Search Results

Search found 889 results on 36 pages for 'acts as commentable'.

Page 11/36 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Multiple interfaces to one IP address?

  - by Delan Azabani

  At present, I have: a Netgear router with DHCP off at 192.168.0.1 my computer eth0 at 192.168.0.2 wlan0 at 192.168.0.2 The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation. If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected. Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).

  Read the article

• How soon does nginx's token bucket replenish when limiting at requests per minute?

  - by Michael Gorsuch

  Hi all. We've decided that we want to experiment and limit requests per minute instead of requests per second on our sites. However, I am confused by the burst parameter in this context. I am under the impression that when you use the 'nodelay' flag, the rate limiting facility acts like a token bucket instead of a leaky bucket. That being the case, the bucket size is equal to the burst parameter, and every time that you violate the policy (say 1 req/s), you have to put a token in the bucket. Once the bucket is full (being equal to the burst setting), you are given a 503 error page. I am also under the impression that once a violator stops going against the policy, a token is removed from the bucket at a rate of 1 token/s allowing him to regain access to the site. Assuming that I have the above correct, my question is what happens when I start regulating access per minute? If we chose 60 requests per minute, at what rate does the token bucket replenish?

  Read the article

• Exchange mail users cannot send to certain lists

  - by blsub6

  First of all, everyone's on Exchange 2010 using OWA I have a dynamic distribution list that contains all users in my domain called 'staff'. I can send to this list, other people can send to this list, but I have one user that cannot send to this list. Sending to this list gives the user an email back with the error: Delivery has failed to these recipients or groups: Staff The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk. and then a bunch of diagnostic information that I don't want to paste here because I don't want to have to censor all of the sensitive information contained (lazy) Can you guys throw me some possible reasons why this would happen? If there are an innumerable number of reasons, where should I start to troubleshoot this? EDIT One Exchange server inside the network that acts as a transport server, client access server and mailbox server and one Edge Transport server in the DMZ.

  Read the article

• EEE PC 701/4G Surf Internal Drive: Is it really SSD?

  - by Bart Silverstrim

  I have an old EEE PC with the 4 Gig internal drive. Everything I've read keeps saying it's an SSD drive; running lshw tells me that it's an ATA disk, Silicon Motion SM. The thing seems to be rather slow, though. I know it has a 900 Mhz Celeron processor and only 512 meg of RAM, but it seems like drive access is slow even for those specs. Does anyone know if it really has an SSD drive? I thought that compared to regular hard disks SSD's were blazing fast, and this feels like and acts like it's pulling from something more akin to an internal USB memory stick.

  Read the article

• tcpsndbuf high fail count

  - by Matthew Crenshaw

  I've got a small setup, one machine that acts as a load balancer and two machines that do all the work. The load balancer runs nginx (static content + php proxying to workers) and mysql, the two workers run php5-fpm and memcached (pooled between workers). Here's beancounters for the balancer: tcpsndbuf 2171848 2386280 10000000 20000000 3947733 tcprcvbuf 1248288 1669504 10000000 20000000 0 Here's worker 1: tcpsndbuf 951976 1262672 20000000 40000000 0 tcprcvbuf 278528 393496 20000000 40000000 0 Here's worker 2: tcpsndbuf 989888 527472 20000000 40000000 0 tcprcvbuf 212992 452520 20000000 40000000 0 The balancer has 1GB ram, the two workers have 2GB ram each. What is eating my send buffer?

  Read the article

• diagnosing random power down crashes on a hackintosh [closed]

  - by Iain

  I have a hackintosh running on a Gigabyte P55M UD2. It has run without a single issue as a hackintosh for about 9 months, and the machine is about 2.75 years old. Never had issues when it was just linux box. Power supply is 750 Watts. It recently started spontaneously rebooting, no seeming connected to any particular use case or ram/cpu load. There is no hanging or anything, just suddenly acts like the power went out. The frequency of which seems to be increasing. I've tried using just one of each of the two ram sticks, and it happens with either one in. I'm not sure what to try next, is there some way of determinging whether it's a mobo, cpu, or powersupply issue short of replacing them all? thanks! Iain

  Read the article

• MySQL on a laptop for remote workers - MyISAM keeps corrupting

  - by Jonathon

  We have an application that is used by remote, mobile workers. It intalls WAMP (Server2Go) on a laptop and uses MySQL to store data locally. All tables are MyISAM. Once a day, the workers sync the database to our central server via HTTP scripts that query the data and post it to our site. The problem is that many of these laptop database tables are corrupting continually. It appears that MySQL acts like it saves the information (I don't get any query errors), but the table gets corrupt. I have to repair the table constantly (which removes several rows of data in the process). Does anyone have any ideas about how to work around this problem? Would it be wise to switch to InnoDB on the laptops? How about a different database system altogether. I have looked at MySQL Embedded, but it appears to be the same engine as the regular MySQL.

  Read the article

• Port based bandwidth shaping

  - by nixnotwin

  I have an interent connection with the speed of 4000k bits up and down. I want to do port based traffic shaping on a ubuntu machine, which acts as router. eth0 is the WAN interface. This is how I would like to allocate bandwidth: For ports 80 and 445 the bandwidth usage can go upto 90% For ports above 1024 upto 65535 the bandwidth usage can go upto 10% For remaining ports the bandwidth usage can go upto 40% The easiest way for achieving the above is using a router with tomato firmware. I have used it and it is very efficient. I want to try if it can be done on a Ubuntu or any GNU/Linux machine. I have googled extensively about the topic and I feel there isn't much information.

  Read the article

• Content Length and Transfer Encoding Chunked nginx, node-http-proxy

  - by rampr

  I have the following setup - node-http-proxy acts as a reverse proxy forwarding all requests to nginx/socket.io as necessary My problem is this When I send a HTTP DELETE request from the browser, node-http-proxy adds a header "Transfer Encoding Chunked" as the request from the browser had no Content Length. The request from the browser had no Content Length as it had no body. Nginx doesn't like the Transfer Encoding Chunked Header and throws a 411 asking for Content-Length. The problem gets solved when I send dummy data as part of the DELETE request so there is a Content Length and node-http-proxy doesn't add Transfer Encoding Chunked header and nginx is happy. I want to understand if node-http-proxy isn't working as expected, because it adds a Transfer Encoding Chunked header when Content Length is missing because there is no Content Body.

  Read the article

• Network trials and tribulations

  - by MauiWowie

  Hi, I am in the process of setting up a small (two PC's, both running Windows 7) network using a D-link DI-604 router (which acts only as hub, it's not set up in any way). In the Network and 'Sharing Center' in 'Control Panel' I clicked 'Set up a New (Connection or) Network'. All went well up until the moment I attempted to connect one PC with the other (in the 'Connect' dialog I entered the other PC's IP, no pwd). I can use both PC's to connect to and browse the net though, so the router/hub does not seem to be the problem. And I must have done something right, because the other computer shows up in the 'Network Map'. Any and all help is much appreciated!

  Read the article

• AutoHotkey media button for the NextSong button on Pandora

  - by Christian

  I tried doing the same thing that had been advised to do on the Play/pause pandora.com with a media key answer page. I simply replaced the XXX with 119 after running GetMediaKey - instead of 122 (it was same for me), which worked just fine for its play/pause purpose. I also replaced the YY with 11 since it was the appropriate (and next) tab. It does put the small, orange, dotted square around the next song button, but instead of going to the next song, it just acts like play/pause. Is there another modification required? Using Google Chrome in Windows 7 on an Alienware m14x r2.

  Read the article

• Web application design with distributed servers

  - by Bonn

  I want to build a web application/server with this structure: main-server sub-server transaction-server (create, update, delete) view-server (view, search) authentication-server documents-server reporting-server library-server e-learning-server The main-server acts as host server for sub-server. I can add many sub-servers and connect it to main-server (via plug-play interface maybe), then it can begin querying data from another sub-servers (which has been connected to the main-server). The sub-servers can be anywhere as long as connected to internet. The main-server can manage all sub-servers which are connected to it (query data, setting permission between sub-servers, etc). The purpose is simple, the web application will be huge as the company grows, so I want to distribute it into small connected plug-able servers. My question is, does the structure above already have a standardized method? or are there any different views? what are the technologies needed? I need a lot of researches before the execution plan begin. thanks a lot.

  Read the article

• Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

  - by BLAU

  My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

  Read the article

• 10 System LAN latency with ADSL modem as gateway

  - by itsoft3g

  Recently I expanded LAN in my office from 3 to 10 computers. Structure star topology, one ADSL Modem connected to One Switch which is again connected to 10 computers. Also we have Wifi device Netgear which is connected from switch. ADSL Modem acts as the DHCP Server, all the system will have default gateway IP (ADSL Modem's IP) Network latency is now become very high, All the chat severs disconnect often like google talk, skype etc, also internet become very very slow. when all the computer turned on. We have 4 Mbps Download and 100 Kbps upload Net speed. Its look like ADSL Modem cannot able to handle all the connections. I tried to setup a system as default gateway which will connect to modem, not sure how to do this. Please advice on this.

  Read the article

• Choosing a home network layout

  - by James M.

  I have a server, 4 PC's, a network printer, a switch and an ADSL modem. Currently the server runs Red Hat 9 and sits between the internet and the other PCs like in http://upload.wikimedia.org/wikipedia/en/1/12/Sample-network-diagram.png I have bought a new server PC to replace the old one, and I plan to install Fedora Core linux on it. The server acts as web and file server. The PCs all run Windows. Alternatively, I could connect the new server and all PCs to the switch, and connect the switch to the modem. (Sorry, couldn't find an image.) What are the pros and cons of these network layouts? Eg. in terms of reliability, security and flexibility? I am not a Linux guru but know of (and am not afraid of) iptables, dhcpd et al. Thank you for any tips, pointers and links.

  Read the article

• Feeding the kernels entropy source from other machines and/or increasing its maximum size

  - by David Spillett

  We have has a little trouble with a small box that acts as a VPN end-point and mail relay for our network, caused by the available entropy for /dev/random being too low (which causes TLS connection attempts by exim to fail). The machine doesn't do anything else, so the normal feed into the entropy pool (interrupt timings from things like disk access) is not enough. As a quick hack I've set a looping script that reads from /dev/hda at a couple of Mbyte/sec which keeps it topped up. Other than buying a hardware RNG, is there a clean way of piping data for entry from elsewhere, such as a copy of the data our file server uses for its entropy source? I've spotted several tips for using rng-tools to feed it from /dev/urandom on the same machine but that "feels dirty". Also, is it possible to increase the maximum pool size? It currently seems to max out at 3585.

  Read the article

• Keyboard Slow on a high power machine.

  - by Tim Pierson

  I am having a terrible time with my high powered machine. The keyboard is not displaying the keys as quickly as I type. Sometimes I have to wait up to a minute for the key to display. When I type ahead it sometimes loses characters. I am not sure where to start looking for this problem. It started about a month ago and I still have not figured out why. It does not always do it. But acts up about 2-3 minutes out of ever hour of use or thereabout. How can I look to isolate and find the problem, and solve it?

  Read the article

• Nginx save file to local disk

  - by Dean Chen

  My case is: In our China company, we have to access one web server in USA headquarter through Internet. But network is too slow, and we download many big image files. All our developers have to wait. So we want to setup a Nginx which acts as reverse proxy, its upstream is our USA web server. Question is can we make Nginx save the image files from USA web server into its local disk? I mean let Nginx act as one cache server.

  Read the article

• How to get full write permission on my second drive after dual boot?

  - by Shaul

  I had a WinXP installation on my hard drive. Then I bought a 2nd drive and installed Win7. Dual boot working fine. But when I'm in the Win7 environment, it appears that I don't have full admin permission on the "D" drive (that's the drive with WinXP). Even though the user I'm logged in as has admin permissions, I have to run my apps with administrator privileges in order to get write access to the D drive. This is not the case when I do stuff on the C drive. I could just get into running those apps that access the D drive in admin mode, but that seems like overkill. Is there some secret switch I can flip so that my D drive acts like my C drive, security-wise?

  Read the article

• Can I replace a router and DHCP server without disrupting traffic?

  - by SRobertJames

  I have a device which acts as a router and DHCP server. I'm replacing it, and would like to minimize down time. If I unplug it, and plug in a different device with the same IP, will all the PCs with DHCP leases keep on working? (I have DHCP Conflict detect on, so it shouldn't reassign a DHCP address already used). What if I want to change the IP (new subnet) - is there anyway to tell all the clients (Windows PCs) to release their DHCP leases and request new ones in a minute? If before unplugging the old device, I have it release all DHCP leases, will the Windows PCs automatically ask for new DHCP addresses?

  Read the article

• NAT for static private addresses

  - by biggdman

  Could someone please help me out with the following scenario: I have a machine that hosts 3 lxc containers, and acts like a router for them. The LXC containers have private ip addresses set on the interfaces that are connected to the host. I want to provide Internet access to the containers and I want to configure the host system so it translates only the addresses that are configured static on the lxc containers interfaces. Should I try to configure the host so it translates each of the 3 private addresses to the public address of the host's interface that is connected to the Internet?

  Read the article

• Ganglia multicast with clustering

  - by luckytaxi

  Let's say I have two hosts. One acts as the server where gmetad and a local gmond resides. It also has the web interface. I then have a client that only has gmond configure as follows. Anyways, everything works fine if i remove the mcast_join line from the udp_recv_channel If I leave it as is the UI doesn't show any hosts. I'm following the quick start guide found here In my gmond.conf file i have the following. udp_send_channel { mcast_join = host1 port = 8661 ttl = 1 } udp_recv_channel { port = 8661 retry_bind = true mcast_join = host1 bind = host1 } In my gmetad.conf file i have. data_source "Infrastructure" host1:8661 host2:8661

  Read the article

• Linux NetSec/IDS Bridge

  - by Blackninja543

  What I am looking to make is a linux system that acts as a bridge. It simple forwards any data sent on one device over to the next device. It does not attempt to block incoming attacks or redirect any traffic. What it does to is perform an IDS role on the network. Any suspicious activity is logged and reported. Snort would be one such piece of software however I was wondering what other solutions and ideas the rest of the community has.

  Read the article

• Bind include all zones in a folder

  - by alexcepoi

  I have a webapp that acts as a DNS manager, writing all zones to "/var/named". I would like to be able to configure named to load all zones in that folder, without explicitely having to tell it which zone goes to which file. Is that remotely possible? The reason for this is that i will be having a lot of zones added/deleted and a lot of records for each of them. I was thinking for using a database for that, but the idea of doing 500 record inserts scares me (it needs to be snappy). It's easier to write to a file. Any suggestions?

  Read the article

• How soon does nginx's token bucket replenish when limiting at requests per minute?

  - by Michael Gorsuch

  We've decided that we want to experiment and limit requests per minute instead of requests per second on our sites. However, I am confused by the burst parameter in this context. I am under the impression that when you use the 'nodelay' flag, the rate limiting facility acts like a token bucket instead of a leaky bucket. That being the case, the bucket size is equal to the burst parameter, and every time that you violate the policy (say 1 req/s), you have to put a token in the bucket. Once the bucket is full (being equal to the burst setting), you are given a 503 error page. I am also under the impression that once a violator stops going against the policy, a token is removed from the bucket at a rate of 1 token/s allowing him to regain access to the site. Assuming that I have the above correct, my question is what happens when I start regulating access per minute? If we chose 60 requests per minute, at what rate does the token bucket replenish?

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >