Search Results

Search found 2923 results on 117 pages for 'amazon ami'.

Page 108/117 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

  • AT&T Upload Filtering?

    - by xpda
    Using an AT&T DSL, I cannot ftp upload or ftp download a few files of a large 1500 set. The problem is the file name. I can change a few characters of the file name, and they upload fine. I can change the filenames from upper to lower case and they upload fine. If I change back to the original filename, it will not upload again. When it doesn't upload, it starts, transfers about 5% of a 5-10 meg file, and then times out. I have uploaded one of the files under a different name, changed the name back to the original, and it will not download via ftp. It will download onto a browser, and it will ftp download just fine with a different name. It just will not download with ftp. I have reproduced this uploading to three different servers on 1and1 and Amazon EC2. When I try it on a non-AT&T ISP client, it works OK. Here is a file that did not upload until I had renamed it. (I have changed it back to the original name): "http://xpda.com/nautnew/11302 STOVER POINT TO PORT BROWNSVILLE SIDE A.png" This problem is unrelated to connection, speed, and file content. Only things I can see that makes a difference are the file name and ATT DSL. Does ATT have some kind of ftp file filtering? Is there anything else that could cause this behavior?

    Read the article

  • Apache 2 settings for high traffic website

    - by Harry
    I'm having problems with the load on my website. It's an amazon ec2 server with 15Gb ram and 4 CPUs behind an LB. apachetop says I'm getting around 80 reqs per second which seems really low for this kind of server and the load ( given by top ) is usually around 15 but does increase to about 150 in 24 hrs. I'm seeing about 100 active apache processes at any time. Apache is in prefork mode. Mysql is used very little on the server and there are almost no static files. Here are my Apache settings: Timeout 20 KeepAlive Off MaxKeepAliveRequests 0 KeepAliveTimeout 3 <IfModule mpm_prefork_module> StartServers 40 MinSpareServers 25 MaxSpareServers 40 ServerLimit 400 MaxClients 400 MaxRequestsPerChild 4 </IfModule> Can anyone advise on how to tweak the settings? Thanx! Edit: The config was gotten by trial and error. Any and I mean by a number, change to these lines make the load skyrocket in like 5 minutes. It literally jumps to like 200-300 in a matter of minutes. Especially MaxRequestsPerChild. I've tried with 10, 15, 100, 1000 and the load just skyrockets. About php - there are actually only a few php files which aren't really that expensive at all. They just spit some simple stuff out. If I turn on KeepAlive load also goes to space..

    Read the article

  • Get more space for redis in unix server

    - by DevTraveler
    In our app we have only windows servers beside the cases we use redis queues. This case , we use unix server created by amazon. As you can see we do not have a lot of space available and we want to make sure redis has enough space to work without getting stuck. I am little bit new in unix and after reading some data about the unix file system i still was not fully sure how can i give the redis drive (it is in the home directory) more space. I see the mnt that has a lot of space but read it is temporary for cd-rom and network drives. Can you help me figure out how to get more space to my redis ? If it is possible i prefer not to re-install the redis server. Filesystem Size Used Avail Use% Mounted on /dev/xvda1 7.9G 6.7G 880M 89% / udev 7.4G 4.0K 7.4G 1% /dev tmpfs 3.0G 152K 3.0G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.4G 0 7.4G 0% /run/shm /dev/xvdb 414G 30G 364G 8% /mnt Thanks.

    Read the article

  • Ethernet/8P8C crimp contacts bent

    - by Fire Lancer
    (if anyone knows correct terminology please correct). Ive got a (fairly large) number of existing Ethernet cables that over the years many have got damaged connector clips, so got a crimp tool and some new connectors for them. However out of all 4 attempts I have tried, on crimping 2+ of the little copper contacts that bite into the wires have instead just bent to one side, and so gone between the gaps in in the crimp tool... Unless this really is me doing something wrong (what?) I am inclined to blame the hardware, but is this the crimper or the new connectors I got? I tried to take a picture, as you can just about see looking from the left 3rd, 6th, 7th and 8th pins didn't get pushed in, and so don't form a connector. Unfortunately my camera was barely able to focus on it and then this website converted it to a JPEG... Update: Connectors/Cable/Tools: The wires are stranded (looks about 6 and no evidence of being aluminum/not copper), and the pins(?) have 2 little flat spikes lengthways along the cables (I understand to dig into it, while solid core connectors would have like 2 plates designed to go around the core?). Crimper was http://www.amazon.co.uk/gp/product/B0013EXTKK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 (seemed to be highly rated, I already had tools for cutting/stripping). Update2: Picture of crimp "prongs" (?) Update3: Side picture of connector Update4: Comparison with old connector. The top (used) connector is one from a few years back (different tool and connectors), the thing that concerns me that it might not be the tool I need to replace is just how thin the pins are on the new one that maybe a tool could legitimately bend some into a gap rather than pushing them in fully? In fact I can move individual pins to the sides significantly with my fingernail, is that normal?

    Read the article

  • How To Disable Control Panel in Windows 7

    - by Mysticgeek
    If you have a shared computer that your family and friends can access, you might not want them to mess around in the Control Panel, and luckily with a simple tweak you can disable it. Disable Control Panel with Group Policy Note: This process uses Local Group Policy Editor which is not available in Home versions of Windows 7. Skip down below for the registry hack version that works on Home editions as well. First type gpedit.msc into the Search box in the Start menu and hit Enter. When Local Group Policy Editor opens, navigate to User Configuration \ Administrative Templates then select Control Panel in the left Column. In the right column double-click on Prohibit access to the Control Panel. In the next window, select Enable, click OK, then close out of Local Group Policy Editor. After the Control Panel is disabled, you’ll notice it’s no longer listed in the Start Menu. If the user tries to type Control Panel into the Search box in the Start menu, they will get the following message indicating it’s restricted. Disable Control Panel with a Registry Tweak You can also tweak the Registry to disable Control Panel. This will work with all versions of Windows 7, Vista, and XP. Making changes in the Registry is not recommended for beginners and you should create a Restore Point, or backup the Registry before making any changes. Type regedit into the Search box in the Start menu and hit Enter. In Registry Editor navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\Current Version\Policies\Explorer. Then right-click in the right pane and create a new DWORD (32-bit) Value. Name the value NoControlPanel. Then right-click on the new Value and click Modify…   In the Value data field change the value to “1” then click OK. Close out of Registry Editor and restart the machine to complete the process. When you get back from reboot, you’ll notice Control Panel is no longer listed in the Start menu. If a user tries to access it by typing Control Panel into the Search box in the Start menu… They will get the following message indicating it is restricted, just like if you were to disable it via Group Policy. If you want to re-enable the Control Panel, go back into the Registry and change the NoControlPanel value back to “0” then reboot the computer. This comes in handy if you have inexperienced users working on your machine and don’t want them messing with Control Panel settings. Similar Articles Productive Geek Tips Disable User Account Control (UAC) the Easy Way on Win 7 or VistaStill Useful in Vista: Startup Control PanelRestore Missing Items in Windows Vista Control PanelHow To Manage Action Center in Windows 7New Vista Syntax for Opening Control Panel Items from the Command-line TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

    Read the article

  • How To Rip an Audio CD to FLAC with Foobar2000

    - by Mysticgeek
    Foobar2000 is a great audio player that is fully customizable, is light on system resources, and contains a lot of tools and features. Today we show you how to use it to rip an audio CD to FLAC format. Note: For this tutorial we’re going to assume this is the first time you’re ripping a disc with Foobar2000. We’re running it on Windows 7 Ultimate 64-bit. Install Foobar2000 and FLAC First download and install Foobar2000 (link below). The main thing you’ll want to make sure to enable during the install process is Audio CD Support… And the freedb Tagger which are located under Optional Features, then continue through the rest of the install wizard. Next you need to install the latest version of the FLAC codec (link below) following the defaults. Rip Audio CD To rip a CD, place it in your CDROM drive, launch Foobar2000 and click File \ Open Audio CD. Select the appropriate CD drive and click the Rip button. Next you’ll want to lookup the disc information with freedb…or you can manually enter in the track data if it’s a custom disc. Select the proper tag information in the freedb tagger window, then click Update files. The data will be entered in, make sure the radio button next to Go to the Converter Setup dialog is selected, and click the Rip button. In the Converter Setup screen, here you can select the output format, where in our case we’re selecting FLAC. In this window you can choose several other options like the output path, merging the tracks into one or individual files…etc. When you have those settings completed click OK. Next you’ll need to find flac.exe which is located wherever you installed it. On our 64-bit Windows 7 system the default path is C:\Program Files (x86)\FLAC Now wait while your CD is ripped and converted to FLAC. You’ll get a Converter Status Report…after you’ve checked it over you can close out of it. If you set the option to show the output files after conversion you can take a look, make sure all tracks were converted, and play them right away if you want. You can play the tracks in Foobar2000 or any player that supports FLAC. If you want to use WMC or WMP see our article on how to play FLAC files in Windows 7 Media Center or Player. That’s all there is to it! If you’re a fan of Foobar2000 and enjoy your music converted to FLAC format, Foobar2000 does the job quite well. There are a lot of customizations and tools you can use in Foobar2000 that we’ll be taking a look at in future articles. For more information check out our look at this fully customizable music player. Foobar2000 run on XP, Vista, and Windows 7 Links Download Foobar2000 Download FLAC Similar Articles Productive Geek Tips Using Ubuntu: What Package Did This File Come From?Easily Change Audio File Formats with XRECODEFoobar2000 is a Fully Customizable Music PlayerConvert Virtually Any Audio Format with XRECODE IIExtract Audio from a Video File with Pazera Free Audio Extractor TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook

    Read the article

  • Today's Links (6/29/2011)

    - by Bob Rhubart
    Event-Driven SOA: Events meet Services | Guido Schmutz Oracle ACE Director Guido Schmutz shows you how to achieve extreme loose coupling within a Service-Oriented Architecture by using event-driven interactions. Misconceptions About Software Architecture | Sanjeev Kumar A concise, to-the-point, and informative article by Sanjeev Kumar. Good Leaders Acknowledge What Can't Be Done - Jeffrey Pfeffer - Harvard Business Review "None of us likes to admit to bad decisions," says Jeffrey Pfeffer. "But imagine how much harder that is for someone who has been chosen to lead a large organization precisely because he or she is thought to have the power to see the future more clearly and chart a wise course." Suboptimal Thinking within Enterprise Architecture | James McGovern McGovern says: "We need to remember that enterprises live and thrive beyond just the current person at the helm." Boundaryless Information Flow | Richard Veryard "If all the boundaries are removed or porous, then the (extended) enterprise or ecosystem becomes like a giant sponge, in which all information permeates the whole," Veryard says. "Some people may think that's a good idea, but it's not what I'd call loose coupling." Coming to a City Near You: Oracle Business Analytics Summits | Rob Reynolds This series of events includes a Technology and Architecture track. New Date for Implementation of Sun Hands-On Course Requirement (Oracle Certification) As announced on the Oracle Certification website, Java Architect, Java Developer, Solaris System Administrator and Solaris Security Administrator certification tracks will include a new mandatory course attendance requirement. VirtualBox 4.0.10 is now available for download | Bob Netherton Netherton shares information on the new release. Updated Technical Best Practices whitepaper | Anthony Shorten The Technical Best Practices whitepaper has been updated with the latest advice. "New advice includes new installation advice, advanced settings, new security settings and advice for both Oracle WebLogic and IBM WebSphere installations," says Shorten. Kscope 11 ADF, AIA and Business Rules | Peter Paul van de Beek Whitehorses Solution Architect Peter Paul van de Beek shares his impressions of KScope11 presentations by Markus Eisele, Sten Vesterli, and Edwin Biemond. Amazon AWS for the learning experience | Andrej Koelewijn "Using AWS changes your expectations how your internal data center should operate," says Koelewijn. BPMN is dead, long live BPEL! (SOA Partner Community Blog) Jürgen Kress shares information -- including a long list of speakers -- for the SOA & BPM Integration Days 2011 conference, October 12th & 13th 2011 in Düsseldorf. InfoQ: HTML5 and the Dawn of Rich Mobile Web Applications James Pearce introduces cross-platform web apps development using HTML5 and web frameworks, such as jQTouch, jQuery Mobile, Sencha Touch, PhoneGap, outlining what makes a good framework. InfoQ: Interview and Book Excerpt: CMMI for Development "Frameworks like TOGAF are used to define an architecture that aligns IT assets and resources to support key business needs and processes of key stakeholders," says SEI's Mike Konrad. "But the individual application systems, capabilities, services, networks, and other IT assets and infrastructure still need to be acquired, developed, or sustained." InfoQ: Architecting a Cloud-Scale Identity Fabric | Eric Olden "The most cited reason for not moving to the cloud is concern about security," says Olden. "In particular, managing user identity and access in the cloud is a tough problem to solve and a big security concern for organizations."

    Read the article

  • How do you install a USB CD Rom drive?

    - by Matt Allen
    Hello, I recently purchased a USB CD ROM drive, but I don't know how to get it to work with my computer which runs Ubuntu 10.04. http://www.amazon.com/gp/product/B00303H908/ref=oss_product When I issue the lsusb command, it shows up as: Bus 002 Device 016: ID 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter The computer doesn't recognize it automatically. How can I get this drive to show up as an actual drive on my computer? If this particular drive can't handle Linux, can you recommended one which can and provide a link to it so I can purchase it? Thanks! Update: I was asked by Scaine to run a command and report back with the output: joe@joe-laptop:~$ tail -f /var/log/kern.log Dec 29 12:51:35 joe-laptop kernel: [103190.551437] sr 7:0:0:0: [sr1] Add. Sense: Illegal mode for this track Dec 29 12:51:35 joe-laptop kernel: [103190.551446] sr 7:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 Dec 29 12:51:35 joe-laptop kernel: [103190.551463] end_request: I/O error, dev sr1, sector 0 Dec 29 12:51:35 joe-laptop kernel: [103190.877542] sr 7:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Dec 29 12:51:35 joe-laptop kernel: [103190.877551] sr 7:0:0:0: [sr1] Sense Key : Illegal Request [current] Dec 29 12:51:35 joe-laptop kernel: [103190.877559] Info fld=0x0, ILI Dec 29 12:51:35 joe-laptop kernel: [103190.877562] sr 7:0:0:0: [sr1] Add. Sense: Illegal mode for this track Dec 29 12:51:35 joe-laptop kernel: [103190.877572] sr 7:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 Dec 29 12:51:35 joe-laptop kernel: [103190.877588] end_request: I/O error, dev sr1, sector 0 Dec 29 13:08:46 joe-laptop kernel: [104221.558911] usb 2-2.2: USB disconnect, address 16 Then when I plugged the drive back into the computer, I got: Dec 29 13:10:29 joe-laptop kernel: [104324.668320] usb 2-2.2: new high speed USB device using ehci_hcd and address 17 Dec 29 13:10:29 joe-laptop kernel: [104324.761702] usb 2-2.2: configuration #1 chosen from 1 choice Dec 29 13:10:29 joe-laptop kernel: [104324.762700] scsi8 : SCSI emulation for USB Mass Storage devices Dec 29 13:10:29 joe-laptop kernel: [104324.762935] usb-storage: device found at 17 Dec 29 13:10:29 joe-laptop kernel: [104324.762938] usb-storage: waiting for device to settle before scanning Dec 29 13:10:34 joe-laptop kernel: [104329.760521] usb-storage: device scan complete Dec 29 13:10:34 joe-laptop kernel: [104329.761344] scsi 8:0:0:0: CD-ROM TEAC CD-224E 1.7A PQ: 0 ANSI: 0 CCS Dec 29 13:10:34 joe-laptop kernel: [104329.767425] sr1: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Dec 29 13:10:34 joe-laptop kernel: [104329.767612] sr 8:0:0:0: Attached scsi CD-ROM sr1 Dec 29 13:10:34 joe-laptop kernel: [104329.767720] sr 8:0:0:0: Attached scsi generic sg2 type 5 Dec 29 13:10:34 joe-laptop kernel: [104330.141060] sr 8:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Dec 29 13:10:34 joe-laptop kernel: [104330.141069] sr 8:0:0:0: [sr1] Sense Key : Illegal Request [current] Dec 29 13:10:34 joe-laptop kernel: [104330.141077] Info fld=0x0, ILI Dec 29 13:10:34 joe-laptop kernel: [104330.141081] sr 8:0:0:0: [sr1] Add. Sense: Illegal mode for this track Dec 29 13:10:34 joe-laptop kernel: [104330.141090] sr 8:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 Dec 29 13:10:34 joe-laptop kernel: [104330.141106] end_request: I/O error, dev sr1, sector 0 Dec 29 13:10:34 joe-laptop kernel: [104330.141113] __ratelimit: 18 callbacks suppressed There was more output than this (the number of lines started growing after the drive was plugged back in, and kept growing), but this is the first few lines.

    Read the article

  • Download YouTube Videos the Easy Way

    - by Trevor Bekolay
    You can’t be online all the time, and despite the majority of YouTube videos being nut-shots and Lady Gaga parodies, there is a lot of great content that you might want to download and watch offline. There are some programs and browser extensions to do this, but we’ve found that the easiest and quickest method is a bookmarklet that was originally posted on the Google Operating System blog (it’s since been removed). It will let you download standard quality and high-definition movies as MP4 files. Also, because it’s a bookmarklet, it will work on any modern web browser, and on any operating system! Installing the bookmarket is easy – just drag and drop the Get YouTube video link below to the bookmarks bar of your browser of choice. If you’ve hidden the bookmark bar, in most browsers you can right-click on the link and save it to your bookmarks. Get YouTube video   With the bookmarklet available in your browser, go to the YouTube video that you’d like to download. Click on the Get YouTube video link in your bookmarks bar, or in the bookmarks menu, wherever you saved it earlier. You will notice some new links appear below the description of the video. If you download the standard definition file, it will save as “video.mp4” by default. However, if you download the high definition file, it will save with the same name as the title of the video. There are many methods of downloading YouTube videos…but we think this is the easiest and quickest method. You don’t have to install anything or use up resources, but you can still get a link to download an MP4 with one click. Do you use a different method to download Youtube videos? Let us know about it in the comments! javascript:(function(){if(document.getElementById(’download-youtube-video’))return;var args=null,video_title=null,video_id=null,video_hash=null;var download_code=new Array();var fmt_labels={‘18′:’standard%20MP4′,’22′:’HD%20720p’,'37′:’HD%201080p’};try{args=yt.getConfig(’SWF_ARGS’);video_title=yt.getConfig(’VIDEO_TITLE’)}catch(e){}if(args){var fmt_url_map=unescape(args['fmt_url_map']);if(fmt_url_map==”)return;video_id=args['video_id'];video_hash=args['t'];video_title=video_title.replace(/[%22\'\?\\\/\:\*%3C%3E]/g,”);var fmt=new Array();var formats=fmt_url_map.split(’,');var format;for(var i=0;i%3Cformats.length;i++){var format_elems=formats[i].split(’|');fmt[format_elems[0]]=unescape(format_elems[1])}for(format in fmt_labels){if(fmt[format]!=null){download_code.push(’%3Ca%20href=\”+(fmt[format]+’&title=’+video_title)+’\'%3E’+fmt_labels[format]+’%3C/a%3E’)}elseif(format==’18′){download_code.push(’%3Ca%20href=\’http://www.youtube.com/get_video?fmt=18&video_id=’+video_id+’&t=’+video_hash+’\'%3E’+fmt_labels[format]+’%3C/a%3E’)}}}if(video_id==null||video_hash==null)return;var div_embed=document.getElementById(’watch-embed-div’);if(div_embed){var div_download=document.createElement(’div’);div_download.innerHTML=’%3Cbr%20/%3E%3Cspan%20id=\’download-youtube-video\’%3EDownload:%20′+download_code.join(’%20|%20′)+’%3C/span%3E’;div_embed.appendChild(div_download)}})() Similar Articles Productive Geek Tips Watch YouTube Videos in Cinema Style in FirefoxDownload YouTube Videos with Cheetah YouTube DownloaderStop YouTube Videos from Automatically Playing in FirefoxImprove YouTube Video Viewing in Google ChromeConvert YouTube Videos to MP3 with YouTube Downloader TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

    Read the article

  • SQLAuthority News – Android Efficiency Tips and Tricks – Personal Technology Tip #003

    - by pinaldave
    I use my phone for lots of things.  I use it mainly to replace my tablet – I can e-mail, take and edit photos, and do almost everything I can do on a laptop with this phone.  And I am sure that there are many of you out there just like me.  I personally have a Galaxy S3, which uses the Android operating system, and I have decided to feature it as the third installment of my Technology Tips and Tricks series. 1) Shortcut to your favorite contacts on home screen Access your most-called contacts easily from your home screen by holding your finger on any empty spot on the home screen.  A menu will pop up that allows you to choose Shortcuts, and Contact.  You can scroll through your contact list and then just tap on the name of the person you want to be able to dial with a single click. 2) Keep track of your data usage Yes, we all should keep a close eye on our data usage, because it is very easy to go over our limits and then end up with a giant bill at the end of the month.  Never get surprised when you open that mobile phone envelope again.  Go to Settings, then Data Usage, and you can find a quick rundown of your usage, how much data each app uses, and you can even set alarms to let you know when you are nearing the limits.   Better yet, you can set the phone to stop using data when it reaches a certain limit. 3) Bring back Good Grammar We often hear proclamations about the downfall of written language, and how texting abbreviations, misspellings, and lack of punctuation are the root of all evil.  Well, we can show all those doomsdayers that all is not lost by bringing punctuation back to texting.  Usually we leave it off when we text because it takes too long to get to the screen with all the punctuation options.  But now you can hold down the period (or “full stop”) button and a list of all the commonly-used punctuation marks will pop right up. 4) Apps, Apps, Apps and Apps And finally, I cannot end an article about smart phones without including a list of my favorite apps.  Here are a list of my Top 10 Applications on my Android (not counting social media apps). Advanced Task Killer – Keeps my phone snappy by closing un-necessary apps WhatsApp - my favorite alternate to Text SMS Flipboard - my ‘timepass’ moments Skype – keeps me close to friends and family GoogleMaps - I am never lost because of this one thing Amazon Kindle – Books my best friends DropBox - My data always safe Pluralsight Player – Learning never stops for me Samsung Kies Air – Connecting Phone to Computer Chrome – Replacing default browser I have not included any social media applications in the above list, but you can be sure that I am linked to Twitter, Facebook, Google+, LinkedIn, and YouTube. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Android, Personal Technology

    Read the article

  • Wipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way

    - by The Geek
    Giving a computer to somebody else? Maybe you’re putting it out on Craigslist to sell to a stranger—either way, you’ll want to make sure that your drive is completely wiped, scrubbed, and clean of any personal data. Here’s the easy way to do it. If you only have access to an Ubuntu Live CD or thumb drive, you can actually use that instead if you prefer, and we’ve got you covered with a full guide to securely wiping your PC’s hard drive. Otherwise, keep reading. Wipe the Drive with DBAN Darik’s Boot and Nuke CD is the easiest way to permanently and totally destroy every bit of personal information on that drive—nobody is going to recover a thing once this is done. The first thing you’ll need to do is download a copy of the ISO image, and then burn it to a blank CD with something really useful like Imgburn. Just choose Burn image to Disc at the start screen, select the little file icon, grab the downloaded ISO, and then go. If you need a little more help, we’ve got you covered with a beginner’s guide to burning an ISO image. Once you’re done, stick the disc into the drive, start the PC up, and then once you boot to the DBAN prompt you’ll see a menu. You can pretty much ignore everything on here, and just type… autonuke And there you are, your disk is now being securely wiped. Once it’s all done, you can remove the CD, and then either pack the PC up to sell, or re-install Windows on there if you feel like it. More Advanced Method If you’re really paranoid, want to run a different type of wipe, or just like fiddling with the options, you can choose F3 or hit Enter at the prompt to head to the advanced selection screen. Here you can choose exactly which drive to wipe, or hit the M key to change the method. You’ll be able to choose between a bunch of different wipe options. The Quick Erase is all you really need though.   So there you are, easy PC wiping in one package. What about you? Do you make sure to wipe your old PCs before giving them away? Personally I’ve always just yanked out the hard drives before I got rid of an old PC, but that’s just me. Download DBAN from dban.org Similar Articles Productive Geek Tips Use an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveHow to Dispose of Old Computers ResponsiblyHow To Delete a VHD in Windows 7Speed up External USB Hard Drives in Windows VistaSpeed Up SATA Hard Drives in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites

    Read the article

  • Silverlight Cream for May 13, 2010 -- #861

    - by Dave Campbell
    In this Issue: Sigurd Snørteland, Jeff Prosise, DaveDev, Joe Zhou, Chris Eargle, John Papa(-2-, -3-), and David Anson(-2-). Shoutouts: In with the links I've listed below, Sigurd Snørteland also sent a link to this app he's working on which is actually pretty cool to see: ZuneLight. The code is not yet available. He also has a no-code demo of a Silverlight Media Center Pieter Voloshyn, Luiz Thadeu, and Jhun Iti have a very nice Silverlight image editor up: Thumba From SilverlightCream.com: WP7 - Silverlight on mobile Sigurd Snørteland submitted some links for me that have been translated to English from his blog. I hope the pages come out good because he's got a lot of good stuff on there. This one has a link to a presentation he did, and 4 projects you can load up in the emulator that he's converted to the phone: weather, worldclock, coverflow, and solitaire ... pretty cool... thanks for the links Sigurd! Understanding Page Orientation in Silverlight for Windows Phone Jeff Prosise has a really nice post up on page orientation in WP7 ... what it means to your app, how to detect it, and example code for what to do then... also love a quote by Jeff: "Silverlight for Windows Phone is the hottest thing since color TV" Why you should check out Expression Blend Behaviors when using Silverlight DaveDev has a post up describing Behaviors and why we should use them, plus tons of external links to resources, blogs, videos... all good stuff... Fiddler inspector for WCF Silverlight Polling Duplex and WCF RIA Joe Zhou announces and provides a link to a new Fiddler inspector that understands the framing in Polling Duplex and also raw binary xml and binary SOAP. Windows Phone Controls v0.7 Chris Eargle reports the release of Version 0.7 of the Windows Phone Controls project on CodePlex ... this includes a Pivot Control and a Panorama Control... both very nicely done. Binding to Silverlight ComboBox and Using SelectedValue, SelectedValuePath and DisplayMemberPath John Papa responds to a user question and put up a nice post about binding to a ComboBox and then go from the selected item to some other property ... code included No More Boxes! Exploring the PathListBox (Silverlight TV #25) Silverlight TV 25 went up on Tuesday ... thought it was going to be Thursday?? anyway ... John Papa and Adam Kinney are discussing the PathListBox and looking at some cool demos thereof. Exposing SOAP, OData, and JSON Endpoints for RIA Services (Silverlight TV 26) Since today IS Thursday, we have a new Silverlight TV, number 26, and John Papa is chatting with Deepesh Mohnani of the WCF RIA Services team about exposing all sorts of endpoints... should be something in there for everybody :) Workaround for a Silverlight data binding bug affecting various scenarios - including DataGrid+ContextMenu David Anson details the rabbit-trail he and others on the team followed in response to a problem reported via Twitter where the binding on a DataGrid seemed off by a row(!) ... weird but true, validated, and SL3/4 are bug-for-bug compatible with this too! ... But David wouldn't leave us there.. he also has a workaround. Sharing the code for a simple Silverlight 4 REST-based cloud-oriented file management app for Azure and S3 David Anson had an opportunity to build an app he's wanted to build for a while and shares it with us: Blobstore -- a small, lightweight Silverlight 4 application that acts as a basic front-end for the Windows Azure Simple Data Storage and the Amazon Simple Storage Service (S3) -- and remember I said he shared the source :) Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • SQLAuthority News – Android Efficiency Tips and Tricks – Personal Technology Tip

    - by pinaldave
    I use my phone for lots of things.  I use it mainly to replace my tablet – I can e-mail, take and edit photos, and do almost everything I can do on a laptop with this phone.  And I am sure that there are many of you out there just like me.  I personally have a Galaxy S3, which uses the Android operating system, and I have decided to feature it as the third installment of my Technology Tips and Tricks series. 1) Shortcut to your favorite contacts on home screen Access your most-called contacts easily from your home screen by holding your finger on any empty spot on the home screen.  A menu will pop up that allows you to choose Shortcuts, and Contact.  You can scroll through your contact list and then just tap on the name of the person you want to be able to dial with a single click. 2) Keep track of your data usage Yes, we all should keep a close eye on our data usage, because it is very easy to go over our limits and then end up with a giant bill at the end of the month.  Never get surprised when you open that mobile phone envelope again.  Go to Settings, then Data Usage, and you can find a quick rundown of your usage, how much data each app uses, and you can even set alarms to let you know when you are nearing the limits.   Better yet, you can set the phone to stop using data when it reaches a certain limit. 3) Bring back Good Grammar We often hear proclamations about the downfall of written language, and how texting abbreviations, misspellings, and lack of punctuation are the root of all evil.  Well, we can show all those doomsdayers that all is not lost by bringing punctuation back to texting.  Usually we leave it off when we text because it takes too long to get to the screen with all the punctuation options.  But now you can hold down the period (or “full stop”) button and a list of all the commonly-used punctuation marks will pop right up. 4) Apps, Apps, Apps and Apps And finally, I cannot end an article about smart phones without including a list of my favorite apps.  Here are a list of my Top 10 Applications on my Android (not counting social media apps). Advanced Task Killer – Keeps my phone snappy by closing un-necessary apps WhatsApp - my favorite alternate to Text SMS Flipboard - my ‘timepass’ moments Skype – keeps me close to friends and family GoogleMaps - I am never lost because of this one thing Amazon Kindle – Books my best friends DropBox - My data always safe Pluralsight Player – Learning never stops for me Samsung Kies Air – Connecting Phone to Computer Chrome – Replacing default browser I have not included any social media applications in the above list, but you can be sure that I am linked to Twitter, Facebook, Google+, LinkedIn, and YouTube. Reference: Pinal Dave (http://blog.SQLAuthority.com)   Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology Tagged: Android, Personal Technology

    Read the article

  • SQL SERVER – Understanding XML – Contest Win Joes 2 Pros Combo (USD 198) – Day 5 of 5

    - by pinaldave
    August 2011 we ran a contest where every day we give away one book for an entire month. The contest had extreme success. Lots of people participated and lots of give away. I have received lots of questions if we are doing something similar this month. Absolutely, instead of running a contest a month long we are doing something more interesting. We are giving away USD 198 worth gift every day for this week. We are giving away Joes 2 Pros 5 Volumes (BOOK) SQL 2008 Development Certification Training Kit every day. One copy in India and One in USA. Total 2 of the giveaway (worth USD 198). All the gifts are sponsored from the Koenig Training Solution and Joes 2 Pros. The books are available here Amazon | Flipkart | Indiaplaza How to Win: Read the Question Read the Hints Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India residents only) 2 Winners will be randomly selected announced on August 20th. Question of the Day: Is following XML a well formed XML Document? <?xml version=”1.0″?> <address> <firstname>Pinal</firstname> <lastname>Dave</lastname> <title>Founder</title> <company>SQLAuthority.com</company> </address> a) Yes b) No c) I do not know Query Hints: BIG HINT POST A common observation by people seeing an XML file for the first time is that it looks like just a bunch of data inside a text file. XML files are text-based documents, which makes them easy to read.  All of the data is literally spelled out in the document and relies on a just a few characters (<, >, =) to convey relationships and structure of the data.  XML files can be used by any commonly available text editor, like Notepad. Much like a book’s Table of Contents, your first glance at well-formed XML will tell you the subject matter of the data and its general structure. Hints appearing within the data help you to quickly identify the main theme (similar to book’s subject), its headers (similar to chapter titles or sections of a book), data elements (similar to a book’s characters or chief topics), and so forth. We’ll learn to recognize and use the structural “hints,” which are XML’s markup components (e.g., XML tags, root elements). The XML Raw and Auto modes are great for displaying data as all attributes or all elements – but not both at once. If you want your XML stream to have some of its data shown in attributes and some shown as elements, then you can use the XML Path mode. If you are using an XML Path stream, then by default all values will be shown as elements. However, it is possible to pick one or more elements to be shown with an attribute(s) as well. Additional Hints: I have previously discussed various concepts from SQL Server Joes 2 Pros Volume 5. SQL Joes 2 Pros Development Series – OpenXML Options SQL Joes 2 Pros Development Series – Preparing XML in Memory SQL Joes 2 Pros Development Series – Shredding XML SQL Joes 2 Pros Development Series – Using Root With Auto XML Mode SQL Joes 2 Pros Development Series – Using Root With Auto XML Mode SQL Joes 2 Pros Development Series – What is XML? SQL Joes 2 Pros Development Series – What is XML? – 2 Next Step: Answer the Quiz in Contact Form in following format Question - Answer Name of the country (The contest is open for USA and India) Bonus Winner Leave a comment with your favorite article from the “additional hints” section and you may be eligible for surprise gift. There is no country restriction for this Bonus Contest. Do mention why you liked it any particular blog post and I will announce the winner of the same along with the main contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Unreal Tournament 3 vs UDK: What Should I Choose?

    - by Matt Christian
    Many people in the mod community were very excited to see the release of the Unreal Developer Kit (UDK) a few months ago.  Along with generating excitement into a very dedicated community, it also introduced many new modders into a flourishing area of indie-development.  However, since UDK is free, most beginners jump right into UDK, which is OK though you might just benefit more from purchasing a shelf-copy of Unreal Tournament 3. UDK UDK is a free full version of UnrealEd (the editor environment used to create games like Gears of War 1/2, Bioshock 1/2, and of course Unreal Tournament 3).  The editor gives you all the features of the editor from the shelf-copy of the game plus some refinements in many of the tools.  (One of the first things you'll find about UnrealEd is that it's a collection of tools grouped into the same editor so it really isn't a single 'tool') Interestingly enough, Epic is allowing you to sell any game made in UDK with a few catches.  First off, you must purchase a liscense for your game (which, I THINK is aproximately $99 starting).  Secondly, you must pay 25% of all profits for the first $5,000 of your game revenue to them (about $1250).  Finally, you cannot use any of the 'media' provided in UDK for your game.  UDK provides sample meshes, textures, materials, sounds, and other sample pieces of media pulled (mostly) from Unreal Tournament 3. The final point here will really determine whether you should use UDK.  There is a very small amount of media provided in UDK for someone to go in and begin creating levels without first developing your own meshes, textures, and other media.  Sure, you can slap together a few unique levels, though you will end up finding yourself restriced to the same items over and over and over.  This is absolutely how professional game development is; you are 'given' (typically liscensed or built in-house) an engine/editor and you begin creating all the content for the game and placing it.  UDK is aimed toward those who really want to build their game content from scratch with a currently existing engine.  It is not suited for someone who would like to simply build levels and quick mods without learning external 3D programs and image editing software. Unreal Tournament 3 Unless you have a serious grudge against FPS's, Epic, or your computer sucks, there really is no reason not to own this game for PC.  You can pick it up on Steam or Amazon for around $20 brand new.  Not only are you provided with a full single-player and multiplayer game, but you are given the entire UnrealEd 3.0 including all of the content used to build UT3.  If you want to start building levels and mods quickly for UT3, you should absolutely pick up a shelf-copy. However, as off-the-shelf UT3 is a few years old now, the tools have not been updated for quite a while.  Compared to UDK, the menus are more difficult to navigate through and take more time getting used to.  Since UDK is updated almost every month, there are new inclusions to the editor that may not be in UT3 (including the future addition of 3D!).  I haven't worked enough with shelf UT3 to see if there are more features in UDK or if they both feature the same stuff in different forms, however you should remember that the Unreal Engine 3.0 has undergone numerous upgrades between it's launch and Gears of War 2 (in fact, Epic had a conference to show off what changed just between the Gears of Wars games). Since UT3 has much more core content, someone who wants to focus on level editing or modding the core UT3 game may find their needs better suited with an off-the-shelf copy of UT3.  If that level designer has a team that is generating custom assets, they may be better off with UDK. The choice is now yours...

    Read the article

  • SQL SERVER – Identity Fields – Contest Win Joes 2 Pros Combo (USD 198) – Day 2 of 5

    - by pinaldave
    August 2011 we ran a contest where every day we give away one book for an entire month. The contest had extreme success. Lots of people participated and lots of give away. I have received lots of questions if we are doing something similar this month. Absolutely, instead of running a contest a month long we are doing something more interesting. We are giving away USD 198 worth gift every day for this week. We are giving away Joes 2 Pros 5 Volumes (BOOK) SQL 2008 Development Certification Training Kit every day. One copy in India and One in USA. Total 2 of the giveaway (worth USD 198). All the gifts are sponsored from the Koenig Training Solution and Joes 2 Pros. The books are available here Amazon | Flipkart | Indiaplaza How to Win: Read the Question Read the Hints Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India residents only) 2 Winners will be randomly selected announced on August 20th. Question of the Day: Which of the following statement is incorrect? a) Identity value can be negative. b) Identity value can have negative interval. c) Identity value can be of datatype VARCHAR d) Identity value can have increment interval larger than 1 Query Hints: BIG HINT POST A simple way to determine if a table contains an identity field is to use the SSMS Object Explorer Design Interface. Navigate to the table, then right-click it and choose Design from the pop-up window. When your design tab opens, select the first field in the table to view its list of properties in the lower pane of the tab (In this case the field is ProductID). Look to see if the Identity Specification property in the lower pane is set to either yes or no. SQL Server will allow you to utilize IDENTITY_INSERT with just one table at a time. After you’ve completed the needed work, it’s very important to reset the IDENTITY_INSERT back to OFF. Additional Hints: I have previously discussed various concepts from SQL Server Joes 2 Pros Volume 2. SQL Joes 2 Pros Development Series – Output Clause in Simple Examples SQL Joes 2 Pros Development Series – Ranking Functions – Advanced NTILE in Detail SQL Joes 2 Pros Development Series – Ranking Functions – RANK( ), DENSE_RANK( ), and ROW_NUMBER( ) SQL Joes 2 Pros Development Series – Advanced Aggregates with the Over Clause SQL Joes 2 Pros Development Series – Aggregates with the Over Clause SQL Joes 2 Pros Development Series – Overriding Identity Fields – Tricks and Tips of Identity Fields SQL Joes 2 Pros Development Series – Many to Many Relationships Next Step: Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India) Bonus Winner Leave a comment with your favorite article from the “additional hints” section and you may be eligible for surprise gift. There is no country restriction for this Bonus Contest. Do mention why you liked it any particular blog post and I will announce the winner of the same along with the main contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • PHP Web Services - Nice try

    Thanks to the membership in the O'Reilly User Group Programme the Mauritius Software Craftsmanship Community (short: MSCC) recently received a welcome package with several book titles. Among them is the latest publication of Lorna Jane Mitchell - 'PHP Web Services: APIs for the Modern Web'. Following is the book review I put on Amazon: Nice try! Initially, I was astonished that a small book like 'PHP Web Services' would be able to cover all the interesting topics about APIs and Web Services, independently whether they are written in PHP or not. And unfortunately, the title isn't able to stand up to the readers (or at least my) expectations. Maybe as a light defense, there is no usual paragraph about the intended audience of that book, but still I have to admit that the first half (chapters 1 to 8) are well written and Lorna has her points on the various technologies. Also, the code samples in PHP are clean and easy to understand. With chapter 'Debugging Web Services' the book started to change my mind about the clarity of advice and the instructions on designing and developing good APIs. Eventually, this might be related to the fact that I'm used to other tools since years, like Telerik Fiddler as HTTP proxy in order to trace and inspect any kind of request/response handling. Including localhost monitoring, SSL certification acceptance, and the ability to debug mobile devices, especially iOS-based ones. Compared to Charles, Fiddler is available for free. What really got me off the hook is the following statement in chapter 10 about Service Type Decisions: "For users who have larger systems using technology stacks such as Java, C++, or .NET, it may be easier for them to integrate with a SOAP service." WHAT? A couple of pages earlier the author recommends to stay away from 'old-fashioned' API styles like SOAP (if possible). And on top of that I wonder why there are tons of documentation towards development of RESTful Web Services based on WebAPI. The ASP.NET stack clearly moves away from SOAP to JSON and REST since years! Honestly, as a software developer on the .NET stack this leaves a mixed feeling after all. As for the remaining chapters I simply consider them as 'blah blah' without any real value and lots of theoretical advice. Related to the chapter 13 about 'Documentation', I just had the 'pleasure' to write a C#-based client against a Java-based SOAP Web Service. Personally, I take the WSDL as the master reference in the first place and Visual Studio generates all the stub types involved in the communication. During the implementation and testing I came across a 'java.lang.NullPointerException' in various methods and for various method parameters. The WSDL and the generated types were declared as Nullable, so nothing to worry about, or? Well, I logged in a support ticket, and guess what was the response to that scenario? "The service definition in the WSDL is wrong, please refer to the documentation in order to use the methods and parameters correctly" - No comment! Lorna's title is a quick read and in some areas she has good advice on designing and implementing Web Services and APIs. But roughly 100 pages aren't enough to cover a vast topic like that. After all, nice try and I'm looking forward to an improved second edition. Honestly, I never thought that I would come across a poor review. In general, it's a good book but it clearly has a lack of depth, the PHP code samples are incomplete (closing tags missing), and there are too many assumptions and theoretical statements.

    Read the article

  • F# in ASP.NET, mathematics and testing

    - by DigiMortal
    Starting from Visual Studio 2010 F# is full member of .NET Framework languages family. It is functional language with syntax specific to functional languages but I think it is time for us also notice and study functional languages. In this posting I will show you some examples about cool things other people have done using F#. F# and ASP.NET As I am ASP/ASP.NET MVP I am – of course – interested in how people use different languages and technologies with ASP.NET. C# MVP Tomáš Petrícek writes about developing ASP.NET MVC applications using F#. He also shows how to use LINQ To SQL in F# (using F# PowerPack) and provides sample solution and Visual Studio 2010 template for F# MVC web applications. You may also find interesting how you can create controllers in F#. Excellent work, Tomáš! Vladimir Matveev has interesting example about how to use F# and ApplicationHost class to process ASP.NET requests ouside of IIS. This is simple and very straight-forward example and I strongly suggest you to take a look at it. Very cool example is project Strom in Codeplex. Storm is web services testing tool that is fully written on F#. Take a look at this site because Codeplex offers also source code besides binaries. Math Functional languages are strong in fields like mathematics and physics. When I wrote my C# example about BigInteger class I found out that recursive version of Fibonacci algorithm in C# is not performing well. In same time I made same experiment on F# and in F# there were no performance problems with recursive version. You can find F# version of Fibonacci algorithm from Bob Palmer’s blog posting Fibonacci numbers in F#. Although golden spiral is useful for solving many problems I looked for some practical code example and found one. Kean Walmsley published in his Through the Interface blog very interesting posting Creating Fibonacci spirals in AutoCAD using F#. There are also other cool examples you may be interested in. Using numerical components by Extreme Optimization  it is possible to make some numerical integration (quadrature method) using F# (also C# example is available). fsharp.it introduces factorials calculation on F#. Robert Pickering has made very good work on programming The Game of Life in Silverlight and F# – I definitely suggest you to try out this example as it is very illustrative too. Who wants something more complex may take a look at Newton basin fractal example in F# by Jonathan Birge. Testing After some searching and surfing I found out that there is almost everything available for F# to write tests and test your F# code. FsCheck - FsCheck is a port of Haskell's QuickCheck. Important parts of the manual for using FsCheck is almost literally "adapted" from the QuickCheck manual and paper. Any errors and omissions are entirely my responsibility. FsTest - This project is designed to Language Oriented Programming constructs around unit testing and behavior testing in F#. The goal of this project is to create a Domain Specific Language for testing F# code in a way that makes sense for functional programming. FsUnit - FsUnit makes unit-testing with F# more enjoyable. It adds a special syntax to your favorite .NET testing framework. xUnit.NET - xUnit.net is a developer testing framework, built to support Test Driven Development, with a design goal of extreme simplicity and alignment with framework features. It is compatible with .NET Framework 2.0 and later, and offers several runners: console, GUI, MSBuild, and Visual Studio integration via TestDriven.net, CodeRush Test Runner and Resharper. It also offers test project integration for ASP.NET MVC. Getting started Well, as a first thing you need Visual Studio 2010. Then take a look at these resources: F# samples @ MSDN Microsoft F# Developer Center @ MSDN F# Language Reference @ MSDN F# blog F# forums Real World Functional Programming: With Examples in F# and C# (Amazon) Happy F#-ing! :)

    Read the article

  • SQL SERVER – Expanding Views – Contest Win Joes 2 Pros Combo (USD 198) – Day 4 of 5

    - by pinaldave
    August 2011 we ran a contest where every day we give away one book for an entire month. The contest had extreme success. Lots of people participated and lots of give away. I have received lots of questions if we are doing something similar this month. Absolutely, instead of running a contest a month long we are doing something more interesting. We are giving away USD 198 worth gift every day for this week. We are giving away Joes 2 Pros 5 Volumes (BOOK) SQL 2008 Development Certification Training Kit every day. One copy in India and One in USA. Total 2 of the giveaway (worth USD 198). All the gifts are sponsored from the Koenig Training Solution and Joes 2 Pros. The books are available here Amazon | Flipkart | Indiaplaza How to Win: Read the Question Read the Hints Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India residents only) 2 Winners will be randomly selected announced on August 20th. Question of the Day: Which of the following key word will force the query to use indexes created on views? a) ENCRYPTION b) SCHEMABINDING c) NOEXPAND d) CHECK OPTION Query Hints: BIG HINT POST Usually, the assumption is that Index on the table will use Index on the table and Index on view will be used by view. However, that is the misconception. It does not happen this way. In fact, if you notice the image, you will find the both of them (table and view) use both the index created on the table. The index created on the view is not used. The reason for the same as listed in BOL. The cost of using the indexed view may exceed the cost of getting the data from the base tables, or the query is so simple that a query against the base tables is fast and easy to find. This often happens when the indexed view is defined on small tables. You can use the NOEXPAND hint if you want to force the query processor to use the indexed view. This may require you to rewrite your query if you don’t initially reference the view explicitly. You can get the actual cost of the query with NOEXPAND and compare it to the actual cost of the query plan that doesn’t reference the view. If they are close, this may give you the confidence that the decision of whether or not to use the indexed view doesn’t matter. Additional Hints: I have previously discussed various concepts from SQL Server Joes 2 Pros Volume 4. SQL Joes 2 Pros Development Series – Structured Error Handling SQL Joes 2 Pros Development Series – SQL Server Error Messages SQL Joes 2 Pros Development Series – Table-Valued Functions SQL Joes 2 Pros Development Series – Table-Valued Store Procedure Parameters SQL Joes 2 Pros Development Series – Easy Introduction to CHECK Options SQL Joes 2 Pros Development Series – Introduction to Views SQL Joes 2 Pros Development Series – All about SQL Constraints Next Step: Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India) Bonus Winner Leave a comment with your favorite article from the “additional hints” section and you may be eligible for surprise gift. There is no country restriction for this Bonus Contest. Do mention why you liked it any particular blog post and I will announce the winner of the same along with the main contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • How to convert from amateur web app developer to professional web apper?

    - by Nilesh
    This is more of a practical question on web app development and deployment process. Here is some background information. I use PHP for server side scripting, javascript for client side. I use Netbeans and notepad++. I user Firefox and firebug for debugging and testing. The process I use is very amateurish, I code something in netbeans, something in notepad++ and since there is nothing to compile, I just refresh the firefox browser and test it. This is convenient and faster compared to the Java development enviornment where you would have to atleast compile and deploy the jar files before you could run them. I have been thinking of putting a formal process in my development and find it hard putting it together. There are so many things to do before you can deploy your final web app. I keep hearing jslint, compression, unit testing (selenium), Ant, YUI compressor etc but I am now looking for some steps that I can take to make me more organized. For e.g I use netbeans but don't use any projects within it. I directly update the files. I don't use any source control but use my Iomega backup that saves each save into a different version and at the end of the day I backup the dev directory to my Amazon s3 account. For me development environment is just a DEV directory, TEST is my intermediate stage and PROD is the final directory that gets pushed out to the server. But all these directories are in the same apache home. I have few php scripts that just copies the needed files into the production directory. Thats about it for my development approach. I know I am missing the following - Regression testing (manual or automated ??) - automated testing (selenium ??) - automated deployment (ANT ??) - source control (svn ??) - quality control (jslint ??) Can someone explain what are the missing steps and how to go about filling those steps in order to have more professional approach. I am looking for tools with example tutorials in streamlining the whole development to deployment stage. For me just getting a hang of database, server side and client side development all in synchronization was itself a huge accomplishment. And now I feel there is lot missing before you can produce quality web application. For e.g I see lot of mention about using automated testing but how to put in use with respect to javascript and php. How to use ANT for the deployment etc. Is this all too much for a single or two person development team? Is there a way to automate all the above so that I just keep coding in netbeans and then run a batch file that is configured once and run it everytime to produce the code in the production directory? Lot of these information is scattered on the web and here, if someone can guide I would be happy to consolidate here. Thank you for your patience :)

    Read the article

  • How To Quickly Reboot Directly from Windows 7 to XP, Vista, or Ubuntu

    - by The Geek
    One of the biggest annoyances with a dual-boot system is having to wait for your PC to reboot to select the operating system you want to switch to, but there’s a simple piece of software that can make this process easier. This guest article was written by Ryan Dozier from the Doztech tech blog. With a small piece of software called iReboot we can skip the above step all together and instantly reboot into the operating system we want right from Windows. Their description says: “Instead of pressing restart, waiting for Windows to shut down, waiting for your BIOS to post, then selecting the operating system you want to boot into (within the bootloader time-limit!); you just select that entry from iReboot and let it do the rest!” Don’t worry about iReboot reconfiguring  your bootloader or any dual boot configuration you have. iReboot will only boot the selected operating system once and go back to your default settings. Using iReboot iReboot is quick and easy to install. Just download it, link below, run through the setup and select the default configuration. iReboot will automatically figure out what operating systems you have installed and appear in the taskbar. Go over to the taskbar and right click on the iReboot icon and select which operating system you want to reboot into. This method will add a check mark on the operating system you want to boot into. On your next reboot the system will automatically load your choice and skip the Windows Boot Manager. If you want to reboot automatically just select “Reboot on Selection” in the iReboot menu.   To be even more productive, you can install iReboot into each Windows operating system to quickly access the others with a few simple clicks.   iReboot does not work in Linux so you will have to reboot manually. Then wait for the Windows Boot Manager to load and select your operating system.   Conclusion iReboot works on  Windows XP, Windows Vista,  and Windows 7 as well as 64 bit versions of these operating systems. Unfortunately iReboot is only available for Windows but you can still use its functionality in Windows to quickly boot up your Linux machine. A simple reboot in Linux will take you back to Windows Boot Manager. Download iReboot from neosmart.net Editor’s note: We’ve not personally tested this software over at How-To Geek, but Neosmart, the author of the software, generally makes quality stuff. Still, you might want to test it out on a test machine first. If you’ve got any experience with this software, please be sure to let your fellow readers know in the comments. Similar Articles Productive Geek Tips Restart the Ubuntu Gnome User Interface QuicklyKeyboard Ninja: 21 Keyboard Shortcut ArticlesTest Your Computer’s Memory Using Windows Vista Memory Diagnostic ToolEnable or Disable UAC From the Windows 7 / Vista Command LineSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

    Read the article

  • SQL SERVER – Query Hint – Contest Win Joes 2 Pros Combo (USD 198) – Day 1 of 5

    - by pinaldave
    August 2011 we ran a contest where every day we give away one book for an entire month. The contest had extreme success. Lots of people participated and lots of give away. I have received lots of questions if we are doing something similar this month. Absolutely, instead of running a contest a month long we are doing something more interesting. We are giving away USD 198 worth gift every day for this week. We are giving away Joes 2 Pros 5 Volumes (BOOK) SQL 2008 Development Certification Training Kit every day. One copy in India and One in USA. Total 2 of the giveaway (worth USD 198). All the gifts are sponsored from the Koenig Training Solution and Joes 2 Pros. The books are available here Amazon | Flipkart | Indiaplaza How to Win: Read the Question Read the Hints Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India residents only) 2 Winners will be randomly selected announced on August 20th. Question of the Day: Which of the following queries will return dirty data? a) SELECT * FROM Table1 (READUNCOMMITED) b) SELECT * FROM Table1 (NOLOCK) c) SELECT * FROM Table1 (DIRTYREAD) d) SELECT * FROM Table1 (MYLOCK) Query Hints: BIG HINT POST Most SQL people know what a “Dirty Record” is. You might also call that an “Intermediate record”. In case this is new to you here is a very quick explanation. The simplest way to describe the steps of a transaction is to use an example of updating an existing record into a table. When the insert runs, SQL Server gets the data from storage, such as a hard drive, and loads it into memory and your CPU. The data in memory is changed and then saved to the storage device. Finally, a message is sent confirming the rows that were affected. For a very short period of time the update takes the data and puts it into memory (an intermediate state), not a permanent state. For every data change to a table there is a brief moment where the change is made in the intermediate state, but is not committed. During this time, any other DML statement needing that data waits until the lock is released. This is a safety feature so that SQL Server evaluates only official data. For every data change to a table there is a brief moment where the change is made in this intermediate state, but is not committed. During this time, any other DML statement (SELECT, INSERT, DELETE, UPDATE) needing that data must wait until the lock is released. This is a safety feature put in place so that SQL Server evaluates only official data. Additional Hints: I have previously discussed various concepts from SQL Server Joes 2 Pros Volume 1. SQL Joes 2 Pros Development Series – Dirty Records and Table Hints SQL Joes 2 Pros Development Series – Row Constructors SQL Joes 2 Pros Development Series – Finding un-matching Records SQL Joes 2 Pros Development Series – Efficient Query Writing Strategy SQL Joes 2 Pros Development Series – Finding Apostrophes in String and Text SQL Joes 2 Pros Development Series – Wildcard – Querying Special Characters SQL Joes 2 Pros Development Series – Wildcard Basics Recap Next Step: Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India) Bonus Winner Leave a comment with your favorite article from the “additional hints” section and you may be eligible for surprise gift. There is no country restriction for this Bonus Contest. Do mention why you liked it any particular blog post and I will announce the winner of the same along with the main contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Database – Beginning with Cloud Database As A Service

    - by Pinal Dave
    I love my weekend projects. Everybody does different activities in their weekend – like traveling, reading or just nothing. Every weekend I try to do something creative and different in the database world. The goal is I learn something new and if I enjoy my learning experience I share with the world. This weekend, I decided to explore Cloud Database As A Service – Morpheus. In my career I have managed many databases in the cloud and I have good experience in managing them. I should highlight that today’s applications use multiple databases from SQL for transactions and analytics, NoSQL for documents, In-Memory for caching to Indexing for search.  Provisioning and deploying these databases often require extensive expertise and time.  Often these databases are also not deployed on the same infrastructure and can create unnecessary latency between the application layer and the databases.  Not to mention the different quality of service based on the infrastructure and the service provider where they are deployed. Moreover, there are additional problems that I have experienced with traditional database setup when hosted in the cloud: Database provisioning & orchestration Slow speed due to hardware issues Poor Monitoring Tools High network latency Now if you have a great software and expert network engineer, you can continuously work on above problems and overcome them. However, not every organization have the luxury to have top notch experts in the field. Now above issues are related to infrastructure, but there are a few more problems which are related to software/application as well. Here are the top three things which can be problems if you do not have application expert: Replication and Clustering Simple provisioning of the hard drive space Automatic Sharding Well, Morpheus looks like a product build by experts who have faced similar situation in the past. The product pretty much addresses all the pain points of developers and database administrators. What is different about Morpheus is that it offers a variety of databases from MySQL, MongoDB, ElasticSearch to Reddis as a service.  Thus users can pick and chose any combination of these databases.  All of them can be provisioned in a matter of minutes with a simple and intuitive point and click user interface.  The Morpheus cloud is built on Solid State Drives (SSD) and is designed for high-speed database transactions.  In addition it offers a direct link to Amazon Web Services to minimize latency between the application layer and the databases. Here are the few steps on how one can get started with Morpheus. Follow along with me.  First go to http://www.gomorpheus.com and register for a new and free account. Step 1: Signup It is very simple to signup for Morpheus. Step 2: Select your database   I use MySQL for my daily routine, so I have selected MySQL. Upon clicking on the big red button to add Instance, it prompted a dialogue of creating a new instance.   Step 3: Create User Now we just have to create a user in our portal which we will use to connect to a database hosted at Morpheus. Click on your database instance and it will bring you to User Screen. Over here you will notice once again a big red button to create a new user. I created a user with my first name.   Step 4: Configure your MySQL client I used MySQL workbench and connected to MySQL instance, which I had created with an IP address and user.   That’s it! You are connecting to MySQL instance. Now you can create your objects just like you would create on your local box. You will have all the features of the Morpheus when you are working with your database. Dashboard While working with Morpheus, I was most impressed with its dashboard. In future blog posts, I will write more about this feature.  Also with Morpheus you use the same process for provisioning and connecting with other databases: MongoDB, ElasticSearch and Reddis. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • OS Development. Only Few Particular Questions

    - by Total Anime Immersion
    I am new to this site as a member but have consulted its answers quite a lot of times. Besides my questions regarding OS Development hasn't been answered in any forum. In OS Dev. we make a bootloader. The org point is 7C00H. Why so? Why not 0000h? What are the last two signatures in the bootloader used for? People on every forum have answered that it is important for the system to recognize it as a bootable media. But I want a specific answer. What do each of those signatures do. I have the basic concept of a kernel. Point is.. it relates to different files required in a system. It sort of binds up everything that is individually developed. Now the thing is that that I have floating ideas in my mind regarding different aspects like keyboard, mouse, etc.. how do I put them all together? Which should I start with first? If possible please provide a step by step procedure of the startups of the kernel. Suppose I have developed my language entirely in C and Assembly. Now questions is will exe files work on my system.. if it doesn't then I have to create my own files and publish them. Which is a bad idea.. next step would be for me to go for a compiler for a language which I have designed myself. Now the point is.. How do I implement the compiler into my OS? After all this my final question is that.. How do you go about multitasking and multithreading? and I don't want to use int 21h as its dos specific.. how do I go about making files, renaming them, etc. and all assembly books teach 16 but programming.. how do i go about doing 32 bit or 64 bit with the knowledge I have.. if the basics and instructions are the same.. I don't mind.. but how do i go about otherwise? Don't tell me to give up the idea because I WON'T. And don't tell me it's too complex because I have a sharp knowledge of working of a system, C, Java, Assembly, C++ and python, C#, visual basic.. and not just basics but full fledged api developments.. but I really want to go deep into the systems part.. so I want professional help.. And I have gone through many OS project files but I want help particularly from this site as there are people with knowledge depth who can guide me the right way. And please don't suggest any books above 20$ and they should be available on flipkart as amazon charges massively for shipping and I prefer free shipping from flipkart.

    Read the article

  • Big Data – Data Mining with Hive – What is Hive? – What is HiveQL (HQL)? – Day 15 of 21

    - by Pinal Dave
    In yesterday’s blog post we learned the importance of the operational database in Big Data Story. In this article we will understand what is Hive and HQL in Big Data Story. Yahoo started working on PIG (we will understand that in the next blog post) for their application deployment on Hadoop. The goal of Yahoo to manage their unstructured data. Similarly Facebook started deploying their warehouse solutions on Hadoop which has resulted in HIVE. The reason for going with HIVE is because the traditional warehousing solutions are getting very expensive. What is HIVE? Hive is a datawarehouseing infrastructure for Hadoop. The primary responsibility is to provide data summarization, query and analysis. It  supports analysis of large datasets stored in Hadoop’s HDFS as well as on the Amazon S3 filesystem. The best part of HIVE is that it supports SQL-Like access to structured data which is known as HiveQL (or HQL) as well as big data analysis with the help of MapReduce. Hive is not built to get a quick response to queries but it it is built for data mining applications. Data mining applications can take from several minutes to several hours to analysis the data and HIVE is primarily used there. HIVE Organization The data are organized in three different formats in HIVE. Tables: They are very similar to RDBMS tables and contains rows and tables. Hive is just layered over the Hadoop File System (HDFS), hence tables are directly mapped to directories of the filesystems. It also supports tables stored in other native file systems. Partitions: Hive tables can have more than one partition. They are mapped to subdirectories and file systems as well. Buckets: In Hive data may be divided into buckets. Buckets are stored as files in partition in the underlying file system. Hive also has metastore which stores all the metadata. It is a relational database containing various information related to Hive Schema (column types, owners, key-value data, statistics etc.). We can use MySQL database over here. What is HiveSQL (HQL)? Hive query language provides the basic SQL like operations. Here are few of the tasks which HQL can do easily. Create and manage tables and partitions Support various Relational, Arithmetic and Logical Operators Evaluate functions Download the contents of a table to a local directory or result of queries to HDFS directory Here is the example of the HQL Query: SELECT upper(name), salesprice FROM sales; SELECT category, count(1) FROM products GROUP BY category; When you look at the above query, you can see they are very similar to SQL like queries. Tomorrow In tomorrow’s blog post we will discuss about very important components of the Big Data Ecosystem – Pig. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >