Search Results

Search found 13434 results on 538 pages for 'boot on power up'.

Page 108/538 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

  • 3TB non-boot hard disk on older motherboard

    - by Bcos
    It is time to expand the capacity of my Ubuntu home file server so I would like to purchase some 3TB hard disks. However, I am concerned with potential compatibility issues. I've tried searching around but I haven't found information which clearly addresses my particular situation. My server is running Ubuntu 10.04 on an Intel P35 chipset based system. The motherboard does not support UEFI (and, by extension, GPT?). However, Ubuntu does support 2TB disks. Will I be able to properly utilize these new disks, or does the motherboard limitation trump all else? The boot disk is <2TB and will not be updated nor am I dual-booting; these disks will be used strictly as slaves in a pure Ubuntu environment. I'd hate to pull the trigger on these new disks just to be unpleasantly surprised, so any feedback is appreciated. Thanks!

    Read the article

  • Multiple Problems Installing 12.04, now can't use Windows

    - by user87997
    First I tried using the 32-bit wubi.exe installer from the main Ubuntu website. It worked fine, dual booted with Windows 7 and all. I tried installing several applications and got errors. After searching for a little while for a fix, I found that someone else had solved the problem by uninstalling the 32-bit version and installing 64-bit Ubuntu. Apparently there is no wubi.exe installer for the 64-bit version, so I used LinuxLive to put the iso file onto a USB drive. I changed my the boot order in BIOS to check the USB first. It did, and I got into the Ubuntu installer just fine. Everything was working fine, but then I got an error that GRUB could not be installed. I chose "install manually later" or something like that. Immediately, the installer said it was done and ready for a reboot. At this point, my USB is still in the computer. The computer reboots...and it's back at the installer for the USB. I look up what's going on here, and someone says in a thread they solved it by selecting "Try Ubuntu" then installing it via a shortcut on the desktop. I assumed that Ubuntu simply hadn't installed and it would be safe to try again, so I did. It finished installing, this time I chose a different partition that wasn't being used. The thread also said to reinstall grub to the mounted drive, so I did that. Next I took out my USB and rebooted. I get stuck on the GRUB GNU loader, v.1.99 or something I believe it says at the top. I can't do anything, and it doesn't detect Windows 7 OR Ubuntu. When I check partitions, I have two 43 GB partitions that both have the same files in them (I'm assuming those are the two Ubuntu installations), and can only run Ubuntu off of my USB-- and can't run Windows 7 at all, however from within Ubuntu the windows 7 filesystem and files can still be seen. I have no idea what to do now. I used Ubuntu in the past (9.xx) and never had these sorts of problems! Please help. And sorry for the wall of text.

    Read the article

  • Full brightness and keyboard backligh at boot

    - by joelalmeidaptg
    I own an Asus N56VZ, and each time I start Ubuntu (13.10 and prior versions) my screen brightness and keyboard backlights reset their values to the max. Ubuntu doesn't save my settings on reboot. I was wondering if someone could help me with this? It is horrible when, at night, I turn on my computer - it is like looking directly to the sun, and it hurts my eyes. I tried googling and none of the pages I found actually helped. I think my issue might be grub-related. I have a dual-boot with Windows 8.1, so before I start my computer I see grub to choose my operating system. My screen starts at full brightness as soon as I reach grub. Maybe he is making the OS forget about my last values, overriding it with its? Does someone knows how to solve this? Thanks in advance :) PS: I'm using bumblebee with Nvidia driver 304, but this issue existed before I installed it.

    Read the article

  • Need Help with partitions and such Dual Booting 13.10 w/ windows 7

    - by Aymax
    so I've spent the past couple days freaking out about this and looking for answers, and I decided to resort to asking on forums. probably should have before I wasted 2 entire days. so I am trying to DUAL-INSTALL Ubuntu 13.10 with my x64 Windows 7 home premium computer. I have 6 gb of ram, 1TB hard drive, and a 3.3GHZ dual core processer (just in case it matters). I've managed to figure some things out. I've burned the ubuntu files onto a DVD, and I have been able to successfully run it off the disk. I also shrunk my Windows partition by 120Gb and partitioned that for Ubuntu (all using the windows Disk Manager). Problems: When I turn my computer on with the DVD in the tray, the computer cant find windows. it flashes a screen real quick that says something about not being able to find an operating system, and then goes to "grub" and asks what i want to do with Ubuntu. this scares me, because I don't know if that means that I will not be able to boot windows if I install Ubuntu. The Ubuntu 13.10 installer does not detect my Windows operating system. I only have the options to Erase everything on my drive, or "something else." I choose that, which brings me to 3 I don't understand the partition table. I have no idea which drive im selecting to install stuff on, much less which one to select. I tried to tell by the amount of memory partitioned off, but none of the numbers seem to be accurate. Plus, all the names are dev/sda(#). I know Ubuntu knows the name of my partition, because on the sidebars it shows the names of the different drives, including the partition I made; so why don't they use the names? I have no idea what I'm going to be erasing. I've read that I should know which is which by the file system type, but they are all NTFS, including the one I made. my only other option was FAT, none for EXT2 or any of that like people said to do. My main concerns are that of accidentally erasing windows or not being able to access windows. any feasible solution is helpful, weather it helps me with the install or to make Ubuntu see windows. I realize this question has been asked much, but i have found no feasible answers so far. I am relatively new to this, and have never installed an operating system before, so I do not know most of the jargon. please keep it relatively simple, please. I am not a programmer. Thanks.

    Read the article

  • Ubuntu 12.4 not listed while in boot menu

    - by radkrish
    I am using Dell Inspiron 17R with Windows7 as the primary OS to boot my system up. I am new to Linux and to begin with, I thought of installing Ubuntu 12.4 AMD 64 bit version on my laptop. Today I performed a successful installation on my laptop but when I reboot, it doesn't show me the Ubuntu OS in the list (I can only see Windows7). Is there any way to bring up the Ubuntu entry into this list? While installing I selected the option to have both Windows7 and Ubuntu OS on my laptop. The root drive for both OS is C: drive. Hence I split the drive into two (250 GB for Windows7 and 250 GB for Ubuntu). Now I can only see 250GB in my C:\ drive for Windows7. Is the remaining 250GB assigned to Ubuntu or did I lose that 250GB space?? Your answers will be highly appreciated..

    Read the article

  • low volume/dual boot

    - by user2367
    I have an intel Imac dual-booting Ubuntu 10.04 and OSX 10.6. Both work fine, but sound is very quiet in Linux, even though the gnome volume control panel and pulse audio volume control panels are both set to 100%. I can turn the speaker volume up and it's fine, but then when I boot back to OSX the volume makes me jump out of my skin. Is there a setting I'm missing? If I turn the gnome sound pref volume higher then 100, it tends to distort the sound. (crackling)

    Read the article

  • CellC data card not recognized if I boot with it in

    - by Armien
    In 11.10 I find that I can connect to the internet via broadband connection successfully. The problem is that I cannot have the data card attached to the machine while the machine boots up. If I leave the data card in the machine during startup, the data card is not picked up and I then cannot connect to the internet. I must first boot up my machine, login, attach the data card into the usb port, wait so 30 seconds. The broadband connection name will then appear in the network dropdown at the top of the screen. An internet connect is now possible via broadband. Please let me know what must be done to fix this.

    Read the article

  • PXE-E32 TFTP Open Timeout While Attempting to PXE Boot from Windows Deployment Services

    - by bschafer
    I'm running Windows Deployment Services on Windows Server 2008 R2 on top of an ESX 4.0 box. This is the only function of this VM instance, although it had previously functioned as an AD Domain Controller. My DHCP server is running on our primary Domain Controller, which is also Server 2008 R2, but running on metal. Everything was working perfectly until we recently had our backup generator fail during a power outage, causing all of our servers and networking equipment to lose power for a period of time. When we brought all of our equipment back up, everything was working as expected except for WDS. Our network is split up into several different vlans. Now, depending on which vlan the client computer is on, it's behaving differently when attempting to PXE boot into WDS. Our servers are located on the 10.55.x.x vlan, which, due to the nature of it, has no DHCP server active in it. The first computer we plugged in happened to be in the 10.99.x.x vlan, which is supposed to be reserved for network management devices (i.e. switches), but we've been using it occasionally otherwise. That computer gave us PXE-E11 ARP Timeout errors. When we moved to a different computer on the 10.19.x.x vlan (for general purpose use), it finally gets an IP from DHCP, but it presents us with a very stumping PXE-E32 TFTP Open Timeout error. Before the power outage, it didn't matter which vlan a device was on; it would PXE boot and image just fine. I've made no changes to anything server-side. Everything is configured exactly the same way it was on my WDS and DHCP servers as before the power outage. I've tried several different computers, including different models. All of this, combined with the quirky behavior depending on the vlan, makes me think something went wrong in one or more of our switches, probably because of the power outage. Unfortunately, I'm no network guy, and I know very little about how to configure our switches properly. Is this an issue with switches, etc? If so, how can I fix it? Is there some magical option I'm not aware of? Does anybody out there have any hunches? I've pretty much exhausted my ideas. Our main switch is an HP Procurve 5406. We also have 3x HP Procurve 4208 switches. The ESX Server is an HP ProLiant DL380 G6. The WDS VM is currently using the VMXNET3 network adaptor, but we've also tried the E1000 adaptor.

    Read the article

  • Server can't set IP after power outage

    - by Ali
    The power went out all of a sudden and when we tried to restart everything when it came back on - our server can't be assigned an IP? We got an error stating that the IP for the server was already in use by another system. We then shut down all systems and restarted the server but then for some reason the server was assigned an IP but no one could connect to it - after restarting the server after setting it to have a dynamically assigned ip - the server now has no ip - just 0.0.0.0 - running an ipconfig/renew or ipconfig /release has no effect.. what should we do!!

    Read the article

  • Connect a 2.5" (laptop hard disk) SATA hard disk to Desktop PC

    - by Lawliet
    Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected? I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V) I bought a all-in-one Modex-to-SATA power adapter and SATA cable and I still don't know what to do. I have read various forums and a lot of people are stating that it's perfectly ok, but some are scaring me that by connecting it so, it fried their hard disk. And some also mentioned cutting the yellow 12V wire if I'm planning to use Modex-to-SATA power. Thanks in advance

    Read the article

  • Connect a 2.5" (laptop hard disk) SATA hard disk to Desktop PC

    - by Lawliet
    Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected? I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V) I bought a all-in-one Modex-to-SATA power adapter and SATA cable and I still don't know what to do. I have read various forums and a lot of people are stating that it's perfectly ok, but some are scaring me that by connecting it so, it fried their hard disk. And some also mentioned cutting the yellow 12V wire if I'm planning to use Modex-to-SATA power. Thanks in advance

    Read the article

  • How to prevent laptop screen brightness from changing when un/plugging battery power

    - by Nomad
    When I am using my laptop, I continually adjust the screen's brightness based on the lighting conditions in the room (e.g. how much light is coming in from windows, etc.). But if I unplug the laptop or plug it back in, Windows looks at the default brightness setting in the power profile for "on battery" or "plugged in" and changes the brightness accordingly. This is a jarring experience and then I have to hunt down the ideal brightness for my current situation again, rather than getting on with my work. I would like to make it so that plugging or unplugging the battery is not a trigger that adjusts the screen brightness at all. The screen brightness should only change when I adjust it myself. Does anybody know how this might be accomplished?

    Read the article

  • How to make sure that grub does use menu.lst?

    - by Glen S. Dalton
    On my Ubuntu 9.04 ("Karmic") laptop I suspect grub does not use the /boot/grub/menu.lst file. What happens on boot is that I see a blank screen and nothing happens. When I press ESC I see a boot list which is different from what I would expect from the menu.lst file. The menu lines are different and when I choose the first entry it does not use the kernel options that are in the first entry in menu.lst. Where do the entries that grub uses come from? How can I find out what happens, is there a log? I could not find anything in /var/log/syslog or /var/log/dmesg about grub using a menu.lst. How can I set it to work like expected? Some Files: $ sudo ls -la /boot/grub/*lst -rw-r--r-- 1 root root 1558 2009-12-12 15:25 /boot/grub/command.lst -rw-r--r-- 1 root root 121 2009-12-12 15:25 /boot/grub/fs.lst -rw-r--r-- 1 root root 272 2009-12-12 15:25 /boot/grub/handler.lst -rw-r--r-- 1 root root 4576 2010-03-19 11:26 /boot/grub/menu.lst -rw-r--r-- 1 root root 1657 2009-12-12 15:25 /boot/grub/moddep.lst -rw-r--r-- 1 root root 62 2009-12-12 15:25 /boot/grub/partmap.lst -rw-r--r-- 1 root root 22 2009-12-12 15:25 /boot/grub/parttool.lst $ sudo ls -la /vm* lrwxrwxrwx 1 root root 30 2009-12-12 16:15 /vmlinuz -> boot/vmlinuz-2.6.31-16-generic lrwxrwxrwx 1 root root 30 2009-12-12 14:07 /vmlinuz.old -> boot/vmlinuz-2.6.31-14-generic $ sudo ls -la /init* lrwxrwxrwx 1 root root 33 2009-12-12 16:15 /initrd.img -> boot/initrd.img-2.6.31-16-generic lrwxrwxrwx 1 root root 33 2009-12-12 14:07 /initrd.img.old -> boot/initrd.img-2.6.31-14-generic The only menu.lst that I found: $ sudo find / -name "menu.lst" /boot/grub/menu.lst $ sudo cat /boot/grub/menu.lst # menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 3 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) #hiddenmenu # Pretty colours color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro noresume ## default grub root device ## e.g. groot=(hd0,0) # groot=70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 ## defoptions=quiet splash # defoptions=apm=on acpi=off ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## specify if running in Xen domU or have grub detect automatically ## update-grub will ignore non-xen kernels when running in domU and vice versa ## e.g. indomU=detect ## indomU=true ## indomU=false # indomU=detect ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 9.10, kernel 2.6.31-14-generic noresume uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro quiet splash apm=on acpi=off noresume initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, kernel 2.6.31-14-generic (recovery mode) uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /vmlinuz-2.6.31-14-generic root=UUID=9b454298-18e1-43f7-a5bc-f56e7ed5f9c6 ro sing le initrd /initrd.img-2.6.31-14-generic title Ubuntu 9.10, memtest86+ uuid 70fcd2b0-0ee0-4fe6-9acb-322ef74c1cdf kernel /memtest86+.bin ### END DEBIAN AUTOMAGIC KERNELS LIST These are the choices that grub displays after i press ESC: Ubuntu, Linux 2-6-31-16-generic Ubuntu, Linux 2-6-31-16-generic (recovery mode) Ubuntu, Linux 2-6-31-14-generic Ubuntu, Linux 2-6-31-14-generic (recovery mode) Memory test (memtest86+) Memory test (memtest86+, serial console 115200)

    Read the article

  • Controlling an amplifier power supply from Squeezebox/SqueezeCenter

    - by teabot
    I have a Squeezebox that is connected to an amplifier. I'd like the amplifier to switch on/off whenever the Squeezebox is powered on/off. I don't mind writing some plugin code to SqueezeCenter to do this but in hardware terms I am looking for off-the-shelf components. I imagine that I need some kind of Ethernet controlled power outlet. I have looked at X10 (I can't bring myself to link to their terrible site), but their product range seems extremely confused and it looks as though I'd have to use both RF and comms-over-mains to implement a computer controlled socket. Does anyone have any alternative suggestions? Note: Any components should be available and certified for use in the UK.

    Read the article

  • Stuck in power saving mode

    - by sazabi02
    I've got an LG monitor I tried attaching to my laptop for dual monitor goodness and it worked fine but when I tried attaching it back to the desktop it stuck in "Power Saving mode" and wouldn't go away. The CPU's starting up but nothing happens with the monitor. I try attaching it back to the laptop and it works fine again. I don't understand what could have happened. For reference, the laptop I'm using is an HP laptop with nVidia GT240M video card running on an i7 processor while the desktop runs on a Dual Core processor with an nVidia 9400GT video card. I've never had problems like these with other monitors I've attached my pc to. Anyone got any ideas?

    Read the article

  • Western Digital not recognized by Windows after power Outage on windows

    - by vikasde
    I have WD Essential Plus 1.5TB (formatted in NTFS). It was working fine under windows and mac mini. While it was connected to the mac mini, I had an power outage and now the HD is not being recognized under windows anymore. Now on the mac mini the HD is fine and I can see my data. When I use ActiveBootDisk under windows, then I can see the data as well. I updated the drivers on windows machine and also updated the firmware on the HD, but its still not being recognized. Is there any way for me to fix the HD under windows without having to re-format it?

    Read the article

  • Removing RAID on a DELL power-edge server

    - by Simon Callan
    We have a Dell Power-edge T110 server, with either a PERC S100 or S300 raid controller (I suspect S100), and 2 x 500GB SATA hard discs. These discs are running in RAID-1 configuration, (either 1 or 2 virtual discs), and on top of this, we have the C and D drives. As we are running low on disc space, we are looking at dropping the RAID to get some disc space back. Is it possible to split the discs back into 2 seperate hards discs that the OS can see, without losing all the data on the drives? Even better, would it be possible to split the D: drive, leaving the OS C: drive in RAID1 configuration?

    Read the article

  • Power User - archive Outlook mail items into SQL Server

    - by marc_s
    I am looking (and so far not finding any) for a solution to archive e-mail items from my Outlook into SQL Server. My PST is beginning to get really really big, and I'd love to extract my older e-mail into SQL Server in a way so I can still easily find mails if needed. I would prefer SQL Server as the storage medium since I'm familiar with it, and it's rock solid - I don't want to have a collection of PST files or CHM files or anything like that. Does anyone know of such a solution? I'm a power/home user - I can't afford $5'000 enterprise licenses - I need a sub-$100 solution for private use.

    Read the article

  • Laptop windows 7 power settings - screen display goes black after 1 minute

    - by Puneet Dudeja
    My laptop windows 7 power settings are not working since last week, i have tried using "Dim display after 5 hours" and "Dim Never" also, but my screen goes black after 1 minute. Any resolutions ? My laptop model is : Compaq Pressario CQ62 Graphics Card Information: Name Intel(R) HD Graphics PNP Device ID PCI\VEN_8086&DEV_0046&SUBSYS_1425103C&REV_02\3&11583659&0&10 Adapter Type Intel(R) HD Graphics (Core i3), Intel Corporation compatible Adapter Description Intel(R) HD Graphics Adapter RAM 1.21 GB (1,303,306,240 bytes) Installed Drivers igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32 Driver Version 8.15.10.2119 INF File oem17.inf (iILKM0 section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1366 x 768 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xD03FFFFF Memory Address 0xC0000000-0xCFFFFFFF I/O Port 0x00004050-0x00004057 IRQ Channel IRQ 4294967294 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\igdkmd64.sys (8.15.10.2119, 9.85 MB (10,326,784 bytes), 4/21/2010 6:18 PM) I am not able to solve my problem from any of the answers till now. The screen still goes dark and password screen appears after 1 minute of idle time.

    Read the article

  • Is there analog of aticonfig --set-powerstate for open source radeon driver?

    - by vava
    I'm running Ubuntu 9.04 on relatively old laptop with ATI Mobility x600 inside. On the last version of Ubuntu, when I was able to run proprietary fglrx driver, I was able to slow down graphic card by aticonfig --set-powerstate 1 and save some battery charge. Now I forced to run open source driver as ATI decided to drop support for old cards. But I can't find a way to control power states now except relying on DynamicClocks option in xorg.conf. But I really know better when and what powerstate I want, so is there a tool that let me change power state manually or at least let me somehow change the behavior of automatic power state selection?

    Read the article

  • Effects of enabling DVFS in a CPU

    - by Nrew
    I came up with this energy regulating software called Granola while reading at Ghacks.net I downloaded and installed the software but you need to enable the DVFS function in the CPU. I booted up and tried to enable DVFS in the CPU Configuration in my Asus motherboard(Desktop). But in the description it said that enabling the feature might raise some compatibility issues with the power supply. And I'm afraid that I might ruin the CPU if I do this. Any suggestions, any one here who has tried this before? I don't know who the manufacturer of my power supply is. Would you recommend some software that can determine every possible info about the power supply.

    Read the article

  • Linksys WRT54GS V6 Router Blinking Power Light

    - by Frank
    I have a Linksys WRT54GS V6 Router in my possession got it at my local goodwill for 5$. Upon start up the Power LED starts flashing like crazy and at the same time the Ethernet ports all light up once then turn off (DMZ and WLAN never turn on). I can ping the router only by setting a static IP on my Pc. I can also successfully push a file (official Linksys OS and DD-wrt) into it via TFTP but this currently does nothing (no 192.1681.1 Access). Any ideas as to what may be wrong? I think its pretty obvious that it's bricked but.. I keep hearing a whole lot of "if it pings it's fixable" on the internet.

    Read the article

  • Is the 4pin atx power plug required [closed]

    - by rockinthesixstring
    I know the answer is probably a resounding YES, but I just wanted to double check. I just purchased a new chassis for my PC and now my 4pin cpu power plug doesn't reach. I'm wondering if the 4 pins are required for operation, or can I get by for the weekend without it until I can go get an extension? EDIT: Looks like it is mandatory with my Mobo. I tried to post without it and i just got a blank screen. Looks like I'm getting a new adapter asap.

    Read the article

  • Windows 7 Wakeup from Sleep then Shutdown

    - by Kevin Hua
    Is this caused by low battery? I have an Asus UX31A, and I left it unattended. As usual, in 5 minutes, it went to sleep mode with the lid still open. I came back a couple hours later, and I noticed the laptop was off. I was still able to turn it on by manually pressing the power button (battery was at 2% though), but I don't understand why it shut off. If it was in sleep mode and the battery was near depletion, then wouldn't that result in a "Windows has recovered from an unexpected shutdown" upon boot? Does Windows have a mechanism to wake from sleep from a super critical battery level to shut down all programs and power down the system completely? I noticed that upon booting, firefox didn't give a fit about improper shutdown. Here are my power settings btw, powercfg -h off has been ran, so hibernation is off. And here is the event log: http://www.mediafire.com/download.php?lbfhl21g0nj2adi

    Read the article

  • Can you plug-in the battery while laptop is on AC only?

    - by Ivan Petrushev
    Hello, I'm using my laptop at home with battery removed and only connected to the AC power. However I'm lacking the mobility as my power cord is kinda short. Is it safe from electrical point of view to plug in the battery while the laptop is connected to AC and disconnect the AC power afterwards? What about the opposite side of the question - is it safe (or what the damage could be) if you work on battery, plug in the AC and unplug the battery? If there are differents for different models of laptops, I'm asking about IBM Lenovo T60. Is there such thing as a 'hot-plug battery'?

    Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >