Search Results

Search found 6346 results on 254 pages for 'turn a'.

Page 108/254 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• Experience with AMCC 3ware 9650se raid cards? Ours seems dead

  - by antiduh

  We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated.

  Read the article

• Pros/cons to turning off cable modem

  - by Jay

  A little off the wall perhaps, but ... I have a cable modem and a router for a wireless home network. Is it a good or a bad idea to turn it off at night and during the day when we're all at work or school? Or should I leave it on 24/7. I was thinking that leaving it on constantly makes me more vulnerable to hackers, not to mention wasting electricity. (Though I'd guess the amount of electricity used by a cable modem and a router is probably pretty trivial. Still, every little bit helps.) When I have turned it off and turned it on again, it takes several minutes for it to go through its little dialog with the cable company and get me connected to the Internet again, which is annoying but not a big deal. Anyone know any good reasons one way or the other?

  Read the article

• Windows 7 has trouble installing software with Visual C++ 2005 & 2008

  - by John Fitzgerald

  I have been reinstalling windows 7 over and over again on an ASUS P5lD2 2Gb Ram 3Ghz P4 because it ultimately looses the contents of "Turn Windows Features On or Off" after I install software like Autocad 2010 & Microsoft Office 2007. I get install errors like 1935 and 1704 on the way tried different fixes at different times (install software in different order to try and isolate problem too). Ultimately I force the software to install after much buggering and end up loosing the contents of "TWFOOO" Should I be installing some older items like .net framework 1.1, 2.0 and visual studio items like vcredist_x86.exe? getting a bit lost because of compounded problems...

  Read the article

• How can I install a headless JDK on an Ubuntu Jaunty server?

  - by Hanno Fietz

  I recently set up a build server that requires a JDK to run (for example, to compile the Java sources). The OpenJDK package in Ubuntu pulls in the OpenJDK JRE as a dependency which, in turn, depends on a large number of packages that are only relevant for graphical environments. For the standard JRE, there's a headless version of the package, but for the JDK, no. This issue has been discussed in various places before, and one solution that I found and used was this: $ apt-get --no-install-recommends -d install openjdk-6-jdk $ dpkg -i --ignore-depends=openjdk-6-jre /path/to/just-downloaded.deb While this worked, it now leaves my system with a broken dependency tree and apt-get refuses further installs untill I run apt-get -f. Is there a better solution to this?

  Read the article

• JZ0SJ: Metadata accessor information was not found on this database.

  - by Anthony Kong

  The complete message is: (JZ0SJ: Metadata accessor information was not found on this database. Please install the required tables as mentioned in the jConnect documentation The server is Adaptive Server Enterprise/15.5/EBF 18380 SMP ESD#3/P/x86_64/Enterprise Linux/asear155/2531/64-bit/FBO/Fri Jan 14 07:04:05 2011 Google search does not turn up definite answer to the problem. A lof of result are rather dated too. I checked the documentation but it does not mention any tables. What is the root cause of this problem? At the very least I would like to see a list of the required tables somewhere?

  Read the article

• Post Error, Fixed/Removable Media Error

  - by Dan

  Hi, I really do not know what I am missing here. I ordered parts for a new server. The board is an Intel s3420GP. From the diagnostic LEDs I get the error message: 0xB1h which corresponds to "Fixed Media: Disabling fixed media" and 0xB8h which corresponds to "Removable Media: Resetting removable media device." I can not for the life of me figure out what it is talking about. I have two identical motherboards and both gave the error message. I don't have a second CPU yet, so I can't test that. There are no beeps or anything. It seems the server resets every 10 seconds or so (the speaker does work, I put the RAM in the wrong slots on purpose to test this out, and the correct error POST code came up) Please help me, I'm not sure where else to turn or to ask

  Read the article

• Why is systemd not setting my system time?

  - by Alex Chamberlain

  I'm running Arch Linux. Recently, when I turn on my PC, the system time is set to 1:00 1 January 1970 - presumably the 1:00 o'clock is from the timezone shift. Does anyone have any ideas why systemd isn't setting my system time correctly? Some useful output (I think)... [root@alex-desktop network.d]# timedatectl status Local time: Sun 2013-06-09 16:33:04 BST Universal time: Sun 2013-06-09 15:33:04 UTC RTC time: Sun 2013-06-09 15:18:50 Timezone: Europe/London (BST, +0100) NTP enabled: yes NTP synchronized: no RTC in local TZ: no DST active: yes Last DST change: DST began at Sun 2013-03-31 00:59:59 GMT Sun 2013-03-31 02:00:00 BST Next DST change: DST ends (the clock jumps one hour backwards) at Sun 2013-10-27 01:59:59 BST Sun 2013-10-27 01:00:00 GMT

  Read the article

• External optical drive won't plug 'n play...sometimes.

  - by Connor

  alright, I've looked a lot of different ways, but here goes. i have an external DVD burner that connects via USB and should be plug 'n play however sometimes when I connect it a message pops up requesting any CD or installation software it came with. It didn't come with any though. The confusing part is that if I wait a couple weeks and plug it in, then it works fine, but if I turn it off and back on the problem arises again. I've tried different computers, same problem. There's little to no customer support from the company, Ativa, and no drivers for the product. I'm hoping there's a registry trick for this. any help?

  Read the article

• Port forwarding does not work always?

  - by ITFan

  I opened port 25374, this is eMule TCP port, then I use canyouseeme.org to check if it is really opened. I got the weird problem : when eMule is running, canyouseeme.org see my port. I got the message : "Success: I can see your service on xxx.xx.xxx.xx on port (25374) Your ISP is not blocking port 25374" When I close eMule then check the port again on canyouseeme.org I got : Error: I could not see your service on xxx.xx.xxx.xx on port (25374) Reason: Connection timed out But when I turn off the windows firewall I got a different error : Error: I could not see your service on xxx.xx.xxx.xx on port (25374) Reason: Connection refused Can anyone please explain to me why it happened like that and how to make the port always opened ? Thanks

  Read the article

• Can a web server and XBMC HTPC co exist happily?

  - by Mild Fuzz

  I have a machine that is currently dedicated to running my home theatre. It is way more powerful than it needs to be, and spec wise would have no problem running both a few websites and an HTPC What I wanted to know is that is this was a reasonable thing to expect of a single machine? 90% of the time, all it's power would be just for the web server ( and the odd torrent) Currently it's running Windows, but I am pretty sure I will have to turn it into a Linux box Will I run into any problems? Is there anything I need to know before I start? Any prerequisites? The webserver will be required to run Ruby on Rails sites mainly, but might be called upon to run PHP for Wordpress also.

  Read the article

• nVidia Control Panel Won't Recognize SLI

  - by Nakaan

  So yesterday I bought a brand new, 1,000W PSU to replace my 650W one and to allow for SLI. I install it and my second card (both are GTX 560 ti cards). I reinstalled my drivers and my system recognizes both cards. The control panel says "GTX 560 ti x2", I can select between them for Physx, sound output, picture output (although I only have one hooked up to my monitor), etc. But the kicker is I can't turn on SLI. Everything I've read says I'll get a balloon notification saying I can use SLI and the control panel will have a new section, etc, but none of those things happens. Anyone have any ideas? System: Win7 Professional x64 2x GTX 560 ti 3.1 GHz Intel Core i5 1,000W Xion PSU 8GB RAM (Can't think of my motherboard right now) Note: My PSU and MOBO both say they're SLI certified and I'm using an SLI bridge. Edit: Formatting changes

  Read the article

• Incorrect viewport on monitor everytime computer is booted

  - by doldertfo

  Hi, Every time I turn on my PC the viewport isn't aligned correctly on the screen - there is always a black strip on the right hand side. This is not a big issue as it can be resolved by pressing the menu button on the screen and doing a factory reset. However it is irritating having to do it every time. I am using a flat screen monitor with vga connections. The weird thing it never used to happen before with the tower Im using. Is potentially out of date drivers a problem? Thanks.

  Read the article

• Incorrect viewport on monitor everytime computer is booted

  - by dolderto

  Hello, Every time I turn on my PC the viewport isn't aligned correctly on the screen - there is always a black strip on the right hand side. This is not a big issue as it can be resolved by pressing the menu button on the screen and doing a factory reset. However it is irritating having to do it every time. I am using a flat screen monitor with vga connections. The weird thing it never used to happen before with the tower Im using. Is potentially out of date drivers a problem? Thanks.

  Read the article

• Monitor sleep in Windows XP does not work. Is there an add on to force it?

  - by bert

  I have an EEE box with XP Home and a DVI connected TFT, and it does not sleep the monitor. It only starts working after I go to the energy control panel and turn it off and on again. Then the timed sleep works for the current session of computer use. After a shut down and boot next day, sleep does not work again (it is still set in the preferences however). What can hold the sleep function from working? Are there issues with Skype or MSN? Is there a utility to be less critic to processes interrupting sleep and offer a more reliable monitor sleep function for XP?

  Read the article

• How to disable power to USB ports when laptop is in sleep mode

  - by Greg

  I have a Windows7 laptop with two external 2.5" HDDs and a cooling pad connected through USB ports. When I put the laptop to sleep, these devices are still powered on - the fan in the cooling pad is still spinning, the drives are still spinning. I want to set it all up so that they power down when in sleep. I tried setting the Allow the computer to turn off this device to save power option in the USB Root Hubs' Properties in Device Manager and enabling USB selective suspend in power options - it didn't work. As it's a laptop, BIOS options are extremely locked down, so I can't even see anything relevant to sleep in there. Is it even possible to do this?

  Read the article

• How to boot windows 8 in a dual boot along with windows 7? [migrated]

  - by GoldDove

  I have installed a WIndows 8 evaluation about a week ago. Usually, it asks me every time I turn on my computer whether to boot into windows 8 or windows 7. The default was windows 8 after 30 seconds. I changed that just yesterday to be default windows 7 after 5 seconds. And after I changed the setting, I went ahead and went into windows 8 and did my work. Today, when I turned on my computer, it is failing to ask me which one to boot it in. It simply boots directly into Windows 7. Is there any reason for this? Can I no longer boot into Windows 8?

  Read the article

• Windows Swap (Page File): Enable or Disable?

  - by d03boy

  From my personal experience I've noticed that disabling the page file in Windows XP has given me, in general, the most speed gain out of any other software change I can make. Obviously this has to be done when a significant amount of RAM is available. Typically I find that it works nicely with +2GB of RAM. The only issues I've ever really had were loading up Adobe Photoshop. Is this really a speed improvement or am I imagining it? Note: In order to actually turn it off, you must not just set it to 0MB, but disable it. Otherwise Windows will just expand it when it needs to in order to meet its needs.

  Read the article

• How to manage iowait over cifs?

  - by Silvia

  For backup purposes we have Cifs file Server running that contains encrypted containers for backing up the more sensitive data. The container is mounted with cryptsetup and loop as a local filesystem and the rsync is used for backups. Because the Cifs server is not the fastest machine ever built, running the rsync process results in an iowait on the servers running the backup which in turn drives Nagios into an email frenzy. The question is, how do reduce the iowait on the server? Configuring Nagios to not report seems more like a workaround then a solution. Stretching the backups over different time intervals is already done with little effect and spending money is also not an option because apparently, we are talking about a "non-critical system".

  Read the article

• Mountable online storage (no syncing)

  - by Sam

  I have a Linux VPS that I would like to turn into a media server. Like most cheap VPS's, it has a fairly small storage capacity. What I would like to do is attach the box to an online backup system such as SpiderOak or DropBox, where the files would reside and be directly accessible to either a webserver or media server software. Since the VPS hdd is small, I do not want the files to be synced to it. I would like a storage system that is online only. Ideally mountable like a network drive. Are there any services that suit my needs, or workarounds for services such as SpiderOak that do not require syncing?

  Read the article

• SSL certificate: unable to get local issuer certificate

  - by celwell

  I'm running Debian (Lenny). When I run this: curl --ssl https://www.google.com I get this error: curl: (60) SSL certificate problem: unable to get local issuer certificate More details here: http://curl.haxx.se/docs/sslcerts.html curl performs SSL certificate verification by default, using a "bundle" of Certificate Authority (CA) public keys (CA certs). If the default bundle file isn't adequate, you can specify an alternate file using the --cacert option. If this HTTPS server uses a certificate signed by a CA represented in the bundle, the certificate verification probably failed due to a problem with the certificate (it might be expired, or the name might not match the domain name in the URL). If you'd like to turn off curl's verification of the certificate, use the -k (or --insecure) option.

  Read the article

• How to rotate log files when running pyapns and twistd

  - by Henrik

  I use pyapns (Iphone push server) which in turn uses twisted (twistd daemon). twistd daemon produces twistd.log files. It rotates them to twistd.log.1, twistd.log.2 and so on when twistd.log reaches 1MB but it doesn't use logrotate so I guess it's built in. The problem is that this continues forever and that old log files are never deleted. This eventually fills my disk. I've tried to use logrotate or similar to rotate the logs, but then I would need to run logrotate very very often since I need to rotate BEFORE twistd.log reaches 1MB. This could happen within a second for all I know depending on how much log is produced. So how could I logrotate without hacking pyapns/twistd scripts?

  Read the article

• help with Outlook Exchange server and curl

  - by stib

  I work on a mac in a building full of PCs, and the IT department here doesn't have IMAP access turned on on the exchange servers. So I miss a lot of meetings because I don't get reminders because I access my mail via Outlook Web access. I had written a script to scrape my Outlook Web Access calendar and turn it into iCal format, so I could get my reminders via thunderbird or iCal.app. It basically downloaded the calendar page via curl, parsed the HTML and reformatted all the appointments as ical. it wasn't elegant, but it worked. Then they changed to outlook 2007, and it doesn't work any more. I have a sketchy knowledge of curl, and almost zero knowledge of how outlook works. Can anyone point me towards a reference for getting calendar info out of an exchange server without using outlook? If I can configure curl to get the HTML I will be happy, but if there's a more elegant way, such as getting the calendar info as XML I'll be delirious.

  Read the article

• Visual Studio 2012 Installation fails on Windows 7

  - by Vipul

  I am trying to install Visual Studio 2012 on Windows 7 Home Premium 64-bit machine, but installation fails. I tried to install all version (premium, ultimate etc..) but getting below error. Machine is not domain joined and logged in as administrative user. I was using Security Essentials but turn it off before the installation. Installation source is from MSDN. Error log is too big to upload, important portion from the log: [2B6C:2580][2012-09-16T23:06:40]: MUX: ERROR: The type initializer for 'System.Windows.Media.FontFamily' threw an exception.

  Read the article

• Disable PXE progamatically in parallels?

  - by Stefan Lasiewski

  I'm running Parallels 4.0 on Mac OS X 10.5.8. I'm trying to create a bunch of Virtual Machines from the commandline, using the prlctl tool, like so: $ prlctl create test1 -o linux -d centos $ prlctl set test1 --device-del cdrom0 $ prlctl start test1 Now, each time I start a new VM, the VM spends time waiting for a PXE boot. I'd like to turn this off. Can I disable PXE requests using Parallels or a Parallels commandline tool? Or, can I set the boot order of a VM from the commandline?

  Read the article

• Visible Keylogger (ie not evil)

  - by Ben Haley

  I want keylogging software on my laptop for lifelogging purposes. But the software I can find is targeted towards stealth activity. Can anyone recommend a keylogging software targeted towards personal backup. Ideal Functionality Runs publicly (like in the task bar). Easy to turn off (via keyboard shortcut is best... at least via button click) Encrypted log Fast Free Cross platform ( windows at least ) The best I have found is pykeylogger which does not attempt to be stealthy, but does not attempt to be visible either. I want a keylogger focused on transparency, speed, and security so I can safely record myself. *note: Christian has a similar question with a different emphasis

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >