Search Results

Search found 7706 results on 309 pages for 'checked'.

Page 108/309 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

  • Locate rogue DHCP server

    - by Farseeker
    I know this is a serious long shot, but here we go. In the past week or so, for users connected to a particular switch in our network (there are four dumb switches all connected, and it only affects SOME, not all, users on the one switch) are getting DHCP addresses from a rogue DHCP server. I have physically checked every cable plugged into the switch in question to make sure that none of them have a router or wifi point attached to it. I know the IP of the DHCP server, but I cannot ping it, and it does not have a web interface. Does anyone have any suggestions on what I can do to locate it or shut it down? Unfortuantely all the switches are unmanaged, and as mentioned, there's no physical device (that I can find) plugged in to anything. It's getting critical, because it's screwing up the PXE boot of a whole bunch of thin clients.

    Read the article

  • How to troubleshoot a remote wmi query/access failure?

    - by Roman
    Hi I'm using Powershell to query a remote computer in a domain for a wmi object, eg: "gwmi -computer test -class win32_bios". I get this error message: Value does not fall within the expected range Executing the query local under the same user works fine. It seems to happen on both windows 2003 and also 2008 systems. The user that runs the shell has admin rights on the local and remote server. I checked wmi and dcom permissions as far as I know how to do this, they seem to be the same on a server where it works, and another where it does not. I think it is not a network issue, all ports are open that are needed, and it also happens within the same subnet. When sniffing the traffic we see the following errors: RPC: c/o Alter Cont Resp: Call=0x2 Assoc Grp=0x4E4E Xmit=0x16D0 Recv=0x16D0 Warning: GssAPIMechanism is not found, either caused by not reassembled, conversation off or filtering. And an errormessage from Kerberos: Kerberos: KRB_ERROR - KDC_ERR_BADOPTION (13) The option code in the packet is 0x40830000 Any idea what I should look into?

    Read the article

  • Unable to connect to Adobe Connect

    - by ub3rst4r
    I am having troubles trying to connect my colleges Adobe Connect. I have done the test meeting connection and it will say "Unable to connect". I have tried connecting on 3 other computers and it works with flying colors. I am running Norton 360 on my computer and I also tried it on my other laptop thats also running Norton 360 and it works on that laptop. I also checked my hosts file and that is not the problem because I am able to connect to the server (on port 80) but not the Adobe Connect port (port 1935). The only thing in it is "127.0.0.1 localhost" Here are the details from the log that the test created: Player Version: WIN 11,3,300,271 App-Server returned: code:ok, servers=rtmp://connect.bowvalleycollege.ca:1935/_rtmp://localhost:8506/,rtmpt://connect.bowvalleycollege.ca:443/_rtmp://localhost:8506/ ERROR: FMS Server did not return correctly! Here is my specifications: Windows 7 SP1 x64 Norton 360 v6.3 (latest) It won't connect in Firefox v15, Chrome v19, or IE9 All of my computers are connected through the same router (D-Link DIR-625) Any ideas?

    Read the article

  • claws-mail suddenly does not recognize my .claws-mail folder

    - by Mala
    Hi I turned my computer on today like any other day, and fired up my email-client claws-mail. However, instead of showing me my inbox, it just pops up the new-account wizard, as though my .claws-mail folder did not exist! I've double-checked that it's there, and that it (seems to) contain everything that it should. I tried running claws-mail from the terminal to see if it returned any useful messages about why it couldn't find my email account, but no dice... For reference, this is CM version 3.7.2 running on Gentoo kernel 2.6.31-gentoo-r6 (x86_64) Any clues as to how to get my beloved inbox/config back? Thanks!

    Read the article

  • Weird files in User folder

    - by Nano8Blazex
    In my user folder (C:/Users/myAccount/) theres a set of interesting hidden files that I've never seen before (right now it's a fresh install of Windows 7 Ultimate). These are: NTUSER.DAT, ntuser.dat.LOG1, ntuser.dat.LOG2, and NTUSER.DAT(whole chain of numbers and letters).TM.bif, NTUSER.DAT(whole chain of numbers and letters).TMContaineretcetc.regtrans-ms, and another similar one. When I try to delete them, it says the system is using them. I've never seen these files before. Are they ok to delete? Or should I leave them in my home folder? I always keep "Show hidden files" as well as "Show System files" checked, since I prefer being able to see all the files on my computer. If I shouldn't delete them, is there at least a way to tidy them up a bit? Thanks.

    Read the article

  • New host, high load?

    - by dotancohen
    A few minutes ago I signed up at a new webhost. I have yet to move my sites over. Upon initial SSH connection, I checked the load and memory usage, they do seem rather higher than I would like: # uptime 12:06:51 up 71 days, 23:23, 1 user, load average: 9.02, 9.49, 9.45 # free total used free shared buffers cached Mem: 33014800 31927192 1087608 0 2384812 17729816 -/+ buffers/cache: 11812564 21202236 Swap: 16787916 8584 16779332 Is that a bit to packed? I'm only paying about $5 USD per month, so I don't expect <0.1 loads, but ~10 is worrisome. Is it not? Also, there is no /etc/issue file so I tried other methods to guess the OS: # uname -a Linux box358.bluehost.com 2.6.32-20120131.55.1.bh6.x86_64 #1 SMP Tue Jan 31 15:43:27 EST 2012 x86_64 x86_64 x86_64 GNU/Linux # which yum /usr/bin/yum # which apt-get # That looks like CentOS / RHEL 6.2 possibly?

    Read the article

  • Apache error_log showing which command output

    - by Unai Rodriguez
    Apache's error_log shows lines like the following: --- snip --- which: no ruby in (/sbin:/usr/sbin:/bin:/usr/bin) which: no locate in (/sbin:/usr/sbin:/bin:/usr/bin) which: no suidperl in (/sbin:/usr/sbin:/bin:/usr/bin) which: no get in (/sbin:/usr/sbin:/bin:/usr/bin) which: no fetch in (/sbin:/usr/sbin:/bin:/usr/bin) which: no links in (/sbin:/usr/sbin:/bin:/usr/bin) which: no lynx in (/sbin:/usr/sbin:/bin:/usr/bin) which: no lwp-mirror in (/sbin:/usr/sbin:/bin:/usr/bin) which: no lwp-download in (/sbin:/usr/sbin:/bin:/usr/bin) which: no kav in (/sbin:/usr/sbin:/bin:/usr/bin) --- end --- The architecture is: Internet - Load Balancer - Varnish - Apache There are several web servers behind the load balancer and I have checked at least one of them with rkhunter (link) and couldn't find anything suspicious. Versions: CentOS 5.7 Varnish 2.1.5 Apache 2.2.3 PHP 5.2.17 Does this mean that someone has executed the command which through Apache? How can that happen? Thank you so much.

    Read the article

  • CentOS 5.8 server, installed Web Server vs yum install httpd

    - by Shiro
    I would like to know, what is the different between, the build-in CentOS server web server vs I install manual with yum install httpd I am new in CentOS. I just installed my CentOS 5.8 Server with Web Server checked. With some Google Search with LAMP installation, they listed with yum install httpd I had check inside /etc/init.d/ already had httpd I try to run yum install httpd http-devel It shows not yet installed. What will happen if I install yum version? What should I do? What is the best practise? Should I remove the Web Server install by default with CentOS? My goal is install LAMP (PHP v5.2.17).

    Read the article

  • Memory Stick Controller is not compatible with this version of Windows.

    - by nona urbiz
    I'm getting this error message in the Action Center on Windows 7, and I can't seem to solve it through Windows or through searches on Google: RICOH R5C592 PCI-CardBus/IEEE-1394/SD Card/Memory Stick Controller is not compatible with this version of Windows. Thanks for any help PS. I wasn't sure if you're allowed to post questions like this, about proprietary software, but I checked the FAQ and it seemed ok. Response: The URL I am told to visit it this but I can't tell which I should choose that I am originally presented with, or what to put in to select, as I am not sure what input it is referring to.

    Read the article

  • slow query logging in mysql server

    - by Vinayak Mahadevan
    Hi I have installed MySQL Community Edition 5.1.41 on a windows 2000 server. In my.ini file I have enabled slow query logging and have redirected the output to a table.I have set the long_query_time to 10 seconds. Then after running some queries I checked up the slow query log table and found that all the queries which were executed have been logged and a file called database-slow.log has also been created in the data folder. Can anybody please tell me where I am going wrong. I am using the inbuilt innodb and not activated the innodb plugin. Thanks

    Read the article

  • Can not connect to telnet server

    - by BloodPhilia
    So, I can't use telnet to connect to any server but it works fine from a different computer. It just says it can't connect. I tried the following things: Disable firewall and AV protection. (Basically, there was no security feature left online) Telnet is set to "Trusted" in my AV protection. (Kaspersky Internet Security 2011) Using Putty to telnet, but apparently Putty's connection is also inhibited. (Says it can't connect to host) Disabling the telnet client in Control Panel and then re-enabling it. (Windows 7 Ultimate) hosts file is clean. Checked for nasties using MBAM and KIS 2011 as well as going though my HijackThis logs, nothing found. I can connect to the same machines/servers through the web browser, ping, tracert, etc. Only telnet seems to be blocked. Any other thoughts?

    Read the article

  • PHP Warning: PHP Startup: Unable to load dynamic library php_mysql.dll, Mac 10.6, Apache 2.2, php 5

    - by munchybunch
    I'm trying to use the PHP CLI, and when I enter something like php test.php in the command line it returns: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/extensions/no-debug-non-zts-20090626/php_mysql.dll' - dlopen(/usr/lib/php/extensions/no-debug-non-zts-20090626/php_mysql.dll, 9): image not found in Unknown on line 0 something test.php contains: <?php echo 'something'; ?> I checked /usr/lib/php/extensions/no-debug-non-zts-20090626/, and as expected the .dll file isn't there. I'm a complete beginner when it comes to this - what is happening, and how can I fix it? A search of my system for "php_msyql.dll" reveals nothing. Does it have to do with how I compiled it? I don't have the original version of php that came with the mac, I think - I may have reinstalled it somewhere along the way. Any help would be appreciated!

    Read the article

  • Mac OS X Server Open Directory does not push Software Update settings to clients

    - by joxl
    I have an Xserve G5 running Mac OS X Server 10.5.8 configured as an Open Directory master. I have also enabled and configured Software Update service on the machine. The SUS is configured to serve Tiger, Leopard and Snow Leopard clients (see http://discussions.apple.com/message.jspa?messageID=10297359#10297359) The clients bound to the OD are a variety of Mac's running OS X 10.4, 10.5 or 10.6. In Workgroup Manager, I have created 3 machine groups for each client OS. Each group is configured with a custom SUS URL, and the managed client computers are members accordingly (see http://discussions.apple.com/thread.jspa?messageID=10493154#10493154) My problem is that the server pushes the SUS settings to some of the client machines, but not all. When I first configured all this stuff on the server (a few weeks ago) I was closely monitoring a few of the client machines to confirm that they received the custom settings. I noticed that some of the clients (10.4/5/6 alike) seemed to get the settings immediately, others didn't show the new settings until after a reboot. As I said, results are mixed across OS's, but some clients will not "sync" at all. My immediate thought was to unbind/rebind the problematic machines. I did this on several client computers with no success. For example, today I was working on one of the Tiger clients. I noticed it was not pointed at my local SUS, so I checked the OD binding; it was fine. Just to be sure I unbound the machine. Next, I checked WM and confirmed the computer record was gone. I noticed the machine group still had a residual (broken?) member from the unbound client; I manually removed this. Finally, I re-bound the client to OD and re-added the machine to it's correct group in WM. Unfortunately, the client still pings apple's SUS for updates. Just to play it safe I rebooted the client, but to no avail, it will not see my local SUS. To confirm that there is nothing wrong with the server, or the client's connection to it, forcefully pointed the machine at my SUS: sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "$LOCAL_SUS_URL" and the machine successfully updated off my local server. Great, successful updates, but problem not solved. I've done exhaustive reading on discussions.apple.com (not saying I read everything, I'm just saying I have read a lot) without a good answer. The discouraging thing is that a lot of OD problems I've read about only result in the sysadmin completely reinstalling the server, or OD, or some other similarly heavy-handed operation. At this point, I am not willing to go that route. I still have hope that I can find the reason for this flaky behavior. If anyone can point me in a helpful direction it would be much appreciated. EDIT: Indeed, some files are being pushed to the client: # from client machine: $ sudo find /Library -type f -name com.apple.SoftwareUpdate.plist /Library/Managed Preferences/com.apple.SoftwareUpdate.plist /Library/Managed Preferences/username/com.apple.SoftwareUpdate.plist /Library/Preferences/com.apple.SoftwareUpdate.plist A few weeks ago, prior to my (previously mentioned) modifications, the SUS was still running "stock". Which meant it could not serve SL (10.6) machines. At that time, the Software Update settings were setup in WM under User Groups. This didn't make any sense because some users work on multiple machines with different OS's. Before creating Machine Groups in WM, I deleted all the SU settings from the User Group Preferences. This just makes the whole thing more confusing, because when I see a file here: /Library/Managed Preferences/username/com.apple.SoftwareUpdate.plist I assume it's still remaining from the "old" settings, because I wouldn't think a Machine Setting belongs there. Despite all the com.apple.SoftwareUpdate.plist hanging around under the Managed Preferences, why does the client machine still call home to Apple and not my SUS? # on client machine: $ date Tue Jan 25 17:01:46 EST 2011 $ softwareupdate --list Software Update Tool Copyright 2002-2005 Apple No new software available. switch terminals... # on server: $ tail -n1 /var/log/swupd/swupd_access_log 10.x.x.x - - [25/Jan/2011:15:54:29 -0500] XXXX POST "/cgi-bin/SoftwareUpdateServerStats" 200 13 ... Notice the date of the client softwareupdate and the latest access to the SUS server; the server never heard a peep from that client.

    Read the article

  • How to make sure my GPO are applied in the correct order

    - by Florent
    I'm deploying VMware player through a GPO, and I'd like to apply specific ACLs to the install folder, and to the D:\VMWARE folder I'm creating during the player install. I also have to add the vmware user account the "can log on locally" right. To do so, I've created a GPO whose scope is the same as my Vmware player install GPO. This GPO works well, BUT when applied at the same time as my deployment GPO, it seems to be applied before the deploy GPO, and then : - Cannot find the vmware user account - Cannot find the c:\program files\vmware folder - Cannot find the D:\vmware folder because none of them have already been created by the vmware player install. And the only way for me to apply my security GPO is to execute gpudate /force command manually, which i don't want to use (it's supposed to be an automatic install) I've checked the gpo processing order, my security GPO should be applied AFTER my install GPO (security GPO is number 1, deploy GPO is number to), but it don't seem to be the case. Does anyone got an idea to solve this ?

    Read the article

  • PostgreSQL timezone does not match system timezone

    - by Martin C.
    I have several PostgreSQL 9.2 installations where the timezone used by PostgreSQL is GMT, despite the entire system being "Europe/Vienna". I double-checked that postgresql.conf does not contain timezone setting, so according to the documentation it should fallback to the system's timezone. However, # su -s /bin/bash postgres -c "psql mydb" mydb=# show timezone; TimeZone ---------- GMT (1 row) mydb=# select now(); now ------------------------------- 2013-11-12 08:14:21.697622+00 (1 row) Any hints, where the GMT timezone could come from? The system user does not have TZ set and the /etc/timezone and /etc/timeinfo seem to be configured correctly. # cat /etc/timezone Europe/Vienna # date Tue Nov 12 09:15:42 CET 2013 Any hints are appreciated, thanks in advance!

    Read the article

  • OCS 2007 R2 Client not syncing Addrss book

    - by Noah
    I've checked online for most solution for this issue, but nothing seems to be working. When I check the log files on our OCS 2007 R2 server, it is identifying 25 users in the address book. However, when I try and force a sync with the clients, they do not update. I can find the users if I search for them, but they are not coming down by themselves. Is there anything I can check or force from the client side? There is no address book file locally to delete and re-force down.

    Read the article

  • Moving files fails due to privileges but they seem to be OK

    - by joaoc
    I am trying to copy old files from an OS X 10.5.8 to a new external HD. When trying to copy a folder I get the message: The operation cannot be completed because you do not have sufficient privileges for some of the items. I've checked the privileges and they seem ok (read & write for me). What is curious is that the folder is created empty on the target drive and I can then copy the contents from inside the original folder to inside the new folder without changing anything else. This happens with several folders but not all and is making backup a pain. I have to figure out which folder broke the copy, copy its contents to the external disk and then select what hasn't been copied to copy (and eventually stop at some point and repeating the experience)

    Read the article

  • Browser won't connect to svn server

    - by devpi
    This has been driving me nuts. For some reason, I can't access my svn repository using a browser in this laptop that I'm using right now (firefox & ie) The connection just times out. I'm at home right now and the server is in another room. It connects OK there and it also connects OK in my virtual machine in this same laptop. I'm pretty stumped right now and can't figure out why this is happening. I've also checked the proxies and I'm 100% sure I'm not using any at all. The virtual machine running on this laptop is XP 32bit and this one is a Win7 64 bit. Thanks

    Read the article

  • VMware Server Guest OS Random Shutdown

    - by radioactive21
    Anyone encounter a problem in which the Guest OS in VMware Server randomly shuts down? This has happened about once a month, where VMware Server just shuts down ALL guests OS. The host machine is fine, and you can log into the web management of VMware Server, it's just all guest OS get shutdown with no apparent reason. Even the logs say vmware guest os so and so was shut down, but no details why. This is not just one one machine, we have VMware server installed on three different PowerEdge servers and they all have encounter the same problem. We've tripped checked all settings and nothing is out of the ordinary.

    Read the article

  • How do you enable syslogd to accept incoming connections on Snow Leopard from remote loggers?

    - by Emmel
    How do I get syslogd to accept incoming connections from remote hosts on Snow Leopard? I'd like to centralize logging such that various devices and systems send logs to Snow Leopard's syslogd, which normally hangs out on UDP 514. However, I'm unable to get them to successfully be accepted by good ole syslogd. I tcpdumped on the Snow Leopard box to verify that packets are being spouted to port 514 -- they are. I checked that syslogd is listening on 514 -- it's not. Googling around told me that, on older versions of OSX (don't you love the way things change so rapidly on OSX), one just had to add a flag to the syslogd daemon to allow remote; one did this in com.apple.syslogd.plist. However the syslogd daemon has no flags (at least in its man page) that suggests any remote anything. What's the solution to this? Secondary, less import but relevant question: What's 'newsyslog'? I see a plist file but it's not running (apparently). Thanks

    Read the article

  • Outlook plugin/macro - "Got the wrong bob"

    - by tumchaaditya
    I want to develop a feature in outlook similar to 'Got the wrong bob' feature in Gmail. I want my plugin/macro to check the addressees when I hit send and want to alert me if I have included wrong person. I need some ideas about how can I build the logic for this feature? Or how should I go about it? If such plugin is already there then even better.. P.S.: I have already checked SendGuard and it is not of much use in this case.

    Read the article

  • IIS FTP Server works locally, but cannot connect from remote

    - by Mike Christensen
    I'm trying to setup an FTP server on Windows 2008 Server. I can connect locally: C:\>ftp localhost Connected to WebHead1 220 Microsoft FTP Service However, when I try to connect from remote, it doesn't work: ~>ftp x.x.x.x ftp: Can't connect to `x.x.x.x': Operation timed out ftp: Can't connect to `x.x.x.x' I've tried everything I can think of with the settings. The FTP server is bound to all unassigned IPs and listening on port 21. I've also checked "FTP Server" in the firewall settings. Nothing appears in the FTP log files. I'm totally out of ideas!

    Read the article

  • debian squeeze: where do the logs for sysv init scripts go? (why won't my init script work)

    - by sbeam
    my actual problem is trying to debug a init script to start Resque. It works fine run as root from the command line, but does nothing on boot. It has some proper insserv headers and I've run updaterc.d to create the symlinks, and checked that they exist. The script is +x. # find /etc/rc*.d -name \*resque\* /etc/rc0.d/K01resque /etc/rc1.d/K01resque /etc/rc2.d/S01resque /etc/rc3.d/S01resque /etc/rc4.d/S01resque /etc/rc5.d/S01resque /etc/rc6.d/K01resque # ls -l /etc/init.d/resque -rwxr-xr-x 1 root root 2093 Oct 24 03:02 /etc/init.d/resque the script can be viewed here if you like. It uses lsb functions to log messages, which essentially echo() to STDOUT I believe. So where does the output go during startup? It's not in /var/log/*log

    Read the article

  • Where can I find a useful Unicode fallback font for Mac OS X?

    - by Stephen Jennings
    On every browser I've tried (Firefox, Safari, Chrome, and Omniweb), when I go to a web page containing somewhat less-common characters, I can't see the glyphs. For example, on the Wikipedia page for the Bengali Language, the very first line contains a string of squares; on Windows, I can see the Bengali writing. On Windows, as long as I have the Arial Unicode MS font installed, these characters fall back to that font and display properly. Mac OS X doesn't seem to ship with a font containing these Unicode characters (it has Arial Unicode MS, but it must be a subset of the Windows version because Bengali doesn't display in that font). I checked on my Snow Leopard DVD and I installed "Additional Fonts" from the Optional Installs package, but I'm still missing many languages. Is there any good, free font that contains a large collection of languages? I know creating fonts is difficult and time-consuming, but it seems like including at least one font like this with operating systems should be standard by now.

    Read the article

  • Setting up dovecot on OpenBSD

    - by Jonas Byström
    I'm a *nix n00b that just installed dovecot (the selection with no ldap, mysql or pgsql) on OpenBSD 4.0 and I want to set it up for imap use, but I'm having a hard time finding documentation that I can understand. It currently running on port 143 (checked with telnet) but from there I need to do the following: I need some accounts, the once already on the system are fine if I can get those running (seemed to be some dovecot option somehow?), or just adding a few manually is ok too. Was there some setting for this in the default /etc/dovecot.conf? passdb bsdauth {} is uncommented by default... I need to create imap folders, or subfolders. How can I do that? Hopefully not, but anything else I need to do? I want to run without certification validation and no SSL/TLS, would this work by default (client-side settings)?

    Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >