Search Results

Search found 6972 results on 279 pages for 'usb sata'.

Page 109/279 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• Windows 7 DVD doesn't boot up, neither does USB. :'(

  - by Manan Shah

  My problem is that i'm not able to install windows 7. Been trying to install this since past 1 week. The methods i've tried are: I have a windows 7 bootable DVD which doesnt boot up. (I've set BIOS to boot from DVD ROM first but it just won't boot from the DVD). Tried to install Windows 7 from the same DVD to a friend's PC and it worked. So the DVD has no issues. I tried to run 'Setup.exe' from within the DVD. The two options pop-up 'Check compatibility' and 'Install now'. On clicking install now, after sometime, an error is encountered with the message 'Windows was unable to create a required installation folder' error code:0x8007000D. I am running Windows XP Professional and there's only one user on the PC which is the Admin, so i do not know why is the setup not getting permissions. I've also uninstalled my antivirus, CD burning software, disabled firewall and disconnected all other devices, but its still the same. I tried to install it from a USB device by making it bootable but that too doesnt work. (Yes the mobo supports booting from the USB). The problem is that XP does not recognize a 'USB' device on boot. Rather it shows this USB stick as a removable 'Hard Drive'. Furthermore, i changed the order of Hard Drive boot to boot from this removable Hard Drive first, it still boots my existing OS. Is there anything else that can be done? Any help would be greatly appreciated. :) Please ask if any other information is required, this post is becomimg increasingly long to add any other details. PS: I want to dual boot windows 7 with my existing XP, but that would be after i manage to run the windows 7 setup in the first place. PPS: Please bare with any 'not-so-technical' terms, i am a beginner with this. Again, thank you for taking the time and trying to help, really appreciate it. :)

  Read the article

• Very slow write access to SSD disks on some Asus P8Z77 motherboards

  - by lenik

  I have Asus P8Z77-V LK motherboard, that ran Mint 13 (based on Ubuntu 12.04) just perfectly, but recently I've tried to install Mint 17 and noticed abysmal write performance. Write speed on SSD disk was about 1.5MB/sec, when it's supposed to be in 150-250MB/sec range. For write testing I've used dd if=/dev/zero of=/dev/sda bs=10M count=10 while booted up from LiveCD. I have also tested the read speed with hdparm -tT /dev/sda and got about 440MB/sec -- that's normal. I can tell, the read performance has not degraded at all and is not an issue here. Since I had a few different SSD disks and few motherboards, I've tested and tested and here are results: Asus P8H77 works fine with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V LK works with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V PRO works with Mint13, and works just fine with Mint14, 15, 16 and 17. The only difference between "PRO" version and others is that it has extra SATA controller onboard (in addition to the Z77 chipset SATA controller) providing extra 2 SATA ports. SSD disks work fine with "PRO" version when connected to the native SATA ports as well as to the ports provided by extra SATA controller, so this does not look like a hardware issue. As far as I can tell, there's something changed in the kernel while going from 3.2 to 3.5, that affects the detection of onboard SATA controller for Asus P8*77 motherboards, that screws up the write speed for SSD drives. Could anyone shed some light on how to fix this issue or, possibly, give a pointer to a more suitable place to ask this question?

  Read the article

• Debian squeeze keyboard and touchpad not working / detected on laptop

  - by Esa

  They work before gdm3 starts. a connected mouse also stops working, but functions after removal and re-plug. no xorg.conf. log doesn't show any loading of drivers for kbd/touchpad [ 33.783] X.Org X Server 1.10.4 Release Date: 2011-08-19 [ 33.783] X Protocol Version 11, Revision 0 [ 33.783] Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian [ 33.783] Current Operating System: Linux sus 3.2.0-0.bpo.2-amd64 #1 SMP Sun Mar 25 10:33:35 UTC 2012 x86_64 [ 33.783] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-0.bpo.2-amd64 root=UUID=8686f840-d165-4d1e-b995-2ebbd94aa3d2 ro quiet [ 33.783] Build Date: 28 August 2011 09:39:43PM [ 33.783] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <[email protected]>) [ 33.783] Current version of pixman: 0.16.4 [ 33.783] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 33.783] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 33.783] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 28 09:34:04 2012 [ 33.837] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 33.936] (==) No Layout section. Using the first Screen section. [ 33.936] (==) No screen section available. Using defaults. [ 33.936] (**) |-->Screen "Default Screen Section" (0) [ 33.936] (**) | |-->Monitor "<default monitor>" [ 33.936] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 33.936] (==) Automatically adding devices [ 33.936] (==) Automatically enabling devices [ 34.164] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 34.164] Entry deleted from font path. [ 34.226] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 34.226] (==) ModulePath set to "/usr/lib/xorg/modules" [ 34.226] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 34.226] (II) Loader magic: 0x7d3ae0 [ 34.226] (II) Module ABI versions: [ 34.226] X.Org ANSI C Emulation: 0.4 [ 34.226] X.Org Video Driver: 10.0 [ 34.226] X.Org XInput driver : 12.2 [ 34.226] X.Org Server Extension : 5.0 [ 34.227] (--) PCI:*(0:1:5:0) 1002:9712:103c:1661 rev 0, Mem @ 0xd0000000/268435456, 0xf1400000/65536, 0xf1300000/1048576, I/O @ 0x00008000/256 [ 34.227] (--) PCI: (0:2:0:0) 1002:6760:103c:1661 rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072 [ 34.227] (II) Open ACPI successful (/var/run/acpid.socket) [ 34.227] (II) LoadModule: "extmod" [ 34.249] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 34.277] (II) Module extmod: vendor="X.Org Foundation" [ 34.277] compiled for 1.10.4, module version = 1.0.0 [ 34.277] Module class: X.Org Server Extension [ 34.277] ABI class: X.Org Server Extension, version 5.0 [ 34.277] (II) Loading extension SELinux [ 34.277] (II) Loading extension MIT-SCREEN-SAVER [ 34.277] (II) Loading extension XFree86-VidModeExtension [ 34.277] (II) Loading extension XFree86-DGA [ 34.277] (II) Loading extension DPMS [ 34.277] (II) Loading extension XVideo [ 34.277] (II) Loading extension XVideo-MotionCompensation [ 34.277] (II) Loading extension X-Resource [ 34.277] (II) LoadModule: "dbe" [ 34.277] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 34.299] (II) Module dbe: vendor="X.Org Foundation" [ 34.299] compiled for 1.10.4, module version = 1.0.0 [ 34.299] Module class: X.Org Server Extension [ 34.299] ABI class: X.Org Server Extension, version 5.0 [ 34.299] (II) Loading extension DOUBLE-BUFFER [ 34.299] (II) LoadModule: "glx" [ 34.299] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 34.477] (II) Module glx: vendor="X.Org Foundation" [ 34.477] compiled for 1.10.4, module version = 1.0.0 [ 34.477] ABI class: X.Org Server Extension, version 5.0 [ 34.477] (==) AIGLX enabled [ 34.477] (II) Loading extension GLX [ 34.477] (II) LoadModule: "record" [ 34.478] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 34.481] (II) Module record: vendor="X.Org Foundation" [ 34.481] compiled for 1.10.4, module version = 1.13.0 [ 34.481] Module class: X.Org Server Extension [ 34.481] ABI class: X.Org Server Extension, version 5.0 [ 34.481] (II) Loading extension RECORD [ 34.481] (II) LoadModule: "dri" [ 34.481] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 34.512] (II) Module dri: vendor="X.Org Foundation" [ 34.512] compiled for 1.10.4, module version = 1.0.0 [ 34.512] ABI class: X.Org Server Extension, version 5.0 [ 34.512] (II) Loading extension XFree86-DRI [ 34.512] (II) LoadModule: "dri2" [ 34.512] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 34.515] (II) Module dri2: vendor="X.Org Foundation" [ 34.515] compiled for 1.10.4, module version = 1.2.0 [ 34.515] ABI class: X.Org Server Extension, version 5.0 [ 34.515] (II) Loading extension DRI2 [ 34.515] (==) Matched ati as autoconfigured driver 0 [ 34.515] (==) Matched vesa as autoconfigured driver 1 [ 34.515] (==) Matched fbdev as autoconfigured driver 2 [ 34.515] (==) Assigned the driver to the xf86ConfigLayout [ 34.515] (II) LoadModule: "ati" [ 34.706] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 34.724] (II) Module ati: vendor="X.Org Foundation" [ 34.724] compiled for 1.10.3, module version = 6.14.2 [ 34.724] Module class: X.Org Video Driver [ 34.724] ABI class: X.Org Video Driver, version 10.0 [ 34.724] (II) LoadModule: "radeon" [ 34.725] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 34.923] (II) Module radeon: vendor="X.Org Foundation" [ 34.923] compiled for 1.10.3, module version = 6.14.2 [ 34.923] Module class: X.Org Video Driver [ 34.923] ABI class: X.Org Video Driver, version 10.0 [ 34.945] (II) LoadModule: "vesa" [ 34.945] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 34.988] (II) Module vesa: vendor="X.Org Foundation" [ 34.988] compiled for 1.10.3, module version = 2.3.0 [ 34.988] Module class: X.Org Video Driver [ 34.988] ABI class: X.Org Video Driver, version 10.0 [ 34.988] (II) LoadModule: "fbdev" [ 34.988] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 35.020] (II) Module fbdev: vendor="X.Org Foundation" [ 35.020] compiled for 1.10.3, module version = 0.4.2 [ 35.020] ABI class: X.Org Video Driver, version 10.0 [ 35.020] (II) RADEON: Driver for ATI Radeon chipsets: <snip> [ 35.023] (II) VESA: driver for VESA chipsets: vesa [ 35.023] (II) FBDEV: driver for framebuffer: fbdev [ 35.023] (++) using VT number 7 [ 35.033] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 35.033] (II) [KMS] Kernel modesetting enabled. [ 35.033] (WW) Falling back to old probe method for vesa [ 35.034] (WW) Falling back to old probe method for fbdev [ 35.034] (II) Loading sub module "fbdevhw" [ 35.034] (II) LoadModule: "fbdevhw" [ 35.034] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 35.185] (II) Module fbdevhw: vendor="X.Org Foundation" [ 35.185] compiled for 1.10.4, module version = 0.0.2 [ 35.185] ABI class: X.Org Video Driver, version 10.0 [ 35.288] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 35.288] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 35.288] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 35.288] (==) RADEON(0): Default visual is TrueColor [ 35.288] (==) RADEON(0): RGB weight 888 [ 35.288] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 35.288] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 4200" (ChipID = 0x9712) [ 35.288] (II) RADEON(0): PCI card detected [ 35.288] drmOpenDevice: node name is /dev/dri/card0 [ 35.288] drmOpenDevice: open result is 9, (OK) [ 35.288] drmOpenByBusid: Searching for BusID pci:0000:01:05.0 [ 35.288] drmOpenDevice: node name is /dev/dri/card0 [ 35.288] drmOpenDevice: open result is 9, (OK) [ 35.288] drmOpenByBusid: drmOpenMinor returns 9 [ 35.288] drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0 [ 35.288] (II) Loading sub module "exa" [ 35.288] (II) LoadModule: "exa" [ 35.288] (II) Loading /usr/lib/xorg/modules/libexa.so [ 35.335] (II) Module exa: vendor="X.Org Foundation" [ 35.335] compiled for 1.10.4, module version = 2.5.0 [ 35.335] ABI class: X.Org Video Driver, version 10.0 [ 35.335] (II) RADEON(0): KMS Color Tiling: disabled [ 35.335] (II) RADEON(0): KMS Pageflipping: enabled [ 35.335] (II) RADEON(0): SwapBuffers wait for vsync: enabled [ 35.360] (II) RADEON(0): Output VGA-0 has no monitor section [ 35.360] (II) RADEON(0): Output LVDS has no monitor section [ 35.364] (II) RADEON(0): Output HDMI-0 has no monitor section [ 35.388] (II) RADEON(0): EDID for output VGA-0 [ 35.388] (II) RADEON(0): EDID for output LVDS [ 35.388] (II) RADEON(0): Manufacturer: LGD Model: 2ac Serial#: 0 [ 35.388] (II) RADEON(0): Year: 2010 Week: 0 [ 35.388] (II) RADEON(0): EDID Version: 1.3 [ 35.388] (II) RADEON(0): Digital Display Input [ 35.388] (II) RADEON(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 35.388] (II) RADEON(0): Gamma: 2.20 [ 35.388] (II) RADEON(0): No DPMS capabilities specified [ 35.388] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 35.388] (II) RADEON(0): First detailed timing is preferred mode [ 35.388] (II) RADEON(0): redX: 0.616 redY: 0.371 greenX: 0.355 greenY: 0.606 [ 35.388] (II) RADEON(0): blueX: 0.152 blueY: 0.100 whiteX: 0.313 whiteY: 0.329 [ 35.388] (II) RADEON(0): Manufacturer's mask: 0 [ 35.388] (II) RADEON(0): Supported detailed timing: [ 35.388] (II) RADEON(0): clock: 69.3 MHz Image Size: 344 x 194 mm [ 35.388] (II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1430 h_blank_end 1486 h_border: 0 [ 35.388] (II) RADEON(0): v_active: 768 v_sync: 770 v_sync_end 774 v_blanking: 782 v_border: 0 [ 35.388] (II) RADEON(0): LG Display [ 35.388] (II) RADEON(0): LP156WH2-TLQB [ 35.388] (II) RADEON(0): EDID (in hex): [ 35.388] (II) RADEON(0): 00ffffffffffff0030e4ac0200000000 [ 35.388] (II) RADEON(0): 00140103802213780ac1259d5f5b9b27 [ 35.388] (II) RADEON(0): 19505400000001010101010101010101 [ 35.388] (II) RADEON(0): 010101010101121b567850000e302020 [ 35.388] (II) RADEON(0): 240058c2100000190000000000000000 [ 35.388] (II) RADEON(0): 00000000000000000000000000fe004c [ 35.388] (II) RADEON(0): 4720446973706c61790a2020000000fe [ 35.388] (II) RADEON(0): 004c503135365748322d544c514200c1 [ 35.388] (II) RADEON(0): Printing probed modes for output LVDS [ 35.388] (II) RADEON(0): Modeline "1366x768"x59.6 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 35.388] (II) RADEON(0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz) [ 35.388] (II) RADEON(0): Modeline "1152x768"x59.8 71.75 1152 1216 1328 1504 768 771 781 798 -hsync +vsync (47.7 kHz) [ 35.388] (II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz) [ 35.388] (II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz) [ 35.388] (II) RADEON(0): Modeline "848x480"x59.7 31.50 848 872 952 1056 480 483 493 500 -hsync +vsync (29.8 kHz) [ 35.388] (II) RADEON(0): Modeline "720x480"x59.7 26.75 720 744 808 896 480 483 493 500 -hsync +vsync (29.9 kHz) [ 35.388] (II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz) [ 35.392] (II) RADEON(0): EDID for output HDMI-0 [ 35.392] (II) RADEON(0): Output VGA-0 disconnected [ 35.392] (II) RADEON(0): Output LVDS connected [ 35.392] (II) RADEON(0): Output HDMI-0 disconnected [ 35.392] (II) RADEON(0): Using exact sizes for initial modes [ 35.392] (II) RADEON(0): Output LVDS using initial mode 1366x768 [ 35.392] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 35.392] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fba0000 [ 35.392] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM [ 35.392] (==) RADEON(0): DPI set to (96, 96) [ 35.392] (II) Loading sub module "fb" [ 35.392] (II) LoadModule: "fb" [ 35.392] (II) Loading /usr/lib/xorg/modules/libfb.so [ 35.492] (II) Module fb: vendor="X.Org Foundation" [ 35.492] compiled for 1.10.4, module version = 1.0.0 [ 35.492] ABI class: X.Org ANSI C Emulation, version 0.4 [ 35.492] (II) Loading sub module "ramdac" [ 35.492] (II) LoadModule: "ramdac" [ 35.492] (II) Module "ramdac" already built-in [ 35.492] (II) UnloadModule: "vesa" [ 35.492] (II) Unloading vesa [ 35.492] (II) UnloadModule: "fbdev" [ 35.492] (II) Unloading fbdev [ 35.492] (II) UnloadModule: "fbdevhw" [ 35.492] (II) Unloading fbdevhw [ 35.492] (--) Depth 24 pixmap format is 32 bpp [ 35.492] (II) RADEON(0): [DRI2] Setup complete [ 35.492] (II) RADEON(0): [DRI2] DRI driver: r600 [ 35.492] (II) RADEON(0): Front buffer size: 4224K [ 35.492] (II) RADEON(0): VRAM usage limit set to 228096K [ 35.615] (==) RADEON(0): Backing store disabled [ 35.615] (II) RADEON(0): Direct rendering enabled [ 35.658] (II) RADEON(0): Setting EXA maxPitchBytes [ 35.658] (II) EXA(0): Driver allocated offscreen pixmaps [ 35.658] (II) EXA(0): Driver registered support for the following operations: [ 35.658] (II) Solid [ 35.658] (II) Copy [ 35.658] (II) Composite (RENDER acceleration) [ 35.658] (II) UploadToScreen [ 35.658] (II) DownloadFromScreen [ 35.687] (II) RADEON(0): Acceleration enabled [ 35.687] (==) RADEON(0): DPMS enabled [ 35.687] (==) RADEON(0): Silken mouse enabled [ 35.721] (II) RADEON(0): Set up textured video [ 35.721] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 35.721] (--) RandR disabled [ 35.721] (II) Initializing built-in extension Generic Event Extension [ 35.721] (II) Initializing built-in extension SHAPE [ 35.721] (II) Initializing built-in extension MIT-SHM [ 35.721] (II) Initializing built-in extension XInputExtension [ 35.721] (II) Initializing built-in extension XTEST [ 35.721] (II) Initializing built-in extension BIG-REQUESTS [ 35.721] (II) Initializing built-in extension SYNC [ 35.721] (II) Initializing built-in extension XKEYBOARD [ 35.721] (II) Initializing built-in extension XC-MISC [ 35.721] (II) Initializing built-in extension SECURITY [ 35.721] (II) Initializing built-in extension XINERAMA [ 35.721] (II) Initializing built-in extension XFIXES [ 35.721] (II) Initializing built-in extension RENDER [ 35.721] (II) Initializing built-in extension RANDR [ 35.721] (II) Initializing built-in extension COMPOSITE [ 35.721] (II) Initializing built-in extension DAMAGE [ 35.721] (II) SELinux: Disabled on system [ 35.982] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 35.982] (II) AIGLX: enabled GLX_INTEL_swap_event [ 35.982] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 35.982] (II) AIGLX: enabled GLX_SGI_make_current_read [ 35.982] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 35.982] (II) AIGLX: Loaded and initialized /usr/lib/dri/r600_dri.so [ 35.982] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 35.999] (II) RADEON(0): Setting screen physical size to 361 x 203 [ 43.896] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.896] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.896] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 43.924] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.924] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.924] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 43.988] (II) RADEON(0): EDID vendor "LGD", prod id 684 [ 43.988] (II) RADEON(0): Printing DDC gathered Modelines: [ 43.988] (II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1430 1486 768 770 774 782 -hsync -vsync (46.6 kHz) [ 67.375] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1) [ 67.376] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 67.376] (II) LoadModule: "evdev" [ 67.376] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 67.392] (II) Module evdev: vendor="X.Org Foundation" [ 67.392] compiled for 1.10.3, module version = 2.6.0 [ 67.392] Module class: X.Org XInput Driver [ 67.392] ABI class: X.Org XInput driver, version 12.2 [ 67.392] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse' [ 67.392] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 67.392] (**) Logitech USB Optical Mouse: always reports core events [ 67.392] (**) Logitech USB Optical Mouse: Device: "/dev/input/event1" [ 67.392] (--) Logitech USB Optical Mouse: Found 12 mouse buttons [ 67.392] (--) Logitech USB Optical Mouse: Found scroll wheel(s) [ 67.392] (--) Logitech USB Optical Mouse: Found relative axes [ 67.392] (--) Logitech USB Optical Mouse: Found x and y relative axes [ 67.392] (II) Logitech USB Optical Mouse: Configuring as mouse [ 67.392] (II) Logitech USB Optical Mouse: Adding scrollwheel support [ 67.392] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 67.392] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 67.392] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input14/event1" [ 67.392] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE) [ 67.392] (II) Logitech USB Optical Mouse: initialized for relative axes. [ 67.392] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000 [ 67.392] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4 [ 67.392] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0) [ 67.392] (II) No input driver/identifier specified (ignoring) [ 78.692] (II) Logitech USB Optical Mouse: Close [ 78.692] (II) UnloadModule: "evdev" [ 78.692] (II) Unloading evdev

  Read the article

• Install Windows 7 x64 from a separate partition on same hard drive (no DVD/USB)?

  - by Fraser

  I'm currently running Windows XP 32-bit, and want to install Windows 7 64-bit. However, my DVD drive is broken, and the only USB sticks I have lying around are USB 1.1 only (SLOW!). So I tried (as suggested would work for a USB stick by several online guides): Created new primary partition (formatted NTFS) Set that partition as active Copied contents of Win7 x64 ISO Downloaded the 32-bit bootsect.exe Ran bootsect /nt60 F: However, when I boot into the new partition, I only see a blinking cursor on a blank screen; nothing happens. Any ideas?

  Read the article

• How can I chainload a USB drive from GRUB2?

  - by magic.plane

  I'm using GNU GRUB version 1.99-12ubuntu5, booted over the network using PXE. I used grub-mknetdir to generate the GRUB image and directory tree, which I'm serving on a TFTP server using Tftpd32 in Windows. I've put the latest version of Clonezilla on my USB drive using Tuxboot. Right now, in GRUB's CLI, using ls lists only the (pxe) device, even if the USB drive is plugged in before the computer is on. Is there any way I can chainload Clonezilla on my USB from GRUB, which is booted over the network?

  Read the article

• Want to install OS from USB instead of CD : How to deal with *.img image files?

  - by claws

  I'm on windows. I'm trying DragonflyBSD operating system. as you can see here: http://www.dragonflybsd.org/download/ there are two kinds of images CD (.iso) and USB (.img) files available for download. I downloaded *.iso and using UNetbootin to make a bootable USB stick. But its taking hell lot of time. Its been 2 hours and its just 50% done(9k of 18k files). I'm really pissed off now! I used *.iso because I didn't know how to deal with *.img files. Will it be quick *.img file? How to use it to make bootable USB?

  Read the article

• [Ubuntu] How can i log-in to Ubuntu using USB-serial console (rs232) ?

  - by marc

  Welcome, How can enable remote terminal login into Ubuntu 9.10 using usb-serial terminal ? I got created device ttyUSB0 and i want allow to log-in using hyper-terminal. I found some resources but they are related to real! hardware rs232 ports, i can't find any information about USB converter. Right now i have established connection between that usb-serial port and my laptop (i can send text writing to port cp sometext.txt /dev/ttyUSB0 and read using hyperterminal). Any idea ? Regards

  Read the article

• Does a USB to RJ-45 console cable exist?

  - by Carl Flippin

  I am aware of the RJ-45 to DB9 adapter commonly used on cisco routers to access console. I am aware of the USB to DB9 adapters to allow laptops without serial to get a serial port. I am looking for a USB to RJ-45 adapter so I don't have to chain two adapters together. I have searched everywhere but even the pre-packaged solutions seem to have the two adapters chained together. Does such a thing exist? If it doesn't is there some technical reason it cannot? It seems like a manufacturer would just have to wire the DB9 end of the USB adapter differently and it would work just fine plugged straight into the console port of the router.

  Read the article

• Static when metal USB plug touches my case, and other electrical problems.

  - by Archagon

  I have an aluminum PC case. Whenever the metal USB plug from my external drive contacts the front, I get crackling from my speakers, which are connected to an external USB soundcard. (This crackling happens even if they're not connected to the actual output jack.) A few possibly related problems: my audio occasionally starts popping once every few minutes, and my USB devices sometimes play the "connected" sound in Windows even though they're already connected, as if they're briefly disconnecting. My guess is that this has to do with the grounding, but I'm not sure exactly what to do. My case has a round grounding wire, but I don't know where to attach it, and fiddling with it didn't seem to have any effect. Suggestions?

  Read the article

• The speed of copying a file from a PC to a USB Flash drive started at 30MB/s and decreased to 5.8 MB

  - by Jian Lin

  If I copy a 8GB file from the PC to a USB Flash Drive, the speed will start at around 30 MB/s... maybe 28 MB/s, and then gradually, after a minute, it will go down to 15 MB/s and finally settle down at 5.8 MB/s. But I thought if it is a hard drive, then probably there is the RAM cache and also the internal hard drive cache, and will make the copying of file from PC to hard drive appear fast at first. But for a USB Flash drive, there should be no internal cache for the USB Flash drive itself. Is there a RAM cache for it, so that's why the initial copying seems so fast?

  Read the article

• What SATA drive should I install FreeBSD onto? i.e. ar0 vs da0 vs ad4/5

  - by Matt

  I'm installing FreeBSD 8.0 on a server that has hardware SATA Raid. I'm just wondering. What is the difference between these devices. i.e. ar0, da0, ad4, ad5 I take it that ad4 & 5 are my two disks. Somehow the OS can see them individually even though it's one logical mirrored drive. Should I be installing it onto ar0 or one of the adX disks. What is da0? it's smaller than the others. ar0 is not some kind of software raid device is it? Just want to make sure I don't mess this up right from the get go.

  Read the article

• Is a PCIE X1 card for USB 3.0 worth it?

  - by lelouch

  I have a portable HDD on USB 3.0, and soon I'll have a 32gb flash drive on USB 3.0 as well. My motherboard is pretty old - and the next time I'll upgrade it is when I get a new CPU/mobo/ram. Slots on my mobo: PCIE X16 - For my GTX 260 2xPCI PCIE X1 I'm considering purchasing a PCI express X1 card like this - http://www.ebay.com.au/itm/PC-Laptop-2-USB3-0-Ports-PCI-E-PCI-Express-X1-Card-New-/280772000446?pt=AU_Networking&hash=item415f50babe Now the question: What are realistic (read/write) speeds I'll get in this setup, assuming I have 1 USB 3 device connected at a time, and the bottleneck is the PCIE?

  Read the article

• Tool for creating system image from DOS (should be USB bootable) ..?

  - by Ahmad

  I want to know if there's any decent tool which can be used to create the system image from DOS .. What I specifically want to do is to put the program in my FAT32 formatted USB, then boot the target computer from the USB so that the tool runs, and then it should be able to create a complete system image of the entire system, and store it on the USB itself .. Please note that I can ONLY do this from boot time because of other limitations .. I cannot go into any OS to do it from there .. So I need tools which can do this at boot time from DOS ..

  Read the article

• Install Windows XP/7 without a CD drive when the BIOS does not support booting from USB devices

  - by David Pearce

  I have a computer that has a dead CD drive in it and it seriously needs a new installation of Windows (XP is on it now, but Windows 7 does not sound that bad). At first I tried making a bootable USB drive, but it does not look like the BIOS supports booting directly from a USB drive. Is there some sort of boot loader that I can put onto the hard drive first and boot from the USB drive using that? If not, how else can I re-install Windows on the computer? Edit: The only bootable device the computer has it the network with PXE (although I have no idea how to do that) and it's three internal hard drives

  Read the article

• Is it possible to put only the boot partition on a usb stick?

  - by Steve V.

  I've been looking at system encryption with ArchLinux and i think I have it pretty much figured out but I have a question about the /boot partition. Once the system is booted up is it possible to unmount the /boot partition and allow the system to continue to run? My thought was to install /boot to a USB stick since it can't be left encrypted and then boot from the USB stick which would boot up the encrypted hard disk. Then I can take the USB key out and just use the system as normal. The reason I want to do this is because if an attacker was able to get physical access to the machine they could modify the /boot partition with a keystroke logger and steal the key and if they already had a copy of the encrypted data they could just sit back and wait for the key. I guess I could come up with a system of verifying that the boot has been untouched at each startup. Has this been done before? Any guidance for implementing it on my own?

  Read the article

• Is it possible to live-boot VirtualBox from a USB flash drive?

  - by bw.

  To clarify, I'm not asking if you can boot from USB from within VirtualBox. I would like to make a portable version of Windows 7 that I can run from a USB drive on any machine. I'm putting a distro of Linux on my laptop, but I manage a Windows domain at work so I'd like an easier management solution than trying to use Linux tools to interface with a Windows DC(as RDP to a DC is not always an option). The reason I'm inquiring about VirtualBox... I plan on carrying this portable installation with me and using it on multiple machines, so I would like to avoid driver conflicts (which I imagine would happen if I only installed Windows on a flash drive). Basically, I need a way to boot an installation of Windows 7 from USB that still allows me to install/remove/update programs as if it were installed on a standard hard drive, and not freak out over different hardware configurations. Please help, superusers!

  Read the article

• Why does 'dd' not work for creating bootable USB?

  - by jdowner

  Recently I wanted to create a bootable USB of Linux mint. I found that there was a lot of conflicting advice/experience about whether the 'dd' command could be used to create a bootable USB. I decided to download an ISO and try. While dd definitely put the image on the USB stick it was not bootable. So my question is what is the magic ingredient that will make this work or why has this approach persisted if it does not work? This is the command I used, dd if=/mint/iso/image of=/dev/sdb1 oflag=direct

  Read the article

• How do I change my resolution to 1600*900 for a wide screen monitor?

  - by Madhu

  How do I change my resolution to 1600*900 for a wide screen monitor in Oneiric? My Hardware configuration is as below: madhu@madhu-Home:~$ lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller 00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10) madhu@madhu-Home:~$ cat /etc/X11/xorg.conf

  Read the article

• Loads wrong resolution when installing

  - by Kevin DB

  I'm trying to install Ubuntu 11.04 from a USB. My computer does load the USB file and I get some sort of BIOS-like screen where I can choose between 'Install from USB' and 'Boot-up from USB'. When I entered the corresponding number my screen resolution is totally messed up. I see that Ubuntu is starting up when I used Boot from USB, but the screen looks the same as you'd have a too high screen resolution. Same story with Install from USB. I can see the screens loading and the menu's and stuff, but not clearly because it load in a too high screen resolution. I'm trying to dual-boot is with Windows XP and max. screen resolution is 800x600.

  Read the article

• Only One GPU Detected in the Nvidia Quadra NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• Need help fixing DPKG errors after update from 12.04 to 12.10

  - by James Wulfe

  So I was doing fine then i upgraded my system to 12.10 and now i cant get my system to update all of its packages properly. no matter what i do, what is happening here and how do i fix this. if i would have thought 12.10 would be this much of a hassle i would have never upgraded..... here is a sampling of the code that returns from "apt-get -f install" It should also be noted that it is just these 6 packages only. no other packages have given me this kind of trouble. well i should say as of now. It was just 5, but them i got an update for unity, and now unity-common is added to the trouble makers. which prevents me from further upgrading the actual unity package as this package is a dependancy. Preparing to replace usb-modeswitch-data 20120120-0ubuntu1 (using .../usb-modeswitch-data_20120815-1_all.deb) ... /var/lib/dpkg/info/usb-modeswitch-data.prerm: 4: /var/lib/dpkg/info/usb-modeswitch-data.prerm: dpkg-maintscript-helper: Input/output error dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg: trying script from the new package instead ... /var/lib/dpkg/tmp.ci/prerm: 4: /var/lib/dpkg/tmp.ci/prerm: dpkg-maintscript-helper: Input/output error dpkg: error processing /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 2 /var/lib/dpkg/info/usb-modeswitch-data.postinst: 7: /var/lib/dpkg/info/usb-modeswitch-data.postinst: dpkg-maintscript-helper: Input/output error dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/network-manager_0.9.6.0-0ubuntu7_i386.deb /var/cache/apt/archives/pcmciautils_018-8_i386.deb /var/cache/apt/archives/unity-common_6.10.0-0ubuntu2_all.deb /var/cache/apt/archives/whoopsie_0.2.7_i386.deb /var/cache/apt/archives/usb-modeswitch_1.2.3+repack0-1ubuntu3_i386.deb /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I would also like to note i have cleaned apt cashe both through the terminal and manualy, i have tried installing them manually through dpkg from both the /var/cache/apt/archives/ location and from my own manually downloaded .deb files. i have tried using dpkg-reconfigure and i have used bleachbit to clean my system. I have also tested both my HDD and memory and found no significant errors to lead to the input/output errors. Quite frankly i am just out of options and have grown tired of trying to google a solution to this mess but still do not wish to pursue backing up settings and reinstalling the system. Any help would be appreciated. I am only interested in answers, please leave your feeling towards grammar, punctuation, and bias towards how a "post should look" at the door. If you dont have something to contribute towards solving my problem then you are just doing nothing but contributing to it. Thank you.

  Read the article

• Only One GPU Detected in the Nvidia Quadro NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• Unable to configure/setup 5.1 audio with 12.04

  - by Vipin Vinayan

  I am kinda new to Ubuntu as well. I have been having this issue with audio for quite sometime now. Initially, when I installed version 11.10 (I guess), I was able to use my 5.1 speakers without any issues. If my memory serves me right, it was after an update that the 5.1 audio stopped working and the video resolution would not get saved. I temporarily fixed the resolution issue by creating a start-up shell script that would update the resolution and load it. But the issue with audio has been going on for quite sometime now. Even though I have option for 5.1, only two speakers seem to be working. I thought an upgrade should fix the issue and so upgraded the OS to version 12.04. I also tried uninstalling alsa and pulse audio, reinstalling them, changing the /etc/pulse/daemon.conf channels from 2 to 6. I have also tried installing pavucontrol but nothing seems to have worked and the issue still persists. Is there anything else you could suggest? The lspci log on my computer is as follows 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) 00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) Would really appreciate a response that will assist me in resolving my issue. Thanks in advance Vipin

  Read the article

• Informaton of pendriver with libudv on linux

  - by Catanzaro

  I'm doing a little app in C that read the driver information of my pendrive: Plugged it and typed dmesg: [ 7676.243994] scsi 7:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS [ 7676.248359] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 7676.256733] sd 7:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 7676.266559] sd 7:0:0:0: [sdb] Write Protect is off [ 7676.266566] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 7676.266569] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7676.285373] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7676.285383] sdb: sdb1 [ 7676.298661] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7676.298667] sd 7:0:0:0: [sdb] Attached SCSI removable disk with "udevadm info -q all -n /dev/sdb" P: /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host7/target7:0:0/7:0:0:0/block/sdb N: sdb W: 36 S: block/8:16 S: disk/by-id/usb-Lexar_USB_Flash_Drive_AA5OCYQII8PSQXBB-0:0 S: disk/by-path/pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:0 E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host7/target7:0:0/7:0:0:0/block/sdb E: MAJOR=8 E: MINOR=16 E: DEVNAME=/dev/sdb E: DEVTYPE=disk E: SUBSYSTEM=block E: ID_VENDOR=Lexar E: ID_VENDOR_ENC=Lexar\x20\x20\x20 E: ID_VENDOR_ID=05dc E: ID_MODEL=USB_Flash_Drive E: ID_MODEL_ENC=USB\x20Flash\x20Drive\x20 E: ID_MODEL_ID=a813 E: ID_REVISION=1100 E: ID_SERIAL=Lexar_USB_Flash_Drive_AA5OCYQII8PSQXBB-0:0 E: ID_SERIAL_SHORT=AA5OCYQII8PSQXBB E: ID_TYPE=disk E: ID_INSTANCE=0:0 E: ID_BUS=usb E: ID_USB_INTERFACES=:080650: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usb-storage E: ID_PATH=pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:0 E: ID_PART_TABLE_TYPE=dos E: UDISKS_PRESENTATION_NOPOLICY=0 E: UDISKS_PARTITION_TABLE=1 E: UDISKS_PARTITION_TABLE_SCHEME=mbr E: UDISKS_PARTITION_TABLE_COUNT=1 E: DEVLINKS=/dev/block/8:16 /dev/disk/by-id/usb-Lexar_USB_Flash_Drive_AA5OCYQII8PSQXBB-0:0 /dev/disk/by-path/pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:0 and my software is: Codice: Seleziona tutto #include <stdio.h> #include <libudev.h> #include <stdlib.h> #include <locale.h> #include <unistd.h> int main(void) { struct udev_enumerate *enumerate; struct udev_list_entry *devices, *dev_list_entry; struct udev_device *dev; /* Create the udev object */ struct udev *udev = udev_new(); if (!udev) { printf("Can't create udev\n"); exit(0); } enumerate = udev_enumerate_new(udev); udev_enumerate_add_match_subsystem(enumerate, "scsi_generic"); udev_enumerate_scan_devices(enumerate); devices = udev_enumerate_get_list_entry(enumerate); udev_list_entry_foreach(dev_list_entry, devices) { const char *path; /* Get the filename of the /sys entry for the device and create a udev_device object (dev) representing it */ path = udev_list_entry_get_name(dev_list_entry); dev = udev_device_new_from_syspath(udev, path); /* usb_device_get_devnode() returns the path to the device node itself in /dev. */ printf("Device Node Path: %s\n", udev_device_get_devnode(dev)); /* The device pointed to by dev contains information about the hidraw device. In order to get information about the USB device, get the parent device with the subsystem/devtype pair of "usb"/"usb_device". This will be several levels up the tree, but the function will find it.*/ dev = udev_device_get_parent_with_subsystem_devtype( dev, "block", "disk"); if (!dev) { printf("Errore\n"); exit(1); } /* From here, we can call get_sysattr_value() for each file in the device's /sys entry. The strings passed into these functions (idProduct, idVendor, serial, etc.) correspond directly to the files in the directory which represents the USB device. Note that USB strings are Unicode, UCS2 encoded, but the strings returned from udev_device_get_sysattr_value() are UTF-8 encoded. */ printf(" VID/PID: %s %s\n", udev_device_get_sysattr_value(dev,"idVendor"), udev_device_get_sysattr_value(dev, "idProduct")); printf(" %s\n %s\n", udev_device_get_sysattr_value(dev,"manufacturer"), udev_device_get_sysattr_value(dev,"product")); printf(" serial: %s\n", udev_device_get_sysattr_value(dev, "serial")); udev_device_unref(dev); } /* Free the enumerator object */ udev_enumerate_unref(enumerate); udev_unref(udev); return 0; } the problem is that i obtain in output: Device Node Path: /dev/sg0 Errore and dont view information. subsystem and the devtype i think that are inserted well : "block" and "disk". thanks for help. Bye

  Read the article

• My Encore N300 wireless usb doesn't connect, any workarounds?

  - by rafa

  I decided to wipe Windows 7 and made a full installation. Everything works great but for a Encore N300 wireless usb dongle that I use on my desktop. Ubuntu seems to recognize it and I can browse the available networks, but I can connect to any of them. I was told that I should download its drivers, and so I did it, but I don't know how to install them. Please, I'd like to know if my connectivity problem is really a driver issue or some other thing.

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >