Search Results

Search found 300 results on 12 pages for 'cu jimmy'.

Page 11/12 | < Previous Page | 7 8 9 10 11 12  | Next Page >

• Desktop PC does not power up on power button

  - by hIpPy

  When I press the power button on my desktop, it does not power up completely. Before I press the power button, I see lights on the motherboard. Everything is normal. On power button press, the fans on the cpu, graphics card and motherboard start to spin a little for a second or two and then they stop. No beeps during this process. It has been doing this for a while now but it used to start up after some trials. Once it starts up, I have NO issues at all like random shutdowns so it is not an issue with OS. Update: I left the desktop off for a few days and it started. I'm just guessing here but it seems as if the PSU (Antec TP2-550ATX) is dying out and does not have enough power now - just a guess. It's an old desktop assembled in 2005 but I have maintained it well. Update: I always keep the desktop running and I never shut it down. During updates or manual restarts, it powers up without issues. I wonder if this sheds lights on the issue. Any idea how I can narrow down the issue? ex: if I can find if the PSU is dying etc. I'd really like to fix the issue. Please help. Thanks. Below is the complete configuration. DFI LAN-Party UT NF4 Ultra-D 6/23 {6.70}, Evercool EC-VC-RE 41/47C, AMD Opteron 170 2.0GHz {1.3.2.16} 1.312V 36/41C, ThermalRight SI-120, Panaflo 120×38mm OCZ Platinum 2×1GB 200MHz 2.66V 3-3-2-7 1T XFX 7800GTX 256MB 475/1250MHz {91.31}, Zalman VF900 Cu led 41/56C WD Caviar 320GB 7200RPM 16MB SATA 3Gb/s Antec TP2-550ATX Antec P180 WinXP sp3 Logitech MX310 Razer Mantis Speed BenQ FP91G+ 19" LCD 8ms DVI Creative Audigy2 ZS {4.42} BenQ DW1640 Logitech z-5300e 5.1 280W Legend: Driver versions: {} User settings: [] Voltage: V Wattage: W Temperature: C (Celsius) min/max

  Read the article

• 5 Steps to getting started with IronRuby

  - by Eric Nelson

  IronRuby is a Open Source implementation of the Ruby programming language for .NET, heavily relying on Microsoft's Dynamic Language Runtime. The project's #1 goal is to be a true Ruby implementation, meaning it runs existing Ruby code. Check out this summary of using the Ruby standard library and 3rd party libraries in IronRuby. IronRuby has tight integration with .NET, so any .NET types can be used from IronRuby and the IronRuby runtime can be embedded into any .NET application. These 5 steps should get you nicely up and running on IronRuby – OR … you could just watch a video session from the lead developer which took place earlier this month (March 2010 - 60mins). But the 5 steps will be quicker :-) Step 1 – Install IronRuby :-) You can install IronRuby automatically using an MSI or manually. For simplicity I would recommend the MSI install. TIP: As of the 25th of March IronRuby has not quite shipped. The download above is a Release Candidate (RC) which means it is still undergoing final testing by the team. You will need to uninstall this version (RC3) once the final release is available. The good news is that uninstalling IronRuby RC3 will work without a hitch as the MSI does relatively little. Step 2 – Install an IronRuby friendly editor You will need to Install an editor to work with IronRuby as there is no designer support for IronRuby inside Visual Studio. There are many editors to choose from but I would recommend you either went with: SciTE (Download the MSI): This is a lightweight text editor which is simple to get up and running. SciTE understands Ruby syntax and allows you to easily run IronRuby code within the editor with a small change to the config file. SharpDevelop 3.2 (Download the MSI): This is an open source development environment for C#, VB, Boo and now IronRuby. IronRuby support is new but it does include integrated debugging. You might also want to check out the main site for SharpDevelop. TIP: There are commercial tools for Ruby development which offer richer support such as intellisense.. They can be coerced into working with IronRuby. A good one to start with is RubyMine which needs some small changes to make it work with IronRuby. Step 3 – Run the IronRuby Tutorial Run through the IronRuby tutorial which is included in the IronRuby download. It covers off the basics of the Ruby languages and how IronRuby integrates with .NET. In a typical install it will end up at C:\Program Files\IronRuby 0.9.4.0\Samples\Tutorial. Which will give you the tutorial implemented in .NET and Ruby. TIP: You might also want to check out these two introductory posts Using IronRuby and .NET to produce the ‘Hello World of WPF’ and What's IronRuby, and how do I put it on Rails? Step 4 – Get some good books to read Get a great book on Ruby and IronRuby. There are several free ebooks on Ruby which will help you learn the language. The little book of Ruby is a good place to start. I would also recommend you purchase IronRuby Unleashed (Buy on Amazon UK | Buy on Amazon USA). You might also want to check out this mini-review. Other books are due out soon including IronRuby in Action. TIP: Also check out the official documentation for using .NET from IronRuby. Step 5 – Keep an eye on the team blogs Keep an eye on the IronRuby team blogs including Jimmy Schementi, Jim Deville and Tomas Matousek (full list) TIP: And keep a watch out for the final release of IronRuby – due anytime soon!

  Read the article

• TechEd 2010 Important Events

  If youll be attending TechEd in New Orleans in a couple of weeks, make sure the following are all on your calendar:   Party with Palermo TechEd 2010 Edition Sunday 6 June 2010 7:30-930pm Central Time RSVP and see who else is coming here.  The party takes place from 730pm to 930pm Central (Local) Time,  and includes a full meal, free swag, and prizes.  The event is being held at Jimmy Buffetts Margaritaville located at 1104 Decatur Street.   Developer Practices Session: DPR304 FAIL: Anti-Patterns and Worst Practices Monday 7 June 2010 4:30pm-545pm Central Time Room 276 Come to my session and hear about what NOT to do on your software project.  Hear my own and others war stories and lessons learned.  Youll laugh, youll cry, youll realize youre a much better developer than a lot of folks out there.  Heres the official description: Everybody likes to talk about best practices, tips, and tricks, but often it is by analyzing failures that we learn from our own and others' mistakes. In this session, Steve describes various anti-patterns and worst practices in software development that he has encountered in his own experience or learned about from other experts in the field, along with advice on recognizing and avoiding them. View DPR304 in TechEd Session Catalog >> Exhibition Hall Reception Monday 7 June 2010 545pm-9pm Immediately following my session, come meet the shows exhibitors, win prizes, and enjoy plenty of food and drink.  Always a good time.   Party: Geekfest Tuesday 8 June 8pm-11pm Central Time, Pat OBriens Lets face it, going to a technical conference is good for your career but its not a whole lot of fun. You need an outlet. You need to have fun. Cheap beer and lousy pizza (with a New Orleans twist) We are bringing back GeekFest! Join us at Pat OBriens for a night of gumbo, beer and hurricanes. There are limited invitations available, so what are you waiting for? If you are attending the TechEd 2010 conference and you are a developer, you are invited. To register pick up your "duck" ticket (and wristband) in the TechEd Technical Learning Center (TLC) at the Developer Tools & Languages (DEV) information desk. You must have wristband to get in. Tuesday, June 8th from 8pm 11pm Pat OBriens New Orleans 624 Bourbon Street New Orleans, LA 70130 Closing Party at Mardi Gras World Thursday 10 June 730pm-10pm Central Time Join us for the Closing Party and enjoy great food, beverages, and the excitement of New Orleans at Mardi Gras World. The colors, the lights, the music, the joie de vivreits all here.  Learn more >> Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• TechEd 2010 Important Events

  If youll be attending TechEd in New Orleans in a couple of weeks, make sure the following are all on your calendar:   Party with Palermo TechEd 2010 Edition Sunday 6 June 2010 7:30-930pm Central Time RSVP and see who else is coming here.  The party takes place from 730pm to 930pm Central (Local) Time,  and includes a full meal, free swag, and prizes.  The event is being held at Jimmy Buffetts Margaritaville located at 1104 Decatur Street.   Developer Practices Session: DPR304 FAIL: Anti-Patterns and Worst Practices Monday 7 June 2010 4:30pm-545pm Central Time Room 276 Come to my session and hear about what NOT to do on your software project.  Hear my own and others war stories and lessons learned.  Youll laugh, youll cry, youll realize youre a much better developer than a lot of folks out there.  Heres the official description: Everybody likes to talk about best practices, tips, and tricks, but often it is by analyzing failures that we learn from our own and others' mistakes. In this session, Steve describes various anti-patterns and worst practices in software development that he has encountered in his own experience or learned about from other experts in the field, along with advice on recognizing and avoiding them. View DPR304 in TechEd Session Catalog >> Exhibition Hall Reception Monday 7 June 2010 545pm-9pm Immediately following my session, come meet the shows exhibitors, win prizes, and enjoy plenty of food and drink.  Always a good time.   Party: Geekfest Tuesday 8 June 8pm-11pm Central Time, Pat OBriens Lets face it, going to a technical conference is good for your career but its not a whole lot of fun. You need an outlet. You need to have fun. Cheap beer and lousy pizza (with a New Orleans twist) We are bringing back GeekFest! Join us at Pat OBriens for a night of gumbo, beer and hurricanes. There are limited invitations available, so what are you waiting for? If you are attending the TechEd 2010 conference and you are a developer, you are invited. To register pick up your "duck" ticket (and wristband) in the TechEd Technical Learning Center (TLC) at the Developer Tools & Languages (DEV) information desk. You must have wristband to get in. Tuesday, June 8th from 8pm 11pm Pat OBriens New Orleans 624 Bourbon Street New Orleans, LA 70130 Closing Party at Mardi Gras World Thursday 10 June 730pm-10pm Central Time Join us for the Closing Party and enjoy great food, beverages, and the excitement of New Orleans at Mardi Gras World. The colors, the lights, the music, the joie de vivreits all here.  Learn more >> Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• add/remove items in a list

  - by Jam

  I'm trying to create a player who can add and remove items from their inventory. I have everything working, I just have 1 small problem. Every time it prints the inventory, 'None' also appears. I've been messing with it to try and remove that, but no matter what I do, 'None' always appears in the program! I know I'm just missing something simple, but I can't figure it out for the life of me. class Player(object): def __init__(self, name, max_items, items): self.name=name self.max_items=max_items self.items=items def inventory(self): for item in self.items: print item def take(self, new_item): if len(self.items)<self.max_items: self.items.append(new_item) else: print "You can't carry any more items!" def drop(self, old_item): if old_item in self.items: self.items.remove(old_item) else: print "You don't have that item." def main(): player=Player("Jimmy", 5, ['sword', 'shield', 'ax']) print "Max items:", player.max_items print "Inventory:", player.inventory() choice=None while choice!="0": print \ """ Inventory Man 0 - Quit 1 - Add an item to inventory 2 - Remove an item from inventory """ choice=raw_input("Choice: ") print if choice=="0": print "Good-bye." elif choice=="1": new_item=raw_input("What item would you like to add to your inventory?") player.take(new_item) print "Inventory:", player.inventory() elif choice=="2": old_item=raw_input("What item would you like to remove from your inventory?") player.drop(old_item) print "Inventory:", player.inventory() else: print "\nSorry, but", choice, "isn't a valid choice." main() raw_input("Press enter to exit.")

  Read the article

• Can I create template-based library objects in Dreamweaver CS5?

  - by Danjah

  At work we need two 'streams' of template. The first are general layout templates, like the ones already available in the MX through CS5 packages (except we'd have our own customised ones). The second are more granular objects, some of which are functional. In both cases, I don't want Jimmy to be able to wreak havoc inside anything other than the 'editable regions' which make up the templates. Now this is fine if I stick with the first scenario (layout templates) where there's simply a big chunk of editable region for good ole Jim to sprawl into, think of this as the 'body content' area. But I really do need these granular library (or snippet) objects to work in the same way. Unfortunately with my attempts so far they don't work as I'd have thought - perhaps for good reason? When I create a blank template and throw in my chunk of HTML (unobstrusive JS and external CSS use selectors in this HTML to provide style and function) and save it as a new library item or snippet, all looks well. Then I create a new document based on a layout template and save it as a plain html file (still all good so far). Next I drop in my custom library item... still all good... but then I go to save the document and it only allows me to save it as a new template! I expected it would just allow me to save it as HTML and have it simply respect the defined editable regions, as happens in the containing page 'body content' editable region. Apologies if that got specific and technical quite quickly, but it is quite particular. If you want some example files lemme know and I'll zip some up. Many thanks :) p.s It is not a requirement that library objects must somehow inject their dependency files into the newly created page - I already know what they'll be. Also, I know I must 'detatch from original' once I drop a library item into a document which then allows customisation of the library object.

  Read the article

• DDD: Persisting aggregates

  - by Mosh

  Hello, Let's consider the typical Order and OrderItem example. Assuming that OrderItem is part of the Order Aggregate, it an only be added via Order. So, to add a new OrderItem to an Order, we have to load the entire Aggregate via Repository, add a new item to the Order object and persist the entire Aggregate again. This seems to have a lot of overhead. What if our Order has 10 OrderItems? This way, just to add a new OrderItem, not only do we have to read 10 OrderItems, but we should also re-insert all these 10 OrderItems again. (This is the approach that Jimmy Nillson has taken in his DDD book. Everytime he wants to persists an Aggregate, he clears all the child objects, and then re-inserts them again. This can cause other issues as the ID of the children are changed everytime because of the IDENTITY column in database.) I know some people may suggest to apply Unit of Work pattern at the Aggregate Root so it keeps track of what has been changed and only commit those changes. But this violates Persistence Ignorance (PI) principle because persistence logic is leaking into the Domain Model. Has anyone thought about this before? Mosh

  Read the article

• adding multiple <asp:Hyperlink>s into a repeater

  - by Colin Pickard

  I have a repeater control, and I want to put an unknown number of <asp:Hyperlink>s into the template, for example if you start with this: <asp:Repeater runat="server" ID="PetsRepeater"> <ItemTemplate> <%#DataBinder.Eval(Container.DataItem, "Owner")%> <%#this.ListPets(Container.DataItem)%> </ItemTemplate> </asp:Repeater> and in code behind: public partial class test1 : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { if (!Page.IsPostBack) { PetOwner p = new PetOwner() { Owner = "Jimmy", PetNames = new List<String>() { "Nemo", "Dory" } }; List<PetOwner> PetOwners = new List<PetOwner>() { p }; PetsRepeater.DataSource = PetOwners; PetsRepeater.DataBind(); } } protected String ListPets(Object PetOwner) { StringBuilder sb = new StringBuilder(); foreach (String Name in ((PetOwner)PetOwner).PetNames) { if (sb.Length > 0) sb.Append(", "); sb.Append(Name); } return sb.ToString(); } } class PetOwner { public String Owner; public List<String> PetNames; } Now suppose instead of having the string "Nemo, Dory" in my repeater, I want something like this: <asp:HyperLink runat=server Text="Nemo" NavigateUrl="Pet.aspx?Name=Nemo" />, <asp:HyperLink runat=server Text="Dory" NavigateUrl="Pet.aspx?Name=Dory" /> How can I do that? I tried putting a foreach inline in the aspx page, but I get the error Invalid expression term 'foreach'.

  Read the article

• sorting names in a linked list

  - by sil3nt

  Hi there, I'm trying to sort names into alphabetical order inside a linked list but am getting a run time error. what have I done wrong here? #include <iostream> #include <string> using namespace std; struct node{ string name; node *next; }; node *A; void addnode(node *&listpointer,string newname){ node *temp; temp = new node; if (listpointer == NULL){ temp->name = newname; temp->next = listpointer; listpointer = temp; }else{ node *add; add = new node; while (true){ if(listpointer->name > newname){ add->name = newname; add->next = listpointer->next; break; } listpointer = listpointer->next; } } } int main(){ A = NULL; string name1 = "bob"; string name2 = "tod"; string name3 = "thomas"; string name4 = "kate"; string name5 = "alex"; string name6 = "jimmy"; addnode(A,name1); addnode(A,name2); addnode(A,name3); addnode(A,name4); addnode(A,name5); addnode(A,name6); while(true){ if(A == NULL){break;} cout<< "name is: " << A->name << endl; A = A->next; } return 0; }

  Read the article

• Passing array values in an HTTP request in .NET

  - by Zarjay

  What's the standard way of passing and processing an array in an HTTP request in .NET? I have a solution, but I don't know if it's the best approach. Here's my solution: <form action="myhandler.ashx" method="post"> <input type="checkbox" name="user" value="Aaron" /> <input type="checkbox" name="user" value="Bobby" /> <input type="checkbox" name="user" value="Jimmy" /> <input type="checkbox" name="user" value="Kelly" /> <input type="checkbox" name="user" value="Simon" /> <input type="checkbox" name="user" value="TJ" /> <input type="submit" value="Submit" /> </form> The ASHX handler receives the "user" parameter as a comma-delimited string. You can get the values easily by splitting the string: public void ProcessRequest(HttpContext context) { string[] users = context.Request.Form["user"].Split(','); } So, I already have an answer to my problem: assign multiple values to the same parameter name, assume the ASHX handler receives it as a comma-delimited string, and split the string. My question is whether or not this is how it's typically done in .NET. What's the standard practice for this? Is there a simpler way to grab the multiple values than assuming that the value is comma-delimited and calling Split() on it? Is this how arrays are typically passed in .NET, or is XML used instead? Does anyone have any insight on whether or not this is the best approach?

  Read the article

• Autoloading Development or Production configs (best practices)

  - by Xeoncross

  When programming sites you usually have one set of config files for the development environment and another set for the production server (or one file with both settings). I am assuming all projects should be handled by version control like git or svn. Manual file transfers (like FTP) is wrong on so many levels. How you enable/disable the correct settings (so that your system knows which ones to use) is a problem for me. Each system I work on just kind of jimmy-rigs a solution. Below are the 3 methods I know of and I am hoping that someone can submit a more elegant solutions. 1) File Based The system loads a folder structure based on the URL requested. /site.com /site.fakeTLD /lib index.php For example, if the url is http://site.com then the system loads the production config files located in the site.com folder. However, if I'm working on the site locally I visit http://site.fakeTLD to work on the local copy of the site. To setup this I edit my hosts file and add site.fakeTLD to point to my own computer (127.0.0.1/localhost) and then create a vhost in apache. So now I can work on the codebase locally and then push to the server without any trouble. The problem is that this is susceptible to a "host" injection attack. So someone loading site.com could set the host to site.fakeTLD and then the system would load my development config files instead of production. 2) Config Based The config files contain on section for development - and one for production. The problem is that each time you go to push your changes to the repo you have to edit the file to specify which set of config options should be used. $use = 'production'; //'development'; This leaves the repo open to human error should one of the developers forget to enable the right setting. 3) File System Check Based All the development machines have an extra empty file called "development.txt" or something. Each time the system loads it checks for this file - if found then it knows it is in development mode - if missing then it knows it is in production mode. Since the file is NEVER ADDED to the repo then it will never be pushed (and checked out) on the production machine. However, this just doesn't feel right and causes a slight slow down since all filesystem checks are slow.

  Read the article

• How to get an inactive RAID device working again?

  - by Jonik

  After booting, my RAID1 device (/dev/md_d0 *) sometimes goes in some funny state and I cannot mount it. * Originally I created /dev/md0 but it has somehow changed itself into /dev/md_d0. # mount /opt mount: wrong fs type, bad option, bad superblock on /dev/md_d0, missing codepage or helper program, or other error (could this be the IDE device where you in fact use ide-scsi so that sr0 or sda or so is needed?) In some cases useful info is found in syslog - try dmesg | tail or so The RAID device appears to be inactive somehow: # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md_d0 : inactive sda4[0](S) 241095104 blocks # mdadm --detail /dev/md_d0 mdadm: md device /dev/md_d0 does not appear to be active. Question is, how to make the device active again (using mdmadm, I presume)? (Other times it's alright (active) after boot, and I can mount it manually without problems. But it still won't mount automatically even though I have it in /etc/fstab: /dev/md_d0 /opt ext4 defaults 0 0 So a bonus question: what should I do to make the RAID device automatically mount at /opt at boot time?) This is an Ubuntu 9.10 workstation. Background info about my RAID setup in this question. Edit: My /etc/mdadm/mdadm.conf looks like this. I've never touched this file, at least by hand. # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR <my mail address> # definitions of existing MD arrays # This file was auto-generated on Wed, 27 Jan 2010 17:14:36 +0200 In /proc/partitions the last entry is md_d0 at least now, after reboot, when the device happens to be active again. (I'm not sure if it would be the same when it's inactive.) Resolution: as Jimmy Hedman suggested, I took the output of mdadm --examine --scan: ARRAY /dev/md0 level=raid1 num-devices=2 UUID=de8fbd92[...] and added it in /etc/mdadm/mdadm.conf, which seems to have fixed the main problem. After changing /etc/fstab to use /dev/md0 again (instead of /dev/md_d0), the RAID device also gets automatically mounted!

  Read the article

• SQL 2005 Transaction Rollback Hung–unresolved deadlock

  - by steveh99999

  Encountered an interesting issue recently with a SQL 2005 sp3 Enterprise Edition system. Every weekend, a full database reindex was being run on this system – normally this took around one and a half hours. Then, one weekend, the job ran for over 17 hours  - and had yet to complete... At this point, DBA cancelled the job. Job status is now cancelled – issue over…   However, cancelling the job had not killed the reindex transaction – DBCC OPENTRAN was still showing the transaction being open. The oldest open transaction in the database was now over 17 hours old.  Consequently, transaction log % used growing dramatically and locks still being held in the database... Further attempts to kill the transaction did nothing. ie we had a transaction which could not be killed. In sysprocesses, it was apparent the SPID was in rollback status, but the spid was not accumulating CPU or IO. Was the SPID stuck ? On examination of the SQL errorlog – shortly after the reindex had started, a whole bunch of deadlock output had been produced by trace flag 1222. Then this :- spid5s      ***Stack Dump being sent to   xxxxxxx\SQLDump0042.txt spid5s      * ******************************************************************************* spid5s      * spid5s      * BEGIN STACK DUMP: spid5s      *   12/05/10 01:04:47 spid 5 spid5s      * spid5s      * Unresolved deadlock spid5s      * spid5s      *   spid5s      * ******************************************************************************* spid5s      * ------------------------------------------------------------------------------- spid5s      * Short Stack Dump spid5s      Stack Signature for the dump is 0x000001D7 spid5s      External dump process return code 0x20000001. Unresolved deadlock – don’t think I’ve ever seen one of these before…. A quick call to Microsoft support confirmed the following bug had been hit :- http://support.microsoft.com/kb/961479 So, only option to get rid of the hung spid – to restart SQL Server… Fortunately SQL Server restarted without any issues. I was pleasantly surprised to see that recovery on this particular database was fast. However, restarting SQL Server to fix an issue is not something I would normally rush to do... Short term fix – the reindex was changed to use MAXDOP of 1. Longer term fix will be to apply the correct CU, or wait for SQL 2005 sp 4 ?? This should be released any day soon I hope..

  Read the article

• Spotlight on an office – Utrecht

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} This time in our monthly topic, we have our spotlight on the brand new Oracle office in Utrecht, the Netherlands. About 35km south-east of Schiphol Airport and centrally located in the Netherlands, Oracle moved into the Facet building in March 2011. Facet is much more than an office building, it creates a work environment that relates to the ‘No Limits’ philosophy Oracle has in the Netherlands. “No Limits” means the building belongs to everyone. You choose the best place to work, based on the activities of that moment. To point this out, we currently have 1050 people working for Oracle Netherlands, and 623 workplaces. There is virtually no limit to where you can sit in our shiny new offices; we no longer have 'zoning', where departments own specific areas in the building, Even the Managing Director of Oracle Netherlands, does not have an office and he chooses a different working place every day. So make sure you are prepared when he is sitting next to you one day! If nobody has a fixed workplace, then you would think that finding a colleague could be tricky. Oracle uses CU (‘SeeYou’) which makes all of us easier to locate. Upon entering the building you receive a text stating where the greatest concentration of your buddies is sitting. Our internal messaging service also proves to be very valuable finding your colleagues. The heart of our building is the great RestOrant, with a very busy coffee bar. It offers an informal place for people to meet and is busy all day, not just at lunch time! The O-Bar in the atrium on the ground floor is also a very popular place to meet and drink tea or coffee and gives a breathtaking introduction to the office to any of our first time visitors. For a few minutes of relaxation during the working day, there are table tennis facilities and a Wii room on every floor! So if you are interested in joining Oracle in this Netherlands or anywhere else in EMEA, please have a look at http://campus.oracle.com for all of our latest vacancies and internships.

  Read the article

• powershell / runspace in a thread

  - by Vincent

  Hello ! I'm running the following code : RunspaceConfiguration config = RunspaceConfiguration.Create(); PSSnapInException warning; config.AddPSSnapIn("Microsoft.Exchange.Management.PowerShell.Admin", out warning); if (warning != null) throw warning; Runspace thisRunspace = RunspaceFactory.CreateRunspace(config); thisRunspace.Open(); string alias = usr.AD.CN.Replace(' ', '.'); string letter = usr.AD.CN.Substring(0, 1); string email = alias + "@" + (!usr.Mdph ? Constantes.AD_DOMAIN : Constantes.MDPH_DOMAIN) + "." + Constantes.AD_LANG; string db = "CN=IS-" + letter + ",CN=SG-" + letter + ",CN=InformationStore,CN=" + ((char)letter.ToCharArray()[0] < 'K' ? Constantes.EXC_SRVC : Constantes.EXC_SRVD) + Constantes.EXC_DBMEL; string cmd = "Enable-Mailbox -Identity \"" + usr.AD.CN + "\" -Alias " + alias + " -PrimarySmtpAddress " + email + " -DisplayName \"" + usr.AD.CN + "\" -Database \"" + db + "\""; Pipeline thisPipeline = thisRunspace.CreatePipeline(cmd); thisPipeline.Invoke(); The code is running in a thread created that way : t.WorkThread = new Thread(cu.CreerUser); t.WorkThread.Start(); If I run the code directly (not through a thread), it's working. When in a thread it throws the following exception : ObjectDisposedException "The safe handle has been closed." (Translated from french) I then replaced "Open" wirh "OpenAsync" which helped not getting the previous exception. But when on Invoke I get the following exception : InvalidRunspaceStateException "Unable to call the pipeline because its state of execution is not Opened. Its current state is Opening." (Also translated from french) I'm clueless... Any help welcome !!! Thanks !!!

  Read the article

• Crawler do not create custom crawled properties

  - by user173739

  These days i have faced with very strange problem. I have development environment with MOSS 2007 SP 2 and WS 2008, i have search configured and everything works great. I have started to configuring staging environment (MOSS 2007 SP2 with June CU) and create new farm and new SSP. I have deployed my changes with package (wsp) and manually create site collections, sub webs, pages and so on. When fill crawl finishes, i see in Crawl log that all my pages have been successfully crawled and when i use some test tools to query search, my pages have been found. In crawl log there is few errors like http://mysite/sites/de/pages "The crawler could not communicate with the server. Check that the server is available and that the firewall access is configured correctly..", but all pages in this Page library were indexed. The problem is that i use custom managed properties (mapped to custom crawled properties) in search queries, but crawler didn't create crawled properties for all my new site columns. For example for site column IsAccent the crawler didn't create cralwed property ows_isAccesnt. I'm sure that i have created pages for specific content type and all my crawl categories have checked "Automatically discover new properties when a crawl takes place ". In site settings - Searchable columns i haven't got any column selected as Nocrowl. I tried to export my managed and crawled properties from dev environment to stage evironment but all my managed properties were empty, after that i recreated SSP...the result was the same... I checked specific page with tools like Sharepoint Manager 2007 and U2U Caml Query Builder 2007 that content type is correct, and i can see values of my custom site collumns.... Using U2U Caml Query Builder 2007 agains some Page library in Result tab i can see ows_IsAccent (my site collumn is IsAccent) and others site columns, but i can't find them in Crawled properties. Any idias?

  Read the article

• LaTeX book class: Twosided document with wrong margins

  - by fgysin

  I am trying to write my thesis in latex... Cannot get the layout straight though :? I'm using the following document class: \documentclass[11pt,a4paper,twoside,openright]{book} My problem is: on the odd numbered pages there is a big margin right, and a small margin left - it should be the other way round... (for binding & stuff) I am a little puzzled by this - am I just to stupid to see the obvious? The odd page numbers appear on the 'right' page of a bound document, so there needs to be a larger margin left for bindin. Right? Why does LaTeX not behave like this? Here is the full code to produce a small Tex file that shows my problem: \documentclass[11pt,a4paper,twoside,openright]{book} \begin{document} \chapter{blah} Lorem ipsum ius et accumsan tractatos, aliquip deterruisset cu usu. Ea soleat eirmod nostrud eum, est ceteros similique ad, at mea tempor petentium. At decore neglegentur quo, ea ius doming dictas facilis, duo ut porro nostrum suavitate. \end{document}

  Read the article

• Trouble using latex in Matplotlib / Scipy etc.

  - by ajhall

  I'm having some issues with my first attempts at using matplotlib and scipy to make some scatter plots of my data (too many variables, trying to see many things at once). Here's some code of mine that is working fairly well... import numpy from scipy import * import pylab from matplotlib import * import h5py FileID = h5py.File('3DiPVDplot1.mat','r') # (to view the contents of: list(FileID) ) group = FileID['/'] CurrentsArray = group['Currents'].value IvIIIarray = group['IvIII'].value PFarray = group['PF'].value growthTarray = group['growthT'].value fig = pylab.figure() ax = fig.add_subplot(111) cax = ax.scatter(IvIIIarray, growthTarray, PFarray, CurrentsArray, alpha=0.75) cbar = fig.colorbar(cax) ax.set_xlabel('Cu / III') ax.set_ylabel('Growth T') ax.grid(True) pylab.show() I tried to change the code to include latex fonts and interpreting, none of it seems to work for me, however. Here's an example attempt that didn't work: import numpy from scipy import * import pylab from matplotlib import * import h5py rc('text', usetex=True) rc('font', family='serif') FileID = h5py.File('3DiPVDplot1.mat','r') # (to view the contents of: list(FileID) ) group = FileID['/'] CurrentsArray = group['Currents'].value IvIIIarray = group['IvIII'].value PFarray = group['PF'].value growthTarray = group['growthT'].value fig = pylab.figure() ax = fig.add_subplot(111) cax = ax.scatter(IvIIIarray, growthTarray, PFarray, CurrentsArray, alpha=0.75) cbar = fig.colorbar(cax) ax.set_xlabel(r'Cu / III') ax.set_ylabel(r'Growth T') ax.grid(True) pylab.show() I'm using fink installed python26 with corresponding packages for scipy matplotlib etc. I've been using iPython and manual work instead of scripts in python. Since I'm completely new to python and scipy, I'm sure I'm making some stupid simple mistakes. Please enlighten me! I greatly appreciate the help!

  Read the article

• malloc works, cudaHostAlloc segfaults?

  - by Mikhail

  I am new to CUDA and I want to use cudaHostAlloc. I was able to isolate my problem to this following code. Using malloc for host allocation works, using cudaHostAlloc results in a segfault, possibly because the area allocated is invalid? When I dump the pointer in both cases it is not null, so cudaHostAlloc returns something... works in_h = (int*) malloc(length*sizeof(int)); //works for (int i = 0;i<length;i++) in_h[i]=2; doesn't work cudaHostAlloc((void**)&in_h,length*sizeof(int),cudaHostAllocDefault); for (int i = 0;i<length;i++) in_h[i]=2; //segfaults Standalone Code #include <stdio.h> void checkDevice() { cudaDeviceProp info; int deviceName; cudaGetDevice(&deviceName); cudaGetDeviceProperties(&info,deviceName); if (!info.deviceOverlap) { printf("Compute device can't use streams and should be discared."); exit(EXIT_FAILURE); } } int main() { checkDevice(); int *in_h; const int length = 10000; cudaHostAlloc((void**)&in_h,length*sizeof(int),cudaHostAllocDefault); printf("segfault comming %d\n",in_h); for (int i = 0;i<length;i++) { in_h[i]=2; } free(in_h); return EXIT_SUCCESS; } ~ Invocation [id129]$ nvcc fun.cu [id129]$ ./a.out segfault comming 327641824 Segmentation fault (core dumped) Details Program is run in interactive mode on a cluster. I was told that an invocation of the program from the compute node pushes it to the cluster. Have not had any trouble with other home made toy cuda codes.

  Read the article

• Data is not saved in MS Access database

  - by qwerty

  Hello, I have a visual C# project and i'm trying to insert data in a MS Access Database when i press a button. Here is the code: private void button1_Click(object sender, EventArgs e) { try { OleDbDataAdapter adapter=new OleDbDataAdapter(); adapter.InsertCommand = new OleDbCommand(); adapter.InsertCommand.CommandText = "insert into Candidati values ('" + maskedTextBox1.Text.Trim() + "','" + textBox1.Text.Trim() + "', '" + textBox2.Text.Trim() + "', '" + textBox3.Text.Trim() + "','" + Convert.ToDouble(maskedTextBox2.Text) + "','" + Convert.ToDouble(maskedTextBox3.Text) + "')"; con.Open(); adapter.InsertCommand.Connection = con; adapter.InsertCommand.ExecuteNonQuery(); con.Close(); MessageBox.Show("Inregistrare adaugata cu succes!"); maskedTextBox1.Text = null; maskedTextBox2.Text = null; maskedTextBox3.Text = null; textBox1.Text = null; textBox2.Text = null; textBox3.Text = null; maskedTextBox1.Focus(); } catch (AdmitereException exc) { MessageBox.Show("A aparut o exceptie: "+exc.Message, "Eroare!", MessageBoxButtons.OK, MessageBoxIcon.Error); } } The connection string is: private static string connectionString; OleDbConnection con; public AddCandidati() { connectionString = "Provider=Microsoft.JET.OLEDB.4.0;Data Source=Admitere.mdb"; con = new OleDbConnection(connectionString); InitializeComponent(); } Where AddCandidati is the form. The data is not saved in the database, why? I have the .mdb file in the project folder.. What i'm doing wrong? I did not got any exception when i press the button.. Thanks!

  Read the article

• how to make Regular expression into non-greedy ?

  - by Rueta

  Hi everyone! I have made a Work with JQ. My Work is a string width a special character block begin and end of string. I want take the text in that special characters, i used regular expression for find in string, but how to make JQ find multi result when have two special character or more. My html here; <div id="container"> <div id="textcontainer"> Cu?c chi?n pháp lý gi?a [|co th?|nghi?m|] th? tru?ng [|test2|dây là test l?n 2|] ch?ng khoán [|M?|day la nuoc my|] và ngân hàng d?u tu quy?n l?c nh?t Ph? Wall m?i ch? b?t d?u. </div> </div> and my JQ $(document).ready(function() { var takedata = $("#textcontainer").text(); var test = 'abcd adddb'; var filterdata = takedata.match(/(\[.+\])/); alert(filterdata); //end write js }); my result is: [|co th?|nghi?m|] th? tru?ng [|test2|dây là test l?n 2|] ch?ng khoán [|M?|day la nuoc my|] . but this is'nt the result i want :(. How to get [text] for times 1 and [demo] for times 2 ?. pls help me !. thankyou :)

  Read the article

• How to send XML and other post parameters via cURL in PHP

  - by tomaszs

  Hello. I've used code below to send XML to my REST API. $xml_string_data contains proper XML, and it is passed well to mypi.php: //set POST variables $url = 'http://www.server.cu/mypi.php'; $fields = array( 'data'=>urlencode($xml_string_data) ); //url-ify the data for the POST $fields_string = ""; foreach($fields as $key=>$value) { $fields_string .= $key.'='.$value.'&'; } rtrim($fields_string,'&'); echo $fields_string; //open connection $ch = curl_init(); curl_setopt($ch,CURLOPT_URL,$url); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch,CURLOPT_POST,count($fields)); curl_setopt($ch,CURLOPT_POSTFIELDS,$fields_string); curl_setopt($ch,CURLOPT_HTTPHEADER,array ( "Expect: " )); //execute post $result = @curl_exec($ch); But when I've added other field: $fields = array( 'method' => "methodGoPay", 'data'=>urlencode($xml_string_data) ); It stopped to work. On the mypi.php I don't recieve any more POST parameters at all! Could you you please tell me what to do to send XML and other post parameters in one cURL request? Please don't suggest using any libraries, I wan't to acomplish it in plain PHP.

  Read the article

• ASP.NET Repeater - Evaluate Item as int?

  - by WedTM

  I'm trying to style a table row based upon a value in the databound collection (from LINQ to SQL) in my item template, however it's not working. This is what I have so far: <ItemTemplate> <% string style = String.Empty; if ((string)DataBinder.Eval(Quotes.Cu, "Status") == "Rejected") style = "color:red;"; else if ((string)Eval("Priority") == "Y") style = "color:green;"; if (style == String.Empty) Response.Write("<tr>"); else Response.Write("<tr style=\"" + style + "\""); %> <td> <%# Eval("QuoteID") %> </td> <td> <%# Eval("DateDue", "{0:dd/MM/yyyy}") %> </td> <td> <%# Eval("Company") %> </td> <td> <%# Eval("Estimator") %> </td> <td> <%# Eval("Attachments") %> </td> <td> <%# Eval("Employee") %> </td> </tr> </ItemTemplate>

  Read the article

• Beginner error in CUDA

  - by Dimitri

  Hi folks, first all i want to wish you a merry christmas. I am writing a small program in CUDA and i have the following errors : contraste.cu(167): error: calling a host function from a __device__/__global__ function is not allowed I don't understand why. Can you please help me and show me my errors. It seems that my program is correct. Here is a the bunch of code causing the problems : __global__ void kernel_contraste(float power, unsigned char tab_in[], unsigned char tab_out[], int nbl, int nbc) { int x = threadIdx.x; printf("I am the thread %d\n", x); } Part of my main program : unsigned char *dimg, *dimg_res; ..... cudaMalloc((void **)dimg, h * w * sizeof(char)); cudaMemcpy(dimg, r.data, h*w*sizeof(char), cudaMemcpyHostToDevice); cudaMalloc((void **)dimg_res, h*w*sizeof(char)); dim3 nbThreadparBloc(256); dim3 numblocs(1); kernel_contraste<<<numblocs, nbThreadparBloc >>>(puissance, dimg, dimg_res, h, w); cudaThreadSynchronize(); ..... cudaFree(dimg); cudaFree(dimg_res); The line 167 is the line where i call the printf in function kernel_contraste. For information, this program takes an image as an input( a sun Rasterfile ) and a power then it calculates the contraste of that image. Thanks !!

  Read the article

• Last week I was presented with a Microsoft MVP award in Virtual Machines – time to thank all who hel

  - by Liam Westley

  MVP in Virtual Machines Last week, on 1st April, I received an e-mail from Microsoft letting me know that I had been presented with a 2010 Microsoft® MVP Award for outstanding contributions in Virtual Machine technical communities during the past year.   It was an honour to be nominated, and is a great reflection on the vibrancy of the UK user group community which made this possible. Virtualisation for developers, not just IT Pros I consider it a special honour as my expertise in virtualisation is as a software developer utilising virtual machines to aid my software development, rather than an IT Pro who manages data centre and network infrastructure.  I’ve been on a minor mission over the past few years to enthuse developers in a topic usually seen as only for network admins, but which can make their life a whole lot easier once understood properly. Continuous learning is fun In 1676, the scientist Isaac Newton, in a letter to Robert Hooke used the phrase (http://www.phrases.org.uk/meanings/268025.html) ‘If I have seen a little further it is by standing on the shoulders of Giants’ I’m a nuclear physicist by education, so I am more than comfortable that any knowledge I have is based on the work of others.  Although far from a science, software development and IT is equally built upon the work of others. It’s one of the reasons I despise software patents. So in that sense this MVP award is a result of all the great minds that have provided virtualisation solutions for me to talk about.  I hope that I have always acknowledged those whose work I have used when blogging or giving presentations, and that I have executed my responsibility to share any knowledge gained as widely as possible. Thanks to all those who helped – a big thanks to the UK user group community I reckon this journey started in 2003 when I started attending a user group called the London .Net Users Group (http://www.dnug.org.uk) started by a nice chap called Ian Cooper. The great thing about Ian was that he always encouraged non professional speakers to take the stage at the user group, and my first ever presentation was on 30th September 2003; SQL Server CE 2.0 and the.NET Compact Framework. In 2005 Ian Cooper was on the committee for the first DeveloperDeveloperDeveloper! day, the free community conference held at Microsoft’s UK HQ in Thames Valley park in Reading.  He encouraged me to take part and so on 14th May 2005 I presented a talk previously given to the London .Net User Group on Simplifying access to multiple DB providers in .NET.  From that point on I definitely had the bug; presenting at DDD2, DDD3, groking at DDD4 and SQLBits I and after a break, DDD7, DDD Scotland and DDD8.  What definitely made me keen was the encouragement and infectious enthusiasm of some of the other DDD organisers; Craig Murphy, Barry Dorrans, Phil Winstanley and Colin Mackay. During the first few DDD events I met the Dave McMahon and Richard Costall from NxtGenUG who made it easy to start presenting at their user groups.  Along the way I’ve met a load of great user group organisers; Guy Smith-Ferrier of the .Net Developer Network, Jimmy Skowronski of GL.Net and the double act of Ray Booysen and Gavin Osborn behind what was Vista Squad and is now Edge UG. Final thanks to those who suggested virtualisation as a topic ... Final thanks have to go the people who inspired me to create my Virtualisation for Developers talk.  Toby Henderson (@holytshirt) ensured I took notice of Sun’s VirtualBox, Peter Ibbotson for being a fine sounding board at the Kew Railway over quite a few Adnam’s Broadside and to Guy Smith-Ferrier for allowing his user group to be the guinea pigs for the talk before it was seen at DDD7.  Thanks to all of you I now know much more about virtualisation than I would have thought possible and it continues to be great fun. Conclusion If this was an academy award acceptance speech I would have been cut off after the first few paragraphs, so well done if you made it this far.  I’ll be doing my best to do justice to the MVP award and the UK community.  I’m fortunate in having a new employer who considers presenting at user groups as a good thing, so don’t expect me to stop any time soon. If you’ve never seen me in action, then you can view the original DDD7 Virtualisation for Developers presentation (filmed by the Microsoft Channel 9 team) as part of the full DDD7 video list here, http://www.craigmurphy.com/blog/?p=1591.  Also thanks to Craig Murphy’s fine video work you can also view my latest DDD8 presentation on Commercial Software Development, here, http://vimeo.com/9216563 P.S. If I’ve missed anyone out, do feel free to lambast me in comments, it’s your duty.

  Read the article

< Previous Page | 7 8 9 10 11 12  | Next Page >