Search Results

Search found 3994 results on 160 pages for 'dual wan'.

Page 107/160 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

• Router slowing my connection?

  - by Roberto

  I have a Linksys WRT54G and I pay for a 12Mbps connection. I've been testing my connection using speedtest.net for many days and always get 8Mbps. I called the support and they told me to bypass the router and test. I did it and got 16Mbps (much more than I pay for), so I thought "this guy just changed my speed so can he blame my router", and he blamed it. But to my surprise, everytime I bypass the router I get 16Mbps and when I use the router I get 8Mbps. Is this guy trolling me somehow (configuring the VOIP-modem-stuff to different profiles depending o the MAC address connecting to it) or is my router a POS? How can I find out? I don't know what's the thing the router connects to, it's a kind of VOIP adapter; the link is this one, but unfortunately I don't think you'll understand because it's in Portuguese. I know they can remotely connect to it, that's the origin of my conspiracy theory :) I just tested wired to the router and got 10Mbps (and still 8Mbps on wifi and 16Mbps without router) O_o I'm 5cm away from my router, so no obstacles to interfere, right? ------ UPDATE ------- It's a WRT54G V8, I'm using firmware v8.00.7 (will install 8.00.8 tomorrow, but I saw that it's only a minor fix to UPnP denial of service security vulnerability). Results: IPerf LAN-LAN: 80Mbps IPerf LAN-WLAN: 19Mbps (therefore we can ignore wireless issues/settings) I wasn't able to make the (W)LAN-WAN NAT-enabled test with IPerf, I get a connection refused error. I'm not sure if did it right: ran in server mode, configured router to forward that port to my IP and tried to connect to my internet IP that got from this site. I don't think there is a way to disable NAT using this firmware. Question: Let's suppose it's an underpowered hardware issue. Is it right to assume that custom firmwares could resolve the issue because they are possibly better implemented and would make better use of the router resources? I couldn't find any references pointing to wired performance improvements with the use of custom firmware.

  Read the article

• How can I calculate power consumption of my PC in Watt?

  - by Jitendra vyas

  How can I calculate power consumption of my PC in Watt, to prove my House owner ( I live on rent) , my PC doesn't consume much power? He blames me for Huge power bills even he too use Fridge, A.C. etc and his son watch the TV all the time. We both share one Power meter so for bill we pay 50%-50% but He is saying I use PC all the time even night i keep on for downloading. I just want to calculate power consumption of my PC then will calculate monthly expense of unit as per my City's per unit price for power. I've Windows: Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Memory (RAM): 960 MB CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1399.0 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Monitors: 1 - 17inch LCD - LG Screen Resolution: 1280 X 768 - 32 bit Network: Network Present Network Adapters: Bluetooth Device (Personal Area Network) #2 | WAN (PPP/SLIP) Interface CD / DVD Drives: I: ELBY CLONEDRIVE COM Ports: COM1 | COM2 | COM7 | COM8 | COM9 | COM10 LPT Ports: LPT1 Mouse: 3 Button Wheel Mouse Present Hard Disks: C: 29.3GB | D: 29.3GB | E: 97.7GB | F: 97.7GB | G: 211.9GB USB Controllers: 5 host controllers. Firewire (1394): 1 host controllers. Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA #2

  Read the article

• Which linux distro for a laptop in windows environmet?

  - by Dev er dev

  I just got new laptop at work. What would you recommend as a linux distribution for it? All other developers are working under windows, and use windows tools. I'm currently using ArchLinux, but want to change it. I don't want to waste time configuring wireless, windows network shares, network pritners, projector, etc ... I want this stuff to just work, while still having sane and stable development evironment and tools. Is Ubuntu a good choice for this? I use gentoo at home, but don't think it is a good match for work environmet. EDIT: Note that we are working on cross platform apps, and deployment platform is almost always linux. There are very few windows apps that I have to use (like MS Project). It is just that everything else is windows centric. I use linux because I feel more productive with it, even if I have to dual boot to edit MS Project files.

  Read the article

• Snow Leopard Compatible Drivers for Moschip MCS7720 USB-to-Serial Controller

  - by Kristopher Johnson

  We are using Cables Unlimited USB-2925 USB-to-Dual-DB9 serial cables, which use the Moschip MCS7720 controller. We have downloaded the newest driver from http://www.moschip.com/mcs7720.php, but that driver was last updated in 2005. It does not seem to be working with Macs running OS X 10.6 Snow Leopard. We have sent emails to the support addresses for both Cables Unlimited and Moschip. Cables Unlimited says they are checking with Moschip. No responses from Moschip yet. Does anyone know of any updates for this driver, or are there any ways to get the driver to work with Snow Leopard?

  Read the article

• Dedicated NIC or dedicated port for iSCSI?

  - by Newt

  When spec'ing and configuring a machine that will utilise shared iSCSI storage, I've read a lot of documentation which suggests a dedicated network adapter should be used for iSCSI communication. That makes a lot of sense and I have no problem with it. The question I do have, is this - should that suggestion be taken to mean that a separate physical NIC should be used, or will a dedicated port/ports on a dual/quad port NIC be just as good? My suspicion is that simply using dedicated port(s) on a shared NIC would be just as good. Any input greatly appreciated.

  Read the article

• Synergy setup broke on upgrade

  - by CoatedMoose

  I had synergy setup working fine with version 1.3.7, however I got a new computer and decided to set it up as well. Because the setup I was working with was ubuntu (server - dual monitors) mac (client) and the new computer (replacing the mac) was windows, I ended up updating everything to 1.4.10. ______ ______ ______ | mac | ubu1 | ubu2 | |______|______|______| The problem is currently that dragging to the left of ubu1 causes the cursor on the mac to flicker briefly and then the cursor shows up at the bottom right corner of ubu2. Here is my .synergy.conf section: screens Andrews-Mac-Mini: ctrl = ctrl alt = meta super = alt Andrew-Ubuntu: end section: links Andrew-Ubuntu: left = Andrews-Mac-Mini Andrews-Mac-Mini: right = Andrew-Ubuntu end And the output from synergys -f NOTE: client "Andrews-Mac-Mini" has connected INFO: switch from "Andrew-Ubuntu" to "Andrews-Mac-Mini" at 1679,451 INFO: leaving screen INFO: screen "Andrew-Ubuntu" updated clipboard 0 INFO: screen "Andrew-Ubuntu" updated clipboard 1 INFO: switch from "Andrews-Mac-Mini" to "Andrew-Ubuntu" at 2398,833 INFO: entering screen

  Read the article

• explorer.exe eating all CPU, how to to detect culprit?

  - by JohnDoe

  Windows 7 64bit. I am using ProcessExplorer from Sysinternals, and it says, that the offending call is ntdll.dll!RtlValidateHeap+0x170 however, the call stack towards the entry is always different, so it's hard for me to track the problem. Maybe it's a mal-programed trojan, causing exceptions in Explorer.exe, but that is only a wild speculation. Explorer.exe is then consuming 25% (a core on a dual core). Killing the process makes the task bar go away, respawning from task manager, and half a minute later it's again eating all CPU cycles.

  Read the article

• Windows XP SP3 client over NAT to a Windows 2008 R2 SP1 file server disconnection

  - by Patrick Pellegrino

  we just transferred a pilot group from our old(!!) Netware infrastructure to an Microsoft infrastructure. Since then, our users got problems accessing their files. They all experience disconnection from the mapped drives. The file server is access via a WAN connection by a firewall (Sonicwall) between both network and we do NAT. All clients have Windows XP SP3 and the file server is an Windows 2008 R2 SP1. On the file server I got many Event Id 2012. Many post over the Internet suggested a problem between the SMB protocol and NAT. We need a short term fix to continue to transfer users from Netware to Microsoft after what will work to remove the NATing. I found this MS KB http://support.microsoft.com/kb/2444558 that suggested a kind of workaround for Windows 7 clients but I can found anything for Windows XP. Anyone can help me with this ? We don't want to stop the project and do a network job before migrating. Regards. Update: Our few Windows 7 computers doesn't seem to have this issue.

  Read the article

• How to configure a Router (TL-WR1043ND) to work in WDS mode?

  - by LanceBaynes

  I have a WRT160NL router (192.168.1.0/24 - OpenWrt 10.04) as AP. It's: - WAN port: connected to the ISP - WLAN: working as an AP, using 64 bit WEP/SSID: "MYWORKINGSSID", channel 5, using password: "MYPASSWORDHERE" - It's IP Address is: 192.168.1.1 Ok! It's working great! But: I have a TL-WR1043ND router that I want to configure as a "WDS". (My purpose is to extend the wireless range of the original WRT160NL.) Here is how I configure the TL-WR1043ND: 1) I enable WDS bridging. 2) In the "Survey" I select my already working network. 3) I set up the encryption (exact same like the already working one) 4) I choose channel 5 5) I type the SSID 6) I disable the DHCP server on it. After I reboot the router and connect to this router (TL-WR1043ND) over wireless I'm trying to ping google.com. From the ping I see that I can reach this router, that's ok, but it seems like that this router can't connect to the original one, the WRT160NL (so I don't get ping reply from Google). The encryption settings/password is good I checked it many-many-many times. what could be the problem? I'm thinking it could be a routing problem, but what should I add to the "Static Routing" menu? I tried to change the IP address of the TL-WR1043ND to: 192.168.1.2 So if this a routing issue then I should add a static routing rule that says: If destination: any then forward the packet to 192.168.1.1 p.s.: I updated the Firmware to the latest version. It's still the same. p.s.2: The HW version of the TL-WR1043ND is 1.8 p.s.3: Could that be the problem that I use different routers? (If I would buy.. another TL-WR1043ND and use it instead of the WRT160NL, and with normal Firmware, not OpenWrt, then it would work?? The "WDS" is different on different routers?) p.s.4: I will try to check the router logs@night - and paste it here! :\

  Read the article

• 3 monitors windows xp

  - by c0mrade

  I have a laptop mounted to a dock. When I try to use 2 monitors using dualview everything works fine I get my image across 2 monitors, but when I connect the third one I can't use it although its recognized. Here's what I'd like to do, I'd like to get dual view from my laptop across two monitors, and I have a remote machine connecting to it via remote desktop. I'd like to have that displayed on the third monitor. Is that possible? or some other combination?

  Read the article

• Multiple public IPs through DD-WRT without 1-to-1 NAT

  - by Stephen Touset

  I've done a search here and wasn't able to find anything relevant to my situation. I apologize in advance if I've missed an existing post on the topic. Our ISP has provided us with 6 static IP addresses. We are currently using two of them (plus one for the Comcast-provided router). One of the static addresses routes to our internal network, and the other goes to our VOIP phone system. Unfortunately, the Comcast machine doesn't support QoS, so our VOIP calls have been choppy. We plan to put the Comcast-provided router into bridge mode and replace it with an ASUS RT-N16 running DD-WRT. However, I'm unsure how to set up DD-WRT to function similarly to our existing Comcast router. The Comcast router's WAN IP is the first of our static IP addresses. We did not need to provide an internal LAN IP address — simply connecting machines that use our other public addresses to the LAN ports on the Comcast router is enough for it to route between the connected machines and our internet connection. Is there a way to do a similar setup through the DD-WRT? Thanks in advance.

  Read the article

• Linux Ubuntu: Updating the GRUB menu

  - by Mr X

  So apparently there are 2 versions of Linux on my laptop(I have a dual boot system with Linux and Windows 8 but Linux is the master OS). One of them uses the Kernel version 3.11.0 whose headers + source code are incompatible with my wireless driver. My laptop is a Toshiba Satellite with a Realtek RTL8188CE wireless lan.So the newer kernel version is still the first option on the menu and to get to Linux I use the "Previous versions of linux" which is running Kernel version 3.2.0-55. What can I do to update the grub menu so that Linux version with the 3.2.0-55 Kernel appears as the primary option? Do I need to get rid of/uninstall the newer kernel version? How can I do this without screwing up Linux entirely?

  Read the article

• Passing OpenVPN road-warrior traffic through tunnel pfsense

  - by Chris

  I have a local LAN (10.100.100.0/24) and OpenVPN road-warriors (10.99.99.0/24). pfSense is regulating all this as follows: LAN: 10.100.100.105 WAN: 10.100.99.1 (connected to DSL Router which connects to internet). OPT1: 10.99.99.0 (OpenVPN tun0). There is an IPSec connection between my office and another office where my LAN can work on a specific IP address (sql server to be exact) on 192.168.30.41. My problem is that I wish my OpenVPN road-warrior clients to be able to use the IPSec service on 192.168.30.41 as well (which at present they cannot despite the fact that I am pushing the route 192.168.30.0 255.255.255.0). The other site's administrator cannot add the extra route for my openvpn clients for a lot of reasons which I am not going to enter at this stage. Is there a possibility that I could NAT all of my openVPN road-warriors requests through a local LAN IP address (something like 10.100.100.250 which is not used by anything on my LAN). The problem is that I am a newbie with pfSense so as much step-by-step help as possible would be very much appreciated! Thank you. C.

  Read the article

• Using VLANs/subnetting to separate management from services?

  - by YouAreTheHat

  Background: I recently purchased a server and a managed switch for my home in the hopes of getting more experience and some fun toys to play with. The devices and appliances I either have or plan to have cover a broad spectrum: router, DD-WRT AP, Dell switch, OpenLDAP server, FreeRADIUS server, OpenVPN gateway, home PCs, gaming consoles, etc. I intend to segment my network with VLANs and associated subnets (e.g., VID10 is populated by devices on 192.168.10.0/24). The idea is to secure the more sensitive appliances by forcing traffic through my router/FW. Setup: After thinking and planning for some time, I have tentatively decided on 4 VLANs: one for the WAN connection, one for servers, one for home/personal devices, and one for management. In theory, the home VLAN will have limited access to the servers, and the management VLAN will be totally isolated for security. Question: Since I want to restrict access to management interfaces, but some appliances have to be accessible to other devices, is it possible/wise to have only management (SSH, HTTP, RDP) available on one VLAN/IP and only services (LDAP, DHCP, RADIUS, VPN) available on other? Is this a thing that is done? Does it gain me the security I think it does, or hurt me in some way?

  Read the article

• Apache hanging with MaxClients is reached

  - by Ash White

  My Apache 2.2 (preform MPM) is hanging when MaxClients is reached, rather than queueing up requests and serving them when child processes become free. When this happens, the web server is totally unresponsive until it is manually restarted. The server stack is Ubuntu 8, MySQL 5, PHP 5. Hardware is Dual Xeons (2.8) with 2GB of RAM. It serves 30,000 - 50,000 pageviews per day. Static images, CSS, and JS are offloaded to a separate server and PHP is cached using eAccelerator. The HTML output of many pages is cached to the filesystem. Relevant Apache directives: KeepAlive On MaxKeepAliveRequests 50 KeepAliveTimeout 2 StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 2000

  Read the article

• Ext3 partition doesn't mount on Snow Leopard using MacFUSE

  - by Fez

  I'm dual-booting OS X and Ubuntu on a Macbook 4,1. I'm trying to mount my Linux partition in OS X. I installed MacFUSE 2.0.3,2 and fuse-ext2-0.0.7 on Snow Leopard 10.6.5. I created the directory /Volumes/Ubuntu and tried to mount the disk there using the command: fuse-ext2 /dev/disk0s4 /Volumes/Ubuntu/ This is the output I get: fuse-ext2: version:'0.0.7', fuse_version:'27' [main (../../fuse-ext2/fuse-ext2.c:324)] fuse-ext2: enter [do_probe (../../fuse-ext2/do_probe.c:30)] fuse-ext2: Error while trying to open /dev/disk0s4 (rc=13) [do_probe (../../fuse-ext2/do_probe.c:34)] fuse-ext2: Probe failed [main (../../fuse-ext2/fuse-ext2.c:340)] Any clue what's going wrong? Thanks!

  Read the article

• Apache mod_rewrite weird behavior in Internet Explorer

  - by morrty

  I'm attempting to setup redirection for a couple of root domains. Firstly, here is the code in my httpd-vhosts.conf file: <VirtualHost *:80> ServerAdmin ****@example.com ServerName example.com ServerAlias example2.com RewriteEngine On RewriteCond %{HTTP_HOST} !^192\.168\.0\.1$ # This is our WAN IP RewriteCond %{HTTP_HOST} !^www\. [NC] RewriteCond %{HTTP_HOST} !^$ RewriteRule ^/?(.*) http://www.%{HTTP_HOST}/$1 [L,R,NE] </VirtualHost> What this does is redirect the root domain of example.com or example2.com or any host other than www to www.example(2).com The part I'm having a problem with is the RewriteRule itself. the $1 is supposed to match the pattern of the RewriteRule and add it in the substitution. For example: "http://example.com/test.html" should rewrite to "http://www.example.com/test.html" It works in all modern browsers like it's supposed to except for IE8 or IE9 (I didn't test other IE versions). In IE, this works: "http://example.com" to "http://www.example.com" In IE, this does not work: "http://example.com/test.html" to "http://www.example.com/test.html" Does anyone have an explanation for this behavior? I hope I've explained it well enough. Thank you.

  Read the article

• Recover OffScreen Window in Windows 8

  - by Jason McD

  Someone asked a very similar question in regards to window recovery for windows xp: Similar Recovery I'm using windows 8 (or 8.1 now). I run Dual Monitors. On Monitor 2 I sometimes have the input switched to something else other than the windows display (Mac or PS3). If there was a program that was displaying on Window #2 that does not have 'move' where I could potentially alt-space-m arrow keys. Is there another way to get that program to display on Window #1? I tried right click on the program and doesn't seem to be anything there. I tried Windows Key and Arrows. I Tried right click toolbar and cascade. I'm hoping this is a DUP or Softball question because this annoys the crap out of me. Thanks!!

  Read the article

• Installing Windows Server 2003 on AMD environment

  - by santhosh kumar

  Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

  Read the article

• Ping: sendmsg: operation not permitted error after installing iptables on Arch GNU/Linux

  - by estol

  Yesterday I got a new computer as my homeserver, a HP Proliant Microserver. Installed Arch Linux on it, with kernel version 3.2.12. After installing iptables (1.4.12.2 - the current version afaik) and changing the net.ipv4.ip_forward key to 1, and enabling forwarding in the iptables configuration file (and rebooting), the system cannot use any of its network itnerfaces. Ping fails with Ping: sendmsg: operation not permitted If I remove iptables completely, networking is okay, but I need to share the Internet connection to the local network. eth0 - wan NIC integrated on the motherboard (no idea of vendor, probably HP). eth1 - lan NIC in a pci-express slot (Intel Gigabit CT Desktop http://www.intel.com/content/www/us/en/network-adapters/gigabit-network-adapters/gigabit-ct-desktop-adapter.html) Since it works without iptables(server can access the internet, and I can login with ssh from the internal network), I assume it has something to do with iptables. I do not have much experience with iptables, so I used these as reference (separate from each other of course...): wiki.archlinux.org/index.php/Simple_stateful_firewall#Setting_up_a_NAT_gateway revsys.com/writings/quicktips/nat.html howtoforge.com/nat_iptables On my previous server, I used the revsys guide to set up nat, worked like a charm. Anyone experienced anything like this before? What am I doing wrong? Thanks, estol

  Read the article

• Unable to login to arch linux

  - by Ayodhya

  I am new to archlinux. I am using live usb for archlinux. When I booted it said not a COM32R image. I explored on Google, used Tab and choose have64 and then it booted. Now I am not able to login I used password root but it's not accepting. I also used startx but nothing happened. I am using archlinux-2014.06.01-dual iso downloaded from archlinux website. I see the the following Arch Linux Menu after boot-up Boot Arch Linux (x86_64)(NBD) Boot Arch Linux (x86_64)(NFS) Boot Arch Linux (x86_64)(HTTP) Boot Arch Linux (i686)(NBD) Boot Arch Linux (i686)(NFS) Boot Arch Linux (i686)(HTTP) Boot Existing OS I Choose First one and fourth one (NBD) for live boot and i am having the problem mentioned above.

  Read the article

• IP tables gateway

  - by WojonsTech

  I am trying to make an iptables gateway. I ordered 3 dedicated server from my hosting company all with dual nics. One server has been given all the ip addresses and is connected directly to the internet and has its other nic connected to a switch where the other servers are all connected also. I want to setup iptables so for example the ip address 50.0.2.4 comes into my gateway server it fowards all the traffic to a private ip address using the second nic. This way the second nic can do what ever it needs and can respond back also. I also want it setup that if any of the other servers needs to download anything over the inernet it is able to do so and by using the same ip address that is used for its incomming traffic. Lastly I would like to be able to setup dns and other needed networking stuff that i maybe not thinking about.

  Read the article

• Screen broken of mi laptop, start with an external monitor

  - by Widrogo

  hi now I have a big problem my brother broken the screen of mi laptop, now the replacement of my screen arrives in three weeks, now I can not lose three weeks because my homework be in my memory, now I need start the laptop with external monitor, I want to know if there is a way to boot from the boot my laptop because I have dual boot and password I can not access my laptop with an external monitor for this reason. Now there is a way to start my laptop directly to an external monitor. I look for a solution, I need to remove my broken laptop screen and automatically will recognize the vga monitor but did not work me now i look for a solution and find that i need

  Read the article

• Can I drive two external screens from an 'Alu' iMac?

  - by robsoft

  I've got a 24" 2.4 Ghz Core 2 Duo iMac. It's about 18 months old, though I can't specifically remember when I bought it. It has a Displayport Mini-DVI socket on the back, and currently I have that linked to a DVI adaptor driving a Philips 20" widescreen monitor in portrait mode (awesome for browsing). I have another, identical Philips monitor and wondered if there was a way of connecting that to the iMac too. Is there such a thing as a DisplayPort Mini-DVI to dual-DVIs adaptor? Can this iMac's graphics card even drive such a set-up? The graphics chipset in the iMac is reported as ATI Radeon HS2600, 256 MB. The main iMac display is 1920x1200 and the Philips display is 1050x1680 (@60Hz, rotated 90 degrees). The third screen would be another 1050x1680 and ideally I'd have it portrait again, too. EDIT: Please let this question stand - it's not a dupe. The current Mac laptops use 'Mini Displayport' connectors, which are not the same as DisplayPort Mini-DVI connectors.

  Read the article

• ESXi and Networking Devices

  - by EsxiUser

  I have two intel pro 1000 pt nics. One quad and one dual port. I want to assign all nic ports to a VM. I enabled PCI passthrough on all devices but ESXi will only allow me to add two nic ports until it tells me the maximum number of pci devices have been added. I have also tried setting up a virtual switch but it didn't seem like this would give full access to the nics. What is the best way to setup the nics to the VM has direct access to them? This is for a firewall VM.

  Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >