Search Results

Search found 10215 results on 409 pages for 'ram usage'.

Page 108/409 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• Choosing A Power Supply [closed]

  - by Geeks On Hugs

  Possible Duplicate: Power Supply Capacity Formula How can I check if my system needs more PSU power? I'm not sure if it's OK or not to ask a hardware question here. If not please let me know a good place but I've always got good info here so I thought I'd give it a shot. I'm custom building a new workstation for coding (Linux/Eclipse). How do I determine how much power the power supply needs? I'm building a mini ITX system on a budget and so I need to get as small as possible that is sufficient. I'll have a mini itx mobo with on board wifi and bluetooth, 8 GB RAM, an Intel i3 3.1 Ghz processor, 64 GB SSD and a slim optical drive. In the future I might add a descrete GPU, 16 GB RAM, 128 GB SSD. What is the minimum power I need and how do I calculate that?

  Read the article

• ASUS K55VM Laptop unexpectedly shuts down

  - by Abhishek Sha

  I've read quite a few questions on SuperUser of people having laptop shutdown problems but mine is different. My laptop specs: Intel Core i7 3610QM (IvyBridge) NVIDIA GT630M 2GB and Intel GMA4000 8GB RAM Windows 7 64 Bit My laptop occasionally shuts down when playing FarCry 3. It's around 5 months old. I've played games like Crysis and it never shuts down unexpectedly. Since I experienced this shut down recently, I decided for GPU-Z to log the temperatures. The final log value at the time of shutdown were thus: GPU Core Clock [MHz] - 797.3 GPU Memory Clock [MHz] - 896.8 GPU Temperature [°C] - 89.0 GPU Load [%] - 99 Memory Controller Load [%] - 36 Video Engine Load [%] - 0 Memory Usage (Dedicated) [MB] - 535 Memory Usage (Dynamic) [MB] - 53 VDDC [V] - 1.0620 My drivers are up-to-date and I didn't encounter any BSODs at the time of shut down. It simply turns off.

  Read the article

• squid transparent proxy on all ports

  - by Yves Richard

  I have setup squid as a transparent proxy by redirecting port 80 to the native squid port 3128. I know there are issues with getting secure ports like ssl and imaps to go though the proxy but can I redirect all other ports through the proxy as well. I am trying to get a better idea of bandwidth usage. I have setup iptables to log usage and i am getting most traffic going into the related/established rule. I am trying to determine the origins of this traffic by sending traffic to squid for more detailed logging.

  Read the article

• How to scale out OpenStreetMap data efficiently

  - by Pierre

  For over a year now, I'm running an in-house PostGIS server filled with OSM data, used for both Mapnik-based tile generation and Nominatim-based geocoding, updated with day replicates. This works pretty well. However, as usage is growing exponentially, I would like to achieve better reliability and performance by adding additional PostgreSQL servers. And I'm kind of lost. Since PostgreSQL doesn't seem to handle replication by itself, I would think about using a piede of middleware like PgPool-II to keep the servers in sync. But I'm afraid it would be nothing but necessary for this usage : very high read-to-write ratio, where all writes are done at the same exact time every day. My questions are simple : What would you do to keep these servers in sync? And, what is done for this at the OpenStreetMap Foundation, MapQuest, Mapbox or CloudMade? Thanks.

  Read the article

• Rail's FileStore with Linux Disk Caching or RAMdisk?

  - by Yo Ludke

  I have a Ruby on Rails application that stores it's catched files on the filesystem (Rails file-system cache). I was thinking about changing to memcached Store, but a short test shows it isn't a big difference in speed. From linuxatemyram.com I learned a bit about file caching. On the current machine there would be around 40..45GB RAM left which isn't needed for the application and which can be used to linux-disk-cache this rails file cache store. The disk is a RAID10 system with almost 120MB disk perfomance. How can I tell Linux to use free RAM more deliberately and not to be shy about using it? Do think it's necessary to adjust a sysyctl/.. value here, or would I have performance advantages to put the File Store root diretory on a ramdisk? (Loosing the cache during a reboot wouldn't be a problem)

  Read the article

• What affects video encoding speeds?

  - by Pig Head

  FRAPs doesn't compress its videos when you record, so the files are enormous. In a long recording you can get up to a few hundred gigabytes. Obviously, usually you would need to convert/compress them. What affects the speed of this? I don't think the RAM does, as when I converted 600 gb my RAM usage only went to 6 gig, but the processor was at 100%, which is surprising as I have a 6 core processor @ 3.46 ghz. Would clock speed or cores help the most?

  Read the article

• How to get - number of threads per process?

  - by user42159

  This is one Ubuntu 9.10 server. Also how to see memory usage per process? Thanks

  Read the article

• Supermicro MBD-X9DRL-IF-B and 8 X Hynix 4Gb DDR3 ECC dont boot

  - by Avi Keinan

  I have a custom build server with 2 Xeon E5-2609 and Supermicro MBD-X9DRL-IF-B. Right now the server has 4X Hynix 4Gb 2Rx8 PC3L-10600R-9-10-B0 HMT351R7BFR8A. and its working great. We baught another 4 from the same series of memory, when we installed all the ram (4 sticks already installed and we added 4 new sticks) the server didn't boot. When we replaced the current memory with the new memory - the server did boot. Right now we are in a problem because we need to extend this server ram but the motherboard don't run with 8X4Gb. Any ideas why? I have attached a picture with one of the current memory stick and one of the new memory stick. Thanks in advence.

  Read the article

• PC is very slow

  - by Appoos

  Hi All, My Windows XP system is very slow. I tried all possible ways of improving the performance. But now luck. I've 4GB RAM and AMD Phenon XII B53 processor. I don't see any applications consuming CPU resources. But the Page File usage is 4.18 GB(System Managed size in MyComputerPropertiesPeformance). There is enough RAM available, but still why OS is using Page File? How can I improve the Page File usage? Please help me.

  Read the article

• Do virtual machines perform better on the host HDD or USB drive?

  - by Jeremy Ricketts

  The question I'm asking is kind of general, and I'll give more specifics about my specific setup. Here's the main question though: Do virtual machines generally perform better on the host HDD or is it better to operate them from an external disk? My specific setup: A Macbook Pro with a nearly full internal SATA drive that spins at 7200. On this system I'm running large programs like Photoshop and some other RAM-intense applications. I've dedicated 2 of my 8 gigs of RAM to my VMware Fusion virtual machine, which runs Windows 7 and Visual Studio, sits on the same drive. When that thing boots up, my system really starts crawling. I have an external USB (specifics of that drive are here) which I'm thinking about moving the VM to. Obviously a USB drive is slower than my internal HDD, but maybe having two operating systems using the same disk is WORSE than putting one of them on a separate (albiet slower) disk. This a bad idea?

  Read the article

• How to make a vm scale when demand for resource increases

  - by Cray XT3

  i am having a server with 16 virtual core and 24G RAM,using Xen virtualization and ubuntu as dom0 Created 4 VMs (in para mode),each with different applications. CPU Load vary on each vm,somtimes first vm reaches nearly 100% CPU and others under 25% or even less. So is there a way in which vm can get cpu from other vms when they are not actually using it or utilization is under 25%.Same in the case of RAM also. I am not sure whether i am mentioning Cloud here. Initially i would like to give every vm a single VCPU,but can scale up to 8 or more by taking cpu from other vms if they are not using it. Is there any kind of tool that makes vm to scale its resources when demand increases. Is cloudstack and openstack designed for these kind of purpose or is that just a GUI to manage VMs.

  Read the article

• How to disable VGA on new server... reversibly?

  - by Javawag

  Strange question here. I have a server with 1GB of RAM, however when booted this shows as 768MB. I've discovered the reason for it – and that is that it has an unboard graphics card which shares memory with main RAM. Running Ubuntu Server, it doesn't actually ever use anything graphical – it's all set up to be SSH'd into and therefore there's no need to use the VGA. I believe there may be a setting to switch off VGA/graphics card in BIOS, but my question to you guys is: is this recommended? and if I turn it off, then how would I turn it back on again in BIOS (given that with it off, I wouldn't be able to see the option to turn it on as there would be no graphics output!!)?

  Read the article

• Utility to monitor vsftpd.log

  - by Claudiu

  Is there a Linux utility that can monitor vsftpd.log an extract bandwidth usage information for every user ?

  Read the article

• PC shut downs automatically after a second

  - by emzero

  I have this not-so-old computer that's not being used for a year or so. Specs: Motherboard: ASUS PN5-E SLI CPU: Intel Core2Duo E4300 RAM:2x2GB SuperTalent DDR2-800 VGA: Zogis GeForce 7950GT PSU: Vitsuba San-55-S 550w HD: No hardrives yet When I power on the computer, everything seem to start, but right away the whole system shuts down. I've removed and changed the RAM sticks, take out the VGA, everything I could think of. So what could it be causing this? The PSU? The motherboard is dead? The CPU? Any help to isolate the problem will be useful. Thanks PS: Please don't close the question, this could be helpful to anybody having a similar problem, even with different hardware.

  Read the article

• Windows 7 Recurring Blue Screens: MEMORY_MANAGEMENT 0x1A

  - by Chris C.

  I have recurring BSODs that really have me scratching my head. Here's a look at the errors: MEMORY_MANAGEMENT 0x1A (ntoskrnl.exe) - I've seen this 9 times since April 2012 NTFS_FILE_SYSTEM 0x24 (Ntfs.sys) - this one's new, happend 4 days ago BAD_POOL_HEADER 0x19 (win32k.sys) - also new, happened 7 days ago My system specs: Intel Core i5 2500K @ 3.30GHz ASUS Sabertooth P67 Motherboard (Rev 2) * RMA'd my Rev 1 due to recall 16GB (4 x 4GB) Kingston HyperX 1600 MHz DDR3 RAM 2 x 640GB Western Digital Caviar Black 64MB SATA HDD EVGA NVIDIA GeForce GTS450 1GB PCI-E 2.0 Graphics Card I've got Windows 7 Home Premium and it's completely patched. I'm also running Microsoft Security Essentials, which is up-to-date and always present. I've run MemTest86+ from a USB drive for up to nine hours, giving my RAM a total of 6 passes, and it didn't detect a single error. I've used chkdsk in Windows 7 to scan the C:/ drive on boot (twice) and it found no problems. How can I find out what's causing all these blue screens?

  Read the article

• How can I create a consistent snapshot of tmpfs?

  - by netvope

  How can I create a consistent snapshot of tmpfs or any RAM disks?

  Read the article

• Making the most of dual channel DDR2: how do I arrange the sticks?

  - by andrz_001

  I've searched online, but I can't find anything definitive that will put me at ease. I turn to superuser. This is how I have the RAM sticks arranged now: To make the most of the RAM and the dual channel capability, it occurred to me that perhaps I have the sticks arranged incorrectly. Should I move the stick in the DDR2_2 slot one over--to the adjacent, red slot? I appreciate any suggestions. (BTW, can something in BIOS tell me whether I'm running at "optimal" memory speeds??) edit: I'm running Windows XP SP3, 32-bit. Thanks.

  Read the article

• Need Help Debugging BSOD

  - by nmuntz

  For the last few days I've been getting a BSOD at least once a day. Apparently the crash has been caused by ntkrpamp.exe and searching on google has revealed that the issue seems to be related to bad RAM. I have run memtest and my RAM modules have no errors on them. I'm pretty sure the issue is related to drivers, but I can't figure out which one. I'm not an expert in interpreting the output of windbg so any pointers would be greatly appreciated. Here is my analysis with WinDbg. It was too long to paste it here. One strange thing i noticed is that my Windows XP is in Spanish (SP3) and ntkrpamp.exe copyright info seems to be in portuguese. Not sure if that could be an issue, perhaps i have the wrong ntkrpamp.exe... Thanks a lot in advance

  Read the article

• Linux (non-transparent) per-process hugepage accounting

  - by Dan Pritts

  I've recently converted some java apps to run with linux manually-configured hugepages. I've got about 10 tomcats running on a system and I am interested in knowing how much memory each one is using. I can get summary information out of /proc/meminfo as described in Linux Huge Pages Usage Accounting. But I can't find any tools that tell me about the actual per-process hugepage usage. I poked around in /proc/pid/numa_stat and found some interesting information that led me to this grossity: function pshugepage () { HUGEPAGECOUNT=0 for num in `grep 'anon_hugepage.*dirty=' /proc/$@/numa_maps | awk '{print $6}' | sed 's/dirty=//'` ; do HUGEPAGECOUNT=$((HUGEPAGECOUNT+num)) done echo process $@ using $HUGEPAGECOUNT huge pages } The numbers it gives me are plausible, but i'm far from confident this method is correct. Environment is a quad-CPU dell, 64GB ram, RHEL6.3, oracle jdk 1.7.x (current as of 20130728)

  Read the article

• Windows webserver monitor and notifier service

  - by WestDiscGolf

  I'm looking for a software tool/service, preferably opensource/free, which will run on a Windows 2003 r3 standard server which will monitor bandwidth usage of all the websites it's hosting (a break down by site would be very useful) and also send out notifications if IIS or another service (as defined) stops responding. A web interface to see the bandwidth usage and other details would be very useful. I've personally got a vps which does this kinda of monitoring but I believe this is more linked into the host itself. Does anyone have any pointers? All help is appriciated. Cheers

  Read the article

• Is Software Raid1 Using mdadm with a Local Hard Disk and GNDB Possible?

  - by Travis

  I have multiple webservers which use many small files to created dynamic web pages. Caching the web pages isn't an option. The webserver also performs writes so I need a synchronous filesystem. I'm looking to maximise performance as it's my understanding that small files is the weakness (to varying degreess) of a cluster filesystem over ethernet. Currently I'm using Centos 5.5, 64 bit. Since it's only about 300MB of data, I'm looking at mdadm using RAID-1 with the GNBD and a local hard disk using the "--write-mostly" option so the reads are done using the local hard disk. Is this possible? If so, is there any advantage to making it a tmpfs disk instead of a local hard disk? Or will the files on the local hard disk just get cached in RAM anyway so I won't see a performance gain by using tmpfs, assuming there's enough RAM available?

  Read the article

• My WD passport detected but not shown on my computer

  - by Rakesh Patel

  1TB WD harddisk is detected in laptop but drives not visible on my computer. Under disk managment drives shown without letters. Right clicking on these drives give 2 options: Delete volume Help. The same harddisk was running well on the same laptop a day before. It is also showing full size of hard drives, Healthy (Primary Partition) etc. (this happened after harddisk usage by guest). Harddisk is new only (about 5 month usage) Please suggest: Is there hardware related problem inside harddisk, if so is it repairable? Is there any option to recover data?

  Read the article

• Problem identifying which page/page/function locks whole IIS server

  - by fnovak

  Hello, I have problem identifying which page/page/function locks whole IIS server. Out of the blue whole w3wp.exe jumps to CPU 90-98% usage. I have created 3 different application pools to see which w3wp.exe service locks the processor but I am unable to find out this information. I can only see that 2 of 3 services have 0-5% usage and one is jumping around 90-98% after some while. I think some process/function/redirect/sql is doing this but I would like to eliminate it. So far I am not even able to find the source of the problem. On my local development machine with VS2010 everything works like charm and I am unable to replicate problem. The server is windows 2k3 web server, sql server 2k5 and .net 4.0 Thank you for your help, links or any information on this issue. Fero

  Read the article

• What are best monitoring tool customizable for cluster / distributed system?

  - by Adil

  I am working on a system having multiple servers. I am interested in monitoring some server specific data like CPU/memory usage, disk/filesystem usage, network traffic, system load etc. and some other my process specific data. What are available open source that can serve my purpose? If it provides to customize the parameter to be monitored and monitor your own data by creating plugin / agent. Any suggestions? I heard of Nagios, Zabbix and Pandora but not sure if they provide such interface.

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >