Search Results

Search found 29040 results on 1162 pages for 'ubuntu tweak'.

Page 107/1162 | < Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >

  • Copy from CDROM is very slow in Ubuntu

    - by ???
    I'm using the command to copy CDROM image: # dd if=/dev/sr0 of=./maverick.iso But it's very slow, at about 350k bytes/sec. I've searched the google, and try the command # hdparm -vi /dev/sr0 /dev/sr0: HDIO_DRIVE_CMD(identify) failed: Bad address IO_support = 1 (32-bit) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Inappropriate ioctl for device Model=DVD-ROM UJDA775, FwRev=DA03, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=unknown, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: ATA/ATAPI-1,2,3,4,5 * signifies the current active mode Seems like DMA is already on. And a device test gives: # hdparm -t /dev/sr0 /dev/sr0: Timing buffered disk reads: 2 MB in 6.58 seconds = 311.10 kB/sec # sudo hdparm -tT /dev/sr0 /dev/sr0: Timing cached reads: 2 MB in 2.69 seconds = 760.96 kB/sec Timing buffered disk reads: m 4 MB in 5.19 seconds = 789.09 kB/sec The CD-ROM device and disc should be okay because I can copy it very fast in Windows, using UltraISO utility. So I guess there is something not configured right in Ubuntu, is it?

    Read the article

  • Azure's Ubuntu 12.0.4 fails to install PHP5

    - by Alex Kennberg
    Similar to this article from Azure themselves: http://www.windowsazure.com/en-us/manage/linux/common-tasks/install-lamp-stack/ I am trying to install PHP5 on Ubuntu 12.0.4 virtual machine. However, it fails installing the ssl-cert. $ sudo apt-get install php5 Reading package lists... Done Building dependency tree Reading state information... Done php5 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 49 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up ssl-cert (1.0.28) ... Could not create certificate. Openssl output was: Generating a 2048 bit RSA private key ............................+++ ...................................................................................................................+++ writing new private key to '/etc/ssl/private/ssl-cert-snakeoil.key' ----- problems making Certificate Request 140320238503584:error:0D07A097:asn1 encoding routines:ASN1_mbstring_ncopy:string too long:a_mbstr.c:154:maxsize=64 dpkg: error processing ssl-cert (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ssl-cert E: Sub-process /usr/bin/dpkg returned an error code (1) Any tips appreciated.

    Read the article

  • Changes to grub in ubuntu 10

    - by jdege
    I've been running CentOS 5 for some years. I've decided to upgrade to Ubuntu, and with 10.04 just out, this seemed like a good time. I'm a tad paranoid, so I started off with a new set of drives - one to install on, one to backup to, and one as a spare. I removed my existing CentOS 5 drives, and did an install, and had no problems. I installed the server version, and used the default full-disk LVM installation. Next, I copies my backup scripts over, edited them to work with the new configuration, and did a test backup. That worked fine, as well. Then comes the real test, could I do an install of the backup onto the spare drive? (I won't put anything of importance on a system that doesn't have a reliable backup, and if I've never done a restore, it's not reliable.) I booted from a System Rescue CD (ver 1.5.3), with the spare drive as /dev/sda, and the backup drive as /dev/sdb. I had no trouble in partitioning, configuring LVM, formatting, making swap, or restoring the file systems. But when I got to restoring grub to the MBR, I ran into problems. My restore instructions from CentOS 5 said run grub, then enter two commands: root (hd0,0) setup (hd0) The first command exits with an error: "Checking if /boot/grub/stage1 exists ... no" I did some googling around, and found that the Grub2 included in recent Ubuntus is very different than the Grub 0.97 included in CentOS 5. One site suggested I use: grub-install --root-dir=/mnt/restore /dev/sda That appeared to work, but when I booted from the drive, I ended up at a grub prompt. Any ideas as to what I need to do? It seems like a simple problem, but my attempts at searching out answers on the web are being swamped by references to the old version of Grub. Help would be appreciated.

    Read the article

  • permanent NAS-mount in Ubuntu - wrong fs type, bad option, bad superblock

    - by Emil
    My network drive shows up in the file browser, just like my external usb-harddrive. Moving, running and editing files works. Hovering over it shows smb://lacie-2big/nasdisk . BUT, when I want to save a file, the drive doesn't come up as an option. All I can see is my other places, including my usb-harddrive. I am a complete newbie but I am GUESSING that it has something to do with the mount not being a "real" mount but just a shortcut to the smb location. So I ran the tutorial at https://wiki.ubuntu.com/MountWindowsSharesPermanently about how to "mount a network drive permanently". edited my fstab to //LaCie-2big/nasdisk /media/nasmount cifs guest,uid=1000,iocharset=utf8,codepage=unicode,unicode 0 0 and running sudo mount -a gave me the following error: mount: wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount. helper program) In some cases useful info is found in syslog - try dmesg | tail or so Now thats a very helpful error message, BUT, before I go any further, I'd be really thankful if one of you could tell me if I'm even in the right ballpark, or if my actual need: to be able to download files (ie torrents) directly to the drive, can be possible as it is already. Question: How to fix "wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program" when running mount -a

    Read the article

  • Problems with connecting Thunderbird client to dovecot installed on Ubuntu

    - by Michael Omer
    I am trying to connect a Thunderbird client to my dovecot server. The dovecot is installed on Ubuntu. I know that my server works (at least partially), since when I send a mail to a user in the server ([email protected]), I see the new file created in /home/feedback/Maildir/new. However, when I try to connect with my Thunderbird to the server, It recognizes the server, but informs me that my user/password is wrong (they are not wrong). The exact message is: Configuration could not be verified - is the username or password wrong? The server configuration it tries to connect to is: incoming - IMAP 143, outgoing - SMTP 587 The dovecot configuration file is located here: dovecot.conf My PAM configuration is: @include common-auth @include common-account @include common-session In the log, I see: May 23 06: 07: 20 misfortune dovecot: imap-login: Disconnected (no auth attempts): ? rip=77.126.236.118, lip=184.106.69.153 Dovecot -n gives me: Log_timestamp: %Y-%m-%d %H: %M: %S Protocols: pop3 pop3s imap imaps Ssl: no Login_dir: /var/run/dovecot/login Login_executable(default): /usr/lib/dovecot/imap-login Login_executable(imap): /usr/lib/dovecot/imap-login Login_executable(pop3): /usr/lib/dovecot/pop3-login Mail_privileged_group: mail Mail_location: maildir: ~/Maildir Mbox_write_locks: fcntl dotlock Mail_executable(default): /usr/lib/dovecot/imap Mail_executable(imap): /usr/lib/dovecot/imap Mail_executable(pop3): /usr/lib/dovecot/pop3 Mail_plugin_dir(default): /usr/lib/dovecot/modules/imap Mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap Mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 Imap_client_workarounds(default): tb-extra-mailbox-sep Imap_client_workarounds(imap): tb-extra-mailbox-sep Imap_client_workarounds(pop3): Auth default: passdb: driver: pam userdb: driver: passwd

    Read the article

  • Why Ubuntu could treat hosts file so strange?

    - by z4y4ts
    I have almost fresh Ubuntu desktop box. OS was installed two weeks ago and updated from karmic repositories. Last week I had no problems with DNS. But this week something had changed. I'm not sure what and when, and not sure whether I changed any configs. So now I have some really weird situation. According to logs name resolving should work normally. /etc/hosts 127.0.0.1 localhost test 127.0.1.1 desktop /etc/host.conf order hosts,bind multi on /etc/resolv.conf # Generated by NetworkManager search search servers obtained via DHCP nameserver 192.168.0.3 /etc/nsswitch.conf passwd: compat group: compat shadow: compat hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis But if fact it is not. user@test ~ping test PING localhost (127.0.0.1) 56(84) bytes of data. [skip] Pinging is ok. user@test ~host test test.myviacube.com has address xx.xxx.161.201 But pure I suspect that NetworkManager might cause this misbehavior, but don't know where to start to check it. Any thoughts, suggestions?

    Read the article

  • NVIDIA GeForce GT750M drivers for Ubuntu 13.10 on iMac

    - by Eugene B
    I have just got a new iMac 14.3 with 21.5' display. It has Intel i7 processor and NVIDIA GeForce GT750M graphics card with GPU (Device ID: 0x00fe9). I have installed Ubuntu 13.10 on it (dual boot with refit). Everything works fine apart from graphics. It is clear that graphics' not accelerated, and there are no drivers suggested in the "Additional drivers" section. I have tried to Install nvidia drivers from the repository. Download nvidia drivers and install them manually. Follow instructions here. Follow instructions here. Follow instructions here. Install bumblebee. Play around with xorg.conf file. Blacklist nouveau. As you may guess, nothing worked. The weirdest thing is, that when I boot from a LiveCD, it picks up screen resolution and all the rest correctly, though when I install the system to my Hard Drive it clearly does not have proper drivers. Does anyone have any suggestion what to do?

    Read the article

  • Ubuntu questions - important

    - by asdasd
    They had installed some modified edubuntu's at school... So i have some questions about setting some things up: How we can play HD videos ? They are made for windows machines and are in .wmv format but we need to play them on our multimedia class but don't know how - which player, which codecs etc. How to edit properly the /etc/apt/sources file ? Anything we try to install via apt-get it just says that E:\ is not available. Please tell me which repositories to put in there so we could be able to install some tools. Where are usually viruses/trojans put in ubuntu ? I mean in which directories ? Because our computers are behaving really slow and we need to check for some malware manually - we are not even allowed to install any kind of AV software. So tell me the usual directories and places for hiding such files, how are they hiddem, how to recognize them etc. Any others nice tricks/tips that we need to know. Thank you very much in advance.

    Read the article

  • No audio in my ubuntu system

    - by hap497
    Hi, I am running ubuntu 9.10. But there is no sound in my environment. When I go to System-Preference, there is no 'sound' entry there. $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: I82801AAICH [Intel 82801AA-ICH], device 0: Intel ICH [Intel 82801AA-ICH] Subdevices: 1/1 Subdevice #0: subdevice #0 $ lsmod Module Size Used by usb_storage 52576 3 binfmt_misc 8356 1 vboxvfs 34620 0 vboxvideo 1884 1 drm 159584 2 vboxvideo agpgart 34988 1 drm snd_intel8x0 30168 2 snd_ac97_codec 101216 1 snd_intel8x0 ac97_bus 1532 1 snd_ac97_codec snd_pcm_oss 37920 0 snd_mixer_oss 16028 1 snd_pcm_oss snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 2656 0 snd_seq_oss 28576 0 iptable_filter 3100 0 snd_seq_midi 6432 0 ip_tables 11692 1 iptable_filter x_tables 16544 1 ip_tables snd_rawmidi 22208 1 snd_seq_midi snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi ppdev 6688 0 snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event snd_timer 22276 2 snd_pcm,snd_seq snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq psmouse 56500 0 serio_raw 5280 0 snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_ti mer,snd_seq_device i2c_piix4 9932 0 parport_pc 31940 0 soundcore 7264 1 snd snd_page_alloc 9156 2 snd_intel8x0,snd_pcm vboxguest 143836 7 vboxvfs lp 8964 0 parport 35340 3 ppdev,parport_pc,lp pcnet32 32644 0 mii 5212 1 pcnet32 floppy 54916 0 ~:987:2$ lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter 00:03.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 40) 00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service 00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01) 00:06.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 0 00:0b.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller ~:988:3$

    Read the article

  • Enabling CURL on Ubuntu 11.10

    - by Afsheen Khosravian
    I have installed curl: sudo apt-get install curl libcurl3 libcurl3-dev php5-curl and I have updated my php.ini file to include(I also tried .so): extension=php_curl.dll To test if curl is working I created a file called testCurl.php which contains the following: <?php echo ‘<pre>’; var_dump(curl_version()); echo ‘</pre>’; ?> When I navigate to localhost/testCurl.php I get an error: HTTP Error 500 Heres a snippet from the error log: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/php_curl.dll' - /usr/lib/php5/20090626+lfs/php_curl.dll: cannot op$ PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/sqlite.so' - /usr/lib/php5/20090626+lfs/sqlite.so: cannot open sha$ [Sun Dec 25 12:10:17 2011] [notice] Apache/2.2.20 (Ubuntu) PHP/5.3.6-13ubuntu3.3 with Suhosin-Patch configured -- resuming normal operations [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/ [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/ [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/ [Sun Dec 25 12:13:46 2011] [error] [client 127.0.0.1] File does not exist: /var/www/css, referer: http://localhost/` Can anyone help me to get curl working? The problem was with the original test code. I used a new test file containing this and curl is now working: <?php ## Test if cURL is working ## ## SCRIPT BY WWW.WEBUNE.COM (please do not remove)## echo '<pre>'; var_dump(curl_version()); echo '</pre>'; ?>

    Read the article

  • Login with Enterprise Principal Name using sssd AD backend in Ubuntu 14.04 LTS

    - by Vinícius Ferrão
    I’m running sssd version 1.11 with the AD backend in Ubuntu 14.04 LTS (1.11.5-1ubuntu3) to authenticate users from Active Directory running on Windows Server 2012 R2, and I’m trying to achieve logins with the User Principal Name for all users of the domain. But the UPN are always Enterprise Principal Names. Let-me illustrate the problem with my user account: Domain: local.example.com sAMAccountName: ferrao UPN: [email protected] (there’s no local in the UPN) I can successfully login with the sAMAccountName atribute, which is fine, but I can’t login with [email protected] which is my UPN. The optimum solution for me is to allow logins from sAMAccountName and the UPN (User Principal Name). If’s not possible, the UPN should be the right way instead of the sAMAccountName. Another annoyance is the homedir pattern with those options in sssd.conf: default_shell = /bin/bash fallback_homedir = /home/%d/%u What I would like to achieve is separated home directories from the EPN. For example: /home/example.com/user /home/whatever.example.com/user But with this pattern I can’t map the way I would like to do. I’ve looked through man pages and was unable to find any answers for this issues. Thanks,

    Read the article

  • Ubuntu 10.04 RGBA(Transparent theme) bug

    - by Nrew
    I tried to follow this tutorial frome ghacks.net. But I end up with a bug. Everytime I try to change the desktop background or the theme. It opens up lots of folders. And then close it back again. So I cannot do anything when I try to change the background or the theme to the default. Here is the tutorial And I can't even shutdown my machine now, please help. EDIT I tried executing these commands in the terminal sudo add-apt-repository ppa:erik-b-andersen/rgba-gtk sudo apt-get update && sudo apt-get upgrade sudo apt-get install gnome-color-chooser gtk2-module-rgba sudo apt-get install murrine-themes And it installed gnome color changer. It works, and the windows became transparent, but I can't change to the default theme and I can't put a background Here's the screenshot, when I try to change something in the preferences: Its just okay if I can't change the theme, but it won't let me change the background either. Or maybe the background is changed but its transparent just like the other windows. You can see that in the taskbar(or whatever its called in Ubuntu). Its full. What can I do to atleast make the background visible.

    Read the article

  • Ubuntu second static IP, ifconfig, /etc/network/interfaces

    - by Schmoove
    I would like to add a second static IP to my local Ubuntu 11.10 desktop machine and have it automatically available after rebooting. So far I am successfully using ifconfig to to temporarily set up an alias for my primary network interface: # ifconfig eth1:0 192.168.178.3 up # ifconfig eth1 Link encap:Ethernet HWaddr c8:60:00:ef:a3:d9 inet addr:192.168.178.2 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::ca60:ff:feef:a3d9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:61929 errors:0 dropped:0 overruns:0 frame:0 TX packets:64034 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:45330863 (45.3 MB) TX bytes:28175192 (28.1 MB) Interrupt:42 Base address:0x4000 eth1:0 Link encap:Ethernet HWaddr c8:60:00:ef:a3:d9 inet addr:192.168.178.3 Bcast:192.168.178.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:42 Base address:0x4000 However, when I add the following to /etc/network/interfaces, the alias is not up and running as expected after a reboot: # vi /etc/network/interfaces auto eth1:0 iface eth1:0 inet static address 192.168.178.3 netmask 255.255.255.0 I would like to know what to configure to get this to work. As a side note, I am running gnome shell.

    Read the article

  • Ubuntu init.d script not being called on startup

    - by Mike
    I've got a script in ubuntu 9.04 in init.d that I've set to run on start on with update-rc.d using update-rc.d init_test defaults 99. All of the symlinks are there and the permissions appear to be correct -rwxr-xr-x 1 root root 642 2010-10-28 16:44 init_test mike@xxxxxxxxxx:~$ find /etc -name S99* | grep init_test find: /etc/rc5.d/S99init_test find: /etc/rc4.d/S99init_test find: /etc/rc2.d/S99init_test find: /etc/rc3.d/S99init_test The script runs through source and ./ without issue and behaves correctly. Here is the source of the script: #!/bin/bash ### BEGIN INIT INFO # Provides: init test script # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO start() { echo "hi" echo "start called" >> /tmp/test.log return } stop() { echo "Stopping" } echo "Script called" >> /tmp/test.log case "$1" in start) start ;; stop) stop ;; *) echo "Usage: {start|stop|restart}" exit 1 ;; esac exit $? When the machine starts, I don't see "script called" or "start called" in the test.log at all. Is there anything obvious I'm messing up?

    Read the article

  • Unable to receive emails from Ubuntu postfix mail server

    - by Paddington
    I am unable to receive emails on an Ubuntu 11.04 server running postfix with the Plesk control panel. I can't see the mails even on webmail. I am able to send emails and am not getting any error messages on the email client when I try to receive. Here is the output of the logs: *tail -f /usr/local/psa/var/log/maillog Aug 29 10:38:31 cp9 postfix/tlsmgr[3811]: fatal: open database /var/lib/postfix/smtpd_scache.db: Invalid argument Aug 29 10:38:32 cp9 postfix/master[27738]: warning: process /usr/lib/postfix/tlsmgr pid 3811 exit status 1 Aug 29 10:38:32 cp9 postfix/master[27738]: warning: /usr/lib/postfix/tlsmgr: bad command startup -- throttling Aug 29 10:38:36 cp9 pop3d: Connection, ip=[::ffff:196.201.7.158] Aug 29 10:38:36 cp9 pop3d: IMAP connect from @ [::ffff:196.201.7.158]INFO: LOGIN, [email protected], ip=[::ffff:196.201.7.158] Aug 29 10:38:37 cp9 pop3d: 1346229517.874008 LOGOUT, [email protected], ip=[::ffff:196.201.7.158], top=0, retr=0, time=1, rcvd=24, sent=1716, maildir=/var/qmail/mailnames/essentialhuku.co.za/earle/Maildir Aug 29 10:14:05 cp9 postfix/tlsmgr[1133]: fatal: open database /var/lib/postfix/smtpd_scache.db: Invalid argument Aug 29 10:14:06 cp9 postfix/master[27738]: warning: process /usr/lib/postfix/tlsmgr pid 1133 exit status 1 Aug 29 10:14:06 cp9 postfix/master[27738]: warning: /usr/lib/postfix/tlsmgr: bad command startup -- throttling Aug 29 10:14:08 cp9 pop3d: Connection, ip=[::ffff:196.201.7.158

    Read the article

  • php on ubuntu 13.10 won't get parsed

    - by fefe
    I'm facing a strange issue with a fresh installed ubuntu 13.10 apache2 with mysql and php. My php won't get parsed and I have been doing every changes what I found during my researches PHP 5.5.3-1ubuntu2 (cli) (built: Oct 9 2013 14:49:12) sudo a2enmod php5 apache2.conf <FilesMatch \.php$> SetHandler application/x-httpd-php </FilesMatch> /etc/apache2/mods-enabled/php5.conf </FilesMatch> # Deny access to files without filename (e.g. '.php') <FilesMatch "^\.ph(p[345]?|t|tml|ps)$"> Order Deny,Allow Deny from all </FilesMatch> # Running PHP scripts in user directories is disabled by default # # To re-enable PHP in user directories comment the following lines # (from <IfModule ...> to </IfModule>.) Do NOT set it to On as it # prevents .htaccess files from disabling it. #<IfModule mod_userdir.c> # <Directory /home/*/public_html> # php_admin_value engine Off # </Directory> #</IfModule>

    Read the article

  • Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

    - by cpm
    I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

    Read the article

  • Mongrel Cluster on Ubuntu Server Karmic

    - by trobrock
    I am trying to get mongrel cluster working on my Ubuntu Server Karmic box in preparation to setup Capistrano. I've been trying to get the two to work all day and finally decided to completely remove Capistrano and see if I can just get Mongrel Cluster to work. I ran this to install mongrel cluster: gem install mongrel mongrel_cluster Everything installed fine, when I change into my app's directory... # mongrel_rails -bash: mongrel_rails: command not found I can run it from its install location: # /var/lib/gems/1.8/bin/mongrel_rails Usage: mongrel_rails <command> [options] Available commands are: ... It lets me build the cluster configuration file fine, but when I run the clister:start command: # /var/lib/gems/1.8/bin/mongrel_rails cluster::start starting port 8000 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8000 -P tmp/pids/mongrel.8000.pid -l log/mongrel.8000.log starting port 8001 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8001 -P tmp/pids/mongrel.8001.pid -l log/mongrel.8001.log starting port 8002 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8002 -P tmp/pids/mongrel.8002.pid -l log/mongrel.8002.log It seems it isnt calling it from the right directory after that command, what can I do to fix this? I tried setting the path previously when trying to set up Capistrano, but the path didnt stay set when Capistrano used ssh to run the commands.

    Read the article

  • Netbook (Samsung N220) on Ubuntu 10.04 slows down WiFi for other computers

    - by Joachim
    I encountered a really odd problem with my new netbook. I am running Ubuntu 10.04 on a Samsung N220 Mito. So far everything worked fine. Now I tried the machine for the first time in our work group where we have a wifi (with internet access) for all laptops. The wifi is controlled by a computer running Suse 9.3 which provides a DHCP server and imposes a firewall. At the moment there is only a macbook in the wifi, where no problems with the internet or wifi connection are encountered. Now coming to my actual problem: In addition to the macbook i connect the Samsung N220 to the Wifi. Problem: My download speed is for some reason limited to 70KB/s max. This is neither a limitation of the server/website i browse on, nor a configuration of the netbook: at home i have 500KB/s download speeds. Furthermore, it is not a default limitation for "untrusted" or "new machines" in the wifi, as for instance other new laptops get full speed internet with our wifi. Problem: Once the Samsung N220 is generating traffic in the wifi, the wifi is slowed down dramatically for all other machines: I run a ping to the router from the macbook. The ping times with the N220 ideling are 2-6ms. When I start downloading or browsing in the web with the N220 the ping speed drops to 800ms. Vice versa, when the macbook is generating the traffic the ping of the N220 to the rooter stays constant at around 2-6ms. So clearly, it is some problem originating from my netbook or maybe its treatment in the wifi. Thanks for any help

    Read the article

  • Ubuntu upgrade process failed

    - by Spin0us
    I tried to dist-upgrade my ubuntu server on my percona cluster but it failed with this message The following packages have unmet dependencies: libmysqlclient18 : Depends: libmariadbclient18 (= 5.5.33a+maria-1~precise) but it is not installable And here is the package listing # dpkg --list | grep -E 'percona|mysql' ii libdbd-mysql-perl 4.020-1build2 Perl5 database interface to the MySQL database iU libmysqlclient18 5.5.33a+maria-1~precise Virtual package to satisfy external depends ii mariadb-common 5.5.33a+maria-1~precise MariaDB database common files (e.g. /etc/mysql/conf.d/mariadb.cnf) ii percona-xtrabackup 2.1.5-680-1.precise Open source backup tool for InnoDB and XtraDB ii percona-xtradb-cluster-client-5.5 5.5.31-23.7.5-438.precise Percona Server database client binaries ii percona-xtradb-cluster-common-5.5 5.5.33-23.7.6-496.precise Percona Server database common files (e.g. /etc/mysql/my.cnf) ii percona-xtradb-cluster-galera-2.x 157.precise Galera components of Percona XtraDB Cluster ii percona-xtradb-cluster-server-5.5 5.5.31-23.7.5-438.precise Percona Server database server binaries ii php5-mysql 5.3.10-1ubuntu3.8 MySQL module for php5 During the install of the server, mariadb and galera cluster have first been installed. Then removed to be replaced by percona XtraDBCluster. So i think this is the source of the problem. But how can i resolve this without reinstalling all ? UPDATE 1 # apt-cache policy libmariadbclient18 libmariadbclient18: Installed: (none) Candidate: (none) Version table: 5.5.32+maria-1~precise 0 100 /var/lib/dpkg/status

    Read the article

  • Setup: Eclipse in Ubuntu with Apache2 and Subversion

    - by Ricalsin
    Trying to setup Eclispe. I am running ubuntu 10.10 (Maverick). Apache2.2.16 Subversion 1.6.12 The Eclipse help/about/installed software says: Eclipse Platform 3.5.2 Subclipse 1.0.0 Version Control with Subversion 1.1.1 The Subclips wiki I followed is here I have installed the libsvn-java app as discussed. I added the line "-Djava.library.path=/usr/lib/jni" to the eclipse.ini file I checked the Eclipse help/about/confirguration settings and both of these lines are listed: eclipse.vmargs=-Djava.library.path=/usr/lib/jni java.library.path=/usr/lib/jni I checked that those files are in those directories. Still, when I check the preferencesteamsvn an error dialog shows: Failed to load JavaHL Library. These are the errors that were encountered: no libsvnjavahl.1 in java.library.path Incompatible JavaHL library loaded 1.3.x or later required I followed the "Testing JavaHL libraries" troubleshooting section at the bottom of the wiki: I downloaded the tarbal and ran it in a folder on my desktop with no problems. Then, I followed the instructions and placed that file INSIDE the path (usr/lib/jni/testJavaHL) and ran it from there. There are 50 tests performed and each one of them came back with this same error (posting only one for brevity): 50) testCommitRevprops(org.tigris.subversion.javahl.BasicTests)java.io.FileNotFoundException: /usr/lib/jni/testJavaHL/local_tmp/greek_files/iota (No such file or directory) at java.io.FileOutputStream.open(Native Method) at java.io.FileOutputStream.<init>(FileOutputStream.java:209) at java.io.FileOutputStream.<init>(FileOutputStream.java:160) at org.tigris.subversion.javahl.WC.materialize(WC.java:70) at org.tigris.subversion.javahl.SVNTests.buildGreekFiles(SVNTests.java:303) at org.tigris.subversion.javahl.SVNTests.setUp(SVNTests.java:222) at org.tigris.subversion.javahl.RunTests.main(RunTests.java:111) FAILURES!!! Tests run: 50, Failures: 0, Errors: 50 Any ideas as to how/why the "local_tmp/greek_files/iota" is appended to the directory? I assume that's my problem.. I'm also having a problem with newrepository location = ...as the directory location of my svn repository is one level above the home directory - which is prepended to whatever I place in the dialog box - resulting in this error: svn: '/home/ricalsin/file:/home/svn' does not exist Thank you for any help.

    Read the article

  • Can't get rsync over sftp to work

    - by Patrik
    I'm trying to set up a backup system from an Ubuntu server to a Synology NAS (DS413j) using rsync and sftp. I have created a user for this that we can call ubuntu-backup. I have a directory in ubuntu-backup home directory called www where the backup will be saved. I have enabled Network Backup in DSM The user ubuntu-backup has full access to it's home directory Here is my rsync config file on the Synology NAS: #motd file = /etc/rsyncd.motd #log file = /var/log/rsyncd.log pid file = /var/run/rsyncd.pid lock file = /var/run/rsync.lock use chroot = no [NetBackup] path = /var/services/NetBackup comment = Network Backup Share uid = root gid = root read only = no list = yes charset = utf-8 auth users = root secrets file = /etc/rsyncd.secrets [ubuntu-backup] path = /volume1/homes/ubuntu-backup/www comment = Ubuntu Backup uid = ubuntu-backup gid = users read only = false auth users = ubuntu-backup secrets file = /etc/rsyncd.secrets The permissions on /volume1/homes/ubuntu-backup/www is ubuntu-backup:users 777 Here is the command i'm running. rsync -aHvhiPb /var/www/ [email protected]:./ The result: sending incremental file list ERROR: module is read only rsync error: syntax or usage error (code 1) at main.c(1034) [Receiver=3.0.9] rsync: connection unexpectedly closed (9 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(605) [sender=3.0.9] If I'm running this: rsync -aHvhiPb /var/www/ [email protected] It looks like its sending files. No errors. But I cant find anything on the NAS.

    Read the article

  • Dell OpenManage On Ubuntu Server 12.04 Cannot Log In

    - by Austin
    I have a Dell Poweredge 2950 with 2X130GB and 2X2TB drives. I need to set them up in a RAID 1 array so that the 130GB Drives are mirrored and host the OS, while the 2TB drives are mirrored and are the content drives. So I go from 4 disks, down to two, one 130GB and one 2TB. I can do that in the BIOS RAID utility no problem. But I need to be able to manage the RAID arrays and be able to expand them WITHOUT shutting down the server. Now, to my understanding, openmanage will allow me to do that AND it runs on ubuntu. So I go and set it up and try to log into the web interface at and it will not let me log in. I have followed dell's guide to set up openmanage, even added the usernames to the files and permissions and such, however, cannot get it to let me log in or anything. I have reinstalled Openmanage several times, even reinstalled the OS three times, and nothing works. Google does not help either. It simply says login failed after hitting submit. Please Help

    Read the article

  • Ubuntu Equivalent of Unix Command cp -n

    - by Ted Karmel
    A software I need to install on my Ubuntu Hardy has a MAKE file which includes the command cp -n. However, I get an error stating the -n is an invalid option. The command will work on a Mac terminal but I need it to work on Ubuntu. Does anyone know the equivalent command for Ubuntu? Thanks.

    Read the article

  • Samba4/Ubuntu Shares Incorrectly Available to All Users

    - by Dan
    I've got my Ubuntu server working with Samba4 and got it set up as the Primary domain controller on my network with AD and all that goodness. However, I'm trying to get my Samba configuration to work with the users and groups I've defined with the Active Directory tools from Windows. For instance, I've got a share X which I want users A and B (as part of the 'management' group, known as LLGrpManager in my setup) to see, but no body else. However, after making changes to the configuration, restarting Samba, I test by connecting to the share with my Mac over Samba as user 'C' which isn't part of the management group, and I can, incorrectly, see the X share. I've tried alsorts of combinations of specifying the group with no luck at all. I've got a feeling that my global config might be too lenient or something to do with file permissions but being a bit green, I'm without clue. My /etc/samba/smb.conf # Global parameters [global] server role = domain controller server string = Office Server workgroup = LLDOMAIN realm = lldomain.local netbios name = DUMBO passdb backend = samba4 logon path = \\%L\profiles\%U logon drive = L: log file = /var/log/samba/%m.log max log size = 50 security = ads domain logons = yes domain master = auto usershare allow guests = no valid users = %S [netlogon] path = /var/lib/samba/sysvol/lldomain.local/scripts read only = no guest ok = no [sysvol] path = /var/lib/samba/sysvol read only = No guest ok = no valid users = @LLDOMAIN\LLGrpManager [ShareX] path = /data comment = Entire Data Volume guest ok = no comment = Entire Data Volume guest ok = no valid users = @LLDOMAIN\LLGrpManager admin users = @LLDOMAIN\LLGrpManager browsable = no inherit acls = yes inherit permissions = yes ... My /etc/nsswitch.conf I've also instructed the system to use the nss winbind library when searching for users or groups by adding the stanza passwd and group in /etc/nsswitch.conf: passwd: compat winbind group: compat winbind shadow: compat Permissions on the folder in question drwxrwxrwt 8 root root 4.0K Oct 28 19:11 data

    Read the article

< Previous Page | 103 104 105 106 107 108 109 110 111 112 113 114  | Next Page >