Search Results

Search found 6052 results on 243 pages for 'manage'.

Page 109/243 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• DNS Server (2008 r2) MMC The server DC01 could not be contacted. The error was: Access was denied

  - by Silviu-Ionut Radu

  I've just migrated the AD with the whole nine yards, FSMO, PDC, RID, Schema, etc, from an SBS 2003 to a Win 2008 R2 Std. I have managed to have no error in the dcdiag before I demoted the SBS 2003 from the AD, fsmocheck, conectivity, advertising, dns, etc. The SBS 2003 demoted successfully. After this step I have restarted both, the old SBS and the new Win 2008 r2. After restart the new DC (which is the GC) started with an Access denied to the DNS Server MMC, actually it is looking like I would try to connect to the 2008 r2 DNS server from an older server console I can NOT manage DNS server through MMC nor through dnscmd (Command failed: ERROR_ACCESS_DENIED 5 0x5) I cannot even use the Action Option from the DNS Server MMC because all the options are DISABLED but for "Launch nslookup". I've made a lot of research on the internet but no luck, yet. So I come to ask for help. Thank you very much.

  Read the article

• Using old RAID configured disk after new disk has been used in the controller

  - by Narendra

  I have Dell Poweredge T100 server with Dell SAS 6 and two hard disk on RAID 1. Last week the server died including one RAID 1 hard disk. We sent the server for repair and the problem with PSU was fixed. But the repair guys also checked the RAID controller by configuring new RAID with their test hard disk. Now if I install one working RAID 1 disk and one new disk, will the RAID controller let me continue my old RAID 1 and resync the new disk and continue? What I fear is the RAID controller will want the test hard from repair guys. Thus I have to re configure RAID 1 forcing me to wipe the working disc. If so, I've to backup the working disc, reconfigure RAID 1 and reinstall? Or is there better way? Note: I'm using DELL SAS confiugratio utility to manage RAID. (Press CTRL+C after BIOS)

  Read the article

• Make 2 virtual machines ping in virtual box

  - by darkheir

  I'm trying to make 2 virtual machines communicate in Virtual Box, but whitout any success. Here are the step I have done: I setted both VMs in Internal networking mode (using VBoxManage modifyvm "VM name" --nic<x> intnet) I setted the DHCP server that is built into VirtualBox to manage IP addresses :VBoxManage dhcpserver add --netname intnet --ip 10.13.13.100 --netmask 255.255.255.0 --lowerip 10.13.13.101 --upperip 10.13.13.254 --enable But then both of the VM have the same IP Adresse (10.13.13.101) and even if set the IP manually, the Virtual Machines are not pinging each other.

  Read the article

• MongoDB on FreeBSD

  - by Hartator

  We are currently using MongoDB 2.0.0 on MacOS but our servers are running FreeBSD. The most recent port of MongoDB is the 1.8.3 version. I have tried to compile the 2.0.0 by hand but I came across errors that I didn't manage to fix. I came across on the Internet a few old resources which are saying that MongoDB does not run well on FreeBSD mainly for performance issue (memory mapped files). Is that true ? Does it mean we have to switch our server to another OS ? Thanks for your opinions! Sources : http://groups.google.com/group/mongodb-user/browse_thread/thread/8131b7e5a5c710d9 http://ivoras.net/blog/tree/2009-11-05.a-short-time-with-mongodb.html

  Read the article

• What are some good, IP Address Management solutions for IPv6? [closed]

  - by Russell Heilling

  There are a number of open source IPAM tools available for IPv4 address management; however there seems to be a distinct lack of actively updated tools available for IPv6. Other than FreeIPdb (code no longer maintained) or the RIPE Database (I have seen some customisations to the RIPEdb that allow for enterprise/ISP IPAM but it seems like overkill for a system that will probably only ever handle one /32 worth of space). Are there any other options that I'm missing? (Database only please. I know vi can be used for flat text IPAM, that's how I'm handling our /32 at the moment, but I don't see it scaling for much longer) It doesn't have to be open source but what are folks doing to manage IPv6 in a dual stack environment

  Read the article

• Postfix/dovecot remove LDAP user

  - by dove221

  I have to remove or blacklist an LDAP/dovecot user. The authentication is setup from active directory what I cannot manage so I thought there should be a way at least to disable this specific user on the mailserver locally. # Virtual Accoutns - LDAP - MS AD virtual_mailbox_maps = ldap:/etc/postfix/ldap_mailbox_maps.cf virtual_alias_maps = ldap:/etc/postfix/ldap_alias_maps_redirect_true.cf ldap:/etc/postfix/ldap_alias_maps_redirect_false.cf ldap:/etc/postfix/ldap_mailbox _groups.cf virtual_mailbox_domains = domain.com virtual_uid_maps = static:1000 virtual_gid_maps = static:1000 virtual_transport = dovecot dovecot_destination_recipient_limit = 1 Anybody knows how to do it? I followed this guide for disabling 1 user through postfixes access file: http://www.cyberciti.biz/faq/howto-blacklist-reject-sender-email-address/ Unfortunately it doesn't work. It's like the settings stored in LDAP are overruling the access rule. Instead of postfix rejecting the mail it keeps accepting it. Thanks!

  Read the article

• What's a good way for organizing PDF documents on windows?

  - by Ivan

  I'm looking for a good way to manage a lot of pdf documents (e.g. papers, ebooks) on windows. Ideally I'm looking for a windows version of the great mac app Yep. I've looked quite a bit and haven't found any windows app that provides and organized overview of your pdf documents. I've considered just tagging the pdf files, but there don't seem to be any apps to simply tag and search tagged files easily. I've found TaggedFrog, but the tags are kept in the app's internal DB and are associated with the filename. So if you move/rename a file it looses all its tags. In a nutshell: Is there a good windows app to organize/efficiently tag files?

  Read the article

• What is the best policy for user account on a Windows 7 Media Center shared by the whole family

  - by Matt Spradley

  What is a good way to manage user accounts for a Windows 7 Media Center PC that is part of an entertainment center for a family? Each family member keeps most of their personal stuff on their own computer. I was thinking the simple approach would be to create an admin account for management and then just create a "Family" user account w/o a password that is the default account used by the media center. This account would be used for the PVR, playing blu rays, music, etc. I don't think it is practical for someone to have to log in every time they use the media center.

  Read the article

• Vim - dynamic list of open buffers in a window

  - by asfallows

  I've investigated a few ways to maintain a list of open buffers in Vim, and some of them are very good, but none of them seem to behave the way I'd like. It's very possible that nothing like what I want exists, and it can't hurt to ask. I've been using NERDTree in GVim, and I like the idea of putting the information in a slender left-hand window. I've put together a handy diagram for how I'd like my environment to look: |--------|---------------------------------------| | | | | | | |NERDTree| Windows | | | | | | | | | | |--------| | | | | | | | | List | | | of | | | Open | | | Buffers| | | | | | | | |--------|---------------------------------------| So my question is: Is there a vim-native or plugin-enabled way to maintain a list of currently open buffers and select/edit/close from that list, inside a window similar to NERDTree? I understand that this approach may be incongruous with the Vim way of doing things, and if you feel like I'm missing something about how to manage multiple files in a Vim session, please leave a comment with suggestions!

  Read the article

• Subversion for web designer: repository on a network share and ftp to the live server?

  - by ceatus

  My configuration: htdocs on a windows network share (z:) web developers check out with dreamweaver modify and check in back to the drive z LAMP running on a Ubuntu server virtualized on Hyper-V with apache that point on the z drive for dev in order to test the websites Upload by FTP on the live server Now: I need multiple access to the repository, keep them on a network shares and we manage about 200 websites. All the web developers, administrators and IT need to access to the share. I found out that creating a svn server is the best way for me, so I created it on a Ubuntu Server which is virtualized on Hyper-V. Right now I have the repos local on the Ubuntu Server but I'd like them on my network drive and I'd like to have a post-commit, if possible, in order to ftp directly on my live server. Do you guys think that a WebDav solution would be better? Thanks in advance Angelo

  Read the article

• Tidying up old apache logs managed by vlogger

  - by Andre Lackmann

  We're using vlogger to manage our apache logs which keeps everything nice and neat but pretty much breaks the ability to use logrotate from as far as I can see. eg. our virtual access.logs each sit within their own dir and are named similar to: /virtual.com/ 20100501-access.log 20100502-access.log 20100503-access.log 20100504-access.log etc.. Has anyone created a cleanup script to go through the /var/log/httpd/ sub dirs and remove old logs? We like using vlogger, but cleaning up olds logs after it is a pain!

  Read the article

• When send a meeting invite to a specific user, you get a undeliverable response back from another us

  - by jherlitz

  We have a user, where it doesn't matter who sends it, but if you send her a meeting invite through outlook (exchange 2007), you get a non-deliverable message back from another user. Same one all the time though. I checked her shared calendar properties and removed the user from the list. I checked and made sure she wasn't using cache mode. I checked the manage full permissions and send permissions within exchange and the user is not listed. What am I missing? Notes: Using Outlook 2007 with Exchange 2007 on a XP box and Server 2008.

  Read the article

• How can I access an Apple Xserve with no I/O ports

  - by DigitalJedi805

  I have an Apple Xserve at my place of employment, that I stumbled across one day going through some old equipment. The Xserve has one card installed on it, being the NIC, and is labelled with the static IP adresses that it has assigned, but other than that it is totally 'headless'. I would like to put it to use ( by either rolling it over to a Linux, or Windows Server 08 environment... 0_o ) but have yet to figure out how to get into the system to manage it. I'm a frequent at StackOverflow, but this is my first SuperUser post, so please let me know if this should be on one of the affiliate sites.

  Read the article

• How to make a vm scale when demand for resource increases

  - by Cray XT3

  i am having a server with 16 virtual core and 24G RAM,using Xen virtualization and ubuntu as dom0 Created 4 VMs (in para mode),each with different applications. CPU Load vary on each vm,somtimes first vm reaches nearly 100% CPU and others under 25% or even less. So is there a way in which vm can get cpu from other vms when they are not actually using it or utilization is under 25%.Same in the case of RAM also. I am not sure whether i am mentioning Cloud here. Initially i would like to give every vm a single VCPU,but can scale up to 8 or more by taking cpu from other vms if they are not using it. Is there any kind of tool that makes vm to scale its resources when demand increases. Is cloudstack and openstack designed for these kind of purpose or is that just a GUI to manage VMs.

  Read the article

• bigbluebutton or openmeetings?

  - by Adam Monsen

  I want to set up a server for small group meetings. I'm looking for features like audio conferencing, multi-point video, screen sharing... stuff like that. I'm familiar/comfortable administering Ubuntu servers, so for this task I'd likely fire up a small EC2 server running Ubuntu. I'm most interested in using FLOSS. I see there are at least a couple of options out there. For example: bigbluebutton and openmeetings. Anyone installed either (or a different one) and have recommendations/tips? If yes, have you ever upgraded same? I notice bigbluebutton has deb packages, so that might be pretty straightforward. openmeetings appears to support logging in with a facebook account; that might be a good way to avoid having to manage logins.

  Read the article

• Connecting to FileZilla FTP Server on XAMPP localhost with Dreamweaver

  - by Keyslinger

  I am running XAMPP 1.7.4. I've installed the FileZilla FTP server and I'm running it as a service. I created a user and when I connect as that user with the FileZilla client, I have no trouble connecting. However, in Dreamweaver CS5 when I create a site using the Manage Sites dialog and go to configure its FTP settings, I get a message that reads An FTP error occurred - cannot make connection to host. and goes on to list some possible causes and solutions. I have tried setting the connection as passive to no avail. I understand that it is not necessary to use FTP when I am editing the site locally, but it is for a Dreamweaver class I am teaching and I want my students to learn to use Dreamweaver's FTP tools. How can I make my localhost FTP connection work in Dreamweaver?

  Read the article

• Windows bios fails to boot up, keeps resetting

  - by Dwayne Diamond

  When I turn the computer on this error always happens wher jus after it starts up this screen pops up wher it says F1 to enter BIOS setup or F2 to start Windows Normally and if I press F2 it goes into Windows but freezez then I hav 2 turn the pc off, Problem is the BIOS + Date and Time keeps resetting itself somehow and it's not the battery because I put a new one in so when I manage 2 load default settings and get it working after some struggle and I shut down the pc the next day I switch the pc on and does the whole process again... What could this problem be and how can I fix it??? Thank you

  Read the article

• For Loop counting from 1 to n in a windows bat script

  - by raoulsson

  I need to run a windows command n times within a bat script file. I know how to do this in various programming languages but cannot manage to get it right on the windows command line :-( I would expect something like either for(int i = 0; i < 100; i++) { // do something } or even this (though not entirely seriously) 1.upto(100, { // do something }) Thanks! EDIT I can write a program in java, perl, c or whatever that will generate a bat script that looks like this for %%N in (1 2 3 4 5 6 7 8 9 10 11 12) do echo %%N and so on. Or even "better": echo 1 echo 2 echo 3 echo 4 echo 5 echo 6 echo 7 echo 8 echo 9 echo 10 echo 11 echo 12 and then execute it... But the thing is that I need a concise way to specify a range of numbers to iterate through within the script. Thanks!

  Read the article

• Creating a new Active Directory account with an InfoPath form

  - by ryan

  I am setting up a business partner portal in our Sharepoint server. There will be an AD group with permissions limited to viewing and possibly contributing to the specific business partner site and employees of our business partners will have accounts created for them as needed. Now we would like to let our business development group(BDG) have control over the partner accounts. Ideally they should be able to add and delete accounts and change permissions on them. The BDG are not domain admins so we don't want to give them access to the domain controller. We want to create an Infopath form that will allow them to do all this. Is it possible to create and manage AD accounts from within an Infopath form on the sharepoint server? I searched this site and MSDN and can not find anything specifically related to my question.

  Read the article

• Speeding up Connection Between Computer and Wireless/Bridged Router

  - by Justian Meyer

  Hey everyone, I looked through other questions, but didn't find useful responses. Our main computer has a dl speed of 6 Mbps, but some of our other computers are getting only 40-200 Kb! The router is wireless, but all computers are connected using a Netgear Wall-Plugged Bridge XE102, which transmits information via the building's powerline. It can't be the hardware itself, however, because some computers still manage decent speeds. The computers afflicted are running on Microsoft XP Service Packs 2 and 3, but so are computers that are totally functional. These speeds severely impede on productivity and are excruciatingly frustrating when trying to cram in time in the early hours. Could it be an issue with the computer? Location? Router? Many thanks in advance, Justian

  Read the article

• Script to set "Hide file extensions"

  - by Ickster

  I'm tired of the multi-step process to set my preferred folder options on every server to which I log on (Mostly Win2008, but also some 2012 and Win7 here and there). I'd love to be able to script the process, but unfortunately, I can't find any commands or extensions to do so for folder options. There are several settings I'd like to change, but in particular, I'd like to set "Hide file extensions for known file types" to false. I figure that if I can do that, I'll be able to manage any additional settings on my own. Methods that work on the vanilla command line would be preferred, but if there are commands in PowerShell, I'll use that.

  Read the article

• Web application design with distributed servers

  - by Bonn

  I want to build a web application/server with this structure: main-server sub-server transaction-server (create, update, delete) view-server (view, search) authentication-server documents-server reporting-server library-server e-learning-server The main-server acts as host server for sub-server. I can add many sub-servers and connect it to main-server (via plug-play interface maybe), then it can begin querying data from another sub-servers (which has been connected to the main-server). The sub-servers can be anywhere as long as connected to internet. The main-server can manage all sub-servers which are connected to it (query data, setting permission between sub-servers, etc). The purpose is simple, the web application will be huge as the company grows, so I want to distribute it into small connected plug-able servers. My question is, does the structure above already have a standardized method? or are there any different views? what are the technologies needed? I need a lot of researches before the execution plan begin. thanks a lot.

  Read the article

• Localized database for customers

  - by Jim

  The company I work for, has just moved to AWS - and currently they have one very large central database with the instance currently located in America. However, one of their clients has requested that all of their data is held in the EU. So creating an AWS instance in Ireland isn't a problem, the problem is the database and how to manage it. We were considering having another database that runs in the EU for European customers, and use a different primary key step, so that the primary keys will never conflict in case the two locations need to be merged in the future. The problem is, if we have a customer that uses our system in both America, and the EU we would have to create 2 accounts for that user, and reporting across both regions would not be possible as the connection time would be too high. Is there an alternative to set this up?

  Read the article

• Converge Voice and Data networks using Sonicwall

  - by skinneejoe

  We are looking to converge VOIP and Data traffic onto a single wire so that our client's VOIP phones pass data through to the users computer. We are specing out a new Sonicwall NSA appliance to handle routing functions and layer 2 switches to manage VLANS. Not a huge network, medium sized. What should I know about converging the networks onto a single wire? Obviously I'll want to prioritize voice traffic, is this handled solely in the Sonicwall with QoS configurations or do the layer 2 switches need to be configured differently? Any other pitfalls I should be aware of, or any good resources for learning more?

  Read the article

• Full Access user removed from NTFS Share

  - by TJ

  I don't know how it happened but for some reason one of the sub folders in the Network shares (call the share Market and the sub folder Support) no longer has any groups or users with full permissions on the share. The Market top level has users and groups with these permissions and everything is set up for folder inheritance but it's not inheriting permissions from the top level and only has modify permissions for the single group that is in the Access List for the sub folder Support. I can see items in the sub folder but I can not add, edit, or delete permissions to the Support folder. What are my options so I can once again manage permissions?

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >