Search Results

Search found 5579 results on 224 pages for 'soft keyboard'.

Page 108/224 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

  • Hardware wireless switch has no effect after suspend and 13.10 upgrade

    - by blaineh
    This seems to be a fairly chronic problem, as shown by the following questions: How do I fix a "Wireless is disabled by hardware switch" error? Wireless disabled by hardware switch "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this? but no good solutions have been found! Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. All My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A ip=155.99.215.79 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. xev shows that no internal event is triggered for my wireless switch (f12), but other function keys also acting as hardware switches work fine. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. I just tried to reload bios defaults (or something) as shown by this video. Didn't work. Edit. I tried the contents of this answer, and it didn't work. Edit. I made a pastebin of dmesg. I couldn't even begin to understand the contents. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

    Read the article

  • Wireless doesn't work on a Broadcom BCM4312

    - by Boderick
    As stated, I've just upgraded to 12.04 and my Dell Inspiron 1545 isn't recognising its wireless card and I was wondering if anybody could help? Edit: Okay, so I found the wireless card by using lspci -vvv and it returned this: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- Kernel modules: ssb lsmod Module Size Used by dm_crypt 22528 0 joydev 17393 0 dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi dell_laptop 13671 0 dcdbas 14098 1 dell_laptop psmouse 72919 0 uvcvideo 67203 0 serio_raw 13027 0 videodev 86588 1 uvcvideo snd_hda_codec_idt 60251 1 mac_hid 13077 0 snd_hda_intel 32765 5 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec parport_pc 32114 0 rfcomm 38139 0 bnep 17830 2 ppdev 12849 0 snd_pcm 80845 3 snd_hda_intel,snd_hda_codec bluetooth 158438 10 rfcomm,bnep snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq binfmt_misc 17292 1 snd 62064 18 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp sky2 53628 0 ums_realtek 17920 0 uas 17699 0 i915 414603 3 wmi 18744 1 dell_wmi drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 usb_storage 39646 1 ums_realtek ifconfig -a eth0 Link encap:Ethernet HWaddr 00:23:ae:24:71:45 inet addr:192.168.1.158 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:aeff:fe24:7145/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14340 errors:0 dropped:0 overruns:0 frame:0 TX packets:10191 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15403754 (15.4 MB) TX bytes:1262570 (1.2 MB) Interrupt:18 ham0 Link encap:Ethernet HWaddr 7a:79:05:2d:b0:f7 inet addr:5.45.176.247 Bcast:5.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:5ff:fe2d:b0f7/64 Scope:Link inet6 addr: 2620:9b::52d:b0f7/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:27480 (27.4 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:433 errors:0 dropped:0 overruns:0 frame:0 TX packets:433 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:60051 (60.0 KB) TX bytes:60051 (60.0 KB) iwconfig lo no wireless extensions. ham0 no wireless extensions. eth0 no wireless extensions. the results for sudo lshw -class network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0c:00.0 logical name: eth1 version: 01 serial: 00:22:5f:77:1f:e6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f69fc000-f69fffff *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 13 serial: 00:23:ae:24:71:45 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.158 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:f68fc000-f68fffff ioport:de00(size=256) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:05:2d:b0:f7 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.45.176.247 link=yes multicast=yes port=twisted pair speed=10Mbit/s and the results of rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

    Read the article

  • Drivers for Atheros AR928X?

    - by Pato7
    I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

    Read the article

  • Bring the windows of two different apps in mac os to the front?

    - by Nicolas Kokkalis
    How do I easily bring to the front of the screen the top windows of two different application in Mac OS X? I prefer to use the keyboard only. Example Scenario: Say there are 10 Firefox and 10 TextEdit windows open. Also, say that these windows are having various different sizes so that the windows of each application fully cover the desktop. Goal: I want to bring to the front of my screen the top window of Firefox along with the top window of TextEdit, so that I can visually compare some data. Restrictions: I cannot use expose (since having 20 windows on the screen already renders expose useless) And I do not want to use multiple desktop (too complex and time consuming) I prefer to use a keyboard shortcut. Unfortunately cmd+tab brings all windows of each application to the top, covering all windows of the other applications.

    Read the article

  • Macbook Pro - Randomly sleeps and won't wake up

    - by James
    All, I have a Macbook Pro 13" (mid 2009) that has had a long time issues which seems to be getting worse. Occasionally, I will go to wake the computer with the keyboard and can't wake it. The HDD spins up, the light on the front of the computer stops blinking, but as soon as it seems like the display should light up, the HDD stops and the light begins blinking again. More rarely, the computer will suddenly sleep while I am using it and then enters the same sleep loop. The only way to resume working on the computer is to wait. Doing a hard restart just puts it right back into the 'sleep loop.' Here is an excerpt from kernel.log showing the laptops apparent narcolepsy: Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: Wake reason: OHC1 Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: Previous Sleep Cause: 5 Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 6 of Hub at 0x4000000) may have caused a wake by issuing a remote wakeup (2) Jun 5 22:20:40 james-hales-macbook-pro kernel[0]: HID tickle 31 ms Jun 5 22:20:41 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: MacAuthEvent en1 Auth result for: 20:4e:7f:48:c0:ef MAC AUTH succeeded Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: wlEvent: en1 en1 Link UP Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: AirPort: Link Up on en1 Jun 5 22:20:45 james-hales-macbook-pro kernel[0]: en1: BSSID changed to 20:4e:7f:48:c0:ef Jun 5 22:20:46 james-hales-macbook-pro kernel[0]: AirPort: RSN handshake complete on en1 Jun 5 22:20:48 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:20:54 james-hales-macbook-pro kernel[0]: Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: Wake reason: OHC1 Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: Previous Sleep Cause: 5 Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: The USB device Apple Internal Keyboard / Trackpad (Port 6 of Hub at 0x4000000) may have caused a wake by issuing a remote wakeup (2) Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: wlEvent: en1 en1 Link DOWN Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: AirPort: Link Down on en1. Reason 4 (Disassociated due to inactivity). Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: HID tickle 26 ms Jun 5 22:20:55 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: MacAuthEvent en1 Auth result for: 20:4e:7f:48:c0:ef MAC AUTH succeeded Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: wlEvent: en1 en1 Link UP Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: AirPort: Link Up on en1 Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: en1: BSSID changed to 20:4e:7f:48:c0:ef Jun 5 22:20:58 james-hales-macbook-pro kernel[0]: AirPort: RSN handshake complete on en1 Jun 5 22:21:02 james-hales-macbook-pro kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active Jun 5 22:21:08 james-hales-macbook-pro kernel[0]: I have tried reseting the SMC and reinstalling Lion (short of erasing and installing) to no avail. The Genius bar has insisted that the problem would be resolved by reinstalling Lion (which they did, but didn't fix anything, still insisting...). Please don't say "logic board." Thoughts?

    Read the article

  • Microsoft Outlook hangs when switching input language

    - by Hugo
    Hello, I have two keyboard languages, Swedish and Amerikan English. Normally, I switch language by hitting [alt]+[shift] and it works like a charm. However, suddenly Microsoft Outlook has started to hang whenever I try to switch keyboard input language. Whenever i hit [alt]+[shift] or use the menu to switch language Outlook will hang indefinitely not responding. Why? and what can I do about it? I have English Windows 2000 and Outlook 2003 with the Google Search Desktop plugin.

    Read the article

  • Sending ctrl-backslash from Windows to Linux using Synergy

    - by jrbushell
    I'm using Synergy+ to share the keyboard and mouse between a Windows and a Linux (Red Hat) PC. The Windows box is the server, Linux is the client, and both are running version 1.3.4. My Windows box is set up for English UK keyboard. In a Linux terminal window, Ctrl+\ (backslash) sends a quit signal to the currently running program - useful to kill a Python script that's run amok, for example. When I try to do this via synergy, Ctrl+- (minus) is sent instead. This has the undesired effect of resizing my terminal window :( Backslash on its own and Shift-backslash = pipe both work fine. Any ideas what's happening?

    Read the article

  • CYGWin and sshd. Accepts authentication, but won't connect

    - by timramich
    Everything I find relating to this is the "ssh-exchange-identification:" error. This doesn't happen for me. I get two lines: Connection to localhost closed by remote host. Connection to localhost closed. ssh -v localhost spits out: OpenSSH_5.8p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to localhost [::1] port 22. debug1: Connection established. debug1: identity file /home/tim/.ssh/id_rsa type -1 debug1: identity file /home/tim/.ssh/id_rsa-cert type -1 debug1: identity file /home/tim/.ssh/id_dsa type -1 debug1: identity file /home/tim/.ssh/id_dsa-cert type -1 debug1: identity file /home/tim/.ssh/id_ecdsa type -1 debug1: identity file /home/tim/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8 debug1: match: OpenSSH_5.8 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 64:e3:27:90:ef:48:93:21:38:ea:9b:0e:0b:07:b0:2a debug1: Host 'localhost' is known and matches the ECDSA host key. debug1: Found key in /home/tim/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /home/tim/.ssh/id_rsa debug1: Trying private key: /home/tim/.ssh/id_dsa debug1: Trying private key: /home/tim/.ssh/id_ecdsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password tim@localhost's password: debug1: Authentication succeeded (password). Authenticated to localhost ([::1]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: channel 0: free: client-session, nchannels 1 Connection to localhost closed by remote host. Connection to localhost closed. Transferred: sent 2008, received 1376 bytes, in 0.0 seconds Bytes per second: sent 64774.0, received 44387.0 debug1: Exit status -1 I'm really at wit's end here because I couldn't get Windows' remote shell to even work. I'm so sick of using VNC just to get to a shell. Plus Windows' shell sucks because there is nothing like screen. Thanks

    Read the article

  • Is there a good XP like windows explorer for windows Vista?

    - by Brett Ryan
    I'm still refusing to go to Windows Vista and now Windows 7 mainly due to the windows explorer, I find it cumbersome and hard to use exclusively with a keyboard. I use XP file explorer in the most basic view, the address bar at the top and files always in list view underneath. The reason I do this is because I'm almost blind and do everything from the keyboard and don't touch the mouse whilst navigating through files, this is because I can type "L[ENTER]D[Enter]B[Enter]" and know that I'm in "c:\documents and settings\Brett Ryan", and I can hit [Tab] once to go to the address bar to type in a folder. Can anyone suggest a replacement for windows explorer that brings back this basic navigational behavior?

    Read the article

  • Can I shorten my directory commands in ubuntu?

    - by Spencer Cooley
    When working on a rails app I like to open all of my files through the command line like so cd my_app gedit app/views/user/show.html.erb Is there a way that I could shorten this so that I could just write something like gedit user_views/show.html.erb ? I would like the console to stay in the main directory, I just don't like having to type out app/controller/user_controler.rb every time I want to open the user controller. I know that I could just open the file with my mouse, but I feel like moving from keyboard to mouse breaks my focus a little bit. When I can just tap away at the keyboard it seems like I have a more smooth workflow.

    Read the article

  • Can I shorten my directory commands in ubuntu?

    - by Spencer Cooley
    When working on a rails app I like to open all of my files through the command line like so cd my_app gedit app/views/user/show.html.erb Is there a way that I could shorten this so that I could just write something like gedit user_views/show.html.erb ? I would like the console to stay in the main directory, I just don't like having to type out app/controller/user_controler.rb every time I want to open the user controller. I know that I could just open the file with my mouse, but I feel like moving from keyboard to mouse breaks my focus a little bit. When I can just tap away at the keyboard it seems like I have a more smooth workflow.

    Read the article

  • How can I have my Windows keymap on Mac?

    - by Sebastian Hoitz
    On Mac, to get a "{" for example, you have to press OPTION key plus 8 to get a curly brace. But on Windows it is ALT-GR plus 7. Another example: On Windows I can press CTRL and Backspace to remove one whole word. On Mac it is OPTION + Backspace. Is there a way I can remap these Mac-driven behavior to be more Windows-like? Because this is, as a very long Windows user, a big burden on me to have such a different keyboard layout. Edit: I'm using a german keyboard layout.

    Read the article

  • Mac OS Sound Problem.

    - by Lukas Šalkauskas
    Ok, this is strange problem, and I couldn't find any solution for it yet. This happened today then @work I plugged in external speakers jack, speakers was playing, everything was OK. But after I took jack off, I couldn't hear any sound from mac speakers. It seems like disabled. So now I only can listen music through headphones or external speakers but not mac speakers. Here is a few screen-shoots: Headphones jack in: Top Menu Icon: When I press increase sound button on the keyboard: Sound Settings: Headphones jack out: Top Menu Icon: When I press increase sound button on the keyboard: Sound Settings: If you had similar situation or you know how to solve this, please do not hesitate and help me ;)

    Read the article

  • Ctrl + right click opens mutiple items instead of selecting them. How do I fix this?

    - by Malik Hassan
    Something happened to my keyboard and or mouse controls. I have a Logitech T-BB18 trackwheel and an hp NY418AA Keyboard. When I use the mouse in Windows mail and click the delete button it deletes two emails instead of one and opens all the emails that I have selected when I ctrl + click on multiple emails to select them. When I'm in Windows Explorer ctrl + click and multiple select opens all of the files that I have selected instead of just selecting them. I really need to fix this behavior. Can someone help please?

    Read the article

  • mootools slideshow not working with JQuery. Need help !

    - by Shantanu Gupta
    I am working on a site http://tapasya.co.in where i just impemented mootools slideshow. But I noticed that menubar that i was using stopped working, it was supposed to drop horizontaly but it is not being displayed now. I have used jquery for it. Please see the source of the web page. What can be the problem ? Mootools conflicting with javascript or some other problem. If I tries to use $.noConflict() it throws me an error in script Uncaught TypeError: Object function (B,C){if(B&&B.$family&&B.uid){return B}var A=$type(B);return($[A])?$[A](B,C,this.document):null} has no method 'noConflict' I tried the given solution below. But it is not working. <script type="text/javascript" src="<%= ResolveUrl("~/Js/jquery-1.3.2.min.js") %>" ></script> <script type="text/javascript" src="<%= ResolveUrl("~/Scripts/SlideShow/js/mootools.js") %>"></script> <script type="text/javascript" src="<%= ResolveUrl("~/Scripts/SlideShow/js/slideshow.js") %>"></script> <script type="text/javascript" src="<%= ResolveUrl("~/Scripts/SlideShow/js/lightbox.js") %>"></script> <script type="text/javascript"> // <![CDATA[ $.noConflict(); var timeout = 500; var closetimer = 0; var ddmenuitem = 0; function ddmenu_open(){ ddmenu_canceltimer(); ddmenu_close(); ddmenuitem = $(this).find('ul').css('visibility', 'visible'); } function ddmenu_close(){ if(ddmenuitem) ddmenuitem.css('visibility', 'hidden'); } function ddmenu_timer(){ closetimer = window.setTimeout(ddmenu_close, timeout); } function ddmenu_canceltimer(){ if(closetimer){ window.clearTimeout(closetimer); closetimer = null; }} $(document).ready(function(){ $('#ddmenu > li').bind('mouseover', ddmenu_open) $('#ddmenu > li').bind('mouseout', ddmenu_timer) }); document.onclick = ddmenu_close; // ]]> </script> <script type="text/javascript"> //<![CDATA[ window.addEvent('domready', function(){ var data = { '1.jpg': { caption: 'Acoustic Guitar,electric,bass,keyboard, indian vocal traning and Music theory.' }, '2.jpg': { caption: 'Acoustic Guitar,electric,bass,keyboard, indian vocal traning and Music theory.' }, '3.jpg': { caption: 'Acoustic Guitar,electric,bass,keyboard, indian vocal traning and Music theory.' }, '4.jpg': { caption: 'Acoustic Guitar,electric,bass,keyboard, indian vocal traning and Music theory.' } }; // Note the use of "linked: true" which tells Slideshow to auto-link all slides to the full-size image. //http://code.google.com/p/slideshow/wiki/Slideshow#Options: var mootoolsSlideshow = new Slideshow('divbanner', data, {loader:true,captions: true, delay: 5000,controller: false, height: 370,linked: false, hu: '<%= ResolveUrl("~/Scripts/SlideShow/Images/") %>', thumbnails: true, width: 1002}); // Here we create the Lightbox instance. // In this case we will use the "close" and "open" callbacks to pause our show while the modal window is visible. var box = new Lightbox({ 'onClose': function(){ this.pause(false); }.bind(mootoolsSlideshow), 'onOpen': function(){ this.pause(true); }.bind(mootoolsSlideshow) }); }); //]]> </script>

    Read the article

  • Linking "Wave Volume" to "Main Speaker Volume"

    - by ZorbaTHut
    I've got a Logitech keyboard and a digital sound device. The Logitech keyboard has a little volume wheel that sets the Main Speaker Volume. The digital sound device ignores the Main Speaker Volume and only pays attention to Wave Volume. See the issue? I'm looking for a program that can link Wave Volume to Main Speaker Volume. The closest I've found is a little utility named VolumeTracker, but it eats an entire CPU core, which is a bit much for a program of this functionality. Alternatively, I'd take a way to make the standard Logitech drivers change Wave Volume instead of Main Speaker Volume.

    Read the article

  • Can't avoid starting macbook in safe mode

    - by Aaron Brown
    I recently spilled some water on my MacBook (mid-2010) keyboard and it shorted out several of the keys. Notably, control and left option don't work, and the system thinks that the left shift is permanently held down. I plugged in an external USB keyboard and all keys work fine; there's only one problem: The computer always starts in safe mode because the shift key is held down. I've tried holding down other keys (escape, space, c to name a few) and the control key doesn't work so I can't try that. I also tried KeyRemap4Macbook but it doesn't work in safe mode and it doesn't seem to help on startup for me. I can log in to Windows with no problems (with rEFIt) and I can browse the internet with no problems, but I can't program on the Mac OS side in safe mode (it's really slow). Which is mainly what I use this Macbook for. Any ideas out there on how to avoid starting in safe mode?

    Read the article

  • Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

    - by Code Sherpa
    I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

    Read the article

  • USB mouse disconnecting and reconnecting randomly and often

    - by Marc
    Specs: Q6600, evga 780I sli mobo, 4gig RAM, logitech MX518, windows 7 64bit, evga gtx 260, 650W power supply (single rail) The problem I am having is my mouse will reconnect/disconnect (will even hear the sounds from windows) and the light on the bottom of the mouse will turn off/turn on as it starts working again. It really sucks to be playing a game (and happens on desktop as well) for the mouse to just die out for a few seconds and come back. Sometimes it will not happen for days and other times it will do it 2 or more times within 15 seconds. I have tried two different wired mice, have tried multiple USB ports (on front of computer, back of computer, have also used a USB hub and have also plugged in a card that connects to the USB connectors on the motherboard and adds a few usb ports to the back of the computer, and I also bought a USB 2.0 PCI card and that did not help). Nothing else seems to reconnect like this, my usb keyboard has never once cut out like the mouse does and neither have any of the other devices I have connected (webcam, usb hub, various devices sometimes connected through usb cables, and IR reciever for windows media center remote). I have disconnected all usb devices except for my keyboard and mouse and the problem still occurs. I guess it could be something wrong with my motherboard but since no other devices behave similarly I'm just hoping that it is some kind of driver conflict. Installing logitech's drivers has had no effect. It seemed at first that if I go to device manager and uninstall HID-compliant mouse (that and logitech mx518 are listed) that would fix it but it doesn't seem to work anymore or at least not every time (it keeps reinstalling). I have googled "usb mouse disconnects and reconnects" and it seems to be fairly common but none of those were resolved. To stick some easy steps: It happens with or without the drivers installed It has happened with multiple mice on the same computer Bios is the latest version (P08) Motherboard drivers are the latest version Device manager is listing no problems on any USB devices Happens with every usb port, even addon usb cards Happens when all usb devices aside from mouse and keyboard are unplugged I read that maybe it is an IRQ conflict and I tried to look into that but did not really know what was going on, but didn't see anything obviously wrong. Thanks for any help guys, its driving me crazy!

    Read the article

  • $.noConflict() not working with mootools slide show. Need help !

    - by Shantanu Gupta
    I am working on a site http://tapasya.co.in where i just impemented mootools slideshow. But I noticed that menubar that i was using stopped working, it was supposed to drop horizontaly but it is not being displayed now. I have used jquery for it. Please see the source of the web page. What can be the problem ? Mootools conflicting with javascript or some other problem. If I tries to use $.noConflict() it throws me an error in script Uncaught TypeError: Object function (B,C){if(B&&B.$family&&B.uid){return B}var A=$type(B);return($[A])?$[A](B,C,this.document):null} has no method 'noConflict' I tried the given solution below. But it is not working. <script type="text/javascript" src="<%= ResolveUrl("~/Js/jquery-1.3.2.min.js") %>" ></script> <script type="text/javascript" src="<%= ResolveUrl("~/Scripts/SlideShow/js/mootools.js") %>"></script> <script type="text/javascript" src="<%= ResolveUrl("~/Scripts/SlideShow/js/slideshow.js") %>"></script> <script type="text/javascript" src="<%= ResolveUrl("~/Scripts/SlideShow/js/lightbox.js") %>"></script> <script type="text/javascript"> // <![CDATA[ $.noConflict(); var timeout = 500; var closetimer = 0; var ddmenuitem = 0; function ddmenu_open(){ ddmenu_canceltimer(); ddmenu_close(); ddmenuitem = $(this).find('ul').css('visibility', 'visible'); } function ddmenu_close(){ if(ddmenuitem) ddmenuitem.css('visibility', 'hidden'); } function ddmenu_timer(){ closetimer = window.setTimeout(ddmenu_close, timeout); } function ddmenu_canceltimer(){ if(closetimer){ window.clearTimeout(closetimer); closetimer = null; }} $(document).ready(function(){ $('#ddmenu > li').bind('mouseover', ddmenu_open) $('#ddmenu > li').bind('mouseout', ddmenu_timer) }); document.onclick = ddmenu_close; // ]]> </script> <script type="text/javascript"> //<![CDATA[ window.addEvent('domready', function(){ var data = { '1.jpg': { caption: 'Acoustic Guitar,electric,bass,keyboard, indian vocal traning and Music theory.' }, '2.jpg': { caption: 'Acoustic Guitar,electric,bass,keyboard, indian vocal traning and Music theory.' }, '3.jpg': { caption: 'Acoustic Guitar,electric,bass,keyboard, indian vocal traning and Music theory.' }, '4.jpg': { caption: 'Acoustic Guitar,electric,bass,keyboard, indian vocal traning and Music theory.' } }; // Note the use of "linked: true" which tells Slideshow to auto-link all slides to the full-size image. //http://code.google.com/p/slideshow/wiki/Slideshow#Options: var mootoolsSlideshow = new Slideshow('divbanner', data, {loader:true,captions: true, delay: 5000,controller: false, height: 370,linked: false, hu: '<%= ResolveUrl("~/Scripts/SlideShow/Images/") %>', thumbnails: true, width: 1002}); // Here we create the Lightbox instance. // In this case we will use the "close" and "open" callbacks to pause our show while the modal window is visible. var box = new Lightbox({ 'onClose': function(){ this.pause(false); }.bind(mootoolsSlideshow), 'onOpen': function(){ this.pause(true); }.bind(mootoolsSlideshow) }); }); //]]> </script>

    Read the article

  • How to debug ssh authentication failures with gssapi-with-mic

    - by Arthur Ulfeldt
    when i ssh to DOMAIN\user@localhosts-name authentication works fine through gssapi-with-mic: debug3: remaining preferred: gssapi,publickey,keyboard-interactive,password debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug2: we sent a gssapi-with-mic packet, wait for reply debug3: Wrote 112 bytes for a total of 1255 debug1: Delegating credentials debug3: Wrote 2816 bytes for a total of 4071 debug1: Delegating credentials debug3: Wrote 80 bytes for a total of 4151 debug1: Authentication succeeded (gssapi-with-mic). when I connect to a different machine It just seems to stop half way through the gssapi-with-mic authentication: debug1: Next authentication method: gssapi-with-mic debug2: we sent a gssapi-with-mic packet, wait for reply debug3: Wrote 112 bytes for a total of 1255 debug1: Delegating credentials debug3: Wrote 2816 bytes for a total of 4071 <----- ???? debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive How should I go about finding out what happened differently the second time. How can I find out if/why the auth was rejected by kerberos?

    Read the article

  • Two virtual computers using one laptop?

    - by JP19
    Hi, I have a laptop and an external display. I am able to use the external display either as extended desktop OR duplicate desktop. I also use a separate keyboard and mouse. So effectively, the laptop acts just as a box without display. I want to know is it possible to use the laptop as 2 virtual PCs. (with separate control). I.E., one person uses the laptop as a laptop, and other person can simultaneously connect a keyboard and mouse and the external display and effectively get a second PC. OS I am using - windows (thought solution for other OSes are welcome). Laptop is a Dell Precision M6300. thanks JP

    Read the article

  • Looking for a software solution which acts like a hardware KVM

    - by Daisetsu
    I've seen programs like Synergy before which allow a keyboard and mouse to be used across multiple systems. Unfortunately Synergy treats both systems like they are the same thing (when you move the mouse too far to the right it jumps to the other computer, along with keyboard input). I only have 1 monitor so what I need to do here is have a quick way to view my other desktop that is easy to manage. Remote desktop is difficult because you have to take it out of fullscreen, then minimize it and then re-maximize it when you want to use it again. If there were a single button I could hit to switch to the other computer that would be optimal. Both computers are on the same lan.

    Read the article

  • How to take a screenshot on Windows 7 and auto create screenshot file on desktop like Mac?

    - by Ali
    I'm trying to find information how do we take a screenshot on Windows 7 that will actually create a screenshot file like .png in to your desktop like on mac where you can do it by press Command+Control+Shift+4. In windows all I know is that I can do it by press press = Windows captures the entire screen and copies it to the clipboard. or for the Active windows I can just do hold and press = Windows captures only the currently active window and copies it to the clipboard. Right now I'm using maComFort which it gives me functionality of Mac like keyboard that I can take screenshot in such the same way with Mac OS X but really it changes many of the key in my keyboard in the way I don't like. So I wonder if there is a better way?

    Read the article

  • How can I make Windows Media Player ignore global hotkeys in Windows 7?

    - by schnapple
    I have Windows 7 and a Logitech G15 keyboard. One of the programs with the Logitech G15 allows you to control media players such as Winamp with the playback keys on the keyboard. Problem I'm having is that, even though I have told this program to not control Windows Media Player, every time I use it to pause Winamp, it then hits plays (or unpauses) Windows Media Player. Even more annoying given that Windows Media Player isn't even running as an active GUI program and instead as a background process, so I hear the sound of whatever the last video it was I playing. If I end-task wmplayer.exe it spins right back up but at least now it has no knowledge of a video to play, but this is annoying. How can I either a) Have Windows Media Player in Windows 7 completely unload when I close it, or b) Have Windows Media Player in Windows 7 ignore any sort of global hotkeys?

    Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >