Search Results

Search found 518 results on 21 pages for 'hooked'.

Page 11/21 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• small Windows network w/ printer issue

  - by user33666

  printer 1 connected to the desktop printer 2 connected to the same desktop that desktop is connected via Cat 5 to a wireless router a notebook is connected to that same router via WiFi The desktop Control Panel has just been reconfigured to share printers. (I assume this means that the desktop will now allow a notebook coming through the router to be able to access the two printers that are presently hooked up via the desktop--am I correct? Is that what it means?) The desktop can still print to either printer. It is presently okay. This notebook/printer relationship is a new configuration. The notebook, however, can't print at all (yet it can access the internet just fine). Any suggestions for it to be able to access the printers and be able to print via the desktop via the router? Thank you for any assistance.

  Read the article

• Is there a way to share a scanner with an Airport Extreme?

  - by Electrons_Ahoy

  I've got an Airport Extreme as my home network's router. (Sidebar: I love it.) The printer sharing is pretty phenomenal - I've got my printer hooked up to the base station and all the machines in the house can print to it just fine. However, I have one of those combined scanner/printers, and nothing on the lan seems to be able to see the scanner. Is there a way to get the Airport Extreme / Bonjour to also share the scanner half of the device? For the record, this is an all Windows LAN, so I'm using Bonjour for Windows to get the print sharing to work. Also, I'm hoping to not add a whole stack of extra software to the ecosystem - only one machine in the house needs the scanner, so I can just plug the printer back into that machine and share the printer that way. Still, the Airport and Bonjour seem fancy enough that this seems like it should be doable.

  Read the article

• New power supply, now computer doesn't recognise hard drive?

  - by Mike

  Ok, I bought a new power supply, because my old one was too damn loud. I hooked it up to my PC, turned it on, everything is looking fine, start up detects my DVD drive, 2 hard disks.. then I get the message "BOOT FAILURE INSERT SYSTEM DISK". Now I've seen some other people talk about going into BIOS and changing the start up to the HDD and not the CD.. well I've done that and it doesn't help. If I let windows load up and it asks me to which partition I wish to install windows, no partition is present. It's as if after the initial start up the drives arn't being found. I plugged my old (but loud) PSU back in, connected up all the cables, and it works perfectly. Why does the new PSU not detect my HDD's after the first BIOS screen start up? Any ideas? :)

  Read the article

• Block complete network access for one local user

  - by tumchaaditya

  Well, this is quite trivial question but I could not find a satisfactory answer even after trying many search queries both here and on Google. I want to share my PC with my room-mate. And I don't want him to access ANY network(LAN included). So, I can create an account for him and block network access for the same. I would prefer avoiding any third-party tools as far as possible. It's a simple home PC hooked up to a router for internet. No domain and other stuff. (Technically, guest account can achieve this. But somehow, the guest account on my PC has network access!)

  Read the article

• Sending an email when an application crashes?

  - by Jay Kominek

  I've got a big piece of scientific equipment which is hooked up to, and controlled by software running on a Windows PC. Unfortunately the software, provided by the manufacturer, crashes occasionally when nobody is there to watch it. We'd really like a piece of software which could watch the application, and when it crashes, send out an email right away. Is there anything out there like that? EDIT: we want to monitor the application, which is a normal piece of Windows software, running on the PC. The mention of the equipment was just sort of background to explain why we cared.

  Read the article

• Mint 13 does nothing when laptop lid is closed

  - by ewok

  I have a laptop running Mint 13. I have it hooked up to a 30" monitor and have no use for the laptop being open, so I put it on a shelf and close it. When I do that, the monitor goes blank. The power manager does not have an option for doing nothing when the lid is closed. The options are "Blank Screen", "Suspend", and "Shutdown". Is there a way to make the laptop not go to a blank screen when the lid is closed?

  Read the article

• DNS point to server on ISP and keep shared host too?

  - by Dwayne

  I know this is probably quite easy to do, but I might just have the right search sorted out... so here is the situation: We have example.com set up as a hosted server along with app1.example.com, app2.example.com and a few others. What I would like to do is set up the right zone file to also make our internal server addressable from the outside world as internalapp.example.com. This server sits behind a firewall (pfsense) and is hooked up to the world via a cable modem that is technically on DHCP from our ISP, but has had the same external IP for the past 15 months so far. What would be the best way to set this up?

  Read the article

• Are there any Spreadsheet apps that are as easy and powerful to use as Vim?

  - by ovatsug25

  I'd like to use a spreadsheet that lets me move around cells like I do in Vim. As well, the more commands that are attributed to keyboard shortcuts, the better. Particularly stuff like making Text-to-Columns which is one of my more frequently used features in Excel. I don't mind learning the shortcuts if they allow me to just look at the spreadsheet page and forget about everything else. edit: The way I am thinking about the Spreadsheet right now is as if every cell is its own unique file. There should be a command where I choose to open that file and edit it right on the spot within the view of the spreadsheet. So I guess I want different modes like in vim which have commands and there should be one mode that is hooked up just to do operations or formatting which would be similar to command mode in Vim.

  Read the article

• External speakers no longer working

  - by Mark Robinson

  We have a Windows Vista laptop. On Monday we hooked it up to external speakers, as we always do, and they worked fine. On Tuesday, we did the same but then the speakers did not work. Weirdly, the laptop internal speaker does work. Nothing was changed between Monday and Tuesday. What happened and, more importantly, how can it be fixed? BTW we tested with other speakers (and cable) and that didn't help. So it seems like a laptop issue.

  Read the article

• Windows hiding other user's files?

  - by JoshJordan

  I had a hard drive whose windows installation (running Vista) became corrupt. I bought a new hard drive, installed Windows 7, and hooked up the old drive using an external enclosure. The Users folder on the old drive shows the users that existed on the machine, but it doesn't show any of the contents of them. I assume this is due to not having the permissions I need. I have "taken control" of the folders I'm interested in, but this didn't prompt me for the original owner's password as I expected, and I still can't see the file contents. I would guess that this is a fairly common issue, but I'm not sure what to Google here. How can I get access to files in that drive's User directory?

  Read the article

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

• Sharing a printer on Windows home network

  - by Jeff

  I have a home network, and I'm trying to share a printer connected to one of the PCs. The wireless modem through which the internet comes through doesn't reach the entire house, so we have another router set up as well. The modem is 192.168.1.1 (let's call this A) and the router is set up as 192.168.1.100 (let's call this B). Subnet masks 255.255.255.0. The printer is hooked up to a PC on B. If my laptop is connected wirelessly to B, it can see the printer. However, if it's connected to A, it doesn't show up in My Network Places. How can I get it so that I can print to the printer regardless of whether the

  Read the article

• Can DVI look different?

  - by queueoverflow

  I have a desktop with an nVidia GT 9500 which has two DVI slots. I have a 24" TN-Panel TFT on that and it looks pretty good. Then I hooked it onto the DisplayPort of my ThinkPad with the Intel HD 3000 card with an DP-DVI adapter and I think that the fonts look even clearer. Both computers run Kubuntu 12.04, although the ThinkPad is freshly set up, while the desktop is migrated from the previous release. Is this a hardware thing or is it just some setting in the anti-aliasing or sub-pixel-hinting?

  Read the article

• Command line, determine 64 or 32 bit?

  - by svnpenn

  I need to reinstall Windows on a laptop. I have the product key (its on the laptop), and I know it is Windows 7 Home Premium. I need a way to determine if 64-bit or 32-bit Windows is installed, so that I can download the correct one from Microsoft. The computer is messed up so I do not have access to Windows to check it with systeminfo. I took out the hard drive and hooked it to another computer, but when I run systeminfo it just gives information for the host computer, I did not see a way to change this.

  Read the article

• Time Capsule + Ubee Router?

  - by Charlie

  I can't for the life of me figure this out. I recently had TWC installed in my house, and wanted to disable the NAT and router functions of it. I have a Time Capsule hooked up to it from LAN1 (on the Ubee) to the WAN port on the TC. The problems started occurring here. I figured the settings would be these: Ubee Configuration mode: Bridge DHCP: Off TC IPv4: 192.168.100.2 Subnet Mask: 255.255.255.0 Router Address: 192.168.100.1 DNS Servers: 8.8.8.8, 8.8.4.4 Router Mode: DHCP and NAT But using those settings, my TC says "Double NAT", so I have to change it all around to the default settings of the Ubee using NAT. This leads me to believe bridge mode doesn't actually turn off NAT...

  Read the article

• Why is text on my TV monitor all grainy?

  - by searchfgold6789

  I have successfully installed the Catalyst drivers and hooked up my 1080p TV to the Radeon HD 5750's HDMI port and now it is working. There only seems to be one issue - most images appear OK, at least to my eyes, but text is grainy and difficult to read (not sure how well it can be seen in the picture): It works fine with a smaller screen, and hopefully you can see it with the new pictures which are only slightly better, but images are rendered a little funny too. Changing antialiasing does nothing and changing the refresh rate only makes a slight change if any. The small monitor I have works fine. Smaller resolutions such as 1024x768 look OK but are the wrong aspect ratio. I have tried renaming the input mode on the TV to "PC", and that helped... a little bit. Also, I tried a different PC with the same result. Messing around extensively with the ATI Catalyst Control Center also did not help. I am wondering if there is anything else I can try to increase the quality so it is more usable.

  Read the article

• Agressive Auto-Updating?

  - by MattiasK

  What do you guys think is best practice regarding auto-updating? Google Chrome for instance seems to auto-update itself as soon as it get's a chance without asking and I'm fine with it. I think most "normal" users benefits from updates being a transparent process. Then again, some more technical users might be miffed if you update their app without permission, as I see it there's 3 options: 1) Have a checkbox when installing that says "allow automatic updates" 2) Just have a preference somewhere that allows you to "disable automatic updates" so that you have to "check for updates manually" I'm leaning towards 2) because 1) feels like it might alienate non-technical users and I'd rather avoid installation queries if possible. Also I'm thinking about making it easy to downgrade if an upgrade (heaven forbid) causes trouble, what are your thoughts? Another question, even if auto-updates are automatically, perhaps they should be announced. If there's new features for example otherwise you might not realize and use them One thing that kinda scares me though is the security implications, someone could theorically hack my server and push out spyware/zombieware to all my customers. It seems that using digital signatures to prevent man-in-the-middle attacks is the least you could do otherwise you might be hooked up to a network that spoofs the address of of update server.

  Read the article

• Aggressive Auto-Updating?

  - by MattiasK

  What do you guys think is best practice regarding auto-updating? Google Chrome for instance seems to auto-update itself as soon as it get's a chance without asking and I'm fine with it. I think most "normal" users benefits from updates being a transparent process. Then again, some more technical users might be miffed if you update their app without permission, as I see it there's 3 options: 1) Have a checkbox when installing that says "allow automatic updates" 2) Just have a preference somewhere that allows you to "disable automatic updates" so that you have to "check for updates manually" I'm leaning towards 2) because 1) feels like it might alienate non-technical users and I'd rather avoid installation queries if possible. Also I'm thinking about making it easy to downgrade if an upgrade (heaven forbid) causes trouble, what are your thoughts? Another question, even if auto-updates are automatically, perhaps they should be announced. If there's new features for example otherwise you might not realize and use them One thing that kinda scares me though is the security implications, someone could theorically hack my server and push out spyware/zombieware to all my customers. It seems that using digital signatures to prevent man-in-the-middle attacks is the least you could do otherwise you might be hooked up to a network that spoofs the address of of update server.

  Read the article

• Hooking up many different external HDs simultaneously

  - by cbizz

  I need a large amount of external storage for an upcoming project. I'm planning on purchasing 10 2TB external drives. I need them all hooked up to a single machine at the same time. What issues will I run into? I plan on using 2 power strips and having them all externally powered from the wall. I will use a USB hub to plug in all the drives. I need drive access time to be as fast as possible. I am using Ubuntu Linux(64 bit). Will I be able to mount 10 drives?

  Read the article

• Router for Infrastructure Network

  - by amfortas

  We have an HPC operation that down the years has grown to several racks of gear at three sites, hooked up via Gigabit fiber and Catalyst 2960s (we control the links and switches). Thus far all machines have been on a flat RCF1918 10/8 but we are looking to segment the network in order to streamline matters for iSCSI and generally keep infrastructure equipment away from our end-users. We have now reached a point where we need to consider introducing VLANs for specific subnets and are wondering if it would be worthwhile in the longer run to acquire a small router to keep to keep track of all this stuff and cut down on the complexity of netmasks and routes on host machines, etc. Has anyone here had a similar experience? Suggestions as to suitable equipment would be welcome.

  Read the article

• Can most Intel processors run 64-bit Windows 7?

  - by Jian Lin

  Can most Intel processors run 64-bit Windows 7? Such as all the i7, i5, Core 2 Duo, Dual Core, Single Core with HT, and even just Single Core? I think a popular view is that if you can run 64-bit Windows 7, then use it? It might have driver compatibility issue but if there is no device hooked up, then there is no problem? What about some software / games not compatible with the 64-bit version or may run slower? thanks. update: a couple of my machines have 4GB RAM. so 64-bit Win 7 can make use of the full 4GB RAM instead of only about 3.2GB

  Read the article

• Ubuntu Volume overriding settings set in Alsamixer

  - by Hayek

  Problem: How do I "lock in" the volume I set through alsamixer? I'm running Ubuntu 9.10. I adjusted the bass/treble columns in alsamixer but changing the system volume resets them all back to 100% I did save the settings by running alsactl store but everything is reset once I touch Ubuntu's volume icon in the top menu bar. This is rather painful because the computer is hooked up to a 650watt system with a massive subwoofer. As much as I enjoy my music, there's no need to have the walls vibrate :) What can I do to prevent Ubuntu from overriding the settings?

  Read the article

• How to get a windows domain server to recognize a linux machine by its name?

  - by CaCl

  In my company I ran into an issue where we have a linux machine that serves up a Subversion repository. Its hooked up via LDAP to the Active Directory. We got an account setup for an application and they set the Limited Workstations up so it didn't have full access to the network. The problem is that even though the hostname for our machine resolves correctly for me, the credentials for the application account seem to come back as not being allowed based on the name (the error was related to authorized workstations). I don't have access to any of the domain servers but it might be helpful to come at the management or high-level techs with some ideas, they don't seem to have a solution besides allowing all workstations for the user. Does anyone have any idea on how to get my linux machine to properly identify itself with the Domain machine by name?

  Read the article

• How do I get my XFX Radeon HD 7870 to work with 3 monitors using HDMI, DVI, and Mini DisplayPort?

  - by user88792

  I bought a XFX Double D FX-787A-CDFC Radeon HD 7870 and set it up using the HDMI, DVI and Mini DisplayPort (using an Apple mDP-to-VGA adapter). I hooked it up, installed the drivers and rebooted. The image came up on the third monitor in a weird resolution. Why did this happen and how can I fix it? I am using Windows 7 Ultimate and the system is completely updated. Side note: When I disconnect the Mini DisplayPort adapter it works fine, however for my work I need 3-4 monitors.

  Read the article

• Is there a way for me to test my [closed]

  - by Jimi

  I have a home network with a cheap-o little router with a development server and a few devices hooked up to it. I am finding that backups of my server are taking FOREVER (a week for 60gb) running backups renders my internet connection useless from any other box int he house. I have maxed out the pipe to my house from the ISP (10down, 3up), but is there a way for me to test and see if my router is bottlenecking anything? I feel like 60gb backups shouldn't take this long so any help would be great!

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >