Search Results

Search found 2415 results on 97 pages for 'asus motherboard'.

Page 11/97 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Can I upgrade an Asus M51Sn laptop to 2x4GB of RAM? (DDR2)

  - by matteo

  My Asus M51Sn has 2 RAM slots which currently have 1x1GB + 1x2GB DDR2-800 SODimm RAM modules installed. I've found out that 4GB DDR2 SODimm modules do exist, though they are impossible to find in local stores nere here, but I've found them in online stores like these: http://www.pccomponentes.com/g_skill_ddr2_800_pc2_6400_4gb_so_dimm.html They seem to meet the specification, so can I replace both my current modules with 2x4GB modules, and reach a total of 8GB? Or should I worry about some limit (e.g. 4GB max or 2GB per slot) imposed by the matherboard, chipset or whatever? (I currently use Ubuntu 12.04 32 bit, so I plan to use the pae kernel, which supposedly supports 4GB ram on a 32bit system; or I may consider switching tu 64bit ubuntu; the question is about hardware limitations, not OS limitations).

  Read the article

• Patriot-2 RAM on ASUS PK5-E not running at PC2-8500?

  - by evan

  I have a P5K-E Motherboard and recently upgraded to 8GB of RAM (4 2GB sticks of PC2-8500 1066 MHz - Patriot Viper 2). When looking at the RAM with PC Wizard 2010 it's showing the RAM being recognized PC2-6500. I've read elsewhere that this is a common problem and requires manually changing the DRAM Voltage in BIOS to 2.2. I've done this and I'm still getting it recognized as PC2-6500. (I also manually set the FSB speed to 1066MHz instead of the AUTO). Any ideas on how to get this memory working properly? Thanks in advance!

  Read the article

• Win8 ASUS R503 - My PS/2 touchpad will not allow me to update to the required 8.0.5.0 version

  - by William Cha

  Details: Brand: ASUS Manufacturer: Toro Model: R503U Attemps: Fn+F9 does not work Cannot update from the 6.--(whatever version) to 8.0.5.0. Pros: 8.0.5.0 Allows Fn+F9 to function, which allows quick touchpad disabling. Cons: Cannot update; "Your driver is up to date." I want to play and type on this notebook laptop without excessive palm strokes on the touchpad. I have that name there, showing that this is a touchpad (PS/2) I do not want nor want to use. Does anybody have a good solution to this problem?

  Read the article

• Monitor displays "No VGA signal" "Check DVI cable" after installing motherboard drivers

  - by user1604220

  I bought computer with all of the needed parts, got everything sorted out, installed windows 7 but my CD-ROM doesn't fit my motherboard. So I had to download the driver manually and install it using USB disc. My motherboard: ECS elitegroup H61H2-M2, I downloaded it's drivers, installed the BIOS map or something, and then the computer forced a reboot after it was complete, after the reboot my monitor just stopped working and displayed No VGA signal, No DVI cable I think I've just installed the wrong driver, well but how can I sort it out? This is the driver I installed. On the book, it tells me to install the drivers, without the driver it won't see the Internet connection cable. I'm 100% sure there is nothing wrong with the monitor or it's cables. it stopped working exactly after the reboot after the installation.

  Read the article

• 3TB non-boot hard disk on older motherboard

  - by Bcos

  It is time to expand the capacity of my Ubuntu home file server so I would like to purchase some 3TB hard disks. However, I am concerned with potential compatibility issues. I've tried searching around but I haven't found information which clearly addresses my particular situation. My server is running Ubuntu 10.04 on an Intel P35 chipset based system. The motherboard does not support UEFI (and, by extension, GPT?). However, Ubuntu does support 2TB disks. Will I be able to properly utilize these new disks, or does the motherboard limitation trump all else? The boot disk is <2TB and will not be updated nor am I dual-booting; these disks will be used strictly as slaves in a pure Ubuntu environment. I'd hate to pull the trigger on these new disks just to be unpleasantly surprised, so any feedback is appreciated. Thanks!

  Read the article

• ASUS N56VZ-S4209P Screen saver, Screen dimming,sleep/hibernation mode not working according to power management settings

  - by Alto Roos

  I have a problem with my ASUS N56VZ-S4209P(Win8, I7-3630QM) laptop. If I use the fn+f7 command to turn off the screen it turns on by itself after a few seconds (the time varies between 1-10 seconds). In addition to this my screensaver doesn't activate at all and the laptop doesn't dim its screen after X minutes or goes into sleep/hibernation mode as specified in the power options when plugged in or on battery. As far as my knowledge goes it's not caused by the mouse or track pad at all since I can unplug my mouse and disable the track pad but the problem persist. I presume this is caused by the same problem? Does anyone know of a fix for this problem? It would be greatly appreciated. . . . I seem to have found a solution to the problem related to the screen that turns itself on again. The Power4Gear application has a setting which enables you to turn a "Presentation mode" "On" and "Off", if that setting is "Off" then it doesn't turn the screen on without any human interaction. Thus that part of the problem is fixed.

  Read the article

• ASUS unveils the DR-900 E-Reader

  ASUS UK let a few photos out on Flickr recently, showing the new DR-900 E-Reader. The leading tech blogs picked up on the story, but ASUS didn?t give much away about the DR-900?s specification ? but ... [Author: James Kidder - Computers and Internet - April 04, 2010]

  Read the article

• PC won't boot with 4 prong CPU connector connected. Motherboard or CPU dead - which one? Both?

  - by scrot

  In the middle of use, my computer shut down. I tried to turn it on but it maybe comes on for half a second, shuts down, then flickers again very quickly about 2 seconds later before giving up completely. So I took everything apart and nailed it down to the power supply, the mobo, or the CPU. I had an extra old power supply around, hooked that up and it had the same problems, so that can't be it. When the 4 prong CPU connector is not connected, the motherboard 'functions' in that it stays on and runs the heat sink etc. Throw in the 4 prong connector and that's when it doesn't stay on. So it must be the CPU, right? Motherboard: ASUS P6X58D CPU: Intel i7-920 Bot are under warranty (supposedly) - should I get both replaced or what?

  Read the article

• Is it dangerous if you drop a metal object(like a screw) on a motherboard that is powered on?

  - by ULTRA_POROV

  I am not very good with electricity so I can only guess. So should i be careful with screws and stuff when the pc is on?

  Read the article

• Proper multimeter specs for fixing capacitors on your motherboard?

  - by Xeoncross

  When our motherboards or LCD's go out it is possible that the capacitors are at fault and can be easily replaced by removing and replacing the bad caps rather than buying new screens or computers. After all, replacing a cap is much faster than building a new PC. Along those lines some of the capacitors I see on my boards are over 900µF. What is the bare minimum you need in a multimeter to test for bad capacitors (or good capacitance?)

  Read the article

• How to find motherboard serial number from C program?

  - by Vikram Phaneendra

  How can I find motherboard serial number and hard disk information and processor information from C program?

  Read the article

• Motherboard P5Q SE2 - GeForce GT210 - Intel Core 2 Duo E4400 - ubuntu compatibility

  - by Massimo

  I'm completely new to Ubuntu (and Linux in general), my target (as first PC) is to assemble it in order to have a Media Center. As you read in the subject I have the following components : Motherboard Asus P5Q SE2 GeForce GT210 1GB Intel Core 2 Duo E4400 The remaining parts have to be purchased. I'd like to know if they are compatible with Ubuntu 12 that is the last version. Thanks for any help Massimo

  Read the article

• No network connectivity (not wired or wireless) - RT5390

  - by Ben Udy

  I am starting to think I simply need to accept a small loss and sell my new ASUS K73E. Because I really don't enjoy computing when I have to deal with Windough$ and this windows 7 64 bit on my new ASUS is even worse than the old machines with XP. I have written to ASUS and they simply say "We don't support Linux" and while Ralink's website says they do support Linux I can't get anyone to tell me what model Ralink card might be in my machine. Is anyone out there who might be able to give me some useful advice???? Here is the answer to command lspci nn && lsusb && lsmod && rfkill list all: di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 Edit #2 lspci 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c49 (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 02:00.0 Network controller: RaLink Device 5390 03:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0) lsusb Bus 002 Device 002: ID 8087:0024 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks Bus 001 Device 002: ID 8087:0024 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks for the suggestion because this gave me a model for Ralink RT5390. I have now gone to Ralink.com and downloaded (via Windows 7) the driver package (it is a bz2 file). I hope I can figure out how to install it. And FYI - I was not able to run su (not authorized?) and dmidecode didn't exist (probably needs to be downloaded BUT no internet yet in Ubuntu)

  Read the article

• Motherboard and Processor sync error panic and killing init

  - by pradeep

  I have installed Ubuntu 12.04LTS for the first time and this has problems while working. the system hangs out and panic error showing the message that motherboard and processor not syncing and attempted to kill init. I have a Gigabyte GA-MA74GMT-S2(AM3) board AMD Phenom II X2 555 processor 4gb ddr3 ram with L6 cache I would like to know why is this problem happening. this is a separate installation and system is also having windows7 running as a separate installation. need help fixing this.

  Read the article

• Loud fans despite cool system under Linux (but not Windows)

  - by Sman789

  My new desktop computer runs almost silently under Windows, but the fans seem to run on a constantly high setting under Linux. Psensor shows that the GPU (with NVidia drivers) is thirty-something degrees and the CPU is about the same, so it's not just down to Linux somehow being more processor-intensive. I've read that the BIOS controls the fans under Linux, which makes sense given the high fan speeds when in BIOS as well. It's under Windows, when the ASUS AI Suite 3 software seems to take control, that the system runs more quietly and only speeds the fans up when required. So is there a Linux app which offers a similar dynamic control of the fans, or a setting hidden somewhere in the ASUS BIOS which allows the same but regardless of the OS? EDIT - I've tried using lm-sensors and fancontrol, but pwmconfig tells me "There are no pwm-capable sensor modules installed". This is after the sensors-detect command does find an 'Intel digital thermal sensor', and despite the sensors working fine in apps like psensor. Help getting this to work would likely solve the problem.

  Read the article

• Intel Matrix Storage Manager not showing on Asus P5W DH Deluxe?

  - by Leon

  I have set, under "Main" - "IDE Configuration" - "Configure SATA as" to "Raid" and "Onboard Serial-ATA BootRom" to "Enabled", but upon POST I still do not see the Intel Matrix Storage Manager screen where I can press Ctrl+I to set up my raid? I have the latest BIOS version EDIT: Although I had set the rom to "enabled", I then went and reset the bios settings to default. I then set the bootrom setting to "disabled", restarted and then "enabled" again and it seemed to work.

  Read the article

• My Asus K40IN hangs after a ram upgrade was installed, how do I fix this?

  - by el

  From a 2GB RAM I upgraded the K40IN and added another ram to make it into 4GB. what happens is it hangs a lot. Especially right when I boot/startup the laptop. Would updating the resolve this problem, if it does how do I update the bios? And where can I get the BIOS for the update?

  Read the article

• ASUS EeePC Fn+F2 ruins wireless until restart

  - by dawmail333

  I managed to get my wireless working beautifully (ath5k driver working great), and it works over a disable/enable wireless cycle, even a suspend/wakeup cycle (read some people have issues with that). Unfortunately, I discovered that if I press Fn+F2 on my keyboard (Asus EeePC 900HA, so that's the wireless toggle key), wireless then stops working until I restart the computer. How can I fix this? I'm running UNR 10.10 (with Unity turned off tyvm!). I heard something about Jupiter controlling these keys, but what about asus-laptop? How can I fix this behaviour? TIA. (Note, I'm a power user, but still fairly new to Linux. I'm picking up speed though).

  Read the article

• Motherboard HDDPWR1 connector

  - by Eric Leschinski

  I need help identifying the name of a connector. I have a Gateway DX4870-UB318 computer, I opened the case and wanted to attach another hard drive, but to my surprise one existing SATA hard drive was connected to the motherboard with this connector: And here is the spot on the Motherboard where the power was supplied. What is the name of this adapter and where can I get another one? Clues: This computer was bought new October 2013 from best buy, box number: DX4870-UB318. The gateway folks won't divulge the type of motherboard it has nor give specs on it. On the wire itself is an identification code: H.35090NJ01-000 Next to the connector on the motherboard it says: HDDPWR1 and the second one says HDDPWR2. This cable has two SATA power connectors and one mystery connector. The power supply has no molex power cables and no SATA power connectors! This is the most bizarre hard drive power system I've seen. I guess the motherboard folks are trying to remove the burden for desktop power supplies to provide adapters (molex, SATA, other) to CD's and hard drives. Can someone put a name on that white flat 6 pin HDD Power Connector? My Solution I can buy a "SATA Power Y Splitter Cable" to provide more spaces to power sata devices.

  Read the article

• further troubleshooting on a p8z77 motherboard

  - by Journeyman Geek

  I just bought a brand now asus p8z77 motherboard with a intel 3770. Its currently not booting - the system powers up for half a second and then powers down, and the CPU error light shines. I've tried switching ram between slots, switching PSUs, updating the bios (which can be done sans processor or ram on this model). Power: The 8 pin power connector is definitely in place correctly, and I've tried swapping PSUs between a new seasonic m12, and a known good cheapie PSU Ram: Ram is in the recommended slot for single stick operation, and tried swapping between the two sticks of DDR3 I have. Processor: Its installed correctly as far as I can tell, no obvious bent pins on the motherboard. At this point I'm guessing I'll need to RMA something. Are there any 'definitive' tests I can try, short of swapping CPU and motherboard that would let me know it is the CPU? Can I actually trust the error light on the motherboard?

  Read the article

• anti-static foam under a motherboard?

  - by user29734

  I am modding out a custom built case/system. I have my motherboard mounted on a metal tray, (Dell did this) has been working great. Not I am modding the case to hold everything and how I want to mount the motherboard on the tray I have a slight gap between the wall of the case and the motherboard/tray. Can I put a piece of thin anti-static foam/packaging in between the tray and the case? That is safe right?

  Read the article

• Sound driver for motherboard gigabyte ga-g1975x-c (Creative Sound Blaster Live 24-bit) (alsa, ca0106)

  - by Mikl

  My motherboard is gigabyte ga-g1975x-c with integrated audio "Creative Sound Blaster Live 24-bit". I have installed Ubuntu 10.10, and there was no sound at all. Alsa drivers was already installed. Finally after long searching, i have found how to make my sound work. /etc/modprobe.d/alsa-base.conf: options snd-ca0106 subsystem=0x10121102 //i have added this line and restart After restarting my speakers and microfon works fine. Maybe somebody knows different/better subsystem code for my sound card???

  Read the article

• Issues with Dz77BH-55K Motherboard and i7 processor on 12.04

  - by Naveed

  I just built a computer with Intel's DZ77BH-55K motherboard with i7-3770 processor. On 12.04, 11.10, and 11.04 and Linux Mint 12, the computer has been really laggy. The graphics aren't working (choppy effects, bad resolution) and the keyboard and mouse inputs are even laggy and unreliable (skips keystrokes). I'm not sure what the problem is or what I can do to fix it. I tried sudo apt-get install mesa-utils but nothing changed. I've also messed around in the BIOS but no luck there either. Any ideas? Could it possibly be a hardware issue?

  Read the article

• Old HP computer powers off after seconds, hard drive still spins. Power supply? Motherboard?

  - by Chase

  Someone called me saying their computer keeps shutting off. I brought it home to troubleshoot. It's an HP Pavilion 513c. The computer powers on normally but almost immediately powers off. Sometimes it manages to make it to a fully loaded desktop and other times it powers off during the boot process. The hard drive still spins but there is no video and the CPU fans quit spinning. The power has to be unplugged before you can turn it back on again. I'm thinking it's either a motherboard or power supply issue. I don't have a spare of either component laying around to test with. Any guess on which part is more likely to be the culprit? Thanks.

  Read the article

• How to connect to my own WiFi using Broadcom STA drivers?

  - by Chris

  I'm trying hard to switch to Linux from Windows because of my engineering project. Unfortunately, everything is against that change! Before I have installed Broadcom STA proprietary drivers, I was seeing on NetworkManager and nm-applet only local radio-internet-access networks. After I installed Broadcom STA, I see my neighbor's wireless network (channel 11, WEP) Neither before nor after the installation is own wireless network available. Computer: Asus Lamborghini VX6 Ubuntu: 12.04 LTS 64-bit Router: ASUS N55U (A1) with newest AsusWRT firmware Network: Channel 5 (tried also 10 and 11, both on 20 and 40MHz bands), WPA2 Personal, 2,4 + 5 GHz (what is not very important, 'cause the wlan card in VX6 is only 2,4GHz). Network works fine on Windows, also through D-Link repeater on the other floor. Unfortunately, same network is invisible to Ubuntu on same machine. I have tried some combinations with other GUIs but it did not work. Are there any better drivers for Ubuntu? I need that network badly, but I'm an Ubuntu newbie, so I don't know how to solve that problem. Please help.

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >