Search Results

Search found 27232 results on 1090 pages for 'mind mapping software'.

Page 108/1090 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

  • Western Digital My Book not recognized by WD software

    - by Kari
    A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

    Read the article

  • Software/hardware to build video streaming server?

    - by Sasha Yanovets
    I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

    Read the article

  • Quickly set up a Windows Server and automatically install and configure software

    - by Chris
    Yesterday I spent far too much time downloading and installing software on Windows Server 2008. I only had to install a simple server for SQL Server 2008 Express using Microsoft's Web Platform Installer, then configure it to enable remote connections. Everything had to be attended, wasting my time. On a Linux system, this would be trivial to automate, but this is Windows. I do this very rarely, but in the future I would like to make this take as little time as possible. I could do a disc image with everything I installed and configured, but is there a better way? I know nothing of advanced deployment techniques on Windows. Ideally I would like to be able to remotely re-install the OS, or have an unattended install (which I know is possible). Any tips to make the software I need easier to and install and configure with minimal interaction necessary would be helpful. I don't expect everything I asked for to be possible and easy to do. Basically, If any part of it can be done quicker or at least without user input, that's what I'm looking for.

    Read the article

  • Reliable backup software for windows network/samba shares.

    - by Eli
    Hi All, I have a Win2003 server that works as a pdc for a number of XP boxes, and a couple related FreeBSD boxes. I need to back up roaming profiles, non-roaming profiles via network shares, local hard drive data, and files on the FreeBSD boxes via samba shares. I have tried Genie Backup Manager and Backup4All pro, and both have excellent features, but both also begin to fail disastrously with more than a few days use. Mostly, the errors seem to have been from the backup catalog getting out of synch with itself. Whatever it is, there is no excuse for a backup software that says it backed up files when it really didn't, or the log saying it backed up exactly the same file 10,000 times in a single run, or flat-out crashing, or any of the other myriad problems I've run into with these. Really sad for products that fill such an important need. Anyway, does anyone know of a backup software that works reliably and can do the following? Scheduled backups for multiple jobs, without a user logged in. Backup from local hard drives or network shares. Incremental backups. Thanks! Edit: Selected solution: I've added my (hopefully final) solution as an answer.

    Read the article

  • Software/hardware to build video streaming server?

    - by Sasha Yanovets
    I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

    Read the article

  • Western Digital My Book not recognized by WD software

    - by Kari
    A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

    Read the article

  • Software for RAID Failure Alerts?

    - by QF_Developer
    I have two 256 GB Samsung 840 Pro SSD disks in a RAID 1 array. I would like to receive a notification if one of the disks in the array fails. Can anybody recommend an application I can install on the server to fire an email if such an event occurs? Here are some additional specs: Supermicro X9SCM-IIF motherboard utilising the hardware RAID controller. OS = Windows 2012 Standard Also is it possible to simulate a disk failure by pulling it out of the bay? SSDs appear to fail close together when in a mirrored config so I'd like to know ASAP if one goes down so I can swap them out with minimum delay. UPDATE 26th June 2013 ------------------------ None of the software that ships with the Supermicro X9SCM-* motherboards offer support for RAID monitoring. As has been pointed out here, these boards are built on an Intel chipset for RAID and so I installed Intel Rapid Storage Technology that supports automated email notifications on RAID failure http://www.intel.com/support/chipsets/imsm/sb/cs-020784.htm One small issue, the software only allows you to send email notifications without SMTP authentication. There's a bunch of different workarounds here: http://communities.intel.com/thread/30771

    Read the article

  • Fake demostration software for command line

    - by Joe
    I'm looking for some software that would be useful for giving demonstrations. I regularly have to show the effects of scrips ect to classes while talking about their effects, and equaly regularly I have finger trouble and have to rewrite various commands - wasting class time and general energy. I'd like to be able to record a sequence of commands in advance, and then play them back at the speed of my choosing. So I might have a file that containes the commands: echo "hello world!" ls ls -l ls -l | sort I'd like to be able to play these commands back by typing similar ones in. So I'd have a blinking command prompt and if I typed 'echo "hxxx' the command prompt would read home$echo "hell and if I typed any other letters the terminal would fill up with the remainder of the command until I press enter, when it executes the command. The point is that even if I screw up the command when typing it, the command that I'd prepared in advance would be executed. My question is - does similar software exist for giving demonstrations? or even, is this an easy thing to script up...? EDIT - two quick things first of all I'm on osx - but it would be nice to get a general solution for other people who arrive here from google. and second a lot of the comments/answers are concentrating on, in effect, making it fast and easy to enter long commands by means of hotkeys and the like. Actually I'd like it to at least look like I'm typing live - that's why I put in the bit about the one-to-one keymapping, but I don't think I explained that quite as well as I could have...

    Read the article

  • Software disables itself when the PC is accessed via RDP

    - by blckgrffn
    We have a large, specialty printer that has vendor specific software that enables its use outside of it showing up simply as a printer in the Windows Control Panel. This software recognizes when we RDP into the machine and "disconnects" the PC from the printer within its proprietary control panel. All is well when an application like TeamViewer is used to access the machine. Ostensibly, the application is helping us be safe by "enforcing" that the machine used for the printer is a walk up workstation, or so the support folks informed me. If TeamViewer etc, fixes the issue, then what is the problem? We have many headless workstations in our warehouse attached to a variety of specialty machines, all used via RDP. We want/need to keep access to the machines the same for the sanity of our production staff. The meat of the question - how, specifically, might a machine know that it is being accessed via RDP (terminal services management???) and how might this be defeated without altering an application or driver. Of note, the system being used is a Windows 7 Pro machine hooked to the printer via USB. Thanks! Nat edit Is there any combination of /admin switches, etc. that will possibly fix this? Simply putting /admin did not.

    Read the article

  • Microsoft Sql Server driver for Nodejs - Part 2

    - by chanderdhall
    Nodejs, Sql server and Json response with Rest This post is part 2 of Microsoft Sql Server driver for Node js.In this post we will look at the JSON responses from the Microsoft Sql Server driver for Node js. Pre-requisites: If you have read the Part 1 of the series, you should be good. We will be using a framework for Rest within Nodejs - Restify, but that would need no prior learning. Restify: Restify is a simple node module for building RESTful services. It is slimmer than Express. Express is a complete module that has all what you need to create a full-blown browser app. However, Restify does not have additional overhead of templating, rendering etc that would be needed if your app has views. So, as the name suggests it's an awesome framework for building RESTful services and is very light-weight. Set up - You can continue with the same directory or project structure we had in the previous post, or can start a new one. Install restify using npm and you are good to go. npm install restify Go to Server.js and include Restify in your solution. Then create the server object using restify.CreateServer() - SLICK - ha? var restify = require('restify'); var server = restify.createServer(); server.listen(8080, function () { console.log('%s listening at %s', server.name, server.url); }); Then make sure you provide a port for the Server to listen at. The call back function is optional but helps you for debugging purposes. Once you are done, save the file and then go to the command prompt and hit 'node server.js' and you should see the following:   To test the server, go to your browser and type the address 'http://localhost:8080/' and oops you will see an error.   Why is that? - Well because we haven't defined any routes. Let's go ahead and create a route. To begin with I'd like to return whatever is typed in the url after my name and the following code should do it. server.get('/ChanderDhall/:status', function respond(req, res, next) { res.end("hello " + req.params.name + "") }); You can also avoid writing call backs inline. Something like this. function respond(req, res, next) { res.end("Chander Dhall " + req.params.name + ""); } server.get('/hello/:name', respond); Now if you go ahead and type http://localhost:8080/ChanderDhall/LovesNode you will get the response 'Chander Dhall loves node'. NOTE: Make sure your url has the right case as it's case-sensitive. You could have also typed it in as 'server.get('/chanderdhall/:name', respond);' Stored procedure: We've talked a lot about Restify now, but keep in mind the post is about being able to use Sql server with Node and return JSON. To see this in action, let's go ahead and create another route to a list of Employees from a stored procedure. server.get('/Employees', Employees); The following code will return a JSON response.  function Employees(req, res, next) { res.header("Content-Type: application/json"); //Need to specify the Content-Type which is //JSON in our case. sql.open(conn_str, function (err, conn) { if (err) { //Logs an error console.log("Error opening the database connection!"); return; } console.log("before query!"); conn.queryRaw("exec sp_GetEmployees", function (err, results) { if (err) { //Connection is open but an error occurs whileWhat else can be done? May be create a formatter or may be even come up with a hypermedia type but that may upset some pragmatists. Well, that's going to be a totally different discussion and is really not part of this series. Summary: We've discussed how to execute a stored procedure using Microsoft Sql Server driver for Node. Also, we have discussed how to format and send out a clean JSON to the app calling this API.  

    Read the article

  • .NET development on a Retina MacBook Pro with Windows 8

    - by Jeff
    I remember sitting in Building 5 at Microsoft with some of my coworkers, when one of them came in with a shiny new 11” MacBook Air. It was nearly two years ago, and we found it pretty odd that the OEM’s building Windows machines sucked at industrial design in a way that defied logic. While Dell and HP were in a race to the bottom building commodity crap, Apple was staying out of the low-end market completely, and focusing on better design. In the process, they managed to build machines people actually wanted, and maintain an insanely high margin in the process. I stopped buying the commodity crap and custom builds in 2006, when Apple went Intel. As a .NET guy, I was still in it for Microsoft’s stack of development tools, which I found awesome, but had back to back crappy laptops from HP and Dell. After that original 15” MacBook Pro, I also had a Mac Pro tower (that I sold after three years for $1,500!), a 27” iMac, and my favorite, a 17” MacBook Pro (the unibody style) with an SSD added from OWC. The 17” was a little much to carry around because it was heavy, but it sure was nice getting as much as eight hours of battery life, and the screen was amazing. When the rumors started about a 15” model with a “retina” screen inspired by the Air, I made up my mind I wanted one, and ordered it the day it came out. I sold my 17”, after three years, for $750 to a friend who is really enjoying it. I got the base model with the upgrade to 16 gigs of RAM. It feels solid for being so thin, and if you’ve used the third generation iPad or the newer iPhone, you’ll be just as thrilled with the screen resolution. I’m typically getting just over six hours of battery life while running a VM, but Parallels 8 allegedly makes some power improvements, so we’ll see what happens. (It was just released today.) The nice thing about VM’s are that you can run more than one at a time. Primarily I run the Windows 8 VM with four cores (the laptop is quad-core, but has 8 logical cores due to hyperthreading or whatever Intel calls it) and 8 gigs of RAM. I also have a Windows Server 2008 R2 VM I spin up when I need to test stuff in a “real” server environment, and I give it two cores and 4 gigs of RAM. The Windows 8 VM spins up in about 8 seconds. Visual Studio 2012 takes a few more seconds, but count part of that as the “ReSharper tax” as it does its startup magic. The real beauty, the thing I looked most forward to, is that beautifully crisp C# text. Consolas has never looked as good as it does at 10pt. as it does on this display. You know how it looks great at 80pt. when conference speakers demo stuff on a projector? Think that sharpness, only tiny. It’s just gorgeous. Beyond that, everything is just so responsive and fast. Builds of large projects happen in seconds, hundreds of unit tests run in seconds… you just don’t spend a lot of time waiting for stuff. It’s kind of painful to go back to my 27” iMac (which would be better if I put an SSD in it before its third birthday). Are there negatives? A few minor issues, yes. As is the case with OS X, not everything scales right. You’ll see some weirdness at times with splash screens and icons and such. Chrome’s text rendering (in Windows) is apparently not aware of how to deal with higher DPI’s, so text is fuzzy (the OS X version is super sharp, however). You’ll also have to do some fiddling with keyboard settings to use the Windows 8 keyboard shortcuts. Overall, it’s as close to a no-compromise development experience as I’ve ever had. I’m not even going to bother with Boot Camp because the VM route already exceeds my expectations. You definitely get what you pay for. If this one also lasts three years and I can turn around and sell it, it’s worth it for something I use every day.

    Read the article

  • Java update/install via group policy

    - by Maximus
    I trying to deploy the latest Java RE version via GP, Java 7 update 9. I want to update computers that are currently running an older version of Java, a mixture of 7.6 and 7.7, some computers are running versions as old as 6.31. Some are running a mixture of both. I would also like this GP to install Java if it's not installed. Previously I used push out Java updates to users machines as Java didn't remove the old version. So when it was done the user would restart their browser or pc to start using the latest version. Not the best way to manage it as it leaves the old version installed but it worked. I've created group policies before for printer deployment, log on drive mapping scripts, but never software deployment. I've extracted the Java MSI and created a transform file to suppress reboot etc using orca. As described on this site http://ivan.dretvic.com/2011/06/how-to-package-and-deploy-java-jre-1-6-0_26-via-group-policy/. I have also tried saving the edited MSI directly and that didn't work either. But it just won't deploy. I have tried to enable logging as suggested on this site http://openofficetechnology.com/node/32, GPO logging via UserEnvDebugLevel, Software deployment logging via AppmgmtDebugLevel and MSI logging, but there is no log C:\Windows\Debug\UserMode\userenv.log being created. The windows event viewer has the following errors: Error 24/10/2012 11:44:04 AM - "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was : %%1612" Information 24/10/2012 11:44:04 AM - "The removal of the assignment of application Java 7 Update 9 - FB Java Transform from policy JavaDeploy succeeded." Error 24/10/2012 11:44:04 AM - "The install of application Java 7 Update 9 - FB Java Transform from policy JavaDeploy failed. The error was : %%1612" There is a log created for MSI logging and it's as below. It says the source is invalid but it exists on the share and the PC that I'm testing has permissions and I've included the recommendation here Group Policy installation failed error 1274 to enable "Always wait for the network at computer startup and logon" === Verbose logging started: 24/10/2012 11:43:59 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\Windows\system32\svchost.exe === MSI (c) (9C:EC) [11:43:59:898]: Resetting cached policy values MSI (c) (9C:EC) [11:43:59:898]: Machine policy value 'Debug' is 3 MSI (c) (9C:EC) [11:43:59:898]: ******* RunEngine: ******* Product: {26a24ae4-039d-4ca4-87b4-2f83217009ff} ******* Action: ******* CommandLine: ********** MSI (c) (9C:EC) [11:43:59:898]: Client-side and UI is none or basic: Running entire install on the server. MSI (c) (9C:EC) [11:43:59:898]: Grabbed execution mutex. MSI (c) (9C:EC) [11:44:03:431]: Cloaking enabled. MSI (c) (9C:EC) [11:44:03:431]: Attempting to enable all disabled privileges before calling Install on Server MSI (c) (9C:EC) [11:44:03:439]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (2C:70) [11:44:03:574]: Running installation inside multi-package transaction {26a24ae4-039d-4ca4-87b4-2f83217009ff} MSI (s) (2C:70) [11:44:03:574]: Grabbed execution mutex. MSI (s) (2C:7C) [11:44:03:607]: Resetting cached policy values MSI (s) (2C:7C) [11:44:03:607]: Machine policy value 'Debug' is 3 MSI (s) (2C:7C) [11:44:03:607]: ******* RunEngine: ******* Product: {26a24ae4-039d-4ca4-87b4-2f83217009ff} ******* Action: ******* CommandLine: ********** MSI (s) (2C:7C) [11:44:03:607]: Machine policy value 'DisableUserInstalls' is 0 MSI (s) (2C:7C) [11:44:03:623]: User policy value 'SearchOrder' is 'nmu' MSI (s) (2C:7C) [11:44:03:624]: User policy value 'DisableMedia' is 0 MSI (s) (2C:7C) [11:44:03:624]: Machine policy value 'AllowLockdownMedia' is 0 MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Media enabled only if package is safe. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Looking for sourcelist for product {26a24ae4-039d-4ca4-87b4-2f83217009ff} MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Adding {26a24ae4-039d-4ca4-87b4-2f83217009ff}; to potential sourcelist list (pcode;disk;relpath). MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Now checking product {26a24ae4-039d-4ca4-87b4-2f83217009ff} MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Media is enabled for product. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Attempting to use LastUsedSource from source list. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Processing net source list. MSI (s) (2C:7C) [11:44:03:624]: SOURCEMGMT: Trying source \\server\share\deployment\Java\stable\x32\. MSI (s) (2C:7C) [11:44:03:650]: Note: 1: 2303 2: 5 3: \\server\share\ MSI (s) (2C:7C) [11:44:03:650]: Note: 1: 1325 2: deployment MSI (s) (2C:7C) [11:44:03:650]: ConnectToSource: CreatePath/CreateFilePath failed with: -2147483648 1325 -2147483648 MSI (s) (2C:7C) [11:44:03:650]: ConnectToSource (con't): CreatePath/CreateFilePath failed with: -2147483648 -2147483648 MSI (s) (2C:7C) [11:44:03:650]: SOURCEMGMT: net source '\\server\share\deployment\Java\stable\x32\' is invalid. MSI (s) (2C:7C) [11:44:03:650]: Note: 1: 1706 2: -2147483647 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:03:650]: SOURCEMGMT: Processing media source list. MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 2203 2: 3: -2147287037 MSI (s) (2C:7C) [11:44:04:668]: SOURCEMGMT: Source is invalid due to missing/inaccessible package. MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1706 2: -2147483647 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:04:668]: SOURCEMGMT: Processing URL source list. MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1402 2: UNKNOWN\URL 3: 2 MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1706 2: -2147483647 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:04:668]: Note: 1: 1706 2: 3: jre1.7.0_09.msi MSI (s) (2C:7C) [11:44:04:668]: SOURCEMGMT: Failed to resolve source MSI (s) (2C:7C) [11:44:04:668]: MainEngineThread is returning 1612 MSI (s) (2C:70) [11:44:04:670]: User policy value 'DisableRollback' is 0 MSI (s) (2C:70) [11:44:04:670]: Machine policy value 'DisableRollback' is 0 MSI (s) (2C:70) [11:44:04:670]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (2C:70) [11:44:04:670]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 MSI (s) (2C:70) [11:44:04:671]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 MSI (s) (2C:70) [11:44:04:671]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 MSI (s) (2C:70) [11:44:04:671]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2 MSI (s) (2C:70) [11:44:04:671]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (s) (2C:70) [11:44:04:671]: Restoring environment variables MSI (c) (9C:EC) [11:44:04:675]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (9C:EC) [11:44:04:675]: MainEngineThread is returning 1612 === Verbose logging stopped: 24/10/2012 11:44:04 === I'm not sure what my next approach should be. Any help would be much appreciated. Thanks.

    Read the article

  • How does Fluent NHibernate support the Import Entity

    - by Bender
    I want to create a strongly type object from a fluent NHibernate query. If I were using HQL and NHibernate I belive I would need: the class for the output Namespace Model Public Class namecount Public Overridable Property lastname() as string ... Public Overridable Property lastnamecount() as integer ... Public Sub New(lastname as string, count as integer) ... End Class End Namespace an .hbm.xml file <?xml ...> <hibernate-mapping ...> <import class="model.namecount,model"> </hibernate-mapping> and of course the query _session.createquery("select new namecount(lastname, count(lastname)) ...") (The above is a paraphrased example taken from one of the 2008 SummerofNHibernate videos) I cannot find any examples of how to do this with fluent (even in C#), is it possible? If it isn't is there a VB example of how to mix Fluent and .hbm.xml

    Read the article

  • Complex relationship between tables in NHibernate

    - by Ilya Kogan
    Hi all, I'm writing a Fluent NHibernate mapping for a legacy Oracle database. The challenge is that the tables have composite primary keys. If I were at total freedom, I would redesign the relationships and auto-generate primary keys, but other applications must write to the same database and read from it, so I cannot do it. These are the two tables I'll focus on: Example data Trips table: 1, 10:00, 11:00 ... 1, 12:00, 15:00 ... 1, 16:00, 19:00 ... 2, 12:00, 13:00 ... 3, 9:00, 18:00 ... Faults table: 1, 13:00 ... 1, 23:00 ... 2, 12:30 ... In this case, vehicle 1 made three trips and has two faults. The first fault happened during the second trip, and the second fault happened while the vehicle was resting. Vehicle 2 had one trip, during which a fault happened. Constraints Trips of the same vehicle never overlap. So the tables have an optional one-to-many relationship, because every fault either happens during a trip or it doesn't. If I wanted to join them in SQL, I would write: select ... from Faults left outer join Trips on Faults.VehicleId = Trips.VehicleId and Faults.FaultTime between Trips.TripStartTime and Trips.TripEndTime and then I'd get a dataset where every fault appears exactly once (one-to-many as I said). Note that there is no Vehicles table, and I don't need one. But I did create a view that contains all VehicleIds from both tables, so I can use it as a junction table. What am I actually looking for? The tables are huge because they cover years of data, and every time I only need to fetch a range of a few hours. So I need a mapping and a criteria that will run something like the following SQL underneath: select ... from Faults left outer join Trips on Faults.VehicleId = Trips.VehicleId and Faults.FaultTime between Trips.TripStartTime and Trips.TripEndTime where Faults.FaultTime between :p0 and :p1 Do you have any ideas how to achieve it? Note 1: Currently the application shouldn't write to the database, so persistence is not a must, although if the mapping supports persistence, it may help at some point in the future. Note 2: I know it's a tough one, so if you give me a great answer, you will be properly rewarded :) Thank you for reading this long question, and now I only hope for the best :)

    Read the article

  • How To Make NHibernate Automatically change an "Updated" column

    - by IanT8
    I am applying NHibernate to an existing project, where tables and columns are already defined and fixed. The database is MS-SQL-2008. NHibernate 2.1.2 Many tables have a column of type timestamp named "ReplicationID", and also a column of type datetime named "UpdatedDT". I understand I might be able to use the element of the mapping file to describe the "ReplicationID" column which will allow NHibernate to manage that column. Is it possible to make NHibernate automatically update the UpdatedDT column when the row is updated? I suppose I could try mapping the UpdatedDT property to be of type timestamp, but that have other side effects.

    Read the article

  • Hibernate can't load Custom SQL collection

    - by Geln Yang
    Hi, There is a table Item like, code,name 01,parent1 02,parent2 0101,child11 0102,child12 0201,child21 0202,child22 Create a java object and hbm xml to map the table.The Item.parent is a Item whose code is equal to the first two characters of its code : class Item{ String code; String name; Item parent; List<Item> children; .... setter/getter.... } <hibernate-mapping> <class name="Item" table="Item"> <id name="code" length="4" type="string"> <generator class="assigned" /> </id> <property name="name" column="name" length="50" not-null="true" /> <many-to-one name="parent" class="Item" not-found="ignore"> <formula> <![CDATA[ (select i.code,r.name from Item i where (case length(code) when 4 then i.code=SUBSTRING(code,1,2) else false end)) ]]> </formula> </many-to-one> <bag name="children"></bag> </class> </hibernate-mapping> I try to use formula to define the many-to-one relationship,but it doesn't work!Is there something wrong?Or is there other method? Thanks! ps,I use mysql database. add 2010/05/23 Pascal's answer is right,but the "false" value must be replaced with other expression,like "1=2".Because the "false" value would be considered to be a column of the table. select i.code from Item i where ( case length(code) when 4 then i.code=SUBSTRING(code,1,2) else 1=2 end) And I have another question about the children "bag" mapping.There isn't formula configuration option for "bag",but we can use "loader" to load a sql-query.I configure the "bag" as following.But it get a list whose size is 0.What's wrong with it? <class> ... ... <bag name="children"> <key /> <one-to-many class="Item"></one-to-many> <loader query-ref="getChildren"></loader> </bag> </class> <sql-query name="getChildren"> <load-collection alias="r" role="Item.children" /> <![CDATA[(select {r.*} from Item r join Item o where o.code=:code and ( case length(o.code) when 2 then (length(r.code)=4 and SUBSTRING(r.code,1,2)=o.code) else 1=2 end ))]]> </sql-query>

    Read the article

  • Nhibernate ValueType Collection as delimited string in DB

    - by JWendel
    Hi I have a legacy db that I am mapping with Nhibernate. And in several locations a list och strigs or domain objects are mapped as a delimited string in the database. Either 'string|string|string' in the value type cases and like 'domainID|domainID|domainID' in the references type cases. I know I can create a dummy property on the class and map to that fields but I would like to do it in a more clean way, like when mapping Enums as their string representation with the EnumStringType class. Is a IUserType the way to go here? Thanks in advance /Johan

    Read the article

  • [N]Hibernate: view-like fetching properties of associated class

    - by chiccodoro
    (Felt quite helpless in formulating an appropriate title...) In my C# app I display a list of "A" objects, along with some properties of their associated "B" objects and properties of B's associated "C" objects: A.Name B.Name B.SomeValue C.Name Foo Bar 123 HelloWorld Bar Hello 432 World ... To clarify: A has an FK to B, B has an FK to C. (Such as, e.g. BankAccount - Person - Company). I have tried two approaches to load these properties from the database (using NHibernate): A fast approach and a clean approach. My eventual question is how to do a fast & clean approach. Fast approach: Define a view in the database which joins A, B, C and provides all these fields. In the A class, define properties "BName", "BSomeValue", "CName" Define a hibernate mapping between A and the View, whereas the needed B and C properties are mapped with update="false" insert="false" and do actually stem from B and C tables, but Hibernate is not aware of that since it uses the view. This way, the listing only loads one object per "A" record, which is quite fast. If the code tries to access the actual associated property, "A.B", I issue another HQL query to get B, set the property and update the faked BName and BSomeValue properties as well. Clean approach: There is no view. Class A is mapped to table A, B to B, C to C. When loading the list of A, I do a double left-join-fetch to get B and C as well: from A a left join fetch a.B left join fetch a.B.C B.Name, B.SomeValue and C.Name are accessed through the eagerly loaded associations. The disadvantage of this approach is that it gets slower and takes more memory, since it needs to created and map 3 objects per "A" record: An A, B, and C object each. Fast and clean approach: I feel somehow uncomfortable using a database view that hides a join and treat that in NHibernate as if it was a table. So I would like to do something like: Have no views in the database. Declare properties "BName", "BSomeValue", "CName" in class "A". Define the mapping for A such that NHibernate fetches A and these properties together using a join SQL query as a database view would do. The mapping should still allow for defining lazy many-to-one associations for getting A.B.C My questions: Is this possible? Is it [un]artful? Is there a better way?

    Read the article

  • C# Domain-Driven Design Sample Released

    - by Artur Trosin
    In the post I want to declare that NDDD Sample application(s) is released and share the work with you. You can access it here: http://code.google.com/p/ndddsample. NDDDSample from functionality perspective matches DDDSample 1.1.0 which is based Java and on joint effort by Eric Evans' company Domain Language and the Swedish software consulting company Citerus. But because NDDDSample is based on .NET technologies those two implementations could not be matched directly. However concepts, practices, values, patterns, especially DDD, are cross-language and cross-platform :). Implementation of .NET version of the application was an interesting journey because now as .NET developer I better understand the differences positive and negative between these two platforms. Even there are those differences they can be overtaken, in many cases it was not so hard to match a java libs\framework with .NET during the implementation. Here is a list of technology stack: 1. .net 3.5 - framework 2. VS.NET 2008 - IDE 3. ASP.NET MVC2.0 - for administration and tracking UI 4. WCF - communication mechanism 5. NHibernate - ORM 6. Rhino Commons - Nhibernate session management, base classes for in memory unit tests 7. SqlLite - database 8. Windsor - inversion of control container 9. Windsor WCF facility - for better integration with NHibernate 10. MvcContrib - and in particular its Castle WindsorControllerFactory in order to enable IoC for controllers 11. WPF - for incident logging application 12. Moq - mocking lib used for unit tests 13. NUnit - unit testing framework 14. Log4net - logging framework 15. Cloud based on Azure SDK These are not the latest technologies, tools and libs for the moment but if there are someone thinks that it would be useful to migrate the sample to latest current technologies and versions please comment. Cloud version of the application is based on Azure emulated environment provided by the SDK, so it hasn't been tested on ‘real' Azure scenario (we just do not have access to it). Thanks to participants, Eugen Gorgan who was involved directly in development, Ruslan Rusu and Victor Lungu spend their free time to discuss .NET specific decisions, Eugen Navitaniuc helped with Java related questions. Also, big thank to Cornel Cretu, he designed a nice logo and helped with some browser incompatibility issues. Any review and feedback are welcome! Thank you, Artur Trosin

    Read the article

  • How to fix the "Setting locale failed" error while installing vim?

    - by user211775
    When installing vim through Software Center , I get this error installArchives() failed: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = "en_IN.ISO8859-1" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Setting up install-info (4.13a.dfsg.1-10ubuntu4) ... /etc/environment: line 1: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games: No such file or directory dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: install-info Setting up install-info (4.13a.dfsg.1-10ubuntu4) ... /etc/environment: line 1: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games: No such file or directory dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 1

    Read the article

  • GNU/Linux interactive table content GUI editor?

    - by sdaau
    I often find myself in the need to gather data (say from the internet), into a table, for comparison reasons. I usually need the final table output in HTML or MediaWiki mostly, but often times also Latex. My biggest problem is that I often forget the correct table syntax for these markup languages, as well as what needs to be properly escaped in the inline data, for the table to render correctly. So, I often wish there was a GUI application, which provides a tabular framework - which I could stick "Always on Top" as a desktop window, and I could paste content into specific cells - before finally exporting the table as a code in the correct language. One application that partially allows this is Open/LibreOffice calc: The good thing here is that: I can drag and drop browser content into a specifically targeted table cell (here B2) "Rich" text / HTML code gets pasted For long content, the cell (column) width stays put as it originally was The bad thing is, that: when the cell height (due to content size) becomes larger than the calc window, it becomes nearly impossible to scroll calc contents up and down (at least with the mousewheel), as the view gets reset to top-right corner of the selected cell calc shows an "endless"/unlimited field of cells, so not exactly a "table" - which I find visually very confusing (and cognitively taxing) Can only export table to HTML What I would need is an application that: Allows for a limited size table, but with quick adding of rows and columns (e.g. via corresponding + buttons) Allows for quick setup of row and column height and width (as well as table size) Stays put at those sizes, regardless of size of content pasted in; if cell content overflows, cell scrollbars are shown (cell content could be possibly re-edited in a separate/new window); if table overflows over window size, window scrollbars are shown Exports table in multiple formats (I'd need both HTML and mediawiki), properly escaping cell content for each (possibility to strip HTML tags from content pasted in cells, to get plain text, is a plus) Targeting a specific cell in the table for the content paste operation is a must - it doesn't have to be drag'n'drop though, a right click over a cell with "Paste content" is enough. I'd also want the ability to click in a specific cell and type in (plain text) content immediately. So, my question is: is there an application out there that already does something like this? The reason I'm asking is that - as the screenshots show - for instance Libre/OpenOffice allows it, but only somewhat (as using it for that purpose is tedious). I know there exist some GUI editors for Linux (both for UI like guile or HTML like amaya); but I don't know them enough to pinpoint if any of them would offer this kind of functionality (and at least in my searches, that kind of functionality, if present in diverse software, seems not to be advertised). Note I'm not interested in styling an HTML table, which is why I haven't used "table designer" in the title, but "table editor" (in lack of better terms) - I'm interested in (quickly) adjusting row/column size of the table, and populating it with pasted data (which is possibly HTML) in a GUI; and finally exporting such a table as self-contained HTML (or other) code.

    Read the article

  • Upgrading 10.04LTS -> 10.10 using custom sources

    - by Boatzart
    I'm trying to upgrade to 10.10 from 10.04 LTS using a custom sources.list file that points to an unofficial mirror*. The mirror does have maverick, but I get the following output when upgrading: boatzart@somecomputer: > sudo do-release-upgrade Checking for a new ubuntu release Done Upgrade tool signature Done Upgrade tool Done downloading extracting 'maverick.tar.gz' authenticate 'maverick.tar.gz' against 'maverick.tar.gz.gpg' tar: Removing leading `/' from member names Reading cache Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Updating repository information WARNING: Failed to read mirror file No valid mirror found While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date. Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'lucid' to 'maverick' entries. If you select 'No' the upgrade will cancel. Continue [yN] y WARNING: Failed to read mirror file 96% [Working] Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Calculating the changes Calculating the changes Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: The package 'update-manager-kde' is marked for removal but it is in the removal blacklist. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report. Restoring original system state Aborting Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Here is the relevant section from /var/log/dist-upgrade/main.log: 2010-11-18 14:05:52,117 DEBUG The package 'update-manager-kde' is marked for removal but it's in the removal blacklist 2010-11-18 14:05:52,136 ERROR Dist-upgrade failed: 'The package 'update-manager-kde' is marked for removal but it is in the removal blacklist.' 2010-11-18 14:05:52,136 DEBUG abort called *I'm located inside of USC, and for some crazy reason any sustained downloads to anywhere outside of the University are throttled down to 5kbps inside of my lab. Because of this I need to use the following sources.list: deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-updates main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-backports main restricted universe multiverse deb http://mirrors.usc.edu/pub/linux/distributions/ubuntu/ lucid-security main restricted universe multiverse I've tried adding four more entries to the sources.list with s/lucid/maverick/ but that didn't help. Does anyone know how to fix this? Thanks!

    Read the article

  • Suggestions for Summer Intern Application Assignments

    - by orangepips
    As part of our application process we want prospective college interns to complete an assignment on their own - either programming or analytical - to give us something tangible to evaluate such as code or a flowchart. I have two ideas for these assignments, one programming and one analytical, I am interested in gathering feedback about these. Programming Assignment Generate an a month's calendar for a given date. The first row should indicate the days of the week (e.g. Sunday - Saturday). Each subsequent row should contain a week's days. The date supplied should be highlighted (e.g. bolded). I am thinking we'll probably proscribe the output format even more strictly - probably down to what the HTML source should look like including CSS classes. Thinking is this forces answerers to actually do some work if they merely copy a solution from the internet. Analytical Assignment Diagram or describe in prose a system for managing a set of traffic lights for traffic at a four way intersection. Each direction (i.e. North, South, East and West) has two lanes (i.e. right and left). The left lane is turn only and has green arrow light to indicate right of way. The system is able to detect if lanes have cars in them and change the lights accordingly. I would expect a flow chart or some prose describing a finite state machine that deals with each contingency. This would hopefully provide some indication of the applicant's ability to reason through a logic problem of sorts and articulate an approach for solving. Areas Seeking Feedback Is it unreasonable to ask this of applicants? If not, is it better to request before or after a phone screen? Are these questions too hard or easy for a collegiate audience? Any suggestions for alternate questions? Do these seem like good tools for analyzing people who would part of a software development life cycle? Programming language suggestions - I'm thinking Java, Python and/or C# (we're actually a ColdFusion shop).

    Read the article

  • What does a Software Developer actually do?

    - by chobo2
    Hi I am graduating from my Computer Science degree in a few weeks from now!! I started to look for my first job. For the last couple years I gotten really into web programming(Asp.net). My first choice would be to get a junior asp.net MVC developer but I don't any companies in my area use MVC yet or if they do they are not hiring. So my second choice would be a junior asp.net Webforms developer. My other choices after that would be forms applications, mobile applications using .Net and C#. As you can see I am looking for something with .Net. I spent the last couple years doing .Net projects for school, on my free time and love the Language and it would pain me right now to switch to something like php. So now I found a posting in my area for an Entry Software Developer. I like the fact that they are using .net and that it is entry job(I never worked in this industry and never had more then like a tutoring job so I want to for like intermediate jobs). Posting Are you looking for an exciting challenge within a dynamic, people-oriented culture where you can launch your technical career? Company Name Inc. is a technology consulting company, located in Canada, that designs, develops, and delivers real-time interactive applications accessed via the Internet as well as back-end tools to support these applications. Company Name provides a combination of out-of-the-box and customized solutions to an expanding list of partners and customers. POSITION SUMMARY As a member of our team, the successful candidate will be responsible for helping us increase the quality and stability of our software systems by working jointly and directly with both the Software Development teams and the QA Team. The primary mission of this role will be to substantially enhance our test automation suite. The incumbent will design and program automated tests (unit, integration, system, stress and load) in Visual Studio using C# and will develop sound processes that help us identify and resolve defects as early as possible. The successful incumbent will help us improve and enhance system functionality, reliability, performance and scalability. This role is specifically designed for an eager, bright, new graduate who is looking for a stepping stone into a software engineering role. We promote from within and invite new graduates to apply for this important position - which may lead to new opportunities. We also offer a generous professional development plan to help you on your way. You will be a key part of a team of experts that is responsible for improving the quality of our software by: • Designing, writing, and executing test plans and programmatic tests in Visual Studio using C# and NUnit for functional testing of our code, new features, regression, and performance test procedures. • Working with the engineers to design and build the stress and load testing framework which emulates tens and even hundreds of thousands of concurrent users via a distributed network interfacing with our Load Testing Lab. • Interfacing with both the Development Team and the QA Team to ensure risks are identified and managed. • Mentoring and leading the QA Team in programmatic test automation technologies and tools. MUST HAVE SKILLS / QUALIFICATIONS: • Diploma or higher Degree in Computer Science, or equivalent formal training. • Fundamental C# programming skills. • Knowledge of Internet technologies and Microsoft Windows platforms. • Knowledge of PC hardware. • Excellent communication skills (both oral and written). • Self-starter who takes initiative, requires minimal supervision, can handle multiple simultaneous tasks. • Detail-oriented, able to concentrate, and work quickly. • Proven diagnostic, analytical, and problem solving skills. NICE TO HAVE SKILLS: • Exposure to Visual Studio Team System or Visual Studio Test Edition. • Exposure in C# using NUnit. • Exposure to NUnit, HTTPUnit, and other automation tool suites. • Exposure to Performance/Stress/Load Testing. • Good understanding of relational databases (MS SQL Server). • Familiar with video and online multi-player games. As part of our team you will have the opportunity to work with a supportive team of experts, drive your own success, and ride the wave as we continually expand our team of experts. If you are interested in this opportunity, please send your resume to [email protected] with “Entry Level Software Developer” in the subject line. So that is the posting. To me it sounds like it is QA job. I don't have anything against QA jobs but alot of them seems to be your just clicking buttons and running scripts. Is this what a typical software developer does? Like I am so on the fence to apply for this job. On one side I am not sure how much programming I would be doing. Like I want to be at least half the time programming otherwise my skills will never improve since I will never be programming in teams and stuff. At the same time I have no experience in the industry so on the other side I am thinking just go for it and then maybe a year later try to get a full programming job(provided that I got the job). Yet if I am not programming in that job then that experience will not help me for the next job I find as I will be back a square one.

    Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >