Search Results

Search found 356 results on 15 pages for 'datacenter'.

Page 11/15 | < Previous Page | 7 8 9 10 11 12 13 14 15  | Next Page >

  • New whitepaper: Evolution from the Traditional Data Center to Exalogic: An Operational Perspective

    - by Javier Puerta
    IT organizations are struggling with the need to balance the day-to-day concerns of data center management against the business level requirements to deliver long-term value. This balancing act has proven difficult and inefficient: systems and application management tools are resource intensive and traditional infrastructure management architectures have developed over time on a project by project basis. These traditional management systems consist of multiple tools that require administrators to waste time performing too many steps to handle routine administrative tasks. Operational efficiency and agility in your enterprise are directly linked to the capabilities provided by the management layer across the entire stack, from the application, middleware, operating system, compute, network and storage. Only when this end to end capability is provided will we experience the full benefit of a scalable, efficient, responsive and secure datacenter. Managing Exalogic is substantially less complex and error prone than managing traditional systems built from individually sourced, multi-vendor components because Exalogic is designed to be administered and maintained as a single, integrated system (Figure 1). It is at the forefront of the industry-wide shift away from costly and inferior one-off platforms toward private clouds and Engineered Systems. Read the full whitepaper "Evolution from the Traditional Data Center to Exalogic: An Operational Perspective". Full document is available for download at the Exadata Partner Community Collaborative Workspace (for community members only - if you get an error message, please register for the Community first).

    Read the article

  • New Whitepaper: Evolution from the Traditional Data Center to Exalogic: An Operational Perspective

    - by Javier Puerta
    IT organizations are struggling with the need to balance the day-to-day concerns of data center management against the business level requirements to deliver long-term value. This balancing act has proven difficult and inefficient: systems and application management tools are resource intensive and traditional infrastructure management architectures have developed over time on a project by project basis. These traditional management systems consist of multiple tools that require administrators to waste time performing too many steps to handle routine administrative tasks. Operational efficiency and agility in your enterprise are directly linked to the capabilities provided by the management layer across the entire stack, from the application, middleware, operating system, compute, network and storage. Only when this end to end capability is provided will we experience the full benefit of a scalable, efficient, responsive and secure datacenter. Managing Exalogic is substantially less complex and error prone than managing traditional systems built from individually sourced, multi-vendor components because Exalogic is designed to be administered and maintained as a single, integrated system (Figure 1). It is at the forefront of the industry-wide shift away from costly and inferior one-off platforms toward private clouds and Engineered Systems. Read the full whitepaper "Evolution from the Traditional Data Center to Exalogic: An Operational Perspective". Full document is available for download at the Exadata Partner Community Collaborative Workspace (for community members only - if you get an error message, please register for the Community first).

    Read the article

  • Oracle Virtual Desktop Infrastructure

    - by Fat Bloke
    A lot of the recent blog entries here have been about Oracle VM VirtualBox, possibly the coolest personal desktop virtualization product known to man. Deploying VirtualBox on your PC or Mac lets you run many virtual desktops at the same time to one user, you. But did you know that VirtualBox can also power an Enterprise-scale virtual desktop deployment too, delivering many desktops to many users?  As part of another Oracle product, Oracle Virtual Desktop Infrastructure (VDI), VirtualBox can run your Windows, Linux or Solaris desktops on servers located in the datacenter. Oracle VDI orchestrates the whole deal by looking after : creating or cloning the virtual desktops from a master template; managing the lifecycle of the desktops (create, start, suspend, resume, stop, delete); assigning which users get which desktops;  delivering easy and fast access to these virtual desktops from almost any device, such as existing PCs or Macs, iPads, or specially designed Sun Ray client devices too; load balancing and session management of all of this.  Architecturally the solution looks something like this: This is an increasingly hot area of the IT landscape, so the Fat Bloke has decided to create a new blog category (VDI) and dedicate a few blog entries to look into this in a bit more detail over the next few weeks. Watch this space... - FB 

    Read the article

  • Server Setups for Agencies [closed]

    - by styks1987
    We are considering consolidating our server administration by cutting down on the number of systems we currently use to manage all our websites(~65 websites). Currently we have a testing server and 3 production servers. (2 - cherokee(linode), 1 - apache (mt)) We don't have a dedicated server admin, so I am stuck with managing all these servers, and as a developer, I don't want to deal with all the server hassle. So my main goal is to cut down on the time spent messing with the servers. We have looked at Pagoda Box and AppFog as possibilities. I am not sure if Pagoda Box would be cost effective. With 65+ websites we may end up paying anywhere from 0 to $50+ per website per month. Right now we page about $250 per month for the 4 VPS servers mentioned above. We already use Capistrano for deployment. I have the opportunity to completely overhaul the entire setup and I would like some feedback on where you found your information for large scale server management or how you currently do it. Articles are welcome. In summary: What is new (past 2 years) in simple server management arena? If you work at an agency or have had agency experience, how do/did you manage your sites? a. What is the level of effort for SSL, new site setup, database management, and extension management. b. How did you handle datacenter outages. Anyone with Pagoda Box experience, do you like it and did you have problems with Wordpress, Cakephp, Drupal, Expression Engine or Magento? a. Is it expensive for you? b. How has server uptime been? Your direction and comments are greatly appreciated.

    Read the article

  • Installing via Windows Server 2008 Remote Desktop

    - by Martin Pronk
    I’m trying to install Visual Studio 2008 Team Test Load Agent on a server with Windows 2008 Datacenter edition SP2 via remote desktop. After the installation program have restarted the server and tries to continue the installation, I get a command prompt with the following error: C:\Windows\system32>change user /INSTALL Install mode does not apply to a Terminal server configured for remote administration. C:\Windows\system32>"C:\Users\ADMINI~1\AppData\Local\Temp\setup.exe" /TempCopy How do I install programs via Remote Desktop if I’m not allowed to use “change user /INSTALL”? PS: This is a onetime installation.

    Read the article

  • Can we you the attached properties in C# class library?

    - by Manas Agarwal
    Hi I have implemented the Observer Pattern with lazy load. The class that requests the data from the database is a singleton class. Now I am able to load the data from one database (located in one datacenter) very easily. But I need to get the data from other data centers too and display on the same UI. I can somehow pass the address of second data center and fetch the data from there also. But once I will get the data from second data center, it will be added to earlier list only. So later it will be thought for me to distinguish between the data. So I thought of attaching a property with the result set, so that while displaying the output I can show the data for both the data centers separately but on the same UI. I thought of attached property as an option where I can attach the data center name with the list of the data obtained. How is it possible to do in C#? Thanks Manas

    Read the article

  • Azure flexibility in geolocation and specs

    - by bitbitbit
    Hi, I'm reading about Azure and there are a couple of things I don't understand: If I choose put a server on Europe, why can't I move it to another datacenter afterwards? If I choose a size for a worker/web role, could I upgrade it to a bigger one afterwards? I think I've read that I cannot put different instances of a worker/web role with different sizes working together? Am I right? And in affirmative case, why? What is cheaper? a big VM with a nicely multithreaded worker role or multiple single-threaded worker roles in several small VMs? Thanks in advance.

    Read the article

  • Cloud Apps and Single Sign-On (AD integration)

    - by Pablo Alvim
    I've been investigating some cloud vendors and the ability to implement single sign-on with them, especially when it comes to AD (Active Directory) integration. So far I've learned that with Azure this is possible through ADFS and the AppFabric Access Control offer. In AWS, since it is possible to create a VPN and see EC2 instances as a natural extension of a private datacenter, I believe implementing SSO would be rather simple (not sure if I'm right on this one... Please correct me if I'm wrong). With App Engine though, even though there is some documentation on AD synchronization (not full integration) for Google Apps, I'm struggling to find out whether AD integration would be possible... Is there any strategy for that? Any bit of information on cloud apps and AD integration will be appreciated!

    Read the article

  • Querying Networking Statistics: dlstat(1M)

    - by user12612042
    Oracle Solaris 11 took another big leap forward in networking technologies providing a reliable, secure and scalable infrastructure to meet the growing needs of today's datacenter implementations. Oracle Solaris 11 introduced a new and powerful network stack architecture, also known as Project Crossbow. From Solaris 11 onwards, we introduced a command line tool viz. dlstat(1M) to query network statistics. dlstat (for datalink statistics) is a statistics querying counterpart for dladm(1M) - the datalink administration tool. The tool is very easy to get started. Just type dlstat on a shell prompt on Solaris 11 (or later). For example,: # dlstat LINK IPKTS RBYTES OPKTS OBYTES net0 834.11K 145.91M 575.19K 104.24M net1 7.87K 2.04M 0 0 In this example, the system has two datalinks net0 and net1. The output columns denote input packets/bytes as well as output packets/bytes. The numbers are abbreviated in xxx.xxUnit format. However, one could get the actual counts by simply running dlstat -u R (R for raw): # dlstat -u R LINK IPKTS RBYTES OPKTS OBYTES net0 834271 145931244 575246 104242934 net1 7869 2036958 0 0 In addition, dlstat also supports various subcommands dlstat help The following subcommands are supported: Stats : show-aggr show-ether show-link show-phys show-bridge For more info, run: dlstat help {default|} I will only describe couple of interesting subcommands/options here. For a comprehensive description of all the dlstat subcommands refer dlstat's official manual . For NICs that support multiple rings (e.g. ixgbe), dlstat show-phys -r allows us to query per Rx ring statistics. For example: dlstat show-phys -r net4 LINK TYPE INDEX IPKTS RBYTES net4 rx 0 0 0 net4 rx 1 0 0 net4 rx 2 0 0 net4 rx 3 0 0 net4 rx 4 0 0 net4 rx 5 0 0 net4 rx 6 0 0 net4 rx 7 0 0 In this case, net4 is just a vanity name for an ixgbe datalink. This view is especially useful if one wants to look at the network traffic spread across all the available rings. Furthermore, any of the dlstat commands could be run with -i option to periodically query and display stats. For example, running dlstat show-phys -r net4 -i 5 will emit per Rx ring stats every 5 seconds. This is especially useful while analyzing a live system. Similarly, dlstat show-phys -t could be used to query per Tx ring stats. -r and -t could also be combined as dlstat show-phys -rt to query both Rx as well as Tx stats at the same time. Finally, there is also a quick way to dump ALL the stats. Just run dlstat -A. You probably want to redirect this output to a file because you are going to get a whole load of stats :-).

    Read the article

  • Oracle VM Deep Dives

    - by rickramsey
    "With IT staff now tasked to deliver on-demand services, datacenter virtualization requirements have gone beyond simple consolidation and cost reduction. Simply provisioning and delivering an operating environment falls short. IT organizations must rapidly deliver services, such as infrastructure-as-a-service (IaaS), platform-as-a-service (PaaS), and software-as-a-service (SaaS). Virtualization solutions need to be application-driven and enable:" "Easier deployment and management of business critical applications" "Rapid and automated provisioning of the entire application stack inside the virtual machine" "Integrated management of the complete stack including the VM and the applications running inside the VM." Application Driven Virtualization, an Oracle white paper That was published in August of 2011. The new release of Oracle VM Server delivers significant virtual networking performance improvements, among other things. If you're not sure how virtual networks work or how to use them, these two articles by Greg King and friends might help. Looking Under the Hood at Virtual Networking by Greg King Oracle VM Server for x86 lets you create logical networks out of physical Ethernet ports, bonded ports, VLAN segments, virtual MAC addresses (VNICs), and network channels. You can then assign channels (or "roles") to each logical network so that it handles the type of traffic you want it to. Greg King explains how you go about doing this, and how Oracle VM Server for x86 implements the network infrastructure you configured. He also describes how the VM interacts with paravirtualized guest operating systems, hardware virtualized operating systems, and VLANs. Finally, he provides an example that shows you how it all looks from the VM Manager view, the logical view, and the command line view of Oracle VM Server for x86. Fundamental Concepts of VLAN Networks by Greg King and Don Smerker Oracle VM Server for x86 supports a wide range of options in network design, varying in complexity from a single network to configurations that include network bonds, VLANS, bridges, and multiple networks connecting the Oracle VM servers and guests. You can create separate networks to isolate traffic, or you can configure a single network for multiple roles. Network design depends on many factors, including the number and type of network interfaces, reliability and performance goals, the number of Oracle VM servers and guests, and the anticipated workload. The Oracle VM Manager GUI presents four different ways to create an Oracle VM network: Bonds and ports VLANs Both bond/ports and VLANS A local network This article focuses the second option, designing a complex Oracle VM network infrastructure using only VLANs, and it steps through the concepts needed to create a robust network infrastructure for your Oracle VM servers and guests. More Resources Virtual Networking for Dummies Download Oracle VM Server for x86 Find technical resources for Oracle VM Server for x86 -Rick Follow me on: Blog | Facebook | Twitter | Personal Twitter | YouTube | The Great Peruvian Novel

    Read the article

  • IDC Analyst Report Touts Oracle–Accenture Strategic Initiative

    - by kristin.jellison
    Hi there, partners! Oracle Engineered Systems have been getting some love lately, and we want to share it with you! The market intelligence and advisory firm IDC recently released a report lauding Oracle and Accenture’s strategic initiative to route the performance and flexibility of Oracle Engineered Systems to clients. The report, "Oracle and Accenture Strategic Alliance Places Big Bet on Engineered Systems,” by Steve White, reflects a largely positive analysis of the relationship. White notes that the alliance is “one of the largest in the industry.” Under the relationship, Accenture has incorporated Oracle Engineered Systems—including Oracle Exadata Database Machine, Oracle Exalogic Elastic Cloud, Oracle SuperCluster, and Oracle Exalytics In-Memory Machine—into its leading datacenter transformation consulting services. Together, the two companies have also created bespoke platforms, such as the Accenture Foundation Platform for Oracle, which helps clients accelerate deployments on Oracle Fusion Middleware, running Oracle Exalogic Elastic Cloud and Oracle Exadata Database Machine. Oracle Engineered Systems deliver a single, engineered platform—including server to storage and networking. This makes it easier and cheaper for Accenture clients around the world to prepare their datacenters for managing, processing and analyzing the massive amounts of data they (rightly) anticipate seeing in the next decade. The new solutions can help reduce the effort and cost to migrate any vendor database to an Oracle Engineered Systems platform, which can lower the cost of ownership by up to 50 percent. For its part, Accenture has built a team of 300 consultants to implement and increase the flexibility and stability of client datacenters. This move further expands one of the fastest-growing full-service Oracle Enterprise solutions. Over 52,000 Accenture consultants are qualified to implement, upgrade and outsource the Oracle product suite. Accenture is a Diamond-level member of Oracle PartnerNetwork (OPN). For Oracle Partners, this update should give you at least two things to walk away with. First, this initiative is showing signs of success. As Marty Cole, group chief executive for Accenture’s Technology growth platform, put it, “We are seeing an increasing number of clients recognizing the value of consolidating their databases and taking advantage of the cost and performance benefits delivered by these solutions.” The pipeline is there—and not just for Accenture. Use this example to show your clients that investments in Oracle Engineered Systems are on the rise. Second, recognize that Oracle Engineered Systems represent one of the biggest platforms for growth that Oracle has to offer partners. As part of the agreement, Accenture is able to provide: Platform Readiness Assessments Platform Implementation App Rationalization Database Rationalization Managed Services These are all enablement opportunities you can offer customers under Oracle’s partner programs —to continue building the value of their investments, and the value of your relationship with Oracle. Take a read through the IDC report. To learn more about the partnership, see this press release. Happy selling! The OPN Communications Team

    Read the article

  • links for 2011-02-18

    - by Bob Rhubart
    VirtualBox: Pre-Built Developer VMs "Learning your way around a new software stack is challenging enough without having to spend multiple cycles on the install process. Instead, we have packaged such stacks into pre-built Oracle VM VirtualBox appliances that you can download, install, and experience as a single unit." (tags: oracle virtualization virtualbox) Java Space on Parleys (The Java Source) "'Oracle partnered with Stephan Janssen, founder of Parleys to make this happen. Parleys website offers a user friendly experience to view online content. You can download some of the talks to your desktop or watch them on the go on mobile devices." (tags: oracle java parleys) Why ADF Developers Should Attend ODTUG This Year (Shay Shmeltzer's Weblog) Shay says: "A new track called the "Fusion Middleware" track has been formed and it has lots of sessions for any level of ADF developer. The track is run by several Oracle ACEs who are also involved in the ADF Enterprise Methodology Group." (tags: oracle otn odtug fusionmiddleware) Wrapping up an Exciting Mobile World Congress (The Java Source) "One of the more popular topics in our booth was the use of Java in the Smart Grid. In our booth we were showing off some of the work of the Hydra Consortium whose goal it is to leverage the emerging smart grid infrastructure to securely enable the delivery of personal health data..." (tags: oracle java smartgrid) How to Audit and Monitor BI Publisher Reports Access? (Oracle BI Publisher Blog) "Do you know who is accessing to which report at what time at your reporting environment ? As you delivered the BI Publisher reports to the production environment and your users start using them as part of their daily business operations you might wonder such questions." (tags: oracle otn businessintelligence) Oracle VM VirtualBox 4.0.4 Released! (Oracle's Virtualization Blog) Fat Bloke says: "Oracle made a maintenance update release of Oracle VM VirtualBox version 4.0.4 today. You can Download it now, or read about the changes in the ChangeLog." (tags: oracle otn virtualization virtualbox) Obama says Cloud and Data Center Consolidation Will Help Curb IT Costs | WHIR Web Hosting Industry News "In the report, he estimated that the federal government could reallocate some $20 billion of IT spending to cloud computing technologies and reduce 'data center infrastructure expenditure by approximately 30 percent' through cloud computing." (tags: cloud obama datacenter) Chris Muir: ADF BC: Creating an "EXISTS" View Criteria Oracle ACE Director Chris Muir shares some ADF tips. (tags: oracle otn oracleace adf) Translation and Multiple Languages with Oracle UCM | Bex Huff Bex says: "Last year, I gave a presentation at Oracle Open World about Creating and Maintaining an Internationalized Web Site. Well, I'm happy to announce that one of the several add-ons to UCM is now available for purchase!" (tags: oracle otn enterprise2.0 ecm oracleace) ORACLENERD: Design Documentation Oracle ACE Chet "ORACLENERD" Justice makes a pledge. (tags: oracle otn oracleace database)

    Read the article

  • StreamInsight 1.0 Released

    - by Roman Schindlauer
    One piece in the set of products offered in SQL Server 2008 R2 that has generated a lot of buzz and interest during its CTP phase is StreamInsight, Microsoft’s platform for Complex Event Processing. Microsoft’s information platform vision provides enterprises with a “complete approach” to managing information assets, enabling all businesses to gain strategic value from information from the desktop to the datacenter to the cloud. And StreamInsight V1 is one essential piece in this spectrum. After more than a year of blood, sweat, tears, and insane amounts of coffee we are proud to release the first version of our Complex Event Processing Framework.   Those of you who have been following our Community Technology Previews (CTPs) throughout last year have already had the possibility to familiarize themselves with the product. Early feedback was not only incredibly positive, but also very constructive and strongly influenced the final feature set. Four notable increments over our last public CTP are: Count windows Non-occurrence detection (Anti-Join) Dynamic query composition at runtime Synchronize time across input streams Additionally, many smaller issues and bugs were addressed. A few APIs slightly changed with respect to the November CTP, but porting your application to RTM should not require a lot of effort.   Here are the (english) bits - choosing the evaluation license during setup lets you already play with this version. Before you install, make sure to uninstall any previous CTP version:   StreamInsight X86StreamInsight X64   Within a few days, we will update our product page and add download links and instructions there as well.   The StreamInsight documentation is provided through a help file as part of the installation as well as through Books Online on MSDN. We also invite you to visit the StreamInsight Blog and the StreamInsight Forum, which is a great place to discuss questions and issues with the community and the development team.   Regards,Roman Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • procdump on w3wp.exe: Only part of a ReadProcessMemory or WriteProcessMemory request was completed

    - by JakeS
    I'm having a problem with an IIS application that occasionally spikes up in CPU usage, and am trying to use procdump to get a memory dump for examination. I'm running "procdump.exe -64 -mA 9999" where 9999 is the pid of the process. But every time I do it, I get an error: Only part of a ReadProcessMemory or WriteProcessMemory request was completed. Doing this also recycles the apppool, relieving the CPU spike, so I can't keep trying until I get it right. Does anyone know what is going wrong? EDIT WITH MORE INFO: So far I've failed to generate a debug dump no matter what tool I try. All of them seem to generate the same sort of error. This is 2008 R2 Datacenter running IIS7 with a 64-bit asp.net web site. My best guess is that something is getting blocked, causing some requests to remain open in IIS and gradually using up resources. If I monitor the worker process using the IIS Manager and view all requests, throughout the day I'll start to see some requests that "stick" and run forever. Some of these are for static files. Some are for aspx pages. I cannot see any "common" reason for them. Every once in a while the app pool starts taking up 100% CPU and the only remedy is to kill it.

    Read the article

  • ESXi 4.1 host not recognising existing VMFS datastore

    - by Graeme Donaldson
    Existing setup: host1 and host2, ESX 4.0, 2 HBAs each. lun1 and lun2, 2 LUNs belonging to the same RAID set (my terminology might be sketchy here). This has been working just fine all along. I added host3, ESXi 4.1, 2 HBAs. If I view Configuration / Storage Adapters, I can see that both HBAs see both LUNs, but if I view Configuration / Storage, I only see 1 datastore. host1/2 can see both LUNs and I have VMs running on both too. I have rescanned, refreshed and even rebooted, but host3 refuses to acknowledge 1 of the datastores. Does anyone know what's going on? Update: I re-installed the host with ESX (not i) 4.0, same version as the existing hosts and it's still not recognising the vmfs. I think I'm going to SVmotion everything off that datastore then format it. Update2: I've created the LUN from scratch and the problem gets even weirder. I've presented the LUN to all 3 hosts, and I can see the LUN in the vSphere client's Configuration / Storage Adapters section on all 3 hosts. If I create a datastore on the LUN via the Configuration / Storage section on host1, it works fine and I can create an empty folder via datastore browser, but the datastore is not seen by the host2 and host3. I can use the Add Storage wizard on host2 and it will see the LUN. At this point the "VMFS Label" column has the label I gave with "(head)" appended. If I try the Add Storage wizard's "Keep the existing signature" option, it fails with an error "Cannot change the host configuration." and a dialog box that says 'Call "HostStorageSystem.ResolveMultipleUnresolvedVmfsVolumes" for object "storageSystem-17" on vCenter Server "vcenter.company.local" failed.' If I try the Add Storage wizard's "Assign a new signature" option on host2, it will complete and the VMFS label will have "snap-(hexnumber)-" prepended. At this point its also visible on host3, but not host1. I have a similar setup in a different datacenter which didn't give me all this trouble.

    Read the article

  • BSOD Dump - EXCEPTION_DOUBLE_FAULT - ON Windows 2008 Server 64bit

    - by Mark K
    Hello, my windows 2008 server (datacenter ed) 64bit , have recently created a series of BSOD on a different applications. the error message is in general EXCEPTION_DOUBLE_FAULT. Can anyone please help with the analysis of the dump file bellow- Best regards, Mark 2: kd !analyze -v * Bugcheck Analysis * * UNEXPECTED_KERNEL_MODE_TRAP (7f) This means a trap occurred in kernel mode, and it's a trap of a kind that the kernel isn't allowed to have/catch (bound trap) or that is always instant death (double fault). The first number in the bugcheck params is the number of the trap (8 = double fault, etc) Consult an Intel x86 family manual to learn more about what these traps are. Here is a portion of those codes: If kv shows a taskGate use .tss on the part before the colon, then kv. Else if kv shows a trapframe use .trap on that value Else .trap on the appropriate frame will show where the trap was taken (on x86, this will be the ebp that goes with the procedure KiTrap) Endif kb will then show the corrected stack. Arguments: Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT Arg2: 0000000080050033 Arg3: 00000000000006f8 Arg4: fffff800018b1678 Debugging Details: BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP PROCESS_NAME: CustomerService. CURRENT_IRQL: 1 EXCEPTION_RECORD: fffffa6004e45568 -- (.exr 0xfffffa6004e45568) ExceptionAddress: fffff800018a0150 (nt!RtlVirtualUnwind+0x0000000000000250) ExceptionCode: 10000004 ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000000 Parameter[1]: 00000000000000d8 TRAP_FRAME: fffffa6004e45610 -- (.trap 0xfffffa6004e45610) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000050 rbx=0000000000000000 rcx=0000000000000004 rdx=00000000000000d8 rsi=0000000000000000 rdi=0000000000000000 rip=fffff800018a0150 rsp=fffffa6004e457a0 rbp=fffffa6004e459e0 r8=0000000000000006 r9=fffff8000181e000 r10=ffffffffffffff88 r11=fffff80001a1c000 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl zr na po nc nt!RtlVirtualUnwind+0x250: fffff800018a0150 488b02 mov rax,qword ptr [rdx] ds:00000000000000d8=???????????????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff800018781ee to fffff80001878450 STACK_TEXT: fffffa6001768a68 fffff800018781ee : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt!KeBugCheckEx fffffa6001768a70 fffff80001876a38 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiBugCheckDispatch+0x6e fffffa6001768bb0 fffff800018b1678 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDoubleFaultAbort+0xb8 fffffa6004e44e30 fffff800018782a9 : fffffa6004e45568 0000000000000001 fffffa6004e45610 000000000000023b : nt!KiDispatchException+0x34 fffffa6004e45430 fffff800018770a5 : 0000000000000000 0000000000000000 0000000000000000 0000000000000001 : nt!KiExceptionDispatch+0xa9 fffffa6004e45610 fffff800018a0150 : fffffa6004e46638 fffffa6004e46010 fffff80001965190 fffff8000181e000 : nt!KiPageFault+0x1e5 fffffa6004e457a0 fffff800018a3f78 : fffffa6000000001 0000000000000000 0000000000000000 ffffffffffffff88 : nt!RtlVirtualUnwind+0x250 fffffa6004e45810 fffff800018b1706 : fffffa6004e46638 fffffa6004e46010 fffffa6000000000 0000000000000000 : nt!RtlDispatchException+0x118 fffffa6004e45f00 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDispatchException+0xc2 STACK_COMMAND: kb FOLLOWUP_IP: nt!KiDoubleFaultAbort+b8 fffff800`01876a38 90 nop SYMBOL_STACK_INDEX: 2 SYMBOL_NAME: nt!KiDoubleFaultAbort+b8 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4a7801eb FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b8 BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b8 Followup: MachineOwner

    Read the article

  • How much network latency is "typical" for east - west coast USA?

    - by Jeff Atwood
    At the moment we're trying to decide whether to move our datacenter from the west coast (Corvallis, OR) to the east coast (NY, NY). However, I am seeing some disturbing latency numbers from my location (Berkeley, CA) to the NYC host. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: Berkeley to NYC server: 215 ms latency, 46ms transfer time, 261ms total Berkeley to Corvallis server: 114ms latency, 41ms transfer time, 155ms total some URLs if you want to try yourself: http://careers.stackoverflow.com/content/cso/img/logo.png (NY, NY) http://serverfault.com/cache/logo.png (Corvallis, OR) It makes sense that Corvallis, OR is geographically closer to Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only went up 10%, yet the latency went up ten times as much! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... http://serverfault.com/questions/63531/does-routing-distance-affect-performance-significantly http://serverfault.com/questions/61719/how-does-geography-affect-network-latency http://serverfault.com/questions/6210/latency-in-internet-connections-from-europe-to-usa ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

    Read the article

  • SQL Server 2008 Remote Access

    - by Timothy Strimple
    I'm having problems connecting to my SQL Server 2008 database from my computer. I have enabled remote connections as described in this answer (http://serverfault.com/questions/7798/how-to-enable-remote-connections-for-sql-server-2008). And I have added the ports listed on the microsoft support page to our Cisco Asa firewall and I'm still unable to connect. The error I'm getting from the SQL Management Studio is: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060) Once again, I have double and triple checked that remote connections are enabled under the database properties and that TCP is enabled on the configuration page. I've added tcp ports 135, 1433, 1434, 2382, 2383, and 4022 as well as udp 1434 to the firewall. I've also checked to make sure that 1433 is the static port that is set in the tcp section of the database server configuration. The ports should be configured correctly in the firewall since http/https and rdp are all working and the sql server ports are setup the same way. What am I missing here? Any help you could offer would be greatly appreciated. Edit: I can connect to the server via TCP on the internal network. The servers are colocated in a datacenter and I can connect from my production box to my development box and vice versa. To me that indicates a firewall issue, but I've no idea what else to open. I've even tried allowing all tcp ports to that server without success.

    Read the article

  • Terminal server performance over high latency links

    - by holz
    Our datacenter and head office is currently in Brisbane, Australia, and we have a branch office in the UK. We have a private WAN with a 768k link to our UK office and the latency is at about 350ms. The terminal server performance is reeeeealy bad. Applications that don't have too much animation or any images seem to be okay. But as soon as they do, the session is almost unusable. Powerpoint and internet explorer are good examples of apps that make it run slow. And if there is an image in your email signature, outlook will hang for about 10 seconds each time a new line is inserted, while the image gets moved down a few pixels. We are currently running server 2003. I have tried Server 2008 R2 RDS, and also a third party solution called Blaze by a company called Ericom, but it is still not too much better. We currently have a 5 levels dynamic class of service with the priority in the following order. VoIP Video Terminal Services Printing Everything else When testing the terminal server performance, the link monitored using net-flows, and have plenty we of bandwidth available, so I believe that it is a latency issue rather than bandwidth. Is there anything that can be done to improve performance. Would citrix help at all?

    Read the article

  • HTTP Upload Problems

    - by jfoster
    We are running a marketplace on ColdFusion8 and IIS with a widely geographically distributed user base and have been receiving complaints of issues with some HTTP uploads. Most of the complaints are coming from geographically distant locations from our main datacenter on the US east coast. I've attempted to upload the same 70MB file from a US West coast test server to both our main site and a backup running the same code on a different network route and I saw the same issues fairly consistently in both places, so I've ruled out the code, route, and internal network errors. I've also tested uploads using both the native cf upload tag and a third party tool called SaFileUp. I saw the same issues with both upload tools, so I also don't think this is necessarily a ColdFusion problem. I don't have any problems uploading the test file from the East coast to other east coast servers, so I'm beginning to think that the distance between our users and our equipment is a factor. I've also found that smaller files are more likely to succeed than large ones (< 10MB) I tried the test upload with both IE and FF and did notice a difference in the way that the browsers seemed to handle packet errors. IE seemed to have a tough time continuing an upload after dropped / bad packets, whereas FF seemed to have the ability to gracefully resume an upload after experiencing packet problems. Has anyone experienced similar issues? Is there anything we can do on our side to make uploads more forgiving to packet loss or resumable after an error? A different upload tool etc… Do we need upload servers in more than one location to shorten the network routes between clients and servers? Does anyone think that switching uploads to SSL will help (no layer7 packet sniffing may lead to a smoother upload). Thanks.

    Read the article

  • How much network latency is "typical" for east - west coast USA?

    - by Jeff Atwood
    At the moment we're trying to decide whether to move our datacenter from the west coast to the east coast. However, I am seeing some disturbing latency numbers from my west coast location to the east coast. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: West coast to east coast: 215 ms latency, 46 ms transfer time, 261 ms total West coast to west coast: 114 ms latency, 41 ms transfer time, 155 ms total It makes sense that Corvallis, OR is geographically closer to my location in Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only increased 10%, yet the latency increased 100%! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... Does routing distance affect performance significantly? How does geography affect network latency? Latency in Internet connections from Europe to USA ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

    Read the article

  • Dropped connections between Linux Servers in Data Center

    - by Emil H
    I have a number of linux servers at a us-based datacenter. The servers were installed by the hosting company, and are running fedora core. We're experiencing problems with dropped connections. The issue seems to be that when we attempt to connect to one of the other servers after a period of inactivity, the first connection attempt will fail, and sometimes the second. However, after that the connection succeds and it works for a while. This happens for both mysql connections and raw socket connections, but only seems to occur when connecting to some of our servers. The confusing part is that it some of the servers for which we see different behaviors have identical hardware configuration and software. For example, it happens when connecting to a server called mysql2, but not for a server called mysql3. These servers were installed at the same time, but the same specifications. The problem can be reproduced somewhat reliably, but only after waiting fifteen minutes to half an hour. This makes it hard to diagnose, and even harder since I'm not really sure what to look for. I realize that connections sometimes failed, and that we should write our applications to compensate for this but these servers all in the same data center. Why would it matter if two servers haven't communicated for a while? Does anybody have an idea what might be causing this? Is it a server configuration problem or a network problem that I should contact the hosting company about. What do I tell them to look for? Unfortunately our experience has been that the support staff doesn't investigate problems in depth unless we give them detailed directions.

    Read the article

  • Getting started with webserver clustering.

    - by Ernie
    I work for a small ISP, and we host about 250 domains and all the stuff that goes along with that: DNS, mail, spam filtering, and backups. Currently, we have separate DNS servers (two of them) and mail servers (outgoing mail is actually on the secondary DNS server, but was previously on its own server). In the past, this was done as an insurance measure. The last thing we need is for some doofus (usually yours truly) to hose a server, taking out DNS and mail right along with it, or for spammers to jam our incoming SMTP server, preventing outgoing mail from being sent too. In the past, this was a problem, and our servers were set up the way they are now to combat it. However, clustering solutions like Sun's Cobalt RAQ (in days of olde) and Virtualmin appear to cater to an all-in-one approach, then deal with failures through redundant servers. I have avoided this thus far, but we've been using Virtualmin on our web server for a while now, and I'd like to expand into using it for a high availability cluster. Our networking partner has recently built a datacenter that has eliminated all of our other bugaboos like network, cooling, and power issues, so now the only thing left to go wrong is me hosing a server, which happened earlier this month. One of the bigger reasons we've avoided going this route is because our hardware requirements aren't particularly high. One server easily handles all the sites we host (most of them are flat sites). Also, load-balancing routers tend to be expensive and complicated. All that I'm really expecting to do is building a two-node cluster for redundancy so that when I hose a server (however rare that might be), we're not out for 8-12 hours while I rebuild it. What I need to know is how to get started, and if I'm really in a position to bother with this kind of thing at all.

    Read the article

  • High latency issue for web service call from amazon aws ec2 to local server

    - by SibzTer
    We have a legacy web application that is running in our data center on premises located in Houston. We have a developed a new .net 4 based web application in order to provide new features to customers. The new web application is hosted in amazon aws ec2 environment (N. Virginia region us-east-1b zone). In order to get seamlessly integrate with the legacy application the new web application makes web service calls to retrieve data. We are seeing an unusually high latency time in the order of 5+ seconds for these web service calls. The exact same web service call returns in less than a second on our local PCs (which makes sense given physical proximity to the actual server). The weird part is that we have developers in California who also have the same milliseconds response time. We are testing the web service response using third party tools such as SoapUI, Google Chrome extensions such as Advanced REST Client, Postman REST Client, etc. As if this wasnt weird enough, we have noticed the same low latency from certain other ec2 instances while testing which are in the same region and availability zone as well. If we experienced the high latency consistently from all the ec2 instances I could understand. But there is something else going on. Comparing the various stats and results between the low latency and high latency ec2 servers do not show any significant differences: ping (constant 40ms), tracert, winmtr, etc. We have instances that are in the VPC as well. So I tried both the public and private IP address of the web service host server and that didnt make a difference either for the above results. We need to resolve this latency issue as this is causing the resulting web pages to load very slowly (almost 15+ seconds which is simply unacceptable). The ec2 instances have Windows Server Datacenter 64 bit. Let me know if there is any other infor I can provide to help diagnose this.

    Read the article

  • online backup plan for a home office with servers

    - by TiernanO
    So, i am in the process of tweaking my spending and i need to change my backup plan... I am currently using a mix of JungleDisk and ZManda ZCB to backup files on my MacBook Pro, Main Windows Server Wrokstation, a dedicated Windows Server in a datacenter, and various other machines and file sources. The problem is the cost: this month, it has cost me about $90 to backup a little over 500Gb... This amount of data will increese over time too, since i am backing up Photos (24Mb RAW images + 4-8MB JPEGs), Videos (various cameras shooting 720p and 1080p), Music, Movies, TV shows and Apps from iTunes (though with iTunes cloud, this might not need to be backed up again) and source code... I have looked at the likes of Mozy, CrashPlan+ and Pro, Backblaze and Carbonite, but each have their problems: Mozy seems overly expenvice per gig at 50C Crashplan wont sell to me since i am outside the US (they hide it on their site... hidden in the FAQ section!) Backblaze dont support Windows Server Carbonite business pricing is $600 up front for 500Gb of storage... Fro $229, they will not backup Windows Servers. So, other than those, Jungle Disk (at 15c per Gig) or ZManda (also at 15c per Gig) what other options are there? what are other people using?

    Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15  | Next Page >