Search Results

Search found 5521 results on 221 pages for 'replacement parts'.

Page 107/221 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

• Tiny linux box with 2xGbLAN, WLAN and 10MB/s AES throughput?

  - by Nakedible

  I'd like to find a small linux box with the following specifications: Small (mini-ITX size is OK) Fanless Runs Debian At least two gigabit network interfaces WLAN that supports "host ap" with hostapd + mac80211 in AP mode Can encrypt AES at least 10 megabytes per second Total cost $300 or less Solutions from multiple parts also accepted - I can buy an external network card etc. and build the box myself if the components are available. If you don't know about the "host ap" thing, just suggest your solution, I'll find out if I can get that resolved. If I can't get all that, I can possibly skip the "runs Debian" part, and I can definitely skip the hostapd part if the box can be a wireless access point with multiple ESSIDs out of the box. Something like Asus RT-N16 is close - doesn't run Debian easily, and probably doesn't encrypt AES fast enough. Something like Zotac ZBOX HD-ID11 is also close - no idea which WLAN card it has and it lacks second gigabit interface, but otherwise nice.

  Read the article

• What to do with a broken OS X install disc?

  - by slhck

  First things first: I don't appreciate software piracy and I really want to spend money on software that I use and that I work and make money with. I don't want this question closed just because I consider downloading software, I only want honest opinions and alternatives. Here we go: So I have my OS X Snow Leopard Upgrade DVD, but it's horribly scratched and won't boot anymore. It endlessly loads and at some point I have to force pull it out of the disc slot. How can I reset my Mac then? Can I take my original disk to an Apple Store and ask them for a replacement? Will they believe me, even if I don't have the receipt anymore? Would owning the original disk make it okay for me to look somewhere on the internet and download it? I don't even know if that will work without hassles. Could I try to read the disk to an image with some error correction methods? Maybe during boot it can't read some files, but some other program can? Is there any other way of resetting the Mac? Mine's now over 3 years old an I seem to have misplaced my original discs that had 10.4 on it. Or should I just buy a new 10.6 upgrade disk? (Which is not really what I want to do) Answers and opinions would be much appreciated.

  Read the article

• Drobo-like linux file server - how do I do it?

  - by John Hunt

  I've been pondering for a long time about how I can set up a server which operates much like the Drobo storage thing. The reasons I don't actually want a drobo is because I've heard scare stories, plus I'd like to do this on the cheap. So ideally I'm looking for something like lvm so I can create a logical volume that spans many hard disks of varying sizes... obviously that only offers redundancy if I put the LV on a raid array (as far as I know..) I have however been reading about technologies such as Microsoft's drive extender which duplicates files at the filesystem level and makes sure that the mirrored files are on a different phyiscal disk.. does anyone know or recommend a filesystem or method like this as it'll hopefully make much better use of the space available than raid ever could. Performance isn't an issue, I'd just really like to make the most of the hard disks I have lying around whilst having a bit of redundancy incase a disk dies. I understand full well that this is no replacement for a backup, but I'll only be storing files of medium importance and using the nas itself as a backup of my main pc and other systems. Thanks in advance! I'm hoping zfs or btrfs or something can do something clever for me :)

  Read the article

• Looking for "bitmap-vector" image editor

  - by Borek

  I used to use PhotoImpact which is no longer developed so I'm looking for a replacement. What made PhotoImpact great to me was the ability to work in both bitmap and vector modes. What I mean by that: I could have an image or screenshot and easily add arrows, text captions or shapes to it. These shapes were vector objects so I could come back to them later and amend their properties easily. Software I know of: Paint.NET is purely bitmap so please don't recommend it - layers are not enough for my needs Drawing tools in MS Office work pretty much the way I'd like - you can paste an image and then add vector objects on top of it. It just doesn't feel right to have the full-fidelity original images stored as .docx or .pptx (I don't fully trust Word/Powerpoint that they don't compress the image) I'm not sure about GIMP but if it's just "better Paint.NET" (i.e., layers but no vector objects) I'm not interested Photoshop is out of question purely because of its price tag Corel killed PhotoImpact because they already had a competing product (Paint Shop Pro) but AFAIK it lacks vector features. Any tips for PhotoImpact alternatives would be very welcome.

  Read the article

• Why doesn't Linode ever have to shut down for updates?

  - by Tom Marthenal

  I've been using Linode for over a year now, and, unlike some lesser-known VPS hosts I've used, I've never been required to shut down my VPS by Linode. The only restarts have been ones I've initiated. How do they go for years on end without requiring restarts and with no downtime? Isn't downtime inevitable when upgrading some parts of the host system? Do they simply perform as few updates as possible? This isn't meant to be a Linode-specific question; I am only using them as an example because I have experience with them.

  Read the article

• Policy-based template design: How to access certain policies of the class?

  - by dehmann

  I have a class that uses several policies that are templated. It is called Dish in the following example. I store many of these Dishes in a vector (using a pointer to simple base class), but then I'd like to extract and use them. But I don't know their exact types. Here is the code; it's a bit long, but really simple: #include <iostream> #include <vector> struct DishBase { int id; DishBase(int i) : id(i) {} }; std::ostream& operator<<(std::ostream& out, const DishBase& d) { out << d.id; return out; } // Policy-based class: template<class Appetizer, class Main, class Dessert> class Dish : public DishBase { Appetizer appetizer_; Main main_; Dessert dessert_; public: Dish(int id) : DishBase(id) {} const Appetizer& get_appetizer() { return appetizer_; } const Main& get_main() { return main_; } const Dessert& get_dessert() { return dessert_; } }; struct Storage { typedef DishBase* value_type; typedef std::vector<value_type> Container; typedef Container::const_iterator const_iterator; Container container; Storage() { container.push_back(new Dish<int,double,float>(0)); container.push_back(new Dish<double,int,double>(1)); container.push_back(new Dish<int,int,int>(2)); } ~Storage() { // delete objects } const_iterator begin() { return container.begin(); } const_iterator end() { return container.end(); } }; int main() { Storage s; for(Storage::const_iterator it = s.begin(); it != s.end(); ++it){ std::cout << **it << std::endl; std::cout << "Dessert: " << *it->get_dessert() << std::endl; // ?? } return 0; } The tricky part is here, in the main() function: std::cout << "Dessert: " << *it->get_dessert() << std::endl; // ?? How can I access the dessert? I don't even know the Dessert type (it is templated), let alone the complete type of the object that I'm getting from the storage. This is just a toy example, but I think my code reduces to this. I'd just like to pass those Dish classes around, and different parts of the code will access different parts of it (in the example: its appetizer, main dish, or dessert).

  Read the article

• Can't Connect w/ SQL Management Studio After Domain Change

  - by Sam

  Our old Small Business Server 2003 (acting as our domain controller) was on the fritz, so we replaced it with a new Windows Server 2008 box and set the server up as our new domain controller. In hindsight, it may have been a mistake, but we set up the new server as a replacement and tried to keep as much the same as possible, including the DOMAIN name. The problem was, that even though the domain name was the same, the guest computers somehow still realized it was not the exact same domain. We had to unjoin and rejoin the domain and port over everyone's documents and settings. This morning, when I attempted to connect to my local SQL Server Instance, it was saying that my login failed. When I tried to use the SQL Management Studio, it throws the error "Package 'Microsoft SQL Management Studio Package' failed to load" on startup, then exits without giving me a chance to change the login. I am using Mixed Authentication and have an administrative account as a backup. Ideas? If there is a more appropriate stack, please let me know where to put it.

  Read the article

• Recover data from physically damaged harddrive. What are my options?

  - by Michael Kniskern

  I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a physically damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are. Update I took the HD to Data Doctors, and they told me that the SATA connection was broken to they would need to replaced the data connector and then copy the data to a brand new hard drive. So, with the initial analysis, cost of replacement parts, and data recovery fee it came out to $865.00 USD. The technician specifically stated if this was an older hard drive that would just need to replace the data connector. But because there is specific information related to the individual hard drive in the flash ROM, they need to transfer the data to a brand new hard drive.

  Read the article

• PNG alpha rendered as black in Blender

  - by Camilo Martin

  I'm a Blender novice, so this is probably easy to fix. When I use a transparent PNG as a texture in Blender, the parts that should be transparent are rendered as black. This is especially confusing since in the material preview it looks as if the material would indeed be transparent. Here's a screenshot: This is the test texture, and in the right on top of a checkerboard:                        Here is the .blend file in case you want to check it:                                                      

  Read the article

• Is my laptop battery dead?

  - by Josh

  Recently my laptop battery will get extremely hot (definitely hotter than it should get) when I charge it. After that I usually end up removing it once it's fully charged to let it cool down, which takes a couple hours... Question is, is my battery dead? My last battery I had that died just ended up lasting 2 - 3 minutes on battery, no weird heat issues. And is there any way to possibly fix this? Probably not but I won't be able to get a replacement anytime soon. UPDATE: A few days ago when this happened and it cooled down, assuming it was fully charged, I ran my laptop on battery, and the battery life lasted about 10 minutes and then the laptop shutdown. I then plugged it in later and charged it back up, and for a while I had a orange light blinking on my laptop - which I assumed meant the battery was dead, especially since I got 10 minutes battery life. Then today, I turned my laptop on and was surprised to see that the battery was at 20% and charging (it's been plugged in since the incident above, so it should have been fully charged when I shut it off) I let it charge up, and as usual it got pretty hot around the time it was fully charged. So I turned my laptop off and pulled the battery out to let it cool down Now the thing is, just now I tried running it on battery, and it's been going for an hour now... so maybe its not dead? (also the orange light is no longer blinking...) Thanks in advance if anyone knows whats going on, and how to fix it, if its fixable =] EDIT: Some info if it helps... my laptop is about 2 years ago, and it's an Asus K50ID. I know laptop batteries usually don't last more than a year but I'm trying to keep this one going for as long as I can.

  Read the article

• USB cable model for Kodak EasyShare Z740

  - by Robert Munteanu

  I've lost the original USB cable for my Kodak EasyShare Z740, and I can't figure out which model I should replace it with. I did not find the original parts, as the camera is pretty old. I did find the cable on the Kodak site, but I I've tried both mini-USB and micro-USB and neither fit. Alternatively, bonus points for pointing out a dealer in Bucharest, Romania which has the original part. N.B. I do use a card reader now, but I find it more convenient to use the cable.

  Read the article

• Ultra-lightweight web browser?

  - by zildjohn01

  Are there any good super-lightweight graphical web browsers out there? I'd like to be able to browse the web on an old PC, but the mainstream crop of browsers is just too heavy, and I don't want to resort to something like Lynx. There must be something decent out there that'll fit in 16 or 32MB of RAM comfortably. 100% standards compliance isn't necessary, but I'd like something that supports the most widely used parts of CSS and JavaScript. The goal is to get 98% of sites usable in a nice, graphical format.

  Read the article

• DSP - Filtering in the frequency domain via FFT

  - by Trap

  I've been playing around a little with the Exocortex implementation of the FFT, but I'm having some problems. Whenever I modify the amplitudes of the frequency bins before calling the iFFT the resulting signal contains some clicks and pops, especially when low frequencies are present in the signal (like drums or basses). However, this does not happen if I attenuate all the bins by the same factor. Let me put an example of the output buffer of a 4-sample FFT: // Bin 0 (DC) FFTOut[0] = 0.0000610351563 FFTOut[1] = 0.0 // Bin 1 FFTOut[2] = 0.000331878662 FFTOut[3] = 0.000629425049 // Bin 2 FFTOut[4] = -0.0000381469727 FFTOut[5] = 0.0 // Bin 3, this is the first and only negative frequency bin. FFTOut[6] = 0.000331878662 FFTOut[7] = -0.000629425049 The output is composed of pairs of floats, each representing the real and imaginay parts of a single bin. So, bin 0 (array indexes 0, 1) would represent the real and imaginary parts of the DC frequency. As you can see, bins 1 and 3 both have the same values, (except for the sign of the Im part), so I guess bin 3 is the first negative frequency, and finally indexes (4, 5) would be the last positive frequency bin. Then to attenuate the frequency bin 1 this is what I do: // Attenuate the 'positive' bin FFTOut[2] *= 0.5; FFTOut[3] *= 0.5; // Attenuate its corresponding negative bin. FFTOut[6] *= 0.5; FFTOut[7] *= 0.5; For the actual tests I'm using a 1024-length FFT and I always provide all the samples so no 0-padding is needed. // Attenuate var halfSize = fftWindowLength / 2; float leftFreq = 0f; float rightFreq = 22050f; for( var c = 1; c < halfSize; c++ ) { var freq = c * (44100d / halfSize); // Calc. positive and negative frequency indexes. var k = c * 2; var nk = (fftWindowLength - c) * 2; // This kind of attenuation corresponds to a high-pass filter. // The attenuation at the transition band is linearly applied, could // this be the cause of the distortion of low frequencies? var attn = (freq < leftFreq) ? 0 : (freq < rightFreq) ? ((freq - leftFreq) / (rightFreq - leftFreq)) : 1; // Attenuate positive and negative bins. mFFTOut[ k ] *= (float)attn; mFFTOut[ k + 1 ] *= (float)attn; mFFTOut[ nk ] *= (float)attn; mFFTOut[ nk + 1 ] *= (float)attn; } Obviously I'm doing something wrong but can't figure out what. I don't want to use the FFT output as a means to generate a set of FIR coefficients since I'm trying to implement a very basic dynamic equalizer. What's the correct way to filter in the frequency domain? what I'm missing? Thanks in advance.

  Read the article

• how to change some of the numbers in word to be arabic numbers without changing a global setting in windows?

  - by Karim

  i have a word document. it have 2 parts one english and one arabic. the problem is that all the numbers are english numbers [0123456789] but i want the arabic part's numbers to be arabic numbers [??????????] how can i do that in word 2007 or 2010? thanks Edit: since i didnt receive any response to the question i created a software that converts english numbers to arabic and then i use it to convert the numbers in the document. but still wondering if there is a more easy way to do it?

  Read the article

• Substiting a line through PHP in SSH

  - by Asad Moeen

  I've already setup SSH usage in PHP and most of the things work. Now what I want to do is that I'm looking to edit a line in a file and replace it back. It works directly on the server but can't seem to get it working with PHP files. Here is what I'm trying. $new_line1 = 'Line $I want to add - The $I has to go into the file as it is'; $new_line2 = 'Ending $text of the line - $text again goes into file; $query = "Addition to line"; $exec1= 'cd /root; perl -pe "s/.*/' ; $exec2= '/ if $. == 37" Edit.sh > Edited.sh'; $new="$exec1$new_line1$query$new_line2$exec2"; $edit="cd /root/mp; cp Edited.sh Edit.sh"; echo $ssh->exec($new); echo $ssh->exec($edit); Now the thing is that running the perl command directly in SSH works without any errors but when I run this through PHP I get the error: Substitution replacement not terminated at -e line 1. I want to know why would it work this way and not that?

  Read the article

• External monitor image not centered in the screen

  - by kemp

  I'm using Xorg 7.5 on a Radeon HD4870 with the FOSS radeonhd server on my HP 6830s. The laptop has a VGA connector and I attach it to a 37" panasonic plasma TV. It works fine except for a little annoyance: when activated, the TV screen is set to the resolution of 1360x768 (which it reports as being the highest it supports) but all the image is shifted by about 100 pixels to the right. I can't see the leftmost part of the page, and I have a black vertical bar to the right. If I change the resolution to 1024x768 there is no shifting, the image fills the entire screen with no parts hidden, but at this resolution the image is stretched. How can I tune the position on the external monitor so that the image is centered in the screen filling it entirely?

  Read the article

• How do companies know they've been hacked?

  - by Chad

  With the news of Google and others getting hacked, I was wondering how companies find out, detect, and/or know they've been hacked in the first place? Sure, if they find a virus/trojan on user's computers or see a very high access rate to parts of their system that don't usually see much, if any, traffic. But, from what I've see in articles, the attack was pretty 'sophisticated', so I wouldn't imagine the hackers would make it so obvious of their hacking in the first place. Maybe someone can enlighten me on current detection schemes/heuristics. Thanks.

  Read the article

• What program sent which packet to the network [closed]

  - by Erik Johansson

  I would like to have a tcpdump like program that shows which program sent a specific packet, instead of just getting the port number. This is a generic problem I've had on and off sometimes when you have and old tcpdump file lying around you have no way to find what program was sending that data.. The solution in how i can identify which process is making UDP traffic on linux ? is an indication that I can solve this with auditd, dTrace, OProfile or SystemTap, but doesn't show how to do it. I.e. it doesn't show the source port of the program calling bind().. The problem I had was strange UDP packets, and since those ports are so short lived it took me a while to solve this issue. I solved this by running an ugly hack similar to: while true; date +%s.%N;netstat -panut;done So either a method better than this hack, a replacement for tcpdump, or some way to get this info from the kernel so I can patch tcpdump. EDIT: This was asked on superuser "tracking what programs sends to net", no good solution though.

  Read the article

• How do I repair my Logitech Anywhere MX?

  - by Stefano Palazzo

  My Anywhere Mouse has got mushy mouse button syndrome. That is, the left mouse button feels a little bit soft, and it easily double clicks, let's go when I drag something. Before I repair it at home, rather than bringing it to the store (I kind of need it, it's the only one I have), I'd like to know exactly what I'm doing. It'd be too bad if I tried to repair it, voided the warranty and didn't succeed. I'm guessing there are screws to open it under the rubber pads. And I suppose I can take those off without breaking them, and put them back on without bending them. How is this mouse held together, and what's the safest way to open it? Once I have it open, will I be able to fix the problem? What's causing the mushy mouse button? Here's what I know so far: It might be the switch itself that's broken, in which case I shouldn't open it (I can't get a replacement, voiding the warranty to "have a look" seems pointless) If there are screws underneath the rubber pads, they're only on the 'front', the back two thirds of the mouse are all battery cover: There's nothing I can see under the batteries either. In the mouse I had before this one, there were sort of springy things connecting the actual button with the switch soldered to the board. They were just lying inside of a bit of plastic, and I could swap the left and right ones easily. If repairing it is more difficult, transferring the problem to the right mouse button would be a very good start.

  Read the article

• Swapping out a hardware firewall does the mac address get cached?

  - by Dan

  We need to replace a hardware firewall (cisco pix) and have a spare that we will use (temporarily). The firewall sits in front of a couple of web-servers colocated at a data-centre. The replacement will be configured with identical settings (external/internal IP addresses, configured ports etc.). When we swap the firewalls over, will this work immediately or will the old Pix's mac address be cached and the new firewall not be seen until the cache is cleared? (What is it though that is caching the address? Is it just the switch/router that our pix is connected to?) Reason for asking is a few years ago I had a smoothwall firewall in front of a lone server (the external IP of the smoothwall was also the external IP of the web-server). When I replaced the smoothwall with a pix, the IP address of the web-server stayed the same but it now had to be reached via the new firewall on a different IP. It took about 2-4 hours before the rest of the world could see that web-server again. I'm hoping for less downtime this time!

  Read the article

• replacing buffalo lonkstations with FreeNAS, overall backup strategy, am I on the right path?

  - by Shreko

  We've been using 2 Buffalo LinkStations of 320Gb each for shared directory and employee's server storage (around 20 employees). So only documents (word, excel, cad drawings etc.) and database backup of the main application server (ERP, Accounting) 1 buffalo box serves as a main one, located at the server room, next to the main application server and the other buffalo box is located on the opposite side of the building (for fire protection) in a secure storage room and backs up the first one. We also have several external HDs that backs up everything from the buffalo box for an offsite backup. After 3.5 years of using these, capacity is a main limitation, I'm planning a replacement and would like to use FreeNAS (we already use monowall with great success). I would like to keep it simple and continue similar setup, building two low power boxes with 1 hd (2Tb) each. Is low power atom mobo OK? Not sure about HDs? I've read on this site somebody mentioning more seagate ES2 as more reliable and better performing. How would those eco/green drives compare. We've been pretty happy with speed of Buffalo boxes and I don't want my users to notice any slowdown. Any suggestion?

  Read the article

• Is there a point to using theft tracking software like Prey on my laptop, if you have login security?

  - by Reckage

  Hey, so I have a Thinkpad that I use in a variety of places (coffee shops, work, etc.). I don't generally abandon it, but I figure there's a chance I might get careless and it gets stolen at some point. I was thinking of installing something like Prey (http://preyproject.com/), but my OS installs are password secured, and on top of that, I have a fingerprint reader that you need just to get through the BIOS. So: is there actually any benefit to setting up software that tracks the laptop's whereabouts? I imagine that either: The laptop won't boot or login, if the thief doesn't get past the security. If the thief goes around said security somehow, presumably they've split the laptop for parts or bypassed BIOS security, gotten stuck on Windows security and formatted it. Given that it's highly unlikely that the thief would go to the trouble, what's the utility in installing laptop tracking software like Prey?

  Read the article

• Using off-the-shelf hardware for brand-name servers; Possible? Good idea?

  - by threecheeseopera

  Is it possible or advisable to use 'regular' not-sanctioned-by-the-server-manufacturer hardware in high end servers? Often these manufacturer-supplied parts have a very high price markup, and I wonder if it's always necessary (understanding that they probably apply more rigorous requirements to this hardware). For example, Dell sells 300GB 15,000rpm serial-attached scsi drives for a certain server family for almost $600 each, while newegg sells a drive with the same specs for almost half the price http://www.newegg.com/Product/Product.aspx?Item=N82E16822116059. Do we really need to pay these high markups, especially for disks that are likely RAID-ed and so guarded against catastrophic failure?

  Read the article

• Gather Outlook/Exchange connection Status responses from script

  - by mrTomahawk

  I'm trying to figure out a way in-which I can remotely gather Outlook = Exchange Connection stats from systems. I know I can have the users Right-click their Outlook icon in the system notification area, and then choose "Connection Status", but I'd really like to be able to poll this information without having to as the user to do anything. I saw this previous post, and I believe what he did is similar to what I'm trying to do we created a VB application that would pull user PTO information from a backend system and send out status emails to each of the users on a monthly basis but I'm trying to do it to gather the connection information from all my sites for certain parts of the day. Ideally I would like to do this via some sort of VBScript code since that is what I'm most familiar with, but I can work with Powershell too. My environment is all Exchange 2003 and Outlook 2003 clients.

  Read the article

• Header unset Server not working for static files

  - by Sam Lee

  I'm trying to unset the "Server" field in response headers. I do this using Header unset Server, and that works fine for requests handled by mod_perl. However, for requests to /static I use Apache to serve static files. For some reason, when these files are loaded directly in the browser, the Server field is not removed. How can I go about fixing this? Relevent parts of my httpd.conf: LoadModule headers_module modules/mod_headers.so Header unset Server <VirtualHost *:80> <Location /> SetHandler modperl PerlResponseHandler MyHandler </Location> Alias /static/ /home/site/static/ <Location /static> SetHandler None </Location> </VirtualHost>

  Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >