Search Results

Search found 1150 results on 46 pages for 'partitioning'.

Page 11/46 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• Gparted funkiness - won't recognize 1TB, full-hdd /home partition, but recognizes ext4 and /home label

  - by Kurtosis

  I have a 1TB SATA hard disk from my old desktop, and the entire thing is an ext4 /home partition (/, /boot, and swap were all on another hdd). It is now in a USB2 enclosure and I want to use it to back up my current laptop /home. To do this I need to shrink the /home partition on the 1TB backup drive. It only uses about 500GB so that shouldn't be a problem, I'll start the laptop with an Ubuntu live USB, plug in the 1TB drive, and use Gparted to shrink the 1TB /home partition to ~500GB. Then I can create a second partition in the newly freed space, and cp -ax my laptop's /home over to it. Unfortuntely, Ubuntu Live USB can detect and mount the external hdd, and Gparted can see it's there, but Gparted can't read it and hence can't resize it. Disk Utility reports the drive is fine, no errors, so I'm not sure what's the problem. See linked pics, worth a thousand words. Anyone know what the problem is here? Any pointers in the right direction much appreciated.

  Read the article

• Install GRUB to Ubuntu Partition

  - by Noel

  So my computer has the following partitions: /dev/sda -- (I know this isn't a real partition, but more so the boot loader) /dev/sda1 -- (Windows 7 Boot Loader) /dev/sda3 -- (Windows 7) /dev/sda4 -- (Data partition, NTFS) that means i have /dev/sda2 as free space. I do not want to change the MBR of the computer. I would like /dev/sda2 to contain GRUB AND Ubuntu. So ideally when I turn my computer on, BIOS would ask if I'd like to boot Windows 7 or Ubuntu(or Grub or partition 2), and I could choose either one. But I would like Grub and Ubuntu to be on the same partition, so they will not interfere in any way with windows or window's boot loader/partition (sda3) How can I do this? Catch: when formatting partitions, Ubuntu does not give me the option to make them virtual partitions, so that makes things harder. I tried: installing Ubuntu to /dev/sda2 (which I formatted as ext4) and then told the Ubuntu installer to install the bootloader to /dev/sda2. But when I select "Ubuntu" from BIOS's boot selection, it loads a black screen and says "invalid arch independent ELF magic grub rescue _" and allows me to input stuff. How can I fix this, or tell my computer where Grub is?

  Read the article

• Boot-Repair after messing up NTFS partition

  - by QuietThud

  I posted this question explaining what happened after I tried to create a new swap partition on a Win/Ubuntu dual-boot machine. I have since created a live-boot USB and installed Boot-Repair. I had it "recommend repairs", after which it tried repairing the wubi filesystems, which as far as I'm aware was not necessary. I'm not sure where to go from here; I don't care very much about backing up my files, I just want to be able to boot the machine. In the Advanced Options the "Repair Windows boot files" box is uncheckable both GRUB tabs are unclickable (I do have GRUB installed) Here is my Pastebinit with the details from the Boot-Repair. Please be as explicit as possible, as I am proving to be disproportionately bad at this type of task. Thank you! P.S. I keep seeing: cryptsetup: WARNING: failed to detect canonical device of overlayfs cryptsetup: WARNING: could not determine root device from /etc/fstab TestDisk: GPARTED:

  Read the article

• Is there a current tool to build your boot / partition on hard drive?

  - by ????

  I tried Windows 8 Consumer Preview a couple months ago and it wiped out my partition table... or the boot information. So now the machine cannot boot to anything at all. Is there Ubuntu tools or Linux tool that can fix all the partition and make them boot again? (The partitions have Windows 7 and Vista on them. I run Ubuntu as a VM on Win 7). I tried another tool running on Vista and was able to see the Win 7 partition, except that tool wiped out the Vista boot info later on.

  Read the article

• solve a partition misalignment?

  - by learner

  I have a new Dell XPS laptop which had Windows 7 installed in it. It also had a default extra partition for "Dell Utility". I installed Ubuntu in it on an Extended Partition along with windows and specified the logical partitions myself (for /,/home and swap). Now when I open Disk Utility , it shows this "Partition misaligned by 512 bytes" error for the Dell Utility partition and "Partition misaligned by 1024 bytes" for the entire Extended partition where Ubuntu is installed. Deleting the extended partition and re-installing Ubuntu may solve the problem of misalignment in the extended partition. But how about the Dell Utility partition? If I re-install Windows 7 Dell Utility wouldn't be a part of the re-install. So that may not solve it either. How do I fix this? Note: The extended partition I made contains an NTFS logical partition for holding data accessible by both OSes(basically a personal data partition). EDIT: I deleted all my Ubuntu partitions and re-installed Ubuntu like before,this time making them partitions with GParted via LiveCD. Now the only problem is that there is a misalignment in the Dell Utility partition. The other misalignment got fixed. Now how do I get rid of that issue?

  Read the article

• Laptop won't boot or enter BIOS after deleting partition in Windows 7

  - by user111649

  I dual boot my computer and later decided to delete one of the Ubuntu partitions while using Windows 7. After my computer hibernated and I tried restarting my ASUS laptop it stopped at the logo and preventing me from entering the BIOS. When I take out my hard dive it allows me to enter the BIOS. It does not boot from a CD if the hard drive is still attached to the computer. After taking the hard drive out then it boots from the CD. Can someone please help?

  Read the article

• Issues with LVM partition size in Server 13.04

  - by Michael

  I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

  Read the article

• How can I set up FakeRAID/SoftRAID using mdadm without losing data?

  - by Danatela

  There is RAID0 of 2 drives connected through Silicon Image 3132 SATA SoftRAID controller. Under Windows it was partitioned as one dynamic GPT-disk having 4 TB NTFS volume. There is a lot of music and movies on the drive. I'm trying to get him to be seen under Ubuntu as a single disk, not as 2 by 2 terabytes. I tried to read it through dmraid, had no success, it is not displayed in /dev/mapper. Also tried to configure the kernel, but did not find anything suspicious, the driver for my controller was on. There is also a driver from the manufacturer, but it is only available for RHEL and SLES. Here it's reported that SoftRAID is supported by the kernel, but apparently not completely. If I thrust drives in the AMD controller, built into the motherboard, the drive is seen as a single, but the data is lost. I know about mdadm that it is able to ditch all the information on the disks. So, is it possible to somehow create an array without actually recording information on used drives and to make the system correctly identify sections on it later? Information about the array: /dev/sdf - Disk 0 /dev/sdg - Disk 1 Array type: Stripe Block Size: 64KB Also, a device /dev/md1 is created using command mknod /dev/md1 b 9 1

  Read the article

• Folder Permissions for new partition - can't move files

  - by user292743

  I'm using Ubuntu 14.04. I used the install CD to repartition my HD by resizing /dev/sda1 and creating /dev/sda3 as a Primary Partition. I named it "Media". When I reboot from HD, when I try to move files from the home directory to the new partition, I get an error message "Error while copying. The folder “TV” cannot be copied because you do not have permissions to create it in the destination." The new partition shows up in Gparted as locked, with mount point /media/ian/Media and Label Media. I want to move my media files from the boot partition to a separate partition. Any advice?

  Read the article

• Grub Rescue Error: Unknown Filesystem

  - by James

  I was trying to dual boot Windows with Linux (linux installed first). I read that it was easier to do so if windows was installed first. So I tried to install windows, by creating a partition for it. There wasn't enough room on the drive so I tried changing the filesystem of my existing partition to support windows. Now whenever I try to start my computer I get the grub rescue screen. I've tried booting from CD and USB with ubuntu and also with windows, but nothing happens. I ran ls in grub rescue and got hd0, (hd0,msdos5), cd (with an install disc inserted), fd0, and fd1. However if I run ls on any of these I receive the error: unknown filesystem. Can anyone help me out?

  Read the article

• Partition resize

  - by borax12

  I have a dual boot system with 1.C:drive with windows 227 GB 2.E: drive in windows 185 GB 3.Ext4 Ubuntu - 38 GB 4.Linux swap - 4 GB I want to decrease the space from E: drive from 185 GB to say about 160 GB and assign the 25 GB achieved from the resizing to the ext4 partition so that my ubuntu home has more space I was told that do a resize in gparted could cause some boot problems,please tell me a safe way to achieve this resizing

  Read the article

• Trying to recover deleted Ubuntu partition

  - by user110984

  I made a mistake in logging into my 200 GB Ubuntu partition. I could not access Grub after that. Using a live CD I then ran Boot_Repair and apparently deleted the partition, I guess because I ran it from my 70 GB Windows partition. I can send the results of boot_info before that and of Boot_Repair. Then I ran TestDisk, which apparently found only dev/sda/ -320GB / 298 / GiB - WDC - WD3200BEVT-22A23T0 (Was there any more I could have done with TestDisk? I looked at the TestDisk_Step_By_Step example and found no way forward given that no other partitions turned up) I have run gpart and found this: /sda1 - 15 GB /sda2 - system reserved /sda3 - 70.15 GB /sda4 - extended 212.84 unallocated - 209.10 /sda5 - unknown 3.74 . I have been told I can recover the partition using gparted's Rescue start end command, but I don't know what to enter for start and end. [--EDIT: TestDisk Deeper Search stated that "the following partitions can't be recovered" and listed a 220-GB Linux partition 6 times. Then it stated that "The current number of heads per cylinder is 255 but the correct value may be 128" and I could try to change it in the Geometry menu (because apparently these are overlapping partitions) So should I do that?--]

  Read the article

• Installing Ubuntu on btrfs over multiple drives

  - by Tom Ato

  When I installed Ubuntu 13.04, I managed to combine a couple of outdated askubuntu answers, as well as some of the btrfs documentation in order to figure out how to install Ubuntu over two SSDs using a single btrfs partition (I think /boot was on a small ext4 partition). I want to install Ubuntu 13.10 in a similar way, using a single btrfs partition striping data over the two SSDs, but I don't feel comfortable synthesizing a method that I am sure will work with current software. What is the best way to partition and install Ubuntu over two SSDs using btrfs, in an effectively RAID 0 way?

  Read the article

• installing ubuntu 12.04 along windows xp and windows 7

  - by Anand A J

  I have Windows XP installed on C drive and Windows 7 installed on F drive. I want to install Ubuntu 12.04 alongwith Windows (keeping both XP and 7) in drive G with out losing any data stored in the computer. I have a hard disk of 500 GB size with C (14.8 GB left),D,E,F, and G (15.7 GB left). I tried to install Ubuntu 12.04 from DVD and getting stuck at the time of selecting partitions .! How to select the device for boot loader installation? Will the installation of Ubuntu into G drive affects the data stored in the hard disk or in G drive especially? After installing Ubuntu can I use Windows XP and Windows 7? This is my first attempt to use Ubuntu. Can any body help me please?

  Read the article

• Installer can't find any partition

  - by petter

  I have a ubuntu 11.10 cd which I burned. And when I try to install Ubuntu I come all the way until it tells me to format partitions / choose partitions. And it can't see ANY partition at all. I have Windows 7 at the moment. I really don't know what the problem is, I've been googling it and searching the forums but no luck. I tried to install with WUBI and rebooted it. And when I was in "ubuntu", at the desktop in ubuntu a error came up telling me to choose a partition. I have no clue what the the problem is... My computer is a Packard Bell model ixtreme m5150 and I don't know what motherboard I have unfortunately. I didn't build it. Please help me.

  Read the article

• Ubuntu partitions on Dell XPS13

  - by Francois

  I bought a Dell XPS13 with ubuntu 12.04 pre-installed. I want to reformat and repartition the machine but as I'm far from being a linux guru, I'm afraid to erase something important that could have been preinstalled by Dell. On the disk, there are 3 partitions: /dev/sda1 - Ext4 Linux bootable 248GB - witch is the system+user partition I guess, /dev/sda2 - Extended (?) of 8GB - What is this partion about? /dev/sda5 - Linux Swap of 8GB - whitch is for RAM and need to be reconduct (why only 1xRAM and not 2?) Do I have to care about /dev/sda2 ? According to you can I reformat to create a partition for /home whitout losing anything important (except user data of course) ? Thank you for your help

  Read the article

• Looking for a disk manager that has options for setting allocation sizes in paritions

  - by mango

  I'm looking for a GUI program that is compatible with Ubuntu 13.10 - Server X86-64 that has all the features of Gparted but also allows for setting custom allocation sizes when creating a partition. Eg: Ability to create a 4gb Fat32 parition with 32 kilobyte allocation size. Please don't suggest a terminal only application, no matter how awesome it might be, because that's not what I asked. Wow, I come off like a right up prick when I write, eh?

  Read the article

• Ubuntu installation does not recognize drive partinioning

  - by Woltan

  I have a 1TB drive and installed Windows 7 on a 128GB partition. When I now try to install Ubuntu 11.04 it does not recognize the Windows partition but offers the complete 1TB drive to install Ubuntu on instead. It displays: However, in the Ubuntu Disk Utility the Windows partitions are recognized. What do I need to do in order for Ubuntu to recognize the Windows 7 partition and install Ubuntu as a dual boot? Response to comments The following commands were executed and the results are shown below: fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x34a38165 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 16318 130969600 7 HPFS/NTFS Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x14a714a6 Device Boot Start End Blocks Id System /dev/sdb1 1 60801 488384001 83 Linux parted -l Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Problem while installing (K)ubuntu 14.04

  - by Armin

  Im trying to install Kubuntu 14.04 along-side Windows 7 x64 but there are problems in Disk Setup section, installer does not show my drives properly as they are, i left drive empty to install Kubuntu but this drive does not shown at all and all drives are listed some way un-regular. this is how my drives really are: i want to install Kubuntu in my drive D but this is how Disk Setup is showing my drives: and when i click on manual: i even shrink-ed my drive D to assigning for root, home and swap but there are bot shown to be chosen. where is the problem? how can i tell installer to assign the drives that i want?

  Read the article

• I can't find my "WIndows 8" Partition

  - by abhi_nash

  My girlfriend had her Dell Pre-Installed with Windows Vista when she bought it,then she upgraded it to Windows 7 and then 8.Since she wanted an Operating System which is fast and powerful i suggested Ubuntu for her.She runs a Dell Inspiron 1420 with 2 gigs of ram and an Nvdia 8400M GS,though the laptop is a bit old,it does her things like a dream. So,I have used a Flash Drive(8 Gigs) to install Ubuntu 13.04 on her system and used "Overwrite the Windows 8 OS".Then afterwards when I logged in I can't find any of her files which was on her WIndows 8 installation. Anyone know a work around with this?!

  Read the article

• Moving Ubuntu to a new hdd

  - by jaurisan

  I have a 300gb hdd which I am currently using on my older PC. Now I want to have a copy of those 300GB into a new 1TB hdd (installed in a new computer). My "problem" is that the 1TB hdd already has a 50GB partition with a Win XP (the rest of the space is not partitioned). The 300GB disk has a 240GB partition for Ubuntu, and the rest is a FAT partition which I don't care if it gets copied or not to the new disk. So how can I transfer the entire Ubuntu to the new hard disk and still being able to boot the XP? Is there a way or tool that can help me do over LAN? So I wont have to take out the hdd from the new pc and put it in the older to do the copy.

  Read the article

• how to recover deleted ntfs patition with data entirely while installing ubuntu 13.04

  - by Anson Varghese

  I've installed ubuntu 13.04 onto my hp 2231tx computer. During installation all of my data was erased. I didn't know all of my three partitions would be deleted. I was shocked after finding out that all of my personal data was erased. I didn't know what to do to resolve this problem so I search google for an answer. I found a program called testdisk and I used it to recover about half of my data. Among this data weren't my personal photos and videos. Is there a way to recover the other half?

  Read the article

• Why is my dual-boot Ubuntu partition showing up as a peripheral "root.disk"?

  - by Don

  I recently installed Ubuntu 12.04, which I had been booting from a usb key, as a dual-boot on my machine running Windows 7. From what I had read online while researching, I was prepared to have to shrink the Windows partition and all that. But I never had to - it really was just a few clicks here and there and it was installed. I'm still pretty confused about it, but whatever, it worked, and the two peacefully coexist on my machine, and I have broken things to fix before I worry about fixing unbroken things. So yesterday I got it in my head to look at my partitions (I was considering making an all new partition to install the Windows 8 Release Preview). What I saw confused me. Here's a screenshot of the disk utility. At this moment, there is nothing connected to my computer, and nothing in any of the optical drives/ports/card readers/etc. Can you help me figure out what's going on here? Don's Machine is, I believe, my Windows partition - that's the name I assigned my machine from Windows Explorer. PQSERVICE is from what I can find online also Windows, but having to do with backup. And SYSTEM REQUIRED, if I browse it in Ubuntu, is definitely something to do with booting, and I believe it is also Windows'. According to the sizes shown, those three together should use up my 500 GB HD. Then further down, as a "peripheral device", it lists that 31 GB disk. This is obviously my Ubuntu (Model:Linux Loop:root.disk), but why is it showing up as a peripheral? So, to sum up those questions and to add some more random ones I had: Why is Ubuntu showing up as a peripheral device? If the Windows sections take up all 500 GB, where does Ubuntu live? If I renamed the disk partitions, would my life become a nightmare (seriously - can I safely rename them)? Why didn't I have to resize the Windows partition in the first place? Would giving Ubuntu more space improve its performance (it hangs alot)? Is it possible to have a partition for each OS (Windows 7 & 8, Ubuntu), a partition for files, and a separate partition for backups? Is this towards the good or bad idea end of the spectrum? @Elfy, would that explain why it keeps hanging? I guess I'll backup my files, rip it out, and reinstall it correctly later on today.

  Read the article

• Dual boot problem - Ubuntu windows 7

  - by Benoit Roberge

  I've been using Ubuntu for a while on my laptop. Recently, I decided to install Ubuntu on my main desktop PC (dual boot with windows 7). I downloaded the Ubuntu installer for windows and installed it (it's now showing Ubuntu in the installed software in my W7 control panel). However, when I tried to boot Ubuntu, after the boot loader and the login screen, my screen splitted in half. I was not able to see the icons and the launcher. I was also not able to do anything. I uninstalled Ubuntu and tried again twice. Same thing/results. Then, I created a partition in W7 and installed Ubuntu on it. Unfortunately, it's doing the same thing. I never saw something like this. Any idea??? Thanks for your help and support.

  Read the article

• Data Recovery using testDisk failing!

  - by iamcreasy

  I am trying to recover an accidentally formatted partition using testDisk, After selecting the partition[pic 1] and selecting Undeleted[pic 1], it says, No deleted file found.[pic 2] 1 2 I know it's a silly question, but I just want to make sure that those data are really out of reach. Or is there anything I can do to recover them? :( I tried to repair my partition table using bootrec.exe/FixMBR & bootrec.exe/FixBoot, can this be the reason why testdisk can't work anymore? I haven't written anything on that partition. Is there any low level approach to retrieve all the lost data?

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >