Search Results

Search found 65160 results on 2607 pages for 'compile time constant'.

Page 11/2607 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

  • Setting up a Time Capsule with port forwarding

    - by Kaji
    Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

    Read the article

  • Setting up a Time Capsule with port forwarding

    - by Kaji
    Our old AirPort Extreme station hit EOL, so we decided to upgrade it to a Time Capsule. Along the way, we're trying to also set it up with a separate guest network and port forwarding/NAT, however we're having trouble setting it up so that the time capsule is handling the DHCP leases instead of the router. We've got DSL through Verizon through a Westell modem/router to the Time Capsule. Done the RTFM thing, and we haven't been able to get it to work. Can anyone explain how to get things set up properly for this configuration?

    Read the article

  • Time Machine (archive) of pre-Leopard systems?

    - by benc
    I want to get off an older Mac OS X system permanently. It is an iBook G3, so that has two important characteristics: Power PC, not Intel based. Runs only Tiger, not Leopard. This means, as far as I can tell: Cannot run Time Machine directly. Here's the approach I have been contemplating: Mount the drive in Firewire mode. Back up the drive as a external drive to the Time Machine volume. Disconnect the drive (permanently). However, I'm concerned that this drive will eventually age out, when the Time Machine volume fills up, and the old-system-as-external-drive is gone. Would it be better to do a single backup with another utility, to shared disk?

    Read the article

  • Time machine link error

    - by robinjam
    When attempting to perform a Time Machine backup, the backup appears to proceed as normal, until it finishes copying files at which point it complains that an "error occurred while linking files for" one of my external hard disks. During the previous backup that particular disk was in fact empty, and therefore I can't understand why Time Machine is attempting to link back to it. But alas. I've verified all my disks using Disk Utility and they all appear to be fine. Does anybody know what causes this error, and how I might go about fixing it? Failing that is there a way to force Time Machine to create a brand new backup rather than an incremental one? Thanks in advance!

    Read the article

  • System time wrong after running ntpdate because DST ignored

    - by Ian Dunn
    When I run ntpdate, my system clock displays the time as an hour behind what it should be. I know that ntpdate does everything in UTC, so I'm guessing there's a timezone setting wrong and it's ignoring Daylight Savings Time, but I can't figure it out. Here's what I've done so far: ln -sf /usr/share/zoneinfo/EST /etc/localtime to set the timezone Set UTC=true in /etc/sysconfig/clock so that DST will be automatically applied date -s hh:mm::ss to set system clock correctly hwclock -systohc --utc to set the hardware clock correctly At this point date and hwclock both display the correct time. But if I then run ntpdate 0.us.pool.ntp.org, the date output is an hour behind what it should be. I've looked at a dozen tutorials and can't figure out what I'm doing wrong. Does anyone have any ideas?

    Read the article

  • Copying single files into a folder that changes name every time the batch file is executed

    - by Daniel Jochem
    Can you please help, I am using this to put the text files made by the batch file into the folder created by the batch file as well. but my problem is that the name is changed of the new folder every time because it is named by the date and time it was created. This is the code: @echo off for /F " tokens=1,2,3* delims=/, " %%i IN ('date /T') DO ( set CUR_DAY_OF_WEEK=%%i set CUR_MONTH=%%j set CUR_DAY=%%k set CUR_YEAR=%%l) for /F " tokens=1,2,3* delims=:, " %%i IN ('time /T') DO ( set CUR_HOUR=%%i set CUR_MIN=%%j set AM_PM=%%k) if not exist E:\Private goto :F cd E:\Private md "E:\Private\%CUR_HOUR%.%CUR_MIN%%AM_PM% %j%%CUR_MONTH%-%CUR_DAY%-%CUR_YEAR%" goto :start :F if not exist F:\Private goto :G cd F:\Private md "F:\Private\%CUR_HOUR%.%CUR_MIN%%AM_PM% %j%%CUR_MONTH%-%CUR_DAY%-%CUR_YEAR%" goto :start :G cd G:\Private md "G:\Private\%CUR_HOUR%.%CUR_MIN%%AM_PM% %j%%CUR_MONTH%-%CUR_DAY%-%CUR_YEAR%" goto :start :start start /min A /stext A.txt start /min B /stext B.txt start /min C /stext C.txt start /min D /stext D.txt (As the directory (E:-G:) changes, how can I check all without an error? And once that is found, then put all these text files into the date folder.

    Read the article

  • Vista: "Change date and time" causes permissions error

    - by alexsome
    I double-click on the time in the bottom right to open the date and time panel. Then I click on the "Change date and time..." button (which has a shield) and I get the UAC dialog. I click "Continue", then am presented with an error that reads: Unable to continue You do not have permission to perform this task. Please contact your computer administrator for help. I will mention I have Comodo installed, but I have turned it off to test this out and I get the same results. All that I've found while googling were suggestions to turn UAC off, but I am interested in learning what the actual problem is. Thanks in advance.

    Read the article

  • Time Synch Architecture in Windows Domain Environment

    - by Param
    I just read the following article -- "In a domain, time synchronization takes place when Windows Time Service turns on during system startup and periodically while the system is running." ( http://technet.microsoft.com/en-us/library/cc779145%28v=ws.10%29.aspx ) From the above article i get to know that the first sync it take as soon as i start my system, but after that in how many minutes or second or in how many periodic interval my windows client ( Window XP, window7 or window server 2008 member ) synch with my Domain controller (PDC emulator )??? Do you have any idea, and how should i verify my synch time interval? My Domain Controller is Window server 2008 R2 Standard

    Read the article

  • Permissions restoring from Time Machine - Finder copy vs "cp" copy

    - by Ben Challenor
    Note: this question was starting to sprawl so I rewrote it. I have a folder that I'm trying to restore from a Time Machine backup. Using cp -R works fine, but certain folders cannot be restored with either the Time Machine UI or Finder. Other users have reported similar errors and the cp -R workaround was suggested (e.g. Restoring from Time Machine - Permissions Error). But I wanted to understand: Why cp -R works when the Finder and the Time Machine UI do not. Whether I could prevent the errors by changing file permissions before the backup. There do indeed seem to be some permissions that Finder works with and some that it does not. I've narrowed the errors down to folders with the user ben (that's me) and the group wheel. Here's a simplified reproduction. I have four folders with the owner/group combinations I've seen so far: ben ~/Desktop/test $ ls -lea total 16 drwxr-xr-x 7 ben staff 238 27 Nov 14:31 . drwx------+ 17 ben staff 578 27 Nov 14:29 .. 0: group:everyone deny delete -rw-r--r--@ 1 ben staff 6148 27 Nov 14:31 .DS_Store drwxr-xr-x 3 ben staff 102 27 Nov 14:30 ben-staff drwxr-xr-x 3 ben wheel 102 27 Nov 14:30 ben-wheel drwxr-xr-x 3 root admin 102 27 Nov 14:31 root-admin drwxr-xr-x 3 root wheel 102 27 Nov 14:31 root-wheel Each contains a single file called file with the same owner/group: ben ~/Desktop/test $ cd ben-staff ben ~/Desktop/test/ben-staff $ ls -lea total 0 drwxr-xr-x 3 ben staff 102 27 Nov 14:30 . drwxr-xr-x 7 ben staff 238 27 Nov 14:31 .. -rw-r--r-- 1 ben staff 0 27 Nov 14:30 file In the backup, they look like this: ben /Volumes/Deimos/Backups.backupdb/Ben’s MacBook Air/Latest/Macintosh HD/Users/ben/Desktop/test $ ls -leA total 16 -rw-r--r--@ 1 ben staff 6148 27 Nov 14:34 .DS_Store 0: group:everyone deny write,delete,append,writeattr,writeextattr,chown drwxr-xr-x@ 3 ben staff 102 27 Nov 14:51 ben-staff 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown drwxr-xr-x@ 3 ben wheel 102 27 Nov 14:51 ben-wheel 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown drwxr-xr-x@ 3 root admin 102 27 Nov 14:52 root-admin 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown drwxr-xr-x@ 3 root wheel 102 27 Nov 14:52 root-wheel 0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown Of these, ben-staff can be restored with Finder without errors. root-wheel and root-admin ask for my password and then restore without errors. But ben-wheel does not prompt for my password and gives the error: The operation can’t be completed because you don’t have permission to access “file”. Interestingly, I can restore the file from this folder by dragging it directly to my local drive (instead of dragging its parent folder), but when I do so its permissions are changed to ben/staff. Here are the permissions after the restore for the three folders that worked correctly, and the file from ben-wheel that was changed to ben/staff. ben ~/Desktop/test-restore $ ls -leA total 16 -rw-r--r--@ 1 ben staff 6148 27 Nov 14:46 .DS_Store drwxr-xr-x 3 ben staff 102 27 Nov 14:30 ben-staff -rw-r--r-- 1 ben staff 0 27 Nov 14:30 file drwxr-xr-x 3 root admin 102 27 Nov 14:31 root-admin drwxr-xr-x 3 root wheel 102 27 Nov 14:31 root-wheel Can anyone explain this behaviour? Why do Finder and the Time Machine UI break with the ben / wheel permissions? And why does cp -R work (even without sudo)?

    Read the article

  • Windows Server 2008 R2 time keeps changing unexpectedly

    - by lmhost
    There is a serious problem with one of my servers time. At some random hours (5:59 localtime in the following example) it goes 1 hour back and keeps doing this again and again next times it reaches 5:59. Like this: 5:59-4:59 … 5:59- 4:59 and so on. It stays in the loop until I manually update its time. The server OS is Windows 2008 R2 Standard x64, acting as a standalone web server on the internet. time zone (UTC-05:00). system log: Information 4/13/2012 5:59:34 PM Kernel-General 1 None Information 4/13/2012 5:59:34 PM Kernel-General 1 None Information 4/13/2012 5:59:34 PM Kernel-General 1 None Information 4/13/2012 5:59:34 PM Kernel-General 1 None Information 4/13/2012 5:59:34 PM Kernel-General 1 None Information 4/13/2012 5:59:34 PM Kernel-General 1 None all of the above entries have same content: The system time has changed to ?2012?-?04?-?13T21:59:34.500000000Z from ?2012?-?04?-?13T22:59:34.500000000Z. Details XML View: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-Kernel-General" Guid="{A68CA8B7-004F-D7B6-A698-07E2DE0F1F5D}" /> <EventID>1</EventID> <Version>0</Version> <Level>4</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000010</Keywords> <TimeCreated SystemTime="2012-04-13T21:59:34.500000000Z" /> <EventRecordID>4060</EventRecordID> <Correlation /> <Execution ProcessID="4" ThreadID="80" /> <Channel>System</Channel> <Computer>********</Computer> <Security UserID="S-1-5-18" /> </System> - <EventData> <Data Name="NewTime">2012-04-13T21:59:34.500000000Z</Data> <Data Name="OldTime">2012-04-13T22:59:34.500000000Z</Data> </EventData> </Event> Any idea about what’s going on? Thanks

    Read the article

  • Are Time Machine backups secure?

    - by Leandro Ardissone
    I have my Time Machine backups on an external disk (WD My Passport with no hardware encryption) and I'm worried if the data stored on the disk is safe in case somebody steals it and connect it to any Mac/PC. Does any Mac can browse the Time Machine backups? Or are they encrypted in any way? If no, is there a way to improve security of the backups, should I buy a hardware encryption based HD? Thanks.

    Read the article

  • Why does CPU processing time matter when compared to real wall clock time?

    - by PeanutsMonkey
    I am running the command time 7zr a -mx=9 sample.7z sample.log to gauge how long it takes to compress a file larger than 1GB. The results I get are as follows. real 10m40.156s user 17m38.862s sys 0m5.944s I have a basic understanding of the difference but don't understand how this plays a role in the time in takes to compress the file. For example should I be looking at real or user + sys?

    Read the article

  • DirectX10 How to use Constant Buffers

    - by schnozzinkobenstein
    I'm trying to access some variables in my shader, but I think I'm doing this wrong. Say I have a constant buffer that looks like this: cbuffer perFrame { float foo; float bar; }; I got an ID3D10EffectConstantBuffer reference to it, and I can get a specific index by calling GetMemberByIndex, but how can I figure out how many members perFrame has so that I can get each member without going out of bounds?

    Read the article

  • DirectX 11 Constant Buffers vs Effect Framework

    - by Alex
    I'm having some trouble understanding the differences between using constant buffers or using the effect framework of DirectX11 for updating shader constants. From what I understand they both do exactly the same thing, although from reading the documentation it appears as if using effects is meant to be 'easier'. However they seem the same to me, one uses VSSetConstantBuffers and the other GetConstantBufferByName. Is there something I'm missing here?

    Read the article

  • Windows 7 XP Mode disable time sync

    - by Oskar Duveborn
    So I've tried the trick from Virtual PC 2007, adding the following section to the vmc configuration file: <components> <host_time_sync> <enabled type="boolean">false</enabled> </host_time_sync> </components> Later someone suggested VPC doesn't want the components level so added this instead: <host_time_sync> <enabled type="boolean">false</enabled> <frequency type="integer">15</frequency> <threshold type="integer">10</threshold> </host_time_sync> When I start up XP Mode (Microsoft Virtual PC) it completely ignores any of these two configuration changes and if I change the clock it's instantly reset to the host time again. I've also obviously disabled the Windows Time service but as it's not joined to a domain or set up with a source it shouldn't be involved anyway. I need to test an application over a few midnight passes and thought the XP Mode machine would be perfect, so I didn't have to mess with my workstation clock... is there any way to get the VPC guest to not sync time with the host? This is easy in Hyper-V ;p

    Read the article

  • Time Machine doesn't back up some folders/files (that it should)

    - by Eric
    MacBook Pro 17" (Snow Leopard) -- WD 2TB external drive MacBook Pro 13" (Snow Leopard) -- Seagate 1TB external drive I find that Time Machine sometimes doesn't back up new folders (and the files in them). This occurs both when I choose "Back Up Now" from the Time Machine icon in the Menu Bar and in TM's scheduled backups. These are not excluded folders (nor are then in the TM do-not-back-up list); they're perfectly normal folders (at various locations) inside my home folder. The only way to force them to be backed up is to restart the computer (unmounting & mounting the TM external disk does not help). There seems to be a correlation with new folders (i.e., it's more likely to happen that an entire new folder is not backed up), but this may just be observer bias (because those are the folders that I go check to see if they've been backed up). It's not computer dependent (it happens on two different computers). It's not external disk dependent (it happens on two different external disks). It's not time dependent (not restarting for several days does not fix the problem). What does a restart change that these other events don't? I'm considering deleting the /.fseventsd folder (without restarting the computer) to see if that helps. I haven't tried logging out and logging in (without restarting the computer).

    Read the article

  • Error during Time Machine backups on OS X Lion

    - by user92401
    After I turn on my machine, the first couple of Time Machine backups seem to go OK, but after about an hour I get this error: Unable to complete backup. An error occurred while creating the backup folder. Latest successful backup: 7/31/11 at 12:32 PM I'm running 10.7. Time Machine is backing up an internal HD to an external USB HD. I've already run Disk Utility to repair the Time Machine partition. It's a relatively new hard drive and didn't have any issues. Here's what I've found in the Console's log filtered for backupd: 7/31/11 12:31:21.223 PM com.apple.backupd: Starting standard backup 7/31/11 12:31:21.447 PM com.apple.backupd: Backing up to: /Volumes/MyMac TM Backup/Backups.backupdb 7/31/11 12:31:29.146 PM com.apple.backupd: 983.7 MB required (including padding), 391.90 GB available 7/31/11 12:32:19.471 PM com.apple.backupd: Copied 3156 files (36.0 MB) from volume Macintosh HD. 7/31/11 12:32:20.017 PM com.apple.backupd: Copied 3173 files (36.0 MB) from volume LI. 7/31/11 12:32:20.136 PM com.apple.backupd: 934.8 MB required (including padding), 391.86 GB available 7/31/11 12:32:54.755 PM com.apple.backupd: Copied 916 files (117.8 MB) from volume Macintosh HD. 7/31/11 12:32:54.894 PM com.apple.backupd: Copied 933 files (117.8 MB) from volume LI. 7/31/11 12:32:55.937 PM com.apple.backupd: Starting post-backup thinning 7/31/11 12:32:55.937 PM com.apple.backupd: No post-back up thinning needed: no expired backups exist 7/31/11 12:32:55.960 PM com.apple.backupd: Backup completed successfully. 7/31/11 1:21:28.624 PM com.apple.backupd: Starting standard backup 7/31/11 1:21:28.631 PM com.apple.backupd: Backing up to: /Volumes/MyMac TM Backup/Backups.backupdb 7/31/11 1:21:28.682 PM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/MyMac TM Backup/Backups.backupdb/Will’s Mac Pro size:37 7/31/11 1:21:28.683 PM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/MyMac TM Backup/Backups.backupdb/Will’s Mac Pro size:37 7/31/11 1:21:38.694 PM com.apple.backupd: Backup failed with error: 2

    Read the article

  • Apple Airport Express, Extreme and Time Capsules, BT Home Hub, Wireless Extenders confusion

    - by Jamie Hartnoll
    I post quite frequently in Stack Overflow, but use Superuser less frequently. Mainly as I don't change hardware often and rarely have software issues! I live in a small stone cottage, and have an office in a separate building across a yard. I have a BT Homehub which is located in the cottage and a series of Ethernet cables running across the yard to the office. This is fine for my wired stuff. My main office computers are PCs running Windows 7 Ultimate, and one on Win7 Home, all working fine. I also have an old laptop on Win XP which works fine wirelessly in the house for those evenings in front of the TV catching up on a bit of work. I also have an iPhone and an iPad. Recently, I have been trying to get WiFi in the office so I can use Adobe Shadow (or whatever it now is!) to improve mobile web development efficiency using my iPhone and iPad, so I bought this: http://www.ebuyer.com/393462-zyxel-wre2205-500mbps-powerline-wireless-n300-range-extender-wre2205-gb0101f Thinking that would be lovely just plugged into the socket by the door in the office, extending the perimeter of the WiFi from my Homehub. I can't get it to work properly! If I plug a laptop into its ethernet port I can get it to connect to the Homehub and give me a kinda of wired, wireless extender. If, however, I plug the ethernet port into my home hub, it then seems to extend the network, but only my iOs devices work, and all my wired stuff stops working, and seems to create an infinite loop where windows connects to my homehob, and then rather to the internet, it then connects back to the extender thing. Anyway... in the meantime, I took a fatal trip to the Apple Store, where I purchased an Airport Express... solely for the purpose of hooking my iOs devices up as wireless music players in the house. I knew it had WiFi, but didn't want to use that part as an extender, I didn't think it would work on a Homehub anyway. It doesn't work on a Homehub! I now have a new wireless network in the house, which, when anything connects to it cannot connect to the Internet, so it works ONLY as a wireless music player. I then borrowed some Powerline Adaptors from someone and realised that this whole thing was getting totally out of control! It seems all the technology is out there but it's so complicated to get the right series of devices. To further add to the confusion, I wouldn't mind a network hard drive. I bought one that broke and lost everything, so now we're on to looking at the Apple Time Capsules. So my question is... IF... I buy an Apple Time Capsule, can I: Hook that up to my Homehub, leaving the homehub connected to the Internet so my Hub phones still work, then disable wireless on the homehub Link up my Airport Express to the Time Capsule PROPERLY so it will connect to the Internet Do the above with an Apple TV box should I buy one in future Use the Time Capsule as a network hard drive to store video and music that can be viewed/listened to via my iOS devices/Apple TV/Aiport Express anywhere even with my main PC off (this currently stores all this data) Hope that the IOS devices like the WiFi from the TimeCapsule better than the Homehub and work without extension, or buy another Airport Express to get WiFI in the office. Or... should I buy an Airport Extreme and use a USB hard drive for the network drive?

    Read the article

  • file.createNewFile() creates files with last-modified time before actual creation time

    - by Kaleb Pederson
    I'm using JPoller to detect changes to files in a specific directory, but it's missing files because they end up with a timestamp earlier than their actual creation time. Here's how I test: public static void main(String [] files) { for (String file : files) { File f = new File(file); if (f.exists()) { System.err.println(file + " exists"); continue; } try { // find out the current time, I would hope to assume that the last-modified // time on the file will definitely be later than this System.out.println("-----------------------------------------"); long time = System.currentTimeMillis(); // create the file System.out.println("Creating " + file + " at " + time); f.createNewFile(); // let's see what the timestamp actually is (I've only seen it <time) System.out.println(file + " was last modified at: " + f.lastModified()); // well, ok, what if I explicitly set it to time? f.setLastModified(time); System.out.println("Updated modified time on " + file + " to " + time + " with actual " + f.lastModified()); } catch (IOException e) { System.err.println("Unable to create file"); } } } And here's what I get for output: ----------------------------------------- Creating test.7 at 1272324597956 test.7 was last modified at: 1272324597000 Updated modified time on test.7 to 1272324597956 with actual 1272324597000 ----------------------------------------- Creating test.8 at 1272324597957 test.8 was last modified at: 1272324597000 Updated modified time on test.8 to 1272324597957 with actual 1272324597000 ----------------------------------------- Creating test.9 at 1272324597957 test.9 was last modified at: 1272324597000 Updated modified time on test.9 to 1272324597957 with actual 1272324597000 The result is a race condition: JPoller records time of last check as xyz...123 File created at xyz...456 File last-modified timestamp actually reads xyz...000 JPoller looks for new/updated files with timestamp greater than xyz...123 JPoller ignores newly added file because xyz...000 is less than xyz...123 I pull my hair out for a while I tried digging into the code but both lastModified() and createNewFile() eventually resolve to native calls so I'm left with little information. For test.9, I lose 957 milliseconds. What kind of accuracy can I expect? Are my results going to vary by operating system or file system? Suggested workarounds? NOTE: I'm currently running Linux with an XFS filesystem. I wrote a quick program in C and the stat system call shows st_mtime as truncate(xyz...000/1000).

    Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >