crashpoint zero - Page 108

RAID 50 24Port Fast Writes Slow Reads - Ubuntu

- by James

What is going on here?! I am baffled. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/dev/zero of=/Volumes/MercuryInternal/test/test.fs bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 57.0948 s, 735 MB/s serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo dd if=/Volumes/MercuryInternal/test/test.fs of=/dev/null bs=4096k count=10000 10000+0 records in 10000+0 records out 41943040000 bytes (42 GB) copied, 116.189 s, 361 MB/s OF NOTE: My RAID50 is 3 sets of 8 disks. - This might not be the best config for SPEED. OS: Ubuntu 12.04.1 x64 Hardware Raid: RocketRaid 2782 - 24 Port Controller HardDriveType: Seagate Barracuda ES.2 1TB Drivers: v1.1 Open Source Linux Drivers. So 24 x 1TB drives, partitioned using parted. Filesystem is ext4. I/O scheduler WAS noop but have changed it to deadline with no seemingly performance benefit/cost. serveradmin@FILESERVER:/Volumes/MercuryInternal/test$ sudo gdisk -l /dev/sdb GPT fdisk (gdisk) version 0.8.1 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Disk /dev/sdb: 41020686336 sectors, 19.1 TiB Logical sector size: 512 bytes Disk identifier (GUID): 95045EC6-6EAF-4072-9969-AC46A32E38C8 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 41020686302 Partitions will be aligned on 2048-sector boundaries Total free space is 5062589 sectors (2.4 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 41015625727 19.1 TiB 0700 primary To me this should be working fine. I can't think of anything that would be causing this other then fundamental driver errors? I can't seem to get much/if any higher then the 361MB a second, is this hitting the "SATA2" link speed, which it shouldn't given it is a PCIe2.0 card. Or maybe some cacheing quirk - I do have Write Back enabled. Does anyone have any suggestions? Tests for me to perform? Or if you require more information, I am happy to provide it! This is a video fileserver for editing machines, so we have a preference for FAST reads over writes. I was just expected more from RAID 50 and 24 drives together... EDIT: (hdparm results) serveradmin@FILESERVER:/Volumes/MercuryInternal$ sudo hdparm -Tt /dev/sdb /dev/sdb: Timing cached reads: 17458 MB in 2.00 seconds = 8735.50 MB/sec Timing buffered disk reads: 884 MB in 3.00 seconds = 294.32 MB/sec EDIT2: (config details) Also, I am using a RAID block size of 256K. I was told a larger block size is better for larger (in my case large video) files. EDIT3: (Bonnie++ Results. Would love some guidance with this!)

Read the article

Some apps very slow to load on Windows 7, copy & paste very slow.

- by Mike

Hello, I searched here and couldn't find a similar issue to mine but apologies if I missed it. I've searched the web and no one else seems to be having the same issue either. I'm running Windows 7 Ultimate 64bit on a pretty high spec. machine (well, apart from the graphics): Asus M4A79T Deluxe AMD Phenom II 965 black edition (quad core, 3.4GHz) 8GB Crucial Ballistix DDR 1333MHz RAM 80GB Intex X25 SSD for OS 500GB mechanical drive for data. ATi Radeon HD 4600 series PCI-e Be Quiet! 850W PSU I think those are all the relevant stats, if you need anything else let me know. I've updated chipset, graphics and various other drivers all to no avail, the problem remains. I have also unplugged and replugged every connection internally and cleaned the RAM edge connectors. The problems: Video LAN (VLC) and CDBurnerXP both take ages to load, I'm talking 30 seconds and 1 minute respectively which is really not right. Copy and paste from Open Office spread sheet into Fire Fox, for example, is really, really slow, I'll have pressed control V 5 or 6 times before it actually happens, if I copy and then wait 5 to 10 seconds or so it'll paste first time so it's definitely some sort of time lag. Command and Conquer - Generals: Zero Hour. When playing it'll run perfectly for about 10 or 20 seconds then it'll just pause for 3 or 4 then run for another 10 or 20 seconds and pause again and so on. I had the Task Manager open on my 2nd monitor whilst playing once and I noticed it was using about 25% of the CPU, pretty stable but when the pause came another task didn't shoot up to 100% like others on the web have been reporting (similar but not the same as my issue, often svchost.exe for them) but dropped to 2 or 3% usage then back up to 25% when it started playing properly again. Very odd! But it gets even odder... I had a BSOD and reboot last week, when it rebooted the problem had completely gone, I could play C&C to my heart's content and both the other apps loaded instantly, copy and paste worked instantly too. I did an AVG update earlier this week which required a reboot, rebooted and the problem's back. I don't think it's AVG related though, I think it was just coincidence that's the app that required a reboot. I think any reboot would have brought the issue back. A number of reboots later and it hasn't gone away again. If any one could make any suggestions as to the likely cause and solution to these issues I'd be most grateful, it's driving me nuts! Thanks, Mike....

Read the article

How can I repair my USB drive?

- by yurko

USB drive is in read only state and I can't repair it. First of all I tried erase it using dd: root@yurko-laptop:/home/yurko-laptop# ls -l /dev/disk/by-id | grep usb lrwxrwxrwx 1 root root 9 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0 -> ../../sdb lrwxrwxrwx 1 root root 10 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0-part1 -> ../../sdb1 root@yurko-laptop:/home/yurko-laptop# dd if=/dev/zero of=/dev/sdb dd: ?????? ? «/dev/sdb»: ?? ?????????? ????????? ????? 8257537+0 ??????? ??????? 8257536+0 ??????? ???????? ??????????? 4227858432 ????? (4,2 GB), 942,633 c, 4,5 MB/c After that I wanted to create new filesystem using fdisk: root@yurko-laptop:/home/yurko-laptop# fdisk /dev/sdb You will not be able to write the partition table. WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdb: 4227 MB, 4227858432 bytes 4 heads, 63 sectors/track, 32768 cylinders Units = cylinders of 252 * 512 = 129024 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 18 32768 4126596 b W95 FAT32 Command (m for help): fdisk showed that the partition still exists and I can't write the partition table. I tried to delete the existing partition: Command (m for help): d Selected partition 1 Command (m for help): w Unable to write /dev/sdb root@yurko-laptop:/home/yurko-laptop# Why am I not be able to write the partition table? Does it mean that some hardware failure occurred? And is it possible to repair the current USB drive? I've tried to use hdparm and it showed that the readonly flag is on: root@yurko-laptop:/home/yurko-laptop# hdparm /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: f0 00 05 00 00 00 00 0a 00 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 multcount = 0 (off) readonly = 1 (on) readahead = 256 (on) geometry = 1016/131/62, sectors = 8257536, start = 0

Read the article

LDAP installed, running, but can't connect remotely [Ubuntu 10.10]

- by Casey Jordan

Hi all, I installed LDAP on my ubuntu 10.10 system, using the tutorial found here: https://help.ubuntu.com/10.10/serverguide/C/openldap-server.html Everything seems to be working well, when logged into the server via ssh I can run commands like: > ldapsearch -xLLL -b "dc=easydita,dc=com" uid=john sn givenName cn dn: uid=john,ou=people,dc=easydita,dc=com sn: Doe givenName: John cn: John Doe So I think that's a good sign that things are working well. However I have had zero luck connecting to the server remotely via GUI tools or command line. I have tied JXplorer, and LDAP administration tool. Running commands like this: > ldapsearch -xLLL -W -H ldap://ice.rit.edu -d1 "dc=easydita,dc=com" ldap_url_parse_ext(ldap://ice.rit.edu) ldap_create ldap_url_parse_ext(ldap://ice.rit.edu:389/??base) Enter LDAP Password: ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP ice.rit.edu:389 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 127.0.0.1:389 ldap_pvt_connect: fd: 3 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({i) ber: ber_flush2: 34 bytes to sd 3 ldap_result ld 0xb8940170 msgid 1 wait4msg ld 0xb8940170 msgid 1 (infinite timeout) wait4msg continue ld 0xb8940170 msgid 1 all 1 ** ld 0xb8940170 Connections: * host: ice.rit.edu port: 389 (default) refcnt: 2 status: Connected last used: Thu Mar 17 19:42:29 2011 ** ld 0xb8940170 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0xb8940170 request count 1 (abandoned 0) ** ld 0xb8940170 Response Queue: Empty ld 0xb8940170 response count 0 ldap_chkResponseList ld 0xb8940170 msgid 1 all 1 ldap_chkResponseList returns ld 0xb8940170 NULL ldap_int_select read1msg: ld 0xb8940170 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 16 contents: read1msg: ld 0xb8940170 msgid 1 message type bind ber_scanf fmt ({eAA) ber: read1msg: ld 0xb8940170 0 new referrals read1msg: mark request completed, ld 0xb8940170 msgid 1 request done: ld 0xb8940170 msgid 1 res_errno: 49, res_error: <>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_err2string ldap_bind: Invalid credentials (49) I am pretty sure that I set up the admin password correctly, but the tutorial was not very specific about that. (Also could not find instructions on how to reset admin password.) Additional info: I was told that this file might hold important information so I will post it: /etc/ldap/slapd.d/cn=config/olcDatabase={0}config.ldif dn: olcDatabase={0}config objectClass: olcDatabaseConfig olcDatabase: {0}config olcAccess: {0}to * by dn.exact=cn=localroot,cn=config manage by * break olcRootDN: cn=admin,cn=config structuralObjectClass: olcDatabaseConfig entryUUID: eca09490-e524-102f-87c5-17d7a82e8985 creatorsName: cn=config createTimestamp: 20110317205733Z entryCSN: 20110317205733.193089Z#000000#000#000000 modifiersName: cn=config modifyTimestamp: 20110317205733Z Given that it seems I have this almost set up correctly is there any steps I can take to correct this? Thanks, Casey

Read the article

Areca 1280ml RAID6 volume set failed

- by Richard

Today we hit some kind of worst case scenario and are open to any kind of good ideas. Here is our problem: We are using several dedicated storage servers to host our virtual machines. Before I continue, here are the specs: Dedicated Server Machine Areca 1280ml RAID controller, Firmware 1.49 12x Samsung 1TB HDDs We configured one RAID6-set with 10 discs that contains one logical volume. We have two hot spares in the system. Today one HDD failed. This happens from time to time, so we replaced it. Upon rebuilding a second disc failed. Normally this is no fun. We stopped heavy IO-operations to ensure a stable RAID rebuild. Sadly the hot-spare disc failed while rebuilding and the whole thing stopped. Now we have the following situation: The controller says that the raid set is rebuilding The controller says that the volume failed It is a RAID 6 system and two discs failed, so the data has to be intact, but we cannot bring the volume online again to access the data. While searching we found the following leads. I don't know whether they are good or bad: Mirroring all the discs to a second set of drives. So we would have the possibility to try different things without loosing more than we already have. Trying to rebuild the array in R-Studio. But we have no real experience with the software. Pulling all drives, rebooting the system, changing into the areca controller bios, reinserting the HDDs one-by-one. Some people are saying that the brought the system online by this. Some are saying that the effect is zero. Some say, that they blew the whole thing. Using undocumented areca commands like "rescue" or "LeVel2ReScUe". Contacting a computer forensics service. But whoa... primary estimates by phone exceeded 20.000€. That's why we would kindly ask for help. Maybe we are missing the obvious? And yes of course, we have backups. But some systems lost one week of data, thats why we'd like to get the system up and running again. Any help, suggestions and questions are more than welcome.

Read the article

what can cause a folder to become indestructible?

- by JustJeff

I have a directory that I want to delete, but windows (xp sp3) is giving me the run-around and the folder is now effectively indestructible. Attempts to open the folder, either via explorer or cmd.exe are met with 'd:/temp/foo Is Not Accessible. Access is denied'. Attempts to delete the folder result in 'Cannot delete foo: The directory is not empty' So I can't delete it because supposedly it's not empty, but windows won't let me in it for some reason, so I can't clean it out first. There's nothing in it of consequence, and basically I just want to delete it at this point. Thinking that some other process must have a lock on it, I used the SysInternals 'handles' and Process Explorer to look for open handles with the directory name. These turned up no matches. (The directory name is not actually 'foo', it is something more unique but 'foo' is easier to type here). I put the machine through a restart, and the problem persists. I did a search for the folder name with regedit, to see what other apps might be aware of it. No match. The properties dialog was mildly interesting. The Read-Only attribute is 'semi-checked', i.e., the grayish check mark you get when some parts are and some parts aren't. Naturally I immediately unchecked this, and tried to delete the folder. No go. Opening properties again reveals the gray check mark next to Read-Only has returned. All the stats, size, size on disk, files, folders, all these are zero. There do not appear to be any shares on the folder, so that's not it either. Finally, I tried opening the partition's properties, and running the Tools/Error Checking utility. This didn't turn up any problems either. Fwiw, this directory was created by [a popular gui zip tool] when I tried to unpack a tar-and-zipped archive created on another system with command line utils. The archive was definitely corrupt, but I've never seen such a file do anything worse than crash the zip app, and certainly never leave permanent glitches in the file system. So what else can possibly be going on to make this folder behave this way?

Read the article

Open a terminal window & run command, then close the terminal window if command completed successfully?

- by Caspar

I'm trying to write a script to do the following: Open a terminal window which runs a long running command (Ideally) move the terminal window to the top left corner of the screen using xdotool Close the terminal window only if the long running command exited with a zero return code To put it in Windows terms, I'd like to have the Linux equivalent of start cmd /c long_running_cmd if long_running_cmd succeeds, and do the equivalent of start cmd /k long_running_cmd if it fails. What I have so far is a script which starts xterm with a given command, and then moves the window as desired: #!/bin/bash # open a new terminal window in the background with the long running command xterm -e ~/bin/launcher.sh ./long_running_cmd & # move the terminal window (requires window process to be in background) sleep 1 xdotool search --name launcher.sh windowmove 0 0 And ~/bin/launcher.sh is intended to run whatever is passed as a command line argument to it: #!/bin/bash # execute command line arguments $@ But, I haven't been able to get the xterm window to close after long_running_cmd is done. I think something like xterm -e ~/bin/launcher.sh "./long_running_cmd && kill $PPID" & might be what I'm after, so that xterm is launched in the background and it runs ./long_running_cmd && kill $PPID. So the shell in the xterm window then runs the long running command and if it completes successfully, the parent process of the shell (i.e. the process owning the xterm window) is killed, thereby closing the xterm window. But, that doesn't work: nothing happens, so I suspect my quoting or escaping is incorrect, and I haven't been able to fix it. An alternate approach would be to get the PID of long_running_cmd, use wait to wait for it to finish, then kill the xterm window using kill $! (since $! refers to last task started in the background, which will be the xterm window). But I can't figure out a nice way to get the PID & exit value of long_running_cmd out of the shell running in the xterm window and into the shell which launched the xterm window (short of writing them to a file somewhere, which seems like it should be unnecessary?). What am I doing wrong, or is there an easier way to accomplish this?

Read the article

APC File Cache not working but user cache is fine

- by danishgoel

I have just got a VPS (with cPanel/WHM) to test what gains i could get in my application with using apc file cache AND user cache. So firstly I got the PHP 5.3 compiled in as a DSO (apache module). Then installed APC via PECL through SSH. (First I tried with WHM Module installer, it also had the same problem, so I tried it via ssh) All seemed fine and phpinfo showed apc loaded and enabled. Then I checked with apc.php. All seemed OK But as I started testing my php application, the stats in apc for File Cache Information state: Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Which meant no PHP files were being cached, even though I had browsed through over 10 PHP files having multiple includes. So there must have been some Cached Files. But the user cache is functioning fine. User Cache Information Cached Variables 0 ( 0.0 Bytes) Hits 1000 Misses 1000 Request Rate (hits, misses) 0.84 cache requests/second Hit Rate 0.42 cache requests/second Miss Rate 0.42 cache requests/second Insert Rate 0.84 cache requests/second Cache full count 0 Its actually from an APC caching test script which tries to retrieve and store 1000 entries and gives me the times. A sort of simple benchmark. Can anyone help me here. Even though apc.cache_by_default = 1, no php files are being cached. This is my apc config Runtime Settings apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 1M apc.mmap_file_mask apc.num_files_hint 1000 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 32M apc.slam_defense 1 apc.stat 1 apc.stat_ctime 0 apc.ttl 0 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock 1 Also most php files are under 20KB, thus, apc.max_file_size = 1M is not the cause. I have also tried using 'apc_compile_file ' to force some files into opcode cache with no luck. I have also re-installed APC with Debugging enabled, but nothing shows in the error_log I have also tried setting mmap_file_mask to /dev/zero and /tmp/apc.xxxxxx, i have also set /tmp permissions to 777 to no avail Any clue anyone. Update: I have tried following things and none cause APC file cache to populate 1. set apc.enable_cli = 1 AND run a script from cli 2. Set apc.max_file_size = 5M (just in case) 3. switched php handler from dso to FastCGI in WHM (then switched it back to dso as it did not solve the problem) 4. Even tried restarting the container

Read the article

Loss of wireless network connectivity when playing video via HDMI cable

- by Jeff Fohl

Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas? EDIT: I am now leaning towards the possibility that the HDMI cable is somehow interfering with the wireless network, when large amounts of data are being pushed through the cable. Is this possible?

Read the article

Unable to burn Windows ISO from Fedora

- by user331947

First of all, English is not my native tongue, so apologies for any mistakes. My computer recently started prompting that it can't launch Windows successfully. So I just choose start Windows normally. Then, I found that the startup freezes at the Windows screen (before the login prompt). I have tried rebooting several times and get the same results. So I just gave up. After few days, I tried to boot up my laptop again. This time it got to the desktop, but it's extremely slow and the icons on my Desktop don't show up. I decided to format the Windows partition and reinstall a new one. (It is usually faster that way since I kept my 400GB+ data on aother partition and programs and the rest in the same partition as Windows). The thing is I get the Windows disc at the moment (Traveling aboard). But I have a Windows 7 disc image on my hard disk. So, I downloaded Ubuntu 14.04 LTS, made a Live USB, and then try to burn the image from Ubuntu. But the program just freezes and I don't know why. I tried several times and it's still the same. So I tried using Fedora instead, just to see if it will work. The Disk Image Writer report something like this. Error unmounting /dev/dm-0: Command-line `umount "/dev/dm-0"' exited with non-zero exit status 32: umount: /: target is busy (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1).) (udisks-error-quark, 14) Also, I tried installing linux on the windows partition. The installation program freezes (both Ubuntu and Fedora). So, I thought that maybe something are wrong with my hard disk. I seek the solution on the internet and found that gparted can be used to format a partition. And it also froze at "Searching /dev/sda/ partition ...". I'm using Lenovo Y570. Spec below. http://www.notebookreview.com/notebookreview/lenovo-ideapad-y570-review-a-lenovo-bestseller/3/ Can anyone suggest a next step in diagnosing and fixing this problem? Thanks in advance.

Read the article

Can not get sound over hdmi in kubuntu 9.10

- by user32509

I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :) Edit: lspci -v ... 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) Subsystem: Giga-byte Technology Device a022 Flags: bus master, fast devsel, latency 0, IRQ 22 Memory at ea400000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel ... cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.20. lsmod | grep snd_hda_intel snd_hda_intel 31880 2 snd_hda_codec 87584 2 snd_hda_codec_realtek,snd_hda_intel snd_pcm 93160 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd 77096 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device snd_page_alloc 10928 2 snd_hda_intel,snd_pcm I think I am missing the something-hdmi module? Is there such a thing?

Read the article

Windows 2003 Server Caching

- by pablomedok

We're experiencing almost everyday table index corruption on Windows Server 2003. We are running an old application which uses DBF/CDX tables. Everything was fine for ages, but 6 months after we've installed Advantage Database Server (which allows access to some tables to our website) we started to get index corruption problems. And we don't know whom to blame. We've tried to exclude all possible causes of this corruption. Now all users work in terminal mode - so no network problems can cause that, OpLocks also can't be a reason. We changed hardware, network cards, switches, reainstalled Server and even moved to new dedicated server. The only thing we can't exclude is ADS - because it should be working. Is that possible that local read/write caching that causes that problem? E.g. one user or process uses cached data, later another user/process changes it, and later the first user changes it again without knowing about the first change. Is it possible theoretically? Is it possible that this problem is caused by imporper file server or caching settings? Is it possible that normal users use non-cached data and ADS is using cached data? Or vice versa? Is it possible that each terminal user has its own cache? Or maybe the problem is about RAID caching somehow interfering with Windows Server caching? Or maybe there are some special settings for Windows Server for working with DBF tables that are being written simultaneously by several terminal users? Maybe there is a way to turn off caching for some certain files to check it? Sometimes we get index crash twice a day, sometimes everything is fine for 5 days in a row. Today only one user was working in the evening with the database (usually there are 30-50 users are working simultaneously on working hours). So it's almost zero load on server. , Syncronization with website is performed every 5 minutes during work hours and every 15 minutes in the evening and on weekend. We've done file access auditing and it shows that during website syncroniztions ADS server opens the table and index files for ReadEA and WriteEA though it performs only SELECT queries. ADS does UPDATE/INSERT queries but less freqently - not during regular synchronizations, but only when an order is placed by website visitor). Please help me. We are struggling with this problem for almost a year and still can't find any pattern or any clue about this problem. Here is my previous qestion about this issue on DBA: http://dba.stackexchange.com/questions/8646/foxpro-dbf-index-corruption

Read the article

Linux software RAID6: 3 drives offline - how to force online?

- by Ole Tange

This is similar to 3 drives fell out of Raid6 mdadm - rebuilding? except that it is not due to a failing cable. Instead the 3rd drive fell offline during rebuild of another drive. The drive failed with: kernel: end_request: I/O error, dev sdc, sector 293732432 kernel: md/raid:md0: read error not correctable (sector 293734224 on sdc). After rebooting both these sectors and the sectors around them are fine. This leads me to believe the error is intermittent and thus the device simply took too long to error correct the sector and remap it. I expect that no data was written to the RAID after it failed. Therefore I hope that if I can kick the last failing device online that the RAID is fine and that the xfs_filesystem is OK, maybe with a few missing recent files. Taking a backup of the disks in the RAID takes 24 hours, so I would prefer that the solution works the first time. I have therefore set up a test scenario: export PRE=3 parallel dd if=/dev/zero of=/tmp/raid${PRE}{} bs=1k count=1000k ::: 1 2 3 4 5 parallel mknod /dev/loop${PRE}{} b 7 ${PRE}{} \; losetup /dev/loop${PRE}{} /tmp/raid${PRE}{} ::: 1 2 3 4 5 mdadm --create /dev/md$PRE -c 4096 --level=6 --raid-devices=5 /dev/loop${PRE}[12345] cat /proc/mdstat mkfs.xfs -f /dev/md$PRE mkdir -p /mnt/disk2 umount -l /mnt/disk2 mount /dev/md$PRE /mnt/disk2 seq 1000 | parallel -j1 mkdir -p /mnt/disk2/{}\;cp /bin/* /mnt/disk2/{}\;sleep 0.5 & mdadm --fail /dev/md$PRE /dev/loop${PRE}3 /dev/loop${PRE}4 cat /proc/mdstat # Assume reboot so no process is using the dir kill %1; sync & kill %1; sync & # Force fail one too many mdadm --fail /dev/md$PRE /dev/loop${PRE}1 parallel --tag -k mdadm -E ::: /dev/loop${PRE}? | grep Upda # loop 2,5 are newest. loop1 almost newest => force add loop1 Next step is to add loop1 back - and this is where I am stuck. After that do a xfs-consistency check. When that works, check that the solution also works on real devices (such a 4 USB sticks).

Read the article

c# Truncate HTML safely for article summary

- by WickedW

Hi All, Does anyone have a c# variation of this? This is so I can take some html and display it without breaking as a summary lead in to an article? http://stackoverflow.com/questions/1193500/php-truncate-html-ignoring-tags Save me from reinventing the wheel! Thank you very much ---------- edit ------------------ Sorry, new here, and your right, should have phrased the question better, heres a bit more info I wish to take a html string and truncate it to a set number of words (or even char length) so I can then show the start of it as a summary (which then leads to the main article). I wish to preserve the html so I can show the links etc in preview. The main issue I have to solve is the fact that we may well end up with unclosed html tags if we truncate in the middle of 1 or more tags! The idea I have for solution is to a) truncate the html to N words (words better but chars ok) first (be sure not to stop in the middle of a tag and truncate a require attribute) b) work through the opened html tags in this truncated string (maybe stick them on stack as I go?) c) then work through the closing tags and ensure they match the ones on stack as I pop them off? d) if any open tags left on stack after this, then write them to end of truncated string and html should be good to go!!!! -- edit 12112009 Here is what I have bumbled together so far as a unittest file in VS2008, this 'may' help someone in future My hack attempts based on Jan code are at top for char version + word version (DISCLAIMER: this is dirty rough code!! on my part) I assume working with 'well-formed' HTML in all cases (but not necessarily a full document with a root node as per XML version) Abels XML version is at bottom, but not yet got round to fully getting tests to run on this yet (plus need to understand the code) ... I will update when I get chance to refine having trouble with posting code? is there no upload facility on stack? Thanks for all comments :) using System; using System.Collections.Generic; using System.Text.RegularExpressions; using System.Xml; using System.Xml.XPath; using Microsoft.VisualStudio.TestTools.UnitTesting; namespace PINET40TestProject { [TestClass] public class UtilityUnitTest { public static string TruncateHTMLSafeishChar(string text, int charCount) { bool inTag = false; int cntr = 0; int cntrContent = 0; // loop through html, counting only viewable content foreach (Char c in text) { if (cntrContent == charCount) break; cntr++; if (c == '<') { inTag = true; continue; } if (c == '>') { inTag = false; continue; } if (!inTag) cntrContent++; } string substr = text.Substring(0, cntr); //search for nonclosed tags MatchCollection openedTags = new Regex("<[^/](.|\n)*?>").Matches(substr); MatchCollection closedTags = new Regex("<[/](.|\n)*?>").Matches(substr); // create stack Stack<string> opentagsStack = new Stack<string>(); Stack<string> closedtagsStack = new Stack<string>(); // to be honest, this seemed like a good idea then I got lost along the way // so logic is probably hanging by a thread!! foreach (Match tag in openedTags) { string openedtag = tag.Value.Substring(1, tag.Value.Length - 2); // strip any attributes, sure we can use regex for this! if (openedtag.IndexOf(" ") >= 0) { openedtag = openedtag.Substring(0, openedtag.IndexOf(" ")); } // ignore brs as self-closed if (openedtag.Trim() != "br") { opentagsStack.Push(openedtag); } } foreach (Match tag in closedTags) { string closedtag = tag.Value.Substring(2, tag.Value.Length - 3); closedtagsStack.Push(closedtag); } if (closedtagsStack.Count < opentagsStack.Count) { while (opentagsStack.Count > 0) { string tagstr = opentagsStack.Pop(); if (closedtagsStack.Count == 0 || tagstr != closedtagsStack.Peek()) { substr += "</" + tagstr + ">"; } else { closedtagsStack.Pop(); } } } return substr; } public static string TruncateHTMLSafeishWord(string text, int wordCount) { bool inTag = false; int cntr = 0; int cntrWords = 0; Char lastc = ' '; // loop through html, counting only viewable content foreach (Char c in text) { if (cntrWords == wordCount) break; cntr++; if (c == '<') { inTag = true; continue; } if (c == '>') { inTag = false; continue; } if (!inTag) { // do not count double spaces, and a space not in a tag counts as a word if (c == 32 && lastc != 32) cntrWords++; } } string substr = text.Substring(0, cntr) + " ..."; //search for nonclosed tags MatchCollection openedTags = new Regex("<[^/](.|\n)*?>").Matches(substr); MatchCollection closedTags = new Regex("<[/](.|\n)*?>").Matches(substr); // create stack Stack<string> opentagsStack = new Stack<string>(); Stack<string> closedtagsStack = new Stack<string>(); foreach (Match tag in openedTags) { string openedtag = tag.Value.Substring(1, tag.Value.Length - 2); // strip any attributes, sure we can use regex for this! if (openedtag.IndexOf(" ") >= 0) { openedtag = openedtag.Substring(0, openedtag.IndexOf(" ")); } // ignore brs as self-closed if (openedtag.Trim() != "br") { opentagsStack.Push(openedtag); } } foreach (Match tag in closedTags) { string closedtag = tag.Value.Substring(2, tag.Value.Length - 3); closedtagsStack.Push(closedtag); } if (closedtagsStack.Count < opentagsStack.Count) { while (opentagsStack.Count > 0) { string tagstr = opentagsStack.Pop(); if (closedtagsStack.Count == 0 || tagstr != closedtagsStack.Peek()) { substr += "</" + tagstr + ">"; } else { closedtagsStack.Pop(); } } } return substr; } public static string TruncateHTMLSafeishCharXML(string text, int charCount) { // your data, probably comes from somewhere, or as params to a methodint XmlDocument xml = new XmlDocument(); xml.LoadXml(text); // create a navigator, this is our primary tool XPathNavigator navigator = xml.CreateNavigator(); XPathNavigator breakPoint = null; // find the text node we need: while (navigator.MoveToFollowing(XPathNodeType.Text)) { string lastText = navigator.Value.Substring(0, Math.Min(charCount, navigator.Value.Length)); charCount -= navigator.Value.Length; if (charCount <= 0) { // truncate the last text. Here goes your "search word boundary" code: navigator.SetValue(lastText); breakPoint = navigator.Clone(); break; } } // first remove text nodes, because Microsoft unfortunately merges them without asking while (navigator.MoveToFollowing(XPathNodeType.Text)) { if (navigator.ComparePosition(breakPoint) == XmlNodeOrder.After) { navigator.DeleteSelf(); } } // moves to parent, then move the rest navigator.MoveTo(breakPoint); while (navigator.MoveToFollowing(XPathNodeType.Element)) { if (navigator.ComparePosition(breakPoint) == XmlNodeOrder.After) { navigator.DeleteSelf(); } } // moves to parent // then remove *all* empty nodes to clean up (not necessary): // TODO, add empty elements like <br />, <img /> as exclusion navigator.MoveToRoot(); while (navigator.MoveToFollowing(XPathNodeType.Element)) { while (!navigator.HasChildren && (navigator.Value ?? "").Trim() == "") { navigator.DeleteSelf(); } } // moves to parent navigator.MoveToRoot(); return navigator.InnerXml; } [TestMethod] public void TestTruncateHTMLSafeish() { // Case where we just make it to start of HREF (so effectively an empty link) // 'simple' nested none attributed tags Assert.AreEqual(@"<h1>1234</h1><b><i>56789</i>012</b>", TruncateHTMLSafeishChar( @"<h1>1234</h1><b><i>56789</i>012345</b>", 12)); // In middle of a! Assert.AreEqual(@"<h1>1234</h1><a href=""testurl""><b>567</b></a>", TruncateHTMLSafeishChar( @"<h1>1234</h1><a href=""testurl""><b>5678</b></a><i><strong>some italic nested in string</strong></i>", 7)); // more Assert.AreEqual(@"<div><b><i><strong>1</strong></i></b></div>", TruncateHTMLSafeishChar( @"<div><b><i><strong>12</strong></i></b></div>", 1)); // br Assert.AreEqual(@"<h1>1 3 5</h1><br />6", TruncateHTMLSafeishChar( @"<h1>1 3 5</h1><br />678<br />", 6)); } [TestMethod] public void TestTruncateHTMLSafeishWord() { // zero case Assert.AreEqual(@" ...", TruncateHTMLSafeishWord( @"", 5)); // 'simple' nested none attributed tags Assert.AreEqual(@"<h1>one two <br /></h1><b><i>three ...</i></b>", TruncateHTMLSafeishWord( @"<h1>one two <br /></h1><b><i>three </i>four</b>", 3), "we have added ' ...' to end of summary"); // In middle of a! Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four ...</b></a>", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four five </b></a><i><strong>some italic nested in string</strong></i>", 4)); // start of h1 Assert.AreEqual(@"<h1>one two three ...</h1>", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 3)); // more than words available Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i> ...", TruncateHTMLSafeishWord( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 99)); } [TestMethod] public void TestTruncateHTMLSafeishWordXML() { // zero case Assert.AreEqual(@" ...", TruncateHTMLSafeishWord( @"", 5)); // 'simple' nested none attributed tags string output = TruncateHTMLSafeishCharXML( @"<body><h1>one two </h1><b><i>three </i>four</b></body>", 13); Assert.AreEqual(@"<body>\r\n <h1>one two </h1>\r\n <b>\r\n <i>three</i>\r\n </b>\r\n</body>", output, "XML version, no ... yet and addeds '\r\n + spaces?' to format document"); // In middle of a! Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four ...</b></a>", TruncateHTMLSafeishCharXML( @"<body><h1>one two three </h1><a href=""testurl""><b class=""mrclass"">four five </b></a><i><strong>some italic nested in string</strong></i></body>", 4)); // start of h1 Assert.AreEqual(@"<h1>one two three ...</h1>", TruncateHTMLSafeishCharXML( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 3)); // more than words available Assert.AreEqual(@"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i> ...", TruncateHTMLSafeishCharXML( @"<h1>one two three </h1><a href=""testurl""><b>four five </b></a><i><strong>some italic nested in string</strong></i>", 99)); } } }

Read the article

Python script is exiting with no output and I have no idea why

- by Adam Tuttle

I'm attempting to debug a Subversion post-commit hook that calls some python scripts. What I've been able to determine so far is that when I run post-commit.bat manually (I've created a wrapper for it to make it easier) everything succeeds, but when SVN runs it one particular step doesn't work. We're using CollabNet SVNServe, which I know from the documentation removes all environment variables. This had caused some problems earlier, but shouldn't be an issue now. Before Subversion calls a hook script, it removes all variables - including $PATH on Unix, and %PATH% on Windows - from the environment. Therefore, your script can only run another program if you spell out that program's absolute name. The relevant portion of post-commit.bat is: echo -------------------------- >> c:\svn-repos\company\hooks\svn2ftp.out.log set SITENAME=staging set SVNPATH=branches/staging/wwwroot/ "C:\Python3\python.exe" C:\svn-repos\company\hooks\svn2ftp.py ^ --svnUser="svnusername" ^ --svnPass="svnpassword" ^ --ftp-user=ftpuser ^ --ftp-password=ftppassword ^ --ftp-remote-dir=/ ^ --access-url=svn://10.0.100.6/company ^ --status-file="C:\svn-repos\company\hooks\svn2ftp-%SITENAME%.dat" ^ --project-directory=%SVNPATH% "staging.company.com" %1 %2 >> c:\svn-repos\company\hooks\svn2ftp.out.log echo -------------------------- >> c:\svn-repos\company\hooks\svn2ftp.out.log When I run post-commit.bat manually, for example: post-commit c:\svn-repos\company 12345, I see output like the following in svn2ftp.out.log: -------------------------- args1: c:\svn-repos\company args0: staging.company.com abspath: c:\svn-repos\company project_dir: branches/staging/wwwroot/ local_repos_path: c:\svn-repos\company getting youngest revision... done, up-to-date -------------------------- However, when I commit something to the repo and it runs automatically, the output is: -------------------------- -------------------------- svn2ftp.py is a bit long, so I apologize but here goes. I'll have some notes/disclaimers about its contents below it. #!/usr/bin/env python """Usage: svn2ftp.py [OPTION...] FTP-HOST REPOS-PATH Upload to FTP-HOST changes committed to the Subversion repository at REPOS-PATH. Uses svn diff --summarize to only propagate the changed files Options: -?, --help Show this help message. -u, --ftp-user=USER The username for the FTP server. Default: 'anonymous' -p, --ftp-password=P The password for the FTP server. Default: '@' -P, --ftp-port=X Port number for the FTP server. Default: 21 -r, --ftp-remote-dir=DIR The remote directory that is expected to resemble the repository project directory -a, --access-url=URL This is the URL that should be used when trying to SVN export files so that they can be uploaded to the FTP server -s, --status-file=PATH Required. This script needs to store the last successful revision that was transferred to the server. PATH is the location of this file. -d, --project-directory=DIR If the project you are interested in sending to the FTP server is not under the root of the repository (/), set this parameter. Example: -d 'project1/trunk/' This should NOT start with a '/'. 2008.5.2 CKS Fixed possible Windows-related bug with tempfile, where the script didn't have permission to write to the tempfile. Replaced this with a open()-created file created in the CWD. 2008.5.13 CKS Added error logging. Added exception for file-not-found errors when deleting files. 2008.5.14 CKS Change file open to 'rb' mode, to prevent Python's universal newline support from stripping CR characters, causing later comparisons between FTP and SVN to report changes. """ try: import sys, os import logging logging.basicConfig( level=logging.DEBUG, format='%(asctime)s %(levelname)s %(message)s', filename='svn2ftp.debug.log', filemode='a' ) console = logging.StreamHandler() console.setLevel(logging.ERROR) logging.getLogger('').addHandler(console) import getopt, tempfile, smtplib, traceback, subprocess from io import StringIO import pysvn import ftplib import inspect except Exception as e: logging.error(e) #capture the location of the error frame = inspect.currentframe() stack_trace = traceback.format_stack(frame) logging.debug(stack_trace) print(stack_trace) #end capture sys.exit(1) #defaults host = "" user = "anonymous" password = "@" port = 21 repo_path = "" local_repos_path = "" status_file = "" project_directory = "" remote_base_directory = "" toAddrs = "[email protected]" youngest_revision = "" def email(toAddrs, message, subject, fromAddr='[email protected]'): headers = "From: %s\r\nTo: %s\r\nSubject: %s\r\n\r\n" % (fromAddr, toAddrs, subject) message = headers + message logging.info('sending email to %s...' % toAddrs) server = smtplib.SMTP('smtp.company.com') server.set_debuglevel(1) server.sendmail(fromAddr, toAddrs, message) server.quit() logging.info('email sent') def captureErrorMessage(e): sout = StringIO() traceback.print_exc(file=sout) errorMessage = '\n'+('*'*80)+('\n%s'%e)+('\n%s\n'%sout.getvalue())+('*'*80) return errorMessage def usage_and_exit(errmsg): """Print a usage message, plus an ERRMSG (if provided), then exit. If ERRMSG is provided, the usage message is printed to stderr and the script exits with a non-zero error code. Otherwise, the usage message goes to stdout, and the script exits with a zero errorcode.""" if errmsg is None: stream = sys.stdout else: stream = sys.stderr print(__doc__, file=stream) if errmsg: print("\nError: %s" % (errmsg), file=stream) sys.exit(2) sys.exit(0) def read_args(): global host global user global password global port global repo_path global local_repos_path global status_file global project_directory global remote_base_directory global youngest_revision try: opts, args = getopt.gnu_getopt(sys.argv[1:], "?u:p:P:r:a:s:d:SU:SP:", ["help", "ftp-user=", "ftp-password=", "ftp-port=", "ftp-remote-dir=", "access-url=", "status-file=", "project-directory=", "svnUser=", "svnPass=" ]) except getopt.GetoptError as msg: usage_and_exit(msg) for opt, arg in opts: if opt in ("-?", "--help"): usage_and_exit() elif opt in ("-u", "--ftp-user"): user = arg elif opt in ("-p", "--ftp-password"): password = arg elif opt in ("-SU", "--svnUser"): svnUser = arg elif opt in ("-SP", "--svnPass"): svnPass = arg elif opt in ("-P", "--ftp-port"): try: port = int(arg) except ValueError as msg: usage_and_exit("Invalid value '%s' for --ftp-port." % (arg)) if port < 1 or port > 65535: usage_and_exit("Value for --ftp-port must be a positive integer less than 65536.") elif opt in ("-r", "--ftp-remote-dir"): remote_base_directory = arg elif opt in ("-a", "--access-url"): repo_path = arg elif opt in ("-s", "--status-file"): status_file = os.path.abspath(arg) elif opt in ("-d", "--project-directory"): project_directory = arg if len(args) != 3: print(str(args)) usage_and_exit("host and/or local_repos_path not specified (" + len(args) + ")") host = args[0] print("args1: " + args[1]) print("args0: " + args[0]) print("abspath: " + os.path.abspath(args[1])) local_repos_path = os.path.abspath(args[1]) print('project_dir:',project_directory) youngest_revision = int(args[2]) if status_file == "" : usage_and_exit("No status file specified") def main(): global host global user global password global port global repo_path global local_repos_path global status_file global project_directory global remote_base_directory global youngest_revision read_args() #repository,fs_ptr #get youngest revision print("local_repos_path: " + local_repos_path) print('getting youngest revision...') #youngest_revision = fs.youngest_rev(fs_ptr) assert youngest_revision, "Unable to lookup youngest revision." last_sent_revision = get_last_revision() if youngest_revision == last_sent_revision: # no need to continue. we should be up to date. print('done, up-to-date') return if last_sent_revision or youngest_revision < 10: # Only compare revisions if the DAT file contains a valid # revision number. Otherwise we risk waiting forever while # we parse and uploading every revision in the repo in the case # where a repository is retroactively configured to sync with ftp. pysvn_client = pysvn.Client() pysvn_client.callback_get_login = get_login rev1 = pysvn.Revision(pysvn.opt_revision_kind.number, last_sent_revision) rev2 = pysvn.Revision(pysvn.opt_revision_kind.number, youngest_revision) summary = pysvn_client.diff_summarize(repo_path, rev1, repo_path, rev2, True, False) print('summary len:',len(summary)) if len(summary) > 0 : print('connecting to %s...' % host) ftp = FTPClient(host, user, password) print('connected to %s' % host) ftp.base_path = remote_base_directory print('set remote base directory to %s' % remote_base_directory) #iterate through all the differences between revisions for change in summary : #determine whether the path of the change is relevant to the path that is being sent, and modify the path as appropriate. print('change path:',change.path) ftp_relative_path = apply_basedir(change.path) print('ftp rel path:',ftp_relative_path) #only try to sync path if the path is in our project_directory if ftp_relative_path != "" : is_file = (change.node_kind == pysvn.node_kind.file) if str(change.summarize_kind) == "delete" : print("deleting: " + ftp_relative_path) try: ftp.delete_path("/" + ftp_relative_path, is_file) except ftplib.error_perm as e: if 'cannot find the' in str(e) or 'not found' in str(e): # Log, but otherwise ignore path-not-found errors # when deleting, since it's not a disaster if the file # we want to delete is already gone. logging.error(captureErrorMessage(e)) else: raise elif str(change.summarize_kind) == "added" or str(change.summarize_kind) == "modified" : local_file = "" if is_file : local_file = svn_export_temp(pysvn_client, repo_path, rev2, change.path) print("uploading file: " + ftp_relative_path) ftp.upload_path("/" + ftp_relative_path, is_file, local_file) if is_file : os.remove(local_file) elif str(change.summarize_kind) == "normal" : print("skipping 'normal' element: " + ftp_relative_path) else : raise str("Unknown change summarize kind: " + str(change.summarize_kind) + ", path: " + ftp_relative_path) ftp.close() #write back the last revision that was synced print("writing last revision: " + str(youngest_revision)) set_last_revision(youngest_revision) # todo: undo def get_login(a,b,c,d): #arguments don't matter, we're always going to return the same thing try: return True, "svnUsername", "svnPassword", True except Exception as e: logging.error(e) #capture the location of the error frame = inspect.currentframe() stack_trace = traceback.format_stack(frame) logging.debug(stack_trace) #end capture sys.exit(1) #functions for persisting the last successfully synced revision def get_last_revision(): if os.path.isfile(status_file) : f=open(status_file, 'r') line = f.readline() f.close() try: i = int(line) except ValueError: i = 0 else: i = 0 f = open(status_file, 'w') f.write(str(i)) f.close() return i def set_last_revision(rev) : f = open(status_file, 'w') f.write(str(rev)) f.close() #augmented ftp client class that can work off a base directory class FTPClient(ftplib.FTP) : def __init__(self, host, username, password) : self.base_path = "" self.current_path = "" ftplib.FTP.__init__(self, host, username, password) def cwd(self, path) : debug_path = path if self.current_path == "" : self.current_path = self.pwd() print("pwd: " + self.current_path) if not os.path.isabs(path) : debug_path = self.base_path + "<" + path path = os.path.join(self.current_path, path) elif self.base_path != "" : debug_path = self.base_path + ">" + path.lstrip("/") path = os.path.join(self.base_path, path.lstrip("/")) path = os.path.normpath(path) #by this point the path should be absolute. if path != self.current_path : print("change from " + self.current_path + " to " + debug_path) ftplib.FTP.cwd(self, path) self.current_path = path else : print("staying put : " + self.current_path) def cd_or_create(self, path) : assert os.path.isabs(path), "absolute path expected (" + path + ")" try: self.cwd(path) except ftplib.error_perm as e: for folder in path.split('/'): if folder == "" : self.cwd("/") continue try: self.cwd(folder) except: print("mkd: (" + path + "):" + folder) self.mkd(folder) self.cwd(folder) def upload_path(self, path, is_file, local_path) : if is_file: (path, filename) = os.path.split(path) self.cd_or_create(path) # Use read-binary to avoid universal newline support from stripping CR characters. f = open(local_path, 'rb') self.storbinary("STOR " + filename, f) f.close() else: self.cd_or_create(path) def delete_path(self, path, is_file) : (path, filename) = os.path.split(path) print("trying to delete: " + path + ", " + filename) self.cwd(path) try: if is_file : self.delete(filename) else: self.delete_path_recursive(filename) except ftplib.error_perm as e: if 'The system cannot find the' in str(e) or '550 File not found' in str(e): # Log, but otherwise ignore path-not-found errors # when deleting, since it's not a disaster if the file # we want to delete is already gone. logging.error(captureErrorMessage(e)) else: raise def delete_path_recursive(self, path): if path == "/" : raise "WARNING: trying to delete '/'!" for node in self.nlst(path) : if node == path : #it's a file. delete and return self.delete(path) return if node != "." and node != ".." : self.delete_path_recursive(os.path.join(path, node)) try: self.rmd(path) except ftplib.error_perm as msg : sys.stderr.write("Error deleting directory " + os.path.join(self.current_path, path) + " : " + str(msg)) # apply the project_directory setting def apply_basedir(path) : #remove any leading stuff (in this case, "trunk/") and decide whether file should be propagated if not path.startswith(project_directory) : return "" return path.replace(project_directory, "", 1) def svn_export_temp(pysvn_client, base_path, rev, path) : # Causes access denied error. Couldn't deduce Windows-perm issue. # It's possible Python isn't garbage-collecting the open file-handle in time for pysvn to re-open it. # Regardless, just generating a simple filename seems to work. #(fd, dest_path) = tempfile.mkstemp() dest_path = tmpName = '%s.tmp' % __file__ exportPath = os.path.join(base_path, path).replace('\\','/') print('exporting %s to %s' % (exportPath, dest_path)) pysvn_client.export( exportPath, dest_path, force=False, revision=rev, native_eol=None, ignore_externals=False, recurse=True, peg_revision=rev ) return dest_path if __name__ == "__main__": logging.info('svnftp.start') try: main() logging.info('svnftp.done') except Exception as e: # capture the location of the error for debug purposes frame = inspect.currentframe() stack_trace = traceback.format_stack(frame) logging.debug(stack_trace[:-1]) print(stack_trace) # end capture error_text = '\nFATAL EXCEPTION!!!\n'+captureErrorMessage(e) subject = "ALERT: SVN2FTP Error" message = """An Error occurred while trying to FTP an SVN commit. repo_path = %(repo_path)s\n local_repos_path = %(local_repos_path)s\n project_directory = %(project_directory)s\n remote_base_directory = %(remote_base_directory)s\n error_text = %(error_text)s """ % globals() email(toAddrs, message, subject) logging.error(e) Notes/Disclaimers: I have basically no python training so I'm learning as I go and spending lots of time reading docs to figure stuff out. The body of get_login is in a try block because I was getting strange errors saying there was an unhandled exception in callback_get_login. Never figured out why, but it seems fine now. Let sleeping dogs lie, right? The username and password for get_login are currently hard-coded (but correct) just to eliminate variables and try to change as little as possible at once. (I added the svnuser and svnpass arguments to the existing argument parsing.) So that's where I am. I can't figure out why on earth it's not printing anything into svn2ftp.out.log. If you're wondering, the output for one of these failed attempts in svn2ftp.debug.log is: 2012-09-06 15:18:12,496 INFO svnftp.start 2012-09-06 15:18:12,496 INFO svnftp.done And it's no different on a successful run. So there's nothing useful being logged. I'm lost. I've gone way down the rabbit hole on this one, and don't know where to go from here. Any ideas?

Read the article

c++ optimize array of ints

- by a432511

I have a 2D lookup table of int16_t. int16_t my_array[37][73] = {{**DATA HERE**}} I have a mixture of values that range from just above the range of int8_t to just below the range of int8_t and some of the values repeat themselves. I am trying to reduce the size of this lookup table. What I have done so far is split each int16_t value into two int8_t values to visualize the wasted bytes. int8_t part_1 = original_value >> 4; int8_t part_2 = original_value & 0x0000FFFF; // If the upper 4 bits of the original_value were empty if(part_1 == 0) wasted_bytes_count++; I can easily remove the zero value int8_t that are wasting a byte of space and I can also remove the duplicate values, but my question is how do I do remove those values while retaining the ability to lookup based on the two indices? I contemplated translating this into a 1D array and adding a number following each duplicated value that would represent the number of duplicates that were removed, but I am struggling with how I would then identify what is a lookup value and what is a duplicate count. Also, it is further complicated by stripping out the zero int8_t values that were wasted bytes. EDIT: This array is stored in ROM already. RAM is even more limited than ROM so it is already stored in ROM. EDIT: I am going to post a bounty for this question as soon as I can. I need a complete answer of how to store the information AND retrieve it. It does not need to be a 2D array as long as I can get the same values. EDIT: Adding the actual array below: {150,145,140,135,130,125,120,115,110,105,100,95,90,85,80,75,70,65,60,55,50,45,40,35,30,25,20,15,10,5,0,-4,-9,-14,-19,-24,-29,-34,-39,-44,-49,-54,-59,-64,-69,-74,-79,-84,-89,-94,-99,104,109,114,119,124,129,134,139,144,149,154,159,164,169,174,179,175,170,165,160,155,150}, \ {143,137,131,126,120,115,110,105,100,95,90,85,80,75,71,66,62,57,53,48,44,39,35,31,27,22,18,14,9,5,1,-3,-7,-11,-16,-20,-25,-29,-34,-38,-43,-47,-52,-57,-61,-66,-71,-76,-81,-86,-91,-96,101,107,112,117,123,128,134,140,146,151,157,163,169,175,178,172,166,160,154,148,143}, \ {130,124,118,112,107,101,96,92,87,82,78,74,70,65,61,57,54,50,46,42,38,34,31,27,23,19,16,12,8,4,1,-2,-6,-10,-14,-18,-22,-26,-30,-34,-38,-43,-47,-51,-56,-61,-65,-70,-75,-79,-84,-89,-94,100,105,111,116,122,128,135,141,148,155,162,170,177,174,166,159,151,144,137,130}, \ {111,104,99,94,89,85,81,77,73,70,66,63,60,56,53,50,46,43,40,36,33,30,26,23,20,16,13,10,6,3,0,-3,-6,-9,-13,-16,-20,-24,-28,-32,-36,-40,-44,-48,-52,-57,-61,-65,-70,-74,-79,-84,-88,-93,-98,103,109,115,121,128,135,143,152,162,172,176,165,154,144,134,125,118,111}, \ {85,81,77,74,71,68,65,63,60,58,56,53,51,49,46,43,41,38,35,32,29,26,23,19,16,13,10,7,4,1,-1,-3,-6,-9,-13,-16,-19,-23,-26,-30,-34,-38,-42,-46,-50,-54,-58,-62,-66,-70,-74,-78,-83,-87,-91,-95,100,105,110,117,124,133,144,159,178,160,141,125,112,103,96,90,85}, \ {62,60,58,57,55,54,52,51,50,48,47,46,44,42,41,39,36,34,31,28,25,22,19,16,13,10,7,4,2,0,-3,-5,-8,-10,-13,-16,-19,-22,-26,-29,-33,-37,-41,-45,-49,-53,-56,-60,-64,-67,-70,-74,-77,-80,-83,-86,-89,-91,-94,-97,101,105,111,130,109,84,77,74,71,68,66,64,62}, \ {46,46,45,44,44,43,42,42,41,41,40,39,38,37,36,35,33,31,28,26,23,20,16,13,10,7,4,1,-1,-3,-5,-7,-9,-12,-14,-16,-19,-22,-26,-29,-33,-36,-40,-44,-48,-51,-55,-58,-61,-64,-66,-68,-71,-72,-74,-74,-75,-74,-72,-68,-61,-48,-25,2,22,33,40,43,45,46,47,46,46}, \ {36,36,36,36,36,35,35,35,35,34,34,34,34,33,32,31,30,28,26,23,20,17,14,10,6,3,0,-2,-4,-7,-9,-10,-12,-14,-15,-17,-20,-23,-26,-29,-32,-36,-40,-43,-47,-50,-53,-56,-58,-60,-62,-63,-64,-64,-63,-62,-59,-55,-49,-41,-30,-17,-4,6,15,22,27,31,33,34,35,36,36}, \ {30,30,30,30,30,30,30,29,29,29,29,29,29,29,29,28,27,26,24,21,18,15,11,7,3,0,-3,-6,-9,-11,-12,-14,-15,-16,-17,-19,-21,-23,-26,-29,-32,-35,-39,-42,-45,-48,-51,-53,-55,-56,-57,-57,-56,-55,-53,-49,-44,-38,-31,-23,-14,-6,0,7,13,17,21,24,26,27,29,29,30}, \ {25,25,26,26,26,25,25,25,25,25,25,25,25,26,25,25,24,23,21,19,16,12,8,4,0,-3,-7,-10,-13,-15,-16,-17,-18,-19,-20,-21,-22,-23,-25,-28,-31,-34,-37,-40,-43,-46,-48,-49,-50,-51,-51,-50,-48,-45,-42,-37,-32,-26,-19,-13,-7,-1,3,7,11,14,17,19,21,23,24,25,25}, \ {21,22,22,22,22,22,22,22,22,22,22,22,22,22,22,22,21,20,18,16,13,9,5,1,-3,-7,-11,-14,-17,-18,-20,-21,-21,-22,-22,-22,-23,-23,-25,-27,-29,-32,-35,-37,-40,-42,-44,-45,-45,-45,-44,-42,-40,-36,-32,-27,-22,-17,-12,-7,-3,0,3,7,9,12,14,16,18,19,20,21,21}, \ {18,19,19,19,19,19,19,19,19,19,19,19,19,19,19,19,18,17,16,14,10,7,2,-1,-6,-10,-14,-17,-19,-21,-22,-23,-24,-24,-24,-24,-23,-23,-23,-24,-26,-28,-30,-33,-35,-37,-38,-39,-39,-38,-36,-34,-31,-28,-24,-19,-15,-10,-6,-3,0,1,4,6,8,10,12,14,15,16,17,18,18}, \ {16,16,17,17,17,17,17,17,17,17,17,16,16,16,16,16,16,15,13,11,8,4,0,-4,-9,-13,-16,-19,-21,-23,-24,-25,-25,-25,-25,-24,-23,-21,-20,-20,-21,-22,-24,-26,-28,-30,-31,-32,-31,-30,-29,-27,-24,-21,-17,-13,-9,-6,-3,-1,0,2,4,5,7,9,10,12,13,14,15,16,16}, \ {14,14,14,15,15,15,15,15,15,15,14,14,14,14,14,14,13,12,11,9,5,2,-2,-6,-11,-15,-18,-21,-23,-24,-25,-25,-25,-25,-24,-22,-21,-18,-16,-15,-15,-15,-17,-19,-21,-22,-24,-24,-24,-23,-22,-20,-18,-15,-12,-9,-5,-3,-1,0,1,2,4,5,6,8,9,10,11,12,13,14,14}, \ {12,13,13,13,13,13,13,13,13,13,13,13,12,12,12,12,11,10,9,6,3,0,-4,-8,-12,-16,-19,-21,-23,-24,-24,-24,-24,-23,-22,-20,-17,-15,-12,-10,-9,-9,-10,-12,-13,-15,-17,-17,-18,-17,-16,-15,-13,-11,-8,-5,-3,-1,0,1,1,2,3,4,6,7,8,9,10,11,12,12,12}, \ {11,11,11,11,11,12,12,12,12,12,11,11,11,11,11,10,10,9,7,5,2,-1,-5,-9,-13,-17,-20,-22,-23,-23,-23,-23,-22,-20,-18,-16,-14,-11,-9,-6,-5,-4,-5,-6,-8,-9,-11,-12,-12,-12,-12,-11,-9,-8,-6,-3,-1,0,0,1,1,2,3,4,5,6,7,8,9,10,11,11,11}, \ {10,10,10,10,10,10,10,10,10,10,10,10,10,10,9,9,9,7,6,3,0,-3,-6,-10,-14,-17,-20,-21,-22,-22,-22,-21,-19,-17,-15,-13,-10,-8,-6,-4,-2,-2,-2,-2,-4,-5,-7,-8,-8,-9,-8,-8,-7,-5,-4,-2,0,0,1,1,1,2,2,3,4,5,6,7,8,9,10,10,10}, \ {9,9,9,9,9,9,9,10,10,9,9,9,9,9,9,8,8,6,5,2,0,-4,-7,-11,-15,-17,-19,-21,-21,-21,-20,-18,-16,-14,-12,-10,-8,-6,-4,-2,-1,0,0,0,-1,-2,-4,-5,-5,-6,-6,-5,-5,-4,-3,-1,0,0,1,1,1,1,2,3,3,5,6,7,8,8,9,9,9}, \ {9,9,9,9,9,9,9,9,9,9,9,9,8,8,8,8,7,5,4,1,-1,-5,-8,-12,-15,-17,-19,-20,-20,-19,-18,-16,-14,-11,-9,-7,-5,-4,-2,-1,0,0,1,1,0,0,-2,-3,-3,-4,-4,-4,-3,-3,-2,-1,0,0,0,0,0,1,1,2,3,4,5,6,7,8,8,9,9}, \ {9,9,9,8,8,8,9,9,9,9,9,8,8,8,8,7,6,5,3,0,-2,-5,-9,-12,-15,-17,-18,-19,-19,-18,-16,-14,-12,-9,-7,-5,-4,-2,-1,0,0,1,1,1,1,0,0,-1,-2,-2,-3,-3,-2,-2,-1,-1,0,0,0,0,0,0,0,1,2,3,4,5,6,7,8,8,9}, \ {8,8,8,8,8,8,9,9,9,9,9,9,8,8,8,7,6,4,2,0,-3,-6,-9,-12,-15,-17,-18,-18,-17,-16,-14,-12,-10,-8,-6,-4,-2,-1,0,0,1,2,2,2,2,1,0,0,-1,-1,-1,-2,-2,-1,-1,0,0,0,0,0,0,0,0,0,1,2,3,4,5,6,7,8,8}, \ {8,8,8,8,9,9,9,9,9,9,9,9,9,8,8,7,5,3,1,-1,-4,-7,-10,-13,-15,-16,-17,-17,-16,-15,-13,-11,-9,-6,-5,-3,-2,0,0,0,1,2,2,2,2,1,1,0,0,0,-1,-1,-1,-1,-1,0,0,0,0,-1,-1,-1,-1,-1,0,0,1,3,4,5,7,7,8}, \ {8,8,9,9,9,9,10,10,10,10,10,10,10,9,8,7,5,3,0,-2,-5,-8,-11,-13,-15,-16,-16,-16,-15,-13,-12,-10,-8,-6,-4,-2,-1,0,0,1,2,2,3,3,2,2,1,0,0,0,0,0,0,0,0,0,0,-1,-1,-2,-2,-2,-2,-2,-1,0,0,1,3,4,6,7,8}, \ {7,8,9,9,9,10,10,11,11,11,11,11,10,10,9,7,5,3,0,-2,-6,-9,-11,-13,-15,-16,-16,-15,-14,-13,-11,-9,-7,-5,-3,-2,0,0,1,1,2,3,3,3,3,2,2,1,1,0,0,0,0,0,0,0,-1,-1,-2,-3,-3,-4,-4,-4,-3,-2,-1,0,1,3,5,6,7}, \ {6,8,9,9,10,11,11,12,12,12,12,12,11,11,9,7,5,2,0,-3,-7,-10,-12,-14,-15,-16,-15,-15,-13,-12,-10,-8,-7,-5,-3,-1,0,0,1,2,2,3,3,4,3,3,3,2,2,1,1,1,0,0,0,0,-1,-2,-3,-4,-4,-5,-5,-5,-5,-4,-2,-1,0,2,3,5,6}, \ {6,7,8,10,11,12,12,13,13,14,14,13,13,11,10,8,5,2,0,-4,-8,-11,-13,-15,-16,-16,-16,-15,-13,-12,-10,-8,-6,-5,-3,-1,0,0,1,2,3,3,4,4,4,4,4,3,3,3,2,2,1,1,0,0,-1,-2,-3,-5,-6,-7,-7,-7,-6,-5,-4,-3,-1,0,2,4,6}, \ {5,7,8,10,11,12,13,14,15,15,15,14,14,12,11,8,5,2,-1,-5,-9,-12,-14,-16,-17,-17,-16,-15,-14,-12,-11,-9,-7,-5,-3,-1,0,0,1,2,3,4,4,5,5,5,5,5,5,4,4,3,3,2,1,0,-1,-2,-4,-6,-7,-8,-8,-8,-8,-7,-6,-4,-2,0,1,3,5}, \ {4,6,8,10,12,13,14,15,16,16,16,16,15,13,11,9,5,2,-2,-6,-10,-13,-16,-17,-18,-18,-17,-16,-15,-13,-11,-9,-7,-5,-4,-2,0,0,1,3,3,4,5,6,6,7,7,7,7,7,6,5,4,3,2,0,-1,-3,-5,-7,-8,-9,-10,-10,-10,-9,-7,-5,-4,-1,0,2,4}, \ {4,6,8,10,12,14,15,16,17,18,18,17,16,15,12,9,5,1,-3,-8,-12,-15,-18,-19,-20,-20,-19,-18,-16,-15,-13,-11,-8,-6,-4,-2,-1,0,1,3,4,5,6,7,8,9,9,9,9,9,9,8,7,5,3,1,-1,-3,-6,-8,-10,-11,-12,-12,-11,-10,-9,-7,-5,-2,0,1,4}, \ {4,6,8,11,13,15,16,18,19,19,19,19,18,16,13,10,5,0,-5,-10,-15,-18,-21,-22,-23,-22,-22,-20,-18,-17,-14,-12,-10,-8,-5,-3,-1,0,1,3,5,6,8,9,10,11,12,12,13,12,12,11,9,7,5,2,0,-3,-6,-9,-11,-12,-13,-13,-12,-11,-10,-8,-6,-3,-1,1,4}, \ {3,6,9,11,14,16,17,19,20,21,21,21,19,17,14,10,4,-1,-8,-14,-19,-22,-25,-26,-26,-26,-25,-23,-21,-19,-17,-14,-12,-9,-7,-4,-2,0,1,3,5,7,9,11,13,14,15,16,16,16,16,15,13,10,7,4,0,-3,-7,-10,-12,-14,-15,-14,-14,-12,-11,-9,-6,-4,-1,1,3}, \ {4,6,9,12,14,17,19,21,22,23,23,23,21,19,15,9,2,-5,-13,-20,-25,-28,-30,-31,-31,-30,-29,-27,-25,-22,-20,-17,-14,-11,-9,-6,-3,0,1,4,6,9,11,13,15,17,19,20,21,21,21,20,18,15,11,6,2,-2,-7,-11,-13,-15,-16,-16,-15,-13,-11,-9,-7,-4,-1,1,4}, \ {4,7,10,13,15,18,20,22,24,25,25,25,23,20,15,7,-2,-12,-22,-29,-34,-37,-38,-38,-37,-36,-34,-31,-29,-26,-23,-20,-17,-13,-10,-7,-4,-1,2,5,8,11,13,16,18,21,23,24,26,26,26,26,24,21,17,12,5,0,-6,-10,-14,-16,-16,-16,-15,-14,-12,-10,-7,-4,-1,1,4}, \ {4,7,10,13,16,19,22,24,26,27,27,26,24,19,11,-1,-15,-28,-37,-43,-46,-47,-47,-45,-44,-41,-39,-36,-32,-29,-26,-22,-19,-15,-11,-8,-4,-1,2,5,9,12,15,19,22,24,27,29,31,33,33,33,32,30,26,21,14,6,0,-6,-11,-14,-15,-16,-15,-14,-12,-9,-7,-4,-1,1,4}, \ {6,9,12,15,18,21,23,25,27,28,27,24,17,4,-14,-34,-49,-56,-60,-60,-60,-58,-56,-53,-50,-47,-43,-40,-36,-32,-28,-25,-21,-17,-13,-9,-5,-1,2,6,10,14,17,21,24,28,31,34,37,39,41,42,43,43,41,38,33,25,17,8,0,-4,-8,-10,-10,-10,-8,-7,-4,-2,0,3,6}, \ {22,24,26,28,30,32,33,31,23,-18,-81,-96,-99,-98,-95,-93,-89,-86,-82,-78,-74,-70,-66,-62,-57,-53,-49,-44,-40,-36,-32,-27,-23,-19,-14,-10,-6,-1,2,6,10,15,19,23,27,31,35,38,42,45,49,52,55,57,60,61,63,63,62,61,57,53,47,40,33,28,23,21,19,19,19,20,22}, \ {168,173,178,176,171,166,161,156,151,146,141,136,131,126,121,116,111,106,101,-96,-91,-86,-81,-76,-71,-66,-61,-56,-51,-46,-41,-36,-31,-26,-21,-16,-11,-6,-1,3,8,13,18,23,28,33,38,43,48,53,58,63,68,73,78,83,88,93,98,103,108,113,118,123,128,133,138,143,148,153,158,163,168}, \ Thanks for your time.

Read the article

Top 20 Daily Deal Sites In India

- by Damodhar

If you have never heard of Groupon recently, you probably are not working in the tech industry because it is all over the blogosphere. After all, growing from zero to US$1.35 billion valuation in 18 months is pretty AMAZING. Inspired by this, the following bunch of Groupon clone’s are already rising in India. Definitely this business model is emerging and changes the way online shopping happens in India. SnapDeal SnapDeal features a Best deals Coupons at an unbeatable price on the best stuff to do, see, eat, and buy in our city. It provides vouchers and discounts in all the major cities like Delhi, Mumbai, Chennai and Bangalore. KhojGuru Exclusive Discount coupons from hundreds of brands and retailers. These discounts can be easily downloaded as an SMS on to the mobile phone or their print out can be taken. MyDala A platform which gets us great deals in our city.Leveraging the “power of group buying”. Group buying happens when like minded people come together to get deals that we can never get on our own as individuals. SoSasta Great place which would not only tell us about the hidden treasures of our city — but also made them affordable to us at the end of the month. DealsAndYou Deals and You is a group buying portal that features a daily deal on the best stuff in some of India’s leading cities. AajKaCatch Its concept is to provide you the most unique, useful and qualitative product at a very low price. So you can now shop without the hassles of clustered products. BindassBargain Bindaas Bargain offers a new deal every day! Great stuff ranging from cool gadgets, home theatres, luxury watches, smash games. MasthiDeals It get you a great deal on a great stuff to do, eat, buy or see in your city. They have a team of about 25 wonderful people working in Chennai office working side by side with folks in MasthiDeal’s other cities. Koovs Founded by a team of IIT alumni who have brought in their expertise from the internet industry. Koovs is a Bangalore based start up and one point solution for all your desires. Taggle It brings you a variety of offers from some of the most respected brands in the country.This website uses collective buying to create a win-win for local businesses and their customers. BuzzInTown Buzzintown.com is a portal owned by Wortal Inc. There are a US headquartered company, with a presence pan-India through their India subsidiary, managed by a vastly experienced set of global leaders from the media, entertainment and technology industries. BuyThePrice It lines up the best win – win deals for both consumers and vendors and also ensures that each of the orders are dispatched in the shortest time possible. 24HoursLoot 24hoursLoot is an online store for selling a new t-shirt (sometime other products) everyday at deep discounted price in limited quantity/stock. DealMagic Customers get exposure to the best their city has to offer, at unbeatable prices (50-90% off). We never feature more than one business on our website on any given day, so we have to be very very selective on who gets featured. Dealivore ICUMI Technologies Pvt Ltd is the company operating the Dealivore service. Founded in December 2009, ICUMI is privately owned and funded. LootMore An online store that exclusively focuses on selling cool quality stuff at cheap prices. Here you’ll always find the latest and greatest brands at prices you can afford. Foodome The deals features the best coupons at an unbeatable price on restaurants, fine dining on where to spend your birthday party.They provide coupon only in Chennai as of now. Top Online Shopping Sites- Nation Wide ebay.in eBay is The World’s Online Marketplace, enabling trade on a local, national and international basis. With a diverse and passionate community of individuals and small businesses, eBay offers an online platform where millions of items are traded each day. FutureBazzar Future Group, led by its founder and Group CEO, Mr. Kishore Biyani, is one of India’s leading business houses with multiple businesses spanning across the consumption space. TradeUs Launched in July 2009 and in a short span of time it has turned into one of India’s foremost shopping portals setting the Indian e-commerce abode aflame. BigShoeBazzar (BSB) is the largest online authorized shoe store in South Asia. Croma Promoted by Infiniti Retail Ltd, a 100% subsidiary of Tata Sons.One of the world’s leading retailers, ensuring that you buy nothing but the best. This article titled,Top 20 Daily Deal Sites In India, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

- by Jason Fitzpatrick

You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

Read the article

SQL SERVER – SSMS: Memory Usage By Memory Optimized Objects Report

- by Pinal Dave

At conferences and at speaking engagements at the local UG, there is one question that keeps on coming which I wish were never asked. The question around, “Why is SQL Server using up all the memory and not releasing even when idle?” Well, the answer can be long and with the release of SQL Server 2014, this got even more complicated. This release of SQL Server 2014 has the option of introducing In-Memory OLTP which is completely new concept and our dependency on memory has increased multifold. In reality, nothing much changes but we have memory optimized objects (Tables and Stored Procedures) additional which are residing completely in memory and improving performance. As a DBA, it is humanly impossible to get a hang of all the innovations and the new features introduced in the next version. So today’s blog is around the report added to SSMS which gives a high level view of this new feature addition. This reports is available only from SQL Server 2014 onwards because the feature was introduced in SQL Server 2014. Earlier versions of SQL Server Management Studio would not show the report in the list. If we try to launch the report on the database which is not having In-Memory File group defined, then we would see the message in report. To demonstrate, I have created new fresh database called MemoryOptimizedDB with no special file group. Here is the query used to identify whether a database has memory-optimized file group or not. SELECT TOP(1) 1 FROM sys.filegroups FG WHERE FG.[type] = 'FX' Once we add filegroup using below command, we would see different version of report. USE [master] GO ALTER DATABASE [MemoryOptimizedDB] ADD FILEGROUP [IMO_FG] CONTAINS MEMORY_OPTIMIZED_DATA GO The report is still empty because we have not defined any Memory Optimized table in the database. Total allocated size is shown as 0 MB. Now, let’s add the folder location into the filegroup and also created few in-memory tables. We have used the nomenclature of IMO to denote “InMemory Optimized” objects. USE [master] GO ALTER DATABASE [MemoryOptimizedDB] ADD FILE ( NAME = N'MemoryOptimizedDB_IMO', FILENAME = N'E:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\MemoryOptimizedDB_IMO') TO FILEGROUP [IMO_FG] GO You may have to change the path based on your SQL Server configuration. Below is the script to create the table. USE MemoryOptimizedDB GO --Drop table if it already exists. IF OBJECT_ID('dbo.SQLAuthority','U') IS NOT NULL DROP TABLE dbo.SQLAuthority GO CREATE TABLE dbo.SQLAuthority ( ID INT IDENTITY NOT NULL, Name CHAR(500) COLLATE Latin1_General_100_BIN2 NOT NULL DEFAULT 'Pinal', CONSTRAINT PK_SQLAuthority_ID PRIMARY KEY NONCLUSTERED (ID), INDEX hash_index_sample_memoryoptimizedtable_c2 HASH (Name) WITH (BUCKET_COUNT = 131072) ) WITH (MEMORY_OPTIMIZED = ON, DURABILITY = SCHEMA_AND_DATA) GO As soon as above script is executed, table and index both are created. If we run the report again, we would see something like below. Notice that table memory is zero but index is using memory. This is due to the fact that hash index needs memory to manage the buckets created. So even if table is empty, index would consume memory. More about the internals of how In-Memory indexes and tables work will be reserved for future posts. Now, use below script to populate the table with 10000 rows INSERT INTO SQLAuthority VALUES (DEFAULT) GO 10000 Here is the same report after inserting 1000 rows into our InMemory table. There are total three sections in the whole report. Total Memory consumed by In-Memory Objects Pie chart showing memory distribution based on type of consumer – table, index and system. Details of memory usage by each table. The information about all three is taken from one single DMV, sys.dm_db_xtp_table_memory_stats This DMV contains memory usage statistics for both user and system In-Memory tables. If we query the DMV and look at data, we can easily notice that the system tables have negative object IDs. So, to look at user table memory usage, below is the over-simplified version of query. USE MemoryOptimizedDB GO SELECT OBJECT_NAME(OBJECT_ID), * FROM sys.dm_db_xtp_table_memory_stats WHERE OBJECT_ID > 0 GO This report would help DBA to identify which in-memory object taking lot of memory which can be used as a pointer for designing solution. I am sure in future we will discuss at lengths the whole concept of In-Memory tables in detail over this blog. To read more about In-Memory OLTP, have a look at In-Memory OLTP Series at Balmukund’s Blog. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Memory, SQL Reports

Read the article

Lessons from a SAN Failure

- by Bill Graziano

At 1:10AM Sunday morning the main SAN at one of my clients suffered a “partial” failure. Partial means that the SAN was still online and functioning but the LUNs attached to our two main SQL Servers “failed”. Failed means that SQL Server wouldn’t start and the MDF and LDF files mostly showed a zero file size. But they were online and responding and most other LUNs were available. I’m not sure how SANs know to fail at 1AM on a Saturday night but they seem to. From a personal standpoint this worked out poorly: I was out with friends and after more than a few drinks. From a work standpoint this was about the best time to fail you could imagine. Everything was running well before Monday morning. But it was a long, long Sunday. I started tipsy, got tired and ended up hung over later in the day. Note to self: Try not to go out drinking right before the SAN fails. This caught us at an interesting time. We’re in the process of migrating to an entirely new set of servers so some things were partially moved. This made it difficult to follow our procedures as cleanly as we’d like. The benefit was that we had much better documentation of everything on the server. I would encourage everyone to really think through the process of implementing your DR plan and document as much as possible. Following a checklist is much easier than trying to remember at night under pressure in a hurry after a few drinks. I had a series of estimates on how long things would take. They were accurate for any single server failure. They weren’t accurate for a SAN failure that took two servers down. This wasn’t bad but we should have communicated better. Don’t forget how many things are outside the database. Logins, linked servers, DTS packages (yikes!), jobs, service broker, DTC (especially DTC), database triggers and any objects in the master database are all things you need backed up. We’d done a decent job on this and didn’t find significant problems here. That said this still took a lot of time. There were many annoyances as a result of this. Small settings like a login’s default database had a big impact on whether an application could run. This is probably the single biggest area of concern when looking to recreate a server. I’d encourage everyone to go through every single node of SSMS and look for user created objects or settings outside the database. Script out your logins with the proper SID and already encrypted passwords and keep it updated. This makes life so much easier. I used an approach based on KB246133 that worked well. I’ll get my scripts posted over the next few days. The disaster can cause your DR process to fail in unexpected ways. We have a job that scripts out all logins and role memberships and writes it to a file. This runs on the DR server and pulls from the production server. Upon opening the file I found that the contents were a “server not found” error. Fortunately we had other copies and didn’t need to try and restore the master database. This now runs on the production server and pushes the script to the DR site. Soon we’ll get it pushed to our version control software. One of the biggest challenges is keeping your DR resources up to date. Any server change (new linked server, new SQL Server Agent job, etc.) means that your DR plan (and scripts) is out of date. It helps to automate the generation of these resources if possible. Take time now to test your database restore process. We test ours quarterly. If you have a large database I’d also encourage you to invest in a compressed backup solution. Restoring backups was the single larger consumer of time during our recovery. And yes, there’s a database mirroring solution planned in our new architecture. I didn’t have much involvement in things outside SQL Server but this caused many, many things to change in our environment. Many applications today aren’t just executables or web sites. They are a combination of those plus network infrastructure, reports, network ports, IP addresses, DTS and SSIS packages, batch systems and many other things. These all needed a little bit of attention to make sure they were functioning properly. Profiler turned out to be a handy tool. I started a trace for failed logins and kept that running. That let me fix a number of problems before people were able to report them. I also ran traces to capture exceptions. This helped identify problems with linked servers. Overall the thing that gave me the most problem was linked servers. In order for a linked server to function properly you need to be pointed to the right server, have the proper login information, have the network routes available and have MSDTC configured properly. We have a lot of linked servers and this created many failure points. Some of the older linked servers used IP addresses and not DNS names. This meant we had to go in and touch all those linked servers when the servers moved.

Read the article

SQL SERVER – SSMS: Backup and Restore Events Report

- by Pinal Dave

A DBA wears multiple hats and in fact does more than what an eye can see. One of the core task of a DBA is to take backups. This looks so trivial that most developers shrug this off as the only activity a DBA might be doing. I have huge respect for DBA’s all around the world because even if they seem cool with all the scripting, automation, maintenance works round the clock to keep the business working almost 365 days 24×7, their worth is knowing that one day when the systems / HDD crashes and you have an important delivery to make. So these backup tasks / maintenance jobs that have been done come handy and are no more trivial as they might seem to be as considered by many. So the important question like: “When was the last backup taken?”, “How much time did the last backup take?”, “What type of backup was taken last?” etc are tricky questions and this report lands answers to the same in a jiffy. So the SSMS report, we are talking can be used to find backups and restore operation done for the selected database. Whenever we perform any backup or restore operation, the information is stored in the msdb database. This report can utilize that information and provide information about the size, time taken and also the file location for those operations. Here is how this report can be launched. Once we launch this report, we can see 4 major sections shown as listed below. Average Time Taken For Backup Operations Successful Backup Operations Backup Operation Errors Successful Restore Operations Let us look at each section next. Average Time Taken For Backup Operations Information shown in “Average Time Taken For Backup Operations” section is taken from a backupset table in the msdb database. Here is the query and the expanded version of that particular section USE msdb; SELECT (ROW_NUMBER() OVER (ORDER BY t1.TYPE))%2 AS l1 , 1 AS l2 , 1 AS l3 , t1.TYPE AS [type] , (AVG(DATEDIFF(ss,backup_start_date, backup_finish_date)))/60.0 AS AverageBackupDuration FROM backupset t1 INNER JOIN sys.databases t3 ON ( t1.database_name = t3.name) WHERE t3.name = N'AdventureWorks2014' GROUP BY t1.TYPE ORDER BY t1.TYPE On my small database the time taken for differential backup was less than a minute, hence the value of zero is displayed. This is an important piece of backup operation which might help you in planning maintenance windows. Successful Backup Operations Here is the expanded version of this section. This information is derived from various backup tracking tables from msdb database. Here is the simplified version of the query which can be used separately as well. SELECT * FROM sys.databases t1 INNER JOIN backupset t3 ON (t3.database_name = t1.name) LEFT OUTER JOIN backupmediaset t5 ON ( t3.media_set_id = t5.media_set_id) LEFT OUTER JOIN backupmediafamily t6 ON ( t6.media_set_id = t5.media_set_id) WHERE (t1.name = N'AdventureWorks2014') ORDER BY backup_start_date DESC,t3.backup_set_id,t6.physical_device_name; The report does some calculations to show the data in a more readable format. For example, the backup size is shown in KB, MB or GB. I have expanded first row by clicking on (+) on “Device type” column. That has shown me the path of the physical backup file. Personally looking at this section, the Backup Size, Device Type and Backup Name are critical and are worth a note. As mentioned in the previous section, this section also has the Duration embedded inside it. Backup Operation Errors This section of the report gets data from default trace. You might wonder how. One of the event which is tracked by default trace is “ErrorLog”. This means that whatever message is written to errorlog gets written to default trace file as well. Interestingly, whenever there is a backup failure, an error message is written to ERRORLOG and hence default trace. This section takes advantage of that and shows the information. We can read below message under this section, which confirms above logic. No backup operations errors occurred for (AdventureWorks2014) database in the recent past or default trace is not enabled. Successful Restore Operations This section may not be very useful in production server (do you perform a restore of database?) but might be useful in the development and log shipping secondary environment, where we might be interested to see restore operations for a particular database. Here is the expanded version of the section. To fill this section of the report, I have restored the same backups which were taken to populate earlier sections. Here is the simplified version of the query used to populate this output. USE msdb; SELECT * FROM restorehistory t1 LEFT OUTER JOIN restorefile t2 ON ( t1.restore_history_id = t2.restore_history_id) LEFT OUTER JOIN backupset t3 ON ( t1.backup_set_id = t3.backup_set_id) WHERE t1.destination_database_name = N'AdventureWorks2014' ORDER BY restore_date DESC, t1.restore_history_id,t2.destination_phys_name Have you ever looked at the backup strategy of your key databases? Are they in sync and do we have scope for improvements? Then this is the report to analyze after a week or month of maintenance plans running in your database. Do chime in with what are the strategies you are using in your environments. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

Read the article

Searching for the last logon of users in Active Directory

- by Robert May

I needed to clean out a bunch of old accounts at Veracity Solutions, and wanted to delete those that hadn’t used their account in more than a year. I found that AD has a property on objects called the lastLogonTimestamp. However, this value isn’t exposed to you in any useful fashion. Sure, you can pull up ADSI Edit and and eventually get to it there, but it’s painful. I spent some time searching, and discovered that there’s not much out there to help, so I thought a blog post showing exactly how to get at this information would be in order. Basically, what you end up doing is using System.DirectoryServices to search for accounts and then filtering those for users, doing some conversion and such to make it happen. Basically, the end result of this is that you get a list of users with their logon information and you can then do with that what you will. I turned my list into an observable collection and bound it into a XAML form. One important note, you need to add a reference to ActiveDs Type Library in the COM section of the world in references to get to LargeInteger. Here’s the class: namespace Veracity.Utilities { using System; using System.Collections.Generic; using System.DirectoryServices; using ActiveDs; using log4net; /// <summary> /// Finds users inside of the active directory system. /// </summary> public class UserFinder { /// <summary> /// Creates the default logger /// </summary> private static readonly ILog log = LogManager.GetLogger(typeof(UserFinder)); /// <summary> /// Finds last logon information /// </summary> /// <param name="domain">The domain to search.</param> /// <param name="userName">The username for the query.</param> /// <param name="password">The password for the query.</param> /// <returns>A list of users with their last logon information.</returns> public IList<UserLoginInformation> GetLastLogonInformation(string domain, string userName, string password) { IList<UserLoginInformation> result = new List<UserLoginInformation>(); DirectoryEntry entry = new DirectoryEntry(domain, userName, password, AuthenticationTypes.Secure); DirectorySearcher directorySearcher = new DirectorySearcher(entry); directorySearcher.PropertyNamesOnly = true; directorySearcher.PropertiesToLoad.Add("name"); directorySearcher.PropertiesToLoad.Add("lastLogonTimeStamp"); SearchResultCollection searchResults; try { searchResults = directorySearcher.FindAll(); } catch (System.Exception ex) { log.Error("Failed to do a find all.", ex); throw; } try { foreach (SearchResult searchResult in searchResults) { DirectoryEntry resultEntry = searchResult.GetDirectoryEntry(); if (resultEntry.SchemaClassName == "user") { UserLoginInformation logon = new UserLoginInformation(); logon.Name = resultEntry.Name; PropertyValueCollection timeStampObject = resultEntry.Properties["lastLogonTimeStamp"]; if (timeStampObject.Count > 0) { IADsLargeInteger logonTimeStamp = (IADsLargeInteger)timeStampObject[0]; long lastLogon = (long)((uint)logonTimeStamp.LowPart + (((long)logonTimeStamp.HighPart) << 32)); logon.LastLogonTime = DateTime.FromFileTime(lastLogon); } result.Add(logon); } } } catch (System.Exception ex) { log.Error("Failed to iterate search results.", ex); throw; } return result; } } } Some important things to note: Username and Password can be set to null and if your computer us part of the domain, this may still work. Domain should be set to something like LDAP://servername/CN=Users,CN=Domain,CN=com You’re actually getting a com object back, so that’s why the LongInteger conversions are happening. The class for UserLoginInformation looks like this: namespace Veracity.Utilities { using System; /// <summary> /// Represents user login information. /// </summary> public class UserLoginInformation { /// <summary> /// Gets or sets Name /// </summary> public string Name { get; set; } /// <summary> /// Gets or sets LastLogonTime /// </summary> public DateTime LastLogonTime { get; set; } /// <summary> /// Gets the age of the account. /// </summary> public TimeSpan AccountAge { get { TimeSpan result = TimeSpan.Zero; if (this.LastLogonTime != DateTime.MinValue) { result = DateTime.Now.Subtract(this.LastLogonTime); } return result; } } } } I hope this is useful and instructive. Technorati Tags: Active Directory

Read the article

Big Data – Role of Cloud Computing in Big Data – Day 11 of 21

- by Pinal Dave

In yesterday’s blog post we learned the importance of the NewSQL. In this article we will understand the role of Cloud in Big Data Story What is Cloud? Cloud is the biggest buzzword around from last few years. Everyone knows about the Cloud and it is extremely well defined online. In this article we will discuss cloud in the context of the Big Data. Cloud computing is a method of providing a shared computing resources to the application which requires dynamic resources. These resources include applications, computing, storage, networking, development and various deployment platforms. The fundamentals of the cloud computing are that it shares pretty much share all the resources and deliver to end users as a service. Examples of the Cloud Computing and Big Data are Google and Amazon.com. Both have fantastic Big Data offering with the help of the cloud. We will discuss this later in this blog post. There are two different Cloud Deployment Models: 1) The Public Cloud and 2) The Private Cloud Public Cloud Public Cloud is the cloud infrastructure build by commercial providers (Amazon, Rackspace etc.) creates a highly scalable data center that hides the complex infrastructure from the consumer and provides various services. Private Cloud Private Cloud is the cloud infrastructure build by a single organization where they are managing highly scalable data center internally. Here is the quick comparison between Public Cloud and Private Cloud from Wikipedia: Public Cloud Private Cloud Initial cost Typically zero Typically high Running cost Unpredictable Unpredictable Customization Impossible Possible Privacy No (Host has access to the data Yes Single sign-on Impossible Possible Scaling up Easy while within defined limits Laborious but no limits Hybrid Cloud Hybrid Cloud is the cloud infrastructure build with the composition of two or more clouds like public and private cloud. Hybrid cloud gives best of the both the world as it combines multiple cloud deployment models together. Cloud and Big Data – Common Characteristics There are many characteristics of the Cloud Architecture and Cloud Computing which are also essentially important for Big Data as well. They highly overlap and at many places it just makes sense to use the power of both the architecture and build a highly scalable framework. Here is the list of all the characteristics of cloud computing important in Big Data Scalability Elasticity Ad-hoc Resource Pooling Low Cost to Setup Infastructure Pay on Use or Pay as you Go Highly Available Leading Big Data Cloud Providers There are many players in Big Data Cloud but we will list a few of the known players in this list. Amazon Amazon is arguably the most popular Infrastructure as a Service (IaaS) provider. The history of how Amazon started in this business is very interesting. They started out with a massive infrastructure to support their own business. Gradually they figured out that their own resources are underutilized most of the time. They decided to get the maximum out of the resources they have and hence they launched their Amazon Elastic Compute Cloud (Amazon EC2) service in 2006. Their products have evolved a lot recently and now it is one of their primary business besides their retail selling. Amazon also offers Big Data services understand Amazon Web Services. Here is the list of the included services: Amazon Elastic MapReduce – It processes very high volumes of data Amazon DynammoDB – It is fully managed NoSQL (Not Only SQL) database service Amazon Simple Storage Services (S3) – A web-scale service designed to store and accommodate any amount of data Amazon High Performance Computing – It provides low-tenancy tuned high performance computing cluster Amazon RedShift – It is petabyte scale data warehousing service Google Though Google is known for Search Engine, we all know that it is much more than that. Google Compute Engine – It offers secure, flexible computing from energy efficient data centers Google Big Query – It allows SQL-like queries to run against large datasets Google Prediction API – It is a cloud based machine learning tool Other Players Besides Amazon and Google we also have other players in the Big Data market as well. Microsoft is also attempting Big Data with the Cloud with Microsoft Azure. Additionally Rackspace and NASA together have initiated OpenStack. The goal of Openstack is to provide a massively scaled, multitenant cloud that can run on any hardware. Thing to Watch The cloud based solutions provides a great integration with the Big Data’s story as well it is very economical to implement as well. However, there are few things one should be very careful when deploying Big Data on cloud solutions. Here is a list of a few things to watch: Data Integrity Initial Cost Recurring Cost Performance Data Access Security Location Compliance Every company have different approaches to Big Data and have different rules and regulations. Based on various factors, one can implement their own custom Big Data solution on a cloud. Tomorrow In tomorrow’s blog post we will discuss about various Operational Databases supporting Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

Connection Pooling is Busted

- by MightyZot

A few weeks ago we started getting complaints about performance in an application that has performed very well for many years. The application is a n-tier application that uses ADODB with the SQLOLEDB provider to talk to a SQL Server database. Our object model is written in such a way that each public method validates security before performing requested actions, so there is a significant number of queries executed to get information about file cabinets, retrieve images, create workflows, etc. (PaperWise is a document management and workflow system.) A common factor for these customers is that they have remote offices connected via MPLS networks. Naturally, the first thing we looked at was the query performance in SQL Profiler. All of the queries were executing within expected timeframes, most of them were so fast that the duration in SQL Profiler was zero. After getting nowhere with SQL Profiler, the situation was escalated to me. I decided to take a peek with Process Monitor. Procmon revealed some “gaps” in the TCP/IP traffic. There were notable delays between send and receive pairs. The send and receive pairs themselves were quite snappy, but quite often there was a notable delay between a receive and the next send. You might expect some delay because, presumably, the application is doing some thinking in-between the pairs. But, comparing the procmon data at the remote locations with the procmon data for workstations on the local network showed that the remote workstations were significantly delayed. Procmon also showed a high number of disconnects. Wireshark traces showed that connections to the database were taking between 75ms and 150ms. Not only that, but connections to a file share containing images were taking 2 seconds! So, I asked about a trust. Sure enough there was a trust between two domains and the file share was on the second domain. Joining a remote workstation to the domain hosting the share containing images alleviated the time delay in accessing the file share. Removing the trust had no affect on the connections to the database. Microsoft Network Monitor includes filters that parse TDS packets. TDS is the protocol that SQL Server uses to communicate. There is a certificate exchange and some SSL that occurs during authentication. All of this was evident in the network traffic. After staring at the network traffic for a while, and examining packets, I decided to call it a night. On the way home that night, something about the traffic kept nagging at me. Then it dawned on me…at the beginning of the dance of packets between the client and the server all was well. Connection pooling was working and I could see multiple queries getting executed on the same connection and ethereal port. After a particular query, connecting to two different servers, I noticed that ADODB and SQLOLEDB started making repeated connections to the database on different ethereal ports. SQL Server would execute a single query and respond on a port, then open a new port and execute the next query. Connection pooling appeared to be broken. The next morning I wrote a test to confirm my hypothesis. Turns out that the sequence causing the connection nastiness goes something like this: Make a connection to the database. Open a result set that returns enough records to require multiple roundtrips to the server. For each result, query for some other data in the database (this will open a new implicit connection.) Close the inner result set and repeat for every item in the original result set. Close the original connection. Provided that the first result set returns enough data to require multiple roundtrips to the server, ADODB and SQLOLEDB will start making new connections to the database for each query executed in the loop. Originally, I thought this might be due to Microsoft’s denial of service (ddos) attack protection. After turning those features off to no avail, I eventually thought to switch my queries to client-side cursors instead of server-side cursors. Server-side cursors are the default, by the way. Voila! After switching to client-side cursors, the disconnects were gone and the above sequence yielded two connections as expected. While the real problem is the amount of time it takes to make connections over these MPLS networks (100ms on average), switching to client-side cursors made the problem go away. Believe it or not, this is actually documented by Microsoft, and rather difficult to find. (At least it was while we were trying to troubleshoot the problem!) So, if you’re noticing performance issues on slower networks, or networks with slower switching, take a look at the traffic in a tool like Microsoft Network Monitor. If you notice a high number of disconnects, and you’re using fire-hose or server-side cursors, then try switching to client-side cursors and you may see the problem go away. Most likely, Microsoft believes this to be appropriate behavior, because ADODB can’t guarantee that all of the data has been retrieved when you execute the inner queries. I’m not convinced, though, because the problem remains even after replacing all of the implicit connections with explicit connections and closing those connections in-between each of the inner queries. In that case, there doesn’t seem to be a reason why ADODB can’t use a single connection from the connection pool to make the additional queries, bringing the total number of connections to two. Instead ADO appears to make an assumption about the state of the connection. I’ve reported the behavior to Microsoft and am awaiting to hear from the appropriate team, so that I can demonstrate the problem. Maybe they can explain to us why this is appropriate behavior. :)

Read the article

SQL SERVER – CXPACKET – Parallelism – Usual Solution – Wait Type – Day 6 of 28

- by pinaldave

CXPACKET has to be most popular one of all wait stats. I have commonly seen this wait stat as one of the top 5 wait stats in most of the systems with more than one CPU. Books On-Line: Occurs when trying to synchronize the query processor exchange iterator. You may consider lowering the degree of parallelism if contention on this wait type becomes a problem. CXPACKET Explanation: When a parallel operation is created for SQL Query, there are multiple threads for a single query. Each query deals with a different set of the data (or rows). Due to some reasons, one or more of the threads lag behind, creating the CXPACKET Wait Stat. There is an organizer/coordinator thread (thread 0), which takes waits for all the threads to complete and gathers result together to present on the client’s side. The organizer thread has to wait for the all the threads to finish before it can move ahead. The Wait by this organizer thread for slow threads to complete is called CXPACKET wait. Note that not all the CXPACKET wait types are bad. You might experience a case when it totally makes sense. There might also be cases when this is unavoidable. If you remove this particular wait type for any query, then that query may run slower because the parallel operations are disabled for the query. Reducing CXPACKET wait: We cannot discuss about reducing the CXPACKET wait without talking about the server workload type. OLTP: On Pure OLTP system, where the transactions are smaller and queries are not long but very quick usually, set the “Maximum Degree of Parallelism” to 1 (one). This way it makes sure that the query never goes for parallelism and does not incur more engine overhead. EXEC sys.sp_configure N'cost threshold for parallelism', N'1' GO RECONFIGURE WITH OVERRIDE GO Data-warehousing / Reporting server: As queries will be running for long time, it is advised to set the “Maximum Degree of Parallelism” to 0 (zero). This way most of the queries will utilize the parallel processor, and long running queries get a boost in their performance due to multiple processors. EXEC sys.sp_configure N'cost threshold for parallelism', N'0' GO RECONFIGURE WITH OVERRIDE GO Mixed System (OLTP & OLAP): Here is the challenge. The right balance has to be found. I have taken a very simple approach. I set the “Maximum Degree of Parallelism” to 2, which means the query still uses parallelism but only on 2 CPUs. However, I keep the “Cost Threshold for Parallelism” very high. This way, not all the queries will qualify for parallelism but only the query with higher cost will go for parallelism. I have found this to work best for a system that has OLTP queries and also where the reporting server is set up. Here, I am setting ‘Cost Threshold for Parallelism’ to 25 values (which is just for illustration); you can choose any value, and you can find it out by experimenting with the system only. In the following script, I am setting the ‘Max Degree of Parallelism’ to 2, which indicates that the query that will have a higher cost (here, more than 25) will qualify for parallel query to run on 2 CPUs. This implies that regardless of the number of CPUs, the query will select any two CPUs to execute itself. EXEC sys.sp_configure N'cost threshold for parallelism', N'25' GO EXEC sys.sp_configure N'max degree of parallelism', N'2' GO RECONFIGURE WITH OVERRIDE GO Read all the post in the Wait Types and Queue series. Additionally a must read comment of Jonathan Kehayias. Note: The information presented here is from my experience and I no way claim it to be accurate. I suggest you all to read the online book for further clarification. All the discussion of Wait Stats over here is generic and it varies from system to system. It is recommended that you test this on the development server before implementing on the production server. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: DMV, Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology

Search Results

Search found 3141 results on 126 pages for 'crashpoint zero'.

Page 108/126 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115 | Next Page >

- by James

- by Mike

- by yurko

- by Casey Jordan

- by Richard

- by JustJeff

- by Caspar

- by danishgoel

- by Jeff Fohl

- by user331947

- by user32509

- by pablomedok

- by Ole Tange

- by WickedW

- by Adam Tuttle

- by a432511

- by Damodhar

- by Jason Fitzpatrick

- by Pinal Dave

- by Bill Graziano

- by Pinal Dave

- by Robert May

- by Pinal Dave

- by MightyZot

- by pinaldave

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115 | Next Page >