Search Results

Search found 12546 results on 502 pages for 'aidan host'.

Page 108/502 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• 12.04lts: no network internet

  - by dgermann

  Friends-- Cannot connect reliably to ethernet nor at all to Internet: Symptoms: About 2 weeks ago did an upgrade. Have not been able to connect to ethernet nor Internet. Today, for example, boot up this System76 laptop and there was no network connection. Did sudo mount -a and got some internal network connectivity: doug@ubuntu:/sam$ ping earth PING earth (192.168.0.201) 56(84) bytes of data. 64 bytes from earth (192.168.0.201): icmp_req=1 ttl=64 time=0.160 ms 64 bytes from earth (192.168.0.201): icmp_req=2 ttl=64 time=0.177 ms 64 bytes from earth (192.168.0.201): icmp_req=3 ttl=64 time=0.159 ms ^C --- earth ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.159/0.165/0.177/0.013 ms doug@ubuntu:/sam$ ping doug2 PING doug (192.168.0.4) 56(84) bytes of data. ^C --- doug ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 1999ms doug@ubuntu:/sam$ ping sharon PING sharon (192.168.0.111) 56(84) bytes of data. 64 bytes from sharon (192.168.0.111): icmp_req=1 ttl=128 time=0.276 ms ^C --- sharon ping statistics --- 6 packets transmitted, 1 received, 83% packet loss, time 5031ms rtt min/avg/max/mdev = 0.276/0.276/0.276/0.000 ms doug@ubuntu:/sam$ ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 6 packets transmitted, 0 received, 100% packet loss, time 4999ms doug@ubuntu:/sam$ ping earth PING earth (192.168.0.201) 56(84) bytes of data. ^C --- earth ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4032ms doug@ubuntu:/sam$ ping yahoo.com ping: unknown host yahoo.com doug@ubuntu:/sam$ ping ubuntu.com ping: unknown host ubuntu.com doug@ubuntu:/sam$ ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 14 packets transmitted, 0 received, 100% packet loss, time 13103ms Note that earth is the cifs server, and one time pinging it worked, later failed. Clues: doug@ubuntu:/sam$ grep -i eth /var/log/syslog |tail Aug 23 15:32:46 ubuntu kernel: [ 5328.070401] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:32:48 ubuntu kernel: [ 5330.651139] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=19090 PROTO=2 Aug 23 15:34:51 ubuntu kernel: [ 5453.072279] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:34:55 ubuntu kernel: [ 5457.085433] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16137 PROTO=2 Aug 23 15:36:56 ubuntu kernel: [ 5578.074492] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:37:00 ubuntu kernel: [ 5582.359006] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16150 PROTO=2 Aug 23 15:39:01 ubuntu kernel: [ 5703.074410] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:39:03 ubuntu kernel: [ 5705.070122] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16163 PROTO=2 Aug 23 15:41:06 ubuntu kernel: [ 5828.074387] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 Aug 23 15:41:13 ubuntu kernel: [ 5835.319941] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=23298 PROTO=2 doug@ubuntu:/sam$ ifconfig -a eth0 Link encap:Ethernet HWaddr [BLANKED] inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::21b:fcff:fe29:9dfc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3961 errors:0 dropped:0 overruns:0 frame:0 TX packets:2007 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:991204 (991.2 KB) TX bytes:252908 (252.9 KB) Interrupt:16 Base address:0xec00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2190 errors:0 dropped:0 overruns:0 frame:0 TX packets:2190 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:168052 (168.0 KB) TX bytes:168052 (168.0 KB) wlan0 Link encap:Ethernet HWaddr 00:19:d2:72:5a:0c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) doug@ubuntu:/sam$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off eth0 no wireless extensions. doug@ubuntu:/sam$ lsmod Module Size Used by des_generic 21191 0 md4 12523 0 nls_iso8859_1 12617 1 nls_cp437 12751 1 vfat 17308 1 fat 55605 1 vfat usb_storage 39646 1 dm_crypt 22528 1 joydev 17393 0 snd_hda_codec_analog 75395 1 snd_hda_intel 32719 2 pcmcia 39826 0 snd_hda_codec 109562 2 snd_hda_codec_analog,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec ip6t_LOG 16846 4 xt_hl 12465 6 ip6t_rt 12473 3 snd_pcm 80916 2 snd_hda_intel,snd_hda_codec nf_conntrack_ipv6 13581 7 nf_defrag_ipv6 13175 1 nf_conntrack_ipv6 ipt_REJECT 12512 1 ipt_LOG 12783 5 xt_limit 12541 12 xt_tcpudp 12531 21 xt_addrtype 12596 4 snd_seq_midi 13132 0 xt_state 12514 14 ip6table_filter 12711 1 ip6_tables 22528 3 ip6t_LOG,ip6t_rt,ip6table_filter nf_conntrack_netbios_ns 12585 0 nf_conntrack_broadcast 12541 1 nf_conntrack_netbios_ns nf_nat_ftp 12595 0 nf_nat 24959 1 nf_nat_ftp nf_conntrack_ipv4 19084 9 nf_nat nf_defrag_ipv4 12649 1 nf_conntrack_ipv4 nf_conntrack_ftp 13183 1 nf_nat_ftp nf_conntrack 73847 8 nf_conntrack_ipv6,xt_state,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp iptable_filter 12706 1 ip_tables 18106 1 iptable_filter snd_rawmidi 25424 1 snd_seq_midi psmouse 86982 0 x_tables 22011 13 ip6t_LOG,xt_hl,ip6t_rt,ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,xt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables arc4 12473 2 r592 17808 0 snd_seq_midi_event 14475 1 snd_seq_midi memstick 15857 1 r592 yenta_socket 27465 0 serio_raw 13027 0 pcmcia_rsrc 18367 1 yenta_socket iwl3945 73186 0 pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc iwl_legacy 71334 1 iwl3945 snd_seq 51592 2 snd_seq_midi,snd_seq_midi_event mac80211 436493 2 iwl3945,iwl_legacy snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq rfcomm 38139 0 bnep 17830 2 parport_pc 32114 0 bluetooth 158447 10 rfcomm,bnep ppdev 12849 0 cfg80211 178877 3 iwl3945,iwl_legacy,mac80211 asus_laptop 23693 0 sparse_keymap 13658 1 asus_laptop input_polldev 13648 1 asus_laptop nls_utf8 12493 6 cifs 258037 10 snd 62218 13 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd mac_hid 13077 0 snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp i915 428418 3 firewire_ohci 40172 0 sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci firewire_core 56940 1 firewire_ohci crc_itu_t 12627 1 firewire_core r8169 56396 0 drm_kms_helper 45466 1 i915 drm 197641 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19115 1 i915 doug@ubuntu:/sam$ dmesg |grep eth [ 0.116936] i2c-core: driver [aat2870] using legacy suspend method [ 0.116939] i2c-core: driver [aat2870] using legacy resume method [ 1.453811] r8169 0000:03:07.0: eth0: RTL8169sb/8110sb at 0xf840ec00, [BLANKED], XID 10000000 IRQ 16 [ 1.453815] r8169 0000:03:07.0: eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 25.681231] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 154.037318] r8169 0000:03:07.0: eth0: link down [ 154.037329] r8169 0000:03:07.0: eth0: link down [ 154.037596] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 155.583162] r8169 0000:03:07.0: eth0: link up [ 155.583366] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 156.637048] r8169 0000:03:07.0: eth0: link down [ 156.637066] r8169 0000:03:07.0: eth0: link down [ 156.637339] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 156.773699] r8169 0000:03:07.0: eth0: link down [ 156.773983] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 158.456181] r8169 0000:03:07.0: eth0: link up [ 158.456378] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 159.364468] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 162.384496] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=38877 PROTO=2 [ 166.272457] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 166.422333] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=40695 PROTO=2 [ 168.736049] eth0: no IPv6 routers present [ 183.572472] r8169 0000:03:07.0: eth0: link down [ 183.572490] r8169 0000:03:07.0: eth0: link down [ 183.572934] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 185.204801] r8169 0000:03:07.0: eth0: link up [ 185.205005] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3620.680451] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3621.068431] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3624.912973] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9118 PROTO=2 [ 3631.088069] eth0: no IPv6 routers present [ 3703.062980] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3703.465330] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9210 PROTO=2 [ 3828.062951] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3833.617772] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=9749 PROTO=2 [ 3953.062920] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 3955.675129] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15983 PROTO=2 [ 4078.062922] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4078.386319] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15997 PROTO=2 [ 4203.062899] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4203.559241] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16011 PROTO=2 [ 4328.062833] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4328.930922] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16027 PROTO=2 [ 4453.062811] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4453.950224] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16039 PROTO=2 [ 4578.062742] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4580.626432] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=13738 PROTO=2 [ 4703.062704] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4706.310170] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=15942 PROTO=2 [ 4828.062707] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4832.174324] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16505 PROTO=2 [ 4953.062628] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 4961.469282] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16090 PROTO=2 [ 5078.062552] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5080.776462] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17239 PROTO=2 [ 5203.070394] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5205.358134] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=17665 PROTO=2 [ 5328.070401] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5330.651139] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=19090 PROTO=2 [ 5453.072279] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5457.085433] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16137 PROTO=2 [ 5578.074492] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5582.359006] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16150 PROTO=2 [ 5703.074410] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5705.070122] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED]--- SRC=192.168.0.10 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=16163 PROTO=2 [ 5828.074387] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5835.319941] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=23298 PROTO=2 [ 5953.074429] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 [ 5961.925481] [UFW BLOCK] IN=eth0 OUT= MAC=[BLANKED][BLANKED]--- SRC=192.168.0.5 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=24261 PROTO=2 doug@ubuntu:/sam$ lspci -nnk |grep -iA2 eth 03:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10) Subsystem: ASUSTeK Computer Inc. Device [1043:11e5] Kernel driver in use: r8169 doug@ubuntu:/sam$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 doug@ubuntu:/sam$ nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Ifupdown (eth0)] ---------------------------------------------- Type: Wired Driver: r8169 State: connected Default: yes HW Address: [BLANKED] Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.7 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwl3945 State: disconnected Default: no HW Address: 00:19:D2:72:5A:0C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points ATT592: Infra, 30:60:23:76:FE:60, Freq 2437 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2 doug@ubuntu:/sam$ nslookup ubuntu.com ;; connection timed out; no servers could be reached doug@ubuntu:/sam$ dig ubuntuforums.org ; <<>> DiG 9.8.1-P1 <<>> ubuntuforums.org ;; global options: +cmd ;; connection timed out; no servers could be reached doug@ubuntu:/sam$ sudo ifconfig eth0 up doug@ubuntu:/sam$ dhcpcd eth0 The program 'dhcpcd' can be found in the following packages: * dhcpcd * dhcpcd5 Try: sudo apt-get install <selected package> doug@ubuntu:/sam$ lspci -k 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 1252 Kernel driver in use: i915 Kernel modules: intelfb, i915 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 1252 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel modules: leds-ss4200, iTCO_wdt, intel-rng 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel modules: i2c-i801 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection Kernel driver in use: iwl3945 Kernel modules: iwl3945 03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08) Subsystem: ASUSTeK Computer Inc. Device 1297 Kernel driver in use: r592 Kernel modules: r592 03:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller (rev 10) Subsystem: ASUSTeK Computer Inc. Device 11e5 Kernel driver in use: r8169 Kernel modules: r8169 doug@ubuntu:/sam$ Things I have tried: sudo start network-manager: no help gksudo gedit /etc/network/interfaces changed line to iface eth0 inet dhcp: no help gksudo gedit /etc/NetworkManager/NetworkManager.conf, I changed managed=false to managed=true. Then sudo service network-manager restart: no help: network is unreachable sudo pkill -9 NetworkManager: no help gksudo gedit /etc/resolve.conf added line nameseriver 8.8.8.8: no help I know very little about networking; to date this has simply worked. Thanks for your help! :- Doug.

  Read the article

• MVVM Light Toolkit throws an System.IO.FileLoadException

  - by joebeazelman

  I'm running VS 2010 along with Expression Blend 4 beta. I created a MVVM Light project from the supplied templates and I get a System.IO.FileLoadException when I try to view the MainWindow.Xaml in VS 2010 designer window. The template already references System.Windows.Interactivity. Here are the details of the exception: System.IO.FileLoadException Could not load file or assembly 'System.Windows.Interactivity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.Assembly.Load(AssemblyName assemblyRef) at MS.Internal.Package.VSIsolationProviderService.RemoteReferenceProxy.VsReflectionResolver.GetRuntimeAssembly(Assembly reflectionAssembly) at Microsoft.Windows.Design.Metadata.ReflectionMetadataContext.CachingReflectionResolver.GetRuntimeAssembly(Assembly reflectionAssembly) at Microsoft.Windows.Design.Metadata.ReflectionMetadataContext.Microsoft.Windows.Design.Metadata.IReflectionResolver.GetRuntimeAssembly(Assembly reflectionAssembly) at MS.Internal.Metadata.ClrAssembly.GetRuntimeMetadata(Object reflectionMetadata) at Microsoft.Windows.Design.Metadata.AttributeTableContainer.d_c.MoveNext() at Microsoft.Windows.Design.Metadata.AttributeTableContainer.GetAttributes(Assembly assembly, Type attributeType, Func`2 reflectionMapper) at MS.Internal.Metadata.ClrAssembly.GetAttributes(ITypeMetadata attributeType) at MS.Internal.Design.Metadata.Xaml.XamlAssembly.get_XmlNamespaceCompatibilityMappings() at Microsoft.Windows.Design.Metadata.Xaml.XamlExtensionImplementations.GetXmlNamespaceCompatibilityMappings(IAssemblyMetadata sourceAssembly) at Microsoft.Windows.Design.Metadata.Xaml.XamlExtensions.GetXmlNamespaceCompatibilityMappings(IAssemblyMetadata source) at MS.Internal.Design.Metadata.ReflectionProjectNode.BuildSubsumption() at MS.Internal.Design.Metadata.ReflectionProjectNode.SubsumingNamespace(Identifier identifier) at MS.Internal.Design.Markup.XmlElement.BuildScope(PrefixScope parentScope, IParseContext context) at MS.Internal.Design.Markup.XmlElement.ConvertToXaml(XamlElement parent, PrefixScope parentScope, IParseContext context, IMarkupSourceProvider provider) at MS.Internal.Design.DocumentModel.DocumentTrees.Markup.XamlSourceDocument.FullParse(Boolean convertToXamlWithErrors) at MS.Internal.Design.DocumentModel.DocumentTrees.Markup.XamlSourceDocument.get_RootItem() at Microsoft.Windows.Design.DocumentModel.Trees.ModifiableDocumentTree.get_ModifiableRootItem() at Microsoft.Windows.Design.DocumentModel.MarkupDocumentManagerBase.get_LoadState() at MS.Internal.Host.PersistenceSubsystem.Load() at MS.Internal.Host.Designer.Load() at MS.Internal.Designer.VSDesigner.Load() at MS.Internal.Designer.VSIsolatedDesigner.VSIsolatedView.Load() at MS.Internal.Designer.VSIsolatedDesigner.VSIsolatedDesignerFactory.Load(IsolatedView view) at MS.Internal.Host.Isolation.IsolatedDesigner.BootstrapProxy.LoadDesigner(IsolatedDesignerFactory factory, IsolatedView view) at MS.Internal.Host.Isolation.IsolatedDesigner.BootstrapProxy.LoadDesigner(IsolatedDesignerFactory factory, IsolatedView view) at MS.Internal.Host.Isolation.IsolatedDesigner.Load() at MS.Internal.Designer.DesignerPane.LoadDesignerView() System.NotSupportedException An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information.

  Read the article

• glassfish v3.0 hangs no app is ever deployed and no error is ever shown

  - by Samuel Lopez

  I have a web app that uses JSF 2.0 with richFaces and primeFaces, hibernate and java and I use NetBeans 7.1.2 as the IDE when I run the app the glassfish server is started and the log shows this: Launching GlassFish on Felix platform Información: Running GlassFish Version: GlassFish Server Open Source Edition 3.1.2 (build 23) Información: Grizzly Framework 1.9.46 started in: 20ms - bound to [0.0.0.0:4848] Información: Grizzly Framework 1.9.46 started in: 32ms - bound to [0.0.0.0:8181] Información: Grizzly Framework 1.9.46 started in: 59ms - bound to [0.0.0.0:8080] Información: Grizzly Framework 1.9.46 started in: 32ms - bound to [0.0.0.0:3700] Información: Grizzly Framework 1.9.46 started in: 21ms - bound to [0.0.0.0:7676] Información: Registered org.glassfish.ha.store.adapter.cache.ShoalBackingStoreProxy for persistence-type = replicated in BackingStoreFactoryRegistry Información: SEC1002: Security Manager is OFF. Información: SEC1010: Entering Security Startup Service Información: SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper. Información: SEC1115: Realm [admin-realm] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created. Información: SEC1115: Realm [file] of classtype [com.sun.enterprise.security.auth.realm.file.FileRealm] successfully created. Información: SEC1115: Realm [certificate] of classtype [com.sun.enterprise.security.auth.realm.certificate.CertificateRealm] successfully created. Información: SEC1011: Security Service(s) Started Successfully Información: WEB0169: Created HTTP listener [http-listener-1] on host/port [0.0.0.0:8080] Información: WEB0169: Created HTTP listener [http-listener-2] on host/port [0.0.0.0:8181] Información: WEB0169: Created HTTP listener [admin-listener] on host/port [0.0.0.0:4848] Información: WEB0171: Created virtual server [server] Información: WEB0171: Created virtual server [__asadmin] Información: WEB0172: Virtual server [server] loaded default web module [] Información: Inicializando Mojarra 2.1.6 (SNAPSHOT 20111206) para el contexto '/test' Información: Hibernate Validator 4.2.0.Final Información: WEB0671: Loading application [test] at [/test] Información: CORE10010: Loading application test done in 4,885 ms Información: GlassFish Server Open Source Edition 3.1.2 (23) startup time : Felix (1,848ms), startup services(5,600ms), total(7,448ms) Información: JMX005: JMXStartupService had Started JMXConnector on JMXService URL service:jmx:rmi://SJ007:8686/jndi/rmi://SJ007:8686/jmxrmi Información: WEB0169: Created HTTP listener [http-listener-1] on host/port [0.0.0.0:8080] Información: Grizzly Framework 1.9.46 started in: 14ms - bound to [0.0.0.0:8080] Información: WEB0169: Created HTTP listener [http-listener-2] on host/port [0.0.0.0:8181] Información: Grizzly Framework 1.9.46 started in: 12ms - bound to [0.0.0.0:8181] but right there it hangs and the deploy bar keeps running but no more actions are shown, nothing else is logged either it just stays there until I stop the deploy Is there any other error log to debug glassfish server? Any thoughts? I have re installed glassfish and NetBeans but it all seems the same. I think this started happening after I had to force-restart my computer with NetBeans stil open and the app deployed, but it's hard to know for sure if this was the real catalyst. Any thoughts or help is appreciated thanks. Is it an app error? if so why no errors in the log are shown?

  Read the article

• H12 timeout error on Heroku

  - by snowangel

  Can anyone shed some light on what's causing this timeout error on Heroku (at 2012-07-08T08:58:33+00:00)? The docs say that it's because of some long running process. I've set config.assets.initialize_on_precompile = false in config/application.rb. EmBP-2:bc Emma$ heroku restart Restarting processes... done EmBP-2:bc Emma$ heroku logs --tail 2012-07-08T08:47:21+00:00 heroku[nginx]: 82.69.50.215 - - [08/Jul/2012:08:47:21 +0000] "GET /assets/application.js HTTP/1.1" 200 311723 "https://codicology.co.uk/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:47:21+00:00 heroku[nginx]: 127.0.0.1 - - [08/Jul/2012:08:47:21 +0000] "GET /assets/application.js HTTP/1.0" 200 1311615 "https://codicology.co.uk/" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:51:32+00:00 heroku[slugc]: Slug compilation started 2012-07-08T08:54:05+00:00 heroku[api]: Release v145 created by [email protected] 2012-07-08T08:54:05+00:00 heroku[api]: Deploy 8814b2f by [email protected] 2012-07-08T08:54:05+00:00 heroku[web.1]: State changed from up to starting 2012-07-08T08:54:06+00:00 heroku[slugc]: Slug compilation finished 2012-07-08T08:54:09+00:00 heroku[web.1]: Stopping all processes with SIGTERM 2012-07-08T08:54:09+00:00 heroku[worker.1]: Stopping all processes with SIGTERM 2012-07-08T08:54:09+00:00 heroku[web.1]: Starting process with command `bundle exec unicorn -p 22429 -c ./config/unicorn.rb` 2012-07-08T08:54:10+00:00 app[worker.1]: [Worker(host:2046e0bf-e109-40f2-abdb-10f69d224483 pid:1)] Exiting... 2012-07-08T08:54:11+00:00 app[web.1]: I, [2012-07-08T08:54:11.320616 #1] INFO -- : reaped #<Process::Status: pid 8 exit 0> worker=1 2012-07-08T08:54:11+00:00 app[web.1]: I, [2012-07-08T08:54:11.376765 #1] INFO -- : master complete 2012-07-08T08:54:11+00:00 app[web.1]: I, [2012-07-08T08:54:11.376272 #1] INFO -- : reaped #<Process::Status: pid 5 exit 0> worker=0 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.011695 #1] INFO -- : worker=0 spawning... 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.011386 #1] INFO -- : listening on addr=0.0.0.0:22429 fd=3 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.017917 #5] INFO -- : worker=0 spawned pid=5 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.019309 #1] INFO -- : master process ready 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.018250 #5] INFO -- : Refreshing Gem list 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.016768 #1] INFO -- : worker=1 spawning... 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.020863 #8] INFO -- : Refreshing Gem list 2012-07-08T08:54:12+00:00 app[web.1]: I, [2012-07-08T08:54:12.020617 #8] INFO -- : worker=1 spawned pid=8 2012-07-08T08:54:12+00:00 app[worker.1]: SQL (2.9ms) UPDATE "delayed_jobs" SET locked_by = null, locked_at = null WHERE (locked_by = 'host:2046e0bf-e109-40f2-abdb-10f69d224483 pid:1') 2012-07-08T08:54:12+00:00 heroku[web.1]: Process exited with status 0 2012-07-08T08:54:13+00:00 heroku[web.1]: State changed from starting to up 2012-07-08T08:54:14+00:00 heroku[worker.1]: Process exited with status 0 2012-07-08T08:54:14+00:00 heroku[worker.1]: State changed from up to down 2012-07-08T08:54:14+00:00 heroku[worker.1]: State changed from down to starting 2012-07-08T08:54:20+00:00 heroku[worker.1]: Starting process with command `bundle exec rake jobs:work` 2012-07-08T08:54:20+00:00 heroku[worker.1]: State changed from starting to up 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:28+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:54:33+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:54:33+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:54:33+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:54:33+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:54:34+00:00 app[web.1]: 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:34+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:54:41+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:54:41+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:54:45+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:54:46+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:54:47+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:54:48+00:00 app[web.1]: I, [2012-07-08T08:54:48.467693 #8] INFO -- : worker=1 ready 2012-07-08T08:54:48+00:00 app[web.1]: I, [2012-07-08T08:54:48.823800 #5] INFO -- : worker=0 ready 2012-07-08T08:54:48+00:00 app[worker.1]: Starting the New Relic Agent. 2012-07-08T08:54:48+00:00 app[worker.1]: New Relic Agent not running. 2012-07-08T08:54:48+00:00 app[worker.1]: [Worker(host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1)] New Relic Ruby Agent Monitoring DJ worker host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1 2012-07-08T08:54:48+00:00 app[worker.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:54:49+00:00 app[worker.1]: [Worker(host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1)] Starting job worker 2012-07-08T08:57:54+00:00 heroku[web.1]: State changed from up to starting 2012-07-08T08:57:56+00:00 heroku[web.1]: Stopping all processes with SIGTERM 2012-07-08T08:57:57+00:00 app[web.1]: I, [2012-07-08T08:57:57.047386 #1] INFO -- : reaped #<Process::Status: pid 5 exit 0> worker=0 2012-07-08T08:57:57+00:00 app[web.1]: I, [2012-07-08T08:57:57.047753 #1] INFO -- : reaped #<Process::Status: pid 8 exit 0> worker=1 2012-07-08T08:57:57+00:00 app[web.1]: I, [2012-07-08T08:57:57.047999 #1] INFO -- : master complete 2012-07-08T08:57:57+00:00 heroku[worker.1]: Stopping all processes with SIGTERM 2012-07-08T08:57:58+00:00 heroku[web.1]: Process exited with status 0 2012-07-08T08:57:58+00:00 app[worker.1]: [Worker(host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1)] Exiting... 2012-07-08T08:57:59+00:00 heroku[web.1]: Starting process with command `bundle exec unicorn -p 29766 -c ./config/unicorn.rb` 2012-07-08T08:58:01+00:00 app[worker.1]: SQL (27.9ms) UPDATE "delayed_jobs" SET locked_by = null, locked_at = null WHERE (locked_by = 'host:1eabe514-7ec9-43b0-835b-ff3bd23bc266 pid:1') 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.070527 #1] INFO -- : listening on addr=0.0.0.0:29766 fd=3 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.070782 #1] INFO -- : worker=0 spawning... 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.074498 #1] INFO -- : worker=1 spawning... 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.075702 #1] INFO -- : master process ready 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.076732 #5] INFO -- : worker=0 spawned pid=5 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.076957 #5] INFO -- : Refreshing Gem list 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.089022 #8] INFO -- : worker=1 spawned pid=8 2012-07-08T08:58:02+00:00 app[web.1]: I, [2012-07-08T08:58:02.089299 #8] INFO -- : Refreshing Gem list 2012-07-08T08:58:02+00:00 heroku[worker.1]: Process exited with status 0 2012-07-08T08:58:02+00:00 heroku[worker.1]: State changed from up to down 2012-07-08T08:58:02+00:00 heroku[worker.1]: State changed from down to starting 2012-07-08T08:58:02+00:00 heroku[web.1]: State changed from starting to up 2012-07-08T08:58:10+00:00 heroku[worker.1]: Starting process with command `bundle exec rake jobs:work` 2012-07-08T08:58:11+00:00 heroku[worker.1]: State changed from starting to up 2012-07-08T08:58:28+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:58:28+00:00 app[worker.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/Rakefile:10) 2012-07-08T08:58:33+00:00 heroku[router]: Error H12 (Request timeout) -> GET codicology.co.uk/ dyno=web.1 queue= wait= service=30000ms status=503 bytes=0 2012-07-08T08:58:33+00:00 heroku[nginx]: 127.0.0.1 - - [08/Jul/2012:08:58:33 +0000] "GET / HTTP/1.0" 503 601 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:58:33+00:00 heroku[nginx]: 82.69.50.215 - - [08/Jul/2012:08:58:33 +0000] "GET / HTTP/1.1" 503 601 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7" codicology.co.uk 2012-07-08T08:58:42+00:00 app[worker.1]: New Relic Agent not running. 2012-07-08T08:58:42+00:00 app[worker.1]: [Worker(host:b5fa9243-6f9b-4de4-8f64-adab767fe4b0 pid:1)] New Relic Ruby Agent Monitoring DJ worker host:b5fa9243-6f9b-4de4-8f64-adab767fe4b0 pid:1 2012-07-08T08:58:42+00:00 app[worker.1]: Starting the New Relic Agent. 2012-07-08T08:58:42+00:00 app[worker.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:58:43+00:00 app[worker.1]: [Worker(host:b5fa9243-6f9b-4de4-8f64-adab767fe4b0 pid:1)] Starting job worker 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:58:56+00:00 app[web.1]: DEPRECATION WARNING: You have Rails 2.3-style plugins in vendor/plugins! Support for these plugins will be removed in Rails 4.0. Move them out and bundle them in your Gemfile, or fold them in to your app as lib/myplugin/* and config/initializers/myplugin.rb. See the release notes for more on this: http://weblog.rubyonrails.org/2012/1/4/rails-3-2-0-rc2-has-been-released. (called from <top (required)> at /app/config/environment.rb:6) 2012-07-08T08:59:02+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:59:02+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:59:02+00:00 app[web.1]: Starting the New Relic Agent. 2012-07-08T08:59:02+00:00 app[web.1]: Installed New Relic Browser Monitoring middleware 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:03+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:03+00:00 app[web.1]: [DEVISE] Devise.use_salt_as_remember_token is deprecated and has no effect. Please remove it. 2012-07-08T08:59:03+00:00 app[web.1]: 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant XLSX 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:04+00:00 app[web.1]: /app/vendor/bundle/ruby/1.9.1/gems/actionpack-3.2.3/lib/action_dispatch/http/mime_type.rb:102: warning: already initialized constant PDF 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:59:22+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importadvancecsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpaymentcsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importpurchasecsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Importsalecsv class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for csv with :s3_eu_url. This will clash with attachment defined in Profitarchive class 2012-07-08T08:59:23+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:59:24+00:00 app[web.1]: [paperclip] Duplicate URL for xml with :s3_eu_url. This will clash with attachment defined in Onixarchive class 2012-07-08T08:59:25+00:00 app[web.1]: I, [2012-07-08T08:59:25.555052 #5] INFO -- : worker=0 ready 2012-07-08T08:59:25+00:00 app[web.1]: 2012-07-08T08:59:25+00:00 app[web.1]: 2012-07-08T08:59:25+00:00 app[web.1]: Started GET "/" for 82.69.50.215 at 2012-07-08 08:59:25 +0000 2012-07-08T08:59:26+00:00 app[web.1]: Processing by PagesController#home as HTML 2012-07-08T08:59:26+00:00 app[web.1]: I, [2012-07-08T08:59:26.043501 #8] INFO -- : worker=1 ready 2012-07-08T08:59:26+00:00 app[web.1]: Rendered pages/home.html.haml within layouts/application (5.7ms) 2012-07-08T08:59:26+00:00 app[web.1]: (1.1ms) SELECT COUNT(*) FROM "delayed_jobs" 2012-07-08T08:59:26+00:00 app[web.1]: Rendered layouts/_header.html.erb (4.2ms) 2012-07-08T08:59:26+00:00 app[web.1]: Rendered layouts/_footer.html.haml (1.4ms) 2012-07-08T08:59:26+00:00 app[web.1]: Completed 200 OK in 326ms (Views: 258.4ms | ActiveRecord: 65.2ms)

  Read the article

• ASP.NET: Large number of Session_Start with same session id

  - by Jaap

  I'm running a ASP.NET website on my development box (.NET 2.0 on Vista/IIS7). The Session_Start method in global.asax.cs logs every call to a file (log4net). The Session_End method also logs every call. I'm using InProc session state, and set the session timeout to 5 mins (to avoid waiting for 20 mins). I hit the website, wait for 5 minutes unit I see the Session_End logging. Then I F5 the website. The browsers still has the session cookie and sends it to the server. Session_Start is called and a new session is created using the same session id (btw: I need this to be the same session id, because it is used to store data in database). Result: Every time I hit F5 on a previously ended session, the Session_Start method is called. When I open a different browser, the Session_Start method is called just once. Then after 5 minutes the Session_End each F5 causes the Session_Start method to execute. Can anyone explain why this is happening? Update: After the Session timeout, all subsequent requests have a session start & session end. So in the end my question is: why are the sessions on these subsequent request closed immediatly? 2010-02-09 14:49:08,754 INFO Global.asax[7486] [(null)] - Session started. SID=nzponumvf1hbaniverffp4mq host=127.0.0.1 2010-02-09 14:49:08,754 INFO Global.asax[7486] [nzponumvf1hbaniverffp4mq] - Request start: GET http://localhost:80/js/settings.js 2010-02-09 14:49:08,756 INFO Global.asax[7486] [(null)] - Session ended. SID=nzponumvf1hbaniverffp4mq 2010-02-09 14:49:08,760 INFO Global.asax[7486] [(null)] - Session started. SID=nzponumvf1hbaniverffp4mq host=127.0.0.1 2010-02-09 14:49:08,760 INFO Global.asax[7486] [nzponumvf1hbaniverffp4mq] - Request start: GET /css/package.aspx?name=core 2010-02-09 14:49:08,761 INFO Global.asax[7486] [(null)] - Session ended. SID=nzponumvf1hbaniverffp4mq 2010-02-09 14:49:08,762 INFO Global.asax[7486] [(null)] - Session started. SID=nzponumvf1hbaniverffp4mq host=127.0.0.1 2010-02-09 14:49:08,762 INFO Global.asax[7486] [nzponumvf1hbaniverffp4mq] - Request start: GET /js/package.aspx?name=all 2010-02-09 14:49:08,763 INFO Global.asax[7486] [(null)] - Session ended. SID=nzponumvf1hbaniverffp4mq 2010-02-09 14:49:08,763 INFO Global.asax[7486] [(null)] - Session started. SID=nzponumvf1hbaniverffp4mq host=127.0.0.1 2010-02-09 14:49:08,763 INFO Global.asax[7486] [nzponumvf1hbaniverffp4mq] - Request start: GET /css/package.aspx?name=rest 2010-02-09 14:49:08,764 INFO Global.asax[7486] [(null)] - Session ended. SID=nzponumvf1hbaniverffp4mq 2010-02-09 14:49:08,764 INFO Global.asax[7486] [(null)] - Session started. SID=nzponumvf1hbaniverffp4mq host=127.0.0.1 2010-02-09 14:49:08,765 INFO Global.asax[7486] [nzponumvf1hbaniverffp4mq] - Request start: GET /css/package.aspx?name=vacation 2010-02-09 14:49:08,765 INFO Global.asax[7486] [(null)] - Session ended. SID=nzponumvf1hbaniverffp4mq web.config relevant section: <system.web> <compilation debug="true" /> <sessionState timeout="2" regenerateExpiredSessionId="false" /> </system.web>

  Read the article

• Strange behavior with Powershell scriptblock variable scope and modules, any suggestions?

  - by DanMan

  NOTE: I'm using PowerShell 2.0 on Windows Vista. I'm trying to add support for specifying build arguments to psake, but I've run into some strange PowerShell variable scoping behavior dealing specifically with calling functions that have been exported using Export-ModuleMember (which is how psake exposes it's main method). Following is a simple PowerShell module to illustrate (named repoCase.psm1): function Test { param( [Parameter(Position=0,Mandatory=0)] [scriptblock]$properties = {} ) $defaults = {$message = "Hello, world!"} Write-Host "Before running defaults, message is: $message" . $defaults #At this point, $message is correctly set to "Hellow, world!" Write-Host "Aftering running defaults, message is: $message" . $properties #At this point, I would expect $message to be set to whatever is passed in, #which in this case is "Hello from poperties!", but it isn't. Write-Host "Aftering running properties, message is: $message" } Export-ModuleMember -Function "Test" To test the module, run the following sequence of commands (be sure you're in the same directory as the repoCase.psm1): Import-Module .\repoCase.psm1 #Note that $message should be null Write-Host "Before execution - In global scope, message is: $message" Test -properties { "Executing properties, message is $message"; $message = "Hello from properties!"; } #Now $message is set to the value from the script block. The script block affected only the global scope. Write-Host "After execution - In global scope, message is: $message" Remove-Module repoCase The behavior I expected was for the script block I passed to Test to affect the local scope of Test. It is being 'dotsourced' in, so any changes it makes should be within the scope of the caller. However, that's not what's happening, it seems to be affecting the scope of where it was declared. Here's the output: Before execution - In global scope, message is: Before running defaults, message is: Aftering running defaults, message is: Hello, world! Executing properties, message is Aftering running properties, message is: Hello, world! After execution - In global scope, message is: Hello from properties! Interestingly, if I don't export Test as a module and instead just declare the function and invoke it, everything works just like I would expect it to. The script block affects only Test's scope, and does not modify the global scope. I'm not a PowerShell guru, but can someone explain this behavior to me?

  Read the article

• C socket programming: connect() hangs

  - by Fantastic Fourier

  Hey all, I'm about to rip my hair out. I have this client that tries to connect to a server, everything seems to be fine, using gethostbyname(), socket(), bind(), but when trying toconnect()` it just hangs there and the server doesn't see anything from the client. I know that the server works because another client (also in C) can connect just fine. What causes the server to not see this incoming connection? I'm at the end of my wits here. The two different clients are pretty similar too so I'm even more lost. if (argc == 2) { host = argv[1]; // server address } else { printf("plz read the manual\n"); exit(1); } hserver = gethostbyname(host); if (hserver) { printf("host found: %p\n", hserver); printf("host found: %s\n", hserver->h_name ); } else { printf("host not found\n"); exit(1); } bzero((char * ) &server_address, sizeof(server_address)); // copy zeroes into string server_address.sin_family = AF_INET; server_address.sin_addr.s_addr = htonl(hserver->h_addr); server_address.sin_port = htons(SERVER_PORT); bzero((char * ) &client_address, sizeof(client_address)); // copy zeroes into string client_address.sin_family = AF_INET; client_address.sin_addr.s_addr = htonl(INADDR_ANY); client_address.sin_port = htons(SERVER_PORT); sockfd = socket(AF_INET, SOCK_STREAM, 0); if (sockfd < 0) exit(1); else { printf("socket is opened: %i \n", sockfd); info.sock_fd = sockfd; rv = fcntl(sockfd, F_SETFL, O_NONBLOCK); // socket set to NONBLOCK if(rv < 0) printf("nonblock failed: %i %s\n", errno, strerror(errno)); else printf("socket is set nonblock\n"); } timeout.tv_sec = 0; // seconds timeout.tv_usec = 500000; // micro seconds ( 0.5 seconds) setsockopt(sockfd, SOL_SOCKET, SO_RCVTIMEO, &timeout, sizeof(struct timeval)); rv = bind(sockfd, (struct sockaddr *) &client_address, sizeof(client_address)); if (rv < 0) { printf("MAIN: ERROR bind() %i: %s\n", errno, strerror(errno)); exit(1); } else printf("socket is bound\n"); rv = connect(sockfd, (struct sockaddr *) &server_address, sizeof(server_address)); printf("rv = %i\n", rv); if (rv < 0) { printf("MAIN: ERROR connect() %i: %s\n", errno, strerror(errno)); exit(1); } else printf("connected\n"); Any thoughts or insights are deeply greatly humongously appreciated. -Fourier

  Read the article

• Send Mail through Jsp page.

  - by sourabhtaletiya

  hi friends ,i have tried alot to send mail via jsp page but i am not succeded. A error is coming javax.servlet.ServletException: 530 5.7.0 Must issue a STARTTLS command first. x1sm5029316wbx.19 <html> <head> <title>JSP JavaMail Example </title> </head> <body> <%@ page import="java.util.*" %> <%@ page import="javax.mail.*" %> <%@ page import="javax.mail.internet.*" %> <%@ page import="javax.activation.*" %> <% java.security.Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider()); Properties props = System.getProperties(); props.put("mail.smtp.starttls.enable","true"); props.put("mail.smtp.starttls.required","true"); String host = "smtp.gmail.com"; String to = request.getParameter("to"); String from = request.getParameter("from"); String subject = request.getParameter("subject"); String messageText = request.getParameter("body"); boolean sessionDebug = false; props.put("mail.smtp.host", "smtp.gmail.com"); props.put("mail.transport.protocol", "smtp"); props.put("mail.smtp.port", "25"); props.put("mail.smtp.auth", "true"); props.put("mail.debug", "true"); props.put("mail.smtp.socketFactory.port","25"); props.put("mail.smtp.starttls.enable","true"); Session mailSession = Session.getDefaultInstance(props, null); mailSession.setDebug(sessionDebug); Message msg = new MimeMessage(mailSession); props.put("mail.smtp.starttls.enable","true"); msg.setFrom(new InternetAddress(from)); InternetAddress[] address = {new InternetAddress(to)}; msg.setRecipients(Message.RecipientType.TO, address); msg.setSubject(subject); msg.setSentDate(new Date()); msg.setText(messageText); props.put("mail.smtp.starttls.enable","true"); Transport tr = mailSession.getTransport("smtp"); tr.connect(host, "sourabh.web7", "june251989"); msg.saveChanges(); // don't forget this props.put("mail.smtp.starttls.enable","true"); tr.sendMessage(msg, msg.getAllRecipients()); tr.close(); // Transport.send(msg); /* out.println("Mail was sent to " + to); out.println(" from " + from); out.println(" using host " + host + ".");*/ %> </table> </body> </html>

  Read the article

• PC hangs and reboots from time to time

  - by Bevor

  Hello, I have a very strange problem: Since I have my new PC, I have always had problems with it. From time to time the computer freezes for some seconds and suddendly reboots by itself. I've had this problem since Ubuntu 9.10. The same with 10.04 and 10.10. That's why I don't think it's a software failure because the problem persist too long. It doesn't have anything to do with what I'm doing at this time. Sometimes I listen to music, sometimes I only use Firefox, sometimes I'm running 2 or 3 VMs, sometimes I watch DVD. So it's not isolatable. I could freeze once a day or once a week. I put the PC to the vendor twice(!). The first time they changed my power supply but the problem persisted. The second time they told me that they made some heavy performance tests 50 hours long but they didn't find anything. (How can that be that I have daily freezes with normal usage). The vendor didn't check the hard discs because they used their own disc with Windows. (So they never checked the Linux installation). Yesterday I made some intensive hard disc scans with "SMART" but no errors were found. I ran memtest for 3 times but no errors found. I already had this problem in my old flat, so I doubt that I has something to do with current fluctuation. I already tried another electrical socket and changed to connector strip but the problem persists. At the moment I removed 2 of the RAMs (2x 2GB). In all I have 6GB, 2x2GB and 2x1GB. Could this difference maybe be a problem? Here is a list of my components. I hope that anybody find something I didn't think about yet. And here a list of my components: 1x AMD Phenom II X4 965 Black Edition, 3,4Ghz, Quad Core, S-AM3, Boxed 2x DDR3-RAM 2048MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x DDR3-RAM 1024MB, PC3-1333 Mhz, CL9, Kingston ValueRAM 2x SATA II Seagate Barracuda 7200.12, 1TB 32MB Cache = RAID 1 1x DVD ROM SATA LG DH16NSR, 16x/52x 1x DVD-+R/-+RW SATA LG GH-22NS50 1x Cardreader 18in1 1x PCI-E 2.0 GeForce GTS 250, Retail, 1024MB 1x Power Supply ATX 400 Watt, CHIEFTEC APS-400S, 80 Plus 1x Network card PCI Intel PRO/1000GT 10/100/1000 MBit 1x Mainboard Socket-AM3 ASUS M4A79XTD EVO, ATX lshw: description: Desktop Computer product: System Product Name vendor: System manufacturer version: System Version serial: System Serial Number width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop uuid=80E4001E-8C00-002C-AA59-E0CB4EBAC29A *-core description: Motherboard product: M4A79XTD EVO vendor: ASUSTeK Computer INC. physical id: 0 version: Rev X.0X serial: MT709CK11101196 slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 0704 (11/25/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Phenom(tm) II X4 965 Processor vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: AMD Phenom(tm) II X4 965 Processor serial: To Be Filled By O.E.M. slot: AM3 size: 800MHz capacity: 3400MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 512KiB capacity: 512KiB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 2MiB capacity: 2MiB capabilities: pipeline-burst internal varies unified *-cache:2 description: L3 cache physical id: 7 slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: pipeline-burst internal varies unified *-memory description: System Memory physical id: 36 slot: System board or motherboard size: 2GiB *-bank:0 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM Synchronous 1333 MHz (0.8 ns) product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 size: 1GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: DIMM [empty] product: ModulePartNumber02 vendor: Manufacturer02 physical id: 2 serial: SerNum02 slot: DIMM2 *-bank:3 description: DIMM [empty] product: ModulePartNumber03 vendor: Manufacturer03 physical id: 3 serial: SerNum03 slot: DIMM3 *-pci:0 description: Host bridge product: RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part vendor: ATI Technologies Inc physical id: 100 bus info: pci@0000:00:00.0 version: 00 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RD790 PCI to PCI bridge (external gfx0 port A) vendor: ATI Technologies Inc physical id: 2 bus info: pci@0000:00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:a000(size=4096) memory:f8000000-fbbfffff ioport:d0000000(size=268435456) *-display description: VGA compatible controller product: G92 [GeForce GTS 250] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:ac00(size=128) memory:fbbe0000-fbbfffff *-pci:1 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port C) vendor: ATI Technologies Inc physical id: 6 bus info: pci@0000:00:06.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:b000(size=4096) memory:fbc00000-fbcfffff ioport:f6f00000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 03 serial: e0:cb:4e:ba:c2:9a size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:45 ioport:b800(size=256) memory:f6fff000-f6ffffff memory:f6ff8000-f6ffbfff memory:fbcf0000-fbcfffff *-pci:2 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port D) vendor: ATI Technologies Inc physical id: 7 bus info: pci@0000:00:07.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:c000(size=4096) memory:fbd00000-fbdfffff *-firewire description: FireWire (IEEE 1394) product: VT6315 Series Firewire Controller vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:03:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress ohci bus_master cap_list configuration: driver=firewire_ohci latency=0 resources: irq:19 memory:fbdff800-fbdfffff ioport:c800(size=256) *-pci:3 description: PCI bridge product: RD790 PCI to PCI bridge (PCI express gpp port E) vendor: ATI Technologies Inc physical id: 9 bus info: pci@0000:00:09.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:d000(size=4096) memory:fbe00000-fbefffff *-ide description: IDE interface product: 88SE6121 SATA II Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 version: b2 width: 32 bits clock: 33MHz capabilities: ide pm msi pciexpress bus_master cap_list configuration: driver=pata_marvell latency=0 resources: irq:17 ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16) memory:fbeffc00-fbefffff *-storage description: SATA controller product: SB700/SB800 SATA Controller [IDE mode] vendor: ATI Technologies Inc physical id: 11 bus info: pci@0000:00:11.0 logical name: scsi0 logical name: scsi2 version: 00 width: 32 bits clock: 66MHz capabilities: storage msi ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=64 resources: irq:44 ioport:9000(size=8) ioport:8000(size=4) ioport:7000(size=8) ioport:6000(size=4) ioport:5000(size=16) memory:f7fffc00-f7ffffff *-disk:0 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: CC38 serial: 9VP3WD9Z size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-disk:1 description: ATA Disk product: ST31000528AS vendor: Seagate physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/sdb version: CC38 serial: 9VP3SCPF size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000ad206 *-volume:0 UNCLAIMED description: Linux filesystem partition vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 version: 1.0 serial: 81839235-21ea-4853-90a4-814779f49000 size: 972MiB capacity: 972MiB capabilities: primary ext2 initialized configuration: filesystem=ext2 modified=2010-12-06 18:32:58 mounted=2010-11-01 07:05:10 state=unknown *-volume:1 UNCLAIMED description: Linux swap volume physical id: 2 bus info: scsi@2:0.0.0,2 version: 1 serial: 22b881d5-6f5c-484d-94e8-e231896fa91b size: 486MiB capacity: 486MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-volume:2 UNCLAIMED description: EXT3 volume vendor: Linux physical id: 3 bus info: scsi@2:0.0.0,3 version: 1.0 serial: ad5b0daf-11e8-4f8f-8598-4e89da9c0d84 size: 47GiB capacity: 47GiB capabilities: primary journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-16 20:42:29 filesystem=ext3 modified=2010-11-29 17:02:34 mounted=2010-12-06 18:32:50 state=clean *-volume:3 UNCLAIMED description: Extended partition physical id: 4 bus info: scsi@2:0.0.0,4 size: 882GiB capacity: 882GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume UNCLAIMED description: Linux filesystem partition physical id: 5 capacity: 882GiB *-usb:0 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 12 bus info: pci@0000:00:12.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffd000-f7ffdfff *-usb:1 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 12.1 bus info: pci@0000:00:12.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:16 memory:f7ffe000-f7ffefff *-usb:2 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 12.2 bus info: pci@0000:00:12.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:17 memory:f7fff800-f7fff8ff *-usb:3 description: USB Controller product: SB700/SB800 USB OHCI0 Controller vendor: ATI Technologies Inc physical id: 13 bus info: pci@0000:00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffb000-f7ffbfff *-usb:4 description: USB Controller product: SB700 USB OHCI1 Controller vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@0000:00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffc000-f7ffcfff *-usb:5 description: USB Controller product: SB700/SB800 USB EHCI Controller vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@0000:00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=64 resources: irq:19 memory:f7fff400-f7fff4ff *-serial UNCLAIMED description: SMBus product: SBx00 SMBus Controller vendor: ATI Technologies Inc physical id: 14 bus info: pci@0000:00:14.0 version: 3c width: 32 bits clock: 66MHz capabilities: ht cap_list configuration: latency=0 *-ide description: IDE interface product: SB700/SB800 IDE Controller vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@0000:00:14.1 logical name: scsi5 version: 00 width: 32 bits clock: 66MHz capabilities: ide msi bus_master cap_list emulated configuration: driver=pata_atiixp latency=64 resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16) *-cdrom:0 description: DVD reader product: DVDROM DH16NS30 vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom1 logical name: /dev/dvd1 logical name: /dev/scd0 logical name: /dev/sr0 version: 1.00 capabilities: removable audio dvd configuration: ansiversion=5 status=nodisc *-cdrom:1 description: DVD-RAM writer product: DVDRAM GH22NS50 vendor: HL-DT-ST physical id: 0.1.0 bus info: scsi@5:0.1.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd1 logical name: /dev/sr1 version: TN02 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=64 resources: irq:16 memory:f7ff4000-f7ff7fff *-isa description: ISA bridge product: SB700/SB800 LPC host controller vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@0000:00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master configuration: latency=0 *-pci:4 description: PCI bridge product: SBx00 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@0000:00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master resources: ioport:e000(size=4096) memory:fbf00000-fbffffff *-network description: Ethernet interface product: 82541PI Gigabit Ethernet Controller vendor: Intel Corporation physical id: 5 bus info: pci@0000:05:05.0 logical name: eth1 version: 05 serial: 00:1b:21:56:f3:60 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=64 link=yes mingnt=255 multicast=yes port=twisted pair speed=100MB/s resources: irq:20 memory:fbfe0000-fbffffff memory:fbfc0000-fbfdffff ioport:ec00(size=64) memory:fbfa0000-fbfbffff *-usb:6 description: USB Controller product: SB700/SB800 USB OHCI2 Controller vendor: ATI Technologies Inc physical id: 14.5 bus info: pci@0000:00:14.5 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master configuration: driver=ohci_hcd latency=64 resources: irq:18 memory:f7ffa000-f7ffafff *-pci:1 description: Host bridge product: Family 10h Processor HyperTransport Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@0000:00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Family 10h Processor Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@0000:00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Family 10h Processor DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@0000:00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Family 10h Processor Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@0000:00:18.3 version: 00 width: 32 bits clock: 33MHz configuration: driver=k10temp resources: irq:0 *-pci:5 description: Host bridge product: Family 10h Processor Link Control vendor: Advanced Micro Devices [AMD] physical id: 105 bus info: pci@0000:00:18.4 version: 00 width: 32 bits clock: 33MHz *-scsi physical id: 1 bus info: usb@2:3 logical name: scsi8 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk:0 description: SCSI Disk physical id: 0.0.0 bus info: scsi@8:0.0.0 logical name: /dev/sdc *-disk:1 description: SCSI Disk physical id: 0.0.1 bus info: scsi@8:0.0.1 logical name: /dev/sdd *-disk:2 description: SCSI Disk physical id: 0.0.2 bus info: scsi@8:0.0.2 logical name: /dev/sde *-disk:3 description: SCSI Disk physical id: 0.0.3 bus info: scsi@8:0.0.3 logical name: /dev/sdf *-network DISABLED description: Ethernet interface physical id: 1 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

  Read the article

• 501 Error during Libjingle PCP on Amazone EC2 running Openfire

  - by AeroBuffalo

  I am trying to implement Google's Libjingle (version: 0.6.14) PCP example and I am getting a 501: feature not implemented error during execution. Specifically, the error occurs after each "account" has connected, been authenticated and began communicating with the other. An abbreviated log of the interaction is provided at the end. I have set up my own jabber server (using OpenFire on an Amazon EC2 server), have opened all of the necessary ports and have added each "account" to the other's roster. The server has been set to allow for file transfers. My being new to working with servers, I am not sure why this error is occur and how to go about fixing it. Thanks in advance, AeroBuffalo P.S. Let me know if there is any additional information needed (i.e. the full program log for either/both ends). Receiving End: [018:217] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [018:217] <iq to="[email protected]/pcp" type="set" id="5"> [018:217] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="402024303" initiator="[email protected]/pcp"> [018:217] <content name="securetunnel" creator="initiator"> [018:217] <description xmlns="http://www.google.com/talk/securetunnel"> [018:217] <type>send:winein.jpeg</type> [018:217] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:217] </description> [018:217] <transport xmlns="http://www.google.com/transport/p2p"/> [018:217] </content> [018:217] </jingle> [018:217] <session xmlns="http://www.google.com/session" type="initiate" id="402024303" initiator="[email protected]/pcp"> [018:217] <description xmlns="http://www.google.com/talk/securetunnel"> [018:217] <type>send:winein.jpeg</type> [018:217] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:217] </description></session> [018:217] </iq> [018:217] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:217] <presence to="[email protected]/pcp" from="forgesend" type="error"> [018:217] <error code="404" type="cancel"> [018:217] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [018:217] </error></presence> [018:218] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:218] <presence to="[email protected]/pcp" from="forgesend" type="error"> [018:218] <error code="404" type="cancel"> [018:218] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [018:218] </error></presence> [018:264] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:264] <iq type="result" id="3" to="[email protected]/pcp"> [018:264] <query xmlns="google:jingleinfo"> [018:264] <stun> [018:264] <server host="stun.xten.net" udp="3478"/> [018:264] <server host="jivesoftware.com" udp="3478"/> [018:264] <server host="igniterealtime.org" udp="3478"/> [018:264] <server host="stun.fwdnet.net" udp="3478"/> [018:264] </stun> [018:264] <publicip ip="65.101.207.121"/> [018:264] </query></iq> [018:420] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:420] <iq to="[email protected]/pcp" type="set" id="5" from="[email protected]/pcp"> [018:420] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="3548650675" initiator="[email protected]/pcp"> [018:420] <content name="securetunnel" creator="initiator"> [018:420] <description xmlns="http://www.google.com/talk/securetunnel"> [018:420] <type>recv:wineout.jpeg</type> [018:420] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:420] </description> [018:420] <transport xmlns="http://www.google.com/transport/p2p"/> [018:420] </content></jingle> [018:420] <session xmlns="http://www.google.com/session" type="initiate" id="3548650675" initiator="[email protected]/pcp"> [018:420] <description xmlns="http://www.google.com/talk/securetunnel"> [018:420] <type>recv:wineout.jpeg</type> [018:420] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [018:420] </description></session></iq> [018:421] TunnelSessionClientBase::OnSessionCreate: received=1 [018:421] Session:3548650675 Old state:STATE_INIT New state:STATE_RECEIVEDINITIATE Type:http://www.google.com/talk/securetunnel Transport:http://www.google.com/transport/p2p [018:421] TunnelSession::OnSessionState(Session::STATE_RECEIVEDINITIATE) [018:421] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [018:421] <iq to="[email protected]/pcp" id="5" type="result"/> [018:465] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [018:465] <iq to="[email protected]/pcp" id="5" type="result" from="[email protected]/pcp"/> [198:665] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:20:15 2012 [198:665] <iq type="get" id="162-10" from="forgejabber.com" to="[email protected]/pcp"> [198:665] <ping xmlns="urn:xmpp:ping"/> [198:665] /iq> [198:665] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:20:15 2012 [198:665] <iq type="error" id="162-10" to="forgejabber.com"> [198:665] <ping xmlns="urn:xmpp:ping"/> [198:665] <error code="501" type="cancel"> [198:665] <feature-not-implemented xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [198:665] </error> [198:665] </iq> Sender: [019:043] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [019:043] <iq type="get" id="3"> [019:043] <query xmlns="google:jingleinfo"/> [019:043] </iq> [019:043] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [019:043] <iq to="[email protected]/pcp" type="set" id="5"> [019:043] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="3548650675" initiator="[email protected]/pcp"> [019:043] <content name="securetunnel" creator="initiator"> [019:043] <description xmlns="http://www.google.com/talk/securetunnel"> [019:043] <type>recv:wineout.jpeg</type> [019:043] <client-cert>--BEGIN CERTIFICATE----END CERTIFICATE--</client-cert> [019:043] </description> [019:043] <transport xmlns="http://www.google.com/transport/p2p"/> [019:043] </content> [019:043] </jingle> [019:043] <session xmlns="http://www.google.com/session" type="initiate" id="3548650675" initiator="[email protected]/pcp"> [019:043] <description xmlns="http://www.google.com/talk/securetunnel"> [019:043] <type>recv:wineout.jpeg</type> [019:043] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [019:043] </description></session></iq> [019:043] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:043] <presence to="[email protected]/pcp" from="forgereceive" type="error"> [019:043] <error code="404" type="cancel"> [019:043] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [019:043] </error></presence> [019:044] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:044] <presence to="[email protected]/pcp" from="forgereceive" type="error"> [019:044] <error code="404" type="cancel"> [019:044] <remote-server-not-found xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [019:044] </error></presence> [019:044] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:044] <iq to="[email protected]/pcp" type="set" id="5" from="[email protected]/pcp"> [019:044] <jingle xmlns="urn:xmpp:jingle:1" action="session-initiate" sid="402024303" initiator="[email protected]/pcp"> [019:044] <content name="securetunnel" creator="initiator"> [019:044] <description xmlns="http://www.google.com/talk/securetunnel"> [019:044] <type>send:winein.jpeg</type> [019:044] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [019:044] </description> [019:044] <transport xmlns="http://www.google.com/transport/p2p"/> [019:044] </content></jingle> [019:044] <session xmlns="http://www.google.com/session" type="initiate" id="402024303" initiator="[email protected]/pcp"> [019:044] <description xmlns="http://www.google.com/talk/securetunnel"> [019:044] <type>send:winein.jpeg</type> [019:044] <client-cert>--BEGIN CERTIFICATE--END CERTIFICATE--</client-cert> [019:044] </description></session></iq> [019:044] TunnelSessionClientBase::OnSessionCreate: received=1 [019:044] Session:402024303 Old state:STATE_INIT New state:STATE_RECEIVEDINITIATE Type:http://www.google.com/talk/securetunnel Transport:http://www.google.com/transport/p2p [019:044] TunnelSession::OnSessionState(Session::STATE_RECEIVEDINITIATE) [019:044] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:17:15 2012 [019:044] <iq to="[email protected]/pcp" id="5" type="result"/> [019:088] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:088] <iq type="result" id="3" to="[email protected]/pcp"> [019:088] <query xmlns="google:jingleinfo"> [019:088] <stun> [019:088] <server host="stun.xten.net" udp="3478"/> [019:088] <server host="jivesoftware.com" udp="3478"/> [019:088] <server host="igniterealtime.org" udp="3478"/> [019:088] <server host="stun.fwdnet.net" udp="3478"/> [019:088] </stun> [019:088] <publicip ip="65.101.207.121"/> [019:088] </query> [019:088] </iq> [019:183] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:17:15 2012 [019:183] <iq to="[email protected]/pcp" id="5" type="result" from="[email protected]/pcp"/> [199:381] RECV <<<<<<<<<<<<<<<<<<<<<<<<< : Thu Jul 5 14:20:15 2012 [199:381] <iq type="get" id="474-11" from="forgejabber.com" to="[email protected]/pcp"> [199:381] <ping xmlns="urn:xmpp:ping"/> [199:381] </iq> [199:381] SEND >>>>>>>>>>>>>>>>>>>>>>>>> : Thu Jul 5 14:20:15 2012 [199:381] <iq type="error" id="474-11" to="forgejabber.com"> [199:381] <ping xmlns="urn:xmpp:ping"/> [199:381] <error code="501" type="cancel"> [199:381] <feature-not-implemented xmlns="urn:ietf:params:xml:ns:xmpp-stanzas"/> [199:382] </error></iq>

  Read the article

• OpenBSD configuration: Client unable to mount via NFS using Berkeley Automounter (amd)

  - by Rilindo

  What I am trying to do is to have my openBSD client (OpenBSD 4.9) auto mount a Linux NFS file system (Scientific Linux 6.1). So far, I am not sure if it is configured correctly. To get things out of the way, I am able to mount nfs manually: # mount_nfs -T -3 192.168.15.100:/exports /mnt # ls -la /mnt total 52 drwxr-xr-x 7 root wheel 4096 Oct 4 22:42 . drwxr-xr-x 16 root wheel 512 Nov 26 16:33 .. drwxrwxr-x 5 _sndio _sndio 4096 Oct 31 21:58 centos drwxr-xr-x 15 root wheel 4096 Nov 6 09:17 home drwxr-xr-x 5 root wheel 4096 Oct 31 21:27 sl drwxr-xr-x 3 root wheel 4096 Nov 19 16:02 sles drwxr-xr-x 17 503 503 4096 Nov 10 17:37 users # So connectivity is not an issue, as far as I can tell. As per man page, the following is configured in /etc/amd/auto.home: /defaults type:=nfs;sublink:=${key};opts:=rw,soft,intr,vers=3,proto=tcp * rhost:=192.168.15.100;rfs:=/exports In turn, /etc/amd/master is configured as such: # cat /etc/amd/master /exports amd.home Upon reboot, I can it see mount, but curiously enough, instead of the hostname: amd:24490 0 0 0 100% /exports From what I understand, amd acts a little different from FreeBSD. Still, I tried to see if I it can automount. Nope: ksh: cd: /exports/users - Resource temporarily unavailable # cd /exports/192.168.15.100/host/users ksh: cd: /exports/192.168.15.100/host/users - Resource temporarily unavailable A search in google doesn't help too much - it seems that automounting NFS with OpenBSD is not something that is usually done. Other than this, information is fairly sparse. I can, of course, always mount is permanently, but I tend to be a bit anal on convention, so no for now. :) Some direction would be appreciation. (And oh, in case you are a wondering, I tried FreeBSD way of using amd and that hasn't worked out - although I wouldn't mind an explanation of the difference between how FreeBSD implements and how OpenBSD implements it) UPDATE: After re-writing the map file several times, I got as far as actually communicating with the NFS server with this configuration: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport However, for some reason, it seems that amd will only default to NFS version 2 over udp: # tcpdump dst kerberos tcpdump: listening on pcn0, link-type EN10MB tcpdump: WARNING: compensating for unaligned libpcap packets 20:38:28.558385 openbsd.monzell.com.856 > kerberos.monzell.com.sunrpc: udp 100 20:38:28.559154 openbsd.monzell.com.856 > kerberos.monzell.com.892: udp 96 20:38:30.592761 openbsd.monzell.com.856 > kerberos.monzell.com.nfsd: xid 0x22000000 (NFSv2) 40 null 20:38:33.558107 arp reply openbsd.monzell.com is-at 52:54:00:52:8f:66 I tried various options of forcing it to try to mount as nfsv3 such as: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport or: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=-3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport Nothing yet still. Curious enough, OpenBSD mounts defaults to version 3, so I am not sure why it would start with version in amd. What would be the correct options to pass?

  Read the article

• OpenBSD configuration: Client unable to automount via NFS using amd

  - by Rilindo

  What I am trying to do is to have my openBSD client (OpenBSD 4.9) auto mount a Linux NFS file system (Scientific Linux 6.1). So far, I am not sure if it is configured correctly. To get things out of the way, I am able to mount nfs manually: # mount_nfs -T -3 192.168.15.100:/exports /mnt # ls -la /mnt total 52 drwxr-xr-x 7 root wheel 4096 Oct 4 22:42 . drwxr-xr-x 16 root wheel 512 Nov 26 16:33 .. drwxrwxr-x 5 _sndio _sndio 4096 Oct 31 21:58 centos drwxr-xr-x 15 root wheel 4096 Nov 6 09:17 home drwxr-xr-x 5 root wheel 4096 Oct 31 21:27 sl drwxr-xr-x 3 root wheel 4096 Nov 19 16:02 sles drwxr-xr-x 17 503 503 4096 Nov 10 17:37 users # So connectivity is not an issue, as far as I can tell. As per man page, the following is configured in /etc/amd/auto.home: /defaults type:=nfs;sublink:=${key};opts:=rw,soft,intr,vers=3,proto=tcp * rhost:=192.168.15.100;rfs:=/exports In turn, /etc/amd/master is configured as such: # cat /etc/amd/master /exports amd.home Upon reboot, I can it see mount, but curiously enough, instead of the hostname: amd:24490 0 0 0 100% /exports From what I understand, amd acts a little different from FreeBSD. Still, I tried to see if I it can automount. Nope: ksh: cd: /exports/users - Resource temporarily unavailable # cd /exports/192.168.15.100/host/users ksh: cd: /exports/192.168.15.100/host/users - Resource temporarily unavailable A search in google doesn't help too much - it seems that automounting NFS with OpenBSD is not something that is usually done. Other than this, information is fairly sparse. I can, of course, always mount is permanently, but I tend to be a bit anal on convention, so no for now. :) Some direction would be appreciation. (And oh, in case you are a wondering, I tried FreeBSD way of using amd and that hasn't worked out - although I wouldn't mind an explanation of the difference between how FreeBSD implements and how OpenBSD implements it) UPDATE: After re-writing the map file several times, I got as far as actually communicating with the NFS server with this configuration: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,tcp,resvport However, for some reason, it seems that amd will only default to NFS version 2 over udp: # tcpdump dst kerberos tcpdump: listening on pcn0, link-type EN10MB tcpdump: WARNING: compensating for unaligned libpcap packets 20:38:28.558385 openbsd.monzell.com.856 > kerberos.monzell.com.sunrpc: udp 100 20:38:28.559154 openbsd.monzell.com.856 > kerberos.monzell.com.892: udp 96 20:38:30.592761 openbsd.monzell.com.856 > kerberos.monzell.com.nfsd: xid 0x22000000 (NFSv2) 40 null 20:38:33.558107 arp reply openbsd.monzell.com is-at 52:54:00:52:8f:66 I tried various options of forcing it to try to mount as nfsv3 such as: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport or: /defaults type:=nfs;rhost:=kerberos.monzell.com;rfs:=/exports;\ sublink:=${key};opts:=rw,nodev,nosuid,soft,intr,vers=-3,proto=tcp,resvport * ${host}==${rhost};type:=nfs;fs:=${rfs};opts:=rw,nodev,nosuid,soft,intr,vers=3,proto=tcp,resvport Nothing yet still. Curious enough, OpenBSD mounts defaults to version 3, so I am not sure why it would start with version in amd. What would be the correct options to pass?

  Read the article

• Can't get network bridging to work

  - by Antonis Christofides

  I'm trying to make network bridging to work on a Debian squeeze (I'm experimenting in order to make a QEMU/KVM virtual machine that will be visible to the outside network as if it were a distinct machine). The problem is that when I type brctl addif br0 eth0 then I lose connectivity to the network until I type brctl delif br0 eth0. More specifically, here's how my machine looks like before I do anything (essentially eth0 is listening on 147.102.160.153): root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591848sec preferred_lft 604648sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000 link/ether 4c:ed:de:8e:44:d7 brd ff:ff:ff:ff:ff:ff 4: vboxnet0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 0a:00:27:00:00:00 brd ff:ff:ff:ff:ff:ff 5: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether ee:7c:88:59:d0:e8 brd ff:ff:ff:ff:ff:ff Now let me add the bridge: root@laura:/home/anthony# brctl addbr br0 root@laura:/home/anthony# ip tuntap add dev tap0 mode tap root@laura:/home/anthony# ip link set tap0 up root@laura:/home/anthony# brctl addif br0 tap0 Until here everything continues to work normally. Finally, I try to add eth0 to the bridge: root@laura:/home/anthony# brctl addif br0 eth0 At this point, I no longer have a network connection. If I try to ping something, it tells "Destination Host Unreachable". The output of ip addr show seems normal: root@laura:/home/anthony# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 8c:73:6e:db:1c:1b brd ff:ff:ff:ff:ff:ff inet 147.102.160.153/24 brd 147.102.160.255 scope global eth0 inet6 2001:648:2000:a0:8e73:6eff:fedb:1c1b/64 scope global dynamic valid_lft 2591908sec preferred_lft 604708sec inet6 fe80::8e73:6eff:fedb:1c1b/64 scope link valid_lft forever preferred_lft forever [snip wlan0, vboxnet0 and pan0, which are down and irrelevant] 8: br0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff 9: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether 16:30:f2:67:ab:75 brd ff:ff:ff:ff:ff:ff inet6 fe80::1430:f2ff:fe67:ab75/64 scope link valid_lft forever preferred_lft forever Also: root@laura:/home/anthony# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 147.102.160.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 147.102.160.200 0.0.0.0 UG 0 0 0 eth0 I can't understand what I'm doing wrong. I want the machine to continue to listen on 147.102.160.153 on eth0, and in addition to that I want to have a tap0 interface, bridged to eth0, that will be available to the guest machine so that the latter listens on another ip address (say 147.102.160.205). (If there's another way to achieve what I want, I'm also interested.)

  Read the article

• Varnish cached 'MISS status' object?

  - by Hesey

  My site uses nginx, varnish, jboss. And some url will be cached by varnish, it depends a response header from jboss. The first time, jboss tells varnish doesn't cache this url. Then the second request, jboss tells varnish to cache, but varnish won't cache it. I used varnishstat and found that 1 object is cached in Varnish, is that the 'MISS status' object? I remove grace code and the problem still exists. When I PURGE this url, varnish works fine and cache the url then. But I can't PURGE so much urls every startup time, how can I fix this? The configuration: acl local { "localhost"; } backend default { .host = "localhost"; .port = "8080"; .probe = { .url = "/preload.htm"; .interval = 3s; .timeout = 1s; .window = 5; .threshold = 3; } } sub vcl_deliver { if (req.request == "PURGE") { remove resp.http.X-Varnish; remove resp.http.Via; remove resp.http.Age; remove resp.http.Content-Type; remove resp.http.Server; remove resp.http.Date; remove resp.http.Accept-Ranges; remove resp.http.Connection; set resp.http.keeplive="true"; } else { if (obj.hits > 0) { set resp.http.X-Cache = "HIT"; } else { set resp.http.X-Cache = "MISS"; } } } sub vcl_recv { if(req.url ~ "/check.htm"){ error 404 "N"; } if( req.http.host ~ "store." || req.request == "POST"){ return (pipe); } if (req.backend.healthy) { set req.grace = 30s; } else { set req.grace = 10m; } set req.http.x-cacheKey = "0"; if(req.url ~ "/shop/view_shop.htm" || req.url ~ "/shop/viewShop.htm" || req.url ~ "/index.htm"){ if(req.url ~ "search=y"){ set req.http.x-cacheKey = req.http.host + "/search.htm"; }else if(req.url !~ "bbs=y" && req.url !~ "shopIntro=y" && req.url !~ "shop_intro=y"){ set req.http.x-cacheKey = req.http.host + "/index.htm"; } }else if(req.url ~ "/search"){ set req.http.x-cacheKey = req.http.host + "/search.htm"; } if( req.http.x-cacheKey == "0" && req.url !~ "/i/"){ return (pipe); } if (req.request == "PURGE") { if (client.ip ~ local) { return (lookup); } else { error 405 "Not allowed."; } } if (req.url ~ "/i/") { set req.http.x-shop-url = req.original_url; }else { unset req.http.cookie; } } sub vcl_fetch { set beresp.grace = 10m; #unset beresp.http.x-cacheKey; if (req.url ~ "/i/" || req.url ~ "status" ){ set beresp.ttl = 0s; /* ttl=0 for dynamic content */ } else if(beresp.http.x-varnish-cache != "1"){ set beresp.do_esi = true; /* Do ESI processing */ set beresp.ttl = 0s; unset beresp.http.set-cookie; } else { set beresp.do_esi = true; /* Do ESI processing */ set beresp.ttl = 1800s; unset beresp.http.set-cookie; } } sub vcl_hash { hash_data(req.http.x-cacheKey); return (hash); } sub vcl_error { if (req.request == "PURGE") { return (deliver); } else { set obj.http.Content-Type = "text/html; charset=gbk"; synthetic {"<!--ve-->"}; return (deliver); } } sub vcl_hit { if (req.request == "PURGE") { set obj.ttl = 0s; error 200 "Purged."; } } sub vcl_miss { if (req.request == "PURGE") { error 404 "N"; } }

  Read the article

• set proxy in apache for XMPP chat

  - by Hunt

  I want to setup a proxy settings in Apache to use Facebook XMPP Chat So far I have setup ejabber server and I am able to access xmpp service using http://mydomain.com:5280/xmpp-http-bind I am able to create Jabber Account too. Now as I want to integrate Facebook XMPP chat , I want my server to sit in between client and chat.facebook.com because I want to implement Facebook chat and custom chat too. So I have read this article and come to know that I need to serve BOSH Service as a proxy in apache to access Facebook Chat service. So I don't know how to set up a proxy in a apache httpd.conf as I have tried following <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind ProxyPassReverse /xmpp-httpbind http://www.mydomain.com:5280/xmpp-http-bind But whenever I request http://www.mydomain.com:5280/xmpp-http-bind from strophe.js I am getting following response from server <body type='terminate' condition='internal-server-error' xmlns='http://jabber.org/protocol/httpbind'> BOSH module not started </body> and server log says following E(<0.567.0:ejabberd_http_bind:1239) : You are trying to use BOSH (HTTP Bind) in host "chat.facebook.com", but the module mod_http_bind is not started in that host. Configure your BOSH client to connect to the correct host, or add your desired host to the configuration, or check your 'modules' section in your ejabberd configuration file. here is my existing settings of ejabberd.cfg , but still no luck {5280, ejabberd_http, [ {access,all}, {request_handlers, [ {["pub", "archive"], mod_http_fileserver}, {["xmpp-http-bind"], mod_http_bind} ]}, captcha, http_bind, http_poll, register, web_admin ]} ]}. in a module section {mod_http_bind, [{max_inactivity, 120}]}, and whenever i fire http://www.mydomain.com:5280/xmpp-http-bind url independently am getting following message ejabberd mod_http_bind An implementation of XMPP over BOSH (XEP-0206) This web page is only informative. To use HTTP-Bind you need a Jabber/XMPP client that supports it. I have added chat.facebook.com in a list of host in ejabber.cfg as follows {hosts, ["localhost","mydomain.com","chat.facebook.com"]} and now i am getting following response <body xmlns='http://jabber.org/protocol/httpbind' sid='710da2568460512eeb546545a65980c2704d9a27' wait='300' requests='2' inactivity='120' maxpause='120' polling='2' ver='1.8' from='chat.facebook.com' secure='true' authid='1917430584' xmlns:xmpp='urn:xmpp:xbosh' xmlns:stream='http://etherx.jabber.org/streams' xmpp:version='1.0'> <stream:features xmlns:stream='http://etherx.jabber.org/streams'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>DIGEST-MD5</mechanism> <mechanism>PLAIN</mechanism> </mechanisms> <c xmlns='http://jabber.org/protocol/caps' hash='sha-1' node='http://www.process-one.net/en/ejabberd/' ver='yy7di5kE0syuCXOQTXNBTclpNTo='/> <register xmlns='http://jabber.org/features/iq-register'/> </stream:features> </body> if i use valid BOSH service created my jack moffit http://bosh.metajack.im:5280/xmpp-httpbind then i am getting following valid XML from facebook , but from my server i am not getting this <body xmlns='http://jabber.org/protocol/httpbind' inactivity='60' secure='true' authid='B8732AA1' content='text/xml; charset=utf-8' window='3' polling='15' sid='928073b02da55d34eb3c3464b4a40a37' requests='2' wait='300'> <stream:features xmlns:stream='http://etherx.jabber.org/streams' xmlns='jabber:client'> <mechanisms xmlns='urn:ietf:params:xml:ns:xmpp-sasl'> <mechanism>X-FACEBOOK-PLATFORM</mechanism> <mechanism>DIGEST-MD5</mechanism> </mechanisms> </stream:features> </body> Can anyone please help me to resolve the issue

  Read the article

• Linux not buffering block I/O when the device is not "in use" (i.e. mounted)

  - by Radek Hladík

  I am installing new server and I've found an interesting issue. The server is running Fedora 19 (3.11.7-200.fc19.x86_64 kernel) and is supposed to host a few KVM/Qemu virtual servers (mail server, file server, etc..). The HW is Intel(R) Xeon(R) CPU 5160 @ 3.00GHz with 16GB RAM. One of the most important features will be Samba server and we have decided to make it as virtual machine with almost direct access to the disks. So the real HDD is cached on SSD (via bcache) then raided with md and the final device is exported into the virtual machine via virtio. The virtual machine is again Fedora 19 with the same kernel. One important topic to find out is whether the virtualization layer will not introduce high overload into disk I/Os. So far I've been able to get up to 180MB/s in VM and up to 220MB/s on real HW (on the SSD disk). I am still not sure why the overhead is so big but it is more than the network can handle so I do not care so much. The interesting thing is that I've found that the disk reads are not buffered in the VM unless I create and mount FS on the disk or I use the disks somehow. Simply put: Lets do dd to read disk for the first time (the /dev/vdd is an old Raptor disk 70MB/s is its real speed): [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 36.8038 s, 71.2 MB/s Buffers: 14444 kB Rereading the data shows that they are cached somewhere but not in buffers of the VM. Also the speed increased to "only" 500MB/s. The VM has 4GB of RAM (more that the test file) [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.16016 s, 508 MB/s Buffers: 14444 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.05727 s, 518 MB/s Buffers: 14444 kB Now lets mount the FS on /dev/vdd and try the dd again: [root@localhost ~]# mount /dev/vdd /mnt/tmp [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 4.68578 s, 559 MB/s Buffers: 2574592 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 1.50504 s, 1.7 GB/s Buffers: 2574592 kB While the first read was the same, all 2.6GB got buffered and the next read was at 1.7GB/s. And when I unmount the device: [root@localhost ~]# umount /mnt/tmp [root@localhost ~]# cat /proc/meminfo | grep Buffers Buffers: 14452 kB [root@localhost ~]# dd if=/dev/vdd of=/dev/null bs=256k count=10000 ; cat /proc/meminfo | grep Buffers 2621440000 bytes (2.6 GB) copied, 5.10499 s, 514 MB/s Buffers: 14468 kB The bcache was disabled while testing and the results are same on faster (newer) HDDs and on SSD (except for the initial read speed of course). To sum it up. When I read from the device via dd first time, it gets read from the disk. Next time I reread it gets cached in the host but not in the guest (thats actually the same issue, more on that later). When I mount the filesystem but try to read the device directly it gets cached in VM (via buffers). As soon as I stop "using" it, buffers are discarded and the device is not cached anymore in the VM. When I looked into buffers value on the host I realized that the situation is the same. The block I/O gets buffered only when the disk is in use, in this case it means "exported to a VM". On host, after all the measurement done: 3165552 buffers On the host, after the VM shutdown: 119176 buffers I know it is not important as the disks will be mounted all the time but I am curious and I would like to know why it is working like this.

  Read the article

• KVM + Cloudmin + IpTables

  - by Alex

  I have a KVM virtualization on a machine. I use Ubuntu Server + Cloudmin (in order to manage virtual machine instances). On a host system I have four network interfaces: ebadmin@saturn:/var/log$ ifconfig br0 Link encap:Ethernet HWaddr 10:78:d2:ec:16:38 inet addr:192.168.0.253 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::1278:d2ff:feec:1638/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:589337 errors:0 dropped:0 overruns:0 frame:0 TX packets:334357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:753652448 (753.6 MB) TX bytes:43385198 (43.3 MB) br1 Link encap:Ethernet HWaddr 6e:a4:06:39:26:60 inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::6ca4:6ff:fe39:2660/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16995 errors:0 dropped:0 overruns:0 frame:0 TX packets:13309 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2059264 (2.0 MB) TX bytes:1763980 (1.7 MB) eth0 Link encap:Ethernet HWaddr 10:78:d2:ec:16:38 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:610558 errors:0 dropped:0 overruns:0 frame:0 TX packets:332382 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:769477564 (769.4 MB) TX bytes:44360402 (44.3 MB) Interrupt:20 Memory:fe400000-fe420000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:239632 errors:0 dropped:0 overruns:0 frame:0 TX packets:239632 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50738052 (50.7 MB) TX bytes:50738052 (50.7 MB) tap0 Link encap:Ethernet HWaddr 6e:a4:06:39:26:60 inet6 addr: fe80::6ca4:6ff:fe39:2660/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17821 errors:0 dropped:0 overruns:0 frame:0 TX packets:13703 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:2370468 (2.3 MB) TX bytes:1782356 (1.7 MB) br0 is connected to a real network, br1 is used to create a private network shared between guest systems. Now I need to configure iptables for network access. First of all I allow ssh sessions on port 8022 on the host system, then I allow all connections in state RELATED, ESTABLISHED. This is working ok. I install another system as guest, it's IP address is 192.168.10.2, and now I have two problems: I want to allow the access from this host to the outside world, cannot accomplish this. I can ssh from the host. I want to be able to ssh to the guest from the outside world using 8023 port. Cannot accomplish this. Full iptables configuration is following: ebadmin@saturn:/var/log$ sudo iptables --list [sudo] password for ebadmin: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:8022 ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED LOG all -- anywhere anywhere LOG level warning Chain FORWARD (policy ACCEPT) target prot opt source destination LOG all -- anywhere anywhere LOG level warning Chain OUTPUT (policy ACCEPT) target prot opt source destination LOG all -- anywhere anywhere LOG level warning ebadmin@saturn:/var/log$ sudo iptables -t nat --list Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT tcp -- anywhere anywhere tcp spt:8023 to:192.168.10.2:22 Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination The worst of all is that I don't know how to interpret iptables logs. I don't see the final decision of the firewall. Need help urgently.

  Read the article

• Trying to connect phpMyAdmin to remote mySQL server ( 2002: can't connect )

  - by Malcolm Jones

  Trying to get phpMyAdmin to talk to a remote mySQL server. The config is below and there is already a user set up in mySQL DB to be able to log in from the specified host that PMA sits on. Hosting is provided by Rackspace (Rightscale) and both cloud servers behind the same firewall. [config.inc.php] <?php $cfg['blowfish_secret'] = ''; $i = 0; $i++; $cfg['Servers'][$i]['host'] = 'XX.XX.XX.XX'; // MySQL hostname or IP address $cfg['Servers'][$i]['port'] = ''; // MySQL port - leave blank for default port $cfg['Servers'][$i]['socket'] = ''; // Path to the socket - leave blank for default socket $cfg['Servers'][$i]['connect_type'] = 'tcp'; // How to connect to MySQL server ('tcp' or 'socket') $cfg['Servers'][$i]['extension'] = 'mysql'; // The php MySQL extension to use ('mysql' or 'mysqli') $cfg['Servers'][$i]['compress'] = FALSE; // Use compressed protocol for the MySQL connection // (requires PHP >= 4.3.0) $cfg['Servers'][$i]['controluser'] = ''; // MySQL control user settings // (this user must have read-only $cfg['Servers'][$i]['controlpass'] = ''; // access to the "mysql/user" // and "mysql/db" tables). // The controluser is also // used for all relational // features (pmadb) $cfg['Servers'][$i]['auth_type'] = 'config'; // Authentication method (config, http or cookie based)? $cfg['Servers'][$i]['user'] = 'USERNAME'; // MySQL user $cfg['Servers'][$i]['password'] = 'PASSWORD'; // MySQL password (only needed // with 'config' auth_type) $cfg['Servers'][$i]['only_db'] = ''; // If set to a db-name, only // this db is displayed in left frame // It may also be an array of db-names, where sorting order is relevant. $cfg['Servers'][$i]['hide_db'] = ''; // Database name to be hidden from listings $cfg['Servers'][$i]['verbose'] = ''; // Verbose name for this host - leave blank to show the hostname $cfg['Servers'][$i]['pmadb'] = ''; // Database used for Relation, Bookmark and PDF Features // (see scripts/create_tables.sql) // - leave blank for no support // DEFAULT: 'phpmyadmin' $cfg['Servers'][$i]['bookmarktable'] = ''; // Bookmark table // - leave blank for no bookmark support // DEFAULT: 'pma_bookmark' $cfg['Servers'][$i]['relation'] = ''; // table to describe the relation between links (see doc) // - leave blank for no relation-links support // DEFAULT: 'pma_relation' $cfg['Servers'][$i]['table_info'] = ''; // table to describe the display fields // - leave blank for no display fields support // DEFAULT: 'pma_table_info' $cfg['Servers'][$i]['table_coords'] = ''; // table to describe the tables position for the PDF schema // - leave blank for no PDF schema support // DEFAULT: 'pma_table_coords' $cfg['Servers'][$i]['pdf_pages'] = ''; // table to describe pages of relationpdf // - leave blank if you don't want to use this // DEFAULT: 'pma_pdf_pages' $cfg['Servers'][$i]['column_info'] = ''; // table to store column information // - leave blank for no column comments/mime types // DEFAULT: 'pma_column_info' $cfg['Servers'][$i]['history'] = ''; // table to store SQL history // - leave blank for no SQL query history // DEFAULT: 'pma_history' $cfg['Servers'][$i]['verbose_check'] = TRUE; // set to FALSE if you know that your pma_* tables // are up to date. This prevents compatibility // checks and thereby increases performance. $cfg['Servers'][$i]['AllowRoot'] = TRUE; // whether to allow root login $cfg['Servers'][$i]['AllowDeny']['order'] // Host authentication order, leave blank to not use = ''; $cfg['Servers'][$i]['AllowDeny']['rules'] // Host authentication rules, leave blank for defaults = array(); Please let me know if you need anymore info. -- Malcolm

  Read the article

• What's wrong with this vcl config for varnish-cache as load balancer?

  - by dabito

  I have the current configurations active on my default.vcl varnish file on the machine that balances the load for other two machines (the other two machines also have varnish active). My intention is to have this server do only the load balancing and the other machines do the processing and also their own caching. My problem is that even with the config testing (not even a stress test or anything, just a few requests a minute) I get the guru meditation error and have to restart varnish. This is the default.vcl for the load balancing server: backend vader { .host = "app1.server.com"; .probe = { .url = "/"; .interval = 10s; .timeout = 4s; .window = 5; .threshold = 3; } } backend malgus { .host = "app2.server.com"; .probe = { .url = "/"; .interval = 10s; .timeout = 4s; .window = 5; .threshold = 3; } } director dooku round-robin { { .backend = vader; } { .backend = malgus; } } sub vcl_recv { if (req.http.host ~ "^balancer.server.com$") { set req.backend = dooku; } } Am I doing something wrong or missing something? EDIT: This is varnishlog's output: 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345839995 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345839998 1.0 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345840001 1.0 0 Backend_health - malgus Still sick 4--X--- 0 3 5 0.000000 3.846876 0 Backend_health - vader Still sick 4--X--- 0 3 5 0.000000 3.839194 0 CLI - Rd ping 0 CLI - Wr 200 19 PONG 1345840004 1.0 14 SessionOpen c 10.150.7.151 38272 :80 14 ReqStart c 10.150.7.151 38272 458200540 14 RxRequest c GET 14 RxURL c / 14 RxProtocol c HTTP/1.1 14 RxHeader c Host: dooku-dev.excelsior.com 14 RxHeader c Connection: keep-alive 14 RxHeader c User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 14 RxHeader c Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 14 RxHeader c Accept-Encoding: gzip,deflate,sdch 14 RxHeader c Accept-Language: en-US,en;q=0.8,es-419;q=0.6,es;q=0.4 14 RxHeader c Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 14 RxHeader c Cookie: SESSa87d6c6da0c61037a9169122dc5e4a19=HR_0Srhgc-uDArT3aJFzOBy31FtzneTXg38byr1eGMU; __atuvc=4%7C33 14 VCL_call c recv pass 14 VCL_call c hash 14 Hash c / 14 Hash c dooku-dev.excelsior.com 14 VCL_return c hash 14 VCL_call c pass pass 14 FetchError c no backend connection 14 VCL_call c error deliver 14 VCL_call c deliver deliver 14 TxProtocol c HTTP/1.1 14 TxStatus c 503 14 TxResponse c Service Unavailable 14 TxHeader c Server: Varnish 14 TxHeader c Content-Type: text/html; charset=utf-8 14 TxHeader c Retry-After: 5 14 TxHeader c Content-Length: 418 14 TxHeader c Accept-Ranges: bytes 14 TxHeader c Date: Fri, 24 Aug 2012 20:26:44 GMT 14 TxHeader c X-Varnish: 458200540 14 TxHeader c Age: 0 14 TxHeader c Via: 1.1 varnish 14 TxHeader c Connection: close 14 Length c 418 14 ReqEnd c 458200540 1345840004.916415691 1345840004.965190172 0.020933390 0.048741817 0.000032663 14 SessionClose c error 14 StatSess c 10.150.7.151 38272 0 1 1 0 1 0 256 418 14 SessionOpen c 10.150.7.151 38273 :80 14 ReqStart c 10.150.7.151 38273 458200541 14 RxRequest c GET 14 RxURL c /favicon.ico 14 RxProtocol c HTTP/1.1 14 RxHeader c Host: dooku-dev.excelsior.com 14 RxHeader c Connection: keep-alive 14 RxHeader c Accept: */* 14 RxHeader c User-Agent: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11 14 RxHeader c Accept-Encoding: gzip,deflate,sdch 14 RxHeader c Accept-Language: en-US,en;q=0.8,es-419;q=0.6,es;q=0.4 14 RxHeader c Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 14 RxHeader c Cookie: SESSa87d6c6da0c61037a9169122dc5e4a19=HR_0Srhgc-uDArT3aJFzOBy31FtzneTXg38byr1eGMU; __atuvc=4%7C33 14 VCL_call c recv pass 14 VCL_call c hash 14 Hash c /favicon.ico 14 Hash c dooku-dev.excelsior.com 14 VCL_return c hash 14 VCL_call c pass pass 14 FetchError c no backend connection 14 VCL_call c error deliver 14 VCL_call c deliver deliver 14 TxProtocol c HTTP/1.1 14 TxStatus c 503 14 TxResponse c Service Unavailable 14 TxHeader c Server: Varnish 14 TxHeader c Content-Type: text/html; charset=utf-8 14 TxHeader c Retry-After: 5 14 TxHeader c Content-Length: 418 14 TxHeader c Accept-Ranges: bytes 14 TxHeader c Date: Fri, 24 Aug 2012 20:26:45 GMT 14 TxHeader c X-Varnish: 458200541 14 TxHeader c Age: 0 14 TxHeader c Via: 1.1 varnish 14 TxHeader c Connection: close 14 Length c 418 14 ReqEnd c 458200541 1345840005.226389885 1345840005.226457834 0.000026941 0.000043154 0.000024796 14 SessionClose c error 14 StatSess c 10.150.7.151 38273 0 1 1 0 1 0 256 418

  Read the article

• Deploying BAM Data Control Application to WLS server

  - by [email protected]

  var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www."); document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E")); try { var pageTracker = _gat._getTracker("UA-15829414-1"); pageTracker._trackPageview(); } catch(err) {} Typically we would test our ADF pages that use BAM Data control using integrated wls server (ADRS). If we have to deploy this same application to a standalone WLS we have to make sure we have the BAM server connection created in WLS.unless we do that we may face runtime errors.In Development mode of WLS(Reference) For development-mode WebLogic Server, you can set the mode to OVERWRITE to test user names and passwords. You can set the mode by running setDomainEnv.cmd or setDomainEnv.sh with the following option added to the command. Add the following to the JAVA_PROPERTIES entry in the <FMW_HOME>/user_projects/domains/<yourdomain>/bin/setDomainEnv.sh file: -Djps.app.credential.overwrite.allowed=true In Production mode of WLS Enable MDS Create and/or Register your MDS repository. For more details refer this Edit adf-config.xml from your application and add the following tag <adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config">     <mds-config version="11.1.1.000">     <persistence-config>   <metadata-store-usages>     <metadata-store-usage default-cust-store="true" deploy-target="true" id="myRepos">     </metadata-store-usage>   </metadata-store-usages>   </persistence-config>           </mds-config>  </adf-mds-config>Deploy the application to WLS server after picking the appropriate repository during deployment from the MDS Repository dialog that pops up Enterprise Manager (Use these steps if using a version prior to 11gR1 PS1 release of JDeveloper) Go to EM (http://<host>:<port>/EMIn the left pane, deployments select Application1(your application)In the right pane, top dropdown select "System Mbean Browser->oracle.adf.share.connections->Server: AdminServer->Server: AdminServer->Application:<Appname>->ADFConnections"Right pane click "Operations->CreateConnection"Enter Connection Type as "BAMConnection"Enter the connection name same as the one defined in JdevClick "Invoke"Click "Return"Click on Operation->SaveNow in the ADFConnections in the navigator, select the connection just created and enter all the configuration details.Save and run the page. Enterprise Manager (Use these steps or the steps above if using 11gR1 PS1 or newer) Go to EM (http://<host>:<port>/EMIn the left pane, deployments select Application1(your application)In the right pane, click on "Application Deployment" to invoke to dropdown. In that select "ADF -> Configure ADF Connections"Select Connection Type as "BAM" from the drop downEnter Connection Type as to be the same as the one defined in JDevClick on "Create Connection". This should add a new row below under "BAM Connections"Select the new connection and click on the "Edit" icon. This should bring up a dialogSpecific appropriate values for all connection parameters - Username, password, BAM Server Host, BAM Server Port, Webtier Server Host, Webtier Server Port and BAM Webtier Protocol - and then click on OK to dismiss the dialogClick on "Apply"Run the page page.

  Read the article

• Validating Petabytes of Data with Regularity and Thoroughness

  - by rickramsey

  by Brian Zents When former Intel CEO Andy Grove said “only the paranoid survive,” he wasn’t necessarily talking about tape storage administrators, but it’s a lesson they’ve learned well. After all, tape storage is the last line of defense to prevent data loss, so tape administrators are extra cautious in making sure their data is secure. Not surprisingly, we are often asked for ways to validate tape media and the files on them. In the past, an administrator could validate the media, but doing so was often tedious or disruptive or both. The debut of the Data Integrity Validation (DIV) and Library Media Validation (LMV) features in the Oracle T10000C drive helped eliminate many of these pains. Also available with the Oracle T10000D drive, these features use hardware-assisted CRC checks that not only ensure the data is written correctly the first time, but also do so much more efficiently. Traditionally, a CRC check takes at least 25 seconds per 4GB file with a 2:1 compression ratio, but the T10000C/D drives can reduce the check to a maximum of nine seconds because the entire check is contained within the drive. No data needs to be sent to a host application. A time savings of at least 64 percent is extremely beneficial over the course of checking an entire 8.5TB T10000D tape. While the DIV and LMV features are better than anything else out there, what storage administrators really need is a way to check petabytes of data with regularity and thoroughness. With the launch of Oracle StorageTek Tape Analytics (STA) 2.0 in April, there is finally a solution that addresses this longstanding need. STA bundles these features into one interface to automate all media validation activities across all Oracle SL3000 and SL8500 tape libraries in an environment. And best of all, the validation process can be associated with the health checks an administrator would be doing already through STA. In fact, STA validates the media based on any of the following policies: Random Selection – Randomly selects media for validation whenever a validation drive in the standalone library or library complex is available. Media Health = Action – Selects media that have had a specified number of successive exchanges resulting in an Exchange Media Health of “Action.” You can specify from one to five exchanges. Media Health = Evaluate – Selects media that have had a specified number of successive exchanges resulting in an Exchange Media Health of “Evaluate.” You can specify from one to five exchanges. Media Health = Monitor – Selects media that have had a specified number of successive exchanges resulting in an Exchange Media Health of “Monitor.” You can specify from one to five exchanges. Extended Period of Non-Use – Selects media that have not had an exchange for a specified number of days. You can specify from 365 to 1,095 days (one to three years). Newly Entered – Selects media that have recently been entered into the library. Bad MIR Detected – Selects media with an exchange resulting in a “Bad MIR Detected” error. A bad media information record (MIR) indicates degraded high-speed access on the media. To avoid disrupting host operations, an administrator designates certain drives for media validation operations. If a host requests a file from media currently being validated, the host’s request takes priority. To ensure that the administrator really knows it is the media that is bad, as opposed to the drive, STA includes drive calibration and qualification features. In addition, validation requests can be re-prioritized or cancelled as needed. To ensure that a specific tape isn’t validated too often, STA prevents a tape from being validated twice within 24 hours via one of the policies described above. A tape can be validated more often if the administrator manually initiates the validation. When the validations are complete, STA reports the results. STA does not report simply a “good” or “bad” status. It also reports if media is even degraded so the administrator can migrate the data before there is a true failure. From that point, the administrators’ paranoia is relieved, as they have the necessary information to make a sound decision about the health of the tapes in their environment. About the Photograph Photograph taken by Rick Ramsey in Death Valley, California, May 2014 - Brian Follow OTN Garage on: Web | Facebook | Twitter | YouTube

  Read the article

• AdventureWorks2012 now available for all on SQL Azure

  - by jamiet

  Three days ago I tweeted this: Idea. MSFT could host read-only copies of all the [AdventureWorks] DBs up on #sqlazure for the SQL community to use. RT if agree #sqlfamily — Jamie Thomson (@jamiet) March 24, 2012 Evidently I wasn't the only one that thought this was a good idea because as you can see from the screenshot that tweet has, so far, been retweeted more than fifty times. Clearly there is a desire to see the AdventureWorks databases made available for the community to noodle around on so I am pleased to announce that as of today you can do just that - [AdventureWorks2012] now resides on SQL Azure and is available for anyone, absolutely anyone, to connect to and use* for their own means. *By use I mean "issue some SELECT statements". You don't have permission to issue INSERTs, UPDATEs, DELETEs or EXECUTEs I'm afraid - if you want to do that then you can get the bits and host it yourself. This database is free for you to use but SQL Azure is of course not free so before I give you the credentials please lend me your ears eyes for a short while longer. AdventureWorks on Azure is being provided for the SQL Server community to use and so I am hoping that that same community will rally around to support this effort by making a voluntary donation to support the upkeep which, going on current pricing, is going to be $119.88 per year. If you would like to contribute to keep AdventureWorks on Azure up and running for that full year please donate via PayPal to [email protected]: Any amount, no matter how small, will help. If those 50+ people that retweeted me beforehand all contributed $2 then that would just about be enough to keep this up for a year. If the community contributes more that we need then there are a number of additional things that could be done: Host additional databases (Northwind anyone??) Host in more datacentres (this first one is in Western Europe) Make a charitable donation That last one, a charitable donation, is something I would really like to do. The SQL Community have proved before that they can make a significant contribution to charitable orgnisations through purchasing the SQL Server MVP Deep Dives book and I harbour hopes that AdventureWorks on Azure can continue in that vein. So please, if you think AdventureWorks on Azure is something that is worth supporting please make a contribution. OK, with the prickly subject of begging for cash out of the way let me share the details that you need to connect to [AdventureWorks2012] on SQL Azure: Server mhknbn2kdz.database.windows.net  Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly That user sqlfamily has all the permissions required to enable you to query away to your heart's content. Here is the code that I used to set it up: CREATE USER sqlfamily FOR LOGIN sqlfamily;CREATE ROLE sqlfamilyrole;EXEC sp_addrolemember 'sqlfamilyrole','sqlfamily';GRANT VIEW DEFINITION ON Database::AdventureWorks2012 TO sqlfamilyrole;GRANT VIEW DATABASE STATE ON Database::AdventureWorks2012 TO sqlfamilyrole;GRANT SHOWPLAN TO sqlfamilyrole;EXEC sp_addrolemember 'db_datareader','sqlfamilyrole'; You can connect to the database using SQL Server Management Studio (instructions to do that are provided at Walkthrough: Connecting to SQL Azure via the SSMS) or you can use the web interface at https://mhknbn2kdz.database.windows.net: Lastly, just for a bit of fun I created a table up there called [dbo].[SqlFamily] into which you can leave a small calling card. Simply execute the following SQL statement (changing the values of course): INSERT [dbo].[SqlFamily]([Name],[Message],[TwitterHandle],[BlogURI])VALUES ('Your name here','Some Message','your twitter handle (optional)','Blog URI (optional)'); [Id] is an IDENTITY field and there is a default constraint on [DT] hence there is no need to supply a value for those. Note that you only have INSERT permissions, not UPDATE or DELETE so make sure you get it right first time! Any offensive or distasteful remarks will of course be deleted :) Thank you for reading this far and have fun using AdventureWorks on Azure. I hope it proves to be useful for some of you. @jamiet AdventureWorks on Azure - Provided by the SQL Server community, for the SQL Server community!

  Read the article

• Making the most of next weeks SharePoint 2010 developer training

  - by Eric Nelson

  [you can still register if you are free on the afternoons of 9th to 11th – UK time] We have 50+ registrations with more coming in – which is fantastic. Please read on to make the most of the training. Background We have structured the training to make sure that you can still learn lots during the three days even if you do not have SharePoint 2010 installed. Additionally the course is based around a subset of the channel 9 training to allow you to easily dig deeper or look again at specific areas. Which means if you have zero time between now and next Wednesday then you are still good to go. But if you can do some pre-work you will likely get even more out of the three days. Step 1: Check out the topics and resources available on-demand The course is based around a subset of the channel 9 training to allow you to easily dig deeper or look again at specific areas. Take a lap around the SharePoint 2010 Training Course on Channel 9 Download the SharePoint Developer Training Kit Step 2: Use a pre-configured Virtual Machine which you can download (best start today – it is large!) Consider using the VM we created If you don't have access to SharePoint 2010. You will need a 64bit host OS and bare minimum of 4GB of RAM. 8GB recommended. Virtual PC can not be used with this VM – Virtual PC only supports 32bit guests. The 2010-7a Information Worker VM gives you everything you need to develop for SharePoint 2010. Watch the Video on how to use this VM Download the VM Remember you only need to download the “parts” for the 2010-7a VM. There are 3 subtly different ways of using this VM: Easiest is to follow the advice of the video and get yourself a host OS of Windows Server 2008 R2 with Hyper-V and simply use the VM Alternatively you can take the VHD and create a “Boot to VHD” if you have Windows 7 Ultimate or Enterprise Edition. This works really well – especially if you are already familiar with “Boot to VHD” (This post I did will help you get started) Or you can take the VHD and use an alternative VM tool such as VirtualBox if you have a different host OS. NB: This tends to involve some work to get everything running fine. Check out parts 1 to 3 from Rolly and if you go with Virtual Box use an IDE controller not SATA. SATA will blue screen. Note in the screenshot below I also converted the vhd to a vmdk. I used the FREE Starwind Converter to do this whilst I was fighting blue screens – not sure its necessary as VirtualBox does now work with VHDs. or Step 3 – Install SharePoint 2010 on a 64bit Windows 7 or Vista Host I haven’t tried this but it is now supported. Check out MSDN. Final notes: I am in the process of securing a number of hosted VMs for ISVs directly managed by my team. Your Architect Evangelist will have details once I have them! Else we can sort out on the Wed. Regrettably I am unable to give folks 1:1 support on any issues around Boot to VHD, 3rd party VM products etc. Related Links: Check you are fully plugged into the work of my team – have you done these simple steps including joining our new LinkedIn group?

  Read the article

• Web Application Integration Steps in OAM 11gR2 (High Level)

  - by Venkata Srikanth

  Install OAM, Webtier (OHS) and WebGate as per the standard installation steps. Create a WebGate instance (i.e deploy WebGate) A WebGate instance must be created that will copy required bits of agent from WEBGATE_HOME to WebGate instance location that shares the same INSTANCE_HOME with OHS ./deployWebGateInstance.sh –w /Oracle/Middleware/Oracle_WT1/instances/instance1/config/ohs1 –oh /Oracle/Middleware/Oracle_OAMWebGate1 Note: Here –w flag indicates OHS instance folder and –oh indicates the WebGate Oracle home Configure WebGate In the webgate configuration the EditHttpdConf utility will copy OUI instantiated apache_webgate.template from WEBGATE_HOME to webgate instance location (renamed to webgate.conf), and update httpd.conf with one additional line to include webgate.conf. export LD_LIBRARY_PATH=$ LD_LIBRARY_PATH:/Oracle/Middleware/Oracle_WT1/lib Navigate to /Oracle/Middleware/Oracle_OAMWebGate1/webgate/ohs/tools/setup/InstallTools ./EditHttpdConf –w /Oracle/Middleware/Oracle_WT1/instances/instace1/config/OHS/ohs1 –oh /Oracle/Middleware/Oracle_OAMWebGate1 –o webgate.conf Register WebGate Use RREG tool to register the OAM 11G WebGate Navigate to /Oracle/Middleware/Oracle_IDM1/oam/server/rreg/input Edit OAM11Grequest.xml. Change the specific xml content to include the weblogic admin URL, agentBaseURL, host identifier etc.. Navigate to /Oracle/Middleware/Oracle_IDM1/oam/server/rreg/bin Set permissions to oamreg.sh à chmod 777 oamreg.sh Edit oamreg.sh and set OAM_REG_HOME=/Oracle/Middleware/Oracle_IDM1/oam/server/rreg ./oamreg.sh inband input/OAM11Grequest.xml Enter the WebLogic admin credentials when prompted. After performing the above steps, there will be two artifcats created under Oracle/Middleware/Oracle_IDM1/oam/server/rreg/output, namely ObAccessClient.xml (Stroing webgate config parameters) and cwallet.sso (storing the agent key). These files must be copied to WebGate instance config folder (/Oracle/Middleware/Oracle_WT1/instances/instance1/config/ohs1/webgate/config) Restart OHS Deploy the web application (myApp) in WebLogic application server Proxy Configuration in OHS The mod_wl_ohs module enables requests to be proxied from Oracle HTTP Server 11g to Oracle WebLogic Server. Navigate to /Oracle/Middleware/Oracle_WT1/instances/instance1/config/OHS/ohs1 Edit mod_wl_ohs.conf file to include the following: <IfModule weblogic_module> WebLogicHost <WEBLOGIC_HOST> WebLogicPort <WEBLOGIC_PORT> # Debug ON # WLLogFile /tmp/weblogic.log MatchExpression *.jsp </IfModule> <Location /myApp> SetHandler weblogic-handler # PathTrim /weblogic # ErrorPage http:/WEBLOGIC_HOME:WEBLOGIC_PORT/ </Location> Note: Here WEBLOGIC_HOST and WEBLOGIC_PORT are the WebLogic admin server host and port respectively Restart OHS. Now if we access the web application URL with OHS host and port (Ex: http://OHS_HOST:<OHS_PORT>/myApp) so that the requests will be proxied to WebLogic server. Create a new application domain Login to OAM Admin Console Navigate to Shared Componentsà Authentication Schemesà Create Authentication Scheme (Ex: LDAP Auth Scheme. Here the scheme is assoicated with LDAP Authentication Module) Navigate to Policy Configuration à Application Domain à Create Application Domain Enter the Application Domain Name and Click Apply. Navigate to Resources tab and add the resource urls (Web Application URLs that needs to be protected) Navigate to Authentication Policy tab à Create a new authentication ploicy by providing the Resource URLs (The sample Web Application URLs) and Authentication Scheme. Navigate to Authorization Policy tab à Create a new authorization policy à Enter authorization policy name and navigate to Resource Tab à Attach the Reource URL, Host Identifiers here. Navigate to Conditions tab à Add the conditions like whom to allow and whom to deny access. Navigate to Rules tab à Crate the Allow Rule and Deny Rule with the available conditions from the previous step so that the Authorization Policy may authorize the logins. Navigate to Resources tab and attach the Authentication and Authorization plocies created in the above steps. Test the Web Application Integration.

  Read the article

• GoldenGate 12c - MySQL Active-Active Replication Setup

  - by Jinyu Wang-Oracle

  Active-active  (also called Master-Master or Bi-Directional) replication captures data changes from two or more systems and replicat the changes to synchronize the data.  Active-Active replication is often needed for high availability, load balancing and scaling out purposes.   Oracle GoldenGate is known to be one of the first and the best replication tool handling active-active replications. As of Oracle GoldenGate 12c, it provides (Refer to Oracle GoldenGate 12.1.2 Documentation - Configuring Oracle GoldenGate for Active-Active High Availability for more information) the followings: Robust loop-back prevention Comprehensive conflict resolution and detection support Heterogeneous support across different database versions and operation systems.  Oracle GoldenGate supports active-active configurations for DB2 on z/OS, LUW, and IBM i, MySQL, Oracle, SQL/MX,SQL Server, Sybase, and Teradata. However, the setup is different from database to database. In this example, I will show you how to setup an active-active data replication between two MySQL database instances. The example setup below is to have active-active replication between MySQL 5.5 and MySQL 5.6 instances and is shown as follows: MySQL 5.5 (Manager Port: 15105)  Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3305 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, PASSWORD mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl REPORTROLLOVER AT 05:30 ON saturday TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15106, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3305 targetdb test, userid root, password mysql sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge REPERROR (DEFAULT, ABEND) REPERROR(1062, IGNORE) map test.TCUSTMER, target test.TCUSTMER,colmap(usedefaults, region_code="region code"); map test.TCUSTORD, target test.TCUSTORD; MySQL 5.6 (Manager Port: 15106) Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3306 targetdb test, userid root, password mysql --assumetargetdefs sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge map test.TCUSTMER, target test.TCUSTMER, colmap(usedefaults, "region code"=region_code); map test.TCUSTORD, target test.TCUSTORD; Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3306 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, USERID mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/usr/local/mysql56/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15105, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; The setup parameters are quite self-explanatory. The key setup is to avoid the replication data  looping. Oracle GoldenGate for MySQL uses the information in the replication checkpoint table to identify the transaction applied by replicats and thus avoid extracting those transactions by Oracle GoldenGate extracts. The example setup in the extract in MySQL 5.5 instance is shown as follows.  TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl Setting up an active-active replication is often more complicated than this and requires the following additional considerations. I would elaborate on this in the follow-up discussions. 

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >