Search Results

Search found 3831 results on 154 pages for 'w2k8 r2'.

Page 109/154 | < Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >

• Windows 2003 shutdown instead of reboot

  - by The_cobra666

  Hi all, I've got a very strange problem. On the net I can only find problems with Server 2003 pc's, that reboot instead of shutting down, but in my case... (go figure) it does the opposite. When I choose to reboot, the system shutdown. Yes I am sure I used the reboot button. It happens via start == reboot and it happens when clicking on the reboot button when the update's have been installed. Nothing changed to the system's hardware. Only update's have been installed on the system. I did notice something odd in the logs when rebooting: Description: Timed out sending notification of target device change to window of "C:\WINDOWS\Explorer.EXE" KB: http://support.microsoft.com/kb/924390 They talk about a removable drive, but in my case, it's explorer.exe :s it appears 4 times. OS: Windows Server 2003 R2. Services: AD, DNS, DHCP, WSUS. Thanks in advance! Greetings from Belgium Shane

  Read the article

• How to correct time on Windows PDC server without affecting logons

  - by Kieran Walsh

  I know how to set an authoritative time server in Server 2008 R2. That's not what this question is. I want to know how I can change the time on a network where the PDC (and therefore everything) is a month out of date? I know that a 5 minute difference in time between clients and the domain prevents logons, so just changing the time on the PDC will break everything. What is the best way to fix this? Thanks Kieran.

  Read the article

• KMS / Office 2010... please point to documentation.

  - by TomTom

  Trying to find out how to "modify" KMS to also accept the Office 2010 KMS key. Can anyone point me to some document about this? Basically - do I have to install an update to KMS? I wand my KMS server to authenticate both, Windows (It currently has a DataCenter R2 KMS key installed) as well as Office 2010. Keys are available ;) I can not imagine I just ptu it in - would this not overwrite the DataCenter key? I tried the MSDN website, but there is no clear document visible for my question.

  Read the article

• Error setting up Data Protection Manager 2010 Agents / Network "Unauthenticated" in network settings

  - by Bowsa

  I'm not sure if the two are connected but i suspect they are. Basically I'm tring to setup Data Protection Manager 2010 on a fresh install of Server 2008 R2 in a SBS 2003 domain. Everything went fine until trying to install agents across the network. Upon clicking add, i get the following error message: Unable to connect to the Active Directory Domain Services Database. Make sure that the DPM server is a member of a domain and that the controller is running. Also verify that there is network connectivity between the DPM server and the domain controller. ID: 7 As usual (worryingly) the MSDN support for 2010 products is nearly non existant, clicking the error ID simply gives a page not found error. So after 2 days of Googling and trying various fixes (DNS settings, adding permissions to GPO objects, rejoining the domain and many more) I thought I'd ask here in the hope that someone out there may have had this issue before. Any help greatly appreciated!

  Read the article

• Terminal Services - MS Access Frequently "Not Responding"

  - by jonfhancock

  Exposition: We use a program built in MS Access that I serve via Terminal Services. I just installed a new TS Server with a Quad Core 2.6GHz Xeon, 8GB RAM, and 4 SATA drives in a RAID 0. In installed Server 2008 R2 (64bit obviously). It's only role is TS. The problem: With just a few sessions (under 10), I start getting frequent Not Responding messages in each session. When it happens, the users aren't doing anything particularly taxing, just form navigation and simple insert queries. I can live with some stalls, but it is visually jarring in WS08 because the screen goes gray, and it presents a dialog offering to wait or close with some other options. Questions: Any suggestions for improving performance and reducing hangs? Is it possible to disable the dialog (always wait) and screen graying?

  Read the article

• Using VMWare Workstation, to convert a physical Win2008 into a templtae

  - by SndLt

  I'm new to VMware and despite having read the documentations, I'm having trouble. I'm using VMware workstation Stand-Alone package to turn a physical Win Server 2008 R2 into a usable VM appliance. The source and destination part is getting me here. It seems using keyword "localhost" doesn't cut all the way through. Does the shared folder have to be in my local drive for that matter? For ip, am I using the simple private IP that my nearest DHCP has given me? But what if I have more than one interfaces that have two or three different private ip addresses? Thanks.

  Read the article

• Asp.net 4.0 Handler Mappings Missing in IIS7

  - by Marc

  I have two Windows 2008 R2 Servers running an asp.net 4.0 app. The server that is having problems actually loads asp.net pages just fine, but if there are any ajax calls they don't work. I noticed there are no .net 4.0 specific Handler Mappings in IIS for this server like the other server has. It's literally missing all .net 4.0 mappings (.axd, .soap, .cshtm, .ashx and even .aspx). I've tried running "aspnet_regiis -ir" but that didn't help. Should I reinstall the .net 4.0 framework? Manually add all these missing mappings? Is there something else going on? What I don't want to do is add a ton of handlers to a web.config, they aren't needed on the server that works so it shouldn't be needed on the broken one.

  Read the article

• performance monitor in iis 7 to monitor which website is using most resources (asp.net)

  - by Karl Cassar

  I am using Windows Server 2008 R2 and IIS 7.5, and am hosting multiple websites on the same webserver. Is it possible to use Performance Monitor to know on average which website is using the most resources? I've added a user-defined Data Collector Set in Performance Monitor collecting data for 1 day. However, I could not find any details which hint which website is using the most resources. Which counters are crucial to monitor websites? The generated report tells me that the top process is w3wp##1 - how can I know which website it corresponds to? I've also tried to add counters for ASP.Net Applications for all object instances, however % Managed Processor Time (estimated) is 0 at all times.

  Read the article

• Users can't change password trough OWA for Exchange 2010

  - by Rémy Roux

  Here's our problem, users who want to change their password trough OWA get this error "The password you entered doesn't meet the minimum security requirements.", even if users are respecting the minimum security requirements. With these settings, we have the error: Enforced password history 1 passwords remembered Maximum password age 185 days Minimum password age 1 day Minimum password length 7 characters Password must meet complexity requirements enabled With these test settings, we don't have an error: Enforced password history not defined Maximum password age not defined Minimum password age not defined Minimum password length not defined Password must meet complexity requirements not defined People can change their password but there is no more security! Just changing one parameter of the GPO for example "Enforced password history", brings back this error. Here's our server configuration : Windows Server 2008 R2 Exchange Server 2010 Version: 14.00.0722.000 If anybody has a clue it would very helpful !

  Read the article

• Two different sites, same IP, same top-level domain, on IIS 7.5 -- one works and the other displays HTTP 404 error

  - by user717236

  I'm running a Windows 2008 R2 box with IIS 7.5 as the web server. On IIS, I have two websites: mysubsite1.mysite.com and mysubsite2.mysite.com. There is only one IP on the server and both sites share this IP. Here is how I have the bindings configured: mysubsite1.mysite.com works fine. However, mysubsite2.mysite.com gives me the following error: Not Found HTTP Error 404. The requested resource is not found. Now, if I change the Host name field for mysubsite1.mysite.com to blank and restart the web server, both sites work! The question is why is the host name field for the first site causing an HTTP 404 error for the second site when both sites' Host name fields are filled? I would appreciate any insight. Thank you.

  Read the article

• How do I do a swing migration of Exchange 2007?

  - by Graeme Donaldson

  As per my previous question, I have an Exchange 2007 box which is also a DC. Since I can demote it while Exchange is installed, I need to a swing migration. Does anyone have any articles, tips or experiences to share on this? The last time I did a swing it was with Exchange 2003 and even that is a little rusty in my head. The setup is a single Exchange 2007 Hub/Edge/Mailbox/CAS server. Its currently on Windows Server 2008, I can migrate it to the same OS, or I can go to 2008 R2, I'm not really picky on that. We're running OWA/ActiveSync/POP3(S)/IMAP(S) for client access. I already have another fully functional DC/GC/DNS box in the same site and clients in the site are already using that for DNS. It's also the preferred site bridgehead for AD replication. Any tips?

  Read the article

• Windows server's HDD Spin down daily/nightly - Does it makes sense?

  - by Riccardo

  A Windows Server 2003 R2 has the following hard disk configuration: - 3 internal hard disks attached to a 3Ware unit, configured in Raid 1 + spare unit - 3 external USB backup disks: 2 Verbatim 1TB (Samsung HD103SI) + 1 Western Digital 1TB (WD10EADS) The server runs 365 days per year, h24, however: - at daytime the server/user usage is limited to the internal hard disks - at nighttime there's no user usage, apart from scheduled maintenance tasks, basically the Server will be idle from 7PM to 8AM. apart from nighly backups (few hours). I was wondering if: (a) it makes any sense let Windows manage power savings, allowing disks to spin down accordingly, ** OR** let the disks stay awlays-on, to avoid permature wearing, due to continuous spin up/down (b) leave internal disks always on, and force external disks to power down while idle (this requires third party tools, such as Verbatim's Green button utility) Your thoughts?

  Read the article

• Virtual NIC on VM couldn't ping externally after Vmotion

  - by ToreTrygg

  Today I vmotioned 5 MS SQL 2005 servers over to a new DRS Cluster. All SQL servers use the "Production_LAN" network and a single virtual NIC of type "VMXNET 3". The first 4 SQL VM (Windows 2003 Standard or Enterprise x32 bit) vmotioned over without a hitch. The last SQL VM I vmotioned (Windows 2003 Standard x64 bit R2) vmotioned over without error, but I upon completion, I could no longer ping the VM. I went into the VM and could not even ping the gateway, however I could ping the loopback. This SQL server is extremely busy in comparison with the previous 4 VM's. I restarted the server and it came back up with the virtual nic working just fine. The build of both servers (vmotioner and vmotionee) is ESX 4.0.0 175625 - So, pre-update 1. Should I suspect the network switch/VM for possibly not updating the mac table on the switch? Anybody else ever have this issue or know what may have caused it? Thank you!

  Read the article

• Asus AT3-IONT & Win XP [closed]

  - by user59178

  Hello! I'm trying to install Windows XP on my nettop (Asus AT3-IONT motherboard). There is a problem - when the progress comes to partition selection, it sees all the partitions on the hard drive, but when I'm selecting any partition, it says that it's not compatible with Windows XP. Windows 7 was installed without any problems, but XP and 2003 R2 have this problem. How can I solve it? P.S. I already have Windows 7, I need exactly XP or 2003 for my work. Thanks.

  Read the article

• How can I permanently remove default root hints from a Server 2008 DNS server?

  - by TonyD

  My network exists in private address space and I am unable to perform DNS lookups against DNS servers on the internet directly (blocked by firewall). There are other networks that exist in the same private address space as my network. I need to be able to perform DNS lookups for devices in these networks as well. There are 2 main internal DNS servers in this private address space, but not on my netowrk. I can perform DNS lookups against both of these servers for devices internal to our address space and names on the internet. I would like to permanently remove the root hints from our Server 2008 R2 DNS server and replace them with these 2 internal DNS servers. I have removed them from the dnsmgmt console, the C:\Windows\System32\DNS\cache.dns file, and from the RootDNSServers folder under the System folder in ADUC. Even so, they continue to repopulate into the root hints tab in the server properties for DNS after roughly an hour. Does anyone know how to permanently remove these entries?

  Read the article

• WMIC returns error when querying product

  - by Stu

  I'm trying to automate the installation of an MSI on my server, however before the installation can go ahead I need to uninstall the previous version from the server. Searching on the internet I've found that WMIC is the tool required but there seems to be a problem with the setup of WMI on the server. Running the following command gives errors: command promptwmic then inside the tool /trace:on product get name This returns a long string of successes and one failure: FAIL: IEnumWbemClassObject->Next(WBEM_INFINITE, 1, -, -) Line: 396 File: d:\nt\admin\wmi\wbem\tools\wmic\execengine.cpp Node - ENTECHORELDEV ERROR: Code = 0x80041010 Description = The specified class is not valid. Facility = WMI I'm trying to run this on a standard install of Windows Server 2003 R2 with administrator privelages. Thanks Stu

  Read the article

• Prevent Server Restart after Windows Updates

  - by eidylon

  we have a number of servers in our office, as a small hosting company, and these servers are critical to business, ... web server, mail server, db server, etc. On a semi-regular basis, when the machines get automatic updates, they just automagically reboot themselves in the middle of the night. A number of them have software which must be running on the console session (bad practice, I know, but out of my control). When they reboot themselves, these programs obviously shut down, leaving customers upset and services interrupted. How do you set a Windows Server 2003 R2 machine to NEVER automagically reboot itself after updates? And perhaps, if possible, to instead email someone so that they are aware it needs a pending reboot and can schedule it for the best time? Thanks in advance!

  Read the article

• Do I need Exchange Server for SMTP only

  - by Rajeev

  Hi, I have a Web based application, through which i intend to send an email notifications to the users who singns in. I have put a SMTP server on Windows 2008 R2 Standard edition for the same. Do i need anything else apart from the SMTP server, like Lotus or Exchange server. Again for clarification I only need to send Emails to the users and I am not suppose to recieve emails through it. Looking for help soon. Thanks in advance.

  Read the article

• How to Configure IIS 7.5 to Host Several Classic ASP Sites using 1 IP Address?

  - by SidC

  We are running Windows Server 2008 R2 with IIS 7.5 and have 4-5 Classic ASP sites to install. The main site is stored in wwwroot and the other sites are stored in folders below wwwroot. We have 1 IP address for the server. How do I configure IIS to allow folks to browse/test the sites before domain names are pointed to te server? When I setup one of the sites in a subfolder of wwwroot and assign a separate port to it, I receive a message stating: Config Error Cannot add duplicate collection entry of type 'add' with unique key attribute 'value' set to 'index.asp' How do I remedy this error and permit IIS to render the site?

  Read the article

• Recommended CPU upgrade for Dell Vostro 220 with Intel E7300 processor?

  - by Justin Grant

  I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

  Read the article

• Intgrating windows 2000 server in a windows 2008 domain [on hold]

  - by user199121

  I have a network enviroment where my windows 2000 server is just acting as fileserver for sharing, so all the users has an account there with username, password and a list of access rights. Now i want to keep this server cause i am running from there an application that 20 users access but also i want to add a new Windows 2008 R2 64 bit server as a domain controller. Is this possible ? 1-It is ok to make the new windows 2008 server a domain controller ? 2- I want all the users accounts to be the same in the domain controller so they can still use the same username and password to login into the domain as well into the windows 2000 server that is setup as a Workgroup. 3- Do i need to do something to the windows 2000 sever to still be functional in the environment so it can be accessed by the clients computers? note:My clients computers are windows 2000 pro, xp pro and windows 7 32/64 bit. Thanks in advance

  Read the article

• How does one guarantee a remote client the same local IP address every time when connecting to a VPN?

  - by Joe Carroll

  I need to configure a VPN for secure remote access to a PACS serving DICOM radiological images. The DICOM standard requires that any clients accessing the PACS must be using a fixed IP address that is pre-registered in PACS. I haven't implemented this solution before and would appreciate any guidance. I believe it should be possible to use RADIUS on the server to authenticate users connecting to the VPN and with it assign each user their own specific local subnet IP address, which would be registered with the PACS. The server runs Windows Server 2003 R2 Enterprise Edition SP2 and the VPN device is a FortiGate 60C. The What would be the best and/or simplest way to set this up?

  Read the article

• Could my 64-bit server be somehow identifying itself as a 32-bit server?

  - by Deane

  Has anyone ever heard of a 64-bit OS identifying itself as a 32-bit OS? We have a Windows Server 2008 R2 x64 development server. We've been trying to activate it with a product key from MSDN, but it keeps telling us the the key is invalid. I've opened a ticket with MSDN for this. Then something odd happened -- I tried to install a 64-bit version of SQL Server 2005. After it extracted, we got this message: This version of hotfix.exe is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program... Now, we're pretty sure this is a 64-bit OS. Computer Properties says: System Type: 64-bit Operating System Also, we have both a "Program Files" and a "Program Files (x64)" directory. I don't know how the product key activator or the SQL install program attempts to divine the type of OS, but could it be...wrong?

  Read the article

• Mounting windows shares with Active Directory permissions

  - by Jamie

  I've managed to get my Ubuntu (server 10.04 beta 2) box to accept logins from users with Active Directory credentials, now I'd like those users to access there permissible windows shares on a W2003 R2 server. The Windows share ("\srv\Users\") has subdirectories named according to the domain account users and permissions are set accordingly. I would like to preserve these permissions, but don't know how to go about it. Would I mount as an AD administrator or have each user mount with there own AD credentials? How do determine between using mount.smbfs or mount.cifs?

  Read the article

• DNSHost.exe trojan found, now after fix, no one can print

  - by Matt Dawdy

  What started today as an inability to get to the internet (but people could get in just fine), morphed to we realized that the DNS Server wasn't working, then we figured out that we had a trojan called DNSHost.exe (spybot.rl I think), and we disabled its service entry and deleted the offending file and all registry keys told to use by the Trend Micro site. Now, we can get on the internet, but the printer being served by this machine (called server2) cannot be printed to from any client machine on the network. We get the error "The RPC Server is unavailable". I'm assuming that this is related to the DNS issue we had earlier, as we were able to print just fine until this fun happiness started this morning. Anyone have any solid suggestions? Windows Server 2003 R2 SP2, and the client machine are all Windows XP SP2.

  Read the article

< Previous Page | 105 106 107 108 109 110 111 112 113 114 115 116  | Next Page >