Search Results

Search found 3567 results on 143 pages for 'instructions'.

Page 109/143 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• Active Directory and Apple's Workgroup Manager

  - by qbn

  I thought I'd share my experiences here. I work for a small business with only ~20 users. I wanted the ability to use managed client preferences to assign things like the software update server. Basically the ability to manage my Macs easily and in a native way. At first I tried the magic triangle solution, but I found this to be very complicated. Not only does it require a Mac OS X Server, but it gives you two points of failure. Additionally each Mac workstation must be bound to both servers. Eventually I sucked it up and went with the schema changes documented here. I was hesitant at first, because the instructions require a lot of manual work. However it was fairly basic and only took me about an hour and a half. Below you'll find the schema changes file that was a result of my work. I followed the instructions exactly and double checked everything, after six months of having this in place things have been running great. Too good to not share. I hope I save someone a couple of hours. # ================================================================== # # This file should be imported with the following command: # ldifde -i -u -f Apple AD Schema Changes.ldf -s server:port -b username domain password -j . -c "cn=Configuration,dc=X" #configurationNamingContext # LDIFDE.EXE from AD/AM V1.0 or above must be used. # This LDIF file should be imported into AD or AD/AM. It may not work for other directories. # # ================================================================== # ================================================================== # Attributes # ================================================================== # Attribute: apple-category dn: cn=apple-category,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.10.4 ldapDisplayName: apple-category attributeSyntax: 2.5.5.12 adminDescription: Category for the computer or neighborhood oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computeralias dn: cn=apple-computeralias,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.3 ldapDisplayName: apple-computeralias attributeSyntax: 2.5.5.12 adminDescription: XML plist referring to a computer record oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computer-list-groups dn: cn=apple-computer-list-groups,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.11.4 ldapDisplayName: apple-computer-list-groups attributeSyntax: 2.5.5.12 adminDescription: groups oMSyntax: 64 systemOnly: FALSE # Attribute: apple-computers dn: cn=apple-computers,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.11.3 ldapDisplayName: apple-computers attributeSyntax: 2.5.5.12 adminDescription: computers oMSyntax: 64 systemOnly: FALSE # Attribute: apple-data-stamp dn: cn=apple-data-stamp,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.12.2 ldapDisplayName: apple-data-stamp attributeSyntax: 2.5.5.5 adminDescription: data stamp oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-dns-domain dn: cn=apple-dns-domain,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.18.1 ldapDisplayName: apple-dns-domain attributeSyntax: 2.5.5.12 adminDescription: DNS domain oMSyntax: 64 systemOnly: FALSE # Attribute: apple-dnsname dn: cn=apple-dnsname,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.4 ldapDisplayName: apple-dnsname attributeSyntax: 2.5.5.12 adminDescription: DNS name oMSyntax: 64 systemOnly: FALSE # Attribute: apple-dns-nameserver dn: cn=apple-dns-nameserver,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.18.2 ldapDisplayName: apple-dns-nameserver attributeSyntax: 2.5.5.12 adminDescription: DNS name server list oMSyntax: 64 systemOnly: FALSE # Attribute: apple-group-homeowner dn: cn=apple-group-homeowner,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.14.2 ldapDisplayName: apple-group-homeowner attributeSyntax: 2.5.5.5 adminDescription: group home owner settings oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-group-homeurl dn: cn=apple-group-homeurl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.14.1 ldapDisplayName: apple-group-homeurl attributeSyntax: 2.5.5.5 adminDescription: group home url oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-imhandle dn: cn=apple-imhandle,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.21 ldapDisplayName: apple-imhandle attributeSyntax: 2.5.5.12 adminDescription: IM handle (service:account name) oMSyntax: 64 systemOnly: FALSE # Attribute: apple-keyword dn: cn=apple-keyword,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.19 ldapDisplayName: apple-keyword attributeSyntax: 2.5.5.12 adminDescription: keywords oMSyntax: 64 systemOnly: FALSE # Attribute: apple-mcxflags dn: cn=apple-mcxflags,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.10 ldapDisplayName: apple-mcxflags attributeSyntax: 2.5.5.12 adminDescription: mcx flags oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-mcxsettings dn: cn=apple-mcxsettings,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.16 ldapDisplayName: apple-mcxsettings attributeSyntax: 2.5.5.12 adminDescription: mcx settings oMSyntax: 64 systemOnly: FALSE # Attribute: apple-neighborhoodalias dn: cn=apple-neighborhoodalias,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.2 ldapDisplayName: apple-neighborhoodalias attributeSyntax: 2.5.5.12 adminDescription: XML plist referring to another neighborhood record oMSyntax: 64 systemOnly: FALSE # Attribute: apple-networkview dn: cn=apple-networkview,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.10.3 ldapDisplayName: apple-networkview attributeSyntax: 2.5.5.12 adminDescription: Network view for the computer oMSyntax: 64 systemOnly: FALSE # Attribute: apple-nodepathxml dn: cn=apple-nodepathxml,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.20.1 ldapDisplayName: apple-nodepathxml attributeSyntax: 2.5.5.12 adminDescription: XML plist of directory node path oMSyntax: 64 systemOnly: FALSE # Attribute: apple-service-location dn: cn=apple-service-location,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.5 ldapDisplayName: apple-service-location attributeSyntax: 2.5.5.12 adminDescription: Service location oMSyntax: 64 systemOnly: FALSE # Attribute: apple-service-port dn: cn=apple-service-port,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.3 ldapDisplayName: apple-service-port attributeSyntax: 2.5.5.9 adminDescription: Service port number oMSyntax: 2 systemOnly: FALSE # Attribute: apple-service-type dn: cn=apple-service-type,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.1 ldapDisplayName: apple-service-type attributeSyntax: 2.5.5.5 adminDescription: type of service oMSyntax: 22 systemOnly: FALSE # Attribute: apple-service-url dn: cn=apple-service-url,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.19.2 ldapDisplayName: apple-service-url attributeSyntax: 2.5.5.5 adminDescription: URL of service oMSyntax: 22 systemOnly: FALSE # Attribute: apple-user-authenticationhint dn: cn=apple-user-authenticationhint,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.15 ldapDisplayName: apple-user-authenticationhint attributeSyntax: 2.5.5.12 adminDescription: password hint oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-class dn: cn=apple-user-class,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.7 ldapDisplayName: apple-user-class attributeSyntax: 2.5.5.5 adminDescription: user class oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homequota dn: cn=apple-user-homequota,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.8 ldapDisplayName: apple-user-homequota attributeSyntax: 2.5.5.5 adminDescription: home directory quota oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homesoftquota dn: cn=apple-user-homesoftquota,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.17 ldapDisplayName: apple-user-homesoftquota attributeSyntax: 2.5.5.5 adminDescription: home directory soft quota oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-homeurl dn: cn=apple-user-homeurl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.6 ldapDisplayName: apple-user-homeurl attributeSyntax: 2.5.5.5 adminDescription: home directory URL oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-mailattribute dn: cn=apple-user-mailattribute,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.9 ldapDisplayName: apple-user-mailattribute attributeSyntax: 2.5.5.12 adminDescription: mail attribute oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-picture dn: cn=apple-user-picture,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.12 ldapDisplayName: apple-user-picture attributeSyntax: 2.5.5.12 adminDescription: picture oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-user-printattribute dn: cn=apple-user-printattribute,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.13 ldapDisplayName: apple-user-printattribute attributeSyntax: 2.5.5.12 adminDescription: print attribute oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-webloguri dn: cn=apple-webloguri,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.1.22 ldapDisplayName: apple-webloguri attributeSyntax: 2.5.5.12 adminDescription: Weblog URI oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: apple-xmlplist dn: cn=apple-xmlplist,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.17.1 ldapDisplayName: apple-xmlplist attributeSyntax: 2.5.5.12 adminDescription: XML plist data oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: ipHostNumber dn: cn=ipHostNumber,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.1.1.1.19 ldapDisplayName: ipHostNumber attributeSyntax: 2.5.5.5 adminDescription: IP address oMSyntax: 22 systemOnly: FALSE rangeUpper: 128 # Attribute: macAddress dn: cn=macAddress,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.1.1.1.22 ldapDisplayName: macAddress attributeSyntax: 2.5.5.5 adminDescription: MAC address oMSyntax: 22 systemOnly: FALSE rangeUpper: 128 # Attribute: mountDirectory dn: cn=apple-mountDirectory,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.1 ldapDisplayName: mountDirectory attributeSyntax: 2.5.5.12 adminDescription: mount path oMSyntax: 64 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountDumpFrequency dn: cn=apple-mountDumpFrequency,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.4 ldapDisplayName: mountDumpFrequency attributeSyntax: 2.5.5.5 adminDescription: mount dump frequency oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountOption dn: cn=apple-mountOption,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.3 ldapDisplayName: mountOption attributeSyntax: 2.5.5.5 adminDescription: mount options oMSyntax: 22 systemOnly: FALSE # Attribute: mountPassNo dn: cn=apple-mountPassNo,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.5 ldapDisplayName: mountPassNo attributeSyntax: 2.5.5.5 adminDescription: mount passno oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: mountType dn: cn=apple-mountType,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.63.1000.1.1.1.8.2 ldapDisplayName: mountType attributeSyntax: 2.5.5.5 adminDescription: mount VFS type oMSyntax: 22 isSingleValued: TRUE systemOnly: FALSE # Attribute: ttl dn: cn=ttl,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: attributeSchema attributeId: 1.3.6.1.4.1.250.1.60 ldapDisplayName: ttl attributeSyntax: 2.5.5.9 oMSyntax: 2 isSingleValued: TRUE systemOnly: FALSE dn: changetype: modify add: schemaUpdateNow schemaUpdateNow: 1 - # ================================================================== # Classes # ================================================================== # Class: apple-computer dn: cn=apple-computer,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.10 ldapDisplayName: apple-computer adminDescription: computer objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-category mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.4 # mayContain: apple-computer-list-groups mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.4 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-networkview mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.3 # mayContain: apple-service-url mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.2 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: macAddress mayContain: 1.3.6.1.1.1.1.22 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 # Class: apple-computer-list dn: cn=apple-computer-list,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.11 ldapDisplayName: apple-computer-list adminDescription: computer list objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-computer-list-groups mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.4 # mayContain: apple-computers mayContain: 1.3.6.1.4.1.63.1000.1.1.1.11.3 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-configuration dn: cn=apple-configuration,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.12 ldapDisplayName: apple-configuration adminDescription: configuration objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-data-stamp mayContain: 1.3.6.1.4.1.63.1000.1.1.1.12.2 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-group dn: cn=apple-group,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.14 ldapDisplayName: apple-group adminDescription: group account objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-group-homeowner mayContain: 1.3.6.1.4.1.63.1000.1.1.1.14.2 # mayContain: apple-group-homeurl mayContain: 1.3.6.1.4.1.63.1000.1.1.1.14.1 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-user-picture mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.12 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 # Class: apple-location dn: cn=apple-location,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.18 ldapDisplayName: apple-location objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-dns-domain mayContain: 1.3.6.1.4.1.63.1000.1.1.1.18.1 # mayContain: apple-dns-nameserver mayContain: 1.3.6.1.4.1.63.1000.1.1.1.18.2 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-neighborhood dn: cn=apple-neighborhood,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.20 ldapDisplayName: apple-neighborhood objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-category mayContain: 1.3.6.1.4.1.63.1000.1.1.1.10.4 # mayContain: apple-computeralias mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.3 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-neighborhoodalias mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.2 # mayContain: apple-nodepathxml mayContain: 1.3.6.1.4.1.63.1000.1.1.1.20.1 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 # mayContain: ttl mayContain: 1.3.6.1.4.1.250.1.60 possSuperiors: 2.5.6.5 possSuperiors: container # Class: apple-serverassistant-config dn: cn=apple-serverassistant-config,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.17 ldapDisplayName: apple-serverassistant-config objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-xmlplist mayContain: 1.3.6.1.4.1.63.1000.1.1.1.17.1 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-service dn: cn=apple-service,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.19 ldapDisplayName: apple-service objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mustContain: apple-service-type mustContain: 1.3.6.1.4.1.63.1000.1.1.1.19.1 # mayContain: apple-dnsname mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.4 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-service-location mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.5 # mayContain: apple-service-port mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.3 # mayContain: apple-service-url mayContain: 1.3.6.1.4.1.63.1000.1.1.1.19.2 # mayContain: ipHostNumber mayContain: 1.3.6.1.1.1.1.19 possSuperiors: organizationalUnit possSuperiors: container # Class: apple-user dn: cn=apple-user,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.1 ldapDisplayName: apple-user adminDescription: apple user account objectClassCategory: 3 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: apple-imhandle mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.21 # mayContain: apple-keyword mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.19 # mayContain: apple-mcxflags mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.10 # mayContain: apple-mcxsettings mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.16 # mayContain: apple-user-authenticationhint mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.15 # mayContain: apple-user-class mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.7 # mayContain: apple-user-homequota mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.8 # mayContain: apple-user-homesoftquota mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.17 # mayContain: apple-user-homeurl mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.6 # mayContain: apple-user-mailattribute mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.9 # mayContain: apple-user-picture mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.12 # mayContain: apple-user-printattribute mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.13 # mayContain: apple-webloguri mayContain: 1.3.6.1.4.1.63.1000.1.1.1.1.22 # Class: mount dn: cn=apple-mount,cn=Schema,cn=Configuration,dc=X changetype: ntdsschemaadd objectClass: classSchema governsID: 1.3.6.1.4.1.63.1000.1.1.2.8 ldapDisplayName: mount objectClassCategory: 1 # subclassOf: top subclassOf: 2.5.6.0 # rdnAttId: cn rdnAttId: 2.5.4.3 # mayContain: mountDirectory mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.1 # mayContain: mountDumpFrequency mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.4 # mayContain: mountOption mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.3 # mayContain: mountPassNo mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.5 # mayContain: mountType mayContain: 1.3.6.1.4.1.63.1000.1.1.1.8.2 possSuperiors: 2.5.6.5 possSuperiors: container dn: changetype: modify add: schemaUpdateNow schemaUpdateNow: 1 - # ================================================================== # Updating present elements # ================================================================== # Add the new class to the user object dn: CN=User,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-user - # Add the new class to the computer object dn: CN=Computer,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-computer - # Add the new class to the group object dn: CN=Group,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-group - # Add the new class to the configuration object dn: CN=Configuration,CN=Schema,CN=Configuration,DC=X changetype: modify add: auxiliaryClass auxiliaryClass: apple-configuration -

  Read the article

• Can't install git on Ubuntu 12.10

  - by Lucas Windir

  I'm following these instructions to install git on my laptop: http://git-scm.com/download/linux When I do: $ sudo apt-get install git-core This is what my terinal shows: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libasprintf0c2:i386 libcroco3:i386 libgettextpo0:i386 libgomp1:i386 libunistring0:i386 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: git git-man liberror-perl Suggested packages: git-daemon-run git-daemon-sysvinit git-doc git-el git-arch git-cvs git-svn git-email git-gui gitk gitweb The following NEW packages will be installed: git git-core git-man liberror-perl 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 6,825 kB of archives. After this operation, 15.3 MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! liberror-perl git-man git git-core Install these packages without verification [y/N]? E: Some packages could not be authenticated lucas@lucas-Inspiron-N5050:~$ sudo apt-get install git-core Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libasprintf0c2:i386 libcroco3:i386 libgettextpo0:i386 libgomp1:i386 libunistring0:i386 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: git git-man liberror-perl Suggested packages: git-daemon-run git-daemon-sysvinit git-doc git-el git-arch git-cvs git-svn git-email git-gui gitk gitweb The following NEW packages will be installed: git git-core git-man liberror-perl 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 6,825 kB of archives. After this operation, 15.3 MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! liberror-perl git-man git git-core Install these packages without verification [y/N]? y Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main liberror-perl all 0.17-1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main git-man all 1:1.7.10.4-1ubuntu1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main git amd64 1:1.7.10.4-1ubuntu1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Err httpq://py.archive.ubuntu.com/ubuntu/ quantal/main git-core all 1:1.7.10.4-1ubuntu1 Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch httpq://py.archive.ubuntu.com/ubuntu/pool/main/libe/liberror-perl/liberrorperl_0.17-1_all.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch httpq://py.archive.ubuntu.com/ubuntu/pool/main/g/git/git-man_1.7.10.4-1ubuntu1_all.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch httpq://py.archive.ubuntu.com/ubuntu/pool/main/g/git/git_1.7.10.4-1ubuntu1_amd64.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) Failed to fetch http://py.archive.ubuntu.com/ubuntu/pool/main/g/git/git-core_1.7.10.4-1ubuntu1_all.deb Something wicked happened resolving 'py.archive.ubuntu.com:http' (-5 - No address associated with hostname) E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? How could I install git on Ubuntu 12.10? I can't even do it from the Ubuntu Software Center. Thanks in advance!

  Read the article

• Failling install Ralink RT5592 driver on Ubuntu 14.04 LTS

  - by atisou

  My problem concerns the installation of a wi-fi driver (RT5592) for my new wi-fi adapter (PCE-N53) on my newly built computer. Basically, I don't manage to get the driver installed and therefore I cannot get the wifi to work. I know I am not the only one having this issue this year, between RT5592 driver and Ubuntu 14.04 LTS, in one way or the other. Is there anybody who has ever been able to fix this problem? It does not look like on all the posts I have been through... Following an answer to a same problem as mine (I was getting the same error message as Christopher Kyle Horton of "incompatible types" etc), I have applied the instructions and done the editings in a script as suggested by Paul B. Unfortunately I still do get error/warnings message (a different one this time) at the end of the make and the wi-fi still does not work. Below is a snapshot of the end of the message: In file included from /home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/include/os/rt_linux.h:31:0, from /home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/include/rtmp_os.h:44, from /home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/include/rtmp_comm.h:69, from /home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/pci_main_dev.c:31: include/linux/module.h:88:32: error: ‘__mod_pci_device_table’ aliased to undefined symbol ‘rt2860_pci_tbl’ extern const struct gtype##_id __mod_##gtype##_table \ ^ include/linux/module.h:146:3: note: in expansion of macro ‘MODULE_GENERIC_TABLE’ MODULE_GENERIC_TABLE(type##_device,name) ^ /home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/pci_main_dev.c:73:1: note: in expansion of macro ‘MODULE_DEVICE_TABLE’ MODULE_DEVICE_TABLE(pci, rt2860_pci_tbl); ^ cc1: some warnings being treated as errors make[2]: *** [/home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux/../../os/linux/pci_main_dev.o] Error 1 make[1]: *** [_module_/home/username/Downloads/PCE-N53/Linux/DPO_GPL_RT5592STA_LinuxSTA_v2.6.0.0_20120326/os/linux] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.13.0-32-generic' make: *** [LINUX] Error 2 The full pastebin data: paste.ubuntu.com/8088834/ It looks from the message that one would need to edit manually some of/other scripts in the driver package, as did Paul B suggest in one case. But I have no idea how to do that. Here is the driver package of the wifi adapter: www.asus.com/uk/Networking/PCEN53/HelpDesk_Download/ My system is as following: OS: ubuntu 14.04 LTS wi-fi card: Asus PCE-N53 motherboard: Asus KCMA-D8 processor: AMD Opteron 4228 HE kernel: 3.13.0-32-generic Following this info from chili555 in here, below are some extra info about my system: lspci -nn | grep 0280 gives 04:00.0 Network controller [0280]: Ralink corp. RT5592 PCI2 Wireless Network Adapater [1814:5592] and sudo apt-get install linux-headers-generic returns linux-headers-generic is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. If this is a kernel version (I have 3.13.0-32-generic) incompatibility issue with the driver as chilli555 suggests (the README file in the driver package says indeed it is compatible with kernel 2.6), how could one trick this around to make it work? that should be possible right? On ubuntu forums, the patches proposed dont work (leads the computer to freeze). Basically: is there anybody out there who has ever been able to make a PCE-N53 work on Ubuntu 14.04 LTS (kernel 3.13)? how shall I edit the driver package to make it work for my kernel?

  Read the article

• Oracle Virtualization at Oracle OpenWorld 2012

  - by Chris Kawalek

  Mini-Series Entry 1 of 3: Hands-On Virtualization This is the first entry of a 3 part mini-series aimed at highlighting server and desktop virtualization at this year’s Oracle OpenWorld.  Oracle OpenWorld 2012 is fast approaching! If you are as excited as we are about the fascinating new Oracle virtualization content featured at Oracle OpenWorld 2012, you won’t want to miss this blog mini-series. We will be highlighting sessions that cover advances and innovations in our products, our product strategy and roadmap, and hands on labs for step-by-step instructions from our field and product experts. In the blog mini-series you will learn about: The Oracle Virtualization general keynote session Hands-on labs  Key Oracle server and desktop virtualization sessions In this entry, we will cover the Oracle Virtualization keynote session and the hands-on labs you won't want to miss. General Session: Oracle Virtualization Strategy and Roadmap Session ID: GEN8725 Oracle offers the industry’s most complete and integrated virtualization portfolio enabling organizations to realize benefits beyond simple consolidation as they transform their data centers into flexible cloud-based infrastructures. Join Oracle executives and experts to learn about Oracle’s desktop-to-data-center virtualization solutions, such as the OS, with built-in management integration at all layers that can help you virtualize and manage the complete computing environment, from physical servers to virtual servers and applications. This “don’t-miss” session offers details of the latest product updates and strategy; product roadmaps; integration with enterprise applications; and real-world examples of how Oracle server, desktop, and storage virtualization is benefiting customers. Here are our top picks for Hands-On Labs for Oracle OpenWorld 2012: Oracle Virtual Desktop Infrastructure Performance and Tablet Mobility Session ID: HOL9907 This hands-on lab demonstrates the performance (using an industry-standard load tester) and roaming capabilities of Oracle Virtual Desktop Infrastructure with Oracle’s Sun Ray Clients, Apple iPad and other clients. Deploying an IaaS Environment with Oracle VM: Hands-On Lab  Session ID: HOL9558 This hands-on lab takes you through the planning and deployment of an infrastructure as a service (IaaS) environment with Oracle VM as the foundation. It covers a range of topics, from planning storage capacity, LUN creation, network bandwidth planning, and best practices to designing and streamlining the environment for ease of management. Learn from deeply experienced field engineers and product experts. Virtualize and Deploy Oracle Applications in Minutes with Oracle VM: Hands-On Lab Session ID: HOL9559 This hands-on lab is for application architects or system administrators who will need to deploy and manage Oracle Applications. You’ll learn how Oracle VM Templates can turn you into a power user who can virtualize and deploy complex Oracle Applications in minutes. Longtime field-experienced engineers and product experts will show you, step by step, how to download and import templates and deploy the applications. x86 Enterprise Cloud Infrastructure with Oracle VM 3.x and Sun ZFS Storage Appliance Session ID: HOL9870 The purpose of this hands-on lab is to demonstrate the functionality and usage of Oracle’s enterprise cloud infrastructure for x86 with Oracle VM 3.x. It covers:  Creation of VMs Migration of VMs  Quick and easy deployment of Oracle applications with Oracle VM Templates  Usage of the Storage Connect plug-in for the Sun ZFS Storage Appliance You can find these and other great sessions on the Oracle OpenWorld 2012 Content Catalogue. Start checking now to better plan and organize your week at the conference. Then you’ll be ready to sign up for all of your sessions in mid-July when the scheduling tool goes live. While the hands-on labs allow you to directly interact with Oracle virtualization products, the conference sessions allow you to hear from a wide variety of industry experts on how they're using they technology in real world deployments, solving specific challenges, and more. In tomorrow's entry, we'll start talking about the many conference sessions related to Oracle server and desktop virtualization you can attend during the show. See you then! - The Oracle Virtualization marketing team

  Read the article

• Silverlight Cream for April 29, 2010 -- #851

  - by Dave Campbell

  In this Issue: Carlos Figueira(-2-), Subodh Pushpak, Gergely Orosz, John Papa, Mike Snow(-2-), Rishi, Tim Heuer, Stefan Olson, and David Anson. Shoutouts: Josh Holmes blogged about a cool app the City of Miami has up: Miami 311: Built on Windows Azure Gergely Orosz reports on the state of a bug he found pre SL4: Silverlight 4 still displays large elements incorrectly Laura Foy and Charlie Kindel discuss WP7 on Channel 9: Windows Phone 7 Developer Tools Refresh Announced Charlie Kindel has an announcement, good instructions, and what's new notes on the Windows Phone Developer Tools CTP Refresh! Tim Heuer mentioned the workaround for this in his post (below), but I thought you might like to read Brandon Watson's debrief of what it's all about: Signed Assemblies Bug in the Windows Phone Tools CTP Refresh Laurent Bugnion posted about interrelations between versions of Blend and WP7 code... read it closely: Be careful when installing the Blend Windows Phone 7 Add-In From SilverlightCream.com: Consuming REST/POX services in Silverlight 4 Carlos Figueira has a pair of posts up about consuming services in Silverlight 4. This first one is about consuming REST/POX services. He provides a Service Contract that can be used with either and the full project code is available as well. Consuming REST/JSON services in Silverlight 4 In the second post, Carlos Figueira provides the code to allow WCF and Silverlight 4 to consume strongly-typed REST/JSON... and again, all the code is available. Silverlight and WCF caching Subodh Pushpak has a post up discussing caching in WCF, and has code demonstrating turning caching on at run-time. Detecting Silverlight Version Installed Gergely Orosz said it right when he said "Detecting the Silverlight version installed on a client machine isn’t entirely straightforward." ... and after reading this post, if you take the link to his ScottLogic blog, you'll get a full break-out of how it's done. Silverlight TV 22: Tim Heuer on Extending the SMF It's Thursday, and that means Silverlight TV! ... this week, John Papa has on Tim Heuer who has always been out there pushing media... and he's talking about SMF or Silverlight Media Framework for the uninitiated, and also extending it. Silverlight Tip of the Day #7 – Localized Resources Mike Snow has Tip Number 7 up and it's about localization... good end-to-end discussion and demonstration. Just thought I should use that to prove to my daughter that the tatoo she had put on the back of her neck actually reads "Eat More Broccoli" :) Silverlight Tip of the Day #8 – Detecting Alt, Shift, Control, Window & Apple Keys Combinations I just realized Mike Snow's site logo reads "Silverlight Tips of the Day" (bolding mine) ... that answers why I'm seeing more than one -- sorry Mike, couldn't pass it up :) ... Mike's second tip today and number 8 in the series is on detecting all the mouse button and ctl/alt/shift combinations in Silverlight. nRoute: More Wholesomeness, with SL 4 and .NET 4.0 Rishi has a post up announcing a new nRoute release for Silverlight 4 and .NET 4.0 He's tweaked the code to take advantages of enhancements in the new platforms, so check it out. Windows Phone 7 Developer Tools April 2010 Refresh Booya... Tim Heuer announced the release of the next drop in the WP7 tools ... dang wish I was at home today :) ... be sure to read the post for info such as the notes about Authenticode Assemblies and the release notes. Updates to Silverlight Multi-binding support Stefan Olson points up a SL4 change to Multi-binding support that he had previously blogged about. He shows the previous non-working example, and what you have to do to make it work now. Using XAML to create a custom wallpaper image for your mobile device David Anson has a solution for those pesky lost devices, and let me go on the record right now saying if anyone finds a WP7 phone laying around, just call me, it's mine :) [think that'd work??] ... ok, David's solution is a WPF app "MobileDeviceHomeScreenMaker" that you get the info set and it produces a png you then put on your device. But seriously about that lost phone... Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• 'Make' command compiling errors

  - by G_T

  Im trying to locally install a program which is written in C++. I have downloaded the program and am attempting to use the "make" command to compile the program as the programs instructions dictate. However when I do I get this error: /usr/include/stdc-predef.h:30:26: fatal error: bits/predefs.h: No such file or directory compilation terminated. Looking around on the internet some people seem to address this problem by sudo apt-get install libc6-dev-i386 I checked to see if this package was installed and it was not. When I try to install it I get E: Unable to locate package libc6-dev-i386 I have already run sudo apt get update Im sure this is a rookie question but any help is appreciated, I'm running 13.10 32-bit. UPDATE: I've tried other suggestions I've found on similar error. All I have managed is a different but similar error. Here is what I get. Geoffrey@Geoffrey-Latitude-E6400:/usr/local/src/trinityrnaseq_r2013_08_14$ make Using gnu compiler for Inchworm and Chrysalis cd Inchworm && (test -e configure || autoreconf) \ && ./configure --prefix=`pwd` && make install checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for g++... g++ checking for C++ compiler default output file name... a.out checking whether the C++ compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking for style of include used by make... GNU checking dependency style of g++... gcc3 checking for library containing cos... none required configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands make[1]: Entering directory `/usr/local/src/trinityrnaseq_r2013_08_14/Inchworm' Making install in src make[2]: Entering directory `/usr/local/src/trinityrnaseq_r2013_08_14/Inchworm/src' if g++ -DHAVE_CONFIG_H -I. -I. -I.. -pedantic -fopenmp -Wall -Wextra -Wno-long-long -Wno-deprecated -m64 -g -O2 -MT Fasta_entry.o -MD -MP -MF ".deps/Fasta_entry.Tpo" -c -o Fasta_entry.o Fasta_entry.cpp; \ then mv -f ".deps/Fasta_entry.Tpo" ".deps/Fasta_entry.Po"; else rm -f ".deps/Fasta_entry.Tpo"; exit 1; fi In file included from Fasta_entry.hpp:4:0, from Fasta_entry.cpp:1: /usr/include/c++/4.8/string:38:28: fatal error: bits/c++config.h: No such file or directory #include <bits/c++config.h> ^ compilation terminated. make[2]: *** [Fasta_entry.o] Error 1 make[2]: Leaving directory `/usr/local/src/trinityrnaseq_r2013_08_14/Inchworm/src' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/usr/local/src/trinityrnaseq_r2013_08_14/Inchworm' make: *** [inchworm] Error 2

  Read the article

• Framework 4 Features: Support for Timed Jobs

  - by Anthony Shorten

  One of the new features of the Oracle Utilities Application Framework V4 is the ability for the batch framework to support Timed Batch. Traditionally batch is associated with set processing in the background in a fixed time frame. For example, billing customers. Over the last few versions their has been functionality required by the products required a more monitoring style batch process. The monitor is a batch process that looks for specific business events based upon record status or other pieces of data. For example, the framework contains a fact monitor (F1-FCTRN) that can be configured to look for specific status's or other conditions. The batch process then uses the instructions on the object to determine what to do. To support monitor style processing, you need to run the process regularly a number of times a day (for example, every ten minutes). Traditional batch could support this but it was not as optimal as expected (if you are a site using the old Workflow subsystem, you understand what I mean). The Batch framework was extended to add additional facilities to support times (and continuous batch which is another new feature for another blog entry). The new facilities include: The batch control now defines the job as Timed or Not Timed. Non-Timed batch are traditional batch jobs. The timer interval (the interval between executions) can be specified The timer can be made active or inactive. Only active timers are executed. Setting the Timer Active to inactive will stop the job at the next time interval. Setting the Timer Active to Active will start the execution of the timed job. You can specify the credentials, language to view the messages and an email address to send the a summary of the execution to. The email address is optional and requires an email server to be specified in the relevant feature configuration. You can specify the thread limits and commit intervals to be sued for the multiple executions. Once a timer job is defined it will be executed automatically by the Business Application Server process if the DEFAULT threadpool is active. This threadpool can be started using the online batch daemon (for non-production) or externally using the threadpoolworker utility. At that time any batch process with the Timer Active set to Active and Batch Control Type of Timed will begin executing. As Timed jobs are executed automatically then they do not appear in any external schedule or are managed by an external scheduler (except via the DEFAULT threadpool itself of course). Now, if the job has no work to do as the timer interval is being reached then that instance of the job is stopped and the next instance started at the timer interval. If there is still work to complete when the interval interval is reached, the instance will continue processing till the work is complete, then the instance will be stopped and the next instance scheduled for the next timer interval. One of the key ways of optimizing this processing is to set the timer interval correctly for the expected workload. This is an interesting new feature of the batch framework and we anticipate it will come in handy for specific business situations with the monitor processes.

  Read the article

• Setting up Mono/ASP.NET 4.0 on Apache2/Ubuntu: Virtual hosts?

  - by Dave

  I'm attempting to setup Mono/ASP.NET 4.0 on my Apache server (which is running on Ubuntu). Thus far, I've been following a few tutorials/scripts supplied here, and here. As of now: Apache 2.2 is installed (accessible via 'localhost') Mono 2.10.5 is installed However, I'm struggling to configure Apache correctly... apparently the Virtual Host setting isn't doing its job and invoking the mod_mono plugin, nor is it even pulling source from the proper directory. While the Virtual Host setting points to '\srv\www\localhost', it clearly is pulling content instead from 'var/www/', which I've found is the default DocumentRoot for virtual hosts. I can confirm: "/opt/mono-2.10/bin/mod-mono-server4" exists. Virtual hosts file is being read, since undoing the comment in the main httpd.conf changed the root directory from 'htdocs' to 'var/www/' The Mono installation is at least semi-capable of running ASP 4.0, as evidenced by running XSP, navigating to 0.0.0.0:8080/ and getting an ASP.NET style error page with "Mono ASP 4.0.x" at the bottom. Can anyone point out how to fix these configurations and get Mono linked up with Apache? Here are my configs and relevant information: /usr/local/apache2/conf/httpd.conf: # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo_log" # with ServerRoot set to "/usr/local/apache2" will be interpreted by the # server as "/usr/local/apache2/logs/foo_log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/usr/local/apache2" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin david@localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServerName localhost:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/usr/local/apache2/htdocs" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/usr/local/apache2/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/usr/local/apache2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or 0 for unlimited # Default setting is to accept 200 Ranges #MaxRanges 0 # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> * /usr/local/apache2/conf/extra/httpd-vhosts.conf * # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *:80> ServerName localhost ServerAdmin david@localhost DocumentRoot "/srv/www/localhost" # MonoServerPath can be changed to specify which version of ASP.NET is hosted # mod-mono-server1 = ASP.NET 1.1 / mod-mono-server2 = ASP.NET 2.0 # For SUSE Linux Enterprise Mono Extension, uncomment the line below: # MonoServerPath localhost "/opt/novell/mono/bin/mod-mono-server2" # For Mono on openSUSE, uncomment the line below instead: MonoServerPath localhost "/opt/mono-2.10/bin/mod-mono-server4" # To obtain line numbers in stack traces you need to do two things: # 1) Enable Debug code generation in your page by using the Debug="true" # page directive, or by setting <compilation debug="true" /> in the # application's Web.config # 2) Uncomment the MonoDebug true directive below to enable mod_mono debugging MonoDebug localhost true # The MONO_IOMAP environment variable can be configured to provide platform abstraction # for file access in Linux. Valid values for MONO_IOMAP are: # case # drive # all # Uncomment the line below to alter file access behavior for the configured application MonoSetEnv localhost PATH=/opt/mono-2.10/bin:$PATH;LD_LIBRARY_PATH=/opt/mono-2.10/lib:$LD_LIBRARY_PATH; # # Additional environtment variables can be set for this server instance using # the MonoSetEnv directive. MonoSetEnv takes a string of 'name=value' pairs # separated by semicolons. For instance, to enable platform abstraction *and* # use Mono's old regular expression interpreter (which is slower, but has a # shorter setup time), uncomment the line below instead: # MonoSetEnv localhost MONO_IOMAP=all;MONO_OLD_RX=1 MonoApplications localhost "/:/srv/www/localhost" <Location "/"> Allow from all Order allow,deny MonoSetServerAlias localhost SetHandler mono SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary </Location> <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript </IfModule> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/usr/local/apache2/docs/dummy-host.example.com" ServerName dummy-host.example.com ServerAlias www.dummy-host.example.com ErrorLog "logs/dummy-host.example.com-error_log" CustomLog "logs/dummy-host.example.com-access_log" common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/usr/local/apache2/docs/dummy-host2.example.com" ServerName dummy-host2.example.com ErrorLog "logs/dummy-host2.example.com-error_log" CustomLog "logs/dummy-host2.example.com-access_log" common </VirtualHost> mono -V output: root@david-ubuntu:~# mono -V Mono JIT compiler version 2.6.7 (Debian 2.6.7-5ubuntu3) Copyright (C) 2002-2010 Novell, Inc and Contributors. www.mono-project.com TLS: __thread GC: Included Boehm (with typed GC and Parallel Mark) SIGSEGV: altstack Notifications: epoll Architecture: amd64 Disabled: none

  Read the article

• POP Forums v9 Beta 1 for ASP.NET MVC 3 posted to CodePlex!

  - by Jeff

  As promised, I posted a beta build of my forum app for ASP.NET MVC 3. Get the new goodies here: http://popforums.codeplex.com/releases/view/58228 This is the first beta for the ASP.NET MVC 3 version of POP Forums. It is nearly feature complete, and ready for testing and feedback. For previous release notes, look here, here and here.Check out the live preview: http://preview.popforums.com/ForumsSetup instructions are on the home page of this project. The new hotness in the beta, or what has been done since the last preview: All views converted to use Razor E-mail subscription/notification of new posts New post indicators/mark read buttons Permalinks to posts Jump to newest post (from new post indicators) Recent topics Favorite topics Moderator functions for topics (pin/close/delete, plus move and rename) Search, ported from v8. Not a ton of optimization here, or new unit testing, but the old version worked pretty well User posts (topics the user posted in) Forgot password Vanity items (signatures and avatars) Hide vanity items per user preference Some minor data caching where appropriate A little bit of UI refinement Lots-o-bug fixes Lots-o-unit tests What's next? The plan between now and the next beta is as follows: Continue working through features/tasks, and fix bugs as they're reported Integrate the forum into a real, production site Refine the UI Refactor as much as possible... the code organization is not entirely logical in some places After the second beta, a release candidate will follow, with a real "final" release after that. Subsequent releases should come relatively frequently and without a lot of risk. The trick in building this thing has been that it mostly tossed the previous WebForms version, which was all full of crusties. The time table for this is a little harder to pin down, as day jobs and families will have their effect. Other notes Refactoring will be a priority. As the features of MVC have evolved, so have my desires to use it in a fashion that makes things clear and easy to follow. I don't even know if anyone will ever start mucking around in the code, but on the off chance they do, I'd like what they find to not suck. Other nice-to-haves are builds to target Windows Azure and SQL CE. A nice setup UI would be super too. I think the ASP.NET MVC world has gone long enough without a decent forum.The biggest challenge that I've found is making the forum something that can be dropped in any app. While it does rope its views into an area, areas are mostly just routing details. I haven't thought of a clever way yet to limit dependency injection, for example, to just the forum bits. I mean, everyone should be using Ninject, but how realistic is that? ;)How much time and effort should you spend on POP Forums in its current state? Change is inevitable, but at this point I'm reasonably committed to not changing the database schema. I really think it will stay as-is. All bets are off for the various interfaces throughout the app, but the data should generally resist change. It's not even that different from v8, which was one of the original goals because I didn't want to rewrite SQL or introduce a new ORM or whatever. My point is that if you wanted to build a site around this today, even though it's not entirely functional, I think it's low risk in terms of data loss. I can't vouch for whether or not you know what you're doing.I've been having some chats with people lately about quoting posts, and honestly there has to be something better and straight forward. That continues to be a holy grail of mine, and some day, I hope to find it.Enjoy... it's starting to feel more real every day!

  Read the article

• htaccess rewriterule works in one virtualhost, but not a second virtualhost

  - by Casey Flynn

  I have two virtualhosts configured with xampp on mac os x snow lion. Both use the following .htaccess file. <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / # Protect hidden files from being viewed <Files .*> Order Deny,Allow Deny From All </Files> #Removes access to the system folder by users. #Additionally this will allow you to create a System.php controller, #previously this would not have been possible. #'system' can be replaced if you have renamed your system folder. RewriteCond %{REQUEST_URI} ^system.* RewriteRule ^(.*)$ /index.php?/$1 [L] #When your application folder isn't in the system folder #This snippet prevents user access to the application folder #Submitted by: Fabdrol #Rename 'application' to your applications folder name. RewriteCond %{REQUEST_URI} ^application.* RewriteRule ^(.*)$ /index.php?/$1 [L] #Checks to see if the user is attempting to access a valid file, #such as an image or css document, if this isn't true it sends the #request to index.php RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php/$01 [L] # If we don't have mod_rewrite installed, all 404's # can be sent to index.php, and everything works as normal. # Submitted by: ElliotHaughin ErrorDocument 404 /index.php My goal is to eliminate /index.php/ from my url strings. This htaccess works perfectly for one project, but not for the other (project/vhost) This is my vhosts.conf # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "/Applications/xampp/xamppfiles" will be interpreted by the # server as "/Applications/xampp/xamppfiles/logs/foo.log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/Applications/XAMPP/xamppfiles" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule cache_module modules/mod_cache.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule dbd_module modules/mod_dbd.so LoadModule bucketeer_module modules/mod_bucketeer.so LoadModule dumpio_module modules/mod_dumpio.so LoadModule echo_module modules/mod_echo.so LoadModule case_filter_module modules/mod_case_filter.so LoadModule case_filter_in_module modules/mod_case_filter_in.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule include_module modules/mod_include.so LoadModule filter_module modules/mod_filter.so LoadModule charset_lite_module modules/mod_charset_lite.so LoadModule deflate_module modules/mod_deflate.so LoadModule ldap_module modules/mod_ldap.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule expires_module modules/mod_expires.so LoadModule headers_module modules/mod_headers.so LoadModule ident_module modules/mod_ident.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule unique_id_module modules/mod_unique_id.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule asis_module modules/mod_asis.so LoadModule info_module modules/mod_info.so LoadModule suexec_module modules/mod_suexec.so LoadModule cgi_module modules/mod_cgi.so LoadModule cgid_module modules/mod_cgid.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule imagemap_module modules/mod_imagemap.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so #LoadModule apreq_module modules/mod_apreq2.so LoadModule ssl_module modules/mod_ssl.so <IfDefine JUSTTOMAKEAPXSHAPPY> LoadModule php4_module modules/libphp4.so LoadModule php5_module modules/libphp5.so </IfDefine> <IfModule !mpm_winnt_module> <IfModule !mpm_netware_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User nobody Group nogroup </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:80 # XAMPP ServerName localhost # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/Users/caseyflynn/Documents/workspace/vibecompass" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None #XAMPP #Order deny,allow #Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/Users/caseyflynn/Documents/workspace/vibecompass"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks ExecCGI Includes # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride All # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html index.php index.htmls index.htm </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog logs/error_log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog logs/access_log common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog logs/access_log combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/Applications/XAMPP/xamppfiles/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/Applications/xampp/xamppfiles/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/Applications/XAMPP/xamppfiles/phpmyadmin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig etc/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi AddHandler cgi-script .cgi .pl # For files that include their own HTTP headers: #AddHandler send-as-is asis # For server-parsed imagemap files: #AddHandler imap-file map # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile etc/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # EnableMMAP off EnableSendfile off # Supplemental configuration # # The configuration files in the /Applications/xampp/etc/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include /Applications/XAMPP/etc/extra/httpd-mpm.conf # Multi-language error messages Include /Applications/XAMPP/etc/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include /Applications/XAMPP/etc/extra/httpd-autoindex.conf # Language settings #Include /Applications/XAMPP/etc/extra/httpd-languages.conf # User home directories Include /Applications/XAMPP/etc/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include /Applications/XAMPP/etc/extra/httpd-info.conf # Virtual hosts Include /Applications/XAMPP/etc/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include /Applications/XAMPP/etc/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include /Applications/XAMPP/etc/extra/httpd-dav.conf # Various default settings #Include /Applications/XAMPP/etc/extra/httpd-default.conf # Secure (SSL/TLS) connections Include /Applications/XAMPP/etc/extra/httpd-ssl.conf <IfModule ssl_module> <IfDefine SSL> Include etc/extra/httpd-ssl.conf </IfDefine> </IfModule> # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> #XAMPP Include etc/extra/httpd-xampp.conf Any idea what might be the root of this? ANSWER: had to add this to my httpd.conf file <Directory /Users/caseyflynn/Documents/workspace/cobar> Options FollowSymLinks AllowOverride all #XAMPP Order deny,allow Allow from all </Directory>

  Read the article

• Creating typed WSDL’s for generic WCF services of the ESB Toolkit

  - by charlie.mott

  source: http://geekswithblogs.net/charliemott Question How do you make it easy for client systems to consume the generic WCF services exposed by the ESB Toolkit using messages that conform to agreed schemas\contracts?  Usually the developer of a system consuming a web service adds a service reference using a WSDL. However, the WSDL’s for the generic services exposed by the ESB Toolkit do not make it easy to develop clients that conform to agreed schemas\contracts. Recommendation Take a copy of the generic WSDL’s and modify it to use the proper contracts. This is very easy.  It will work with the generic on ramps so long as the <part>?</part> wrapping is removed from the WCF adapter configuration in the BizTalk receive locations.  Attempting to create a WSDL where the input and output messages are sent/returned with a <part> wrapper is a nightmare.  I have not managed it.  Consequences I can only see the following consequences of removing the <part> wrapper: ESB Test Client – I needed to modify the out-of-the-box ESB Test Client source code to make it send non-wrapped messages.  Flat file formatted messages – the endpoint will no longer support flat file message formats.  However, even if you needed to support this integration pattern through WCF, you would most-likely want to create a separate receive location anyway with its’ own independently configured XML disassembler pipeline component. Instructions These steps show how to implement a request-response implementation of this. WCF Receive Locations In BizTalk, for the WCF receive location for the ESB on-ramp, set the adapter Message settings\bindings to “UseBodyPath”: Inbound BizTalk message body  = Body Outbound WCF message body = Body Create a WSDL’s for each supported integration use-case Save a copy of the WSDL for the WCF generic receive location above that you intend the client system to use. Give it a name that mirrors the interface agreement (e.g. Esb_SuppliersSearchCommand_wsHttpBinding.wsdl).   Add any xsd schemas files imported below to this same folder.   Edit the WSDL to import schemas For example, this: <xsd:schema targetNamespace=http://microsoft.practices.esb/Imports /> … would become something like: <xsd:schema targetNamespace="http://microsoft.practices.esb/Imports">     <xsd:import schemaLocation="SupplierSearchCommand_V1.xsd"                            namespace="http://schemas.acme.co.uk/suppliersearchcommand/1.0"/>     <xsd:import  schemaLocation="SuppliersDocument_V1.xsd"                              namespace="http://schemas.acme.co.uk/suppliersdocument/1.0"/>     <xsd:import schemaLocation="Types\Supplier_V1.xsd"                              namespace="http://schemas.acme.co.uk/types/supplier/1.0"/>     <xsd:import  schemaLocation="GovTalk\bs7666-v2-0.xsd"                               namespace="http://www.govtalk.gov.uk/people/bs7666"/>     <xsd:import  schemaLocation="GovTalk\CommonSimpleTypes-v1-3.xsd"                             namespace="http://www.govtalk.gov.uk/core"/>     <xsd:import  schemaLocation="GovTalk\AddressTypes-v2-0.xsd"                              namespace="http://www.govtalk.gov.uk/people/AddressAndPersonalDetails"/> </xsd:schema> Modify the Input and Output message For example, this: <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_InputMessage">   <wsdl:part name="part" type="xsd:anyType"/> </wsdl:message> <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_OutputMessage">   <wsdl:part name="part" type="xsd:anyType"/> </wsdl:message> … would become something like: <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_InputMessage">   <wsdl:part name="part"                       element="ssc:SupplierSearchEvent"                         xmlns:ssc="http://schemas.acme.co.uk/suppliersearchcommand/1.0" /> </wsdl:message> <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_OutputMessage">   <wsdl:part name="part"                       element="sd:SuppliersDocument"                       xmlns:sd="http://schemas.acme.co.uk/suppliersdocument/1.0"/> </wsdl:message> This WSDL can now be added as a service reference in client solutions.

  Read the article

• Tool to convert blogger.com content to dasBlog

  - by Daniel Moth

  Due to blogger.com dropping FTP support, I've had to move my blog. If you are in a similar situation, this post will help you by showing you the necessary steps to take. Goals No loss on blog posts, comments AND all existing permalinks continue to work (redirect to the correct place). Steps Download the XML files corresponding to your blogger.com content and store them in a folder. Install and configure dasBlog on your local machine. Configure your web.config file (will need updating once you run step 4). Use the tool I describe further down to generate the content and place it at the right place. Test your site locally. Once you are happy, repeat step 2 on your hosting provider of choice. Remember to copy up your dasBlog theme folder if you created one. Copy up the local web.config file and the XML dasBlog content files generated by the tool of step 4. Test your site on the server. Once you are happy, go live (following instructions from your hoster). In my case, I gave the nameservers from my new hoster to my existing domain registrar and they made the switch. Tool (code) At step 4 above I referred to a tool. That is an overstatement, it is simply one 450-line C#code file that you can download here: BloggerToDasBlog.cs. I used this from a .NET 2.0 console app (and I run it under the Visual Studio debugger, i.e. F5) like this: Program.cs. The console app referenced the dasBlog 2.3 ASP.NET Blogging Engine i.e. the newtelligence.DasBlog.Runtime.dll assembly. Let me describe what the code does: Input: A path to a folder where the XML files from the old blogger.com blog reside. It can deal with both types of XML file. A full file path to a file where it creates XML redirect input (as required by the rewriteMap mentioned here). The blog URL. The author's email. The blog author name. A path to an empty folder where the new XML dasBlog content files will get created. The subfolder name used after the domain name in the URL. The 3 reg ex patterns to use. You can use the same as mine, but will need to tweak the monthly_archive rule. Again, to see what values I passed for all the above, see my Program.cs file. Output: It creates dasBlog XML files in the folder specified. It creates those by parsing the old blogger.com XML files that reside in the folder specified. After that is generated, copy it to the "Content" folder under your dasBlog installation. It creates an XML file with a single ignorable root element and a bunch of inner XML elements. You can copy paste these in the web.config file as discussed in this post. Other notes: For each blog post, it detects outgoing links to itself (i.e. to the same blog), and rewrites those to point to the new URLs. So internal links do not rely on the web.config redirects. It deals with duplicate post titles; it does not deal with triplicates and higher. Removes all references to blogger.com (e.g. references to [email protected], the injected hidden footer for statistics that each blog post has and others – see the code). It creates a lot of diagnostic output (in the Output window) and indeed the documentation for the code is in the Debug.WriteLine statements ;) This is not code I will maintain or support – it was a throwaway one-use project that I am sharing here as a starting point for anyone finding themselves in the same boat that I was. Enjoy "as is". Comments about this post welcome at the original blog.

  Read the article

• How to Browse Without a Trace with an Ubuntu Live CD

  - by Trevor Bekolay

  No matter how diligently you clear your cache and erase your history, web browsing leaves traces on your computer. If you need keep your browsing private, then an Ubuntu Live CD is the answer. The key to this trick is that the Live CD environment runs completely in RAM, so things like your cache, cookies, and history don’t get saved to a persistent storage location. On a hard drive, even deleted files can be recovered, but once a computer is turned off the data stored in RAM is unrecoverable. In addition, since the Ubuntu Live CD environment is the same no matter what computer you use it on, there’s very little identifying information that a website can use to track you! The first step is to either burn an Ubuntu Live CD, or prepare a non-persistent Ubuntu USB flash drive. Ubuntu treats non-persistent flash drives like CDs, so files will not be written to it, but if you’re paranoid, then using a physical CD ensures that nothing gets written to a storage device. Boot up from the CD or flash drive, and choose to Run Ubuntu from the CD or flash drive if prompted (for more detailed instructions on booting from a CD or USB drive, see this article, or our guide on booting from a flash drive even if your BIOS won’t let you). Once the graphical Ubuntu environment comes up, you can click on the Firefox icon at the top of the screen to start browsing. If your browsing requires Flash, then you can install it by clicking on System at the top-left of the screen, then Administration > Synaptic Package Manager. Click on Settings at the top of the Synaptic window, and then select Repositories. Add a check in the checkbox with the label ending in “multiverse”. Click Close. Click the Reload button in the main Synaptic window. The list of available packages will reload. When they’ve reloaded, type “restricted” in the Quick search box. Right-click on ubuntu-restricted-extras and select Mark for Installation. It will note a number of other packages that will be installed. This list includes audio and video codecs, so after installing these, you should be able to play downloaded movies and songs. Click Mark to accept the installation of these other packages. Once you return to the main Synaptic window, click the Apply button and go through the dialogs to finish the installation of Flash and the other useful packages. If you open up Firefox now, you’ll have no problems using websites that use Flash. When you’re done browsing and shut down or restart your computer, all traces of your web browsing will be gone. It’s a bit of work compared to just using a privacy-centric browser, but if it’s very important that your browsing leave no traces on your hard drive, an Ubuntu Live CD is your best bet. Download Ubuntu Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDAdding extra Repositories on UbuntuHow to Add a Program to the Ubuntu Startup List (After Login)How to install Spotify in Ubuntu 9.10 using WineInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

  Read the article

• Install GIMP 2.7.1 on Lucid Lynx using PPA

  - by Vivek

  GIMP lovers are going to be disappointed to hear that GIMP is going away in the next release of much awaited Ubuntu 10.04. Today we take a look at installing in on Lucid Lynx using PPA. The reason for getting rid of it as cited by the GIMP developers, is that GIMP is too professional a software to be included in regular desktop version of Ubuntu. And it takes up too much of space on the disk. Also, the fact that it’s too complicated for regular users. If you can’t live without it…let’s see how to install GIMP 2.7.1 on Lucid Lynx (Currently in Alpha). The new version of GIMP supports single window mode and we will also see how to enable this feature as well. First we need to add the official GIMP 2.7.1 PPA in the software sources of Ubuntu 10.04, by opening the terminal window and typing the following command: sudo sh -c “echo ‘deb http://ppa.launchpad.net/matthaeus123/mrw-gimp-svn/ubuntu lucid main’ >> /etc/apt/sources.list” Now that we have added the PPA we need to add the GPG key, so type the following in your Terminal window. sudo apt-key adv –recv-keys –keyserver keyserver.ubuntu.com 405A15CB Next up we have to update the software repository… sudo apt-get update All that is left is to install GIMP 2.7.1 by typing in the following… sudo apt-get install gimp Click ‘Y’ (for yes) to install GIMP Once GIMP is installed you can start it by going to Applications > Graphics > GNU Image Manipulation Program. You now have your favorite GIMP on your favorite Ubuntu 10.04. As you can see in the image below, GIMP still comes with default 3 windows, which could clog up your lower panel In Ubuntu 10.04. However, now you can run GIMP in single window mode by going to Windows > Single-Window mode. That’s all! Now you have your GIMP running in single window mode with less of hassle to manage 3 windows. It’s unfortunate that GIMP will not be included, but by following these instructions, you’ll be able to enjoy using it in Ubuntu 10.04. Similar Articles Productive Geek Tips Show the List of Installed Packages on Ubuntu or DebianHow to Install Windows Applications on Linux Using CrossoverInstall VMware Tools on Ubuntu Edgy EftInstall Adobe PDF Reader on Ubuntu EdgyInstall MySQL Server 4.1 on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements

  Read the article

• Juju stuck in "pending" state when using LXC

  - by Andre

  So I'm trying to get started with Juju, and tried to do this locally using LXC. I followed the instructions here: How do I configure juju for local usage? Unfortunately this doesn't seem to work for me. status shows the following: $ juju status machines: 0: agent-state: running dns-name: localhost instance-id: local instance-state: running services: mysql: charm: cs:precise/mysql-1 relations: db: - wordpress units: mysql/0: agent-state: pending machine: 0 public-address: null wordpress: charm: cs:precise/wordpress-0 exposed: true relations: db: - mysql units: wordpress/0: agent-state: pending machine: 0 open-ports: [] public-address: null 2012-05-10 14:09:38,155 INFO 'status' command finished successfully As you can see the agent-state is 'pending' and there is no public address where I'm able to access the newly created site. Am I missing something here? UPDATE: Tried destroying the environment an doing everything again (multiple times). This is the output for debug-log: ~$ juju debug-log 2012-05-11 08:50:23,790 INFO Enabling distributed debug log. 2012-05-11 08:50:23,806 INFO Tailing logs - Ctrl-C to stop. 2012-05-11 08:50:42,338 Machine:0: juju.agents.machine DEBUG: Units changed old:set([]) new:set(['mysql/0']) 2012-05-11 08:50:42,339 Machine:0: juju.agents.machine DEBUG: Starting service unit: mysql/0 ... 2012-05-11 08:50:42,459 Machine:0: unit.deploy DEBUG: Downloading charm cs:precise/mysql-1 to /home/andre/.juju/data/andre-local/charms 2012-05-11 08:50:42,620 Machine:0: unit.deploy DEBUG: Using <juju.machine.unit.UnitContainerDeployment object at 0x9c54b6c> for mysql/0 in /home/andre/.juju/data/andre-local 2012-05-11 08:50:42,648 Machine:0: unit.deploy DEBUG: Starting service unit mysql/0... 2012-05-11 08:50:42,649 Machine:0: unit.deploy DEBUG: Creating master container... 2012-05-11 08:54:33,992 Machine:0: unit.deploy DEBUG: Created master container andre-local-0-template 2012-05-11 08:54:33,993 Machine:0: unit.deploy INFO: Creating container mysql-0... 2012-05-11 08:56:18,760 Machine:0: unit.deploy INFO: Container created for mysql/0 2012-05-11 08:56:19,466 Machine:0: unit.deploy DEBUG: Charm extracted into container 2012-05-11 08:56:19,569 Machine:0: unit.deploy DEBUG: Starting container... 2012-05-11 08:56:22,707 Machine:0: unit.deploy INFO: Started container for mysql/0 2012-05-11 08:56:22,707 Machine:0: unit.deploy INFO: Started service unit mysql/0 2012-05-11 08:56:23,012 Machine:0: juju.agents.machine DEBUG: Units changed old:set(['mysql/0']) new:set(['wordpress/0', 'mysql/0']) 2012-05-11 08:56:23,039 Machine:0: juju.agents.machine DEBUG: Starting service unit: wordpress/0 ... 2012-05-11 08:56:23,154 Machine:0: unit.deploy DEBUG: Downloading charm cs:precise/wordpress-0 to /home/andre/.juju/data/andre-local/charms 2012-05-11 08:56:23,396 Machine:0: unit.deploy DEBUG: Using <juju.machine.unit.UnitContainerDeployment object at 0x9c519cc> for wordpress/0 in /home/andre/.juju/data/andre-local 2012-05-11 08:56:23,620 Machine:0: unit.deploy DEBUG: Starting service unit wordpress/0... 2012-05-11 08:56:23,621 Machine:0: unit.deploy INFO: Creating container wordpress-0... 2012-05-11 08:58:24,739 Machine:0: unit.deploy INFO: Container created for wordpress/0 2012-05-11 08:58:25,163 Machine:0: unit.deploy DEBUG: Charm extracted into container 2012-05-11 08:58:25,397 Machine:0: unit.deploy DEBUG: Starting container... 2012-05-11 08:58:27,982 Machine:0: unit.deploy INFO: Started container for wordpress/0 2012-05-11 08:58:27,983 Machine:0: unit.deploy INFO: Started service unit wordpress/0 This is the result for the status command (with verbose flag): ~$ juju -v status 2012-05-11 08:51:53,464 DEBUG Initializing juju status runtime 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@658: Client environment:zookeeper.version=zookeeper C client 3.3.5 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@662: Client environment:host.name=andre-ufo 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@669: Client environment:os.name=Linux 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@670: Client environment:os.arch=3.2.0-24-generic-pae 2012-05-11 08:51:53,625:4030(0xb7345b00):ZOO_INFO@log_env@671: Client environment:os.version=#37-Ubuntu SMP Wed Apr 25 10:47:59 UTC 2012 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@679: Client environment:user.name=andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@687: Client environment:user.home=/home/andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@log_env@699: Client environment:user.dir=/home/andre 2012-05-11 08:51:53,626:4030(0xb7345b00):ZOO_INFO@zookeeper_init@727: Initiating client connection, host=192.168.122.1:41779 sessionTimeout=10000 watcher=0xb7780620 sessionId=0 sessionPasswd=<null> context=0x9242ee8 flags=0 2012-05-11 08:51:53,627:4030(0xb6b90b40):ZOO_INFO@check_events@1585: initiated connection to server [192.168.122.1:41779] 2012-05-11 08:51:53,649:4030(0xb6b90b40):ZOO_INFO@check_events@1632: session establishment complete on server [192.168.122.1:41779], sessionId=0x1373ae057d90007, negotiated timeout=10000 2012-05-11 08:51:53,651 DEBUG Environment is initialized. machines: 0: agent-state: running dns-name: localhost instance-id: local instance-state: running services: mysql: charm: cs:precise/mysql-1 relations: db: - wordpress units: mysql/0: agent-state: pending machine: 0 public-address: null wordpress: charm: cs:precise/wordpress-0 relations: db: - mysql units: wordpress/0: agent-state: pending machine: 0 public-address: null

  Read the article

• Calling XAI Inbound Services from Oracle BI Publisher

  - by ACShorten

  Note: This technique requires Oracle BI Publisher 1.1.3.4.1 which supports Service Complex Types. Web Services require credentials for authentication. Note: The deafults for the product installation are used in this article. If your site uses alternative values then substitute those alternatives where applicable. Note: Examples shown in this article are examples for illustrative purposes only. When building a report in Oracle BI Publisher it may be necessary to call an XAI Inbound Service to get information via the object rather than directly calling the database tables for various reasons: The CLOB fields used in the Object are accessible for a report. Note: CLOB fields cannot be used as criteria in the current release. Objects can take advantage of algorithms to format or calculate additional data that is not stored in the database directly. For example, Information format strings can automatically generated by the object which gives consistent information between a report and the online screens. To use this facility the following process must be performed: Ensure that the product group, cisusers by default, is enabled for the SPLServiceBean in the console. This allows BI Publisher access to call Web Services directly. To ensure this follow the instructions below: Logon to the Oracle WebLogic server console using an appropriate administrator account. By default the user system or weblogic is provided for this purpose. Navigate to the Security Realms section and select your configured realm. This is set to myrealm by default. In the Roles and Policies section, expand the SPLService section of the Deployments option to reveal the SPLServiceBean roles. If there is no role associated with the SPLServiceBean, create a new EJB role and specify the cisusers role, by default. For example:   Add a Role Condition to the role just created, with a Predicate List of Group and specify cisusers as the Group Argument Name. For example: Save all your changes. The XAI Inbound Services to be used by BI Publisher must be defined prior to using the interface. Refer to the XAI Best Practices (Doc Id: 942074.1) from My Oracle Support or via the online help for more information about this process. Inside BI Publisher create your report, according to the BI Publisher documentation. When specifying the dataset, under the Data Model Report option, specify the following to use an XAI Inbound Service as a data source: Parameter Comment Type Web Service Complex Type true Username Any valid user name within the product. This user MUST have security access to the objects referenced in the XAI Inbound Service Password Authentication password for Username Timeout Timeout, in seconds, set for the Web Service call. For example 60 seconds. WSDL URL Use the WSDL URL on the XAI Inbound Service definition as your WSDL URL. It will be in the following format by default:http://<host>:<port>/<server>/XAIApp/xaiserver/<service>?WSDLwhere: <host> - Host Name of Web Application Server <port> - Port allocated to Web Application Server for product access <server> - Server context for server <service> - XAI Inbound Service Name Note: For customers using secure transmission should substitute https instead of http and use the HTTPS port allocated to the product at installation time. Web Service Select the name of the service that shows in the drop-down menu. If no service name shows up, it means that Publisher could not establish a connection with the server or WSDL name provided in the above URL in order to get the service name. See BI Publisher server log for more information. Method Select the name of the Method that shows in the drop-down menu. A method name should show in the Method drop-down menu once the Web Service name is selected. For example: Additionally, filters can be used from the Web Service that can be generated, required or optional, from the WSDL in the Parameter List. For example:

  Read the article

• Plymouth and GRUB do not show at all

  - by WarriorIng64

  I am using Ubuntu 11.04 64-bit as my only OS on my desktop computer, which used to only run Ubuntu 10.04 LTS until I had the time to upgrade it with a fresh install. It uses integrated NVIDIA graphics (listed as a GeForce 6150SE nForce 430 by the NVIDIA X Server Settings utility) with the current proprietary driver as provided by the Additional Drivers utility, and has a VGA connection to a 1680x1050 Acer monitor. I used to get the (ugly-looking version of) Plymouth graphical boot screen while under 10.04. It didn't look that great, but I was fine with it. Now, it doesn't show on 11.04 at all during boot (I just get an error message in a moving gray box from the monitor saying "Input Not Supported"), and only rarely it will show on shutdown, all garbled up. I could not get GRUB to show during boot while holding down Shift, either (same error message), but pressing Enter while it should be up starts the system normally. A picture of the error message I was getting: Once fully booted, the system still shows the login screen and desktop just fine. Any information on how to troubleshoot this would be appreciated. If there's any hardware-specific stuff I forgot to include here, let me know the relevant commands to run in a comment below. Things that I've tried: Running plymouth in a framebuffer: no effect Booting with nomodeset as my grub boot: option no effect Booting with nomodeset and plymouth in a framebuffer: no effect other than Plymouth showing during shutdown only Following the Softpedia instructions for fixing Plymouth's resolution: Problem mostly solved, except logo does not show in Plymouth during boot, and both grub and Plymouth are slightly off-center #4 above, but with nomodeset removed as a grub boot option: same effect as #4 #5 above, but with vt.handoff=7 added as a grub boot option: same effect as #4 I have added the current contents of /etc/default/grub as requested in the comments: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1280x1024 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" CURRENT STATUS: I forgot to uncomment one line as per "things that I've tried" #4, so I took care of that. I can now see GRUB during startup when I hold Shift and a normal-looking Plymouth during shutdown...but Plymouth during boot is now just a solid purple screen. In each case, it's displayed a little off-center to the left, with a thin black bar running down the right side of the monitor. The error pictured above no longer shows. I'd say this problem is about 2/3 solved now. UPDATE: After Natty started freezing up on me, I decided to dual-boot with Oneiric, which unfortunately shows the same problems. Rather than trying all these workarounds though, I decided to do what I should have done from the start and file a pair of bug reports. LAST UPDATE: Bug 850908 has been confirmed as a legitimate nouveaufb bug. I have overwritten my 11.04 partition with 12.04 LTS, and I can confirm at this time that the issue is present there, as well. I will now flag this question to be closed, yet I hope it was helpful for anyone who experienced similar issues; if you are still having the same problem as me, please go there and mark yourself as affected. Thanks!

  Read the article

• Clone a Hard Drive Using an Ubuntu Live CD

  - by Trevor Bekolay

  Whether you’re setting up multiple computers or doing a full backup, cloning hard drives is a common maintenance task. Don’t bother burning a new boot CD or paying for new software – you can do it easily with your Ubuntu Live CD. Not only can you do this with your Ubuntu Live CD, you can do it right out of the box – no additional software needed! The program we’ll use is called dd, and it’s included with pretty much all Linux distributions. dd is a utility used to do low-level copying – rather than working with files, it works directly on the raw data on a storage device. Note: dd gets a bad rap, because like many other Linux utilities, if misused it can be very destructive. If you’re not sure what you’re doing, you can easily wipe out an entire hard drive, in an unrecoverable way. Of course, the flip side of that is that dd is extremely powerful, and can do very complex tasks with little user effort. If you’re careful, and follow these instructions closely, you can clone your hard drive with one command. We’re going to take a small hard drive that we’ve been using and copy it to a new hard drive, which hasn’t been formatted yet. To make sure that we’re working with the right drives, we’ll open up a terminal (Applications > Accessories > Terminal) and enter in the following command sudo fdisk –l We have two small drives, /dev/sda, which has two partitions, and /dev/sdc, which is completely unformatted. We want to copy the data from /dev/sda to /dev/sdc. Note: while you can copy a smaller drive to a larger one, you can’t copy a larger drive to a smaller one with the method described below. Now the fun part: using dd. The invocation we’ll use is: sudo dd if=/dev/sda of=/dev/sdc In this case, we’re telling dd that the input file (“if”) is /dev/sda, and the output file (“of”) is /dev/sdc. If your drives are quite large, this can take some time, but in our case it took just less than a minute. If we do sudo fdisk –l again, we can see that, despite not formatting /dev/sdc at all, it now has the same partitions as /dev/sda.  Additionally, if we mount all of the partitions, we can see that all of the data on /dev/sdc is now the same as on /dev/sda. Note: you may have to restart your computer to be able to mount the newly cloned drive. And that’s it…If you exercise caution and make sure that you’re using the right drives as the input file and output file, dd isn’t anything to be scared of. Unlike other utilities, dd copies absolutely everything from one drive to another – that means that you can even recover files deleted from the original drive in the clone! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDHow to Browse Without a Trace with an Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• BizTalk Server Monitoring &ndash; SharePoint Web Part

  - by SURESH GIRIRAJAN

  I have been worked with customers using BizTalk as shared infrastructure in the enterprise, where we have two or more BizTalk apps running on it for different Business groups. Also these customers are not using BizTalk ESB portal even though they are using BizTalk ESB exception framework. So main issue with all these Business groups are they don’t have visibility into the BizTalk apps running in prod, even though they are using SCOM and other monitoring stuff in place. So I am trying to address few issues I am going to list below and how I try to mitigate them, first one on the list is how to get visibility into prod, how to provision those access to the BizTalk resources with minimal activity and how can we take advantage of the resources we have today. So I was working on creating REST data services for BizTalk RFID a year ago and available on codeplex. I thought to extend that idea to take advantage of BizTalk Data Services available in codeplex. I extended the BizTalk data services I will upload the updated service soon. So let me start thru how my solution works, so first step I am using the BizTalk data service (REST service) which expose most of the BizTalk artifacts as resources such as Applications, Orchestrations, Send ports, Receive ports, Host instances and In process instances etc. BizTalk Server Monitoring – SharePoint Web Part I am hosting the BizTalk data service in IIS with application pool configured to run under BizTalk administrator credentials. So with this setup I am making the service to make accessible anonymous. Next step of this solution I have created a SharePoint Visual web part which consumes the BizTalk data service and display all the BizTalk Application and Platform settings in read only mode. Even though BizTalk data services offers to browse resources as well perform actions like starting, stopping Orchestrations, Send ports, Receive locations, Host instances etc. Host Instances BizTalk Applications BizTalk Running / Suspended Instances So having this BizTalk Monitoring SharePoint web part, will be added to the SharePoint. This eliminates the need for granting access to the BizTalk users explicitly, so when you have BizTalk contractor or BizTalk application user need to have access to the BizTalk environment all the need is have access to the SharePoint website. You can configure the web part point to different end point based on your environment. I am making this as read only as part of this to make easier for the users and in terms of provisioning. This removes the dependency of BizTalk admin at least for viewing the BizTalk application status and errors etc. If we need to make any changes to the BizTalk application then its application owner responsibility to co-ordinate with BizTalk admins. There are options like BizTalk ESB portal, BizTalk 360 etc… but this one of the approach to reduce number of steps required to give access to BizTalk application users and also to maximize the resource we have in enterprise today. Also you can expose this data service thru Azure Service Bus and access from other apps like mobile devices or create a web site hosted in Azure etc. One last thing I have tested only with BizTalk Server 2010 on x64 VM only, but it should work on other version. I will try to upload the code shortly with instructions how to setup etc.… I welcome thoughts and suggestions… Hope this helps….

  Read the article

• Install Problem (Ubuntu Server 10.04) with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option! Help

  - by Alastair

  We cannot seem to install Ubuntu Server with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option. My friend wants to try setting up a server so; we downloaded Ubuntu Server 10.04.4 we created a boot CD and installed ubuntu server no problem at all. But then the problem arose the hardrive we wanted to use is a 1tb sata drive and the computer orginally has 40gb IDE. So I bought a Sata to IDE and IDE to Sata converter from: http://www.microdirect.co.uk/Home/Product/52926/IDE-to-SATA-converter---Converts-IDE-HDD-to-SATA-inc-sata-data-and-power-cables Unfortunately this converter means I cannot plug in the IDE cable meaning I only have one IDE connection i.e CD drive has to be disconnected for the 1tb sata Hardrive to be connected. So now the 1tb drive is connected, powered it on opened the bios to make sure the hdd appeared it did as ST3ASDAPFKG (somthing like that). Fortunately the computer supports USB booting, so I read ubuntu server usb install instructions I tried: Startup Disk Creator & Unebootin Startup Disk Creator made the usb bootable with the 'ubuntu-10.04.4-server-i386.iso' All looked fine stuck the usb drive in, booted the machine up and I am quickly presented with ubuntu language choice. I hit enter to select English then I am presented with: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system I can move up and down the menu fine everything seems ok, I select 'Install Ubuntu Server', computer just hangs and screen either goes blank or locks. So I rebooted the computer loads the same menus fine, I select 'Install Ubuntu Server' hit 'enter' and the computer just restarts then brings me back to the same menu. hmmm Then I tried choosing the rest of the options separately: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system computer just restarts and back to the same ubuntu menu every-time. Grrrr At this point I wish I actually new how to command line install or something but I don't have a clue how to do that. So I tried hitting 'f6' for 'other options' and I tried them all in various combinations and individually. No Luck: (Expert mode, acpi=off, noapic, nolapic, edd=on, nodmraid, nomodeset, Free Software only) At this point I am wondering if it is a bios setting causing problems, I tried turning every option in there on off that I don't understand. No Luck. I then discovered by accident if you hit esc in the ubuntu install menu it says "you are leaving the graphical boot menu and starting the text mode interface" I hit 'Ok'. Next a prompt pops up saying 'boot:' One time it responded when I typed somthing with 'Cannot find kernal image (something like that but since then it just restarts when I hit enter in that prompt). I had a browse on the net and found someone suggesting removing quiet from install command for 'Install Ubuntu Server'. Made no difference at all just reboots... Orginal boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- Modified boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz -- Still I cannot install Ubuntu Server by USB as it, reboots when I hit 'enter' for 'Install Ubuntu Server' option. This is a real pain as we cannot take the 1tb Sata Hardrive and swap it for IDE to be able to use the cd drive. Why is is it so hard to install ubuntu server with usb? I have wasted a full day and half on this really frustrated any help would be amazing! I know the answers out there just seems a bit illusive at the moment! Computer Spec- Asus Motherboard, 1gb RAM 2X512MB, Powersupply 200watt, 2.8ghz Processor Intel, On-board 64mb graphics, 100mb Ethernet, 54mb Wireless,

  Read the article

• Silverlight Cream for December 16, 2010 -- #1011

  - by Dave Campbell

  In this Issue: John Papa, Tim Heuer, Jeff Blankenburg(-2-, -3-), Jesse Liberty, Jay Kimble, Wei-Meng Lee, Paul Sheriff, Mike Snow(-2-, -3-), Samuel Jack, James Ashley, and Peter Kuhn. Above the Fold: Silverlight: "Animation Texture Creator" Peter Kuhn WP7: "dows Phone from Scratch #13 — Custom Behaviors Part II: ActionTrigger" Jesse Liberty Shoutouts: Awesome blog post by Jesse Liberty about writing in general: Ten Requirements For Tutorials, Videos, Demos and White Papers That Don’t Suck From SilverlightCream.com: 1000 Silverlight Cream Posts and Counting! John Papa has Silverlight TV number 55 up and it's an inverview he did with me the day before the Firestarter in December... thanks John... great job in making me not look stooopid :) Silverlight service release today - 4.0.51204 Tim Heuer announced a service release of Silverlight ... check out his blog for the updates and near the bottom is a link to the developer runtime. What I Learned In WP7 – Issue #3 Jeff Blankenburg has been pushing out tips ... number 3 consisted of 3 good pieces of info for WP7 devs including more info about fonts and a good site for free audio files What I Learned In WP7 – Issue #4 In number 4, Jeff Blankenburg talks about where to get some nice free WP7 icons, and a link to a cool article on getting all sorts of device info What I Learned In WP7 – Issue #5 Number 5 finds Jeff Blankenburg giving up the XAP for a CodeMash sessiondata app... or wait for it to appear in the Marketplace next week. Windows Phone from Scratch #13 — Custom Behaviors Part II: ActionTrigger Wow... Jesse Liberty is up to number 13 in his Windows Phone from scratch series... this time it's part 2 of his Custom Behaviors post, and ActionTriggers specifically. Solving the Storage Problem in WP7 (for CF Developers) Jay Kimble has released his WP7 dropbox client to the wild ... this is cool for loading files at run-time... opens up some ideas for me at least. Building Location Service Apps in Windows Phone 7 Wei-Meng Lee has a big informative post on location services in WP7... getting a Bing Maps API key, getting the data, navigating and manipulating the map, adding pushpins... good stuff Using Xml Files on Windows Phone Paul Sheriff is discussing XML files as a database for your WP7 apps via LINQ to XML. Sample code included. ABC–Win7 App Mike Snow has been busy with Tips of the Day ... he published a children's app for tracing their ABC's and discusses some of the code bits involved. Win7 Mobile Application Bar – AG_E_PARSER_BAD_PROPERTY_VALUE Mike Snow's next post is about the infamous AG_E_PARSER_BAD_PROPERTY_VALUE error or worse in WP7 ... how he got it, and how he fixed it... could save you some hair... Forward Navigation on the Windows Phone Mike Snow's latest post is about forward navigation on the WP7 ... oh wait... there isn't any... check out the post. Day 2 of my “3 days to Build a Windows Phone 7 Game” challenge Samuel Jack details about 9 hours in day 2 of his quest to build an XNA app for WP7 from a cold start. Windows Phone 7 Side Loading James Ashley has a really complete write-up on side-loading apps onto your WP7 device. Don't get excited... this isn't a hack... this is instructions for side-loading using the Microsoft-approved methos, which means a registered device. Animation Texture Creator Remember Peter Kuhn's post the other day about an Animation Texture Creator? ... well today he has some added tweaks and the source code! ... thanks Peter! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• wcf http 504: Working on a mystery

  - by James Fleming

  Ok,  So you're here because you've been trying to solve the mystery of why you're getting a 504 error. If you've made it to this lonely corner of the Internet, then the advice you're getting from other bloggers isn't the answer you are after. It wasn't the answer I needed either, so once I did solve my problem, I thought I'd share the answer with you. For starters, if by some miracle, you landed here first you may not already know that the 504 error is NOT coming from IIS or Casini, that response code is coming from Fiddler. HTTP/1.1 504 Fiddler - Receive Failure Content-Type: text/html Connection: close Timestamp: 09:43:05.193 ReadResponse() failed: The server did not return a response for this request.       The take away here is Fiddler won't help you with the diagnosis and any further digging in that direction is a red herring. Assuming you've dug around a bit, you may have arrived at posts which suggest you may be getting the error because you're trying to hump too much data over the wire, and have an urgent need to employ an anti-pattern: due to a special case: http://delphimike.blogspot.com/2010/01/error-504-in-wcfnet-35.html Or perhaps you're experiencing wonky behavior using WCF-CustomIsolated Adapter on Windows Server 2008 64bit environment, in which case the rather fly MVP Dwight Goins' advice is what you need. http://dgoins.wordpress.com/2009/12/18/64bit-wcf-custom-isolated-%E2%80%93-rest-%E2%80%93-%E2%80%9C504%E2%80%9D-response/ For me, none of that was helpful. I could perform a get on a single record  http://localhost:8783/Criterion/Skip(0)/Take(1) but I couldn't get more than one record in my collection as in:  http://localhost:8783/Criterion/Skip(0)/Take(2) I didn't have a big payload, or a large number of objects (as you can see by the size of one record below) - - A-1B f5abd850-ec52-401a-8bac-bcea22c74138 .biological/legal mother This item refers to the supervisor’s evaluation of the caseworker’s ability to involve the biological/legal mother in the permanency planning process. 75d8ecb7-91df-475f-aa17-26367aeb8b21 false true Admin account 2010-01-06T17:58:24.88 1.20 764a2333-f445-4793-b54d-1c3084116daa So while I was able to retrieve one record without a hitch (thus the record above) I wasn't able to return multiple records. I confirmed I could get each record individually, (Skip(1)/Take(1))so it stood to reason the problem wasn't with the data at all, so I suspected a serialization error. The first step to resolving this was to enable WCF Tracing. Instructions on how to set it up are here: http://msdn.microsoft.com/en-us/library/ms733025.aspx. The tracing log led me to the solution. The use of type 'Application.Survey.Model.Criterion' as a get-only collection is not supported with NetDataContractSerializer.  Consider marking the type with the CollectionDataContractAttribute attribute or the SerializableAttribute attribute or adding a setter to the property. So I was wrong (but close!). The problem was a deserializing issue in trying to recreate my read only collection. http://msdn.microsoft.com/en-us/library/aa347850.aspx#Y1455 So looking at my underlying model, I saw I did have a read only collection. Adding a setter was all it took.         public virtual ICollection<string> GoverningResponses         {             get             {                 if (!string.IsNullOrEmpty(GoverningResponse))                 {                     return GoverningResponse.Split(';');                 }                 else                     return null;             }                  } Hope this helps. If it does, post a comment.

  Read the article

• Silverlight Cream for May 08, 2010 -- #858

  - by Dave Campbell

  In this Issue: Phil Middlemiss, Jaime Rodriguez, Senthil Kumar, Mike Snow, DaveDev, Gergely Orosz, Kirupa, Cheryl Simmons, András Velvárt, Dan Wahlin, Michael D. Brown, and Ben Rush. Shoutouts: Erik Mork and crew have their latest up: This Week In Silverlight – Where’s the Tablet? Chris Rouw has a good link post and instructions on WCF RIA services: Deploying and Configuring Silverlight 4 and WCF RIA Services From SilverlightCream.com: Quick and Easy Sscalable Rounded Bevels Phil Middlemiss duplicates some bevel-edged rectangles in Blend, and they look great. Now you don't have to import all the other PhotoShop bits to get those things looking the way you want! A transparent Windows PHONE FAQ Jaime Rodriguez combined a bunch of information into a WP7 FAQ that he's going to keep up to date, so bookmark the page. He also has links to the Training Kit, on and offline versions. Windows Phone Developer Training Kit April Refresh is now available for Download Thanks to Senthil Kumar, I found out there is an April refresh of the WP7 Training kit at Channel 9 -- go get yours now --- I'll still be here when you get back! Silverlight Tip of the Day #16 – Working with IgnoreImageCache Mike Snow's Tip of the day #16 covers IgnoreImageCache and like many other things in life, until you read Mike's post you may be surprised at how it works. DoodlePad – A fun, free, sketching application for Windows Phone 7 DaveDev has a new WP7 App up that lets you or your kids 'Doodle' on the phone... could be a note, or could be a drawing... good post with all the links you need to get this cranked up on the emulator. Printing in Silverlight: Printing Charts and Auto Scaling Gergely Orosz's latest post is a very useful one on auto-scaling charts to fit a printed page and then getting them to print. Smoothly Scrolling a ListBox Check out the smooth scrolling Kirupa has on the ListBox near the top of his post... all good stuff... you wanna know how to do that! Plus... it's dead simple and all in Blend :) http://www.sparklingclient.com/wheres-the-silverlight-tablet/ Cheryl Simmons has a great tip up at the SilverlightSDK if you haven't burned through to figure it out yet ... changing the watermark on a DatePicker control... looks great! The story of a wicked bug András Velvárt tells a story of a bug that just defied logic or being found. Read how he tracked it down and what it actually was... could save you some time. Story learned: if I have a problem that bad, I'm calling András :) Text Trimming in Silverlight 4 Dan Wahlin gives a quick run-through of what TextBox trimming is, and then by a good real example... check it out and start using it in your projects. Enterprise Patterns with WCF RIA Services Michael D. Brown has an article in MSDN Magazine on RIA Services. Great information and link-packed article, with all the source avialable for download. Building Custom Players with the Silverlight Media Framework Ben Rush has a nice long tutorial on the Silverlight Media Framework up on the MSDN Magazine site ... lots of information in there. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• PHP Web Services - Nice try

  Thanks to the membership in the O'Reilly User Group Programme the Mauritius Software Craftsmanship Community (short: MSCC) recently received a welcome package with several book titles. Among them is the latest publication of Lorna Jane Mitchell - 'PHP Web Services: APIs for the Modern Web'. Following is the book review I put on Amazon: Nice try! Initially, I was astonished that a small book like 'PHP Web Services' would be able to cover all the interesting topics about APIs and Web Services, independently whether they are written in PHP or not. And unfortunately, the title isn't able to stand up to the readers (or at least my) expectations. Maybe as a light defense, there is no usual paragraph about the intended audience of that book, but still I have to admit that the first half (chapters 1 to 8) are well written and Lorna has her points on the various technologies. Also, the code samples in PHP are clean and easy to understand. With chapter 'Debugging Web Services' the book started to change my mind about the clarity of advice and the instructions on designing and developing good APIs. Eventually, this might be related to the fact that I'm used to other tools since years, like Telerik Fiddler as HTTP proxy in order to trace and inspect any kind of request/response handling. Including localhost monitoring, SSL certification acceptance, and the ability to debug mobile devices, especially iOS-based ones. Compared to Charles, Fiddler is available for free. What really got me off the hook is the following statement in chapter 10 about Service Type Decisions: "For users who have larger systems using technology stacks such as Java, C++, or .NET, it may be easier for them to integrate with a SOAP service." WHAT? A couple of pages earlier the author recommends to stay away from 'old-fashioned' API styles like SOAP (if possible). And on top of that I wonder why there are tons of documentation towards development of RESTful Web Services based on WebAPI. The ASP.NET stack clearly moves away from SOAP to JSON and REST since years! Honestly, as a software developer on the .NET stack this leaves a mixed feeling after all. As for the remaining chapters I simply consider them as 'blah blah' without any real value and lots of theoretical advice. Related to the chapter 13 about 'Documentation', I just had the 'pleasure' to write a C#-based client against a Java-based SOAP Web Service. Personally, I take the WSDL as the master reference in the first place and Visual Studio generates all the stub types involved in the communication. During the implementation and testing I came across a 'java.lang.NullPointerException' in various methods and for various method parameters. The WSDL and the generated types were declared as Nullable, so nothing to worry about, or? Well, I logged in a support ticket, and guess what was the response to that scenario? "The service definition in the WSDL is wrong, please refer to the documentation in order to use the methods and parameters correctly" - No comment! Lorna's title is a quick read and in some areas she has good advice on designing and implementing Web Services and APIs. But roughly 100 pages aren't enough to cover a vast topic like that. After all, nice try and I'm looking forward to an improved second edition. Honestly, I never thought that I would come across a poor review. In general, it's a good book but it clearly has a lack of depth, the PHP code samples are incomplete (closing tags missing), and there are too many assumptions and theoretical statements.

  Read the article

• October 2012 Critical Patch Update and Critical Patch Update for Java SE Released

  - by Eric P. Maurice

  Hi, this is Eric Maurice. Oracle has just released the October 2012 Critical Patch Update and the October 2012 Critical Patch Update for Java SE.  As a reminder, the release of security patches for Java SE continues to be on a different schedule than for other Oracle products due to commitments made to customers prior to the Oracle acquisition of Sun Microsystems.  We do however expect to ultimately bring Java SE in line with the regular Critical Patch Update schedule, thus increasing the frequency of scheduled security releases for Java SE to 4 times a year (as opposed to the current 3 yearly releases).  The schedules for the “normal” Critical Patch Update and the Critical Patch Update for Java SE are posted online on the Critical Patch Updates and Security Alerts page. The October 2012 Critical Patch Update provides a total of 109 new security fixes across a number of product families including: Oracle Database Server, Oracle Fusion Middleware, Oracle E-Business Suite, Supply Chain Products Suite, Oracle PeopleSoft Enterprise, Oracle Customer Relationship Management (CRM), Oracle Industry Applications, Oracle FLEXCUBE, Oracle Sun products suite, Oracle Linux and Virtualization, and Oracle MySQL. Out of these 109 new vulnerabilities, 5 affect Oracle Database Server.  The most severe of these Database vulnerabilities has received a CVSS Base Score of 10.0 on Windows platforms and 7.5 on Linux and Unix platforms.  This vulnerability (CVE-2012-3137) is related to the “Cryptographic flaws in Oracle Database authentication protocol” disclosed at the Ekoparty Conference.  Because of timing considerations (proximity to the release date of the October 2012 Critical Patch Update) and the need to extensively test the fixes for this vulnerability to ensure compatibility across the products stack, the fixes for this vulnerability were not released through a Security Alert, but instead mitigation instructions were provided prior to the release of the fixes in this Critical Patch Update in My Oracle Support Note 1492721.1.  Because of the severity of these vulnerabilities, Oracle recommends that this Critical Patch Update be installed as soon as possible. Another 26 vulnerabilities fixed in this Critical Patch Update affect Oracle Fusion Middleware.  The most severe of these Fusion Middleware vulnerabilities has received a CVSS Base Score of 10.0; it affects Oracle JRockit and is related to Java vulnerabilities fixed in the Critical Patch Update for Java SE.  The Oracle Sun products suite gets 18 new security fixes with this Critical Patch Update.  Note also that Oracle MySQL has received 14 new security fixes; the most severe of these MySQL vulnerabilities has received a CVSS Base Score of 9.0. Today’s Critical Patch Update for Java SE provides 30 new security fixes.  The most severe CVSS Base Score for these Java SE vulnerabilities is 10.0 and this score affects 10 vulnerabilities.  As usual, Oracle reports the most severe CVSS Base Score, and these CVSS 10.0s assume that the user running a Java Applet or Java Web Start application has administrator privileges (as is typical on Windows XP). However, when the user does not run with administrator privileges (as is typical on Solaris and Linux), the corresponding CVSS impact scores for Confidentiality, Integrity, and Availability are "Partial" instead of "Complete", typically lowering the CVSS Base Score to 7.5 denoting that the compromise does not extend to the underlying Operating System.  Also, as is typical in the Critical Patch Update for Java SE, most of the vulnerabilities affect Java and Java FX client deployments only.  Only 2 of the Java SE vulnerabilities fixed in this Critical Patch Update affect client and server deployments of Java SE, and only one affects server deployments of JSSE.  This reflects the fact that Java running on servers operate in a more secure and controlled environment.  As discussed during a number of sessions at JavaOne, Oracle is considering security enhancements for Java in desktop and browser environments.  Finally, note that the Critical Patch Update for Java SE is cumulative, in other words it includes all previously released security fixes, including the fix provided through Security Alert CVE-2012-4681, which was released on August 30, 2012. For More Information: The October 2012 Critical Patch Update advisory is located at http://www.oracle.com/technetwork/topics/security/cpuoct2012-1515893.html The October 2012 Critical Patch Update for Java SE advisory is located at http://www.oracle.com/technetwork/topics/security/javacpuoct2012-1515924.html.  An online video about the importance of keeping up with Java releases and the use of the Java auto update is located at http://medianetwork.oracle.com/video/player/1218969104001 More information about Oracle Software Security Assurance is located at http://www.oracle.com/us/support/assurance/index.html  

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >