Search Results

Search found 3674 results on 147 pages for 'floppy drives'.

Page 109/147 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• Clean Install Windows on a Acer Aspire Laptop with a Hybrid Drive

  - by user1325179

  I'd like to do a clean install of Windows 8 on my Acer Aspire laptop (Aspire M5-481PT) with a hybrid drive. Physically, there seem to be two hard drives (an HDD and an SSD). So when I try to clean install Windows, I am asked to pick a drive. The HDD has five partitions (some seem to be recovery related), and the SSD has two partitions. Which partitions should I delete (if any), and onto which drive should I install Windows 8? And then how can I instruct Windows 8 to use the HDD-SSD combination as a hybrid drive? Edit: Currently, the operating system seems to be installed (from the factory) on the HDD. The SSD is invisible in File Explorer. It is only visible in disk utilities. I'm betting I need to install Windows to the HDD, and then point Windows to use the SSD for the hybrid relationship. Also, the SSD is about 20 GB. The HDD is about 450 GB.

  Read the article

• What is the best file system to use for a second hard drive when dual booting between WinXP and Win7

  - by Corey

  I am dual booting for legacy reasons, and I have a 2nd internal drive that I would like to use from both XP and 7. Should I go with the standard NTFS? (will the secuirty features be an issue, with different SIDs from the different users) Should I go with FAT32? Should I try out the new exFAT? Also, I curently have two of my 3 drives as "dynamic disks" and 1 spaned volume created on them. (i did this from XP) Win7 can see them/it fine. Is this an ok thing to do?

  Read the article

• Will an SSD help prevent laptop overheating?

  - by alex

  My laptop has a severe overheating problem, even though it's quite new (< 6 month). It's still regularly overheating to the point where it shuts down. This usually happens while playing games but sometimes while watching videos or using Skype video calls for a long time. I'm already keeping it mid-air on a cooling tray with 2 external coolers, but that doesn't seem to help. The only other thing I can think of is installing an SSD instead of the current HDD. I've read up that they generate less heat then hard drives, but can it actually make a serious difference to the heat level of the laptop? If there are any other suggestions, please feel free to comment. The laptop is a Toshiba Satellite L650D-11R.

  Read the article

• What is the procedure to replace a failing hard drive in a RAID array?

  - by slayton

  3 years ago a co-worker setup a software RAID-6 array on Ubuntu 9.04 and I'm getting messages from the OS that the drive has bad sectors and should be replaced. I'd like to remove this drive and replace it with a new drive, however, I have never done this before and I'm terrified that in the process of fixing the array I'm going to end up ruining it. I know the device ID of the array and I know the device IDs of the individual drives in the array. Additionally I physically have the bad drive. What are the steps to replace the bad drive with a new drive and get the array running again?

  Read the article

• Windows shows incorrect free space on Raid 10 volume

  - by Adenverd

  I have 4 1TB hard drives in RAID 1+0 configuration. Theoretically, I should have ~2TB of available space. Windows says the drive has a total size of 1.81 TB, which I'm fine with. As far as files on the volume go, I used WinDirStat to determine that I have 552.8GB of files on the volume. This means that I should have somewhere around 1.3TB minimum of free space. Yet Windows shows the drive as only having 492GB of free space. Are there hidden files somewhere that I can't see (I have show hidden files/folders turned on)? Does Windows not recognize that old files have been deleted? Is there any way to correct this problem?

  Read the article

• Do any of the HP printers have implement printer sharing?

  - by BCS

  I've seen several (home grade) HP prints that have network port and allow connecting to them via that. However I haven't seen any way to use it without installing the printer specific drives. This seems a bit silly because I've seen printer sharing system (SMB I think) that didn't seem to need any printer specific software. My question is: Is there a way to use one of these with my printers? (I'm omitting the exact model in the hopes that answers for several models (or a resource that answers it for several models) will be given.)

  Read the article

• External hard disk not showing up as removable media

  - by mark

  Windows 7 Pro x64, my external hard drive is a Western Digital Carviar Black. The hard drive is connected via USB (tried all my 2.0 and 3.0 ob my Gigabyte GA-X58A-UD7) but once I initialized it in the "disk management" (or whatever the proper term is; I'm using a German edition of Windows) I have to assign it a manual drive letter. Otherwise it doesn't show up. I'm confused because usually externally connected drives (be it USB sticks or real hard disks) just show up as "Removable media", but this one doesn't. Is this OK/expected? Will there be troubles when I go to another Windows computer? I formatted the drive with quick format and NTFS. I changed the permissions to have read/write for "Everyone" on that drive. thanks

  Read the article

• Restoring raid 5 array after bios flash

  - by cogergo

  I have just flashed my BIOS and now my machine does not detect my raid5 array! It has three 2TB drives in it so that is a LOT of data that will be lost! I have NOT deleted the array and it does not offer me to reboot I'm using Nvidia MediaShield! and Windows 7. Any ideas guys? Thanks! Update: here is the GUI raid configuration. As you see it shows one disk in the array but for some reason not the other two! Click for image of raid configuration error

  Read the article

• “BAD” partition showing up in Partition Manager

  - by Quintin Par

  I tried to partition my primary hard disk (NTFS partitions) with qtparted and got stuck in the process. Consequently I had to kill the process and exit my knoppix live CD boot up. Even though I was expecting XP to get corrupted, it booted fine and showed up all the drives accessible. But when I opened this with partition manager 8, it shows up as “BAD”. I ran chkdsk /f without any success. My objective with qparted and partition magic was to resize my existing partitions and add some space to c: How do I fix this problem and resize my partitions? Edit: Here's how my primary drive as per Windows is:

  Read the article

• Can i use a Windows 2008 r2 Cluster for file redundancy

  - by JERiv

  I'm researching a sever clustering architecture as a redundancy and backup solution for a client, and something that isn't made clear is whether or not i can use server clustering to replace a file server with backup solution. Forgive my Elementary understanding of server clustering but supposing: 2 Sites (NJ, CA) Identical Servers at each site setup as a Remote Site Cluster nodes with Windows Enterprise server 2008 r2 Services: File, Terminal, AD, and maybe DNS Will the following will be true: Files (including data drives) will be synced between the two servers eliminating the need for third party backup/mirroring software to sync/backup files. Also supposing i use roaming profiles w/ folder redirection; How will client computer in the WAN access their data through the cluster (i.e. will they automatically choose the best route)

  Read the article

• WUBI installation wiped hard-drive?

  - by gkaykck

  Here is what happened, i ve installed xubuntu via wubi on my D: drive. I have 2 drives by the way C: and D: Basically i use C: drive for windows and D drive for rest and backup as everybody does. And i installed my WUBI installation on drive D: too. Than i tried to do a little extreme thing. Which is basically i tried to make a shortcut to D: folder within Xubuntu. The problem is suddenly all my files disappeared. Folders stayed same, but files disappeared. Also the drive have the files, i know because it is still full, but the thing is i cannot see any of my files. I tried checking for errors and some basic data recovery which didn't worked at all Any help?

  Read the article

• can power supply affect I/O

  - by user101289

  I have a dev server machine running Ubuntu 12.04. For a long while it's been throwing intermittent errors where it would suddenly tell me "File system is read only" or drop into a GRUB error console on boot. I've done disk checks, bad blocks, etc. and no real problems with the main SATA drive were detected. Finally the drive would not be detected at all-- but neither would other drives I plugged in (via SATA). I plugged the supposedly "bad" drive into another server and it worked fine, no issues, for days-- so I assumed the motherboard had a bad SATA controller, and replaced the motherboard with an identical model. I replaced the drive into the original machine with the new motherboard, rebooted-- and the same issues-- I/O errors, failure to read the drive at all, dropping into GRUB, etc. I'm wondering if there could be some other issue with this machine, that's not related to the drive-- possibly power supply? Thanks for ideas

  Read the article

• Harddrive speed drops a lot!

  - by AZ

  The hard drive is used to do BT with uTorrent. Recently uTorrent began to report there is a "I/O Device error", then I use HD Tune to test it, it turns out the transfer rate is only 16 MB/sec. At the same time, I have a similar hard drive tested, it rates as 120 MB/sec. They are both 7200rpm desktop hard drives. I used chkdsk to fix it but the rate didn't change. Is this a symptom of hard drive failure? Should I backup the content on the disk ASAP or is there any other tool can fix it or diagnosis it?`

  Read the article

• Has anybody tried to create a really big storage with ZFS and plain SAS controllers? [closed]

  - by Eccehomo

  I'm considering to build one with something like this: http://www.supermicro.com/products/chassis/4U/847/SC847E26-R1400U.cfm (a chasis with two dual port multipath expanders) http://www.supermicro.com/products/accessories/addon/AOC-SAS2LP-MV8.cfm (4 8-port plain SAS controllers, 2 for each backplane) and 36 Seagate 3Tb SAS drives (ST33000650SS) OS -- FreeBSD. And it's very interesting: How good expander sas backplanes and multipath configurations work with freebsd ? How to locate a specific drive in the bay? (literally -- how to blink an indicator on the drive in freebsd) How to detect a fail of a controller? Will it work together at all? I'm asking to share any experience.

  Read the article

• A script so that you don't forget your usb drive on a public computer

  - by Ava Gailliot

  So I have a problem because I'm an idiot. I seem to always leave my usb drives in public computers at school and the like. I unmount them and log off leaving them still in the pc, and of course I then lose my information and my drive which can be costly. Is there a small script somewhere that I can install to my drive that prompts me to take out my usb stick when I log off of a computer? Since this is mostly for use with public computers I can't put anything on my drive that will later need some sort of admin permissions. I guess if all else fails I'll probably put my drive on a lanyard and keep it around my wrist. lol. Does anyone else have this problem?

  Read the article

• Is there good FAT driver for FUSE? (Lightweight, not mountlo)

  - by Vi.

  FUSE filesystem list show some FuseFat and FatFuse. Both are old, FatFuse is read-only , FuseFat is non-buildable and probably depends on glib. Now I'm using mountlo for the task (mounting USB drives in generic way without root access or suid things (except of fusermount itself)), but it looks too big for such task. Using FUSE to mount external storage devices is good both for security and for flexibility reason: the kernel sees only block reads and writes while actual code that deals with filesystem details runs with user privileges, allowing user to use custom filesystems and preventing from kernel filesystem exploits. Is there good vfat FUSE driver?

  Read the article

• Windows 7 won't recognize my second hard drive after reinstall

  - by Shadur

  I recently suffered a total hardware crash on my windows C: drive. Fortunately, I had a spare disk on hand and set about reinstalling. For some reason, during the install it decided to declare my second windows drive as the booting drive, but once the installation was completed it completely and utterly refuses to acknowledge the filesystem -- I'm not even seeing a drive letter, while it /does/ find the linux partitions on the other two drives (even if it can't read any of them). My first (and most important) question: How can I get windows to re-acknowledge the drive, preferably without losing all the data on it? My second question: How can I tell windows to set up its boot loader on the new C: drive?

  Read the article

• Windows boot manager and two hard disks

  - by Pincopallino

  here's my situation: I had an HDD with Windows 8 installed (UEFI mode). I bought a SSD and wanted to do a clean install of Windows, so I thought that disabling the HDD and leaving the SSD as the only drive when installing was the right procedure to install the boot manager on the SSD. Unfortunately, after I plugged the HDD back in, the computer won't boot unless I select from the BIOS directly the SSD as the boot device. I guess the problem is that I have two Windows Boot Managers on two separate drives and they conflict. How would I solve this problem (excluding a format of the HDD, because I need to access data on the old Windows partition and, ideally, I would like to be able to boot that partition)?

  Read the article

• How to remove a drive from a 2-drive RAID 5 array?

  - by DrSAR

  There is some information available on shape changes in RAID arrays but I'm a little nervous and would like confirmation: Problem: I have 2 500GB drive as software raid 5 (mdadm). I would like to free one of the two drives since RAID-redundancy is for wimps... Can I just mdadm --grow --array-size=1 followed by a mdadm --grow --raid-disks 1? This seems too simple. How would I specify which drive gets freed? Part of the reason for this maneuver is that I don't have additional space to run a backup.

  Read the article

• How can I keep the Windows 8 virtual keyboard from popping up?

  - by orbfish

  I am the unwilling recipient of Windows 8. Lenovo couldn't fix the new Windows 7 Ultrabook I bought, so they sent me a Yoga laptop, with touch-screen and Windows 8. Once I bought a start menu replacement, I don't mind Windows 8 too much - it's ugly, but most things work as well as Windows 7. But the thing that drives me crazy, endlessly, is the virtual keyboard popping up when I'm trying to do something else (well, just about anytime, since I almost never use it to type). It's like a giant Clippy that covers half the screen. I haven't figured out what causes it to pop up. It seems pretty random, and sometimes it goes away before I can even reach for the escape key. Sometimes it comes up when I'm typing, sometimes when my hands are nowhere near the keyboard. Sometimes several times a minute, sometimes not for hours. Any suggestions?

  Read the article

• What do desktop users use SSD for? [closed]

  - by Continuation

  I keep hearing people say how much faster their desktops/laptops are after switching to SSD. But then when I ask them what do they use SSD for, the answers are always "booting". Not trying to start a flame war here. I use SSD for my database server and it makes a huge difference. A single SSD can replace a 10 drives RAID 10 and is actually both much faster and MUCH CHEAPER. But I just can't think of a usecase for desktops where SSD could make a similar impact. Sure it's kinda nice to cut boot time down from 40 seconds to 10 seconds. But is it that big a deal? Would love to hear how SSD improves your desktop performance.

  Read the article

• New Kingson SSD drive fails after 1 week

  - by user35356

  I upgraded the hard disk in my notebook to a 128GB Kingston SSD V100. Everything worked fine for about a week then out of the blue the notebook would not boot up any more. A black dos-like screen was shown with the options to try and boot normally or attempt to repair windows. Neither option would do anything. When I removed the drive and tested it in an external usb case no other computers are able to access the drive either. Is there anything I can try to fix it myself? The drive is partitioned into three drives and when it's connected through an external usb case to another computer I can see the partitions, just can't access anything on them. Does this mean the drive might be recoverable?

  Read the article

• HP DL380 Losing Drive Array

  - by jidl

  I have an HP Proliant DG380 G7 dropping one of it's arrays every hour, on the hour, for 2-5 minutes. The OS is SBS 2011 Standard, the servers runs Exchange, DC, files & Trend WFBS 8. I can watch the D Drive disappear for the duration of the problem - then it just comes back up and all is well again. There is no loss of network connectivity, although the mapped drives also disappear. We thought it might be to do with Sharepoint / VSS writers failing but it looks as though this is a symptom rather than cause. It survives a reboot. Any ideas as to what could be running on a regular schedule like this?

  Read the article

• Using windows 7 and fedora

  - by vedant1811

  I need to partition my hard disk for windows and fedora (root, swap, users). I thought of creating 3 (primary drives). 2 small ones (~5GB) each for win7 and fedora and a large (~700GB) for common files (pictures, vidoes, documents, etc.) one. Please Tell me which file systems to use in each case and the set-up of primary and extended partitions. Also I want to know, where and on which file system should the Linux Grub (my choice of OS chooser) be installed. I have just a bought a new Asus K53S and using the Fedora Installer Partitioner (Anaconda). Your help is greatly appreciated.

  Read the article

• RAID 0 disk failure, how to recover the RAID?

  - by user7985

  Situation is this. A PC with 2 hard disks, in an RAID 0 Array. The electronics on one of the disks has failed. I can not find the same board for the disk (I've tried this, removed board from the OK disk, and the second, the damaged one, works fine). I've made an image with "dd" on linux on a new hard drive (same size, not same model) and now I get "Offline member" in the RAID config screen. Will I succeed to recover the data which is stored on the drives, any help, any experience with this kind of problem. And surly, I know it was stupid to put the disks in RAID 0 and store data on them :(

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >