Search Results

Search found 7706 results on 309 pages for 'checked'.

Page 114/309 | < Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >

• What are the possible reasons visual studio 2008 team system would not connect to a TFS2008 server

  - by Nikola Stjelja

  I have Visual Studio 2008 Team System installed on my work machine. I use it to work for an offisite clients Team Foundation Server 2008. Yesterday it stopped working. E.G. I couldn't connect to TFS. On my machine I have updates disabled, I have the firewall disabled and have a proper working connection to my clients server. The client didn't change anything on its machine. What are the possible reasons the visual studio couldn't find the TFS server. Note: Other members of my team can connect without problems, and I've checked we have the same configurations).

  Read the article

• Forward the Wan IP to another Wan IP without changing the source address

  - by user195410

  I have tried this case by using the NAT function in iptables but fail example. PC A IP is 1.1.1.1 (Win7) My Server IP is 2.2.2.2 (CentOS 6.2) target Server B is 3.3.3.3 (Windows server 2003) Flow: PC A WanIP -- My Server A -- Server B (WanIP) My iptables rules: 1. iptables -t nat -A PREROUTING -d 2.2.2.2 -p tcp --dport 80 -j DNAT --to-destination 3.3.3.3:80 2. iptables -t nat -A POSTROUTING -d 2.2.2.2 -j MASQUERADE finally, i can access server B website by enter 2.2.2.2:80 but when i checked the access log at Server B i found it's source address had been changed to src:2.2.2.2 dst:3.3.3.3 please help me to do how to get the real address is src:1.1.1.1 dst:3.3.3.3

  Read the article

• Windows 7 stuck on welcome screen after installing VMware Workstation 7 ?

  - by Mohammad

  I have Win 7 x64 and I have one account on it. I've just installed VMware Workstation 7.0.1 Build 2276000, after that Win 7 stuck on welcome screen and I have to click on the user image to continue. Before that because I have just one account Win7 just showed welcome screen for a minute and then it went to Win7 desktop automatically, but now I have to click on my account image to continue. Something that I've done : Start Run Msconfig Services Tab Checked Hide all Microsoft Services Disabled all services except Eset Services (Anti Virus) Unfortunately the problem haven't solved yet :( How should I fix it?

  Read the article

• Something eating space on OS drive

  - by noquery

  I am facing low disk space issue from last few days. I checked with Restore,System Volume Information, $Recycled folders. But there is nothing which is occupying space. I had scanned my system for virus too. Total size of C: is 18 GB. But when I select all folders inside C: and query for used space, it shows 20+ gb space is used. I vacate space some how by deleting temp files, program's cache files, disk clean up etc up to (3 gb). And I ensured that no cache/temp files are recreated who can use the space again. Even after cleaning so much data, I am again facing low disk space issue. Something is eating disk space within 15-20 mins.

  Read the article

• Passenger apache default page error

  - by gshankar

  I just installed Passenger and the Passenger Pref Pane on OSX. However, when I try to browse to one of my Rails applications I just get the default Apache "it works!" page. I've checked the vhost definitions and they seem ok so I can't seem to figure out whats wrong... I've tried reinstalling passenger and the pref pane and restarting apache but to no avail. Anyone know how to fix this? My vhost definition looks like this: <VirtualHost *:80> ServerName boilinghot.local DocumentRoot "/Users/ganesh/Code/boilinghot/public" RailsEnv development <Directory "/Users/ganesh/Code/boilinghot/public"> Order allow,deny Allow from all </Directory> </VirtualHost>

  Read the article

• Linux - Help, I'm running out of inodes!

  - by Rory McCann

  I have a filesystem that has lots of small files. Currently about 80% of inodes are used (I checked with df -i), however only 60% of disk space is used. How can I 'increase' the number of inodes? If it was just disk space, I know that I could just increase the size of the disk (this disk is on LVM). If I increase the size of the disk, will that make me have more inodes? I'm willing to grow the filesystem this disk is on, if that'd help.

  Read the article

• Log of cron actions on OS X

  - by Doug Harris

  Does the cron which comes with OS X log its actions anywhere? I'm not looking for output of any particular cron job, but rather log of what cron is doing. On a couple linux machines I've checked, there's /var/log/cron which has contents like: Apr 26 11:00:01 localhost crond[27755]: (root) CMD (/root/bin/mysql-backup) Apr 26 11:01:01 localhost crond[27892]: (root) CMD (run-parts /etc/cron.hourly) Apr 26 11:07:01 localhost crond[28138]: (root) CMD (/usr/local/bin/python /home/ user1/scripts/pythonscript.py) Apr 26 11:18:18 localhost crontab[28921]: (user2) LIST (user2) Apr 26 11:18:22 localhost crontab[28929]: (user2) BEGIN EDIT (user2) Apr 26 11:18:59 localhost crontab[28929]: (user2) REPLACE (user2) This shows when jobs ran, when users viewed or edited crontabs, etc. This stuff is nowhere that I've found on my Snow Leopard machine.

  Read the article

• Idle hard disk makes noise.

  - by ULTRA_POROV

  Like a fan or something. I checked it. I stopped all fans (cpu, video, psu) and the noise was still there. I read online that it might be a motor or something. I have put a great deal of effort making my pc quiet. Installed a quiet psu and cpu fan, reduced the fan speed of my video card, bought a ssd... But my drive for data makes this noise. I would never have expected that. Do all hard disks make this kind of noise? I guess most people won't notice it because of the other fans they have in the system, I however can hear it quite clearly because all my other fans are almost silent. So should i get a new one or should i just live with it, considering that i might end up with a drive that also makes this noise.

  Read the article

• DVI-D connection does not display properly at higher resolutions (2560 x 1440)

  - by Cromulent

  I have two computers connected to a Dell U2711 monitor. A PC which is connected using DisplayPort and a Mac connected using DVI-D. The PC displays 2560 x 1440 resolutions perfectly but when I try and set that resolution on the Mac it displays in an extremely fuzzy manner. So fuzzy in fact that I can hardly read the text on the screen. I've tried the Mac out connected via DisplayPort (unfortunately the monitor only has one DisplayPort connection) and it worked perfectly. I also had it connected via DVI-D in the past and it worked then. For some reason it just does not work anymore. I was wondering if this problem might be caused by a dodgy cable or perhaps not having the correct one. Can anyone think of what the issue might be? I've checked out the DVI-D spec and it should be able to display resolutions of 2560 x 1440 correctly.

  Read the article

• Test disk recovery

  - by AIB

  I had a 250GB hard disk having several NTFS partitions. The disk was a dynamic disk (created in windows). Now when I formatted windows (which was in another disk), the dynamic disk is shown as offline. I tried using the testdisk tool to recover the data and created a partial backup. Testdisk is able to list all partitions in the disk. All partitions are shown as type 'D' (Deleted). I want to change the 'D' to 'P' (Primary), 'L'(Logical), 'E' (Extended) appropriately and build a new partition table. If I can write the partition table to disk, the disk will be of 'basic' type and should be readable in all OS. What should be the appropriate partition types? I checked the files on the partitions and no OS was ound. So none of the partitions were bootable. Will randomly selecting P,L,E hurt the data in anyway?

  Read the article

• My EEEPc 900HA won't turn on/boot. Can it be fixed or does it need to be sent in?

  - by th3dude19

  My EEEPc 900HA stopped booting up out of nowhere. It went to sleep and when I went to wake it up, it wouldn't wake up. I powered down and went to power back up, but no go. The power light comes on solid and the battery/corded power light blinks consistently. There is no HDD activity or light activity. No BIOS. Just the lights described. I've troubleshooted the RAM, HDD, and internal power connections and everything checked out both on battery power and corded power. I've also reset the CMOS to no avail. What else can I do?

  Read the article

• internal DNS server limiting the speed as 55kb/sec ?

  - by kartook

  Hi all , Thanks in advance to everyone . Here is my Question . 1 .We have LAN internal DNS server ( 192.168.205.200 ) 2. DNS server Running on my ADDITIONAL DOMAIN CONTROLLER 3. Tested with Nslookup IPADDRESS and hostname resolving without any error . 4 .DHCP server Running on 3750 Switch ( Checked with CISCO Confirmed the configuration ) .DNS name server pointed to 192.168.205.200 . ISSUE : 1.Host getting ipaddress and DNS from DHCP server .Maximum file transfer Bandwidth 55KB/sec . 2. Assigned Static DNS on Host as ISP DNSServer Address, host getting full bandwidth whihc is 1mb/sec Thanks Kartook

  Read the article

• Linux (Kubuntu 9.10): Strange DNS problem [seems to be IPv6 issue]

  - by Homer J. Simpson

  Hi, I'm experiencing strange problems with my Kubuntu 9.10 when doing DNS requests from various applications. The requests are extremely slow, so loading any pages in Firefox or Konqueror, doing package installations in Kpackagemanager and other apps is really painful, while for example Opera doesnt have any problems, and ping is normally fast as well for DNS pings. I checked the proxy settings of both the used applications as well as of the general system and there are none, so to me it doesn't seem as there was something inbetween.. Does anybody have an idea on what to check for possible problem sources or how to solve this ? I'm behind a DSL home router which does the DHCP (and works well with my other computer). Any kind of advice would be really helpful. Edit: It seems to be some kind of IPv6 problem, as I could get it to work by disabling IPv6 explicitly in Firefox. Is there a general solution to this ?

  Read the article

• Accessing localhost on IIS7 from another computer on the network

  - by Adam

  I recently upgraded computers to Windows 7 Professional and am running IIS7. When I'm on my computer I can easily access localhost through my web browser but when I try from another computer on my network (replacing localhost with my computer name) it doesn't work. I also tried using "computername.domain.com" and still no luck. I can access other computers running Windows XP and IIS 5 but I'm having no luck accessing my own from another computer. I checked and my IIS7 has anonymous users enabled. Am I missing any other setting? Is this an IIS7 thing or am I missing a setting? Thanks in advance!

  Read the article

• Is the motherboard the cause of these errors?

  - by ianfuture

  Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

  Read the article

• Updating from OSX Lion 10.7.2 to 10.7.4

  - by Ozair Kafray

  I just got my Mac upgraded to 10.7.2, just to be able to install Xcode 4.3.3. However, when I try to install Xcode 4.3.3, it says that it requires a minimum of OSX 10.7.3. Then using the "Software Upgrade" tool it detects successfully for me that a combined upgrade to 10.7.4 is available. As I select Install Item, the download starts however, it fails after complete download (taking two hours) saying something like "the update cannot be saved". I have done this twice already, and followed it up until 5 minutes were left. I have also checked that there is enough space (60 GB) available on my hard disk, while the update requires around 1.5 GB. The question is what is causing the problem mentioned in bold above.

  Read the article

• Outlook for Mac (2011) - Exchange requirements, MAPI support

  - by benc

  I am looking at Outlook for Mac (in Office 2011). I wanted to find out what versions of Exchange are supported, as well as whether MAPI is supported. I googled and also searched the Microsoft site. I also checked in wikipedia, but it was probably too soon. I found announcement about Outlook for Mac I found the system requirements on the official site, but they don't say anything on these topics. I saw some forum traffic saying: MAPI is not supported, but there was no attribution, so I won't bother to quote it. Can anyone point me to some official documents that address these concerns?

  Read the article

• Warning: DocumentRoot * does not exist on Centos 6

  - by user1213807

  My virtual hosts lines: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /www/docs/example.com ServerName example.com ErrorLog logs/example.com-error_log CustomLog logs/example.com.com-access_log common </VirtualHost> And when I apache restart (sudo apachectl -k stop) get this error: Warning: DocumentRoot [/www/docs/example.com] does not exist I've checked some ways: All files and directories permissions is OK, everything 755. I think, maybe this error about SeLinux and disable it. But not working. Still same error. How can I fix this problem?

  Read the article

• Proffesional video editor that can handle FLV?

  - by acidzombie24

  I tried Adobe Premiere Pro CS3 and was not able to open my file (unsupported format). Media player can open it thanks to ffdshow (tryouts IIRC). Premiere doesnt seem to want to use ffdshow. I tried renaming it to AVI and hoped Premiere would open it via ffdshow but it didnt and i checked and disabled the dont use ffdshow option in ffdshow video decoder option. What is a good proffesional video editor that can handle FLV? All ffmpeg based editors died on it and virtualdub got close but had a bad framerate. Probably bc it didnt know it was a streaming vid and the start is 26mins of 31min video. More info here but what can i use to open and properly convert flv video http://superuser.com/questions/50779/windows-media-based-video-audio-converter

  Read the article

• SQL Maintenance Cleanup Task 'Success' But not deleting files

  - by Seph

  I have a maintenance plan setup for a databases on a server. As part of the backup is a Maintenance Cleanup Task. SQL Version 2008 The task that 'succeeds' is setup as: Delete backup files Correct folder (same address as the backup task) File extension: bak (NOT .bak) Delete files older than: 20 Hour(s) I have other similar cleanup tasks that occur in the same maintenance plan which work fine. This plan has worked fine in the past, I just noticed that last night it reported 'success' and the rest of the plan continued, however the file from 2 days ago still remains. I have checked similar questions such as this question, and this is not the case as my maintenance task worked fine two days ago and for the past several weeks:

  Read the article

• New power supply and now HDDs are not recognized.

  - by Michael

  So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

  Read the article

• Mac Book Pro and Photosohp working canvas lost off screen somewhere

  - by chris

  I seem to have a unique issue. I have a mac book pro which I often have connected to one or 2 additional monitors, and I think this is in part my issue. Cause when Im at home working with only the built in monitor and I go to open something new or existing in photoshop my canvas if you will call it that is no where to be found. I checked my display settings, its treating it as a one monitor solution. I've tried to in photoshop to bring all my windows to front, Ive tried to cascade and tile my windows, ive tried to reset my work area, and to no avail I can't for the life of me get the canvas to come to my screen so I can work with what ever I intend to work on. Anyone else have this problem or run into similar? How did you fix it?

  Read the article

• 3ware RAID in Windows 7

  - by user36484

  Just moved a 3ware 9500S-8 raid card and a few drives from my linux box into my win7 box. Windows Updates picked up the 3ware driver and installed it. After a reboot I checked Disk Management and it shows the array as one solid drive with the correct size. The only issue is that its not assigned a drive letter and when I right click on it my only option is to Convert to Dynamic Disk... From what I've read this is not something I want to do. What are my options?

  Read the article

• Why does a group policy not applied to the domain administrator account?

  - by Saariko

  I have a working policy on my entire domain. I just found out, when logging with the domain administrator, that this policy is not applied (EDIT: Running : gpresult shows that the GPO's are applied - but, this GPO is for Drive Mappings, and the actual drive mappings are NOT shown) The administrator account - does not have any login script on his profile tab. My GPO's are mainly small/atomic settings: single GPO to handle each settings: UAC, Firewall, printers. GPO status for the object is enabled That's an overview of the Drive Maps: Reading on MS support site, I checked the delegation tab, and it is marked as applied to domain and enterprise admins. Every user gets these policies correctly. The OU that is set is the root of the domain. (for testing purpose - I did that to eliminate hierarchy issues - did not help) Block Inheritance is disabled. (never used it anyway) GPO link GPO Security Filterings

  Read the article

• Browsers ignoring hosts file

  - by madkris

  Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

  Read the article

< Previous Page | 110 111 112 113 114 115 116 117 118 119 120 121  | Next Page >