Search Results

Search found 5521 results on 221 pages for 'replacement parts'.

Page 104/221 | < Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >

  • How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

    - by piobyz
    I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

    Read the article

  • How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

    - by piobyz
    I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

    Read the article

  • How to connect 2 routers (Asmax and D-link) RJ11 vs RJ45 issue

    - by piobyz
    I just bought a new router, D-link DSL 2641B and want to connect it to another one, provided by my ISP, Asmax AR 804MP. Previously, I had Linksys WRT350N, and there was no problem, while I had Ethernet cable plugged in to one of LAN ports in Asmax and INTERNET(RJ45) port in Linksys, connection used PPPoE protocol -- worked OK. D-link has DSL(RJ11) port (which I don't want to use as Asmax replacement, while there is a separate Ethernet cable with a TV plugged to Asmax, which I don't want to configure from scratch on D-link). How should I connect my new D-link to work with Asmax? Via DSL port? Via one of the LAN ports (in which case I probably should change the purpose of this port in the config, I guess?). I tried connecting D-link both ways: LAN(ASMAX) to LAN(DLINK) LAN(ASMAX) to DSL(DLINK) (using RJ11 - RJ45 cable) I hope there is some setting in the DLINK's config that I overlooked. I haven't tried to see what's in ASMAX's config, but I guess I don't need to change anything there, while Linksys worked just fine? The only difference I see, is that D-link has RJ11 DSL port as WAN, and Linksys has RJ45 (called by them INTERNET) as a main WAN port.

    Read the article

  • Can Acrobat 11 be made to do OCR using multiple CPU cores?

    - by tarcman.
    OCR processing takes time. Using multiple CPU cores would speed up processing. Acrobat 10 was not a multithreaded application. How about Acrobat 11? Does 11 by default do OCR using multiple CPU cores (if available)? If not, are there any workarounds, e.g. scripting, to help make Acrobat 11 do OCR using multiple CPU cores? Either through Acrobat's built in scripting language or using external scripts that launch and direct multiple single thread instances of Acrobat to in parallell to parts of the processing job. Note: This question is not too localized (not limited to a specific moment in time) because (1) Adobe does not release new major Acrobat versions very often (Acrobat 10 was released two years ago) and (2) Adobe Acrobat is a widely used application.

    Read the article

  • How do I objectively measure an application's load on a server

    - by Joe
    All, I'm not even sure where to begin looking for resources to answer my question, and I realize that speculation about this kind of thing is highly subjective. I need help determining what class of server I should purchase to host a MS Silverlight application with a MSSQL server back-end on a Windows Server 2008 platform. It's an interactive program, so I can't simply generate a list of URLs to test against, and run it with 1000 simultaneous users. What tools are out there to help me determine what kind of load the application will put on a server at varying levels of concurrent users? Would you all suggest separating the SQL server form the web server, to better differentiate the generated load on the different parts of the stack?

    Read the article

  • Body of email breaks distribution list in exchange?

    - by widgisoft
    Hi, I have a very odd problem that I'm not sure is a programming issue or a server issue :-p. Basically I'm sending an email to an exchange distribution list that includes a PHP stack trace; during certain faults the trace includes really high level information such as the machine's environment variables (during file reads, etc.). I went through a copy of the email line by line until the email sent and it appears the line: [SUDO_COMMAND] => /etc/init.d/httpd restart is the culprit. Adding a string replacement in before the email is sent allows a successful send. What I don't understand is WHY these stream of characters are causing the issue ONLY on the distribution email. If I send the email to myself as well, i.e. "[email protected]; [email protected]", then I get the email fine. Re-ordering the list doesn't make a difference the group never gets the email. Because the individual gets the email and not the group I'm assuming the fault is with exchange and some rogue filtering - I've gone through it with the sysadmins and there's no filtering of any sort on that group... so maybe it's a bug? I can't find anyone else having recorded this specific fault so I figured I'd open it here. For now I'm just not using the distribution list but it'd be nice to eventually find the solution. Many thanks, Chris

    Read the article

  • SSH client and Command Prompt replacements Windows look-and-feel

    - by Oddthinking
    The Problem I've worked exclusively in Windows. I can handle that. I've worked exclusively in DOS (a long time ago!). I can handle that. I've worked exclusively in Unix. I can handle that. Right now, I am developing a command-line (python) application on a Windows machine, testing it in a DOS box (i.e. Windows' Command prompt), and then deploying it to Linux, and running it with PuTTY. I cannot handle that. My productivity drops dramatically when CTRL-C cuts in one window (Windows) and kills the process in another (DOS, Linux). My productivity drops dramatically when Enter copies the selection in one window (DOS), and deletes the selection in another (Windows), and runs the current half-edited command in the third (PuTTY). My productivity drops dramatically when I cannot hit Undo, Home or End. The Solution I am Seeking An SSH/Bash command-line client that runs on Windows and, to the extent possible, uses all the standard Windows shortcuts (Cut, Copy, Paste, Undo, Home, End, Insert, Shift-Arrows, etc.) work on a bash command line. Bonus points if it puts the cursor between letters, rather than on them. Plus, an equivalent DOS command-line drop-in that runs on Windows, and provides the same interface. I appreciate there may need to be special buttons to actually transfer CTRL codes (like CTRL-C) through in the cases I need them. I suspect the SSH client will need to be specific to a shell (so it knows when it is at the command prompt, and when it is inside a running app.) I know there are many SSH clients, but I am looking for advice for a particular need. PuTTY feels like an escape route for Unix programmers stuck on Windows. I am the opposite. Can anyone recommend one (or maybe a combination of an SSH client and an Command-Line replacement)?

    Read the article

  • No digital audio output with Asus Xonar DG

    - by Lunatik
    I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

    Read the article

  • What is the latest on Microsoft Expression Studio licensing?

    - by DanM
    In the past, there's been an issue with Microsoft not allowing you to deactivate an Expression Studio key. Basically, you get two keys per license. If you assign both keys (say one to a desktop and one to a laptop), then you upgrade to a new machine (say you replace your laptop or upgrade some of the hardware), you have to buy a new copy of Expression Studio ($600 for Ultimate). This seems ludicrous to me, and I'm wondering if anyone knows if this policy is still in place. I can't seem to find a EULA online anywhere, so I don't know where to find this information. I know my laptop is due for replacement soon, and I want to know if I'm going to have to sink $600 into a software product I already purchased. For background, please refer to this thread on the Microsoft Expression forums: http://social.expression.microsoft.com/Forums/en-US/general/thread/da5587bc-b098-4c6a-9a56-af3608d940d0 Note that this thread is locked. Microsoft doesn't seem to want people to discuss this. This is one reason I'm posting here rather than on that site.

    Read the article

  • What are some topics you'd like to see covered in an 'Introduction to Network Security' book?

    - by seth.vargo
    I'm trying to put together a list of topics in Network Security and prioritize them accordingly. A little background on the book - we are trying to gear the text towards college students, as an introduction to security, and toward IT professionals who have recently been tasked with securing a network. The idea is to create a book that covers the most vital and important parts of securing a network with no assumptions. So, if you were a novice student interested in network security OR an IT professional who needed a crash course on network security, what topics do you feel would be of the upmost importance in such a text?

    Read the article

  • Probability of failure with larger number of network elements

    - by MikeKulls
    I'm having a discussion with a work colleague. I'm saying that a network with 100 elements will have pretty much 10 times as many failures as a network with 10 elements, ie a tech will need to replace faulty hardware 10 times more often. He suggests that the failure rate doesn't go up in a linear fashion and the failure rate will be significantly less than 10x, in fact only slightly more failures. This is not the probability of an outage etc, we are just talking in relation to the amount of parts that a tech would need to swap out in a given time frame.

    Read the article

  • Should we develop a custom membership provider in this case?

    - by Allen
    I'll be adding a bounty to this, probably 200, more if you guys think its appropriate. I wont accept an answer until I can add a bounty so feel free to go ahead and answer now Summary Long story short, we've been tasked with gutting the authentication and authorization parts of a fairly old and bloated asp.net application that previously had all of these components written from scratch. Since our application isn't a typical one, and none of us have experience in asp.net's built in membership provider stuff, we're not sure if we should roll our own authentication and authorization again or if we should try to work within the asp.net membership provider mindset and develop our own membership provider. Our Application We have a fairly old asp.net application that gets installed at customer locations to service clients on a LAN. Admins create users (users do not sign up) and depending on the install, we may have the software integrated with LDAP. Currently, the LDAP integration bulk-imports the users to our database and when they login, it authenticates against LDAP so we dont have to manage their passwords. Nothing amazing there. Admins can assign users to 1 group and they can change the authorization of that group to manage access to various parts of the software. Groups are maintained by Admins (web based UI) and as said earlier, granted / denied permissions to certain functionality within the application. All this was completely written from the ground up without using any of the built in .net authorization or authentication. We literally have IsLoggedIn() methods that check for login and redirect to our login page if they aren't. Our Rewrite We've been tasked to integrate more tightly with LDAP, they want us to tie groups in our application to groups (or whatever types of containers that LDAP uses) in LDAP so that when a customer opt's to use our LDAP integration, they dont have to manage their users in LDAP AND in our application. The new way, they will simply create users in LDAP, add them to Groups in LDAP and our application will see that they belong to the appropriate LDAP group and authenticate and authorize them. In addition, we've been granted the go ahead to completely rip out the User authentication and authorization code and completely re-do it. Our Problem The problem is that none of us have any experience with asp.net membership provider functionality. The little bit of exposure I have to it makes me worry that it was not intended to be used for an application such as ours. Though, developing our own ASP.NET Membership Provider and Role Manager sounds like it would be a great experience and most likely the appropriate thing to do. Basically, I'm looking for advice, should we be using the ASP.NET Membership provider & Role Management API or should we continue to roll our own? I know this decision will be influenced by our requirements so I'm going over them below Our Requirements Just a quick n dirty list Maintain the ability to have a db of users and authenticate them and give admins (only, not users) the ability to CRUD users Allow the site to integrate with LDAP, when this is chosen, they don't want any users stored in the DB, only the relationship between Groups as they exist in our app / db and the Groups/Containers as they exist in LDAP. .net 3.5 is being used (mix of asp.net webforms and asp.net mvc) Has to work in ASP.NET and ASP.NET MVC (shouldn't be a problem I'm guessing) This can't be user centric, administrators need to be the only ones that CRUD (or import via ldap) users and groups We have to be able to Auth via LDAP when its configured to do so I always try to monitor my questions closely so feel free to ask for more info. Also, as a general summary of what I'm looking for in an answer is just. "You should/shouldn't use xyz, here's why". Links regarding asp.net membership provider and role management stuff are very welcome, most of the stuff I'm finding is 5+ years old. Edit: Added some stuff to "Our Rewrite"

    Read the article

  • Do superuser's prefer business grade or consumer grade PCs?

    - by joelhaus
    Having burned through a number of consumer grade laptops in recent years, I'm wondering if the additional cost of a business grade computer is a worth while investment. I'm considering getting a laptop with slightly lower specs to justify the added cost. The primary benefits I see are: (i) the notebook will be more reliable, (ii) have a longer life and (iii) the warranty (parts and labor) will be 3 years instead of 1 year. Are there any other considerations one should keep in mind when shopping for a business grade PC? Is purchasing direct from the manufacturer wise or are there other options that should be considered too? Thanks in advance!

    Read the article

  • How do I send an email with embedded images AND regular attachments in JavaMail?

    - by Chris
    Hi, I'd like to know how to build an SMTP multipart message in the correct order so that it will render correctly on the iPhone mail client (rendering correctly in GMail). I'm using Javamail to build up an email containing the following parts: A body part with content type "text/html; UTF-8" An embedded image attachment. A file attachment I am sending the mail via GMail SMTP (via SSL) and the mail is sent and rendered correctly using a GMail account, however, the mail does not render correctly on the iPhone mail client. On the iPhone mail client, the image is rendered before the "Before Image" text when it should be rendered afterwards. After the "Before Image" text there is an icon with a question mark (I assume it means it couldn't find the referenced CID). I'm not sure if this is a limitation of the iPhone mail client or a bug in my mail sending code (I strongly assume the latter). I think that perhaps the headers on my parts might by incorrect or perhaps I am providing the multiparts in the wrong order. I include the text of the received mail as output by gmail (which renders the file correc Message-ID: <[email protected]> Subject: =?UTF-8?Q?Test_from_=E3=82=AF=E3=83=AA=E3=82=B9?= MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_Part_0_20870565.1274154021755" ------=_Part_0_20870565.1274154021755 Content-Type: application/octet-stream Content-Transfer-Encoding: base64 Content-ID: <20100518124021763_368238_0> iVBORw0K ----- TRIMMED FOR CONCISENESS 6p1VVy4alAAAAABJRU5ErkJggg== ------=_Part_0_20870565.1274154021755 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 7bit <html><head><title>Employees Favourite Foods</title> <style> body { font: normal 8pt arial; } th { font: bold 8pt arial; white-space: nowrap; } td { font: normal 8pt arial; white-space: nowrap; } </style></head><body> Before Image<br><img src="cid:20100518124021763_368238_0"> After Image<br><table border="0"> <tr> <th colspan="4">Employees Favourite Foods</th> </tr> <tr> <th align="left">Name</th><th align="left">Age</th><th align="left">Tel.No</th><th align="left">Fav.Food</th> </tr> <tr style="background-color:#e0e0e0"> <td>Chris</td><td>34</td><td>555-123-4567</td><td>Pancakes</td> </tr> </table></body></html> ------=_Part_0_20870565.1274154021755 Content-Type: text/plain; charset=us-ascii; name=textfile.txt Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename=textfile.txt This is a textfile with numbers counting from one to ten beneath this line: one two three four five six seven eight nine ten(no trailing carriage return) ------=_Part_0_20870565.1274154021755-- Even if you can't assist me with this, I would appreciate it if any members of the forum could forward me a (non-personal) mail that includes inline images (not external hyperlinked images though). I just need to find a working sample then I can move past this. Thanks, Chris.

    Read the article

  • Log of cron actions on OS X

    - by Doug Harris
    Does the cron which comes with OS X log its actions anywhere? I'm not looking for output of any particular cron job, but rather log of what cron is doing. On a couple linux machines I've checked, there's /var/log/cron which has contents like: Apr 26 11:00:01 localhost crond[27755]: (root) CMD (/root/bin/mysql-backup) Apr 26 11:01:01 localhost crond[27892]: (root) CMD (run-parts /etc/cron.hourly) Apr 26 11:07:01 localhost crond[28138]: (root) CMD (/usr/local/bin/python /home/ user1/scripts/pythonscript.py) Apr 26 11:18:18 localhost crontab[28921]: (user2) LIST (user2) Apr 26 11:18:22 localhost crontab[28929]: (user2) BEGIN EDIT (user2) Apr 26 11:18:59 localhost crontab[28929]: (user2) REPLACE (user2) This shows when jobs ran, when users viewed or edited crontabs, etc. This stuff is nowhere that I've found on my Snow Leopard machine.

    Read the article

  • How to convert series of MP3 to a M4B in a batch

    - by Artem Tikhomirov
    Hello. I have a batch of MP3 based books. Some of them divide into files according to book's own structure: chapters and so on. Some of them was just divided into equally lengthened parts. So. I've bought an iPhone, and I want to convert them all to M4B format. How could I convert them in a batch? I mean how cold I set up a process once, for each book, and then, after couple of weeks, receive totally converted library. The only able program for such conversion I've found was Audiobook Builder for a Mac. But it is pretty slow and do not support batching in principle. Solutions for any platform, please.

    Read the article

  • What all laptops can replace a compaq presario v2000's monitor ?

    - by Nishant
    I am planning to buy laptop for parts/repair from Ebay to replace by broken LCD of Compaq presario v2000 . I know the monitor is 14" WXGA and LTNW140-l01 model made by samsung . I have removed the LCD panel and I can see 2 cables , one power and other video signal Can I buy a 14.1" LAPTOP and fit to this ? 14.1 WXGA seems very common . Please can any one tell which all laptops can replace this monitor ? I know HP DV 1000 does ? Any advices would be great .

    Read the article

  • No OS will boot, all freeze

    - by Gyan
    This is for a computer with the following configuration: Asus P5KPL-AM/PS motherboard Pentium D 820 (dual core 2.8 GHz) 1 x 2 GB DDR2-800 Transcend RAM 1 SATA2 Samsung 160 GB HDD 1 PATA LG CD/DVD Writer PS/2 generic Keyboard USB Razer mouse The computer was working fine till a month ago with a Hitachi HDD in place of the Samsung. But that drive died and I sent it in for warranty replacement. Since then and till last week, the computer had not been turned on. I then got hold of a spare but XPSP2-loaded Samsung drive from another computer and decided to get this computer temporarily running. However, when I tried to boot into XP, it didn't load. It got stuck at the first graphical screen. When trying Safe Mode, the file list would be updated up to diskio.sys and then freeze. If I tried to boot Kubuntu off a CD, I would get past the first menu, but then get stuck at the subsequent graphical interface in the loading process. A similar thing happend with a friend's Windows XP-on-a-pen-drive. I switched the RAM into the other slot, but no luck. Then I booted the Ultimate Boot CD and ran Memtest86+ and a couple of the bundled CPU stress tests but these detected no errors. Some searching on the Internet brought up the notion of the CPU failing to switch from "real" to "protected mode". I'm hoping to get a fix on what the problem is and what I can do about it. Edit: I've flashed to the latest BIOS, but that doesn't help. Also, Knoppix LiveCD also freezes. I notice that the LED in my mouse goes off at the time of freeze, but trying to boot without the mouse connected produces the same result.

    Read the article

  • No digital audio output with Asus Xonar DG

    - by Lunatik
    I've purchased an Asus Xonar DG as replacement for faulty onboard audio in a Medion 8822 as it has an optical output which is all I really need to feed my HTPC. I uninstalled the previous drivers/devices, switched the PC off, inserted the Asus card, powered up, disabled the onboard audio in the BIOS, then installed the driver that came on the CD (same version as on Asus' website as of today) and everything went perfectly - no errors. I set the audio devices up in Windows and in the Asus utility (SPDIF enabled, 6-ch audio) as I would expect to see them work, but the only thing is I have no digital audio from test tones within Windows/the Asus utility, PCM audio or Dolby Digital from DVD. Analogue audio is fine. I've uninstalled things and reinstalled a couple of times now, as well as trying almost all combinations of analogue/digital outputs but can't get it sorted. Does anyone have any tips on how to get this working? This card has just been released so there isn't much out there to go on. Notes: The light on the toslink port is lit. OS is Vista 32-bit SP2 and all up to date, pretty much a fresh install with almost no 3rd party applications installed This page seems to suggest that a digital output device in Windows is not needed with Xonar cards as it was with the previous Realtek so I have it set to Analog. The only other output device is S/PDIF pass-thru

    Read the article

  • Which Linux distribution for vehicle LCD instrument panel

    - by Brent
    I will be designing an instrument panel for a vehicle to display the common gauges that you would find in a car - (speedometer, rpm, fuel level, oil pressure, etc.). We have selected a 7" LCD and are in the process of narrowing down the hardware (This will use an ARM processor). The idea is to read these values off of the CAN Bus and update the UI with those values. This needs to have a fairly quick boot time, 5-10 seconds would be acceptable from the time the ignigtion is turned on to the time the UI is running. I have been doing a lot of research on which linux distribution to use, but I wanted to ask the question here to get the community's suggestions. I have been a .NET programmer for years, so linux is a new world to me. Here is what I have found so far... Tizen is geared for In-Vehicle Infotainment (IVI) (plus some others). However, this project is not an IVI, and I do not need the phone dialer, navigation, etc. Meego is dead, and Tizen seems to be the replacement Angstrom, Debian... would either of these be useful? I am not tied to a particular programming language or IDE. Any help and direction is appreciated!

    Read the article

  • LSI MegaRAID LINUX got Optimal after degradation but strange POST message

    - by kesrut
    Linux server box with LSI MegaRAID controller got degraded. But after some time RAID status changed to Optimal. Adapter 0 -- Virtual Drive Information: Virtual Drive: 0 (Target Id: 0) Name : RAID Level : Primary-1, Secondary-0, RAID Level Qualifier-0 Size : 2.727 TB Mirror Data : 2.727 TB State : Optimal Strip Size : 256 KB Number Of Drives per span:2 Span Depth : 3 Default Cache Policy: WriteBack, ReadAdaptive, Cached, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Cached, No Write Cache if Bad BBU Default Access Policy: Read/Write Current Access Policy: Read/Write Disk Cache Policy : Disk's Default Encryption Type : None Is VD Cached: No But now I'm getting RAID BIOS POST message: Your battery is either charging, bad or missing, and you have VDs configured for write-back mode. Because the battery is not currently usable, these VDs willl actually run in write-through mode until the battery is fully charged or replaced if it is bad or missing. (Image: http://cl.ly/image/1h1O093b1i2d) So may it be battery issue caused problem ? I get information about battery: BatteryType: iBBU Voltage: 4001 mV Current: 0 mA Temperature: 22 C Battery State : Operational BBU Firmware Status: Charging Status : None Voltage : OK Temperature : OK Learn Cycle Requested : No Learn Cycle Active : No Learn Cycle Status : OK Learn Cycle Timeout : No I2c Errors Detected : No Battery Pack Missing : No Battery Replacement required : No Remaining Capacity Low : No Periodic Learn Required : No Transparent Learn : No No space to cache offload : No Pack is about to fail & should be replaced : No Cache Offload premium feature required : No Module microcode update required : No Where can be problem ? I'm disabled alarms, but get them if enabled. But don't know how find root of problem.

    Read the article

  • Mac Mini drive problems but SMART verified: bad hard drive or controller?

    - by Zac Thompson
    I have a 3-year-old Intel Mac Mini at home. About a month ago, it stopped booting from the hard drive (internal, SATA, 80GB). I tried booting from the Install Disc to repair the filesystem but Disk Utility was unable to do so ("invalid node structure"). I was also unable to use the hard drive in the Terminal from the Install Disc nor from an Ubuntu boot CD ("DRDY err"). I could see the contents of some directories, but others would give an error and I would get failures when trying to copy files. At this point I was sure the filesystem was hosed and I'd want to reformat at least. DiskWarrior was able to let me retrieve the data files I was interested in, which are now copied to an external hard drive, but it reported a high number of problems ("speed reduced by disk malfunction" count was over 2000) when in the process of trying to rebuild the directory for the drive. It also would not let me use the rebuilt directory to replace the one on the drive; it claimed the disk errors prevented recovery in this way. Under normal circumstances I would now assume that the drive itself was going bad: DiskWarrior's "disk malfunction" error above is supposed to imply hardware problems. My initial plan was to buy a replacement for the internal 2.5" drive. However: Disk Utility, command-line tools and DiskWarrior had reported all along that the SMART status of the drive was okay/Verified. So I'm now worried that the drive hardware is actually fine, and that the problems were due to a disk controller that has gone "bad" somehow. If this is the case, I'll probably just replace the whole computer. Any advice on how I can tell what is to blame? I don't have a lot of extra hardware sitting around, so I don't have the option of simply dropping the drive in another machine or popping another hard drive inside the Mini.

    Read the article

  • Spamassassin: How to delete all spam messages on the server?

    - by Beck
    Can't find out, how to configure spamassassin to delete all spam messages. Currenly it's only mark messages as spam, but pass them throught IMAP to client. How to block them from passing through to IMAP clients? http://spamassassin.apache.org/full/3.3.x/doc/Mail_SpamAssassin_Conf.html And it's blocking some of our notification messages... -1.4 ALL_TRUSTED Passed through trusted hosts only via SMTP 0.0 HTML_MESSAGE BODY: HTML included in message 2.4 HTML_IMAGE_ONLY_08 BODY: HTML: images with 400-800 bytes of words 2.9 TVD_SPACE_RATIO BODY: TVD_SPACE_RATIO 1.7 MIME_HTML_ONLY BODY: Message only has text/html MIME parts 1.1 HTML_MIME_NO_HTML_TAG HTML-only message, but there is no HTML tag 1.1 HTML_SHORT_LINK_IMG_1 HTML is very short with a linked image -1.4 AWL AWL: From: address is in the auto white-list This is what clients getting on their mails in place of our notification messages. Any idea how to pass those messages through and how to delete incoming spam? Thanks ;) I have this setup: postfix spamassassin clamav-daemon amavis

    Read the article

  • Fonts in Google Chrome messed up

    - by user1850463
    I recently installed new fonts on my computer that my friend sent me so I can use them in Adobe Photoshop. When I downloaded the ".zip" folder containing the fonts I unzipped the folder, pressed Ctrl+A to highlight all of the font files and then I right clicked and clicked "Install". That is how I installed the fonts. Now the fonts in Google Chrome are messed up. When I go on websites such as Stackoverflow, Facebook, etc. the fonts are different and look really odd. Random parts of text are bolded or italized, etc. I'm using the latest version of Google Chrome and Windows 8 Pro. I took 3 screenshots to show you what I mean.

    Read the article

  • SQLRelay MySQL compatibility layer in php-cgi.

    - by sybreon
    I am investigating the use of sqlrelay as a middle-layer between an application that uses MySQL with a PostgreSQL backend. I assume that this is something that it can do to ease backend migration. But for the moment, I am just experimenting with a MySQL application accessing a MySQL backend through the sqlrelay layer. app => sqlrelay lib => mysql client lib => tcp => mysql server I followed the instructions for the MySQL drop-in replacement and it works. I can connect to the backend MySQL server using both sqlrsh and mysql client application. It will work for most MySQL applications by using LD_PRELOAD with the compatibility layer library. The instructions recommend re-compiling php to support it. I would prefer not doing something so drastic. They also recommend setting the LD_PRELOAD for apachectl as a method for the apache/php stack. However, this does not work with lighttpd/php-cgi. I have wrapped php-cgi with a shell script that sets LD_PRELOAD before running the cgi script. LD_PRELOAD=/usr/lib/libmysql50sqlrelay-0.39.4.so.1 /usr/bin/php5-cgi $@ I can see LD_PRELOAD correctly set in phpinfo() but the cgi scripts all fail and are unable to connect to the database. According to the mysql client, the compatibility library should report itself as a 5.0.0 client but the phpinfo module reports itself as the actual 5.0.51a client library used. This means that the compatibility library was not used. Is there someone who has had some success doing something similar?

    Read the article

< Previous Page | 100 101 102 103 104 105 106 107 108 109 110 111  | Next Page >