Search Results

Search found 4708 results on 189 pages for '2005'.

Page 109/189 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• How to connect to local instance of SQL Server 2008 Express

  - by Billy Logan

  I just installed SQL Server 2008 Express on my windows 7 machine. I previously had 2005 on here and used it just fine with the old SQL Server Management Studio Express. I was able to connect with no problems to my PC-NAME\SQLEXPRESS instance. I uninstalled 2005 and SQL Server Management Studio Express. I then installed SQL Server 2008 Express on my machine and elected to have it install SQL Server Management Studio. Now, when I try to connect to PC-NAME\SQLEXPRESS (with Windows Authentication, like I always did), I get the following message: Cannot connect to PC-NAME\SQLEXPRESS. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 When I went to the help link it mentions, the help page suggests the following: * Make sure that the SQL Server Browser service is started on the server. * Use the SQL Server Surface Area Configuration tool to enable SQL Server to accept remote connections. For more information about the SQL Server Surface Area Configuration Tool, see Surface Area Configuration for Services and Connections. I did try starting the SQL Server Browser, but don't see that the Surface Area Configuration is installed with this express version. I had seen another user with an almost exact same issue that was missing the database engine on install. If that were the case how could i test for that and where would i go to download that install. Thanks in advance, Billy

  Read the article

• SQL Server Express backup/restore error: The Media Family on Device is Incorrectly Formed.

  - by Chris

  Basically, I'm having this issue: http://www.sqlcoffee.com/Troubleshooting047.htm What I'm doing is running a script I found online (http://pastebin.com/3n0ZfybL) to do a full backup, then rar'ing up the file and moving it to my computer. The CRC of the backup file inside the rar is correct on both computers, so there is no problem with data being corrupted when I transfer it. But then I go and try to restore the database on my dev computer here and I get the errors "sql server cannot process this media family" ... "msg 3013". Why is this happening? I'd test out the backup on the server I'm getting it from, but it's a production server. Edit: I was about to say how I wasn't doing anything stupid like trying to restore the database to an earlier version of SQL Server, but apparently I am: From: Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6002: Service Pack 2) To: Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 6.0 (Build 6001: Service Pack 1) Let me get back to this post after I reinstall this.

  Read the article

• SQL Server Installaion error 0x84B40000

  - by Kurtevich

  I have a problem installing SQL Server 2008 R2. Long time ago I had it installed, and then uninstalled. It was left in "Add/remove programs", but I didn't pay attention on that. I had 2005 installed. And now there is a need to install 2008. I removed 2005 and started installing 2008, but it says that space on C: is not enough. That's when I found out that "Add/remove programs" shows it occupying more than 4 gigabytes, though I used to uninstall it. So I click "Remove", it shows all those many screens and validations, shows that removal completed, but the size of Program Files folder is still more than 4 GB. I removed (from "Add\remove programs" everything that had "SQL Server" in it's name, but that main "SQL Server 2008" item is still there and still 4 GB and uninstalling does nothing. Because installation of SQL Server did not show existing instances, and I don't see any running services related to SQL server (well, almost any, more details in the end), I though that this folder contains just some leftover staff and data and deleted it manually. Then agreed to removing of the item in "Add/remove programs" and everything looks clean. Now every time I try to install SQL Server (even in the minimum configuration), I receive the following error: SQL Server Setup has encountered the following error: The specified credentials that were provided for the SQL Server service are not valid. To continue, provide a valid account and password for the SQL Server service. Error code 0x84B40000. What is this service mentioned here? This error looks like I'm trying to add features to existing server and it can't login. But the setup didn't ask me for any credentials, except one username that couldn't be changed. Here are the services shown that can be related, both disabled and pointing to non-existing executables: SQL Active Directory Helper Service SQL Full-text Filter Daemon Launcher (MSSQLSERVER) I understand that this must be because of my manual deletion, but is there a way to clean it up now?

  Read the article

• Installation Error on Windows Vista: "Side-by-Side configuration is incorrect"

  - by Maxim Z.

  NOTE: This is not a dupe of this other question. That question refers to a similar problem with 2 programs, while I'm only having it with 1, so the solution there doesn't apply to my situation. My relative asked me to install H&R Block 2009 on his Windows Vista 32-bit computer. I ran the installation program, which succeeded, but when I try to open the application itself, it gives me the following error: The application failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail. Here are the steps I've done so far to try and remedy this problem: In elevated command prompt, run the command: sfc /scannow Uninstall H&R Block 2009 Uninstall Microsoft Visual C++ 2005 Redistributable Reinstall Microsoft Visual C++ 2005 Redistributable by downloading from MSFT website Reinstall H&R Block 2009 This didn't fix it. I've searched for a long time and haven't found anything that works. The H&R Block site itself states that the way to fix this problem is to uninstall and reinstall H&R Block 2009. Has anyone run into this issue before? If so, how can I fix it? Thanks in advance.

  Read the article

• Referencing SQL Server 2008 R2 SMO from Visual Studio 2010

  - by user69508

  Hello. We read a number of things about referencing SQL Server SMO from Visual Studio but still don't have the definite answers we need. So, here it goes... A number of years ago we created a C# application using Visual Studio 2005 and SQL Server 2005. In that application, we added .NET references to a number of SQL Server SMO objects, and everything worked fine. Those references were: Microsoft.SqlServer.ConnectionInfo GAC 9.0.242.0 Microsoft.SqlServer.Smo GAC 9.0.242.0 Microsoft.SqlServer.SqlEnum GAC 9.0.242.0 We have now migrated to Visual Studio 2010 and SQL Server 2008 R2. However, when we try to reference those same SMO objects for SQL Server 2008 R2, they don't appear in the .NET references tab. We're wanting to reference the SQL Server 2008 R2 version of those same SMO assemblies for our upgraded C# application. On our development machines, we have SQL Server 2008 R2 Developer installed with all options, including the SDK such that the assemblies are found in C:\Program Files (x86)\Microsoft SQL Server\100\SDK\Assemblies. So, my first questions are: Are we supposed to do file references to the SMO assemblies instead of .NET references in Visual Studio 2010 w/ SQL Server 2008 R2? Or, is there some problem with our development machines such that the SMO assemblies are not appearing in the .NET references tab? Next, our production machines will have SQL Server 2008 R2 Workgroup installed with the client tools option selected, thus providing those same SMO assemblies in C:\Program Files (x86)\Microsoft SQL Server\100\SDK\Assemblies. So, the next questions are: When we release to production, are we supposed to redistribute the SMO assemblies with our application? Or, will our application work on the production servers without redistributing the SMO assemblies (since the client tools/SMO assemblies have been installed)? What else????? Thanks for the help!

  Read the article

• SQL transaction log backups conflicting with full backups?

  - by BradC

  On our SQL servers (2000, 2005, and 2008), we run full backups once a day in the evening, and transaction log backups every 2 hrs. We haven't really worried about these two processes conflicting, but lately we've run into some of the following issues: On one server, the trans log backup occasionally blocks the full backup, and must be manually stopped before the full backup can complete We sometimes end up with a massively-sized trans log backup file (sometimes larger than the full backup!) that seems to occur at the same time the full backup is running. I found a reference that indicate that these are "not allowed" to run at the same time, whatever that means: SQL 2000 Books Online and SQL 2005 Books Online. I'm not sure whether that means that the server will simply prevent them from running simultaneously, or if we ought to be explicitly stopping the log backups while the full backups are running. So are there known conflicts/issues between these? Does the answer differ between SQL versions? Should I have the trans log backup job check to see if the full backup is running before it executes? (and how do I do that...?)

  Read the article

• Current wisdom on SQL Server and Hyperthreading?

  - by BradC

  Lots of articles out there (see Slava Oks's original SQL 2000 article and Kevin Kline's SQL 2005 update) recommend disabling hyperthreading on SQL servers, or at least testing your specific workload before enabling it on your servers. This issue is gradually becoming less relevant as true multi-core processors replace hyperthreaded ones, but what's the current wisdom on this issue? Does this advice change any with SQL 2005 64-bit, or SQL 2008, or Windows Server 2008? Ideally, this should be tested in advance in a staging environment, but what about for servers that have already made it into production with HT enabled? How can I tell if performance issues we're experiencing might be related to HT? Is there some specific combination of perfmon counters that might point me in that direction, as opposed to all the other things I normally pursue when working on improving SQL performance? Edit: This is especially attractive because of the potential for an across the board improvement for some of my high-cpu servers, but the client is going to want to see something concrete that helps me identify which servers really could benefit from disabling hyperthreading. Of course, conventional performance troubleshooting is ongoing, but sometimes any little bit helps.

  Read the article

• How to set up Zabbix to monitor SQL Server Failover Active-Passive Cluster?

  - by Sebastian Zaklada

  It should be simple, so it is just most likely my approach being totally off and someone will hopefully prod me into the right direction. We have a Zabbix 2.0.3 server instance set up monitoring a bunch of different servers, but now we need to set it up to monitor and notify any alerts in regards to the SQL Server 2008 R2 Failover Active-Passive cluster. Essentially, this is a 2 servers cluster, when only one of its nodes can be "active" at a given time, serving all SQL Server related requests, while the other server just "sleeps" and from the point of anyone logged on on that server - has all of the SQL Server related services in stopped state. We have tried setting up Zabbix agents on both servers, using SQL Server 2005 templates (we could not find any 2008 specific ones and the 2005 ones always seemed to be working just fine for monitoring 2008 R2 instances) and configuring Zabbix server for both of the servers, but we end up having constant alerts for the server being currently the passive one in the cluster. We have been able to look up various methods of actually monitoring the failover, but we have not been able to find any guidance in regards to how to instruct Zabbix, that in this particular case, only one of the servers in the group is expected to be in the online state, while the other can be just discarded and should not raise any alerts. I hope I made myself clear. Thanks for any guidance. I am out of ideas.

  Read the article

• Visual Studio 2010 Beta 2, built-in font smoothing

  - by L. Shaydariv

  I've just installed Visual Studio 2010 Beta 2 onto my Windows XP to evaluate it and check whether it meets my preferences the way it did before. Okay, I've temporary defeated an urgent bug with a strange workaround (I could not open any file from the Solution Explorer), and it left bad memories to me. But however, it's okay. The first thing I've seen just opening the code editor was ClearType font rendering. Wow, so unexpectedly. I must note that I do not use standard Windows rendering techniques, but I still prefer GDI++, a font renderer developed by Japanese developers. (GDI++ allows to render the fonts in Mac/Win-Safari style over entire Windows.) Personally for me, GDI++ reaches the great font-rendering results allowing me to use the Dejavu Sans Mono font with really nice smoothing in Visual Studio 2008 (VS 2005 too, though VS 2005 crashes in this case). But GDI++ cannot affect Visual Studio 2010 Beta 2 text editor - it uses ClearType (right?), and it does not care about the system font smoothing settings. It could be an editor based on WPF, right? So as far as I can see, I can't use GDI++ anymore because it uses Windows GDI(+) but no WPF? So I've got several questions: Is it possible to disable VS 2010 b2 built-in ClearType or override it with another font smoother? Is it possible to install a Safari-like font renderer for Visual Studio 2010 [betas]? Thanks a lot.

  Read the article

• Why does Outlook 2007 lose connection to Exchange when Windows 7 64-bit turns off display?

  - by Greg R.

  The problem: When Windows 7 puts the display to sleep, Outlook 2007 and also Microsoft Office Communicator 2005 lose the connection to the Exchange server. When I unlock the computer, Outlook is logged out of Exchange and prompts me for credentials (although usually I have to restart Outlook to get it to reconnect). The network connection is still active, e.g. other applications don't lose their connection to the network or Internet when Windows 7 puts the display to sleep. I'm using a Dell E5400 notebook running Windows 7 Enterprise 64-bit with Outlook 2007 connecting to a corporate Exchange server (not sure if it's Exchange 2007 or 2010). The Dell is typically docked and connected via DVI (through the dock) to two Dell monitors. The Power Options in Windows 7 are set as follows: Turn Off The Display: 15 minutes Put The Computer To Sleep: never Those are the "Plugged In" settings but the problematic behavior is the same when running on battery. When Windows 7 turns off the display, it automatically locks the computer. E.g., I have to re-enter my credentials to access the machine. This is per corporate policy. The equivalent set up on my previous Dell notebook running Windows XP SP3 did not result in this problem with Outlook 2007 or Office Communicator 2005 connecting the very same exchange server. The problem began when I switched to the new Dell E5400 with Windows 7.

  Read the article

• starting oracle 10g on ubuntu, Listener failed to start.

  - by tsegay

  I have installed oracle 10g on a ubuntu 10.x, This is my first time installation. After installing I tried to start it with the command below. tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1/bin$ lsnrctl LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-DEC-2010 22:46:51 Copyright (c) 1991, 2005, Oracle. All rights reserved. Welcome to LSNRCTL, type "help" for information. LSNRCTL> start Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait... TNSLSNR for Linux: Version 10.2.0.1.0 - Production System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1))) TNS-12555: TNS:permission denied TNS-12560: TNS:protocol adapter error TNS-00525: Insufficient privilege for operation Linux Error: 1: Operation not permitted Listener failed to start. See the error message(s) above... my listener.ora file looks like this: # listener.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora # Generated by Oracle configuration tools. SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1) (PROGRAM = extproc) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) (ADDRESS = (PROTOCOL = TCP)(HOST = acct-vmserver)(PORT = 1521)) ) ) I can guess the problem is with permission issue, But i dont know where I have to do the change on permission. Any help is appreciated ... EDIT## When i run with the command sudo, i got this tsegay@server-name:/u01/app/oracle/product/10.2.0/db_1$ sudo ./bin/lsnrctl start LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-DEC-2010 01:01:03 Copyright (c) 1991, 2005, Oracle. All rights reserved. Starting ./bin/tnslsnr: please wait... ./bin/tnslsnr: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory TNS-12547: TNS:lost contact TNS-12560: TNS:protocol adapter error TNS-00517: Lost contact Linux Error: 32: Broken pipe

  Read the article

• ASP.NET Session State SQL Server 2008 R2 Freezes with High CPU Usage

  - by jtseng

  Our ASP.Net website uses SQL Server as the session state provider. We currently host the database on SQL Server 2005 since it does not play well on 2008 R2. We would like to know why, and how to fix it. hardware setup Our current session state server has SQL Server 2005 with the files hosted on a single local disk. It is one of our oldest servers since it has served us well, and we never felt the need to upgrade it. The database is about 2 GB holding 6000 sessions. (The sessions are a little big, but we need it.) We have another server with SQL Server 2008 R2 with a much faster CPU, much more RAM, and a much faster hard disk. situation One day, we have a huge surge in traffic. The transaction log growth on SQL Server freezes the server for 10's of seconds, allowing only a few requests through in minutes. So we load up the new server with ASPState with very large data and log files and point all of our applications to the new server. It chugs along fine for about 5 minutes, and then the CPU usage jumps up to 50% of the 16 cores that Standard Edition can use and freezes for 10's of seconds at a time. The files do not record any autogrowth events. The disk queue is nice and low. RAM usage is low. CPU usage on our old server has never been higher than 5%. What happened on the new server? Alternatively, I would like to hear success stories with ASP.NET session state server running on SQL Server 2008 R2 with an average write load of 30MB/sec with bursts up to 200MB/sec.

  Read the article

• Managing persistent data on an Amazon EC2 web server

  - by Derek

  I've just started trying out Amazon's EC2 service for running an asp.net web app which uses a SQL Server 2005 Express database. I have some questions about how to configure and operate it best for reliability, and I'm hoping to tap into some collective wisdom here as this is my first foray into EC2. Here's how I have it configured currently: OS: Windows 2003 SQL Server Express 2005 Web content stored on an EBS Volume (E Drive) Database Data stored on an EBS Volume (E Drive) Database backups to "C Drive" and then copied off to S3. Elastic IP Address attached to the production instance. Now when I make a change to the OS configuration, I make a new AMI using the bundle feature. Unfortunately, I found that this results in significant downtime. While the bundle is created and the new instance is started. It seems that when I'm ready to make a new AMI, I should: Start up a new temporary instance. Detach the EBS volume from the production instance. Detach the IP Address from the production instance. Attach the IP Address to the temporary instance. Attach the EBS volume to the temporary instance. Create an AMI from the production instance. After the production instance restarts, reverse the attach/detach steps to put it back in production. Is this the right order of events to prevent any chance to corrupt the EBS volume? Will the EBS volume become corrupt if I detach it while a database Write is taking place? Should I snapshot the EBS volume of the production instance and attach it to the temporary instance instead? Or could taking a snapshot of the EBS volume while it's in use cause corruption? Any suggestions to improve the reliability and operations?

  Read the article

• SQL Server Subscriber Migration

  - by SuperCoolMoss

  We're currently have one way transaction replication from a SQL Server 2005 OLTP publisher/distrbituor to two subscribers (one SQL 2005 and the other SQL2008 R2). Replication security is via the SQL Agents' domain service account (the same account is used on all boxes). The SQL2008R2 subscriber is used for BI purposes and hosts a database that has a subset of the Production publisher database tables, with different security and indexes. We need to migrate this BI subscriber to a newer box with more performant hardware. The plan is as follows: Stop replicating to the BI box (continue replicating to the other subscriber). Backup all databases on the BI box (including system databases). Restore all databases (including master in single user mode) to the new BI box (this has SQL Server 2008R2 already installed). Take the old BI box off the network and shut it down. Rename and Re-IP the new BI box to be the same as the old box. Switch replication back on. Are there any flaws in this approach?

  Read the article

• WSUS performance for unneeded updates

  - by mhouston100

  We have a WSUS server serving around 300 PC's and a couple of dozen servers and a discussion came up at work as to what products to include. We have a single SQL 2005 instance on one of the servers and it has NEVER been updated. My first thought was to just tick the box for SQL 2005 and let WSUS do it's thing to upgrade to the latest service pack at least. One of the other guys here has the opinion that having updates that are relevant to only a small selection of hosts would effect the performance of WSUS as a whole, claiming that each update does a 'check' against all the hosts or something similar. My argument is that manually updating these servers is obviously not working as the admins are not paying attention to what is needed. So my question is: Do updates that only effect a sub-set of the hosts effect the overall performance of the WSUS server in relation to ALL the hosts? (disk space is not an issue at this point) Is there any performance justification for or against manually updating small amounts of products? Basically I'm needing a rebuttal against his argument and I'm unable to find any concrete documentation to prove him wrong.

  Read the article

• When working with gems in Rails, what does 'cannot remove Object::ClassMethods' stem from?

  - by Matt

  Frequently I have run into a problem when installing gems that provides a problem like: Does anyone know what this stems from? I've seen in it several different cases, yet still haven't learned what exactly is causing it. $ sudo rake gems:install --trace (in /u/app/releases/20100213003957) ** Invoke gems:install (first_time) ** Invoke gems:base (first_time) ** Execute gems:base ** Invoke environment (first_time) ** Execute environment rake aborted! cannot remove Object::ClassMethods /u/app/releases/20100213003957/vendor/rails/activesupport/lib/active_support/dependencies.rb:603:in `remove_const' /u/app/releases/20100213003957/vendor/rails/activesupport/lib/active_support/dependencies.rb:603:in `remove_constant' /u/app/releases/20100213003957/vendor/rails/activesupport/lib/active_support/dependencies.rb:603:in `instance_eval' /u/app/releases/20100213003957/vendor/rails/activesupport/lib/active_support/dependencies.rb:603:in `remove_constant' /u/app/releases/20100213003957/vendor/rails/activesupport/lib/active_support/dependencies.rb:549:in `new_constants_in' /u/app/releases/20100213003957/vendor/rails/activesupport/lib/active_support/dependencies.rb:549:in `each' /u/app/releases/20100213003957/vendor/rails/activesupport/lib/active_support/dependencies.rb:549:in `new_constants_in' /u/app/releases/20100213003957/vendor/rails/activesupport/lib/active_support/dependencies.rb:156:in `require' /u/app/releases/20100213003957/vendor/rails/railties/lib/tasks/misc.rake:4 /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:617:in `call' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:617:in `execute' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:612:in `each' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:612:in `execute' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:578:in `invoke_with_call_chain' /usr/lib64/ruby/1.8/monitor.rb:242:in `synchronize' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:571:in `invoke_with_call_chain' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:564:in `invoke' /u/app/releases/20100213003957/vendor/rails/railties/lib/tasks/gems.rake:17 /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:617:in `call' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:617:in `execute' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:612:in `each' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:612:in `execute' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:578:in `invoke_with_call_chain' /usr/lib64/ruby/1.8/monitor.rb:242:in `synchronize' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:571:in `invoke_with_call_chain' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:588:in `invoke_prerequisites' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:585:in `each' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:585:in `invoke_prerequisites' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:577:in `invoke_with_call_chain' /usr/lib64/ruby/1.8/monitor.rb:242:in `synchronize' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:571:in `invoke_with_call_chain' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:564:in `invoke' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2027:in `invoke_task' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2005:in `top_level' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2005:in `each' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2005:in `top_level' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2044:in `standard_exception_handling' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:1999:in `top_level' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:1977:in `run' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:2044:in `standard_exception_handling' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/lib/rake.rb:1974:in `run' /usr/lib64/ruby/gems/1.8/gems/rake-0.8.4/bin/rake:31 /usr/bin/rake:19:in `load' /usr/bin/rake:19

  Read the article

• Using AChartEngine library for graphs, not able to get value for diffrent x-axis value

  - by kundan Chaudhary

  public static ArrayList<double[]> Value = new ArrayList<double[]>(); private double[] x = new double[10]; private double[] y = new double[10]; int counter = -1; add.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { counter++; x[counter] = Double.parseDouble(income_1.getText().toString()); y[counter] = Double.parseDouble(income_2.getText().toString()); income_1.setText(""); income_2.setText(""); } }); publish.setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { if (Value != null) { Value.add(x); Value.add(y); Intent intent = salesStackedBarChart.execute(BarChart.this, Value, counter); startActivity(intent); } } }); //and in SalesStackedBarChart.java class public Intent execute(Context context, ArrayList<double[]> values ,int counter) { int count = counter + 1; double fcount = counter + 1.5; String[] titles = new String[] { "Android", "iPhone" }; int[] colors = new int[] { Color.GREEN, Color.CYAN }; XYMultipleSeriesRenderer renderer = buildBarRenderer(colors); setChartSettings(renderer, "Yearly revenue in the last "+count+" years", "Years", "revenue in $", 0.5, fcount, 0, 24000, Color.GRAY, Color.LTGRAY); renderer.setXLabels(count); renderer.setYLabels(10); renderer.setDisplayChartValues(true); renderer.setXLabelsAlign(Align.LEFT); renderer.setYLabelsAlign(Align.LEFT); renderer.setZoomRate(1.1f); renderer.setBarSpacing(0.5); return ChartFactory.getBarChartIntent(context, buildBarDataset(titles, values), renderer, Type.DEFAULT); } // in AbstractDemoChart.java class protected XYMultipleSeriesDataset buildBarDataset(String[] titles, List<double[]> values) { XYMultipleSeriesDataset dataset = new XYMultipleSeriesDataset(); int length = titles.length; for (int i = 0; i < length; i++) { CategorySeries series = new CategorySeries(titles[i]); double[] v = values.get(i); int seriesLength = v.length; for (int k = 0; k < seriesLength; k++) { series.add(v[k]); } dataset.addSeries(series.toXYSeries()); } return dataset; } Run this project i get graph with x- axis value: 1,2,3,4,5.... But I want to print value: 2005,2006,2007,2008..... I changed in some code like: setChartSettings(renderer, "Yearly revenue in the last "+count+" years", "Years", "revenue in $", 2005, 2010, 0, 24000, Color.GRAY, Color.LTGRAY); and run project i get value of x-axis like: 2005,2006,2007.... but not get graph bar value. Values of all x-axis are null. How can I make this work?

  Read the article

• Java Refuses to Start - Could not reserve enough space for object heap

  - by Randyaa

  Background We have a pool of aproximately 20 linux blades. Some are running Suse, some are running Redhat. ALL share NAS space which contains the following 3 folders: /NAS/app/java - a symlink that points to an installation of a Java JDK. Currently version 1.5.0_10 /NAS/app/lib - a symlink that points to a version of our application. /NAS/data - directory where our output is written All our machines have 2 processors (hyperthreaded) with 4gb of physical memory and 4gb of swap space. We limit the number of 'jobs' each machine can process at a given time to 6 (this number likely needs to change, but that does not enter into the current problem so please ignore it for the time being). Some of our jobs set a Max Heap size of 512mb, some others reserve a Max Heap size of 2048mb. Again, we realize we could go over our available memory if 6 jobs started on the same machine with the heap size set to 2048, but to our knowledge this has not yet occurred. The Problem Once and a while a Job will fail immediately with the following message: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. We used to chalk this up to too many jobs running at the same time on the same machine. The problem happened infrequently enough (MAYBE once a month) that we'd just restart it and everything would be fine. The problem has recently gotten much worse. All of our jobs which request a max heap size of 2048m fail immediately almost every time and need to get restarted several times before completing. We've gone out to individual machines and tried executing them manually with the same result. Debugging It turns out that the problem only exists for our SuSE boxes. The reason it has been happening more frequently is becuase we've been adding more machines, and the new ones are SuSE. 'cat /proc/version' on the SuSE boxes give us: Linux version 2.6.5-7.244-bigsmp (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Mon Dec 12 18:32:25 UTC 2005 'cat /proc/version' on the RedHat boxes give us: Linux version 2.4.21-32.0.1.ELsmp ([email protected]) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-52)) #1 SMP Tue May 17 17:52:23 EDT 2005 'uname -a' gives us the following on BOTH types of machines: UTC 2005 i686 i686 i386 GNU/Linux No jobs are running on the machine, and no other processes are utilizing much memory. All of the processes currently running might be using 100mb total. 'top' currently shows the following: Mem: 4146528k total, 3536360k used, 610168k free, 132136k buffers Swap: 4194288k total, 0k used, 4194288k free, 3283908k cached 'vmstat' currently shows the following: procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 610292 132136 3283908 0 0 0 2 26 15 0 0 100 0 If we kick off a job with the following command line (Max Heap of 1850mb) it starts fine: java/bin/java -Xmx1850M -cp helloworld.jar HelloWorld Hello World If we bump up the max heap size to 1875mb it fails: java/bin/java -Xmx1875M -cp helloworld.jar HelloWorld Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. It's quite clear that the memory currently being used is for Buffering/Caching and that's why so little is being displayed as 'free'. What isn't clear is why there is a magical 1850mb line where anything higher means Java can't start. Any explanations would be greatly appreciated.

  Read the article

• Upgrading from TFS 2010 RC to TFS 2010 RTM done

  - by Martin Hinshelwood

  Today is the big day, with the Launch of Visual Studio 2010 already done in Asia, and rolling around the world towards us, we are getting ready for the RTM (Released). We have had TFS 2010 in Production for nearly 6 months and have had only minimal problems. Update 12th April 2010  – Added Scott Hanselman’s tweet about the MSDN download release time. SSW was the first company in the world outside of Microsoft to deploy Visual Studio 2010 Team Foundation Server to production, not once, but twice. I am hoping to make it 3 in a row, but with all the hype around the new version, and with it being a production release and not just a go-live, I think there will be a lot of competition. Developers: MSDN will be updated with #vs2010 downloads and details at 10am PST *today*! @shanselman - Scott Hanselman Same as before, we need to Uninstall 2010 RC and install 2010 RTM. The installer will take care of all the complexity of actually upgrading any schema changes. If you are upgrading from TFS 2008 to TFS2010 you can follow our Rules To Better TFS 2010 Migration and read my post on our successes.   We run TFS 2010 in a Hyper-V virtual environment, so we have the advantage of running a snapshot as well as taking a DB backup. Done - Snapshot the hyper-v server Microsoft does not support taking a snapshot of a running server, for very good reason, and Brian Harry wrote a post after my last upgrade with the reason why you should never snapshot a running server. Done - Uninstall Visual Studio Team Explorer 2010 RC You will need to uninstall all of the Visual Studio 2010 RC client bits that you have on the server. Done - Uninstall TFS 2010 RC Done - Install TFS 2010 RTM Done - Configure TFS 2010 RTM Pick the Upgrade option and point it at your existing “tfs_Configuration” database to load all of the existing settings Done - Upgrade the SharePoint Extensions Upgrade Build Servers (Pending) Test the server The back out plan, and you should always have one, is to restore the snapshot. Upgrading to Team Foundation Server 2010 – Done The first thing you need to do is off the TFS server and then log into the Hyper-v server and create a snapshot. Figure: Make sure you turn the server off and delete all old snapshots before you take a new one I noticed that the snapshot that was taken before the Beta 2 to RC upgrade was still there. You should really delete old snapshots before you create a new one, but in this case the SysAdmin (who is currently tucked up in bed) asked me not to. I guess he is worried about a developer messing up his server Turn your server on and wait for it to boot in anticipation of all the nice shiny RTM’ness that is coming next. The upgrade procedure for TFS2010 is to uninstal the old version and install the new one. Figure: Remove Visual Studio 2010 Team Foundation Server RC from the system.   Figure: Most of the heavy lifting is done by the Uninstaller, but make sure you have removed any of the client bits first. Specifically Visual Studio 2010 or Team Explorer 2010.  Once the uninstall is complete, this took around 5 minutes for me, you can begin the install of the RTM. Running the 64 bit OS will allow the application to use more than 2GB RAM, which while not common may be of use in heavy load situations. Figure: It is always recommended to install the 64bit version of a server application where possible. I do not think it is likely, with SharePoint 2010 and Exchange 2010  and even Windows Server 2008 R2 being 64 bit only, I do not think there will be another release of a server app that is 32bit. You then need to choose what it is you want to install. This depends on how you are running TFS and on how many servers. In our case we run TFS and the Team Foundation Build Service (controller only) on out TFS server along with Analysis services and Reporting Services. But our SharePoint server lives elsewhere. Figure: This always confuses people, but in reality it makes sense. Don’t install what you do not need. Every extra you install has an impact of performance. If you are integrating with SharePoint you will need to run this install on every Front end server in your farm and don’t forget to upgrade your Build servers and proxy servers later. Figure: Selecting only Team Foundation Server (TFS) and Team Foundation Build Services (TFBS)   It is worth noting that if you have a lot of builds kicking off, and hence a lot of get operations against your TFS server, you can use a proxy server to cache the source control on another server in between your TFS server and your build servers. Figure: Installing Microsoft .NET Framework 4 takes the most time. Figure: Now run Windows Update, and SSW Diagnostic to make sure all your bits and bobs are up to date. Note: SSW Diagnostic will check your Power Tools, Add-on’s, Check in Policies and other bits as well. Configure Team Foundation Server 2010 – Done Now you can configure the server. If you have no key you will need to pick “Install a Trial Licence”, but it is only £500, or free with a MSDN subscription. Anyway, if you pick Trial you get 90 days to get your key. Figure: You can pick trial and add your key later using the TFS Server Admin. Here is where the real choices happen. We are doing an Upgrade from a previous version, so I will pick Upgrade the same as all you folks that are using the RC or TFS 2008. Figure: The upgrade wizard takes your existing 2010 or 2008 databases and upgraded them to the release.   Once you have entered your database server name you can click “List available databases” and it will show what it can upgrade. Figure: Select your database from the list and at this point, make sure you have a valid backup. At this point you have not made ANY changes to the databases. At this point the configuration wizard will load configuration from your existing database if you have one. If you are upgrading TFS 2008 refer to Rules To Better TFS 2010 Migration. Mostly during the wizard the default values will suffice, but depending on the configuration you want you can pick different options. Figure: Set the application tier account and Authentication method to use. We use NTLM to keep things simple as we host our TFS server externally for our remote developers.  Figure: Setting your TFS server URL’s to be the remote URL’s allows the reports to be accessed without using VPN. Very handy for those remote developers. Figure: Detected the existing Warehouse no problem. Figure: Again we love green ticks. It gives us a warm fuzzy feeling. Figure: The username for connecting to Reporting services should be a domain account (if you are on a domain that is). Figure: Setup the SharePoint integration to connect to your external SharePoint server. You can take the option to connect later.   You then need to run all of your readiness checks. These check can save your life! it will check all of the settings that you have entered as well as checking all the external services are configures and running properly. There are two reasons that TFS 2010 is so easy and painless to install where previous version were not. Microsoft changes the install to two steps, Install and configuration. The second reason is that they have pulled out all of the stops in making the install run all the checks necessary to make sure that once you start the install that it will complete. if you find any errors I recommend that you report them on http://connect.microsoft.com so everyone can benefit from your misery.   Figure: Now we have everything setup the configuration wizard can do its work.  Figure: Took a while on the “Web site” stage for some point, but zipped though after that.  Figure: last wee bit. TFS Needs to do a little tinkering with the data to complete the upgrade. Figure: All upgraded. I am not worried about the yellow triangle as SharePoint was being a little silly Exception Message: TF254021: The account name or password that you specified is not valid. (type TfsAdminException) Exception Stack Trace:    at Microsoft.TeamFoundation.Management.Controls.WizardCommon.AccountSelectionControl.TestLogon(String connectionString)    at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) [Info   @16:10:16.307] Benign exception caught as part of verify: Exception Message: TF255329: The following site could not be accessed: http://projects.ssw.com.au/. The server that you specified did not return the expected response. Either you have not installed the Team Foundation Server Extensions for SharePoint Products on this server, or a firewall is blocking access to the specified site or the SharePoint Central Administration site. For more information, see the Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=161206). (type TeamFoundationServerException) Exception Stack Trace:    at Microsoft.TeamFoundation.Client.SharePoint.WssUtilities.VerifyTeamFoundationSharePointExtensions(ICredentials credentials, Uri url)    at Microsoft.TeamFoundation.Admin.VerifySharePointSitesUrl.Verify() Inner Exception Details: Exception Message: TF249064: The following Web service returned an response that is not valid: http://projects.ssw.com.au/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. Either the extensions are not installed, the request resulted in HTML being returned, or there is a problem with the URL. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://projects.ssw.com.au. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. (type TeamFoundationServerInvalidResponseException) Exception Data Dictionary: ResponseStatusCode = InternalServerError I’ll look at SharePoint after, probably the SharePoint box just needs a restart or a kick If there is a problem with SharePoint it will come out in testing, But I will definatly be passing this on to Microsoft.   Upgrading the SharePoint connector to TFS 2010 You will need to upgrade the Extensions for SharePoint Products and Technologies on all of your SharePoint farm front end servers. To do this uninstall  the TFS 2010 RC from it in the same way as the server, and then install just the RTM Extensions. Figure: Only install the SharePoint Extensions on your SharePoint front end servers. TFS 2010 supports both SharePoint 2007 and SharePoint 2010.   Figure: When you configure SharePoint it uploads all of the solutions and templates. Figure: Everything is uploaded Successfully. Figure: TFS even remembered the settings from the previous installation, fantastic.   Upgrading the Team Foundation Build Servers to TFS 2010 Just like on the SharePoint servers you will need to upgrade the Build Server to the RTM. Just uninstall TFS 2010 RC and then install only the Team Foundation Build Services component. Unlike on the SharePoint server you will probably have some version of Visual Studio installed. You will need to remove this as well. (Coming Soon) Connecting Visual Studio 2010 / 2008 / 2005 and Eclipse to TFS2010 If you have developers still on Visual Studio 2005 or 2008 you will need do download the respective compatibility pack: Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 If you are using Eclipse you can download the new Team Explorer Everywhere install for connecting to TFS. Get your developers to check that you have the latest version of your applications with SSW Diagnostic which will check for Service Packs and hot fixes to Visual Studio as well.   Technorati Tags: TFS,TFS2010,TFS 2010,Upgrade

  Read the article

• SQL Server and Hyper-V Dynamic Memory Part 2

  - by SQLOS Team

  Part 1 of this series was an introduction and overview of Hyper-V Dynamic Memory. This part looks at SQL Server memory management and how the SQL engine responds to changing OS memory conditions.   Part 2: SQL Server Memory Management As with any Windows process, sqlserver.exe has a virtual address space (VAS) of 4GB on 32-bit and 8TB in 64-bit editions. Pages in its VAS are mapped to pages in physical memory when the memory is committed and referenced for the first time. The collection of VAS pages that have been recently referenced is known as the Working Set. How and when SQL Server allocates virtual memory and grows its working set depends on the memory model it uses. SQL Server supports three basic memory models:   1. Conventional Memory Model   The Conventional model is the default SQL Server memory model and has the following properties: - Dynamic - can grow or shrink its working set in response to load and external (operating system) memory conditions. - OS uses 4K pages – (not to be confused with SQL Server “pages” which are 8K regions of committed memory).- Pageable - Can be paged out to disk by the operating system.   2. Locked Page Model The locked page memory model is set when SQL Server is started with "Lock Pages in Memory" privilege*. It has the following characteristics: - Dynamic - can grow or shrink its working set in the same way as the Conventional model.- OS uses 4K pages - Non-Pageable – When memory is committed it is locked in memory, meaning that it will remain backed by physical memory and will not be paged out by the operating system. A common misconception is to interpret "locked" as non-dynamic. A SQL Server instance using the locked page memory model will grow and shrink (allocate memory and release memory) in response to changing workload and OS memory conditions in the same way as it does with the conventional model.   This is an important consideration when we look at Hyper-V Dynamic Memory – “locked” memory works perfectly well with “dynamic” memory.   * Note in “Denali” (Standard Edition and above), and in SQL 2008 R2 64-bit (Enterprise and above editions) the Lock Pages in Memory privilege is all that is required to set this model. In 2008 R2 64-Bit standard edition it also requires trace flag 845 to be set, in 2008 R2 32-bit editions it requires sp_configure 'awe enabled' 1.   3. Large Page Model The Large page model is set using trace flag 834 and potentially offers a small performance boost for systems that are configured with large pages. It is characterized by: - Static - memory is allocated at startup and does not change. - OS uses large (>2MB) pages - Non-Pageable The large page model is supported with Hyper-V Dynamic Memory (and Hyper-V also supports large pages), but you get no benefit from using Dynamic Memory with this model since SQL Server memory does not grow or shrink. The rest of this article will focus on the locked and conventional SQL Server memory models.   When does SQL Server grow? For “dynamic” configurations (Conventional and Locked memory models), the sqlservr.exe process grows – allocates and commits memory from the OS – in response to a workload. As much memory is allocated as is required to optimally run the query and buffer data for future queries, subject to limitations imposed by:   - SQL Server max server memory setting. If this configuration option is set, the buffer pool is not allowed to grow to more than this value. In SQL Server 2008 this value represents single page allocations, and in “Denali” it represents any size page allocations and also managed CLR procedure allocations.   - Memory signals from OS. The operating system sets a signal on memory resource notification objects to indicate whether it has memory available or whether it is low on available memory. If there is only 32MB free for every 4GB of memory a low memory signal is set, which continues until 64MB/4GB is free. If there is 96MB/4GB free the operating system sets a high memory signal. SQL Server only allocates memory when the high memory signal is set.   To summarize, for SQL Server to grow you need three conditions: a workload, max server memory setting higher than the current allocation, high memory signals from the OS.    When does SQL Server shrink caches? SQL Server as a rule does not like to return memory to the OS, but it will shrink its caches in response to memory pressure. Memory pressure can be divided into “internal” and “external”.   - External memory pressure occurs when the operating system is running low on memory and low memory signals are set. The SQL Server Resource Monitor checks for low memory signals approximately every 5 seconds and it will attempt to free memory until the signals stop.   To free memory SQL Server does the following: ·         Frees unused memory. ·         Notifies Memory Manager Clients to release memory o   Caches – Free unreferenced cache objects. o   Buffer pool - Based on oldest access times.   The freed memory is released back to the operating system. This process continues until the low memory resource notifications stop.    - Internal memory pressure occurs when the size of different caches and allocations increase but the SQL Server process needs to keep its total memory within a target value. For example if max server memory is set and certain caches are growing large, it will cause SQL to free memory for re-use internally, but not to release memory back to the OS. If you lower the value of max server memory you will generate internal memory pressure that will cause SQL to release memory back to the OS.    Memory pressure handling has not changed much since SQL 2005 and it was described in detail in a blog post by Slava Oks.   Note that SQL Server Express is an exception to the above behavior. Unlike other editions it does not assume it is the most important process running on the system but tries to be more “desktop” friendly. It will empty its working set after a period of inactivity.   How does SQL Server respond to changing OS memory?    In SQL Server 2005 support for Hot-Add memory was introduced. This feature, available in Enterprise and above editions, allows the server to make use of any extra physical memory that was added after SQL Server started. Being able to add physical memory when the system is running is limited to specialized hardware, but with the Hyper-V Dynamic Memory feature, when new memory is allocated to a guest virtual machine, it looks like hot-add physical memory to the guest. What this means is that thanks to the hot-add memory feature, SQL Server 2005 and higher can dynamically grow if more “physical” memory is granted to a guest VM by Hyper-V dynamic memory.   SQL Server checks OS memory every second and dynamically adjusts its “target” (based on available OS memory and max server memory) accordingly.   In “Denali” Standard Edition will also have sqlserver.exe support for hot-add memory when running virtualized (i.e. detecting and acting on Hyper-V Dynamic Memory allocations).   How does a SQL Server workload in a guest VM impact Hyper-V dynamic memory scheduling?   When a SQL workload causes the sqlserver.exe process to grow its working set, the Hyper-V memory scheduler will detect memory pressure in the guest VM and add memory to it. SQL Server will then detect the extra memory and grow according to workload demand. In our tests we have seen this feedback process cause a guest VM to grow quickly in response to SQL workload - we are still working on characterizing this ramp-up.    How does SQL Server respond when Hyper-V removes memory from a guest VM through ballooning?   If pressure from other VM's cause Hyper-V Dynamic Memory to take memory away from a VM through ballooning (allocating memory with a virtual device driver and returning it to the host OS), Windows Memory Manager will page out unlocked portions of memory and signal low resource notification events. When SQL Server detects these events it will shrink memory until the low memory notifications stop (see cache shrinking description above).    This raises another question. Can we make SQL Server release memory more readily and hence behave more "dynamically" without compromising performance? In certain circumstances where the application workload is predictable it may be possible to have a job which varies "max server memory" according to need, lowering it when the engine is inactive and raising it before a period of activity. This would have limited applicaability but it is something we're looking into.   What Memory Management changes are there in SQL Server “Denali”?   In SQL Server “Denali” (aka SQL11) the Memory Manager has been re-written to be more efficient. The main changes are summarized in this post. An important change with respect to Hyper-V Dynamic Memory support is that now the max server memory setting includes any size page allocations and managed CLR procedure allocations it now represents a closer approximation to total sqlserver.exe memory usage. This makes it easier to calculate a value for max server memory, which becomes important when configuring virtual machines to work well with Hyper-V Dynamic Memory Startup and Maximum RAM settings.   Another important change is no more AWE or hot-add support for 32-bit edition. This means if you're running a 32-bit edition of Denali you're limited to a 4GB address space and will not be able to take advantage of dynamically added OS memory that wasn't present when SQL Server started (though Hyper-V Dynamic Memory is still a supported configuration).   In part 3 we’ll develop some best practices for configuring and using SQL Server with Dynamic Memory. Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #007

  - by pinaldave

  Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Find Stored Procedure Related to Table in Database – Search in All Stored Procedure In 2006 I wrote a small script which will help user  find all the Stored Procedures (SP) which are related to one or more specific tables. This was quite a popular script however, in SQL Server 2012 the same can be achieved using new DMV sys.sql-expression_dependencies. I recently blogged about it over Find Referenced or Referencing Object in SQL Server using sys.sql_expression_dependencies. 2007 SQL SERVER – Versions, CodeNames, Year of Release 1993 – SQL Server 4.21 for Windows NT 1995 – SQL Server 6.0, codenamed SQL95 1996 – SQL Server 6.5, codenamed Hydra 1999 – SQL Server 7.0, codenamed Sphinx 1999 – SQL Server 7.0 OLAP, codenamed Plato 2000 – SQL Server 2000 32-bit, codenamed Shiloh (version 8.0) 2003 – SQL Server 2000 64-bit, codenamed Liberty 2005 – SQL Server 2005, codenamed Yukon (version 9.0) 2008 – SQL Server 2008, codenamed Katmai (version 10.0) 2011 – SQL Server 2008, codenamed Denali (version 11.0) Search String in Stored Procedure Searching sting in the stored procedure is one of the most frequent task developer do. They might be searching for a table, view or any other details. I have written a script to do the same in SQL Server 2000 and SQL Server 2005. This is worth bookmarking blog post. There is an alternative way to do the same as well here is the example. 2008 SQL SERVER – Refresh Database Using T-SQL NO! Some of the questions have a single answer NO! You may want to read the question in the original blog post. I had a great time saying No! SQL SERVER – Delete Backup History – Cleanup Backup History SQL Server stores history of all the taken backup forever. History of all the backup is stored in the msdb database. Many times older history is no more required. Following Stored Procedure can be executed with a parameter which takes days of history to keep. In the following example 30 is passed to keep a history of month. 2009 Stored Procedure are Compiled on First Run – SP taking Longer to Run First Time Is stored procedure pre-compiled? Why the Stored Procedure takes a long time to run for the first time?  This is a very common questions often discussed by developers and DBAs. There is an absolutely definite answer but the question has been discussed forever. There is a misconception that stored procedures are pre-compiled. They are not pre-compiled, but compiled only during the first run. For every subsequent runs, it is for sure pre-compiled. Read the entire article for example and demonstration. Removing Key Lookup – Seek Predicate – Predicate – An Interesting Observation Related to Datatypes This is one of the most important performance tuning lesson on my blog. I suggest this weekend you spend time reading them and let me know what you think about the concepts which I have demonstrated in the four part series. Part 1 | Part 2 | Part 3 | Part 4 Seek Predicate is the operation that describes the b-tree portion of the Seek. Predicate is the operation that describes the additional filter using non-key columns. Based on the description, it is very clear that Seek Predicate is better than Predicate as it searches indexes whereas in Predicate, the search is on non-key columns – which implies that the search is on the data in page files itself. Policy Based Management – Create, Evaluate and Fix Policies This article will cover the most spectacular feature of SQL Server – Policy-based management and how the configuration of SQL Server with policy-based management architecture can make a powerful difference. Policy based management is loaded with several advantages. It can help you implement various policies for reliable configuration of the system. It also provides additional administration assistance to DBAs and helps them effortlessly manage various tasks of SQL Server across the enterprise. 2010 Recycle Error Log – Create New Log file without Server Restart Once I observed a DBA to restaring the SQL Server when he needed new error log file. This was funny and sad both at the same time. There is no need to restart the server to create a new log file or recycle the log file. You can run sp_cycle_errorlog and achieve the same result. Get Database Backup History for a Single Database Simple but effective script! Reducing CXPACKET Wait Stats for High Transactional Database The subject is very complex and I have done my best to simplify the concept. In simpler words, when a parallel operation is created for SQL Query, there are multiple threads for a single query. Each query deals with a different set of the data (or rows). Due to some reasons, one or more of the threads lag behind, creating the CXPACKET Wait Stat. Threads which came first have to wait for the slower thread to finish. The Wait by a specific completed thread is called CXPACKET Wait Stat. Information Related to DATETIME and DATETIME2 There are quite a lot of confusion with DATETIME and DATETIME2. DATETIME2 is also one of the underutilized datatype of SQL Server.  In this blog post I have written a follow up of the my earlier datetime series where I clarify a few of the concepts related to datetime. Difference Between GETDATE and SYSDATETIME Difference Between DATETIME and DATETIME2 – WITH GETDATE Difference Between DATETIME and DATETIME2 2011 Introduction to CUME_DIST – Analytic Functions Introduced in SQL Server 2012 SQL Server 2012 introduces new analytical function CUME_DIST(). This function provides cumulative distribution value. It will be very difficult to explain this in words so I will attempt small example to explain you this function. Instead of creating new table, I will be using AdventureWorks sample database as most of the developer uses that for experiment. Introduction to FIRST _VALUE and LAST_VALUE – Analytic Functions Introduced in SQL Server 2012 SQL Server 2012 introduces new analytical functions FIRST_VALUE() and LAST_VALUE(). This function returns first and last value from the list. It will be very difficult to explain this in words so I’d like to attempt to explain its function through a brief example. Instead of creating a new table, I will be using the AdventureWorks sample database as most developers use that for experiment purposes. OVER clause with FIRST _VALUE and LAST_VALUE – Analytic Functions Introduced in SQL Server 2012 – ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING “Don’t you think there is bug in your first example where FIRST_VALUE is remain same but the LAST_VALUE is changing every line. I think the LAST_VALUE should be the highest value in the windows or set of result.” Puzzle – Functions FIRST_VALUE and LAST_VALUE with OVER clause and ORDER BY You can see that row number 2, 3, 4, and 5 has same SalesOrderID = 43667. The FIRST_VALUE is 78 and LAST_VALUE is 77. Now if these function was working on maximum and minimum value they should have given answer as 77 and 80 respectively instead of 78 and 77. Also the value of FIRST_VALUE is greater than LAST_VALUE 77. Why? Explain in detail. Introduction to LEAD and LAG – Analytic Functions Introduced in SQL Server 2012 SQL Server 2012 introduces new analytical function LEAD() and LAG(). This functions accesses data from a subsequent row (for lead) and previous row (for lag) in the same result set without the use of a self-join . It will be very difficult to explain this in words so I will attempt small example to explain you this function. Instead of creating new table, I will be using AdventureWorks sample database as most of the developer uses that for experiment. A Real Story of Book Getting ‘Out of Stock’ to A 25% Discount Story Available Our book was out of stock in 48 hours of it was arrived in stock! We got call from the online store with a request for more copies within 12 hours. But we had printed only as many as we had sent them. There were no extra copies. We finally talked to the printer to get more copies. However, due to festivals and holidays the copies could not be shipped to the online retailer for two days. We knew for sure that they were going to be out of the book for 48 hours. This is the story of how we overcame that situation! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SQL SERVER – Server Side Paging in SQL Server 2011 Performance Comparison

  - by pinaldave

  Earlier, I have written about SQL SERVER – Server Side Paging in SQL Server 2011 – A Better Alternative. I got many emails asking for performance analysis of paging. Here is the quick analysis of it. The real challenge of paging is all the unnecessary IO reads from the database. Network traffic was one of the reasons why paging has become a very expensive operation. I have seen many legacy applications where a complete resultset is brought back to the application and paging has been done. As what you have read earlier, SQL Server 2011 offers a better alternative to an age-old solution. This article has been divided into two parts: Test 1: Performance Comparison of the Two Different Pages on SQL Server 2011 Method In this test, we will analyze the performance of the two different pages where one is at the beginning of the table and the other one is at its end. Test 2: Performance Comparison of the Two Different Pages Using CTE (Earlier Solution from SQL Server 2005/2008) and the New Method of SQL Server 2011 We will explore this in the next article. This article will tackle test 1 first. Test 1: Retrieving Page from two different locations of the table. Run the following T-SQL Script and compare the performance. SET STATISTICS IO ON; USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 5 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 12100 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO You will notice that when we are reading the page from the beginning of the table, the database pages read are much lower than when the page is read from the end of the table. This is very interesting as when the the OFFSET changes, PAGE IO is increased or decreased. In the normal case of the search engine, people usually read it from the first few pages, which means that IO will be increased as we go further in the higher parts of navigation. I am really impressed because using the new method of SQL Server 2011,  PAGE IO will be much lower when the first few pages are searched in the navigation. Test 2: Retrieving Page from two different locations of the table and comparing to earlier versions. In this test, we will compare the queries of the Test 1 with the earlier solution via Common Table Expression (CTE) which we utilized in SQL Server 2005 and SQL Server 2008. Test 2 A : Page early in the table -- Test with pages early in table USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 5 ;WITH CTE_SalesOrderDetail AS ( SELECT *, ROW_NUMBER() OVER( ORDER BY SalesOrderDetailID) AS RowNumber FROM Sales.SalesOrderDetail PC) SELECT * FROM CTE_SalesOrderDetail WHERE RowNumber >= @PageNumber*@RowsPerPage+1 AND RowNumber <= (@PageNumber+1)*@RowsPerPage ORDER BY SalesOrderDetailID GO SET STATISTICS IO ON; USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 5 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO Test 2 B : Page later in the table -- Test with pages later in table USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 12100 ;WITH CTE_SalesOrderDetail AS ( SELECT *, ROW_NUMBER() OVER( ORDER BY SalesOrderDetailID) AS RowNumber FROM Sales.SalesOrderDetail PC) SELECT * FROM CTE_SalesOrderDetail WHERE RowNumber >= @PageNumber*@RowsPerPage+1 AND RowNumber <= (@PageNumber+1)*@RowsPerPage ORDER BY SalesOrderDetailID GO SET STATISTICS IO ON; USE AdventureWorks2008R2 GO DECLARE @RowsPerPage INT = 10, @PageNumber INT = 12100 SELECT * FROM Sales.SalesOrderDetail ORDER BY SalesOrderDetailID OFFSET @PageNumber*@RowsPerPage ROWS FETCH NEXT 10 ROWS ONLY GO From the resultset, it is very clear that in the earlier case, the pages read in the solution are always much higher than the new technique introduced in SQL Server 2011 even if we don’t retrieve all the data to the screen. If you carefully look at both the comparisons, the PAGE IO is much lesser in the case of the new technique introduced in SQL Server 2011 when we read the page from the beginning of the table and when we read it from the end. I consider this as a big improvement as paging is one of the most used features for the most part of the application. The solution introduced in SQL Server 2011 is very elegant because it also improves the performance of the query and, at large, the database. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• TestDriven.Net 3.0 – All Systems Go

  - by Jamie Cansdale

  I’m pleased to announce that TestDriven.Net 3.0 is now available. Finally! I know many of you will already be using the Beta and RC versions, but if you look at the release notes you’ll see there’s been many refinements since then, so I highly recommend you install the RTM version. Here is a quick summary of a few new features: Visual Studio 2010 supports targeting multiple versions of the .NET framework (multi-targeting). This means you can easily upgrade your Visual Studio 2005/2008 solutions without necessarily converting them to use .NET 4.0. TestDriven.Net will execute your tests using the .NET version your test project is targeting (see ‘Properties > Application > Target framework’). There is now first class support for MSTest when using Visual Studio 2008 & 2010. Previous versions of TestDriven.Net had support for a limited number of MSTest attributes. This version supports virtually all MSTest unit testing related attributes, including support for deployment item and data driven test attributes. You should also find this test runner is quick. ;) There is a new ‘Go To Test/Code’ command on the code context menu. You can think of this as Ctrl-Tab for test driven developers; it will quickly flip back and forth between your tests and code under test. I recommend assigning a keyboard shortcut to the ‘TestDriven.NET.GoToTestOrCode’ command. NCover can now be used for code coverage on .NET 4.0. This is only officially supported since NCover 3.2 (your mileage may vary if you’re using the 1.5.8 version). Rather than clutter the ‘Output’ window, ignored or skipped tests will be placed on the ‘Task List’. You can double-click on these items to navigate to the offending test (or assign a keyboard shortcut to ‘View.NextTask’). If you’re using a Team, Premium or Ultimate edition of Visual Studio 2005-2010, a new ‘Test With > Performance’ command will be available. This command will perform instrumented performance profiling on your target code. A particular focus of this version has been to make it more keyboard friendly. Here’s a list of commands you will probably want to assign keyboard shortcuts to: Name Default What I use TestDriven.NET.RunTests Run tests in context   Alt + T TestDriven.NET.RerunTests Repeat test run   Alt + R TestDriven.NET.GoToTestOrCode Flip between tests and code   Alt + G TestDriven.NET.Debugger Run tests with debugger   Alt + D View.Output Show the ‘Output’ window Ctrl+ Alt + O   Edit.BreakLine Edit code in stack trace Enter   View.NextError Jump to next failed test Ctrl + Shift + F12   View.NextTask Jump to next skipped test   Alt + S   By default the ‘Output’ window will automatically activate when there is test output or a failed test (this is an option). The cursor will be positioned on the stack trace of the last failed test, ready for you to hit ‘Enter’ to jump to the fail point or ‘Esc’ to return to your source (assuming your ‘Output’ window is set to auto-hide).  If your ‘Output’ window isn’t set to auto-hide, you’ll need to hit ‘Ctrl + Alt + O’ then ‘Enter’. Alternatively you can use ‘Ctrl + Shift + F12’ (View.NextError) to navigate between all failed tests.   For more frequent updates or to give feedback, you can find me on twitter here. I hope you enjoy this version. Let me know how you get on. :)

  Read the article

• ASP.NET AJAX, jQuery and AJAX Control Toolkit&ndash;the roadmap

  - by Harish Ranganathan

  The opinions mentioned herein are solely mine and do not reflect those of my employer Wanted to post this for a long time but couldn’t.  I have been an ASP.NET Developer for quite sometime and have worked with version 1.1, 2.0, 3.5 as well as the latest 4.0. With ASP.NET 2.0 and Visual Studio 2005, came the era of AJAX and rich UI style web applications.  So, ASP.NET AJAX (codenamed “ATLAS”) was released almost an year later.  This was called as ASP.NET 2.0 AJAX Extensions.  This release was supported further with Visual Studio 2005 Service Pack 1. The initial release of ASP.NET AJAX had 3 components ASP.NET AJAX Library – Client library that is used internally by the server controls as well as scripts that can be used to write hand coded ajax style pages ASP.NET AJAX Extensions – Server controls i.e. ScriptManager,Proxy, UpdatePanel, UpdateProgress and Timer server controls.  Works pretty much like other server controls in terms of development and render client side behavior automatically AJAX Control Toolkit – Set of server controls that extend a behavior or a capability.  Ex.- AutoCompleteExtender The AJAX Control Toolkit was a separate download from CodePlex while the first two get installed when you install ASP.NET AJAX Extensions. With Visual Studio 2008, ASP.NET AJAX made its way into the runtime.  So one doesn’t need to separately install the AJAX Extensions.  However, the AJAX Control Toolkit still remained as a community project that can be downloaded from CodePlex.  By then, the toolkit had close to 30 controls. So, the approach was clear viz., client side programming using ASP.NET AJAX Library and server side model using built-in controls (UpdatePanel) and/or AJAX Control Toolkit. However, with Visual Studio 2008 Service Pack 1, we also added support for the ever increasing popular jQuery library.  That is, you can use jQuery along with ASP.NET and would also get intellisense for jQuery in Visual Studio 2008. Some of you who have played with Visual Studio 2010 Beta and .NET Framework 4 Beta, would also have explored the new AJAX Library which had a lot of templates, live bindings etc.,  But, overall, the road map ahead makes it much simplified. For client side programming using JavaScript for implementing AJAX in ASP.NET, the recommendation is to use jQuery which will be shipped along with Visual Studio and provides intellisense as well. For server side programming one you can use the server controls like UpdatePanel etc., and also the AJAX Control Toolkit which has close to 40 controls now.  The AJAX Control Toolkit still remains as a separate download at CodePlex.  You can download the different versions for different versions of ASP.NET at http://ajaxcontroltoolkit.codeplex.com/ The Microsoft AJAX Library will still be available through the CDN (Content Delivery Network) channels.  You can view the CDN resources at http://www.asp.net/ajaxlibrary/CDN.ashx Similarly even jQuery and the toolkit would be available as CDN resources in case you chose not to download and have them as a part of your application. I think this makes AJAX development pretty simple.  Earlier, having Microsoft AJAX Library as well as jQuery for client side scripting was kind of confusing on which one to use.  With this roadmap, it makes it simple and clear. You can read more on this at http://ajax.asp.net I hope this post provided some clarity on the AJAX roadmap as I could decipher from various product teams. Cheers!!!

  Read the article

• Something for the weekend - Whats the most complex query?

  - by simonsabin

  Whenever I teach about SQL Server performance tuning I try can get across the message that there is no such thing as a table. Does that sound odd, well it isn't, trust me. Rather than tables you need to consider structures. You have 1. Heaps 2. Indexes (b-trees) Some people split indexes in two, clustered and non-clustered, this I feel confuses the situation as people associate clustered indexes with sorting, but don't associate non clustered indexes with sorting, this is wrong. Clustered and non-clustered indexes are the same b-tree structure(and even more so with SQL 2005) with the leaf pages sorted in a linked list according to the keys of the index.. The difference is that non clustered indexes include in their structure either, the clustered key(s), or the row identifier for the row in the table (see http://sqlblog.com/blogs/kalen_delaney/archive/2008/03/16/nonclustered-index-keys.aspx for more details). Beyond that they are the same, they have key columns which are stored on the root and intermediary pages, and included columns which are on the leaf level. The reason this is important is that this is how the optimiser sees the world, this means it can use any of these structures to resolve your query. Even if your query only accesses one table, the optimiser can access multiple structures to get your results. One commonly sees this with a non-clustered index scan and then a key lookup (clustered index seek), but importantly it's not restricted to just using one non-clustered index and the clustered index or heap, and that's the challenge for the weekend. So the challenge for the weekend is to produce the most complex single table query. For those clever bods amongst you that are thinking, great I will just use lots of xquery functions, sorry these are the rules. 1. You have to use a table from AdventureWorks (2005 or 2008) 2. You can add whatever indexes you like, but you must document these 3. You cannot use XQuery, Spatial, HierarchyId, Full Text or any open rowset function. 4. You can only reference your table once, i..e a FROM clause with ONE table and no JOINs 5. No Sub queries. The aim of this is to show how the optimiser can use multiple structures to build the results of a query and to also highlight why the optimiser is doing that. How many structures can you get the optimiser to use? As an example create these two indexes on AdventureWorks2008 create index IX_Person_Person on Person.Person (lastName, FirstName,NameStyle,PersonType) create index IX_Person_Person on Person.Person(BusinessentityId,ModifiedDate)with drop_existing    select lastName, ModifiedDate   from Person.Person  where LastName = 'Smith' You will see that the optimiser has decided to not access the underlying clustered index of the table but to use two indexes above to resolve the query. This highlights how the optimiser considers all storage structures, clustered indexes, non clustered indexes and heaps when trying to resolve a query. So are you up to the challenge for the weekend to produce the most complex single table query? The prize is a pdf version of a popular SQL Server book, or a physical book if you live in the UK.  

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >