRT RES SHR S CPU% MEM% TIME+ Command 3704 root 39 19 1560M 1166M 768 R 98.0 19.5 42h56:43 e2fsck -f -y -v /dev/sdb1 Now I found a few posts on the internet that discuss e2fsck running slow, for example: http://gparted-forum.surf4.info/viewtopic.php?id=13613 where they write that its a good idea to see if the disk is just that slow because maybe its damaged, and I think these outputs tell me that this is not the case in my case: kaefert@blechmobil:~$ sudo hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 3562 MB in 2.00 seconds = 1783.29 MB/sec Timing buffered disk reads: 82 MB in 3.01 seconds = 27.26 MB/sec kaefert@blechmobil:~$ sudo hdparm /dev/sdb /dev/sdb: multcount = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 364801/255/63, sectors = 5860533160, start = 0 However, although I can read quickly from that disk, this disk speed doesn't seem to be used by e2fsck, considering tools like gkrellm or iotop or this: kaefert@blechmobil:~$ iostat -x Linux 3.2.0-2-amd64 (blechmobil) 2012-11-06 _x86_64_ (2 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 14,24 47,81 14,63 0,95 0,00 22,37 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await r_await w_await svctm %util sda 0,59 8,29 2,42 5,14 43,17 160,17 53,75 0,30 39,80 8,72 54,42 3,95 2,99 sdb 137,54 5,48 9,23 0,20 587,07 22,73 129,35 0,07 7,70 7,51 16,18 2,17 2,04 Now I researched a little bit on how to find out what e2fsck is doing with all that processor time, and I found the tool strace, which gives me this: kaefert@blechmobil:~$ sudo strace -p3704 lseek(4, 41026998272, SEEK_SET) = 41026998272 write(4, "\212\354K[_\361\3nl\212\245\352\255jR\303\354\312Yv\334p\253r\217\265\3567\325\257\3766"..., 4096) = 4096 lseek(4, 48404766720, SEEK_SET) = 48404766720 read(4, "\7t\260\366\346\337\304\210\33\267j\35\377'\31f\372\252\ffU\317.y\211\360\36\240c\30`\34"..., 4096) = 4096 lseek(4, 41027002368, SEEK_SET) = 41027002368 write(4, "\232]7Ws\321\352\t\1@[+5\263\334\276{\343zZx\352\21\316`1\271[\202\350R`"..., 4096) = 4096 lseek(4, 48404770816, SEEK_SET) = 48404770816 read(4, "\17\362r\230\327\25\346//\210H\v\311\3237\323K\304\306\361a\223\311\324\272?\213\tq \370\24"..., 4096) = 4096 lseek(4, 41027006464, SEEK_SET) = 41027006464 write(4, "\367yy>x\216?=\324Z\305\351\376&\25\244\210\271\22\306}\276\237\370(\214\205G\262\360\257#"..., 4096) = 4096 lseek(4, 48404774912, SEEK_SET) = 48404774912 read(4, "\365\25\0\21|T\0\21}3t_\272\373\222k\r\177\303\1\201\261\221$\261B\232\3142\21U\316"..., 4096) = 4096 ^CProcess 3704 detached around 16 of these lines every second, so 4 read and 4 write operations every second, which I don't consider to be a lot.. And finally, my question: Will this process ever finish? If those numbers from fseek (48404774912) represent bytes, that would be something like 45 gigabytes, with this beeing a 3 terrabyte disk, which would give me 134 days to go, if the speed stays constant, and e2fsck scans the disk like this completly and only once. Do you have some advice for me? I have most of the data on that disk elsewhere, but I've put a lot of hours into sorting and merging it to this disk, so I would prefer to getting this disk up and running again, without formatting it anew. I don't think that the hardware is damaged since the disk is only a few months and since I can't see any I/O errors in the dmesg output. UPDATE: I just looked at the strace output again (2012-11-06_2300), now it looks like this: lseek(4, 1419860611072, SEEK_SET) = 1419860611072 read(4, "3#\f\2447\335\0\22A\355\374\276j\204'\207|\217V|\23\245[\7VP\251\242\276\207\317:"..., 4096) = 4096 lseek(4, 43018145792, SEEK_SET) = 43018145792 write(4, "]\206\231\342Y\204-2I\362\242\344\6R\205\361\324\177\265\317C\334V\324\260\334\275t=\10F."..., 4096) = 4096 lseek(4, 1419860615168, SEEK_SET) = 1419860615168 read(4, "\262\305\314Y\367\37x\326\245\226\226\320N\333$s\34\204\311\222\7\315\236\336\300TK\337\264\236\211n"..., 4096) = 4096 lseek(4, 43018149888, SEEK_SET) = 43018149888 write(4, "\271\224m\311\224\25!I\376\16;\377\0\223H\25Yd\201Y\342\r\203\271\24eG<\202{\373V"..., 4096) = 4096 lseek(4, 1419860619264, SEEK_SET) = 1419860619264 read(4, ";d\360\177\n\346\253\210\222|\250\352T\335M\33\260\320\261\7g\222P\344H?t\240\20\2548\310"..., 4096) = 4096 lseek(4, 43018153984, SEEK_SET) = 43018153984 write(4, "\360\252j\317\310\251G\227\335{\214`\341\267\31Y\202\360\v\374\307oq\3063\217Z\223\313\36D\211"..., 4096) = 4096 So the numbers in the lseek lines before the reads, like 1419860619264 are already a lot bigger, standing for 1.29 terabytes if those numbers are bytes, so it doesn't seem to be a linear progress on a big scale, maybe there are only some areas that need work, that have big gaps in between them. UPDATE2: Okey, big disappointment, the numbers are back to very small again (2012-11-07_0720) lseek(4, 52174548992, SEEK_SET) = 52174548992 read(4, "\374\312\22\\\325\215\213\23\0357U\222\246\370v^f(\312|f\212\362\343\375\373\342\4\204mU6"..., 4096) = 4096 lseek(4, 46603526144, SEEK_SET) = 46603526144 write(4, "\370\261\223\227\23?\4\4\217\264\320_Am\246CQ\313^\203U\253\274\204\277\2564n\227\177\267\343"..., 4096) = 4096 so either e2fsck goes over the data multiple times, or it just hops back and forth multiple times. Or my assumption that those numbers are bytes is wrong. UPDATE3: Since it's mentioned here http://forums.fedoraforum.org/showthread.php?t=282125&page=2 that you can testisk while e2fsck is running, i tried that, though not with a lot of success. When asking testdisk to display the data of my partition, this is what I get: TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org 1 P Linux 0 4 5 45600 40 8 732566272 Can't open filesystem. Filesystem seems damaged. And this is what strace currently gives me (2012-11-07_1030) lseek(4, 212460343296, SEEK_SET) = 212460343296 read(4, "\315Mb\265v\377Gn \24\f\205EHh\2349~\330\273\203\3375\206\10\r3=W\210\372\352"..., 4096) = 4096 lseek(4, 47347830784, SEEK_SET) = 47347830784 write(4, "]\204\223\300I\357\4\26\33+\243\312G\230\250\371*m2U\t_\215\265J \252\342Pm\360D"..., 4096) = 4096 (times are in CET)

  Read the article

• Windows 7 - Virtual PC or Workstation 7.1 - Not working 4 me

  - by George

  I have a Windows 7 Ultimate - 64 bit Operating System When I'm trying to create virtual machine Windows Server 2008 64 bit I'm getting the same error neither with Virtual PC or Workstation 7.1 Error: 64 bit guest operating systems are not supported by this host and will not run and Status: 0xc000035a info: Attempting to load a 64 bit application however this CPU is not compatible with 64 bit mode. Is it any settings I'm missing or can you give me a suggestion about workaround, or what do I need to make it work.

  Read the article

• Does Windows 7 Home Premium support Dual Core Processors?

  - by nicon

  I'm looking to buy a new laptop (the new studio 14 from Dell). The processor for this laptop is an Intel Core i5-520M. Think link http://reviews.cnet.com/8301-31012_7-10379487-10355804.html says that it supports only 1 CPU. Also Dell recommend the Professionnal version even tough Home Premium is the default choice. So I'm a little confuse as does Windows 7 Home Premium support Dual Core Processors ?

  Read the article

• In Rackspace cloud, it is true that a 2GB server is faster than the default 256MB server?

  - by Alex

  For example...when I do string.find("..."), will it be faster because the CPU is allocated more?

  Read the article

• Drupal on an NFS share has terrible performance

  - by Marcus

  We have a setup where a Drupal 7 site with the following setup - a VMware ESXi 4.1 host server running a web vm and an NFS VM. The web VM is using Apache and mod_php. The site is still in development thus we have to turn off all forms of caching due to the frequently-updated files. Each page request takes around 15-20 seconds to complete. Profiling the PHP code shows that the vast majority of time (normally over 90%) is taking by all the is_dir(), is_file() function calls that load up the modules. I've increased PHP's realpath cache size to several megs and an strace shows that the lstat calls then drop from over 200 to around 6 and stat() decreases a bit (around 600 calls). However, while this has shaved off quite a bit of time, I am simply unable to break past the 10 second per request barrier. Is there a way to get better performance out of this setup that doesn't involve caching? Configs and stats: VMs: web - Centos 6 64bt, 2.5GB RAM, normal CPU/HD prioritisation nfs - Centos 6 64bt, 2GB RAM, normal CPU priority, high HD priority PHP: 32M realpath cache size (it's this high for testing purposes) NFS: ~]# egrep -v '#|^$' /etc/nfsmount.conf [ NFSMount_Global_Options ] Defaultvers=4 Ac=False Rsize=32k Wsize=32k Bsize=32k Reading speeds via NFS are not an issue a dd of a 100M test file using 32k blocks returns: 3200+0 records in 3200+0 records out 104857600 bytes (105 MB) copied, 1.84984 s, 56.7 MB/s real 0m1.857s user 0m0.007s sys 0m0.330s Strace on Apache process with empty realpath cache: % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 50.78 1.157452 337 3434 28 stat 32.58 0.742656 628 1182 425 open 9.29 0.211788 762 278 1 lstat 3.17 0.072322 0 237865 write 2.45 0.055839 490 114 13 access 0.45 0.010262 43 237 brk 0.34 0.007725 10 811 74 read 0.28 0.006340 9 679 fstat 0.22 0.005069 18 281 poll 0.20 0.004533 6 698 getdents 0.09 0.001960 10 190 mmap 0.05 0.001065 14 74 accept4 0.04 0.001000 333 3 chdir 0.03 0.000750 4 190 munmap 0.01 0.000339 0 836 close 0.01 0.000247 3 75 writev 0.00 0.000068 0 611 fcntl 0.00 0.000063 1 77 shutdown 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 5 socket 0.00 0.000000 0 5 5 connect 0.00 0.000000 0 74 getsockname 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 1 futex ------ ----------- ----------- --------- --------- ---------------- Strace after realpaths are cached % time seconds usecs/call calls errors syscall ------ ----------- ----------- --------- --------- ---------------- 60.14 1.371006 484 2831 28 stat 31.79 0.724705 627 1155 425 open 3.53 0.080354 0 237865 write 2.65 0.060433 530 114 13 access 0.43 0.009913 99 100 brk 0.38 0.008730 11 804 74 read 0.35 0.007910 12 675 fstat 0.30 0.006775 10 654 getdents 0.13 0.003065 11 281 poll 0.09 0.002000 333 6 1 lstat 0.07 0.001545 2 807 close 0.05 0.001063 14 74 accept4 0.04 0.001000 6 179 mmap 0.02 0.000404 2 179 munmap 0.01 0.000271 4 75 writev 0.01 0.000212 0 611 fcntl 0.01 0.000129 2 77 shutdown 0.00 0.000022 0 74 getsockname 0.00 0.000000 0 1 lseek 0.00 0.000000 0 5 rt_sigaction 0.00 0.000000 0 1 rt_sigprocmask 0.00 0.000000 0 3 setitimer 0.00 0.000000 0 3 socket 0.00 0.000000 0 3 3 connect 0.00 0.000000 0 15 setsockopt 0.00 0.000000 0 5 getcwd 0.00 0.000000 0 3 chdir ------ ----------- ----------- --------- --------- ---------------- Mount: nfs.xxx.xxx.xxx:/path/to/website/files on /path/to/website/files type nfs (rw,hard,intr,noac,vers=4,addr=xx.xx.xx.xx,clientaddr=xx.xx.xx.xx) Any help is, naturally, appreciated.

  Read the article

• Thinkpad Edge e320 thermal sensors description

  - by koressak

  I have a quite specific question concerning description of thermal sensors of my notebbok Thinkpad Edge E320. I have a debian linux installed with lm_sensors package and running command sensors show eight different values without any description of course (temp1 through temp6). I would like to know which one is which (cpu, gpu, hdd, etc.) Using google I didn't find any specific material concerning this exact model. Coult someone point me in the right direction? Thank you in advance.

  Read the article

• In a dual core processor, Do both the processors halt execution when an interrupt occurs ?

  - by kashyapa

  suppose two cores of a CPU are running two threads parallelly, and an interrupt occurs one on of them, does the other processor also stop execution ?

  Read the article

• VMWare Pre-Allocated vs. Growable, which is faster?

  - by tekiegreg

  In an effort to increase speed in my Vmware setup, I was thinking about converting a Windows XP Guest 32 bit I have from growable to pre-allocated, I'm currently running VMWare Workstation 7 with Windows 7 64 bit as the host. Specs: Dual Core CPU, one allocated to guest 4GB of RAM, 2GB to guest HD max capacity is 500GB, 150GB allocated to guest (I have 300GB left and don't mind parting with the space, currently HD is 80GB and converting would obviously add another 70GB of space), HD that guest is running on is separate from Host OS Either that or any other suggestions you have might be appreciated, thanks!

  Read the article

• How long will it take to create an OS backup image?

  - by user23950

  How much time will it take to backup 49GB? Here are the details: Windows 7 Dual core CPU 2.50 GHz 2GB memory I'll use the free version of Macrium Reflect. I will back it up to a Seagate portable hard-drive. I have installed: Microsoft Visual Studio 2008, NetBeans, and some CS4 Master Collection products. I only need to backup one partition.

  Read the article

• Is U.P.S necessary to have for PC?

  - by Jitendra vyas

  otherwise can my PC component ( Monitor, Motherboard, RAM, HDD, CPU, SMPS) get damage dues to suddenly power gone and come and due to power fluctuation. or it's only needed to shut down windows Properly. Can i face both Hardware and Software problems without UPS?

  Read the article

• MS Publisher 2003 - hangs when saving to desktop

  - by Chris

  We have a win 7 home prem pc, amd cpu, 8G ram, plenty of free disk space. Whenever user is working in publisher 20003, and tries to save a publisher 2003 document to the desktop, the save as dialog hangs and takes 2-3 minutes to display the desktop save location. I've tested excel 2003, it has no problems immediately displaying the desktop save as location and saving the file.

  Read the article

• installation of mac 10.6.2

  - by mahesh

  hi i installed vmware workstation 7.0 in windows,and it working well.i installed mac os 10.4.8 in it as a guest it is alo working well,but while installin mac os 10.6.2 it dont installed and shows an error as "invalid front-side bus freqency 66000000 hz. disablin the cpu." please help me how to solve this and please suggest any link to easyly understand installation if mac os 10.6.2

  Read the article

• What desktop boards support VT-D or IOMMU?

  - by Jeff Shattock

  I'm looking for a desktop board that supports either VT-D (Intel) or IOMMU (AMD) technology. This is the IO virtualization technology, not VT-x for CPU virtualization. I've found a list of chipsets that are purported to have this, but every board I look at, the vendor has decided to not support that feature. I would really prefer a desktop board over a server board for this. Does anyone have a specific model that is known to support this technology?

  Read the article

• Which PC components make the biggest impact on your compile times for Visual Studio?

  - by Rob Allen

  Which PC specifications have the biggest impact on your compile times? Disk? Clock speed? Number of CPU cores?

  Read the article

• Why does System Properties display two different frequencies?

  - by AngryHacker

  My System Properties window has the below text (also see screenshot). What does the "1.20 GHz " refer to? Hewlett-PackardHP Compaq dc7700p ConvertibleIntel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz 1.20 GHz 3.50 GB of RAMPhysical Address Extension

  Read the article

• Leopard Macbook very slow after waking up from sleep / cron?

  - by yairchu

  Problem: Occasionally, my Macbook becomes very slow after waking up from sleep I open Activity Monitor and notice some processes like makewhatis are taking 100% CPU I kill the process[es] and then everything works fine again Questions: My guess is that these processes are cron jobs. Is that correct? Is it ok to kill them? Is there a way to make this problem not happen? Is this fixed on Snow Leopard? I'm using Leopard (10.5.8) on a MacBook5,1

  Read the article

• Looking for old version of JBuilder

  - by mtgrares

  I'm looking for any of these versions:JBuilder 3-9. The reason for this is because my computer is old (256 MB, 800 Mhz cpu) but I still like to program. (Yes, I should upgrade my computer but greenbacks don't grow on trees.) And to prove that I really do program, I have an open source project where you play the trading card game Magic: The Gathering against the computer, http://code.google.com/p/cardforge The latest version was downloaded 1,862 times.

  Read the article

• How do I stop Ubuntu from hanging due to processes going into 'disk sleep'?

  - by joeforker

  I'm using Ubuntu 9.04 64 bit on an AMD. It regularly hangs for a few minutes at a time when some of the processes's CPU usage % goes into 'disk sleep'. During that time I can't start new programs and most of the programs on the desktop become unresponsive. I would rather it didn't hang and my applications remained reliably responsive. Why does this happen and how can I stop it?

  Read the article

• what virtual machine should dell poweredg sc 1425 install?

  - by Nguyen Khanh Huy

  I'm intalling our local server and want to install a virtual machine but it seem vmware ESXi is not suit with our server Server: Dell SC 1424 CPU : 2 Xeon 3.2G (buss 800, cache L2 2M) Ram: 6G DDR ECC 266 Hard disk: 2 Hitachi Sata 1TB. Raid Dell Cerc 2s ( raid 0, 1) Nic: 2 Broadcom 1Gb/s I'm wondering if you're familiar with this area and have any idea about a VM software for our server. Just wanted to use server for some purposes ( web hosting, subversion and to experience some server OSs) Thank you for helping.

  Read the article

• Turn Off File Journaling, Then Turning It On?

  - by Yar

  One of my programs recommends that I turn off file journaling to minimize CPU usage. However, file journaling is important. Can I turn it back on when I'm done running that program, or is it not to be thought of as a toggle?

  Read the article

• Bacula optimization/profiling tools

  - by pufferfish

  I'm trying to get an idea of where the bottlenecks are in our backup system. Are there tools available for profiling this? If not, any pointers to a home grown method would also help. I guess most of the info would be in the bacula logs, but I'd also like to see things like what gets saturated during despooling: disk, CPU or network? This feels like a problem most bacula admins would have encountered.

  Read the article

• i need to install server2003 x64 on my computer dell 1525

  - by omar

  when i install windows server2003 x64 i recieved this message "attempting to load an x64 operating system , however this CPU is not compatible with x64 mode . so please i need to solve this problem on my laptop dell 1525

  Read the article

• Broken Motherboard Trace

  - by CoffeeBean

  When you're fairly certain that a motherboard trace is broken near the CPU (i.e.: you suspect heatsink / fan was improperly inserted) is it advisable to attempt a repair? I've heard that it can be done using a substance for repairing embedded windshield defoggers. Has anyone had any experience with this?

  Read the article

• Why don't monitors have more pixels per inch?

  - by ULTRA_POROV

  72 ppi is nothing. And we have been stuck with this for 20 years. Why do we need to resort to stupid tech like anti-aliasing instead of resolving the core of the issue, more pixels per inch!!! It is really surprising considering all the progress cpu's, video cards, etc. have made.

  Read the article

• Streaming audio/video in a publicly-hosted server increases bandwith usage

  - by Eka

  I have a website hosted in a public server (withoud any streaming content) ,using public hosting instead of private because its cheaper. But in public hosting their are limitations when compared to private hosting such as monthly bandwidth usage (1 GB), disk space, cpu usage etc. I am planning to embedd videos and audios (from other websites like youtube) to my already existing website. My question is if a client streams a embedded video/audio (hosted in another website) from my website any change in bandwidth occurs.

  Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >