Search Results

Search found 18580 results on 744 pages for 'wireless connection'.

Page 108/744 | < Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >

• fast opening and closing connection with a specific port

  - by michale

  We have a Main application named "Trevor" installed in 2008R2 machine named "TEAMER12" which is slow now. One more application named "TVS" also running in and found there were many connections per second occurring to port 5009. netstat tool mentions that some fast connection open/close seen for port 5009 So first it will be listening mode like shown below TCP 0.0.0.0:5009 TEAMER12:0 LISTENING then establishes connection like TCP 127.0.0.1:5009 TEAMER12:49519 ESTABLISHED TCP 127.0.0.1:5009 TEAMER12:60903 ESTABLISHED After that iwill become TIME_WAIT and i could see several entries like shown below TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT after that it will establish connection like TCP 127.0.0.1:60903 TEAMER12:5009 ESTABLISHED TCP 127.0.0.1:64181 TEAMER12:microsoft-ds ESTABLISHED again it will go several entries like TIME_WAIT TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT Finally it will establish like this TCP 172.26.127.40:139 TEAMER12:0 LISTENING TCP 172.26.127.42:139 TEAMER12:0 LISTENING TCP 172.26.127.42:5009 TEAMER12:64445 ESTABLISHED TCP 172.26.127.42:64445 TEAMER12:5009 ESTABLISHED Can any body tell me whats the reason behind why many connections per second occurring to port 5009 and why application slow?

  Read the article

• Connection to mysql server in SYN_SENT

  - by Sunil

  We are facing a strange problem from last few days between our application server and database server(Mysql): connection to database server from application server hangs in SYN_SENT state and after that we are not able to make any connection to database server on mysql port(3306). When we checked the netstat output on database server its in SYN_RECV state. What I can figure out is mysql server is receiving the SYN request and responding also and its not reaching to the client hence SYN_RECV at server side and SYN_SENT at client side. I think SYN_SENT state should go after some time and because of this other db connection attempts to same server should not hang. Does anybody have any idea how can we resolve this issue? Out setup details : Application server: RHEL 5.4, kernel-release = 2.6.18-164.el5, x86_64 Database server: Mysql Version : 5.1.49 RHEL 5.4, kernel-release = 2.6.18-164.el5, x86_64

  Read the article

• Monitoring/logging a malfunctioning internet connection

  - by Pekka

  I have a mysterious internet connection problem: Every 15-20 minutes, the connection will become very slow, and take 2-3 minutes for anything to load. I've had a technician from the ISP over here to test the hardware, and everything is in pristine condition. They have no other explanation than a configuration error on my machine, a possibility I can exclude 90% because I'm experiencing the same problems with another machine. I will have to monitor the situation now, and I would like to run a program that logs when internet connections become slow. I thought about putting something together using at and wget. Does anybody know of some other tool for this that does this out of the box - maybe something with an adjustable request frequency, logging connection speeds etc.?

  Read the article

• Connecting two pcs through cable, at the same time as wireless

  - by Steffen

  I've got 2 pcs setup with WLAN - however when I copy files between the machines it takes forever (obviously, since I run 801.11g). So I thought, why not just connect them directly with a cable (my wireless router is the other end of the house, that's why I don't use cables to that) However how should I configure the LAN connection on each machine, so I can use it for transferring files between them, whilst using my WLAN to access the Internet ? I was thinking about letting one machine be gateway, but then Windows pops up with a lot of warnings (basically it says this won't work when you're using two disjoint networks) And now I'm at a loss as to what to try.

  Read the article

• Simulating a low-bandwidth, high-latency network connection on Linux

  - by Justin L.

  I'd like to simulate a high-latency, low-bandwidth network connection on my Linux machine. Limiting bandwidth has been discussed before, e.g. here, but I can't find any posts which address limiting both bandwidth and latency. I can get either high latency or low bandwidth using tc. But I haven't been able to combine these into a single connection. In particular, the example rate control script here doesn't work for me: # tc qdisc add dev lo root handle 1:0 netem delay 100ms # tc qdisc add dev lo parent 1:1 handle 10: tbf rate 256kbit buffer 1600 limit 3000 RTNETLINK answers: Operation not supported How can I create a low-bandwidth, high-latency connection, using tc or any other readily-available tool?

  Read the article

• Set up ad hoc wireless connection between Windows Vista and Mac OS X

  - by Skarab

  I have the following problem - Windows Vista does not connect to adhoc wireless network created on my Macbook. I have tried to create secured (with 40 bit key) and unsecured network but Windows Vista still has problems to connect. Windows VISTA informs me -- after 5 minutes of attempts - that setting up the connection -- with my adhoc network -- took too much time. My question: do I need to configure some settings on Vista to connect it to my Macbook? Maybe it is a problem with DHCP? Edited: I have tried the other way: http://superuser.com/questions/202890/set-up-an-adhoc-network-in-windows-vista-to-connect-to-and-share-the-internet-con

  Read the article

• opening and closing connection with port happening fastly

  - by michale

  We have a Main application named "Trevor" installed in 2008R2 machine named "TEAMER12" which is slow now. One more application named "TVS" also running in and found there were many connections per second occurring to port 5009. netstat tool mentions that some fast connection open/close seen for port 5009 So first it will be listening mode like shown below TCP 0.0.0.0:5009 TEAMER12:0 LISTENING then establishes connection like TCP 127.0.0.1:5009 TEAMER12:49519 ESTABLISHED TCP 127.0.0.1:5009 TEAMER12:60903 ESTABLISHED After that iwill become TIME_WAIT and i could see several entries like shown below TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT after that it will establish connection like TCP 127.0.0.1:60903 TEAMER12:5009 ESTABLISHED TCP 127.0.0.1:64181 TEAMER12:microsoft-ds ESTABLISHED again it will go several entries like TIME_WAIT TCP 127.0.0.1:49156 TEAMER12:5009 TIME_WAIT Finally it will establish like this TCP 172.26.127.40:139 TEAMER12:0 LISTENING TCP 172.26.127.42:139 TEAMER12:0 LISTENING TCP 172.26.127.42:5009 TEAMER12:64445 ESTABLISHED TCP 172.26.127.42:64445 TEAMER12:5009 ESTABLISHED Can any body tell me whats the reason behind why many connections per second occurring to port 5009 and why application slow?

  Read the article

• Speeding up Connection Between Computer and Wireless/Bridged Router

  - by Justian Meyer

  Hey everyone, I looked through other questions, but didn't find useful responses. Our main computer has a dl speed of 6 Mbps, but some of our other computers are getting only 40-200 Kb! The router is wireless, but all computers are connected using a Netgear Wall-Plugged Bridge XE102, which transmits information via the building's powerline. It can't be the hardware itself, however, because some computers still manage decent speeds. The computers afflicted are running on Microsoft XP Service Packs 2 and 3, but so are computers that are totally functional. These speeds severely impede on productivity and are excruciatingly frustrating when trying to cram in time in the early hours. Could it be an issue with the computer? Location? Router? Many thanks in advance, Justian

  Read the article

• Restarted computer, now wireless and Visual Studio is broken

  - by Earlz

  I installed the new update for TortoiseSVN which requires a restart. Upon restarting a lot of things broke. I'm currently running a virus scan, but what would cause this? Among the things that no longer work is Visual Studio. It now says "Invalid License Data. A reinstall is required" and my wireless internet does not work. When I go to connect to my network it will say "Can not connect" and then when I diagnose the problem it says "The connection to accesspoint-name was cancelled" (and yes, canceled is misspelt like that) What could have caused this? My computer did not install any updates or anything like that upon restarting and it was running fine before I restarted it.

  Read the article

• Problem with internet connection

  - by vijay.shad

  Hi all, I am working on windows vista. I have got two internet connections, one is wifi connection with high speed. And other is mobile network connection. There is a very strange problem I am getting. When I connect to wi-fi connection I an not able to serf internet(actually not all the sites). I am able to search on Google but when i click on any link in the search list it does not open. But I am able to serf all the pages in google.com domain and also all the pages in stackoverflow domain. But i am not able to go to page http://repo1.maven.org/maven2 But When I am connected by my mobile network. I am able to serf any site. Can you please tell me what might me the problem with my settings.

  Read the article

• Windows VPN not authenticating from ADSL to Wireless link

  - by deanvz

  I have a normal windows VPN on a computer connecting to a 196.201.x.x/24 IP. If this VPN tries to connect from any address in the 41.x.x.x range it cant get there. The server is a normal windows 2008 server, running exchange with a PPPoE IP natted to a public IP on the public gateway of the wireless network as the server is on site and its connectivity is derived from Mikrotik RB's. The computer on the 41 range can traceroute and ping the server, but the VPN does not authenticate. When on the network or any other, the VPN works fine. Is there something that could be configured on the VPN client? All firewall settings of a standard ADSL router have been checked and found to block only ICMP's. Is this a VPN configuration problem or a network issue?

  Read the article

• Does a bad Internet connection increase bandwidth usage?

  - by Synetech

  My (Rogers) cable connection has been pretty bad recently (channels 3 and 10 are particularly fuzzy—it’s analog, not digital cable). Not surprisingly, this has caused my cable modem to drop out and have to reestablish a connection a couple of times since it started. The poor connection of course means higher corruption (not necessarily dropped per se) which causes the TCP/IP stack to have to retransmit packets more often. Reduction of bandwidth throughput aside, I got to wondering if it increases the actual bandwidth usage. That is, if there is a high error rate on the line causing packets to have to be retransmitted: Does this increase a bandwidth monitoring program’s numbers? Does the ISP count the retransmitted packets toward the monthly cap? Based on what I remember from my university networking courses and common sense, I have a feeling that the answer to both questions is yes, but I cannot reliably measure the first, and have no authoritative answer for the second. I’m wondering if maybe the retransmitted packets are acknowledged as being duplicates and thus not counted somewhere along the line.

  Read the article

• Postfix connection lost after AUTH

  - by user84104

  Looking at the logs on my mailservers, I have noticed messages like the following: Nov 29 12:09:38 mta postfix/smtpd[8362]: connect from unknown[183.13.165.14] Nov 29 12:09:39 mta postfix/smtpd[8362]: lost connection after AUTH from unknown[183.13.165.14] Nov 29 12:09:39 mta postfix/smtpd[8362]: disconnect from unknown[183.13.165.14] Nov 29 12:09:39 mta postfix/smtpd[8409]: connect from unknown[183.13.165.14] Nov 29 12:09:40 mta postfix/smtpd[8409]: lost connection after AUTH from unknown[183.13.165.14] Nov 29 12:09:40 mta postfix/smtpd[8409]: disconnect from unknown[183.13.165.14] There are no SASL failures in these cases. There are SASL failures are logged at other times, but never with lost connection after AUTH. What is happening here, and should I do any about it? These are not MXs, and already have smtpd_client_connection_rate_limit set. Possibly related: The systems require either SMTPS or STARTTLS before AUTH is announced.

  Read the article

• Tool/Program/Script/Formula for deciphering Active Directory Connection Strings for 3rd party user i

  - by I.T. Support

  We're using WSFTP, which has an Active Directory Integration module. To populate the user accounts you need to provide a connection string akin to: OU=Users,DC=domain,DC=com CN=Domain Users,OU=Users,DC=domain,DC=com Questions: Is there a Tool/Program/Script/Formula that allows me to decipher how these strings might look based on what I can see in Active Directory Users & Computers? Is there a proper/accepted name for these types of connection strings? I don't even know what to Google to get more information about how to format one properly How would I troubleshoot the connection string if I think it looks correctly formatted, but it isn't working? Thanks!

  Read the article

• Automatically connect to 3G dialup connection

  - by Philipp

  I have a notebook with an internal 3G modem (a HUAWEI Mobile Connect) which appears to the system as a dialup modem. When I want to connect to the Internet, I need to open the charms bar, click settings, network, the modem and "connect" to open the dialup dialog on the desktop. When the connection is interrupted for some reason, I need to repeat these steps. Is there a way to configure Windows 8 to automatically (and preferably silently in the background) connect with this modem at system startup and automatically restore the connection should it get interrupted? As an operating system which is developed for mobile devices, I would expect it to be able to somehow be able to manage a always-on 3g connection.

  Read the article

• automated printouts from a wireless printer

  - by Piotr

  I have a wireless printer which is always on, and an always on fanless linux server. Looking at the mprinter project on Kickstarter I started to wonder if there is an app somewhere in the internet already that will allow to prepare an automated daily printout based on some settings. things to be printed could include - weather forecast for my locations, todo`s scheduled for that day, a "quote of a day" or "word of the day", stats from google analytics for my site, and many more ... I would set a printout at 6:15 every work day so its on my printer when I am already up, having a coffee. anyone knows something that can be used for such purpose? While I know this can be done by combining the power of TeX, cron and a script language to manage the dynamic part of the PDF I believe this is a use case someone has already addressed.

  Read the article

• Automatically send a string when opening a raw connection in putty

  - by MBraedley

  I have a program running on a server that accepts TCP/IP connections on a specified port. When a connection is made, this program waits for the user (i.e. me) to send a string which identifies the type of user. Once the user identifies themselves, the program will start sending data that is relevant to that user type. I want to automate the first step and have putty automatically send the user identification string once the connection is made. I've been through the settings, and can't seem to find anything like "send following commands on connection". Any help would be appreciated.

  Read the article

• WDS (Wireless Distribution System) not work [migrated]

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

• WDS (Wireless Distribution System) not work

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

• SQL connection is too slow

  - by user66905

  We have a business web application in ASP.NET + SQL Server 2008. In the beginning, SQL Server and IIS were on the same machine. Now we bought another machine. Current configuration is IIS machine plus SQL Server machine, and they are connected by a 1gb LAN connection. With this configuration our web application is slower than before. Max bandwidth is 1-2% of network, about 15mbps. When we use another threads to the same SQL Server from the same IIS machine, network use is higher. So this is no problem with SQL Server. Ho we can make higher bandwidth for this SQL connection? Specs: .Net 3.5 SQL Server 2008 Standard file transfer can use 100% of LAN SQL connection by TCP/IP protocol SQL logins Pool tested with enable and

  Read the article

• why only google related sites load using wireless network

  - by gansai

  I have a wireless internet connection through BSNL. I have a windows 7 ultimate, and using latest Google chrome. During night time ie from 12:30 am onwards till around 5:30 am, I have the following problem: Only the following webpages load: Google Search Google images and all related to google product pages like you see them on the google home page. Blogspot webpages as supported through Google. Any other site loading gets stuck with the status message:- Waiting for www.thaturl.com .... And it goes on and on. Why does this happen? I checked around googling for this but no solution at all. By the way I tried changing my dns addresses too sometimes from automatically to opendns and then Google public dns. I need some solution which might help me to load other websites also. Thanks in advance.

  Read the article

• Apple Wireless (aluminium) Keyboard on Windows

  - by Dave Arkell

  I have an apple wireless keyboard which I am using with my windows pc and it works excellently, and looks superb. It all connects fine (particularly with a flashed dbt-120). However, I haven't had great success with getting all those useful keys to work with the 'fn' key. I've been using uawks as a way to get it working, but it doesn't always work. Has anyone had success with any other tools to get the fn key working (and therefore creating shortcuts to 'End', 'Home', 'Break', 'Pgup', etc? I should point out that this is not a mac computer, it is a plain old pc.

  Read the article

• Manually forcing TCP connection to retry

  - by Vi.

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

  Read the article

• Manually forcing TCP connection to retry

  - by Vi

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without now in GNU/Linux?

  Read the article

• Which interface defines the physical address of a Dialup connection

  - by Debabratta

  I use dial up connection to connect to the Internet. When I type ipconfig/all in the command prompt it shows me a physical address along with description for the dial up connection. The description field shows WAN(PPP/SLIP)Interface. I want to know upon which this physical address depends? It depends on my computer or ISP. On changing my ISP, physical address for this dialup connection will change or remain same? Please give some idea.

  Read the article

< Previous Page | 104 105 106 107 108 109 110 111 112 113 114 115  | Next Page >