Search Results

Search found 1667 results on 67 pages for 'dhcp'.

Page 11/67 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Configuring NAT and static IP on Cisco 877W

  - by David M Williams

  Hi all, I'm having trouble setting up a static IP reservation on a network. What I want to do is assign IP 192.168.1.105 to MAC address 00:21:5d:2f:58:04 and then port forward 35394 to it. If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software I have done this - service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool ClientDHCP network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ip dhcp pool NEO host 192.168.1.105 255.255.255.0 hardware-address 0021.5D2F.5804 ip nat inside source static tcp 192.168.1.105 35394 <PUBLIC_IP> 35394 extendable However, the machine is getting assigned IP address 192.168.1.101 not .105 ... any suggestions? Thanks !

  Read the article

• IPv4 private address assignment

  - by helloworld922

  I'm working on a private network which uses static IPv4 addresses as well as DHCP addressing for the physical LAN network. At a previous company I worked at they would assign static addresses in the 10.*.*.* space and all DHCP/LAN addresses were assigned in the 192.168.*.* space. Both of these address spaces are defined in the IPv4 private address space and there were never any internal conflicts. From personal experience at home, school, at work, and pretty much any other machine I've dealt with extensively (Windows and a few Linux distros), the DHCP server would always by default choose an address from the 192.168.*.* address space. Now my question is can I rely on this behavior? Do DHCP servers always by default assign from the 192.168.*.* pool (or any pool other than the 10.*.*.* pool), leaving the 10.*.*.* pool free for private static addressing? If not, under what conditions might a DHCP server choose an address in the 10.*.*.* address space?

  Read the article

• DHCP request error. Send_packet now permitted, How to debug, What does it mean

  - by Sparsh Gupta

  Hello I recently installed CSF firewall and have made live a new server which is accepting around 600req/second. Its basically a reverse proxy and I found in pingdom and munin that for a particular time, the response times of the server increased by 3 folds. I looked into logs and exactly at that point, I found loads of entries like this: Feb 27 15:22:09 li235-57 dhclient: DHCPREQUEST of <My IP address> on eth0 to 207.192.68.72 port 67 Feb 27 15:22:09 li235-57 dhclient: send_packet: Operation not permitted Can you help me understand what went wrong and what exactly happened. Is there any settings I should change in CSF or any pointer to debug this further Thanks

  Read the article

• Does exists a software that act as DHCP service?

  - by marco.ragogna

  I need to configure a network made by a simple old hub with 24-ports a server and some clients. Both clients and server has Windows XP or later. If all clients has the DCHP service enabled does exists a software that, installed on the server, assigns automatically to the clients an IP based on a predefined range?

  Read the article

• Linux static dhcp ip for visitor access internet without requesting MAC address?

  - by ???

  Currently, my company internet access for visitor are required to request MAC address from them if they want to access to internet. Can we do something like the Hotel wifi? they just access to the network and just key in the password, then they are able to access the internet for certain time of period. so far, i have looking for linux solution, but they are no such program/application available. do you all have any experience on it? Regards, MH

  Read the article

• Thunderbird is unable to find server in DHCP controlled network.

  - by Skizz

  I have a network which consists of linux server and a combination of WinXP, Win7 and linux clients. All the systems are given dynamic IP addresses by the router which connects them all together. The server hosts an IMAP mail server. On Win7 and WinXP Thunderbird can access the IMAP server without any problems. On the linux client, using the same IMAP parameters, Thunderbird is unable to connect to the server. How do I get Thunderbird to find the server? I'm not sure if this is a linux system configuration problem or a Thunderbird issue. Additional note: The linux client is running Gnome, the server has a series of Samba shares defined. In the client, doing Places-Connect to Server and selecting Windows Share and specifying the server name, the Samba share is mounted OK.

  Read the article

• How do I set a static DNS nameserver address on Ubuntu Server?

  - by Aleks

  I am trying statically to set DNS server addresses in my Ubuntu server running as virtual machine. I followed all recommendations on official Ubuntu support pages but I simply cannot get rid of my ISP's DNS servers set by DHCP. I assigned br0 interface on my host machine static IP address and eth0 on VM to use Google DNS and my own local DNS running on the second vm by setting it in /etc/network/interfaces. Tried to fiddle with head base and tail files in /etc/resolvconf/resolv.conf.d/ and tried to shuffle interface-order in /etc/resolvconf/interface-order but when I restarted network service I got the ISP's DNS addresses back every time. Is there a way that I can disable resolvconf and set up my resolv.conf file manually as I always did on Red Hat? Or at can you tell me which hook script keeps putting ISP DNSs in resolv.conf? My ISP don't allow me to change DHCP settings on my router so I cannot do it that way. Why is such a simple thing such as setting DNS servers got so complicated???

  Read the article

• PXE booting on old computer

  - by kosciak

  So my computer is not working - the disk is totally cleared, I've deleted GRUB and PLOP which I used to install new system, because CD-Rom is broken and BIOS is old (whole computer is old, it's Sony Vaio PCG-GR250) so it won't allow me to do it via USB and I got no floppy drive :) the only way is to PXE boot PLOP and install Linux from USB after PLOP has been opened. (I'm not a specialist but that's how I see it) I'm using Mac OS X 10.9 and I followed number of tutorials how to set up TFTP and DHCP server and I got PLOP here, but when I boot up with PXE it says that it found DHCP but TFTP timed out. Any help or alternative way of rescuing old laptop? Thanks in advance!

  Read the article

• Question for class

  - by Tyler

  I have a question for class that I cannot figure out, I was hoping the helpful folks at Ask Ubuntu could help. The question is basically this: Your Linux system appears to have a DHCP problem. You decide to release and renew the DHCP lease by running the following command "SUDO IFCONFIG ETH0 DOWN". The command gives an error message saying Linux doesn't recognize the command. What's the problem? Any ideas? Thanks in advance.

  Read the article

• Having set up a DCHP server, what do I need to do for the rest of my network?

  - by fredley

  I've got a Raspberry Pi arriving any day now, and I intend to use it (amongst other things) as a DHCP server. Currently we have a few devices on our network to which we would like to assign static IPs, and a router, which is currently the DHCP server (the router can assign static IPs, but is buggy as hell, I've never got the config to stick for more than a few hours). Having connected the Pi to the network and configured dhcpl-3-server, what do I need to do on the rest of my network so that it works properly (clients get their IPs from the Pi, and use the Router as the default gateway)?

  Read the article

• I try install dhcp3-server, but /etc/init.d/dhcp3-server file is missing. Whats going on?

  - by hydroparadise

  I've found several how-to's that essentially go through the same process in setting up DHCP. Here's a link that has the list of step needed install and setup DHCP. I follow all the steps and find that the sudo /etc/init.d/dhcp3-server restart portion returns command not found only to reveal the the file doesn't even exist. I've installed (sudo apt-get install dhcp3-server) and uninstalled (sudo apt-get remove dhcp3-server) two or three times. I'm pretty sure my config files are good because I've had to check them three times. But I don't think I'm to that point of being able to see them action it. I cant control the process. Why is the file missing? How is it supposed to get there? Help?

  Read the article

• Forwarding data between two interfaces

  - by user84471

  I installed Ubuntu server 12.04 after that I installed dhcp3-server and configured it like this: At isc-dhcp-server INTERFACES="eth0" And in dhcpd.conf # A slightly different configuration for an internal subnet. subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.5 192.168.1.100; option domain-name-servers 192.168.1.1; option domain-name "nazwa.local"; option routers 192.168.1.1; option broadcast-address 192.168.1.255; default-lease-time 600; max-lease-time 7200; } Also I have two eth interfaces: # second netowrk interface auto eth0 iface eth0 inet static address 192.168.1.1 netmask 255.255.255.0 # The primary network interface auto eth1 iface eth1 inet dhcp When I plug computer to eth0 I get propertly ip adress but I can't visit any sites. I do even this: echo 1 > /proc/sys/net/ipv4/ip_forward

  Read the article

• Is there any way to force my Linux box to always boot up with a self-assigned IP address?

  - by Jeremy Friesner

  This is perhaps an unusual request: I'm trying to get a Debian Linux box to always give itself a self-assigned IP address (i.e. 169.254.x.y) on boot. In particular, I want it to do that even when there is a DHCP server present on the LAN. That is, it should not request an IP address from the DHCP server. From what I can see in the "man interfaces" text, there is an option for "manual", and an option for "dhcp". Manual assignment won't do, since I need multiple boxes to work on the same LAN without requiring any manual configuration... and "dhcp" does what I want, but only if there is no DHCP server on the LAN. (A requirement is that the functionality of these boxes should not be affected by the presence or absence of a DHCP server). Is there a trick that I can use to get this behavior? EDIT: By "no manual configuration", I mean that I should be able to take this box (headless) to any LAN anywhere, plug in the Ethernet cable, and have it do its thing. I shouldn't have to ssh to the box and edit files to get it working each time it is moved to a different LAN.

  Read the article

• CVE-2011-4539 Denial of Service vulnerability in ISC DHCP

  - by chandan

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2011-4539 Denial of Service vulnerability 5.0 ISC DHCP Solaris 11 11/11 SRU 04 This notification describes vulnerabilities fixed in third-party components that are included in Sun's product distribution.Information about vulnerabilities affecting Oracle Sun products can be found on Oracle Critical Patch Updates and Security Alerts page.

  Read the article

• CVE-2012-3955 Denial of Service (DoS) vulnerability in ISC DHCP

  - by RitwikGhoshal

  CVE DescriptionCVSSv2 Base ScoreComponentProduct and Resolution CVE-2012-3955 Denial of Service (DoS) vulnerability 7.1 ISC DHCP Solaris 11 11/11 SRU 13.4 This notification describes vulnerabilities fixed in third-party components that are included in Oracle's product distributions.Information about vulnerabilities affecting Oracle products can be found on Oracle Critical Patch Updates and Security Alerts page.

  Read the article

• PXE boot not happening due to DHCP issue .

  - by Nishant

  I could PXE boot this laptop to some extent yesterday but all of a sudden after some time it started to show this error message . I reinstalled my tftp server etc in between . It seems that DHCP lease issue is happening . The client wants some specific address I think ? How to resolve List item Client requested address 0.68.101.98 [06/06 04:37:27.658] no more address or address previously allocated by another server [06/06 04:37:27.658] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:29.670] Client requested address 0.68.101.98 [06/06 04:37:29.670] no more address or address previously allocated by another server [06/06 04:37:29.670] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:33.679] Client requested address 0.68.101.98 [06/06 04:37:33.679] no more address or address previously allocated by another server [06/06 04:37:33.679] Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 00:0E:7B:23:FA:11 [06/06 04:37:41.699]

  Read the article

• pptp server 2003 hands out gateway from nic not dhcp server

  - by Pete

  I have created a pptp RRAS server for a handful of clients to connect to. I would like them to use the servers default gateway (.1) for internet access. They are able to successfully connect (& see LAN) but it then cuts them off the internet. I understand that all internet traffic would be routed through the pptp server but that's ok since I have enough pipe. The problem seems to be that: the clients gateway shows as their assigned RAS ip. The clients assigned DNS settings seem to be what is set to the servers nic not what I have specified in dhcp (which is the same server). DHCP relay agent properties points to the nic DHCP is running on (192.168.100.163). .1 is gateway in nic hw properties & dhcp. I have different dns secondary & third entries on my nic properties than what dhcp is configured for. The problem is that I have a 10.10.1.x network that people can not see if they uncheck the gateway option but, they are then unable to see our other hosted sites on the internet.

  Read the article

• Assigning a home DNS to be secondary only?

  - by Sanarothe

  Hi. I have a small domain lab set up at home, including DNS/DHCP on the Win2008 server. I'd like to be able to refer to my domain clients by name, but I find that I get a slowdown when using an internal DNS. Win DNS refers to my ISP's upstream dns (I also tried Google's DNS servers for a little while) but it feels like there's an extra couple seconds for each request when I'm using anything except the DNS servers fetched via DHCP from my ISP. I tried adding my local DNS to my router's DHCP (Need to use router to fetch DHCP info from ISP, even though none of it ever changes, since I'm behind NAT) So, my question is: Is there any way to set my internal DNS server to be secondary to a dynamically retrieved upstream DNS? I want the internal server to be queried only if the ISP dns fails, or to be queried only for a certain TLD (.iv right now. I guess for best practices I should change it to .internal)

  Read the article

• setting up a WGR614v7 behind a linux box

  - by commodore fancypants

  Here's the setup, I have an openSUSE box with 2 NICs, one goes to my home network router, the other has DHCP running and it attached to a wireless router. I'm trying to get this setup to work before I switch to the linux box as my home network router. My DHCP will offer the wireless router (a WGR614v7) an address, but anything that connects to the wireless router ends up with a APIPA address. I have all the firewalls on the wireless network turned off as well as the wireless router's own DHCP. The linux box isn't offering addresses to anything past the wireless router. Is this a problem with the router or my DHCP setup? For testing purposes, I have both NICs set in the internal zone and I've tried wireless and wired connections to the WGR614v7 both to no avail.

  Read the article

• Does Dynamic DNS require separate subdomains?

  - by kce

  Hello. I have a functioning DHCP/DNS (ISC Bind 9.6, DHCP 3.1.1) server running on Debian that I would like to add DynamicDNS functionality to. I have a pretty simple question: Does DynamicDNS require (or recommend) separate sub-domains? I have seen a few tutorials where the the clients that are acquiring their IP addresses and other networking information via DHCP are on a different sub-domain as the servers which are statically configured (both in terms of IP, and DNS). For example: All the clients are on ws.example.org and the servers on example.org. Right now all of our servers and clients are in the same domain (example.org) but spread across different zone files (because we have multiple subnets). The clients are configured with DHCP and the servers are configured statically. If I want to setup DynamicDNS for the clients should I use a separate sub-domain? What's the best practice here (and why or why not would it be a bad idea to do otherwise)? Thanks.

  Read the article

• Setting up Ubuntu Server as a Router with DHCPD and 3 Ethernet devices

  - by cengbrecht

  My configuration: Ubuntu 12.04 DHCP3-server eth0, eth1, eth2 Edit: removed br0&br1 eth0 is the external connection eth1 & eth2 are the internal network eth1 and eth2 are supposed to be seperate networks of student/teachers respectivly. What I would like to have is the internet from external device bridged to device 1 and 2, with the DHCP server controlling the two internal devices. Its already working with DHCP, the part I am stuck on is bridging for internet. I have setup a script that I found here: Router With the original script he linked here: Ubuntu Router Guide echo -e "\n\nLoading simple rc.firewall-iptables version $FWVER..\n" IPTABLES=/sbin/iptables #IPTABLES=/usr/local/sbin/iptables DEPMOD=/sbin/depmod MODPROBE=/sbin/modprobe EXTIF="eth0" INTIF="eth1" INTIF2="eth2" echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF" echo " Internal Interface: $INTIF2" EXTIP=`ifconfig $EXTIF | grep 'inet addr:' | sed 's#.*inet addr\:\([0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\).*#\1#g'` echo " External IP: $EXTIP" #====================================================================== #== No editing beyond this line is required for initial MASQ testing == The rest of the script below this is as is. I can get ip from the eth1 & eth2 devices, and my computer can see them, and them it, however, internet is not being passed through. If you need more information please just let me know. EDIT: So I had a 255.255.254.0 network, I believe that was causing the issue. Not sure if it will matter on the second card, I will test later. After changing the subnet to 255.255.255.0 the pings will pass through, however, I cannot get DNS requests to pass? My new Config for Firewall Rules # /etc/iptables.up.rules # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *mangle :PREROUTING ACCEPT [39:4283] :INPUT ACCEPT [39:4283] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [12:4884] :POSTROUTING ACCEPT [13:5145] COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -j LOG -A FORWARD -m state -i eth1 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth2 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth1 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth2 --state NEW,ESTABLISHED,RELATED -j ACCEPT COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *nat :INPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.1.25 COMMIT # Completed on Wed Nov 28 19:43:28 2012 Not sure what else you may need, but I am using Webmin to control the server(Needed for the operators on site to know how to use it.) If you could explain it as standard CLI commands, or edits to this file directly then we should be ok. :) And thanks again Erik, I do believe your edits did help.

  Read the article

• Can I use a Windows Server 2003 Domain Controller but my home router for DNS?

  - by NetworkingWannabie

  Hi All Probably easiest to start with a description of my current setup, which works (oh, and this is a home setup not an office or anything): I have an ADSL modem with a static IP address (192.168.128.1), and its DHCP capability is disabled. I have a permanently powered up Windows Server 2003 machine with a fixed IP (192.168.128.2) which provides my domain controller, dhcp, and dns. The default gateway for everything is my ADSL modem everything is setup to use the WS2003 machine as the primary DNS with the ADSL modem as Secondary DNS just in case the server goes down (everything includes the server itself). Lastly, just in case it's relevant, I have my DHCP leases set to infinite (or whatever the right term is). Everything is pretty hunky dory. Except, that is, for the fact that my server is ALWAYS on, and it isn't always used, so I'm burning juice that I don't need to - my server burns around 120W which isn't immense but isn't irrelevant either, so I'd like to put it into a stand-by state when it isn't being used (the more standby the better) and then get the clients to wake it up. Am I correct in assuming that this won't work at the moment - A given client would need an IP address to wake the machine up, and it needs to machine to be awake to get an IP - catch 22? Assuming I'm correct, can I move to using my router (which is always on) for DHCP? What impact will this have on DC and DNS? Alternatively, does anyone have a better way for me to achieve this? Can I get the server to wake up when it sees clients look for a DHCP server, etc? Wow, that came out longer than expected! Thanks for your help.

  Read the article

• setting up a WGR614v7 behind a linux box

  - by commodore fancypants

  Here's the setup, I have an openSUSE box with 2 NICs, one goes to my home network router, the other has DHCP running and it attached to a wireless router. I'm trying to get this setup to work before I switch to the linux box as my home network router. My DHCP will offer the wireless router (a WGR614v7) an address, but anything that connects to the wireless router ends up with a APIPA address. I have all the firewalls on the wireless network turned off as well as the wireless router's own DHCP. The linux box isn't offering addresses to anything past the wireless router. Is this a problem with the router or my DHCP setup? For testing purposes, I have both NICs set in the internal zone and I've tried wireless and wired connections to the WGR614v7 both to no avail.

  Read the article

• One Windows Domain workstation can ping gateway but gets no internet access

  - by dindeman

  One of the (Windows XP SP3) workstations of our Windows Domain could not access internet anymore, this problem suddenly happened overnight. The domain controllers (there are three of them) are all running Windows Server 2008. First I compared the output of ipconfig /all on the faulty workstation with the output of a working workstation and it was just fine as it had always been. In particular the default gateway was correct and always remained pingable from the faulty workstation. I guessed that something was wrong with the DHCP service and I restarted the DHCP server service on all of our three DCs as well as the DHCP client service on the faulty workstation. This didn't solve the issue. I then thought of renewing the DHCP lease with ipconfig /release and ipconfig /renew and here is my first question: why did this never work? The same IP address (192.168.0.45) kept being assigned despite all my attempts to renew it (note that all our workstation are getting their TCP/IP automatically.) Even by leaving the domain and changing the computer name the same address was yet again obtained... Anyway I then proceeded to switch the TCP/IP configuration for that machine manually to another free valid IP address (192.168.0.41)... and then the internet access came back! I then cleared any traces of the previous IP in the DHCP leases list and in the DNS tables of our DCs and, after setting back the TCP/IP configuration to 'automatic', finally, the new lease would be granted (192.168.0.41) alongside with the internet access. My second question: what went suddenly wrong with the original IP address?

  Read the article

• Uninstalled server 2008 now router won't handle DHCP

  - by john

  My set up is this. server behind router, router has a server and switch connected to it with multiple computers. router used to serve DHCP and DNS, a couple of days ago installed AD, DNS and DHCP on the server, and the server gave out IP's. For various reasons we had to uninstall the domain on our server. I removed AD, DHCP and DNS from the roles and set the router back to serving DHCP and DNS. Now I can't get computers on the network. I reset my router back to factory defaults, and if I plug a computer directly into the router I can get a IP address, but all the computers behind the switch can't get an IP address and can't see the router. All my computers say unidentified network, and if I ping the router it says host is unreachable. On the other hand, my wireless devices are just fine and connect no problem. But for desktops, ipconfig /release doesn't release anything and /renew can't find a server to renew on. My router log shows several FIN scans but they are from innocuous websites (google, netgear) and it shows a couple of smurf attacks but they are all from my external IP. Any ideas? the server isn't even connected to the route right now, and all the computers are set for dynamic IP addresses.. I don't know what else to try? Any help?

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >